Conflicts:
include/mbedtls/ssl.h
include/psa/crypto_struct.h
Conflicts fixed by using the code from development branch
and manually re-applying the MBEDTLS_PRIVATE wrapping.
Unrelated to RSA (only used in ECP), but while improving one
mbedtls_safe_cond_xxx function, let's improve the other as well.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
mbedtls_mpi_cf_bool_eq() is a verbatim copy of mbedtls_ssl_cf_bool_eq()
Deduplication will be part of a future task.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Remove padding parameters as mbedtls_rsa_init()
cannot return an error code when padding
parameters are invalid.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
mbedtls_rsa_set_padding() now returns the error
code MBEDTLS_ERR_RSA_INVALID_PADDING when
padding parameters are invalid.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This change enables automatic detection and consumption of Mbed TLS
library targets from within other CMake projects. By generating an
`MbedTLSConfig.cmake` file, consuming projects receive a more complete
view of these targets, allowing them to be used as dependencies which
properly inherit the transitive dependencies of the libraries.
This is fairly fragile, as it seems Mbed TLS's libraries do not appear
to properly model their dependencies on other targets, including
third-party dependencies. It is, however, sufficient for building and
linking the compiled Mbed TLS libraries when there are no third-party
dependencies involved. Further work is needed for more complex
use-cases, but this will likely meet the needs of most projects.
Resolves#298. Probably useful for #2857.
Signed-off-by: Chris Kay <chris.kay@arm.com>
Calling mbedtls_mpi_cmp_int reveals the number of leading zero limbs
to an adversary who is capable of very fine-grained timing
measurements. This is very little information, but could be practical
with secp521r1 (1/512 chance of the leading limb being 0) if the
adversary can measure the precise timing of a large number of
signature operations.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
ssl_server2 had a check that we never try to use a minor version lower
than 2 with DTLS, but that check is no longer needed, as there's no way
that would happen now that MBEDTLS_SSL_MINOR_VERSION_1 is no longer
public.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This commit removes the API
```
mbedtls_ssl_conf_ciphersuites_for_version()
```
which allows to configure lists of acceptable ciphersuites
for each supported version of SSL/TLS: SSL3, TLS 1.{0,1,2}.
With Mbed TLS 3.0, support for SSL3, TLS 1.0 and TLS 1.1
is dropped. Moreover, upcoming TLS 1.3 support has a different
notion of cipher suite and will require a different API.
This means that it's only for TLS 1.2 that we require
a ciphersuite configuration API, and
```
mbedtls_ssl_conf_ciphersuites()
```
can be used for that. The version-specific ciphersuite
configuration API `mbedtls_ssl_conf_ciphersuites_for_version()`,
in turn, is no longer needed.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The idiom "resize an mpi to a given size" appeared 4 times. Unify it
in a single function. Guarantee that the value is set to 0, which is
required by some of the callers and not a significant expense where
not required.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Since the internal function mpi_fill_random_internal() assumes that X
has the right size, there is no need to call grow().
To further simplify the function, set the sign outside, and zero out
the non-randomized part directly.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In real life, min << N and the probability that mbedtls_mpi_random()
fails to find a suitable value after 30 iterations is less than one in
a billion. But at least for testing purposes, it's useful to not
outright reject "silly" small values of N, and for such values, 30
iterations is not enough to have a good probability of success.
Pick 250 iterations, which is enough for cases like (min=3, N=4), but
not for cases like (min=255, N=256).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This comment is no longer in the specific context of generating a
random point on an elliptic curve.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_mpi_random() uses mbedtls_mpi_cmp_mpi_ct(), which requires its
two arguments to have the same storage size. This was not the case
when the upper bound passed to mbedtls_mpi_random() had leading zero
limbs.
Fix this by forcing the result MPI to the desired size. Since this is
not what mbedtls_mpi_fill_random() does, don't call it from
mbedtls_mpi_random(), but instead call a new auxiliary function.
Add tests to cover this and other conditions with varying sizes for
the two arguments.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Instead of generating blinding values and keys in a not-quite-uniform way
(https://github.com/ARMmbed/mbedtls/issues/4245) with copy-pasted code,
use mbedtls_mpi_random().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
dhm_make_common includes a piece of code that is identical to
dhm_random_below except for returning a different error code in one
case. Call dhm_random_below instead of repeating the code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
P-1 is as bad as 1 as a blinding value. Don't accept it.
The chance that P-1 would be randomly generated is infinitesimal, so
this is not a practical issue, but it makes the code cleaner. It was
inconsistent to accept P-1 as a blinding value but not as a private key.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Unify the common parts of mbedtls_dhm_make_params and mbedtls_dhm_make_public.
No intended behavior change, except that the exact error code may
change in some corner cases which are too exotic for the existing unit
tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Instead of generating blinding values in a not-quite-uniform way
(https://github.com/ARMmbed/mbedtls/issues/4245) with copy-pasted
code, use mbedtls_mpi_random().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Since mbedtls_mpi_random() is not specific to ECC code, move it from
the ECP module to the bignum module.
This increases the code size in builds without short Weierstrass
curves (including builds without ECC at all) that do not optimize out
unused functions.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rename mbedtls_ecp_gen_privkey_sw to mbedtls_mpi_random since it has
no particular connection to elliptic curves beyond the fact that its
operation is defined by the deterministic ECDSA specification. This is
a generic function that generates a random MPI between 1 inclusive and
N exclusive.
Slightly generalize the function to accept a different lower bound,
which adds a negligible amount of complexity.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_ecp_gen_privkey_mx generates a random number with a certain
top bit set. Depending on the size, it would either generate a number
with that top bit being random, then forcibly set the top bit to
1 (when high_bit is not a multiple of 8); or generate a number with
that top bit being 0, then set the top bit to 1 (when high_bit is a
multiple of 8). Change it to always generate the top bit randomly
first.
This doesn't make any difference in practice: the probability
distribution is the same either way, and no supported or plausible
curve has a size of the form 8n+1 anyway. But it slightly simplifies
reasoning about the behavior of this function.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't calculate the bit-size of the initially generated random number.
This is not necessary to reach the desired distribution of private
keys, and creates a (tiny) side channel opportunity.
This changes the way the result is derived from the random number, but
does not affect the resulting distribution.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The library rejected an RNG input of all-bits-zero, which led to the
key 2^{254} (for Curve25519) having a 31/32 chance of being generated
compared to other keys. This had no practical impact because the
probability of non-compliance was 2^{-256}, but needlessly
complicated the code.
The exception was added in 98e28a74e3 to
avoid the case where b - 1 wraps because b is 0. Instead, change the
comparison code to avoid calculating b - 1.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
For Montgomery keys, n_bits is actually the position of the highest
bit and not the number of bits, which would be 1 more (fence vs
posts). Rename the variable accordingly to lessen the confusion.
No semantic change.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Put the Montgomery and short Weierstrass implementations of
mbedtls_ecp_gen_privkey into their own function which can be tested
independently, but will not be part of the public ABI/API.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Prepare to isolate the Montgomery and short Weierstrass
implementations of mbedtls_ecp_gen_privkey into their own function.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When mbedtls_nist_kw_wrap was called with output=NULL and out_size=0, it
performed arithmetic on the null pointer before detecting that the output
buffer is too small and returning an error code. This was unlikely to have
consequences on real-world hardware today, but it is undefined behavior and
UBSan with Clang 10 flagged it. So fix it (fix#4025).
Fix a similar-looking pattern in unwrap, though I haven't verified that it's
reachable there.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
MBEDTLS_ECP_FIXED_POINT_OPTIM aims to speed up ecc multiplication performance.
We compute the comb table in runtime now. It is a costly operation.
This patch add a pre-computed table to initialize well-known curves. It speed up ECDSA signature verify process in runtime by using more ROM size.
Signed-off-by: kXuan <kxuanobj@gmail.com>
The implementation documentation of
```
mbedtls_ssl_tls1_3_derive_early_secrets()
```
mentioned the PSK binder key, which is misleading because the
function doesn't actually calculate it.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
This commit adds helper functions to ssl_tls13_keys.[ch]
allowing to derive the secrets specific to each stage of
a TLS 1.3 handshake (early, handshake, application) from
the corresponding master secret (early secret, handshake
secret, master secret).
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
This commit makes the API
- mbedtls_ssl_get_output_max_frag_len()
- mbedtls_ssl_get_input_max_frag_len()
- mbedtls_ssl_get__max_frag_len()
for querying the state of the Maximum Fragment Length
extension internal.
Rationale: The value those APIs provide to the user is in
upper bounds for the size of incoming and outgoing records,
which can be used to size application data buffers apporpriately
before passing them to mbedtls_ssl_{read,write}(). However,
there are other factors which influence such upper bounds,
such as the MTU or other extensions (specifically, the
record_size_limit extension which is still to be implemented)
which should be taken into account.
There should be more general APIs for querying the maximum
size of incoming and outgoing records.
For the maximum size of outgoing records, we already have such,
namely mbedtls_ssl_get_max_out_record_payload().
For the maximum size of incoming records, a new API will be
added in a subsequent commit.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Public structs members are considered private and should not
be used by users application.
MBEDTLS_PRIVATE(member) macro is intended to clearly indicate
which members are private.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Some padding checks in rsa.c were
erroneously removed in a previous
commit and are restored in this
commit.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
On space-constrained platforms, it is a useful configuration to be able
to import/export and perform RSA key pair operations, but to exclude RSA
key generation, potentially saving flash space. It is not possible to
express this with the PSA_WANT_ configuration system at the present
time. However, in previous versions of Mbed TLS (v2.24.0 and earlier) it
was possible to configure a software PSA implementation which was
capable of making RSA signatures but not capable of generating RSA keys.
To do this, one unset MBEDTLS_GENPRIME.
Since the addition of MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR, this
expressivity was lost. Expressing that you wanted to work with RSA key
pairs forced you to include the ability to generate key pairs as well.
Change psa_crypto_rsa.c to only call mbedtls_rsa_gen_key() if
MBEDTLS_GENPRIME is also set. This restores the configuration behavior
present in Mbed TLS v2.24.0 and earlier versions.
It left as a future exercise to add the ability to PSA to be able to
express a desire for a software or accelerator configuration that
includes RSA key pair operations, like signature, but excludes key pair
generation.
Without this change, linker errors will occur when attempts to call,
which doesn't exist when MBEDTLS_GENPRIME is unset.
psa_crypto_rsa.c.obj: in function `rsa_generate_key':
psa_crypto_rsa.c:320: undefined reference to `mbedtls_rsa_gen_key'
Fixes#4512
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
Conflicts:
library/version_features.c
programs/test/query_config.c
Files were removed in development branch and modified by current branch.
Conflicts fixes by removing them.
Don't regenerate configuration-independent files when config.h or
crypto_config.h changes. These files only depend on the set of symbols
present in the headers and not on which symbols are enabled. To avoid
rebuilding the generated files whenever the configuration changes,
don't declare the configuration as a dependency.
In the rare event that a maintainer makes an edit to *config.h that
affects the generated files, they'll have to remove the generated files.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit removes the RSA
constants MBEDTLS_RSA_PUBLIC
and MBEDTLS_RSA_PRIVATE because
they are now superfluous given
that the mode parameter has been
removed.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes the mode parameter
from the mbedtls_rsa_rsassa_pss_verify_ext
function. This change is propagated
throughout the codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes the f_rng parameter from
the mbedtls_rsa_rsassa_pss_verify_ext
function. This is in preparation for
the removal of the mode parameter.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes p_rng parameter from the
mbedtls_rsa_rsassa_pss_verify_ext function
in preparation for removal of the mode
parameter.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes the mode parameter
from the mbedtls_rsa_rsassa_pss_verify
function and propagates the change
throughout the process.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes f_rng parameter from
mbedtls_rsa_rsassa_pss_verify function in
preparation of mode parameter removal.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes p_rng parameter from
mbedtls_rsa_rsassa_pss_verify function
as preparation for removing the mode
parameter.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes mode parameter from
mbedtls_rsa_rsassa_pkcs1_v15_verify and
propagates the change throughout the
codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit performs removal of f_rng parameter
from mbedtls_rsa_rsassa_pkcs1_v15_verify
function in preparation for removal of mode
parameter.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes p_rng from
mbedtls_rsa_rsassa_pkcs1_v15_verify function in
preparation of removal of mode parameter.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Conflicts:
* configs/config-psa-crypto.h: modified here, removed in development
* tests/suites/test_suite_x509parse.data: all conflicts are in depends_on
lines where development made a change unrelated to MBEDTLS_SHAxxx and our
branch either changed `MBEDTLS_SHA256_C` to `MBEDTLS_SHA224_C` or
`MBEDTLS_SHA512_C:!MBEDTLS_SHA512_NO_SHA384` to ``MBEDTLS_SHA384_C`, with
no change to what the test does. Pick the other branch's dependency
changes then apply our SHA dpeendency change.
The sequence of calls starts-update-starts-update-finish is not a
guaranteed valid way to abort an operation and start a new one. Our
software implementation just happens to support it, but alt
implementations may very well not support it.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
To simplify the documentation, and because there are only two realistic
behaviors in practice, only allow two behaviors for multipart output:
immediate output, or buffering of the last partial block.
State some simple rules that applications can follow if they don't care about
the details.
Explicitly state how much output is needed for finish(). Only require the
buffer size to be the size of the actual output, not the size of the potential
output in the worst case. Rename the parameter from output_len to output_size
since it's a buffer size and not necessarily the length of the data.
No longer guarantee that the built-in implementation produces immediate
output.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Commit removes mode parameter from
mbedtls_rsa_pkcs1_verify and propagates the
change throughout the codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes p_rng from mbedtls_rsa_pkcs1_verify
since p_rng has no relevance following the removal
of f_rng from this function.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes f_rng parameter from
mbedtls_rsa_pkcs1_verify as a prerequisite
to removing the mode parameter. f_rng no
longer has relevance in this function if
mode is removed.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes the mode param from
mbedtls_rsa_rsassa_pss_sign and propagates
the changes throughout the codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes the mode parameter from
mbedtls_rsa_rsassa_pkcs1_v15_sign and
propagates the change throughout the
codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes the mode parameter from
mbedtls_rsa_pkcs1_sign and progagates the
change to all relevant parts of the codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
This commit modifies the typedef of
mbedtls_pk_rsa_alt_sign_func and propagates the
associated changes throughout the codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Run `make generated_files` to generate the automatically generated
C source files and build scripts.
Run `make neat` to remove all automatically generated files, even C
source files and build scripts.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Removes mode parameter from
mbedtls_rsa_rsaes_oaep_encrypt and propagates
changes throughout the codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Removal of mode parameter from
mbedtls_rsa_rsaes_pkcs1_v15_encrypt. This commit
propagates the change to all relevant function calls
and tests.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Removal of the mode parameter from
mbedtls_rsa_pkcs1_encrypt function. This change
is propagated throughout the codebase and to
relevant tests.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
mbedtls_ssl_{get,set}_session() exhibited idempotent behaviour
in Mbed TLS 2.x. Multiple calls to those functions are not useful
in TLS 1.2, and the idempotent nature is unsuitable for support of
TLS 1.3 which introduces the availabilty to offer multiple tickets
for resumption, as well as receive multiple tickets.
In preparation for TLS 1.3 support, this commit relaxes the semantics
of `mbedtls_ssl_{get,set}_session()` by allowing implementations to
fail gracefully, and leveraging this freedom by modifying the
existing TLS 1.2 implementation to only accept one call to
`mbedtls_ssl_{get,set}_session()` per context, and non-fatally
failing all subsequent invocations.
For TLS 1.3, it will be leveraged by making multiple calls to
`mbedtls_ssl_get_session()` issue one ticket a time until no more
tickets are available, and by using multiple calls to
`mbedtls_ssl_set_session()` to allow the client to offer multiple
tickets to the server.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The changed logic is to try a sign-message driver (opaque or transparent);
if there isn't one, fallback to builtin sofware and do the hashing,
then try a sign-hash driver. This will enable to the opaque driver
to fallback to software.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
To avoid code duplication of the old-style SE interface usage
call psa_driver_wrapper_sign/verify_hash function instead of
the direct internal functions.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Use common funtion for psa_sign_hash and psa_sign_message and one for
psa_verify_hash and psa_verify_message to unify them.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
The reference session cache implementation may end up storing multiple
sessions associated to the same session ID if the set()-call for the
second session finds an outdated cache entry prior to noticing the entry
with the matching session ID. While this logically overwrites the existing
entry since we always search the cache in order, this is at least a waste
of resources.
This commit fixes this by always checking first whether the given ID is
already present in the cache.
It also restructures the code for easier readability.
Fixes#4509.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The output parameter of mbedtls_sha256_finish_ret and mbedtls_sha256_ret
now has a pointer type rather than array type. This removes spurious
warnings in some compilers when outputting a SHA-224 hash into a
28-byte buffer.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove a kludge to avoid a warning in GCC 11 when calling
mbedtls_sha512_finish_ret with a 48-byte output buffer. This is correct
since we're calculating SHA-384. When mbedtls_sha512_finish_ret's output
parameter was declared as a 64-byte array, GCC 11 -Wstringop-overflow
emitted a well-meaning, but inaccurate buffer overflow warning, which we
tried to work around (successfully with beta releases but unsuccessfully
with GCC 11.1.0 as released). Now that the output parameter is declared as a
pointer, no workaround is necessary.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The output parameter of mbedtls_sha512_finish_ret and mbedtls_sha512_ret
now has a pointer type rather than array type. This removes spurious
warnings in some compilers when outputting a SHA-384 hash into a
48-byte buffer.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove mode param from mbedtls_rsa_rsaes_pkcs1_v15_decrypt
and also modify and remove relevant tests.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Removing the mode parameter from the mbedtls_rsa_rsaes_oaep_decrypt
function. The change is progagated to all function calls, including in
test suite .function files. Additionally fully removing one test
where the wrong mode was being tested.
Signed-off-by: Tom Daubney <Thomas.Daubney@arm.com>
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
The mode parameter has been removed from the
mbedtls_rsa_pkcs1_decrypt function. The change
has been progagated to all function calls,
including in test suite .function files.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Removed a conditional compilation block
relating to MBEDTLS_PKCS1_V15 in
rsa_pkcs1_verify_raw function that was no
longer relevant.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Building the library without entropy sources negates any and all security
provided by the library.
This option was originally requested a relatively long time ago and it
does not provide any tangible benefit for users any more.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Sometime user may forget to call mbedtls_aes_setkey_enc or
mbedtls_aes_setkey_dec before mbedtls_aes_crypt_ecb and then
the code normally crash inside the assembly code. With this
patch, the code will stop inside the C source code which is
more convenient to locate the problem.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I0e1d6b219f8709f8acaee5f345344335fc82fed3
Since they became equivalent after moving the is_sign checking back to
the PSA core, they're now redundant, and the generic mac_setup function
can just be called directly.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Since a valid mac operation context would guarantee that the stored
mac size is >= 4, it wasn't immediately obvious that the zero-length
check is meant for static analyzers and a bit of robustness.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Rework SHA224 and SHA283 documentation.
Define MBEDTLS_SHAxxx_C options in alphabetic order.
Fix SHA224 and SHA384 dependencies in test suites.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
The PSA core checks the key type and algorithm combination before
calling the driver, so the driver doesn't have to do this once more.
The PSA core will also not start an operation with a requested length
which is larger than the full MAC output size, so the output length check
in the driver isn't needed as long as the driver returns an error on
mac_setup if it doesn't support the underlying hash algorithm.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
It makes sense to do the length checking in the core rather than expect
each driver to deal with it themselves. This puts the onus on the core to
dictate which algorithm/key combinations are valid before calling a driver.
Additionally, this commit also updates the psa_mac_sign_finish function
to better deal with output buffer sanitation, as per the review comments
on #4247.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
As psa_mac_sign_finish / psa_mac_verify_finish already checks that the
operation structure is valid (id is non-zero), the driver itself doesn't
have to check for that anymore. If the operation has a driver ID assigned,
it means that driver has returned success from its setup function, so the
algorithm value will be set correctly.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
The key passed to the driver has been imported by the PSA Core, meaning
its length has already been verified, and the driver can rely on the
buffer length and key attributes being consistent.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
This means there is no longer a need to have an internal HMAC API, so
it is being removed in this commit as well.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Prefix with 'mbedtls_psa' as per the other types which implement some
sort of algorithm in software.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Now renamed to mbedtls_psa_safer_memcmp, it provides a single location
for buffer comparison.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
The purpose of key_set was to guard the operation structure from being
used for update/finish before a key was set. Now that the implementation
fully adheres to the PSA API, that function is covered by the `alg`
variable instead. It's set to the algorithm in use when a key is set, and
is zero when the operation is reset/invalid.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
* Early return since there's nothing to clean up
* Get rid of unnecessary local variable
* Check algorithm validity for MAC in the PSA core instead of in the driver
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Apparently it was at some point assumed that there would be
support for MAC algorithms with IV, but that hasn't been
implemented yet. Until that time, these context structure
members are superfluous and can be removed.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Typedef'ed structures are suffixed _t
Also updated the initialiser macro with content that actually
matches the structure's content.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Since HMAC moved into its own compilation unit, the internal API needed
to be documented and finalized. This means no more reaching deep into
the operation structure from within the PSA Crypto core. This will make
future refactoring work easier, since internal HMAC is now opaque to the
core.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Step 3/x in moving the driver. Separate commits should make for easier
review.
Additional changes on top of code movement:
* Copied the implementation of safer_memcmp from psa_crypto into
psa_cipher_mac since the mac_verify driver implementation
depends on it, and it isn't available through external linkage
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Step 2/x in moving the driver. Separate commits should make for easier
review.
Additional changes on top of code movement:
* Early-return success on input with zero-length to mac_update, to
avoid NULL pointers getting passed into the driver dispatch
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Step 1/x in moving the driver. Separate commits should make for easier
review.
Additional changes on top of just moving code:
* Added a sanity check on the key buffer size for CMAC.
* Transfered responsibility for resetting the core members of the
PSA MAC operation structure back to the core (from the driver
wrapper layer)
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
This is a temporary measure. Other operations in the PSA Core which rely
on this internal HMAC API should be rewritten to use the MAC API instead,
since they can then leverage accelerated HMAC should a platform provide
such acceleration support.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Zephyr's native posix port define _POSIX_C_SOURCE with a higher value
during the build, so when mbedTLS defines it with a different value
breaks the build.
As Zephyr is already defining a higher value is guaranteed that mbedTLS
required features will be available. So, just define it in case it was
not defined before.
[taken from Zephyr mbedtls module:
76dcd6eeca]
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Signed-off-by: David Brown <david.brown@linaro.org>
Move the key buffer size calculation code under
tests to avoid check-names.sh to complain about
"likely macros with typos".
This removes the calculation of key buffer
sizes for the test driver from the wrapper based on
static size data. But the code is still there in test
code to be used when we go back to work on the
generation of the driver wrapper.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Handling the receipt of a handshake record after the initial handshake
requires non-trivial logic depending on the protocol version and the
endpoint. This logic is currently embedded in mbedtls_ssl_read().
With the introduction of support for [D]TLS 1.3, the logic will become
even more complex, since [D]TLS 1.3 drops support for renegotiation --
which in [D]TLS 1.2 is the main purpose of post-handshake handshake
messages -- but instead introduces numerous other post-handshake
handshake messages.
In order to pave the way for those changes, this commit improves
readability and maintainability of mbedtls_ssl_read() by moving
the TLS <=1.2 logic for handling post-handshake handshake messages
into a separate helper function ssl_handle_hs_message_post_handshake().
The logic of the code is entirely unchanged.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
