Conflicts:
library/ccm.c
Conflict resolved by re-applying the MBEDTLS_BYTE_0 macro.
Conflict resolved by ignoring the MBEDTLS_PUT_UINT16_BE macro
used in development branch on the 'b' buffer, because the 'b'
buffer is removed in current branch.
exchange groups of the byte reading macros with MBEDTLS_PUT_UINTxyz
and then shift the pointer afterwards. Easier to read as you can
see how big the data is that you are putting in, and in the case of
UINT32 AND UINT64 it saves some vertical space.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
exchange groups of the byte reading macros with MBEDTLS_PUT_UINTxyz
and then shift the pointer afterwards. Easier to read as you can
see how big the data is that you are putting in, and in the case of
UINT32 AND UINT64 it saves some vertical space.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Move common encrypt / decrypt code into common function, and roll in
previously refactored setup checks function, as this is now the only
place it is called.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
minor changes, such as improving the documentation for the byte reading
macros, and using MBEDTLS_PUT_UINT16_xy in place of byte reading
macro combinations
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Replace the contents of MBEDTLS_PUT_UINTx_yz contained inconsitent
but similar/duplicate code to the MBEDTLS_BYTE_x macros. Therefore
the contents of the macros now utilise the byte reading macros.
MBEDTLS_PUT_UINT64_LE's written order was also not consitent with
the other PUT macros, so that was modified.
Documentation comment said LSB instead of MSB and that has also been
resolved.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
byte shifting opertations throughout library/ were only replaced with
the byte reading macros when an 0xff mask was being used.
The byte reading macros are now more widley used, however they have not
been used in all cases of a byte shift operation, as it detracted from
the immediate readability or otherwise did not seem appropriate.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Copy over the GET/PUT_UINT64_LE/BE macros from aes.c and sha512.c
Add the MBEDTLS_ prefix to all 4 macros.
Modify the GET_UINT64 macros to no longer take a target variable
as a parameter, so when the macro function is called it must be
assigned to a variable in the same statement.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
The CHAR macros casted to an unsigned char which in this project
is garunteed to be 8 bits - the same as uint8_t (which BYTE casts
to) therefore, instances of CHAR have been swapped with BYTE and
the number of macros have been cut down
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
aria.c has a shift by 3 bytes, but does not use the 0xff masking.
aparently this is not a problem and it is tidier to use the maco.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Imrpoved the descriptions of the macros and parameters and
changing the name of the MBEDTLS_PUT_UINT... macro parameters
to be more descriptive
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
These cast to an unsigned char rather than a uint8_t
like with MBEDTLS_BYTE_x
These save alot of space and will improve maintence by
replacing the appropriate code with MBEDTLS_CHAR_x
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
The GET macros used to write to a macro parameter, but now
they can be used to assign a value to the desired variable
rather than pass it in as an argument and have it modified
in the macro function.
Due to this MBEDTLS_BYTES_TO_U32_LE is the same as
MBEDTLS_GET_UINT32_LE and was there for replaced in the
appropriate files and removed from common.h
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Added documenttion comments to common.h and removed the changelog
as it is not really necessary for refactoring.
Also modified a comment in aria.c to be clearer
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Although these only appear in one file: psa_crypto_storage.c
it is tidy to give it the same prefix as the UINT32 macros
and to store them in the fame file
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
As per tests/scripts/check-names.sh, macros in
library/ header files should be prefixed with
MBEDTLS_
The macro functions in common.h where also indented
to comply with the same test
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
The use of the BYTE_x macro in nist_kw did not seem appropriate
in hind sight as it is working with a character array not an int
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
missed do-while around function-like macros (UINT32_BE and
UINT_LE macros) originally present in the indivdual files,
before being moved to common.h.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
32-bit integer manipulation macros (little edian):
GET_UINT32_LE and PUT_UINT32_LE appear in several
files in library/.
Removes duplicate code and save vertical
space the macro has been moved to common.h.
Improves maintainability.
Also provided brief comment in common.h for
BYTES_TO_U32_LE. comment/documentation will
probably need to be edited further for all
recent additions to library/common.h
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
32-bit integer manipulation macros (big edian):
GET_UINT32_BE and PUT_UINT32_BE appear in several
files in library/.
Removes duplicate code and save vertical
space the macro has been moved to common.h.
Improves maintainability.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
The macro BYTES_TO_U32_LE appears in poly1305.c and
chacha20.c.
Removes duplicate code and save vertical
space the macro has been moved to common.h.
Improves maintainability.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
To improve readability by saving horizontal and vertical space.
Removed unecessary & 0xFF.
Byte reading macros implemented in library/common.h, All files
containing "& 0xff" were modified.
Comments/Documentation not yet added to the macro definitions.
Fixes#4274
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
To keep consistent with ssl_{clien2t,server2}.
Change-Id: I08dbe47a3d9b778ba3acad283f608fef4e63c626
CustomizedGitHooks: yes
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
The psa_open_key API depends on MBEDTLS_PSA_CRYPTO_STORAGE_C.
This is unnecessary for builtin keys and so is fixed.
Updated an open_fail test vector keeping with the same.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Add the missing nonce length checks (this function is being used by
oneshot functions as well as multipart, and thus all cipher suites are
being used) and cover the case where a NULL buffer gets passed in.
Extended the set nonce test to cover this.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Remove error clearing from ccm_starts() and ccm_set_lengths().
Add error check in ccm_update_ad(), ccm_update() and ccm_finish().
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Move logic to ccm_starts, ccm_set_lengths, ccm_update_ad,
ccm_update and ccm_finish
Use separate variable to track context state.
Encode first block only if both mbedtls_ccm_starts() and
mbedtls_ccm_set_lengths() were called.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Base on version config, `handshack_{clinet,server}_step`
will call different step function. TLS1.3 features will
be gradully added base on it.
And a new test cases is added to make sure it reports
`feature is not available`.
Change-Id: I4f0e36cb610f5aa59f97910fb8204bfbf2825949
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
Check configuration parameter in structure setup
function to make sure the config data is available
and valid.
Current implementation checks the version config.
Available version configs are
- tls1_3 only
- tls1_2 only
issues: #4844
Change-Id: Ia762bd3d817440ae130b45f19b80a2868afae924
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
The helper `mbedtls_ssl_write_handshake_msg` writes a handshake message
and updates the handshake transcript.
With TLS 1.3, we need finer control over the checksum: updating
at message granularity is not sufficient. To allow for manual maintenance
of the checksum in those cases, refine `mbedtls_ssl_write_handshake_msg()`
into `mbedtls_ssl_write_handshake_msg_ext()` which takes a parameter
determining whether the checksum should be updated.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
- Improves readability
- Will be useful when we introduce MPS as an alternative msg layer.
- Will be useful when we need to reset the messaging layer upon
receipt of a HelloRetryRequest in TLS 1.3.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The AEAD additional data (AAD) is computed differently in TLS 1.3
compared to TLS 1.2, but this change hasn't yet been reflected in
the codee, rendering the current implementation of
```
mbedtls_ssl_{encrypt,decrypt}_buf()
```
not standard compliant.
This commit fixes this by adjusting the AAD extraction function
ssl_extract_add_data_from_record() and its call-sites.
Please see the documentation of the code for an explanation
of how the AAD has changed from TLS 1.2 to TLS 1.3.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
This commit adds the TLS 1.3 specific internal function
```
mbedtls_ssl_tls13_populate_transform()
```
which creates an instance of the SSL transform structure
`mbedtls_ssl_transform` representing a TLS 1.3 record protection
mechanism.
It is analogous to the existing internal helper function
```
ssl_tls12_populate_transform()
```
which creates transform structures representing record
protection mechanisms in TLS 1.2 and earlier.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
In TLS 1.2 specific code, the internal helper functions
ssl_populate_transform() builds an SSL transform structure,
representing a specific record protection mechanism.
In preparation for a subsequent commit which will introduce
a similar helper function specific to TLS 1.3, this commmit
renames ssl_populate_transform() to ssl_tls12_populate_transform().
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Instances of `mbedtls_ssl_session` represent data enabling session resumption.
With the introduction of TLS 1.3, the format of this data changes. We therefore
need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish
1.2 and 1.3 sessions.
This commit introduces such a TLS-version field to mbedtls_ssl_session.
The change has a few ramifications:
- Session serialization/deserialization routines need to be adjusted.
This is achieved by adding the TLS-version after the header of
Mbed TLS version+config, and by having the subsequent structure
of the serialized data depend on the value of this field.
The details are described in terms of the RFC 8446 presentation language.
The 1.2 session (de)serialization are moved into static helper functions,
while the top-level session (de)serialization only parses the Mbed TLS
version+config header and the TLS-version field, and dispatches according
to the found version.
This way, it will be easy to add support for TLS 1.3 sessions in the future.
- Tests for session serialization need to be adjusted
- Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3,
we will need to have some logic comparing the TLS version of the proposed session
to the negotiated TLS version. For now, however, we only support TLS 1.2,
and no such logic is needed. Instead, we just store the TLS version in the
session structure at the same point when we populate mbedtls_ssl_context.minor_ver.
The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and
`mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved.
However, with both fields being private and explicitly marked so, this can happen
in a later change.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Previous code checked that the buffer was big enough for the tag size
for the given algorithm, however chachapoly finish expects a 16 byte
buffer passed in, no matter what. If we start supporting smaller
chachapoly tags in the future, this could potentially end up in buffer
overflow, so add a safety check.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
The internal verify endpoint was only calling the finish endpoint to get
a tag to compare against the tag passed in. Moved this logic to the
driver wrapper (still allowing a driver to call verify if required) and
removed the internal implementation endpoint.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
We already did this on failure, but make sure the buffer does not leak
what was in it previously on success
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
mbedtls_ecp_read_key and mbedtls_ecp_write_key are updated to include
support for Curve448 as prescribed by RFC 7748 §5.
Test suites have been updated to validate curve448 under Montgomery
curves.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Remove a check in rsa_rsassa_pkcs1_v15_encode() that
is not needed because the same check is performed
earlier. This check was added in #4707.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Fix initialization of mbedtls_psa_cipher_operation_t by not initializing the mbedtls_cipher_context_t typed field completely.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Introduce new codes:
* MBEDTLS_ERR_SSL_UNSUPPORTED_EXTENSION
* MBEDTLS_ERR_SSL_NO_APPLICATION_PROTOCOL
These are returned when the corresponding alert is raised.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
New name MBEDTLS_ERR_SSL_BAD_CERTIFICATE
Also, replace some instances of MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE
by MBEDTLS_ERR_SSL_DECODE_ERROR and MBEDTLS_ERR_SSL_ILLEGAL_PARAMETER
as fit.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Also remove preprocessor logic for MBEDTLS_CONFIG_FILE, since
build_info.h alreadyy handles it.
This commit was generated using the following script:
# ========================
#!/bin/sh
git ls-files | grep -v '^include/mbedtls/build_info\.h$' | xargs sed -b -E -i '
/^#if !?defined\(MBEDTLS_CONFIG_FILE\)/i#include "mbedtls/build_info.h"
//,/^#endif/d
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
These macros were moved into a header and now check-names.sh is failing.
Add an MBEDTL_ prefix to the macro names to make it pass.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The error is currently never returned to any function that PSA calls,
but keep mbedtls_to_psa_error up to date in case this changes.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The functions mbedtls_pk_sign(), mbedtls_pk_sign_restartable(),
mbedtls_ecdsa_write_signature() and mbedtls_ecdsa_write_signature_restartable()
now take an extra parameter indicating the size of the output buffer for the
signature.
No change to RSA because for RSA, the output size is trivial to calculate.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We were already rejecting them at the end, due to the fact that with the
usual (x, z) formulas they lead to the result (0, 0) so when we want to
normalize at the end, trying to compute the modular inverse of z will
give an error.
If we wanted to support those points, we'd a special case in
ecp_normalize_mxz(). But it's actually permitted by all sources (RFC
7748 say we MAY reject 0 as a result) and recommended by some to reject
those points (either to ensure contributory behaviour, or to protect
against timing attack when the underlying field arithmetic is not
constant-time).
Since our field arithmetic is indeed not constant-time, let's reject
those points before they get mixed with sensitive data (in
ecp_mul_mxz()), in order to avoid exploitable leaks caused by the
special cases they would trigger. (See the "May the Fourth" paper
https://eprint.iacr.org/2017/806.pdf)
Signed-off-by: Janos Follath <janos.follath@arm.com>
Without this parameter, it would be hard for callers to know how many bytes
of output the function wrote into the output buffer. It would be possible,
since the cumulated output must have the same length as the cumulated input,
but it would be cumbersome for the caller to keep track.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The persistence level PSA_KEY_PERSISTENCE_READ_ONLY can now only be used
as intended, for keys that cannot be modified through normal use of the API.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_psa_get_stats() was written back before lifetimes were
structured as persistence and location. Fix its classification of
volatile external keys and internal keys with a non-default
persistence.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Clang was complaining and check-names.sh too
This only duplicates macros, so no impact on code size. In 3.0 we can
probably avoid the duplication by using an internal header under
library/ but this won't work for 2.16.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
We were already rejecting them at the end, due to the fact that with the
usual (x, z) formulas they lead to the result (0, 0) so when we want to
normalize at the end, trying to compute the modular inverse of z will
give an error.
If we wanted to support those points, we'd a special case in
ecp_normalize_mxz(). But it's actually permitted by all sources
(RFC 7748 say we MAY reject 0 as a result) and recommended by some to
reject those points (either to ensure contributory behaviour, or to
protect against timing attack when the underlying field arithmetic is
not constant-time).
Since our field arithmetic is indeed not constant-time, let's reject
those points before they get mixed with sensitive data (in
ecp_mul_mxz()), in order to avoid exploitable leaks caused by the
special cases they would trigger. (See the "May the Fourth" paper
https://eprint.iacr.org/2017/806.pdf)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
* development: (66 commits)
Document the return type change in the migration guide
Fix return type of example key export callbacks
Add change log
psa: mac: Add driver dispatch tests for psa_mac_verify
psa: mac: Add driver delegation support for psa_mac_verify()
psa: mac: Introduce psa_mac_compute_internal
psa: mac: Add driver dispatch tests for psa_mac_compute
psa: mac: Improve MAC finalization code
psa: mac: Add driver delegation support for psa_mac_compute()
psa: mac: Add MAC compute builtin implementation
psa: mac: Improve implementation of psa_mac_finalize_alg_and_key_validation()
psa: mac: Split psa_mac_setup()
psa: mac: Re-organize psa_mac_setup() internal function
Move export callback and context to the end of SSL context
Improve ChangeLog wording for key export
Remove return value from key export callback
Make key export callback and context connection-specific
Remove all occurrences of TLS < 1.2 PRF identifier
Remote key export identifier used for TLS < 1.2.
Add missing documentation for key export callback parameters
...
Ensure finish only called when encrypting and verify only called for
decrypting, and add tests to ensure this.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
I wrote a function to determine the base algorithm given a variant,
however this is already implemented by
PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Where hashlen was previously ignored when the hash length could be
inferred from an md_alg parameter, the two must now match.
Adapt the existing tests accordingly. Adapt the sample programs accordingly.
This commit does not add any negative testing.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The loop exits early iff there is a nonzero limb, so i==0 means that
all limbs are 0, whether the number of limbs is 0 or not.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix a bug introduced in "Fix multiplication producing a negative zero" that
caused the sign to be forced to +1 when A > 0, B < 0 and B's low-order limb
is 0.
Add a non-regression test. More generally, systematically test combinations
of leading zeros, trailing zeros and signs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In mbedtls_mpi_read_string, if the string is empty, return an empty bignum
rather than a bignum with one limb with the value 0.
Both representations are correct, so this is not, in principle, a
user-visible change. The change does leak however through
mbedtls_mpi_write_string in base 16 (but not in other bases), as it writes a
bignum with 0 limbs as "" but a bignum with the value 0 and at least one
limb as "00".
This change makes it possible to construct an empty bignum through
mbedtls_mpi_read_string, which is especially useful to construct test
cases (a common use of mbedtls_mpi_read_string, as most formats use in
production encode numbers in binary, to be read with mbedtls_mpi_read_binary
or mbedtls_mpi_read_binary_le).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix mbedtls_mpi_mul_mpi() when one of the operands is zero and the
other is negative. The sign of the result must be 1, since some
library functions do not treat {-1, 0, NULL} or {-1, n, {0}} as
representing the value 0.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Shifting TA and TB before the loop is not necessary. If A != 0, it will be
done at the start of the loop iteration. If A == 0, then lz==0 and G is
correctly set to B after 0 loop iterations.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix a null pointer dereference in mbedtls_mpi_exp_mod(X, A, N, E, _RR) when
A is the value 0 represented with 0 limbs.
Make the code a little more robust against similar bugs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
* development: (236 commits)
Changing the key length to 32 bytes in one of the PSA cipher setup tests
Removal of RC4 certs and fixes to docs and tests
Fix fd range for select on Windows
Refactor file descriptor checks into a common function
Removing global variable and moving variant function comment block
Fix typo in doc'n of session resumption API
Code review fixes
Fix warning in some configurations
Fix cmake build of fuzz_privkey
Fix async support in ssl_server2
Improve ChangeLog and migration guide entries
Use a proper DRBG in programs
Use the dedicated dummy_random in fuzzing programs
Fix cmake build of programs
Add ChangeLog and migration guide entries
Simplify internal code
Remove "internal RNG" code from ECP
Remove config option MBEDTLS_ECP_NO_INTERNAL_RNG
Add RNG params to private key parsing
Add RNG parameter to check_pair functions
...
Remove a case that cannot be triggered as PSA_ALG_SIGN_GET_HASH always
returns 0 for raw algorithms.
Signed-off-by: Janos Follath <janos.follath@arm.com>
PSA Crypto always passed MBEDTLS_MD_NONE to Mbed TLS, which worked well
as Mbed TLS does not use this parameter for anything beyond determining
the input lengths.
Some alternative implementations however check the consistency of the
algorithm used for pre-hash and for other uses in verification (verify
operation and mask generation) and fail if they don't match. This makes
all such verifications fail.
Furthermore, the PSA Crypto API mandates that the pre-hash and internal
uses are aligned as well.
Fixes#3990.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Introduce psa_mac_compute_internal with an
additional `is_sign` parameter compared to
the psa_mac_compute API. The intent is to
call psa_mac_compute_internal() from
psa_mac_verify() as well to compute the
message MAC.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Fix mbedtls_net_poll() and mbedtls_net_recv_timeout() often failing with
MBEDTLS_ERR_NET_POLL_FAILED on Windows: they were testing that the file
descriptor is in range for fd_set, but on Windows socket descriptors are not
limited to a small range. Fixes#4465.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Re-organize psa_mac_setup() to prepare the move
to a dedicated function of the additional checks
on the algorithm and the key attributes done by
this function. We want to move those checks in
a dedicated function to be able to do them
without duplicating them in psa_mac_compute().
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reverting some deleted tests and changing the deprecated algo
Deleting deprecated headers from /alt-dummy dir
Corrections to the comments
Removal of deleted functions from compat-2.x.h
Corrections to tests/data_files/Makefile
Signed-off-by: TRodziewicz <tomasz.rodziewicz@mobica.com>
For TLS, secp256k1 is deprecated by RFC 8422 §5.1.1. For X.509,
secp256k1 is not deprecated, but it isn't used in practice, especially
in the context of TLS where there isn't much point in having an X.509
certificate which most peers do not support. So remove it from the
default profile. We can add it back later if there is demand.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rewrite mbedtls_debug_print_mpi to be simpler and smaller. Leverage
mbedtls_mpi_bitlen() instead of manually looking for the leading
zeros.
Fix#4608: the old code made an invalid memory dereference when
X->n==0 (freshly initialized bignum with the value 0).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
TLS used to prefer larger curves, under the idea that a larger curve has a
higher security strength and is therefore harder to attack. However, brute
force attacks are not a practical concern, so this was not particularly
meaningful. If a curve is considered secure enough to be allowed, then we
might as well use it.
So order curves by resource usage. The exact definition of what this means
is purposefully left open. It may include criteria such as performance and
memory usage. Risk of side channels could be a factor as well, although it
didn't affect the current choice.
The current list happens to exactly correspond to the numbers reported by
one run of the benchmark program for "full handshake/s" on my machine.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Upgrade the default list of hashes and curves allowed for TLS. The list is
now aligned with X.509 certificate verification: hashes and curves with at
least 255 bits (Curve25519 included), and RSA 2048 and above.
Remove MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE which would no
longer do anything.
Document more precisely what is allowed by default.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Upgrade the default X.509 certificate verification profile
mbedtls_x509_crt_profile_default to the former value of
mbedtls_x509_crt_profile_next, which is hashes and curves with at least 255
bits (Curve25519 included), and RSA 2048 and above.
Document more precisely what goes into the default profile.
Keep the "next" profile unchanged for now.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This makes it easier to ensure that crypto_spe.h is included everywhere it
needs to be, and that it's included early enough to do its job (it must be
included before any mention of psa_xxx() functions with external linkage,
because it defines macros to rename these functions).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We know that Montgomery multiplication will never be called without an
RNG, so make that clear from the beginning of the function.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This is necessary for the case where the public part of an EC keypair
needs to be computed from the private part - either because it was not
included (it's an optional component) or because it was compressed (a
format we can't parse).
This changes the API of two public functions: mbedtls_pk_parse_key() and
mbedtls_pk_parse_keyfile().
Tests and programs have been adapted. Some programs use a non-secure RNG
(from the test library) just to get things to compile and run; in a
future commit this should be improved in order to demonstrate best
practice.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
- mbedtls_ecp_check_pub_priv() because it calls ecp_mul()
- mbedtls_pk_check_pair() because it calls the former
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
It was indirectly calling ecp_mul() without an RNG. That's actually the
rare case where this should be allowed, as ecp_muladd() is typically
used on non-secret data (to verify signatures or ZKPs) and documented as
not being constant-time.
Refactor a bit in order to keep the ability to call ecp_mul() without a
RNG, but not exposed publicly (except though muladd).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Fix trivial faulty calls in ECP test suite and ECP/ECJPAKE self-tests (by
adding a dummy RNG).
Several tests suites are not passing yet, as a couple of library
function do call ecp_mul() with a NULL RNG. The complexity of the fixes
range from "simple refactoring" to "requires API changes", so these will
be addressed in separate commits.
This makes the option MBEDTLS_ECP_NO_INTERNAL_RNG, as well as the whole
"internal RNG" code, obsolete. This will be addressed in a future
commit, after getting the test suites to pass again.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
(This commit is best reviewed using `git show -b` as indentation levels
have changed.)
The documentation already states that the RNG parameter is mandatory,
since PRs #4488 and #4515. There are several families of functions to
consider here:
- private-key operations (sign, decrypt) all call
mbedtls_rsa_private() where this commit adds a non-NULL check;
- encrypt operations need an RNG for masking/padding and already had a
non-NULL check since #4515 (conditional on \p mode before that)
- verify operations no longer take an RNG parameter since #4515
So, after this commit, all RSA functions that accept an RNG will reach a
non-NULL check before the RNG is used.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Removes conditional code blocks relating
to MBEDTLS_SSL_TRUNCATED_HMAC from ssl_cli.c
and ssl_srv.c.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Removes conditional code compilation blocks
and code paths relating to the
MBEDTLS_SSL_TRUNCATED_HMAC config option.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Implement one-shot MAC APIs, psa_mac_compute and psa_mac_verify, introduced in PSA Crypto API 1.0.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
mbedtls_dhm_get_value can be seen as either a copy function or a getter
function. Given the name and the semantics, it's more of a getter, even if
it "gets" by doing a copy. Therefore, put the context first, and the
selector next, leaving the output for last.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add two functions mbedtls_dhm_get_len() and mbedtls_dhm_get_bitlen() to
query the length of the modulus in bytes or bits.
Remove the len field: the cost of calling mbedtls_dhm_get_len() each time
it's needed is negligible, and this improves the abstraction of the DHM
module.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When MBEDTLS_RSA_ALT is defined, mbedtls_rsa_context does not necessarily
have fields called N and E of type mbedtls_mpi. Don't emit pk_debug
information with MBEDTLS_RSA_ALT. This is not ideal but at least the
library compiles.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
library/ecp_alt.h (declaring individual functions of the ECP module that can
be substituted, included when building the library with
MBEDTLS_ECP_INTERNAL_ALT enabled) clashes with ecp_alt.h (not provided,
declaring types of the ECP module when the whole implementation is
substituted, included when building the library with MBEDTLS_ECP_ALT enabled).
Depending on the search path during build, this can make MBEDTLS_ECP_ALT
unusable.
Rename library/ecp_alt.h to follow the naming convention of other alt headers:
MBEDTLS_XXX_ALT corresponds to xxx_alt.h.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Conflicts:
include/mbedtls/ssl.h
include/psa/crypto_struct.h
Conflicts fixed by using the code from development branch
and manually re-applying the MBEDTLS_PRIVATE wrapping.
Unrelated to RSA (only used in ECP), but while improving one
mbedtls_safe_cond_xxx function, let's improve the other as well.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
mbedtls_mpi_cf_bool_eq() is a verbatim copy of mbedtls_ssl_cf_bool_eq()
Deduplication will be part of a future task.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Remove padding parameters as mbedtls_rsa_init()
cannot return an error code when padding
parameters are invalid.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
mbedtls_rsa_set_padding() now returns the error
code MBEDTLS_ERR_RSA_INVALID_PADDING when
padding parameters are invalid.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This change enables automatic detection and consumption of Mbed TLS
library targets from within other CMake projects. By generating an
`MbedTLSConfig.cmake` file, consuming projects receive a more complete
view of these targets, allowing them to be used as dependencies which
properly inherit the transitive dependencies of the libraries.
This is fairly fragile, as it seems Mbed TLS's libraries do not appear
to properly model their dependencies on other targets, including
third-party dependencies. It is, however, sufficient for building and
linking the compiled Mbed TLS libraries when there are no third-party
dependencies involved. Further work is needed for more complex
use-cases, but this will likely meet the needs of most projects.
Resolves#298. Probably useful for #2857.
Signed-off-by: Chris Kay <chris.kay@arm.com>
Calling mbedtls_mpi_cmp_int reveals the number of leading zero limbs
to an adversary who is capable of very fine-grained timing
measurements. This is very little information, but could be practical
with secp521r1 (1/512 chance of the leading limb being 0) if the
adversary can measure the precise timing of a large number of
signature operations.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
ssl_server2 had a check that we never try to use a minor version lower
than 2 with DTLS, but that check is no longer needed, as there's no way
that would happen now that MBEDTLS_SSL_MINOR_VERSION_1 is no longer
public.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This commit removes the API
```
mbedtls_ssl_conf_ciphersuites_for_version()
```
which allows to configure lists of acceptable ciphersuites
for each supported version of SSL/TLS: SSL3, TLS 1.{0,1,2}.
With Mbed TLS 3.0, support for SSL3, TLS 1.0 and TLS 1.1
is dropped. Moreover, upcoming TLS 1.3 support has a different
notion of cipher suite and will require a different API.
This means that it's only for TLS 1.2 that we require
a ciphersuite configuration API, and
```
mbedtls_ssl_conf_ciphersuites()
```
can be used for that. The version-specific ciphersuite
configuration API `mbedtls_ssl_conf_ciphersuites_for_version()`,
in turn, is no longer needed.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The idiom "resize an mpi to a given size" appeared 4 times. Unify it
in a single function. Guarantee that the value is set to 0, which is
required by some of the callers and not a significant expense where
not required.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Since the internal function mpi_fill_random_internal() assumes that X
has the right size, there is no need to call grow().
To further simplify the function, set the sign outside, and zero out
the non-randomized part directly.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In real life, min << N and the probability that mbedtls_mpi_random()
fails to find a suitable value after 30 iterations is less than one in
a billion. But at least for testing purposes, it's useful to not
outright reject "silly" small values of N, and for such values, 30
iterations is not enough to have a good probability of success.
Pick 250 iterations, which is enough for cases like (min=3, N=4), but
not for cases like (min=255, N=256).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This comment is no longer in the specific context of generating a
random point on an elliptic curve.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_mpi_random() uses mbedtls_mpi_cmp_mpi_ct(), which requires its
two arguments to have the same storage size. This was not the case
when the upper bound passed to mbedtls_mpi_random() had leading zero
limbs.
Fix this by forcing the result MPI to the desired size. Since this is
not what mbedtls_mpi_fill_random() does, don't call it from
mbedtls_mpi_random(), but instead call a new auxiliary function.
Add tests to cover this and other conditions with varying sizes for
the two arguments.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Instead of generating blinding values and keys in a not-quite-uniform way
(https://github.com/ARMmbed/mbedtls/issues/4245) with copy-pasted code,
use mbedtls_mpi_random().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
dhm_make_common includes a piece of code that is identical to
dhm_random_below except for returning a different error code in one
case. Call dhm_random_below instead of repeating the code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
P-1 is as bad as 1 as a blinding value. Don't accept it.
The chance that P-1 would be randomly generated is infinitesimal, so
this is not a practical issue, but it makes the code cleaner. It was
inconsistent to accept P-1 as a blinding value but not as a private key.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Unify the common parts of mbedtls_dhm_make_params and mbedtls_dhm_make_public.
No intended behavior change, except that the exact error code may
change in some corner cases which are too exotic for the existing unit
tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Instead of generating blinding values in a not-quite-uniform way
(https://github.com/ARMmbed/mbedtls/issues/4245) with copy-pasted
code, use mbedtls_mpi_random().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Since mbedtls_mpi_random() is not specific to ECC code, move it from
the ECP module to the bignum module.
This increases the code size in builds without short Weierstrass
curves (including builds without ECC at all) that do not optimize out
unused functions.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rename mbedtls_ecp_gen_privkey_sw to mbedtls_mpi_random since it has
no particular connection to elliptic curves beyond the fact that its
operation is defined by the deterministic ECDSA specification. This is
a generic function that generates a random MPI between 1 inclusive and
N exclusive.
Slightly generalize the function to accept a different lower bound,
which adds a negligible amount of complexity.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_ecp_gen_privkey_mx generates a random number with a certain
top bit set. Depending on the size, it would either generate a number
with that top bit being random, then forcibly set the top bit to
1 (when high_bit is not a multiple of 8); or generate a number with
that top bit being 0, then set the top bit to 1 (when high_bit is a
multiple of 8). Change it to always generate the top bit randomly
first.
This doesn't make any difference in practice: the probability
distribution is the same either way, and no supported or plausible
curve has a size of the form 8n+1 anyway. But it slightly simplifies
reasoning about the behavior of this function.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't calculate the bit-size of the initially generated random number.
This is not necessary to reach the desired distribution of private
keys, and creates a (tiny) side channel opportunity.
This changes the way the result is derived from the random number, but
does not affect the resulting distribution.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The library rejected an RNG input of all-bits-zero, which led to the
key 2^{254} (for Curve25519) having a 31/32 chance of being generated
compared to other keys. This had no practical impact because the
probability of non-compliance was 2^{-256}, but needlessly
complicated the code.
The exception was added in 98e28a74e3 to
avoid the case where b - 1 wraps because b is 0. Instead, change the
comparison code to avoid calculating b - 1.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
For Montgomery keys, n_bits is actually the position of the highest
bit and not the number of bits, which would be 1 more (fence vs
posts). Rename the variable accordingly to lessen the confusion.
No semantic change.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Put the Montgomery and short Weierstrass implementations of
mbedtls_ecp_gen_privkey into their own function which can be tested
independently, but will not be part of the public ABI/API.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Prepare to isolate the Montgomery and short Weierstrass
implementations of mbedtls_ecp_gen_privkey into their own function.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When mbedtls_nist_kw_wrap was called with output=NULL and out_size=0, it
performed arithmetic on the null pointer before detecting that the output
buffer is too small and returning an error code. This was unlikely to have
consequences on real-world hardware today, but it is undefined behavior and
UBSan with Clang 10 flagged it. So fix it (fix#4025).
Fix a similar-looking pattern in unwrap, though I haven't verified that it's
reachable there.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
MBEDTLS_ECP_FIXED_POINT_OPTIM aims to speed up ecc multiplication performance.
We compute the comb table in runtime now. It is a costly operation.
This patch add a pre-computed table to initialize well-known curves. It speed up ECDSA signature verify process in runtime by using more ROM size.
Signed-off-by: kXuan <kxuanobj@gmail.com>
The implementation documentation of
```
mbedtls_ssl_tls1_3_derive_early_secrets()
```
mentioned the PSK binder key, which is misleading because the
function doesn't actually calculate it.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
This commit adds helper functions to ssl_tls13_keys.[ch]
allowing to derive the secrets specific to each stage of
a TLS 1.3 handshake (early, handshake, application) from
the corresponding master secret (early secret, handshake
secret, master secret).
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
This commit makes the API
- mbedtls_ssl_get_output_max_frag_len()
- mbedtls_ssl_get_input_max_frag_len()
- mbedtls_ssl_get__max_frag_len()
for querying the state of the Maximum Fragment Length
extension internal.
Rationale: The value those APIs provide to the user is in
upper bounds for the size of incoming and outgoing records,
which can be used to size application data buffers apporpriately
before passing them to mbedtls_ssl_{read,write}(). However,
there are other factors which influence such upper bounds,
such as the MTU or other extensions (specifically, the
record_size_limit extension which is still to be implemented)
which should be taken into account.
There should be more general APIs for querying the maximum
size of incoming and outgoing records.
For the maximum size of outgoing records, we already have such,
namely mbedtls_ssl_get_max_out_record_payload().
For the maximum size of incoming records, a new API will be
added in a subsequent commit.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Public structs members are considered private and should not
be used by users application.
MBEDTLS_PRIVATE(member) macro is intended to clearly indicate
which members are private.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Some padding checks in rsa.c were
erroneously removed in a previous
commit and are restored in this
commit.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Add comment to the effect that we cannot really check nonce size as the
GCM spec allows almost arbitrarily large nonces. As a result of this,
change the operation nonce over to an allocated buffer to avoid overflow
situations.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
On space-constrained platforms, it is a useful configuration to be able
to import/export and perform RSA key pair operations, but to exclude RSA
key generation, potentially saving flash space. It is not possible to
express this with the PSA_WANT_ configuration system at the present
time. However, in previous versions of Mbed TLS (v2.24.0 and earlier) it
was possible to configure a software PSA implementation which was
capable of making RSA signatures but not capable of generating RSA keys.
To do this, one unset MBEDTLS_GENPRIME.
Since the addition of MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR, this
expressivity was lost. Expressing that you wanted to work with RSA key
pairs forced you to include the ability to generate key pairs as well.
Change psa_crypto_rsa.c to only call mbedtls_rsa_gen_key() if
MBEDTLS_GENPRIME is also set. This restores the configuration behavior
present in Mbed TLS v2.24.0 and earlier versions.
It left as a future exercise to add the ability to PSA to be able to
express a desire for a software or accelerator configuration that
includes RSA key pair operations, like signature, but excludes key pair
generation.
Without this change, linker errors will occur when attempts to call,
which doesn't exist when MBEDTLS_GENPRIME is unset.
psa_crypto_rsa.c.obj: in function `rsa_generate_key':
psa_crypto_rsa.c:320: undefined reference to `mbedtls_rsa_gen_key'
Fixes#4512
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
Conflicts:
library/version_features.c
programs/test/query_config.c
Files were removed in development branch and modified by current branch.
Conflicts fixes by removing them.
Don't regenerate configuration-independent files when config.h or
crypto_config.h changes. These files only depend on the set of symbols
present in the headers and not on which symbols are enabled. To avoid
rebuilding the generated files whenever the configuration changes,
don't declare the configuration as a dependency.
In the rare event that a maintainer makes an edit to *config.h that
affects the generated files, they'll have to remove the generated files.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit removes the RSA
constants MBEDTLS_RSA_PUBLIC
and MBEDTLS_RSA_PRIVATE because
they are now superfluous given
that the mode parameter has been
removed.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes the mode parameter
from the mbedtls_rsa_rsassa_pss_verify_ext
function. This change is propagated
throughout the codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes the f_rng parameter from
the mbedtls_rsa_rsassa_pss_verify_ext
function. This is in preparation for
the removal of the mode parameter.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes p_rng parameter from the
mbedtls_rsa_rsassa_pss_verify_ext function
in preparation for removal of the mode
parameter.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes the mode parameter
from the mbedtls_rsa_rsassa_pss_verify
function and propagates the change
throughout the process.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes f_rng parameter from
mbedtls_rsa_rsassa_pss_verify function in
preparation of mode parameter removal.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes p_rng parameter from
mbedtls_rsa_rsassa_pss_verify function
as preparation for removing the mode
parameter.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes mode parameter from
mbedtls_rsa_rsassa_pkcs1_v15_verify and
propagates the change throughout the
codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit performs removal of f_rng parameter
from mbedtls_rsa_rsassa_pkcs1_v15_verify
function in preparation for removal of mode
parameter.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes p_rng from
mbedtls_rsa_rsassa_pkcs1_v15_verify function in
preparation of removal of mode parameter.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Conflicts:
* configs/config-psa-crypto.h: modified here, removed in development
* tests/suites/test_suite_x509parse.data: all conflicts are in depends_on
lines where development made a change unrelated to MBEDTLS_SHAxxx and our
branch either changed `MBEDTLS_SHA256_C` to `MBEDTLS_SHA224_C` or
`MBEDTLS_SHA512_C:!MBEDTLS_SHA512_NO_SHA384` to ``MBEDTLS_SHA384_C`, with
no change to what the test does. Pick the other branch's dependency
changes then apply our SHA dpeendency change.
The sequence of calls starts-update-starts-update-finish is not a
guaranteed valid way to abort an operation and start a new one. Our
software implementation just happens to support it, but alt
implementations may very well not support it.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
To simplify the documentation, and because there are only two realistic
behaviors in practice, only allow two behaviors for multipart output:
immediate output, or buffering of the last partial block.
State some simple rules that applications can follow if they don't care about
the details.
Explicitly state how much output is needed for finish(). Only require the
buffer size to be the size of the actual output, not the size of the potential
output in the worst case. Rename the parameter from output_len to output_size
since it's a buffer size and not necessarily the length of the data.
No longer guarantee that the built-in implementation produces immediate
output.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Commit removes mode parameter from
mbedtls_rsa_pkcs1_verify and propagates the
change throughout the codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes p_rng from mbedtls_rsa_pkcs1_verify
since p_rng has no relevance following the removal
of f_rng from this function.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes f_rng parameter from
mbedtls_rsa_pkcs1_verify as a prerequisite
to removing the mode parameter. f_rng no
longer has relevance in this function if
mode is removed.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes the mode param from
mbedtls_rsa_rsassa_pss_sign and propagates
the changes throughout the codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes the mode parameter from
mbedtls_rsa_rsassa_pkcs1_v15_sign and
propagates the change throughout the
codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes the mode parameter from
mbedtls_rsa_pkcs1_sign and progagates the
change to all relevant parts of the codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
This commit modifies the typedef of
mbedtls_pk_rsa_alt_sign_func and propagates the
associated changes throughout the codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Run `make generated_files` to generate the automatically generated
C source files and build scripts.
Run `make neat` to remove all automatically generated files, even C
source files and build scripts.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Removes mode parameter from
mbedtls_rsa_rsaes_oaep_encrypt and propagates
changes throughout the codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Removal of mode parameter from
mbedtls_rsa_rsaes_pkcs1_v15_encrypt. This commit
propagates the change to all relevant function calls
and tests.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Removal of the mode parameter from
mbedtls_rsa_pkcs1_encrypt function. This change
is propagated throughout the codebase and to
relevant tests.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Calls to abort that are now being done by the psa_crypto layer, freeing
of tempory allocations (done by abort) and a couple of checks that had
already been done prior to that point
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Ad and body lengths can only be too big on builds where size_t is bigger
than 32 bits. This checking code therefore generates always true
comparison warnings on 32 bit platforms, and thus had to be guarded.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Split to data required for internal implementation and data required for
driver implementation with data left over for the PSA layer.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Add (internal only) define to config.h which allows the temporary
implementation of CCM to work, by removing the buffer zeroization on tag
fail when decrypting. This will obviously be removed when multipart CCM
is properaly implemented
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Remove spurious "not supported" returns, and fix same issue that was
encountered with internal implementations - operation needs to be
marked as a type even if the initial call fails, otherwise cleanup won't
get done.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Although this deviates from the standard "auto-generated" code, the
M-AEAD setup functions set the key and thus allocate memory. If the
failure occurs after this (invalid tag size for example) then not having
the id set to the internal drivers means that abort does not get called,
and this causes the allocated data to leak.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Move CCM to update all data at update step, as final step can only
output at most a block length, so outputting all data at this step
significantly breaks the tests. Had to add unpleasant workaround for the
validate stage, but this is the only way I can do things without
breaking CCM Alt implementations.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Fix memory leak due to aead_abort() using incorrect enums to identify
algorithm used. Fix incorrect return on failure to check tag on
aead_verify()
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
For the time being CCM and GCM are not entirely implemented correctly
due to issues with their underlying implentations, which would be
difficult to fix in 2.x, and thus require all the AD and data to be
passed in in one go.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Multipart AEAD operation struct has to be public as it's allocated by
the caller, so to save duplication of code, switch oneshot AEAD over to
using the multipart operation struct.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
mbedtls_ssl_{get,set}_session() exhibited idempotent behaviour
in Mbed TLS 2.x. Multiple calls to those functions are not useful
in TLS 1.2, and the idempotent nature is unsuitable for support of
TLS 1.3 which introduces the availabilty to offer multiple tickets
for resumption, as well as receive multiple tickets.
In preparation for TLS 1.3 support, this commit relaxes the semantics
of `mbedtls_ssl_{get,set}_session()` by allowing implementations to
fail gracefully, and leveraging this freedom by modifying the
existing TLS 1.2 implementation to only accept one call to
`mbedtls_ssl_{get,set}_session()` per context, and non-fatally
failing all subsequent invocations.
For TLS 1.3, it will be leveraged by making multiple calls to
`mbedtls_ssl_get_session()` issue one ticket a time until no more
tickets are available, and by using multiple calls to
`mbedtls_ssl_set_session()` to allow the client to offer multiple
tickets to the server.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The changed logic is to try a sign-message driver (opaque or transparent);
if there isn't one, fallback to builtin sofware and do the hashing,
then try a sign-hash driver. This will enable to the opaque driver
to fallback to software.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
To avoid code duplication of the old-style SE interface usage
call psa_driver_wrapper_sign/verify_hash function instead of
the direct internal functions.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Use common funtion for psa_sign_hash and psa_sign_message and one for
psa_verify_hash and psa_verify_message to unify them.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
The reference session cache implementation may end up storing multiple
sessions associated to the same session ID if the set()-call for the
second session finds an outdated cache entry prior to noticing the entry
with the matching session ID. While this logically overwrites the existing
entry since we always search the cache in order, this is at least a waste
of resources.
This commit fixes this by always checking first whether the given ID is
already present in the cache.
It also restructures the code for easier readability.
Fixes#4509.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The output parameter of mbedtls_sha256_finish_ret and mbedtls_sha256_ret
now has a pointer type rather than array type. This removes spurious
warnings in some compilers when outputting a SHA-224 hash into a
28-byte buffer.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove a kludge to avoid a warning in GCC 11 when calling
mbedtls_sha512_finish_ret with a 48-byte output buffer. This is correct
since we're calculating SHA-384. When mbedtls_sha512_finish_ret's output
parameter was declared as a 64-byte array, GCC 11 -Wstringop-overflow
emitted a well-meaning, but inaccurate buffer overflow warning, which we
tried to work around (successfully with beta releases but unsuccessfully
with GCC 11.1.0 as released). Now that the output parameter is declared as a
pointer, no workaround is necessary.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The output parameter of mbedtls_sha512_finish_ret and mbedtls_sha512_ret
now has a pointer type rather than array type. This removes spurious
warnings in some compilers when outputting a SHA-384 hash into a
48-byte buffer.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove mode param from mbedtls_rsa_rsaes_pkcs1_v15_decrypt
and also modify and remove relevant tests.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Removing the mode parameter from the mbedtls_rsa_rsaes_oaep_decrypt
function. The change is progagated to all function calls, including in
test suite .function files. Additionally fully removing one test
where the wrong mode was being tested.
Signed-off-by: Tom Daubney <Thomas.Daubney@arm.com>
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
The mode parameter has been removed from the
mbedtls_rsa_pkcs1_decrypt function. The change
has been progagated to all function calls,
including in test suite .function files.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Removed a conditional compilation block
relating to MBEDTLS_PKCS1_V15 in
rsa_pkcs1_verify_raw function that was no
longer relevant.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Building the library without entropy sources negates any and all security
provided by the library.
This option was originally requested a relatively long time ago and it
does not provide any tangible benefit for users any more.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Sometime user may forget to call mbedtls_aes_setkey_enc or
mbedtls_aes_setkey_dec before mbedtls_aes_crypt_ecb and then
the code normally crash inside the assembly code. With this
patch, the code will stop inside the C source code which is
more convenient to locate the problem.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I0e1d6b219f8709f8acaee5f345344335fc82fed3
Since they became equivalent after moving the is_sign checking back to
the PSA core, they're now redundant, and the generic mac_setup function
can just be called directly.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Since a valid mac operation context would guarantee that the stored
mac size is >= 4, it wasn't immediately obvious that the zero-length
check is meant for static analyzers and a bit of robustness.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Rework SHA224 and SHA283 documentation.
Define MBEDTLS_SHAxxx_C options in alphabetic order.
Fix SHA224 and SHA384 dependencies in test suites.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
The PSA core checks the key type and algorithm combination before
calling the driver, so the driver doesn't have to do this once more.
The PSA core will also not start an operation with a requested length
which is larger than the full MAC output size, so the output length check
in the driver isn't needed as long as the driver returns an error on
mac_setup if it doesn't support the underlying hash algorithm.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
It makes sense to do the length checking in the core rather than expect
each driver to deal with it themselves. This puts the onus on the core to
dictate which algorithm/key combinations are valid before calling a driver.
Additionally, this commit also updates the psa_mac_sign_finish function
to better deal with output buffer sanitation, as per the review comments
on #4247.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
As psa_mac_sign_finish / psa_mac_verify_finish already checks that the
operation structure is valid (id is non-zero), the driver itself doesn't
have to check for that anymore. If the operation has a driver ID assigned,
it means that driver has returned success from its setup function, so the
algorithm value will be set correctly.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
The key passed to the driver has been imported by the PSA Core, meaning
its length has already been verified, and the driver can rely on the
buffer length and key attributes being consistent.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
This means there is no longer a need to have an internal HMAC API, so
it is being removed in this commit as well.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Prefix with 'mbedtls_psa' as per the other types which implement some
sort of algorithm in software.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Now renamed to mbedtls_psa_safer_memcmp, it provides a single location
for buffer comparison.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
The purpose of key_set was to guard the operation structure from being
used for update/finish before a key was set. Now that the implementation
fully adheres to the PSA API, that function is covered by the `alg`
variable instead. It's set to the algorithm in use when a key is set, and
is zero when the operation is reset/invalid.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
* Early return since there's nothing to clean up
* Get rid of unnecessary local variable
* Check algorithm validity for MAC in the PSA core instead of in the driver
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Apparently it was at some point assumed that there would be
support for MAC algorithms with IV, but that hasn't been
implemented yet. Until that time, these context structure
members are superfluous and can be removed.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Typedef'ed structures are suffixed _t
Also updated the initialiser macro with content that actually
matches the structure's content.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Since HMAC moved into its own compilation unit, the internal API needed
to be documented and finalized. This means no more reaching deep into
the operation structure from within the PSA Crypto core. This will make
future refactoring work easier, since internal HMAC is now opaque to the
core.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Step 3/x in moving the driver. Separate commits should make for easier
review.
Additional changes on top of code movement:
* Copied the implementation of safer_memcmp from psa_crypto into
psa_cipher_mac since the mac_verify driver implementation
depends on it, and it isn't available through external linkage
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Step 2/x in moving the driver. Separate commits should make for easier
review.
Additional changes on top of code movement:
* Early-return success on input with zero-length to mac_update, to
avoid NULL pointers getting passed into the driver dispatch
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Step 1/x in moving the driver. Separate commits should make for easier
review.
Additional changes on top of just moving code:
* Added a sanity check on the key buffer size for CMAC.
* Transfered responsibility for resetting the core members of the
PSA MAC operation structure back to the core (from the driver
wrapper layer)
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
This is a temporary measure. Other operations in the PSA Core which rely
on this internal HMAC API should be rewritten to use the MAC API instead,
since they can then leverage accelerated HMAC should a platform provide
such acceleration support.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Zephyr's native posix port define _POSIX_C_SOURCE with a higher value
during the build, so when mbedTLS defines it with a different value
breaks the build.
As Zephyr is already defining a higher value is guaranteed that mbedTLS
required features will be available. So, just define it in case it was
not defined before.
[taken from Zephyr mbedtls module:
76dcd6eeca]
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Signed-off-by: David Brown <david.brown@linaro.org>
Move the key buffer size calculation code under
tests to avoid check-names.sh to complain about
"likely macros with typos".
This removes the calculation of key buffer
sizes for the test driver from the wrapper based on
static size data. But the code is still there in test
code to be used when we go back to work on the
generation of the driver wrapper.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Handling the receipt of a handshake record after the initial handshake
requires non-trivial logic depending on the protocol version and the
endpoint. This logic is currently embedded in mbedtls_ssl_read().
With the introduction of support for [D]TLS 1.3, the logic will become
even more complex, since [D]TLS 1.3 drops support for renegotiation --
which in [D]TLS 1.2 is the main purpose of post-handshake handshake
messages -- but instead introduces numerous other post-handshake
handshake messages.
In order to pave the way for those changes, this commit improves
readability and maintainability of mbedtls_ssl_read() by moving
the TLS <=1.2 logic for handling post-handshake handshake messages
into a separate helper function ssl_handle_hs_message_post_handshake().
The logic of the code is entirely unchanged.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The server-side `Certificate` handshake message writer checks
whether a certificate is present, and if not fails with:
```
MBEDTLS_ERR_SSL_CERTIFICATE_REQUIRED
```
This should never happen, since the library checks the presence
of a suitable certificate before picking a ciphersuite. It is
therefore more suitable to convert this check into an assertion,
and fail with MBEDTLS_ERR_SSL_INTERNAL_ERROR upon failure.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
This commit removes the unused error code
```
MBEDTLS_ERR_SSL_INVALID_VERIFY_HASH
```
from the public API for Mbed TLS 3.0.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The error code MBEDTLS_ERR_SSL_INVALID_VERIFY_HASH is only
returned from the internal function
```
mbedtls_ssl_set_calc_verify_md()
```
Moreover, at every call-site of this function, it is only
checked whether the return value is 0 or not, while the
exact return value is irrelevant.
The behavior the library is therefore unchanged if we return 1
instead of MBEDTLS_ERR_SSL_INVALID_VERIFY_HASH in
`mbedtls_ssl_set_calc_verify_md()`. This commit makes this change.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
This error is used when the output buffer isn't large enough
to hold our own certificate.
In the interest of cleaning up the error space for 3.0, this commit
removes MBEDTLS_ERR_SSL_CERTIFICATE_TOO_LARGE and replaces its single
use by MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The SSL error code MBEDTLS_ERR_SSL_PEER_VERIFY_FAILED is unused.
Remove it for Mbed TLS 3.0.
The code being unused comes as a surprise, at is seems to be
reasonable to report it to the user upon peer CRT verification
failure. However, this study (can potentially re-introduction
of the code) can be left for 3.x, while the error code removal
can only happen in 3.0.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The SSL error code MBEDTLS_ERR_SSL_UNKNOWN_CIPHER is unused.
Remove it for Mbed TLS 3.0 and leave a comment indicating the
gap in the error code space it creates.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
pk_get_pk_alg will either return 0 or a pk error code. This means that
the error code will always be a high level module ID and so we just
return ret.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Although SHA512 is currently required to enable SHA384, this
is expected to change in the future. This commit is an
intermediate step towards fully separating SHA384 and SHA512.
check_config is the only module which enforces that SHA512 is
enabled together with SHA384.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
The new compile-time option MBEDTLS_X509_REMOVE_INFO removes various
X.509 debugging strings and functionality, including
```
mbedtls_x509_crt_verify_info()
```
which ssl_client2.c and ssl_server2.c use to print human readable
descriptions of X.509 verification failure conditions. Those
conditions are also grepped for in numerous ssl-opt.sh tests.
Instead of disabling those tests if MBEDTLS_X509_REMOVE_INFO is set,
this commit essentially moves mbedtls_x509_crt_verify_info() to
ssl_client2.c and ssl_server2.c. However, instead of just copy-pasting
the code from x509_crt.c, the following approach is used:
A macro MBEDTLS_X509_CRT_ERROR_INFO_LIST is introduced which for each
verification failure condition invokes a user-defined macro X509_CRT_ERROR_INFO
with (a) the numerical error code, (b) the string presentation of the
corresponding error macro, (c) the info string for the error condition.
This macro can thus be used to generate code which somehow iterates over
the verifiation failure conditions, but the list of error conditions and
information strings is nowhere duplicated.
This is then used to re-implement mbedtls_x509_crt_verify_info() in
x509_crt.c and to provide a functionally equivalent (yet slightly different)
version in ssl_client2.c and ssl_server2.c in case MBEDTLS_X509_REMOVE_INFO
is set.
This way, little changes to ssl-opt.sh will be necessary in case
MBEDTLS_X509_REMOVE_INFO is set because the info strings for the
verification failure conditions will be printed regardless of whether
MBEDTLS_X509_REMOVE_INFO is set or not.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The introduction of positive options to control the presence
of pre-existing functionality breaks the build for users of
handwritten configurations.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Introduce MBEDTLS_X509_INFO to indicate the availability of the
mbedtls_x509_*_info() function and closely related APIs. When this is
not defined, also omit name and description from
mbedtls_oid_descriptor_t, and omit OID arrays, macros, and types that
are entirely unused. This saves several KB of code space.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Add implementation for MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS
Merging as it has been ready for four days now and I prefer not having to go through other rebases especially given the coming change of scope of development (3.0 rather than 2.2x).
Improve comments explaining error code checking, fix incorrect comments
and make a small formatting fix.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
* group setting of attributes before calling get_builtin_key
* return early instead of going to exit when no resources are allocated yet
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
The GCM interface now has separate functions to start the operation
and to pass the associated data.
This is in preparation for allowing the associated data to be passed
in chunks with repeatated calls to mbedtls_gcm_update_ad().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Alternative implementations of GCM may delay the output of partial
blocks from mbedtls_gcm_update(). Add an output length parameter to
mbedtls_gcm_update() to allow such implementations to delay the output
of partial blocks. With the software implementation, there is no such
delay.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Alternative implementations of GCM may delay the output of partial
blocks from mbedtls_gcm_update(). Add an output parameter to
mbedtls_gcm_finish() to allow such implementations to pass the final
partial block back to the caller. With the software implementation,
this final output is always empty.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_gcm_update now accepts inputs of arbitrary size. There is no
longer a requirement that all calls except the last one pass a
multiple of 16 bytes.
This commit updates the library code and adjusts the GCM tests to
exercise arbitrarily aligned input sizes.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Leverage the fact that the get_builtin_key entrypoint returns a key's
attributes, such that a proper size for the builtin key's buffer can
be calculated through the driver's get_key_buffer_size hook.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Since the loading attempt of a builtin key might be followed by trying
to load a persistent key, we can only wipe the allocated key data, not
the associated metadata.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
The macro always meant 'location', but was mistakenly named 'lifetime'.
Naming it location instead makes much more sense, and drives home the
conceptual differences between location and lifetime values.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Instead of the full attributes struct, it now only takes/returns what it
actually needs to.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Builtin key support for the test driver is always compiled in, and no
longer guarded by MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS.
Parsing the key slot from the buffer by cast and assign instead of memcmp.
For exporting keys, the test driver no longer reaches into the key
identifier in order to check whether a key is builtin, but rather
assumes so based on the key buffer length. It's the driver's
responsibility to be able to detect the key material it returned as part
of the get_builtin_key operation.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
As part of test_psa_crypto_drivers, define a builtin symmetric
plus an ECC key on the test driver lifetime.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
According to the design in psa-driver-interface.md. Compiles without
issue in test_psa_crypto_drivers.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
