The non-PSA path has a debug message here, so let's have a similar one
in the PSA case - just add the curve ID to be a bit more informative.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This can be used to validate the server's choice of group in the PSA
case (this will be done in the next commit).
Note that new function doesn't depend on ECP_C, as it only requires
mbedtls_ssl_get_groups(), which is always available. As a general rule,
functions for defining and enforcing policy in the TLS module should not
depend on low-level modules but work with TLS-level identifiers are much
as possible, and this new function follows that principle.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
There's no way currently (see below regarding the future) that ECC-based
key exchanges are enabled without ECP_C being defined. So, the #if was
fully redundant with the checks surrounding the function, as it always
evaluated to true.
The situation arose as, in the old days (before Mbed TLS 2.0),
mbedtls_ssl_conf_curves() (or ssl_set_curves() as it was called back
then) was optional, controlled by its own compile-time option
POLARSSL_SSL_SET_CURVES. So, in turn mbedtls_ssl_check_curve() depended
on POLARSSL_SSL_SET_CURVES too, and all calls to it were guarded by
that.
When it was made non-optional, a blind
s/POLARSSL_SSL_SET_CURVES/MBEDTLS_ECP_C/ was done, which resulted in
stupid situations like this with redundant checks for ECP_C.
Note regarding the future: at some point it will be possible to compile
with ECC-based key exchanges but without ECP_C. This doesn't change
anything to the reasoning above: mbedtls_ssl_check_curve() will be
available in all builds where ECC is used; it will just need a new
definition (with new guards), but that doesn't change anything for its
callers.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Initially this function was doing something because the output format of
psa_export_public() didn't match the ECPoint format that TLS wants.
Then it became a no-op then the output format of psa_export_public()
changed, but it made sense to still keep the function in case the format
changed again. Now that the PSA Crypto API has reached 1.0 status, this
is unlikely to happen, so the no-op function is no longer useful.
Removing it de-clutters the code a bit; while at it we can remove a
temporary stack buffer (that was up to 133 bytes).
It's OK to remove this function even if it was declared in a public
header, as there's a warning at the top of the file saying it's not part
of the public API.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
As PSA_ALG_IS_AEAD( transform->psa_alg ) can't be used as switch labels (switch labels must be constant expressions, they have to be evaluated at compile time) refactor switch to "if else" statement.
Signed-off-by: Przemyslaw Stekiel <przemyslaw.stekiel@mobica.com>
Align the alert type in parse_server_hello
Remove MBEDTLS_SSL_COOKIE_C guard
Enable cookie for both DTLS and TLS1.3
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Add comments for parse hrr key share and cookie
Change variable names based on RFC8466
Refine fatal allerts in parse server hello and hrr
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Move reset transcript for hrr to generic
Reset SHA256 or SHA384 other than both
Rename message layer reset
Add check log for hrr parse successfully
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Avoid coping random bytes in hrr
Send illegal parameter alert when cipher suite mismatch
Send illegal parameter alert when supported_version not exist
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
The implementation was silently overwriting the IV length to 12
even though the caller passed a different value.
Change the behavior to signal that a different length is not supported.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
The implementation was silently overwriting the IV length to 12
even though the caller passed a different value.
Change the behavior to signal that a different length is not supported.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Previously, ecp_add_mixed(), commputing say P+Q, would allow for the
Q parameter to have an unset Z coordinate as a shortcut for Z == 1.
This was leveraged during computation and usage of the T-table
(storing low multiples of the to-be-multiplied point on the curve).
It is a potentially error-prone corner case, though, since an MPIs
with unset data pointer coordinate and limb size 0 is also a valid
representation of the number 0.
As a first step towards removing ECP points with unset Z coordinate,
the constant time T-array getter ecp_select_comb() has previously
been modified to return 'full' mbedtls_ecp_point structures,
including a 1-initialized Z-coordinate.
Similarly, this commit ...
- Modifies ecp_normalize_jac_many() to set the Z coordinates
of the points it operates on to 1 instead of freeing them.
- Frees the Z-coordinates of the T[]-array explicitly
once the computation and normalization of the T-table has finished.
As a minimal functional difference between old and new code,
the new code also frees the Z-coordinate of T[0]=P, which the
old code did not.
- Modifies ecp_add_mixed() to no longer allow unset Z coordinates.
Except for the post-precomputation storage form of the T[] array,
the code does therefore no longer use EC points with unset Z coordinate.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
psa_aead_encrypt_setup() and psa_aead_decrypt_setup() were returning
PSA_ERROR_INVALID_ARGUMENT, while the same failed checks were producing
PSA_ERROR_NOT_SUPPORTED if they happened in psa_aead_encrypt() or
psa_aead_decrypt().
The PSA Crypto API 1.1 spec will specify PSA_ERROR_INVALID_ARGUMENT
in the case that the supplied algorithm is not an AEAD one.
Also move these shared checks to a helper function, to reduce code
duplication and ensure that the functions remain in sync.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
ecp_select_comb() did previously not set the Z coordinate of the target point.
Instead, callers would either set it explicitly or leave it uninitialized,
relying on the (only partly upheld) convention that sometimes an uninitialized
Z value represents 1.
This commit modifies ecp_select_comb() to always set the Z coordinate to 1.
This comes at the cost of memory for a single coordinate, which seems worth
it for the increased robustness.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
At the end of the benchmark program, heap stats are printed, and these
stats will be wrong if we reset counters in the middle.
Also remove the function to reset counters, in order to encourage other
programs to behave correctly as well.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This improves readibility and prepares for further changes
like the introduction of a single double-width temporary for
ECP arithmetic.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Fix library references, tests and programs.
Testing is performed in the already present all.sh test.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
`ecp_add_mixed()` and `ecp_double_jac()` are the core subroutines
for elliptic curve arithmetic, and as such crucial for the performance
of ECP primitives like ECDHE and ECDSA.
This commit provides a very slight simplification and performance and
memory usage improvement to `ecp_add_mixed()` by removing the use of
three temporary MPIs used for coordinate calculations.
Where those variables were used, the code now writes directly to the
coordinate MPIs of the target elliptic curve point.
This is a valid change even if there is aliasing between input and
output, since at the time any of the coordinate MPIs in question is
written, the corresponding coordinates of both inputs are no longer
read.
(The analogous change in `ecp_double_jac()` can not be made since
this property does not hold for `ecp_double_jac()`.)
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
This commit removes code from the Montgomery multiplication routine
`mpi_montmul()` which seems to serve no purpose.
Details: `mpi_montmul()` uses a temporary storage `T` for intermediate
results which is assumed to be of twice the size as the inputs to be
multiplied, and which is used as follows: After the i-th (i=0,1,...)
iteration, the n-limb word starting at `T->p + i + 1` contains the
Montgomery multiplication of B with the limbs 0,..,i of A, and the
variable `d` points to `T->p + i + 1`. In particular, after `n` iterations,
`T->p + n` holds the full multiplication
(subject to conditional subtraction).
As a consequence of this way of using the temporary `T`, the contents
of `{T->p, ..., T->p + i}` are irrelevant after the i-th iteration. Nonetheless,
the code copies `A[i]` to `T->p[i]` at the end of the i-th iterations, which is
redundant and can be removed.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
* Updated the default argument to create less noise with argument
passing.
* Reworded ChangeLog to match MbedTLS documentation/ announcement
requirements
Signed-off-by: Archana <archana.madhavan@silabs.com>
Pylint errors are fixed.
The Python script is improved to take default arguments when not
passed (eg invoked from root of the tree)
check-generated-files.sh and CMakeLists.sh updated.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Moved python script generate_driver_wrappers.py under scripts and
corresponding template file under script/data_files.
Signed-off-by: Archana <archana.madhavan@silabs.com>
The file psa_crypto_driver_wrappers.c is deleted to be autogenerated.
Updated psa_crypto_driver_wrappers.h, this file only contains the
prototypes for the driver wrappers, we don't expect this to be auto
generated.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Having an automatically generated header file makes it harder to have
working build scripts. The content of ssl_debug_helpers_generated.h isn't
likely to change often, so we can update it manually.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Running `generate_ssl_debug_helpers.py` generates both
`ssl_debug_helpers_generated.c` and `ssl_debug_helpers_generated.h`.
List the `.h` file as well as the `.c` file in `check-generated-files.sh` so
that `check-generated-files.sh -u` will complain if it isn't up to date.
List it in `Makefile` and `CMakeLists.txt` so that parallel builds know when
to wait until the `.h` file is present. In `Makefile`, declare the `.c` file
as depending on the `.h` file for order. This way, a dependency for either
will wait until the `.h` file is present, and since the `.h` file is
generated after the `.c` file, this guarantees that the `.c` file is
present.
This fixes random failures of `make -j` from a fresh checkout.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Zeroize temporary buffers used to sanity-check the signature.
If there is an error, overwrite the tentative signature in the output
buffer.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Declare mbedtls_md functions as MBEDTLS_CHECK_RETURN_TYPICAL, meaning that
their return values should be checked.
Do check the return values in our code. We were already doing that
everywhere for hash calculations, but not for HMAC calculations.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Zeroize local MAC variables used for CBC+HMAC cipher suites. In encryption,
this is just good hygiene but probably not needed for security since the
data protected by the MAC that could leak is about to be transmitted anyway.
In DTLS decryption, this could be a security issue since an adversary could
learn the MAC of data that they were trying to inject. At least with
encrypt-then-MAC, the adversary could then easily inject a datagram with
a corrected packet. TLS would still be safe since the receiver would close
the connection after the bad MAC.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_pk_parse_key() makes a temporary copy of the key when it calls
pk_parse_key_pkcs8_encrypted_der(), because that function requires a
writable buffer. pk_parse_key_pkcs8_encrypted_der() always rejects an
empty password, so skip calling it in that case, which allows us to
skip the allocation as well.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
As we have now a minimal viable implementation of TLS 1.3,
let's remove EXPERIMENTAL from the config option enabling
it.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
"mbedtls_ssl_handshake_params: reorder fields to save code size" moved this
filed earlier along with byte-sized fields that should be in the 128-element
access window on Arm Thumb. This took away precious room in the 128-byte
window. Move it back further out.
Results (same architecture, config-suite-b.h + MBEDTLS_ECDH_LEGACY_CONTEXT +
MBEDTLS_ECP_RESTARTABLE):
library/ssl_cli.o: 2860 -> 2816 (diff: 44)
library/ssl_msg.o: 3080 -> 3076 (diff: 4)
library/ssl_srv.o: 3340 -> 3300 (diff: 40)
library/ssl_tls.o: 6546 -> 6478 (diff: 68)
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The current testing of the PSA configuration is
based on test code located in the library itself.
Remove this code as we are moving to using a
test library instead.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rename test driver entry points to
libtestdriver1_<name of the Mbed TLS entry point>.
This aligns with the renaming of all Mbed TLS APIs
for the test driver library (that will be put in place
in the following commits) to avoid name conflicts
when linking it with the Mbed TLS library.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of the driver test entry points to be
provided by a test driver library, move their prototypes
to tests directory.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In psa_asymmetric_encrypt/decrypt(), always return
PSA_ERROR_INVALID_ARGUMENT if the key is a PSA key
and the algorithm is not a PSA algorithm we know
about, whether RSA is supported or not.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Define test driver entry points that provide an alternative
to Mbed TLS driver entry points only when the PSA configuration
is used. Their purpose is only to test the PSA configuration
thus there is no good reason to use them out of this scope.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The test entry points defined in psa_crypto_hash.c
and psa_crypto_mac.c are supposed to be exact
clones of the Mbed TLS driver entry points. Thus
the operation type should be the Mbed TLS operation
type not a test one. There was no compilation error
as the hash and cipher operation test types are
currently equal to the Mbed TLS ones.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Align RSA/ECP sign/verify hash dispatch with the
corresponding code of the library. The library
code was modified recently but not the test code
one and these modifications ease the following work.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Reorder fields mbedtls_ssl_handshake_params in order to save code on Arm
Thumb builds. The general idea is to put often-used fields in the direct
access window of 128 elements from the beginning of the structure.
The reordering is a human selection based on a report of field offset and
use counts, and informed by measuring the code size with various
arrangements. Some notes:
* This is the same reordering as the corresponding commit in #5189 for 2.2x.
* I moved most byte-sized fields at the beginning where they're sure to be
in the direct access window.
* I moved buffering earlier because it can be around the threshold depending
on the configuration, and it's accessed in a lot of places.
* I moved several fields, including update_checksum and friends, early so
that they're guaranteed to be in the early access window.
Results (arm-none-eabi-gcc 7.3.1, build_arm_none_eabi_gcc_m0plus build):
library/ssl_cli.o: 19763 -> 19687 (diff: 76)
library/ssl_msg.o: 24874 -> 24834 (diff: 40)
library/ssl_srv.o: 20754 -> 20562 (diff: 192)
library/ssl_tls.o: 21003 -> 20907 (diff: 96)
library/ssl_tls13_client.o: 7284 -> 7272 (diff: 12)
library/ssl_tls13_generic.o: 4749 -> 4721 (diff: 28)
library/ssl_tls13_keys.o: 5133 -> 5077 (diff: 56)
Results (same architecture, config-suite-b.h + MBEDTLS_ECDH_LEGACY_CONTEXT +
MBEDTLS_ECP_RESTARTABLE):
library/ssl_cli.o: 3000 -> 2936 (diff: 64)
library/ssl_msg.o: 3084 -> 3080 (diff: 4)
library/ssl_srv.o: 3428 -> 3400 (diff: 28)
library/ssl_tls.o: 6754 -> 6730 (diff: 24)
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Replace bitfields mbedtls_ssl_handshake_params by bytes. This saves some
code size, and since the bitfields weren't group, this doesn't increase the
RAM usage.
Replace several ints that only store values in the range 0..255 by uint8_t.
This can increase or decrease the code size depending on the architecture
and on how the field is used. I chose changes that save code size on Arm
Thumb builds and will save more after field reordering.
Leave the bitfields in struct mbedtls_ssl_hs_buffer alone: replacing them by
uint8_t slightly increases the code size.
Results (arm-none-eabi-gcc 7.3.1, build_arm_none_eabi_gcc_m0plus build):
library/ssl_cli.o: 19759 -> 19763 (diff: -4)
library/ssl_srv.o: 20790 -> 20754 (diff: 36)
library/ssl_tls13_keys.o: 5153 -> 5133 (diff: 20)
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't use the output buffer in psa_aead_generate_nonce()
to pass the generated nonce to the driver as a local
attacker could potentially control it.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Don't use the output buffer in psa_cipher_encrypt()
to pass the generated IV to the driver as local
attacker could potentially control it.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Align the execution of cipher one-shot APIs with
that of cipher multi-part APIs: always exit
through the exit-labelled section.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Don't use the output buffer in psa_cipher_generate_iv()
to pass the generated IV to the driver as local
attacker could potentially control it.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Move fields around to have fewer accesses outside the 128-element Thumb
direct access window.
Make the same change as in 2.27+, for the same small benefit.
Results (arm-none-eabi-gcc 7.3.1, build_arm_none_eabi_gcc_m0plus build):
library/psa_crypto.o: 16434 -> 16414 (diff: 20)
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove support signature PKCS1 v1.5 in CertificateVerify.
Remove useless server states in test script
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Change client test code to support rsa pss signatures
Add test cases for rsa pss signature in ssl-opt.sh
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
psa_key_derivation_output_key: prioritize BAD_STATE over NOT_PERMITTED
If psa_key_derivation_output_key() is called on an operation which hasn't been
set up or which has been aborted, return PSA_ERROR_BAD_STATE. Only return
PSA_ERROR_NOT_PERMITTED if the operation state is ok for
psa_key_derivation_input_bytes() or psa_key_derivation_output_bytes() but not
ok to output a key.
Ideally psa_key_derivation_output_key() would return PSA_ERROR_NOT_PERMITTED
only when psa_key_derivation_output_bytes() is possible, but this is clumsier
to implement.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
Previously passing a NULL or zero length password into either
mbedtls_pkcs12_pbe() or mbedtls_pkcs12_derive() could cause an infinate
loop, and it was also possible to pass a NULL password, with a non-zero
length, which would cause memory corruption.
I have fixed these errors, and improved the documentation to reflect the
changes and further explain what is expected of the inputs.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Remove client certificate verify in tests.
Change the layout of structure to fix abi_api check issues.
Add comments of Finished.
Align with the coding styles.
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
This is a workaround for an issue with mkstemp() in older MinGW releases that
causes simultaneous creation of .a files in the same directory to fail.
Fixes#5146
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
Change debug messag for server finished.
Change name of generate_application_keys.
Remove the client vertificate tests from ssl-opt.sh.
Add test strings for server finished in ssl-opt.sh.
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Move set_state function into client
Add back export_key callback function in generate
application keys
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Fix the variable not inialized issue, remove the client
certificate related code, remove early data related code.
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
The current definition of PSA_ALG_IS_HASH_AND_SIGN includes
PSA_ALG_RSA_PKCS1V15_SIGN_RAW and PSA_ALG_ECDSA_ANY, which don't strictly
follow the hash-and-sign paradigm: the algorithm does not encode a hash
algorithm that is applied prior to the signature step. The definition in
fact encompasses what can be used with psa_sign_hash/psa_verify_hash, so
it's the correct definition for PSA_ALG_IS_SIGN_HASH. Therefore this commit
moves definition of PSA_ALG_IS_HASH_AND_SIGN to PSA_ALG_IS_SIGN_HASH, and
replace the definition of PSA_ALG_IS_HASH_AND_SIGN by a correct one (based
on PSA_ALG_IS_SIGN_HASH, excluding the algorithms where the pre-signature
step isn't to apply the hash encoded in the algorithm).
In the definition of PSA_ALG_SIGN_GET_HASH, keep the condition for a nonzero
output to be PSA_ALG_IS_HASH_AND_SIGN.
Everywhere else in the code base (definition of PSA_ALG_IS_SIGN_MESSAGE, and
every use of PSA_ALG_IS_HASH_AND_SIGN outside of crypto_values.h), we meant
PSA_ALG_IS_SIGN_HASH where we wrote PSA_ALG_IS_HASH_AND_SIGN, so do a
global replacement.
```
git grep -l IS_HASH_AND_SIGN ':!include/psa/crypto_values.h' | xargs perl -i -pe 's/ALG_IS_HASH_AND_SIGN/ALG_IS_SIGN_HASH/g'
```
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The makefile build specifies -L. -lmbedx509 -lmbedcrypto flags first,
and only then object files referencing symbols from those libraries.
In this order the linker will not add the linked libraries to the
DT_NEEDED section because they are not referenced yet (at least that
happens for me on ubuntu 20.04 with the default gnu compiler tools).
By first specifying the object files and then the linked libraries, we
do end up with libmbedx509 and libmbedcrypto in the DT_NEEDED sections.
This way running dlopen(...) on libmedtls.so just works.
Note that the CMake build does this by default.
Signed-off-by: Harmen Stoppels <harmenstoppels@gmail.com>
The refactoring is needed for the group api to work
properly. Code is modified to use mbedtls_get_supported_groups
instead of direct access so that both deprecated and new api
are useable.
Signed-off-by: Brett Warren <brett.warren@arm.com>
mbedtls_ssl_conf_groups allows supported groups for key
sharing to be configured via their IANA NamedGroup ID.
This is added in anticipation of PQC and Hybrid key
sharing algorithms being integrated into Mbed TLS.
mbedtls_ssl_conf_curves is deprecated in favor of
mbedtls_ssl_conf_groups. handshake_init has been
modified to translate and copy curves configured
via conf_curves into a heap allocatied array of
NamedGroup IDs. This allows the refactoring of code
interacting with conf_curve related variables (such
as curve_list) to use NamedGroup IDs while retaining
the deprecated API.
Signed-off-by: Brett Warren <brett.warren@arm.com>
To test c <= high, instead of testing the sign of (high + 1) - c, negate the
sign of high - c (as we're doing for c - low). This is a little easier to
read and shaves 2 instructions off the arm thumb build with
arm-none-eabi-gcc 7.3.1.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
n was used for two different purposes. Give it a different name the second
time. This does not seem to change the generated code when compiling with
optimization for size or performance.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Instead of doing constant-flow table lookup, which requires 64 memory loads
for each lookup into a 64-entry table, do a range-based calculation, which
requires more CPU instructions per range but there are only 5 ranges.
I expect a significant performance gain (although smaller than for decoding
since the encoding table is half the size), but I haven't measured. Code
size is slightly smaller.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Document what each local variable does when it isn't obvious from the name.
Don't reuse a variable for different purposes.
This commit has very little impact on the generated code (same code size on
a sample Thumb build), although it does fix a theoretical bug that 2^32
spaces inside a line would be ignored instead of treated as an error.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Instead of doing constant-flow table lookup, which requires 128 memory loads
for each lookup into a 128-entry table, do a range-based calculation, which
requires more CPU instructions per range but there are only 5 ranges.
Experimentally, this is ~12x faster on my PC (based on
programs/x509/load_roots). The code is slightly smaller, too.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Base64 decoding uses equality comparison tests for characters that don't
leak information about the content of the data other than its length, such
as whitespace. Do this with '=' as well, since it only reveals information
about the length. This way the table lookup can focus on character validity
and decoding value.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When the option is On, CMake will have rules to generate the generated
files using scripts etc. When the option is Off, CMake will assume the
files are available from the source tree; in that mode, it won't require
any extra tools (Perl for example) compared to when we committed the
files to git.
The intention is that users will never need to adjust this option:
- in the development branch (and features branches etc.) the option is
always On (development mode);
- in released tarballs, which include the generated files, we'll switch
the option to Off (release mode) in the same commit that re-adds the
generated files.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This comment is about how the functions are implemented, not about their
public interface, so it doesn't belong in the header file.
It applies to everything in constant_time.c so moved there.
Signed-off-by: Gabor Mezei <gabor.mezei@arm.com>
TLS1.3:add read ptr and handshake kex modes
CI merge job: only "Session resume using tickets, DTLS: openssl client" failed in one component thus CI can be considered as passed.
TLS 1.3: ServerHello: add utils functions used by ServerHello
Regarding the merge job, there was only one of the failure we currently encounter on almost all PR (Session resume using tickets, DTLS: openssl client test case see #5012) thus we can consider that this PR passed CI.
PSA_ALG_RSA_PSS algorithm now accepts only the same salt length for
verification that it produces when signing, as documented.
Fixes#4946.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move GCM's update output buffer length verification
from PSA AEAD to the built-in implementation of the GCM.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
The requirement of minimum 15 bytes for output buffer in
psa_aead_finish() and psa_aead_verify() does not apply
to the built-in implementation of the GCM.
Alternative implementations are expected to verify the
length of the provided output buffers and to return
the MBEDTLS_ERR_GCM_BUFFER_TOO_SMALL in case the
buffer length is too small.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
An initialization vector IV can have any number of bits between 1 and
2^64. So it should be filled to the lower 64-bit in the last step
when computing ghash.
Signed-off-by: openluopworld <luopengxq@gmail.com>
This function is one common function in generic file, get it from
the encrypted extension and submit one patch independently.
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
When not using DEBUG_C, but using the DTLS CID feature -
a null pointer was accessed in ssl_tls.c.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
This option only gated an ability to set a callback,
but was deemed unnecessary as it was yet another define to
remember when writing tests, or test configurations. Fixes#4653.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Switch from using MBEDTLS_PSA_BUILTIN_ macros over to using PSA_WANT_
macros, as code was moved from the internal drivers to the PSA Core.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Nonce length checks are now being used in the oneshot AEAD code as well,
which passes variant algorithms, not the base version, so need to
convert to base if necessary.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
The equality checker functions always return 0 or 1 value,
thus the type of return value can be the same dispite of the
size of the parameters.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Tne unpadding part of `mbedtls_rsa_rsaes_pkcs1_v15_decrypt` function is
contant-time therefore it moved to a separate function to be prepared
for moving to the contant-time module.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Add a constant-time function with size_t parameter for choosing
between two integer values, like the ?: ternary operator.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
All function declaration provided by ssl_invasive.h is needed only for
testing purposes and all of them are provided by constant_time.h as well.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Elinimate macros defined by modules locally in the functions that are
moving to the new constant-time module.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
There were multiple functions called mbedtls_cf_size_bool_eq. They had exactly
the same behavior, so move the one in bignum.c and remove the other.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Declare all AES and DES functions that return int as needing to have
their result checked, and do check the result in our code.
A DES or AES block operation can fail in alternative implementations of
mbedtls_internal_aes_encrypt() (under MBEDTLS_AES_ENCRYPT_ALT),
mbedtls_internal_aes_decrypt() (under MBEDTLS_AES_DECRYPT_ALT),
mbedtls_des_crypt_ecb() (under MBEDTLS_DES_CRYPT_ECB_ALT),
mbedtls_des3_crypt_ecb() (under MBEDTLS_DES3_CRYPT_ECB_ALT).
A failure can happen if the accelerator peripheral is in a bad state.
Several block modes were not catching the error.
This commit does the following code changes, grouped together to avoid
having an intermediate commit where the build fails:
* Add MBEDTLS_CHECK_RETURN to all functions returning int in aes.h and des.h.
* Fix all places where this causes a GCC warning, indicating that our code
was not properly checking the result of an AES operation:
* In library code: on failure, goto exit and return ret.
* In pkey programs: goto exit.
* In the benchmark program: exit (not ideal since there's no error
message, but it's what the code currently does for failures).
* In test code: TEST_ASSERT.
* Changelog entry.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Also fiixed the following merge problems:
crypto_struct.h : Added MBEDTLS_PRIVATE to psa_aead_operation_s
members (merge conflict)
psa_crypto_aead.c : Added ciphertext_length to mbedtls_gcm_finish
call (change of API during development)
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Add memory constraints to the aarch64 inline assembly in MULADDC_STOP.
This fixes an issue where Clang 12 and 13 were generating
non-functional code on aarch64 platforms. See #4962, #4943
for further details.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Now that support for earlier version have been removed, we no longer
need to care about them.
Since TLS 1.3 is being gradually introduced, we might still need a
version check in some places - but here the function is called
ssl_tls12_populate_tranform() and TLS 1.3 has its own function
mbedtls_ssl_tls13_populate_transform(), so when this function is called
we just know we're using TLS 1.2.
Reviewer hint: use the -b option of git diff / git show
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Use the encoding from an upcoming version of the specification.
Add as much (or as little) testing as is currently present for Camellia.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
An initialization vector IV can have any number of bits between 1 and
2^64. So it should be filled to the lower 64-bit in the last step
when computing ghash.
Signed-off-by: openluopworld <luopengxq@gmail.com>
An initialization vector IV can have any number of bits between 1 and
2^64. So it should be filled to the lower 64-bit in the last step
when computing ghash.
Signed-off-by: openluopworld <luopengxq@gmail.com>
An initialization vector IV can have any number of bits between 1 and
2^64. So it should be filled to the lower 64-bit in the last step
when computing ghash.
Signed-off-by: openluopworld <luopengxq@gmail.com>
MULADDC_CORE reads from (%%rsi) and writes to (%%rdi). This fragment is
repeated up to 16 times, and %%rsi and %%rdi are s and d on entry
respectively. Hence the complete asm statement reads 16 64-bit words
from memory starting at s, and writes 16 64-bit words starting at d.
Without any declaration of modified memory, Clang 12 and Clang 13 generated
non-working code for mbedtls_mpi_mod_exp. The constraints make the unit
tests pass with Clang 12.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This parameter was set but not used, which was pointless. Clang 14 detects
this and legitimately complains.
Remove the parameter. This is an internal function, only called once. The
caller already has a sufficient check on the output buffer size which
applies in more cases, so there is no real gain in robustness in adding the
same check inside the internal function.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The target attributes for key copy could have key bits and
type zeroed. If so, they need to be overwritten/ inherited
from the source key.
This is now forcefully overwritten after validating the
optional attributes. As a result assigning attributes type
and bits after copy are no longer necessary.
Signed-off-by: Archana <archana.madhavan@silabs.com>
A minimal test driver extension is added to support
copy of opaque keys within the same location.
Test vector support is extended to cover opaque keys.
Signed-off-by: Archana <archana.madhavan@silabs.com>
The validation against key width and max key bits is extended to
all key types from the existing validation for only symmetric keys.
Signed-off-by: Archana <archana.madhavan@silabs.com>
-Add test driver support to import/export while wrapping keys
meant to be stored in the PSA core as opaque( emulating an
SE without storage ).
-Export validate_unstructured_key_bit_size as
psa_validate_unstructured_key_bit_size, thereby changing its scope.
-Improve the import/export test cases in test_suite_psa_crypto to also
cover opaque keys, thereby avoiding duplication.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Create a new sizing function for determining the size required for key
storage based on the input key data.
This is required for key imports where the key length might need to be
derived from the data.
Signed-off-by: Archana <archana.madhavan@silabs.com>
The report of RSA public exponent for opaque keys is not
supported. Do not attempt to compute the RSA public
exponent of an RSA opaque key associated to a driver
implementing the new driver interface when
MBEDTLS_PSA_CRYPTO_SE_C is disabled.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Slot number key attribute is specific of dynamically
registered drivers and should thus not be computed/
returned in case of keys associated to drivers
implementing the new unified driver interface.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Clarify the purpose of
psa_get_and_lock_transparent_key_slot_with_policy() and
define it even when MBEDTLS_PSA_CRYPTO_SE_C is disabled
for the purpose of static drivers.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
cleanup `ssl_tls13_write_client_hello_body`, fix comments issues.
And move ciphersuites to separate function
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
This reverts commit cc88b34f7942f57ea0fd27ee4b3e29f49c91f10e.
It causes many test fail. It should be re-considered.
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
mbedtls_cipher_setkey takes an int argument. Cast explicitly, otherwise MSVC
complains.
Where possible, just stick to size_t.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Warning reported with IAR compiler:
"mbedtls\library\pkparse.c",1167 Warning[Pe550]: variable "ret" was set but never used
Signed-off-by: Kenneth Soerensen <knnthsrnsn@gmail.com>
Conflicts:
library/ccm.c
Conflict resolved by re-applying the MBEDTLS_BYTE_0 macro.
Conflict resolved by ignoring the MBEDTLS_PUT_UINT16_BE macro
used in development branch on the 'b' buffer, because the 'b'
buffer is removed in current branch.
exchange groups of the byte reading macros with MBEDTLS_PUT_UINTxyz
and then shift the pointer afterwards. Easier to read as you can
see how big the data is that you are putting in, and in the case of
UINT32 AND UINT64 it saves some vertical space.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
exchange groups of the byte reading macros with MBEDTLS_PUT_UINTxyz
and then shift the pointer afterwards. Easier to read as you can
see how big the data is that you are putting in, and in the case of
UINT32 AND UINT64 it saves some vertical space.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Move common encrypt / decrypt code into common function, and roll in
previously refactored setup checks function, as this is now the only
place it is called.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
minor changes, such as improving the documentation for the byte reading
macros, and using MBEDTLS_PUT_UINT16_xy in place of byte reading
macro combinations
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Replace the contents of MBEDTLS_PUT_UINTx_yz contained inconsitent
but similar/duplicate code to the MBEDTLS_BYTE_x macros. Therefore
the contents of the macros now utilise the byte reading macros.
MBEDTLS_PUT_UINT64_LE's written order was also not consitent with
the other PUT macros, so that was modified.
Documentation comment said LSB instead of MSB and that has also been
resolved.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
byte shifting opertations throughout library/ were only replaced with
the byte reading macros when an 0xff mask was being used.
The byte reading macros are now more widley used, however they have not
been used in all cases of a byte shift operation, as it detracted from
the immediate readability or otherwise did not seem appropriate.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Copy over the GET/PUT_UINT64_LE/BE macros from aes.c and sha512.c
Add the MBEDTLS_ prefix to all 4 macros.
Modify the GET_UINT64 macros to no longer take a target variable
as a parameter, so when the macro function is called it must be
assigned to a variable in the same statement.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
The CHAR macros casted to an unsigned char which in this project
is garunteed to be 8 bits - the same as uint8_t (which BYTE casts
to) therefore, instances of CHAR have been swapped with BYTE and
the number of macros have been cut down
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
aria.c has a shift by 3 bytes, but does not use the 0xff masking.
aparently this is not a problem and it is tidier to use the maco.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Imrpoved the descriptions of the macros and parameters and
changing the name of the MBEDTLS_PUT_UINT... macro parameters
to be more descriptive
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
These cast to an unsigned char rather than a uint8_t
like with MBEDTLS_BYTE_x
These save alot of space and will improve maintence by
replacing the appropriate code with MBEDTLS_CHAR_x
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
The GET macros used to write to a macro parameter, but now
they can be used to assign a value to the desired variable
rather than pass it in as an argument and have it modified
in the macro function.
Due to this MBEDTLS_BYTES_TO_U32_LE is the same as
MBEDTLS_GET_UINT32_LE and was there for replaced in the
appropriate files and removed from common.h
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Added documenttion comments to common.h and removed the changelog
as it is not really necessary for refactoring.
Also modified a comment in aria.c to be clearer
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Although these only appear in one file: psa_crypto_storage.c
it is tidy to give it the same prefix as the UINT32 macros
and to store them in the fame file
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
As per tests/scripts/check-names.sh, macros in
library/ header files should be prefixed with
MBEDTLS_
The macro functions in common.h where also indented
to comply with the same test
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
The use of the BYTE_x macro in nist_kw did not seem appropriate
in hind sight as it is working with a character array not an int
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
missed do-while around function-like macros (UINT32_BE and
UINT_LE macros) originally present in the indivdual files,
before being moved to common.h.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
32-bit integer manipulation macros (little edian):
GET_UINT32_LE and PUT_UINT32_LE appear in several
files in library/.
Removes duplicate code and save vertical
space the macro has been moved to common.h.
Improves maintainability.
Also provided brief comment in common.h for
BYTES_TO_U32_LE. comment/documentation will
probably need to be edited further for all
recent additions to library/common.h
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
32-bit integer manipulation macros (big edian):
GET_UINT32_BE and PUT_UINT32_BE appear in several
files in library/.
Removes duplicate code and save vertical
space the macro has been moved to common.h.
Improves maintainability.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
The macro BYTES_TO_U32_LE appears in poly1305.c and
chacha20.c.
Removes duplicate code and save vertical
space the macro has been moved to common.h.
Improves maintainability.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
To improve readability by saving horizontal and vertical space.
Removed unecessary & 0xFF.
Byte reading macros implemented in library/common.h, All files
containing "& 0xff" were modified.
Comments/Documentation not yet added to the macro definitions.
Fixes#4274
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
To keep consistent with ssl_{clien2t,server2}.
Change-Id: I08dbe47a3d9b778ba3acad283f608fef4e63c626
CustomizedGitHooks: yes
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
The psa_open_key API depends on MBEDTLS_PSA_CRYPTO_STORAGE_C.
This is unnecessary for builtin keys and so is fixed.
Updated an open_fail test vector keeping with the same.
Signed-off-by: Archana <archana.madhavan@silabs.com>
