psa_aead_encrypt_setup() and psa_aead_decrypt_setup() were returning
PSA_ERROR_INVALID_ARGUMENT, while the same failed checks were producing
PSA_ERROR_NOT_SUPPORTED if they happened in psa_aead_encrypt() or
psa_aead_decrypt().
The PSA Crypto API 1.1 spec will specify PSA_ERROR_INVALID_ARGUMENT
in the case that the supplied algorithm is not an AEAD one.
Also move these shared checks to a helper function, to reduce code
duplication and ensure that the functions remain in sync.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
In psa_asymmetric_encrypt/decrypt(), always return
PSA_ERROR_INVALID_ARGUMENT if the key is a PSA key
and the algorithm is not a PSA algorithm we know
about, whether RSA is supported or not.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Align RSA/ECP sign/verify hash dispatch with the
corresponding code of the library. The library
code was modified recently but not the test code
one and these modifications ease the following work.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Don't use the output buffer in psa_aead_generate_nonce()
to pass the generated nonce to the driver as a local
attacker could potentially control it.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Don't use the output buffer in psa_cipher_encrypt()
to pass the generated IV to the driver as local
attacker could potentially control it.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Align the execution of cipher one-shot APIs with
that of cipher multi-part APIs: always exit
through the exit-labelled section.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Don't use the output buffer in psa_cipher_generate_iv()
to pass the generated IV to the driver as local
attacker could potentially control it.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Move fields around to have fewer accesses outside the 128-element Thumb
direct access window.
Make the same change as in 2.27+, for the same small benefit.
Results (arm-none-eabi-gcc 7.3.1, build_arm_none_eabi_gcc_m0plus build):
library/psa_crypto.o: 16434 -> 16414 (diff: 20)
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
psa_key_derivation_output_key: prioritize BAD_STATE over NOT_PERMITTED
If psa_key_derivation_output_key() is called on an operation which hasn't been
set up or which has been aborted, return PSA_ERROR_BAD_STATE. Only return
PSA_ERROR_NOT_PERMITTED if the operation state is ok for
psa_key_derivation_input_bytes() or psa_key_derivation_output_bytes() but not
ok to output a key.
Ideally psa_key_derivation_output_key() would return PSA_ERROR_NOT_PERMITTED
only when psa_key_derivation_output_bytes() is possible, but this is clumsier
to implement.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
The current definition of PSA_ALG_IS_HASH_AND_SIGN includes
PSA_ALG_RSA_PKCS1V15_SIGN_RAW and PSA_ALG_ECDSA_ANY, which don't strictly
follow the hash-and-sign paradigm: the algorithm does not encode a hash
algorithm that is applied prior to the signature step. The definition in
fact encompasses what can be used with psa_sign_hash/psa_verify_hash, so
it's the correct definition for PSA_ALG_IS_SIGN_HASH. Therefore this commit
moves definition of PSA_ALG_IS_HASH_AND_SIGN to PSA_ALG_IS_SIGN_HASH, and
replace the definition of PSA_ALG_IS_HASH_AND_SIGN by a correct one (based
on PSA_ALG_IS_SIGN_HASH, excluding the algorithms where the pre-signature
step isn't to apply the hash encoded in the algorithm).
In the definition of PSA_ALG_SIGN_GET_HASH, keep the condition for a nonzero
output to be PSA_ALG_IS_HASH_AND_SIGN.
Everywhere else in the code base (definition of PSA_ALG_IS_SIGN_MESSAGE, and
every use of PSA_ALG_IS_HASH_AND_SIGN outside of crypto_values.h), we meant
PSA_ALG_IS_SIGN_HASH where we wrote PSA_ALG_IS_HASH_AND_SIGN, so do a
global replacement.
```
git grep -l IS_HASH_AND_SIGN ':!include/psa/crypto_values.h' | xargs perl -i -pe 's/ALG_IS_HASH_AND_SIGN/ALG_IS_SIGN_HASH/g'
```
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The requirement of minimum 15 bytes for output buffer in
psa_aead_finish() and psa_aead_verify() does not apply
to the built-in implementation of the GCM.
Alternative implementations are expected to verify the
length of the provided output buffers and to return
the MBEDTLS_ERR_GCM_BUFFER_TOO_SMALL in case the
buffer length is too small.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Switch from using MBEDTLS_PSA_BUILTIN_ macros over to using PSA_WANT_
macros, as code was moved from the internal drivers to the PSA Core.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Nonce length checks are now being used in the oneshot AEAD code as well,
which passes variant algorithms, not the base version, so need to
convert to base if necessary.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Also fiixed the following merge problems:
crypto_struct.h : Added MBEDTLS_PRIVATE to psa_aead_operation_s
members (merge conflict)
psa_crypto_aead.c : Added ciphertext_length to mbedtls_gcm_finish
call (change of API during development)
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Use the encoding from an upcoming version of the specification.
Add as much (or as little) testing as is currently present for Camellia.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The target attributes for key copy could have key bits and
type zeroed. If so, they need to be overwritten/ inherited
from the source key.
This is now forcefully overwritten after validating the
optional attributes. As a result assigning attributes type
and bits after copy are no longer necessary.
Signed-off-by: Archana <archana.madhavan@silabs.com>
A minimal test driver extension is added to support
copy of opaque keys within the same location.
Test vector support is extended to cover opaque keys.
Signed-off-by: Archana <archana.madhavan@silabs.com>
The validation against key width and max key bits is extended to
all key types from the existing validation for only symmetric keys.
Signed-off-by: Archana <archana.madhavan@silabs.com>
-Add test driver support to import/export while wrapping keys
meant to be stored in the PSA core as opaque( emulating an
SE without storage ).
-Export validate_unstructured_key_bit_size as
psa_validate_unstructured_key_bit_size, thereby changing its scope.
-Improve the import/export test cases in test_suite_psa_crypto to also
cover opaque keys, thereby avoiding duplication.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Create a new sizing function for determining the size required for key
storage based on the input key data.
This is required for key imports where the key length might need to be
derived from the data.
Signed-off-by: Archana <archana.madhavan@silabs.com>
The report of RSA public exponent for opaque keys is not
supported. Do not attempt to compute the RSA public
exponent of an RSA opaque key associated to a driver
implementing the new driver interface when
MBEDTLS_PSA_CRYPTO_SE_C is disabled.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Slot number key attribute is specific of dynamically
registered drivers and should thus not be computed/
returned in case of keys associated to drivers
implementing the new unified driver interface.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Clarify the purpose of
psa_get_and_lock_transparent_key_slot_with_policy() and
define it even when MBEDTLS_PSA_CRYPTO_SE_C is disabled
for the purpose of static drivers.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Move common encrypt / decrypt code into common function, and roll in
previously refactored setup checks function, as this is now the only
place it is called.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
As per tests/scripts/check-names.sh, macros in
library/ header files should be prefixed with
MBEDTLS_
The macro functions in common.h where also indented
to comply with the same test
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
To improve readability by saving horizontal and vertical space.
Removed unecessary & 0xFF.
Byte reading macros implemented in library/common.h, All files
containing "& 0xff" were modified.
Comments/Documentation not yet added to the macro definitions.
Fixes#4274
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
We already did this on failure, but make sure the buffer does not leak
what was in it previously on success
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
The error is currently never returned to any function that PSA calls,
but keep mbedtls_to_psa_error up to date in case this changes.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Ensure finish only called when encrypting and verify only called for
decrypting, and add tests to ensure this.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
I wrote a function to determine the base algorithm given a variant,
however this is already implemented by
PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Introduce psa_mac_compute_internal with an
additional `is_sign` parameter compared to
the psa_mac_compute API. The intent is to
call psa_mac_compute_internal() from
psa_mac_verify() as well to compute the
message MAC.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Re-organize psa_mac_setup() to prepare the move
to a dedicated function of the additional checks
on the algorithm and the key attributes done by
this function. We want to move those checks in
a dedicated function to be able to do them
without duplicating them in psa_mac_compute().
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This makes it easier to ensure that crypto_spe.h is included everywhere it
needs to be, and that it's included early enough to do its job (it must be
included before any mention of psa_xxx() functions with external linkage,
because it defines macros to rename these functions).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Implement one-shot MAC APIs, psa_mac_compute and psa_mac_verify, introduced in PSA Crypto API 1.0.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
mbedtls_rsa_set_padding() now returns the error
code MBEDTLS_ERR_RSA_INVALID_PADDING when
padding parameters are invalid.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add comment to the effect that we cannot really check nonce size as the
GCM spec allows almost arbitrarily large nonces. As a result of this,
change the operation nonce over to an allocated buffer to avoid overflow
situations.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
On space-constrained platforms, it is a useful configuration to be able
to import/export and perform RSA key pair operations, but to exclude RSA
key generation, potentially saving flash space. It is not possible to
express this with the PSA_WANT_ configuration system at the present
time. However, in previous versions of Mbed TLS (v2.24.0 and earlier) it
was possible to configure a software PSA implementation which was
capable of making RSA signatures but not capable of generating RSA keys.
To do this, one unset MBEDTLS_GENPRIME.
Since the addition of MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR, this
expressivity was lost. Expressing that you wanted to work with RSA key
pairs forced you to include the ability to generate key pairs as well.
Change psa_crypto_rsa.c to only call mbedtls_rsa_gen_key() if
MBEDTLS_GENPRIME is also set. This restores the configuration behavior
present in Mbed TLS v2.24.0 and earlier versions.
It left as a future exercise to add the ability to PSA to be able to
express a desire for a software or accelerator configuration that
includes RSA key pair operations, like signature, but excludes key pair
generation.
Without this change, linker errors will occur when attempts to call,
which doesn't exist when MBEDTLS_GENPRIME is unset.
psa_crypto_rsa.c.obj: in function `rsa_generate_key':
psa_crypto_rsa.c:320: undefined reference to `mbedtls_rsa_gen_key'
Fixes#4512
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
Removes mode parameter from
mbedtls_rsa_rsaes_oaep_encrypt and propagates
changes throughout the codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Removal of the mode parameter from
mbedtls_rsa_pkcs1_encrypt function. This change
is propagated throughout the codebase and to
relevant tests.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Split to data required for internal implementation and data required for
driver implementation with data left over for the PSA layer.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
To avoid code duplication of the old-style SE interface usage
call psa_driver_wrapper_sign/verify_hash function instead of
the direct internal functions.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Use common funtion for psa_sign_hash and psa_sign_message and one for
psa_verify_hash and psa_verify_message to unify them.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Removing the mode parameter from the mbedtls_rsa_rsaes_oaep_decrypt
function. The change is progagated to all function calls, including in
test suite .function files. Additionally fully removing one test
where the wrong mode was being tested.
Signed-off-by: Tom Daubney <Thomas.Daubney@arm.com>
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
The mode parameter has been removed from the
mbedtls_rsa_pkcs1_decrypt function. The change
has been progagated to all function calls,
including in test suite .function files.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Since a valid mac operation context would guarantee that the stored
mac size is >= 4, it wasn't immediately obvious that the zero-length
check is meant for static analyzers and a bit of robustness.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
It makes sense to do the length checking in the core rather than expect
each driver to deal with it themselves. This puts the onus on the core to
dictate which algorithm/key combinations are valid before calling a driver.
Additionally, this commit also updates the psa_mac_sign_finish function
to better deal with output buffer sanitation, as per the review comments
on #4247.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
This means there is no longer a need to have an internal HMAC API, so
it is being removed in this commit as well.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Prefix with 'mbedtls_psa' as per the other types which implement some
sort of algorithm in software.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Now renamed to mbedtls_psa_safer_memcmp, it provides a single location
for buffer comparison.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
* Early return since there's nothing to clean up
* Get rid of unnecessary local variable
* Check algorithm validity for MAC in the PSA core instead of in the driver
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Typedef'ed structures are suffixed _t
Also updated the initialiser macro with content that actually
matches the structure's content.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Since HMAC moved into its own compilation unit, the internal API needed
to be documented and finalized. This means no more reaching deep into
the operation structure from within the PSA Crypto core. This will make
future refactoring work easier, since internal HMAC is now opaque to the
core.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Step 3/x in moving the driver. Separate commits should make for easier
review.
Additional changes on top of code movement:
* Copied the implementation of safer_memcmp from psa_crypto into
psa_cipher_mac since the mac_verify driver implementation
depends on it, and it isn't available through external linkage
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Step 2/x in moving the driver. Separate commits should make for easier
review.
Additional changes on top of code movement:
* Early-return success on input with zero-length to mac_update, to
avoid NULL pointers getting passed into the driver dispatch
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Step 1/x in moving the driver. Separate commits should make for easier
review.
Additional changes on top of just moving code:
* Added a sanity check on the key buffer size for CMAC.
* Transfered responsibility for resetting the core members of the
PSA MAC operation structure back to the core (from the driver
wrapper layer)
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
This is a temporary measure. Other operations in the PSA Core which rely
on this internal HMAC API should be rewritten to use the MAC API instead,
since they can then leverage accelerated HMAC should a platform provide
such acceleration support.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Since the loading attempt of a builtin key might be followed by trying
to load a persistent key, we can only wipe the allocated key data, not
the associated metadata.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
This reverts commit c75d9f589b.
This was merged by mistake in development instead of development_3.0.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Corresponds better to the validation done in other modules of PSA Crypto.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
As we want to do Mbed TLS aead operations as a
driver does, aead operations should not access
the key slot as key slots are not available to
drivers.
Second step in this PR: do not unlock the key slot
as part of operation abort.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
As we want to do Mbed TLS aead operations as a
driver does, aead operations should not access
the key slot as key slots are not available to
drivers.
First step in this PR: move key resolution from
aead operation setup to psa_aead_encrypt/decrypt
APIs.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When creating a persistent key or registering a key
with an invalid key identifier return
PSA_ERROR_INVALID_ARGUMENT instead of
PSA_ERROR_INVALID_HANDLE.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Remove cipher_generate_iv driver entry point as there
is no known use case to delegate this to a driver.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Symmetric key management is not intended to be
delegated to drivers. Thus, key management code
for a given symmetric key type should be included
in the library whether or not the support for
cryptographic operations based on that type of
symmetric key may be delegated to drivers.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Move members that are of no use to the PSA crypto core
to the Mbed TLS implementation specific operation context.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
For cipher multi-part operations, dispatch based on
the driver identifier even in the case of the
Mbed TLS software implementation (viewed as a driver).
Also use the driver identifier to check that an
cipher operation context is active or not.
This aligns the way hash and cipher multi-part
operations are dispatched.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Change the operation context to the PSA one to be
able to call the software implementation from
the driver wrapper later on.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Change the signature of
psa_driver_wrapper_cipher_encrypt/decrypt_setup to
that of a PSA driver cipher_encrypt/decrypt_setup
entry point.
Change the operation context to the PSA one to be
able to call the software implementation from
the driver wrapper later on.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Split out the cipher setup based on cipher.c
in psa_cipher_setup_internal() whose signature
is that of a PSA driver cipher_setup entry
point.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rework psa_cipher_setup in preparation of
calling the cipher setup based on cipher.c
through the interface of a PSA driver
cipher_setup entry point.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
To run succesfully the test
"PSA sign: invalid algorithm for ECC key" of
test_suite_psa_crypto when ECDSA support is not included
in the library, always return INVALID_ARGUMENT
in case of an ECC key not used for ECDSA, whether
ECDSA support is present or not.
Then apply the same logic to RSA sign RSA and RSA/ECC
verify for the sake of consistency.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add missing PSA_WANT_CCM/GCM/CMAC. This completes
the set of PSA_WANT config options given the
current support of PSA crypto in Mbed TLS.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
If an elliptic curve was enabled in the Mbed TLS classic API (#define
MBEDTLS_ECP_DP_xxx), but not enabled in the PSA configuration (#define
PSA_WANT_ECC_xxx), it would still work if you tried to use it through
PSA.
This is generally benign, but could be a security issue if you want to
disable a curve in PSA for some security reason (such as a known bug
in its implementation, which may not matter in the classic API if Mbed
TLS is running in a secure enclave and is only reachable from
untrusted callers through the PSA API). More urgently, this broke
test_suite_psa_crypto_not_supported.generated.
So if a curve is not enabled in the PSA configuration, ensure that
it's treated as unsupported through the PSA software implementation.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
`entropy_poll.h` is not supposed to be used by application code and
is therefore being made internal.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Revert changes introduced in 50518f4195
as it is now clear that these headers are internal without the
`*_internal.h` suffix.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Simple find and replace using `#include (<|")mbedtls/(.*)_internal.h(>|")`
and `#include $1$2_internal.h$3`.
Also re-generated visualc files by running
`scripts/generate_visualc_files.pl`.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Apparently there's a goal to make the PSA Crypto core free from
dynamic memory allocations. Therefore, all driver context structures
need to be known at compile time in order for the core to know their
final size.
This change defines & implements for hashing operations how the context
structures get defined.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
mac size is previously checked to not be less than 4, so it can't be zero
anymore at this point.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
When ECDSA is not supported by the library, prefer
to return NOT_SUPPORTED than INVALID_ARGUMENT when
asked for an ECDSA signature.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Move the check that ECDSA is supported from the
caller of the function responsible for Mbed TLS
ECDSA signatures to this function, namely
mbedtls_psa_ecdsa_sign_hash().
This makes the caller code more readable and is
more aligned with what is expected from a
sign_hash() PSA driver entry point.
Add a negative test case where a deterministic
ECDSA signature is requested while the library
does not support deterministic ECDSA.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
