Systematically replace "TEST_ASSERT( $x <= $y )" by "TEST_LE_U( $x, $y )" in
test_suite_psa_crypto. In this file, all occurrences of this pattern are
size_t so unsigned.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test assertions for integer comparisons that display the compared values on
failure. Similar to TEST_EQUAL.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We want to check:
1. actual output <= PSA_RAW_KEY_AGREEMENT_OUTPUT_SIZE (the output fits
if the caller uses the key-specific buffer size macro)
2. actual output <= PSA_RAW_KEY_AGREEMENT_OUTPUT_MAX_SIZE (the output fits
if the caller uses the generic buffer size macro)
3. PSA_RAW_KEY_AGREEMENT_OUTPUT_SIZE <= PSA_RAW_KEY_AGREEMENT_OUTPUT_MAX_SIZE
(consistency in the calculation)
We were only testing (1) and (2). Test (3) as well. (1) and (3) together
imply (2) so there's no need to test (2).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remaining hits seem to be hex data, certificates,
and other miscellaneous exceptions.
List generated by running codespell -w -L
keypair,Keypair,KeyPair,keyPair,ciph,nd
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Remove no_supported HMAC generate/import tests when !PSA_KEY_TYPE_HMAC as HMAC key creation works regardless of PSA_WANT_KEY_TYPE_HMAC.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
Removes a case in mbedtls_asn1_named_data() where memcpy() could be
called with a null pointer and zero length. A test case is added for
this code path, to catch the undefined behavior when running tests with
UBSan.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
Adds two comments to clarify 1) why an offset is used
in the call to psa_aead_verify() and 2) why the test of
.hits_finish is always 0 in this test case.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
For multipart encrpytion, call psa_cipher_finish(). This is not actually
necessary for non-pathological implementations of ECB (the only currently
supported IV-less cipher algorithm) because it requires the input to be a
whole number of blocks and non-pathological implementations emit the output
block from update() as soon as an input block is available. But in principle
a driver could delay output and thus require a call to finish().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Validate the size macros directly from the output length in the test data,
rather than using the value returned by the library. This is equivalent
since the value returned by the library is checked to be identical.
Enforce that SIZE() <= MAX_SIZE(), in addition to length <= SIZE(). This is
stronger than the previous code which merely enforced length <= SIZE() and
length <= MAX_SIZE().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Motivated by CVE-2022-21449, to which we're not vulnerable, but we
didn't have a test for it. Now we do.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Remove cookie support from server side
Change code to align with coding styles
Re-order functions of client_hello
Change-Id: If31509ece402f8276e6cac37f261e0b166d05e18
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
This both simplifies parsing a little, and suppresses warnings. Suppressing
warnings is both good and bad: on the one hand it resolves problems such as
https://github.com/Mbed-TLS/mbedtls/issues/5731, on the other hand it may
hide clues as to why lsof wouldn't be working as expected.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
component_test_cmake_out_of_source was running the ssl-opt.sh test case
"Fallback SCSV: beginning of list", but this test case was removed in Mbed
TLS 3.0, so ssl-opt.sh was running nothing, which is not an effective test.
In 2.x, the test case was chosen because it uses an additional auxiliary
program tests/scripts/tcp_client.pl. This auxiliary program is no longer
used. So instead, run at least one test case that's sure to exist.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We test some configurations using drivers where the driver doesn't
support certain hash algorithms, but declares that it supports
compound algorithms that use those hashes. Until this is fixed,
in those configurations, don't try to actually perform operations.
The built-in implementation of asymmetric algorithms that use a
hash internally only dispatch to the internal md module, not to
PSA. Until this is supported, don't try to actually perform
operations when the operation is built-in and the hash isn't.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
`PSA_ALG_AEAD_WITH_SHORTENED_TAG(aead_alg, len) == aead_alg` when
`len == PSA_AEAD_TAG_LENGTH(aead_alg)`. So skip this case when testing
the printing of constants.
This fixes one test case due to the way arguments of
`PSA_ALG_AEAD_WITH_SHORTENED_TAG` are enumerated (all algorithms are tested
for a value of `len` which isn't problematic, and all values of `len` are
tested for one algorithm).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
There's nothing wrong with ECC keys on Brainpool curves,
but operations with them are very slow. So we only exercise them
with a single algorithm, not with all possible hashes. We do
exercise other curves with all algorithms so test coverage is
perfectly adequate like this.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
RSA-OAEP requires the key to be larger than a function of the hash size.
Ideally such combinations would be detected as a key/algorithm
incompatibility. However key/algorithm compatibility is currently tested
between the key type and the algorithm without considering the key size, and
this is inconvenient to change. So as a workaround, dispense
OAEP-with-too-small-hash from exercising, without including it in the
automatic operation-failure test generation.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't try to use {sign,verify}_message on algorithms that only support
{sign_verify}_hash. Normally exercise_key() tries all usage that is
supported by policy, however PSA_KEY_USAGE_{SIGN,VERIFY}_MESSAGE is implied
by PSA_KEY_USAGE_{SIGN,VERIFY}_HASH so it's impossible for the test data to
omit the _MESSAGE policies with hash-only algorithms.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't re-code the logic to determine a valid nonce length.
This fixes exercise_key() for PSA_ALG_CHACHA20_POLY1305, which was trying to
use a 16-byte nonce.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Support ECB, which has no IV. The code also now supports arbitrary IV
lengths based on the algorithm and key type.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In key read tests, add usage flags that are suitable for the key type and
algorithm. This way, the call to exercise_key() in the test not only checks
that exporting the key is possible, but also that operations on the key are
possible.
This triggers a number of failures in edge cases where the generator
generates combinations that are not valid, which will be fixed in subsequent
commits.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This currently makes all the descriptions unambiguous even when truncated at
66 characters, as the unit test framework does.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The output of generate_psa_tests.py is almost unchanged: the differences are
only spaces after commas (now consistently omitted).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When generating storage format tests, pass usage flags around as a list, and
format them as the last thing.
In Storagekey(), simplify the addition of implicit usage flags: this no
longer requires parsing.
The output is unchanged.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In the generated storage format test cases, cover all supported
algorithms for each key type. This is a step towards exercising
the key with all the algorithms it supports; a subsequent commit
will generate a policy that permits the specified algorithms.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Use the new generic is_public method.
Impact on generated cases: there are new HMAC test cases for SIGN_HASH. It
was a bug that these test cases were previously not generated.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
remove use of MBEDTLS_SSL_MINOR_VERSION_*
remove use of MBEDTLS_SSL_MAJOR_VERSION_*
(only remaining use is in tests/suites/test_suite_ssl.data)
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Store the TLS version in tls_version instead of major, minor version num
Note: existing application use which accesses the struct member
(using MBEDTLS_PRIVATE) is not compatible, as the struct is now smaller.
Reduce size of mbedtls_ssl_ciphersuite_t
members are defined using integral types instead of enums in
order to pack structure and reduce memory usage by internal
ciphersuite_definitions[]
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Store the TLS version in tls_version instead of major, minor version num
Note: existing application use which accesses the struct member
(using MBEDTLS_PRIVATE) is not compatible on little-endian platforms,
but is compatible on big-endian platforms. For systems supporting
only TLSv1.2, the underlying values are the same (=> 3).
New setter functions are more type-safe,
taking argument as enum mbedtls_ssl_protocol_version:
mbedtls_ssl_conf_max_tls_version()
mbedtls_ssl_conf_min_tls_version()
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Store the TLS version instead of minor version number in tls_version.
Note: struct member size changed from unsigned char to uint16_t
Due to standard structure padding, the structure size does not change
unless alignment is 1-byte (instead of 2-byte or more)
Note: existing application use which accesses the struct member
(using MBEDTLS_PRIVATE) is compatible on little-endian platforms,
but not compatible on big-endian platforms. The enum values for
the lower byte of MBEDTLS_SSL_VERSION_TLS1_2 and of
MBEDTLS_SSL_VERSION_TLS1_3 matches MBEDTLS_SSL_MINOR_VERSION_3 and
MBEDTLS_SSL_MINOR_VERSION_4, respectively.
Note: care has been taken to preserve serialized session format,
which uses only the lower byte of the TLS version.
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
`curves.pl` (invoked by `all.sh test_depends_curves`, and
`all.sh test_depends_curves_psa`) currently runs two series of tests:
* For each curve, test with only that curve enabled.
* For each curve, test with all curves but that one.
Originally this script was introduced to validate test dependencies, and for
that all-but-one gives better results because it handles test cases that
require multiple curves. Then we extended the script to also test with a
single curve, which matches many real-world setups and catches some product
bugs. Single-curve testing also validates test dependencies in a more
limited way.
Remove all-but-one curve testing, because it doesn't add much to the test
coverage. Mainly, this means that we now won't detect if a test case
declares two curve dependencies but actually also depends on a third. This
is an acceptable loss.
The trigger for removing all-but-one curve testing is that this will make
the job take only about half as long, and the length of the job was a bit of
a problem. Resolves#5729.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
component_test_CID_no_debug was added specifically to be a non-regression
test for https://github.com/Mbed-TLS/mbedtls/issues/3998. Running compat.sh
in the newly introduced config-ccm-psk-dtls1_2.h is also a non-regression
test for that bug. Therefore component_test_CID_no_debug is redundant for
its primary purpose.
Of course every configuration is different, but the additional coverage from
component_test_CID_no_debug is minimal, unlike config-ccm-psk-dtls1_2.h
which is a plausible real-world configuration.
In mbedtls-2.28, component_test_CID_no_debug was never added, and running
the unit tests in that configuration does not trigger the #3998 bug, only
compat.sh does. So, rather than backport component_test_CID_no_debug to
2.28.2, I am removing it from 3.2.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
A concurrent branch changes the way the test cases run to no longer use
force_version=tls13, so the automatic version requirement detection will no
longer work after that branch is merged. Therefore, keep the manual
requirement (at least until automatic detection gets smarter).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When the client or server uses a specific protocol version, automatically
require that version to be enabled at compile time.
An explicit call is still needed in test cases that require a specific
protocol version (due to analyzing version-specific behavior, or checking
the version in logs), but do not force that specific protocol version, or that
force a specific version only on the openssl/gnutls side.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rename maybe_requires_ciphersuite_enabled() to detect_required_features()
and refactor its code a little. No intended behavior change. In subsequent
commits, this function will detect other requirements in a similar way.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It no longer makes sense, either in -e or -f: those ciphersuites have
been removed anyway.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
- comments about (3)DES were inconsistent (one saying "keep 3DES" and
the other "exclude it")
- we don't have any DES or 3DES ciphersuite anyway, so no need to
exclude them or comment about it
- while at it, fix comment about ARIA: it's in the default config now
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The ciphers were originally separated by the version conditions, and the spacing
was retained in case it was required later. It has been decided it would be better
to have an unbroken list in alphabetically order to quickly locate ciphers when
necessary
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Remove ciphersuites that are no longer supported.
running ./test/compat.sh -e '^$' -p mbedtls no longer skips any tests
Fixes#4818
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
As anything below (D)TLS 1.2 is no longer supported, checks for the
minor version will always be true, and have therefore been removed
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Ensure that the nominal run works properly, so that it's apparent that the
injected failure is responsible for the failure of the handshake.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
USE_PSA_DONE() already checks that there are no used key slots.
The call to TEST_ASSERT() wouldn't have worked properly on failure anyway,
since it would jump back to the exit label.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
The timing module might include time.h on its own when on
a suitable platform, even if MBEDTLS_HAVE_TIME is disabled.
Co-authored-by: Tom Cosgrove <tom.cosgrove@arm.com>
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
mbedtls/mbedtls_config.h (formerly mbedtls/config.h) used to be included
directly in many places, so we wanted to test that all of these places
allowed the MBEDTLS_CONFIG_FILE override. Now mbedtls/mbedtls_config.h is
only included via build_info.h, so this is not relevant anymore.
It is no longer particularly useful to test MBEDTLS_CONFIG_FILE with the
full config, but it isn't harmful either, so keep it that way.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Similar to the previous commit, this commit removes
the word 'multi-part' from the encrypt setup tests.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
After other changes had taken place the call to
PSA_ASSERT( psa_get_key_attributes( key, &attributes ) )
was no longer needed.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Don't depend on the default sizes in the test programs: pass explicit
request and buffer sizes.
Don't depend on MAX_CONTENT_LEN (other than it not being extremely small:
this commit assumes that it will never be less than 101).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
For weistrass curves the pair is encoded as 0x04 || x || y.
Flipping one of the bits in the first byte should be a sure failure.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Force a bitflip in server key to make the raw key
agreement fail, and then verify that no key slots
are left open at the end. Use a Weierstrass curve
to have a high chance of failure upon encountering
such bitflip.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
This commit alters an ASSERT_COMPARE statement
at the end of the aead_encrypt_setup test. This is to
correct a mistake introduced by the preceding PR.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
This commit adds the required changes that arose from
the first round of reviewing. The total_input_data argument
has been removed and so the .data file needed to be edited
also.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Adds test data for the test case where the insufficient
memory error is forced on the driver status.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit adds test data for the case where the
algorithm is not supported by the driver but
the fallback option is available in the library.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
When running check-generated-files in update mode, all generated files were
regenerated. As a consequence,
```
tests/scripts/check-generated-files.sh -u && make
```
always caused most of the code to be rebuilt. Now, if a file hasn't changed,
preserve its original modification time (and other metadata), so the command
above doesn't rebuild anything that has actually not changed.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Otherwise the error status can be PSA_ERROR_INVALID_SIGNATURE instead of the
expected PSA_ERROR_NOT_SUPPORTED in some configurations. For example, the
RSA verification code currently checks the signature size first whenever
PSA_KEY_TYPE_RSA_PUBLIC_KEY is enabled, and only gets into
algorithm-specific code if this passes, so it returns INVALID_SIGNATURE even
if the specific algorithm is not supported.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
They're redundant with the automatically generated test cases, but it's
useful to have them when debugging issues with the test code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit adds tests data for the encrypt setup function
to cover the case where there is insufficent memory when
trying to undertake the operation.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit adds test data needed to test the case where driver
does not support selected algorithm but the library does.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
This commit adds a test called aead_encrypt_setup()
which tests that the relevant drivers get called the correct
amount of times when running the multipart AEAD encrypt
setup API.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
For TLS 1.3 tests, do not force TLS 1.3
version on client to play the negotiation
game whenever possible.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
To maximize the number of tests where MbedTLS
client proposes both TLS 1.2 and TLS 1.3 to
the server, force the TLS 1.2 version on the
server side rather than on the client side
in TLS 1.2 specific tests.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This implies that when both TLS 1.2 and TLS 1.3
are included in the build all the TLS 1.2 tests
using the default configuration now go through
a version negotiation on the client side.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rename ssl_cli.c and ssl_srv.c to reflect the fact
that they are TLS 1.2 specific now. Align there new
names with the TLS 1.3 ones.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
