Merge part of the RSA entries into this one, as I think it's easier for
users to have all similar changes in one place regardless of whether
they were introduce in the same PR or not.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Add two functions mbedtls_dhm_get_len() and mbedtls_dhm_get_bitlen() to
query the length of the modulus in bytes or bits.
Remove the len field: the cost of calling mbedtls_dhm_get_len() each time
it's needed is negligible, and this improves the abstraction of the DHM
module.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Mbed OS now provides POSIX-like time functions, although not alarm() nor
signal(). It is possible to implement MBEDTLS_TIMING_ALT on Mbed OS, so
we should not artificially prevent this in check-config. Remove the the
check that prevents implementing MBEDTLS_TIMING_ALT on Mbed OS.
Note that this limitation originally was added in the following commit,
although there isn't much context around why the restriction was
imposed: 63e7ebaaa1 ("Add material for generating yotta module"). In
2015, Mbed OS was quite a different thing: no RTOS, no threads, just an
asynchronous event loop model. I'd suppose the asynchronous event loop
model made it difficult before to implement MBEDTLS_TIMING_C on Mbed OS,
but that is no longer the case.
Fixes#4633
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
This change enables automatic detection and consumption of Mbed TLS
library targets from within other CMake projects. By generating an
`MbedTLSConfig.cmake` file, consuming projects receive a more complete
view of these targets, allowing them to be used as dependencies which
properly inherit the transitive dependencies of the libraries.
This is fairly fragile, as it seems Mbed TLS's libraries do not appear
to properly model their dependencies on other targets, including
third-party dependencies. It is, however, sufficient for building and
linking the compiled Mbed TLS libraries when there are no third-party
dependencies involved. Further work is needed for more complex
use-cases, but this will likely meet the needs of most projects.
Resolves#298. Probably useful for #2857.
Signed-off-by: Chris Kay <chris.kay@arm.com>
Calling mbedtls_mpi_cmp_int reveals the number of leading zero limbs
to an adversary who is capable of very fine-grained timing
measurements. This is very little information, but could be practical
with secp521r1 (1/512 chance of the leading limb being 0) if the
adversary can measure the precise timing of a large number of
signature operations.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
- Removing MBEDTLS_SSL_RECORD_CHECKING has nothing to do with TLS 1.0,
TLS 1.1 and DTLS 1.0. It has been included here as a consequence of an
unfortunate typo in the description of 4286. Actually, this macro was
removed independently and we already have a ChangeLog entry about it:
ChangeLog.d/issue4361.txt
- While at it, remove the word "deprecated": these macros and functions
had not been documented as deprecated in any version of the library
before being removed.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This commit fixes typos and re-words
the migration guide. It also adds
the issue number to the ChangeLog.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
On space-constrained platforms, it is a useful configuration to be able
to import/export and perform RSA key pair operations, but to exclude RSA
key generation, potentially saving flash space. It is not possible to
express this with the PSA_WANT_ configuration system at the present
time. However, in previous versions of Mbed TLS (v2.24.0 and earlier) it
was possible to configure a software PSA implementation which was
capable of making RSA signatures but not capable of generating RSA keys.
To do this, one unset MBEDTLS_GENPRIME.
Since the addition of MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR, this
expressivity was lost. Expressing that you wanted to work with RSA key
pairs forced you to include the ability to generate key pairs as well.
Change psa_crypto_rsa.c to only call mbedtls_rsa_gen_key() if
MBEDTLS_GENPRIME is also set. This restores the configuration behavior
present in Mbed TLS v2.24.0 and earlier versions.
It left as a future exercise to add the ability to PSA to be able to
express a desire for a software or accelerator configuration that
includes RSA key pair operations, like signature, but excludes key pair
generation.
Without this change, linker errors will occur when attempts to call,
which doesn't exist when MBEDTLS_GENPRIME is unset.
psa_crypto_rsa.c.obj: in function `rsa_generate_key':
psa_crypto_rsa.c:320: undefined reference to `mbedtls_rsa_gen_key'
Fixes#4512
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
Conflicts:
library/version_features.c
programs/test/query_config.c
Files were removed in development branch and modified by current branch.
Conflicts fixes by removing them.
The sequence of calls starts-update-starts-update-finish is not a
guaranteed valid way to abort an operation and start a new one. Our
software implementation just happens to support it, but alt
implementations may very well not support it.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Fix a pointer mismatch when int32_t is not int, for example on Cortex-M where
in32_t is long int. Fix#4530
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The output parameter of mbedtls_sha256_finish_ret and mbedtls_sha256_ret
now has a pointer type rather than array type. This removes spurious
warnings in some compilers when outputting a SHA-224 hash into a
28-byte buffer.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The output parameter of mbedtls_sha512_finish_ret and mbedtls_sha512_ret
now has a pointer type rather than array type. This removes spurious
warnings in some compilers when outputting a SHA-384 hash into a
48-byte buffer.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Building the library without entropy sources negates any and all security
provided by the library.
This option was originally requested a relatively long time ago and it
does not provide any tangible benefit for users any more.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
The sample program aescrypt2 shows bad practice: hand-rolled CBC
implementation, CBC+HMAC for AEAD, hand-rolled iterated SHA-2 for key
stretching, no algorithm agility. The new sample program pbcrypt does
the same thing, but better. So remove aescrypt2.
Fix#1906
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add implementation for MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS
Merging as it has been ready for four days now and I prefer not having to go through other rebases especially given the coming change of scope of development (3.0 rather than 2.2x).
The GCM interface now has separate functions to start the operation
and to pass the associated data.
This is in preparation for allowing the associated data to be passed
in chunks with repeatated calls to mbedtls_gcm_update_ad().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Alternative implementations of GCM may delay the output of partial
blocks from mbedtls_gcm_update(). Add an output length parameter to
mbedtls_gcm_update() to allow such implementations to delay the output
of partial blocks. With the software implementation, there is no such
delay.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Alternative implementations of GCM may delay the output of partial
blocks from mbedtls_gcm_update(). Add an output parameter to
mbedtls_gcm_finish() to allow such implementations to pass the final
partial block back to the caller. With the software implementation,
this final output is always empty.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This reverts commit 0961e3db49.
This was merged by mistake in development instead of development_3.0.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
An incorrect error code addition was spotted by the new invasive testing
infrastructure whereby pk_get_pk_alg will always return a high level
error or zero and pk_parse_key_pkcs8_unencrypted_der will try to add
another high level error, resulting in a garbage error code.
Apply the same fix from ae3741e8a to fix the bug.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
In a TLS client, enforce the Diffie-Hellman minimum parameter size
set with mbedtls_ssl_conf_dhm_min_bitlen() precisely. Before, the
minimum size was rounded down to the nearest multiple of 8.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Files available for use by alt implementations have been moved and renamed
so alt implementators should be told about the changes specific to them.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reword the changelog entry to tailor it for users of the library as
opposed to developers of the library.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Memsan build was reporting a false positive use of uninitialised memory
in x509_crt.c on a struct filled by an _stat function call. According to
the man pages, the element reported has to be filled in by the call, so
to be safe, and keep memsan happy, zero the struct first.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Fix function mbedtls_ecp_mul_shortcuts() to skip multiplication when m
is 0 and simply assignt 0 to R. Additionally fix ecjpake_zkp_read() to
return MBEDTLS_ERR_ECP_INVALID_KEY when the above condintion is met.
Fix#1792
Signed-off-by: TRodziewicz <rodziewicz@gmail.com>
Fix a stack buffer overflow with mbedtls_net_poll() and
mbedtls_net_recv_timeout() when given a file descriptor that is beyond
FD_SETSIZE. The bug was due to not checking that the file descriptor
is within the range of an fd_set object.
Fix#4169
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Although the library documentation does not guarantee that calling
mbedtls_entropy_free() twice works, it's a plausible assumption and it's
natural to write code that frees an object twice. While this is uncommon for
an entropy context, which is usually a global variable, it came up in our
own unit tests (random_twice tests in test_suite_random).
Announce this in the same changelog entry as for RSA because it's the same
bug in the two modules.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This brings them in line with PSA Crypto API 1.0.0
PSA_ALG_AEAD_WITH_DEFAULT_TAG_LENGTH -> PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG
PSA_ALG_AEAD_WITH_TAG_LENGTH -> PSA_ALG_AEAD_WITH_SHORTENED_TAG
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
In psa_generate_derived_key_internal() an error case was returning
directly rather than jumping to the exit label, which meant that an
allocated buffer would not be free'd.
Found via coverity.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Attempting to create an ECC key with a curve specification that is not
valid can plausibly fail with PSA_ERROR_INVALID_ARGUMENT ("this is not
a curve specification at all") or PSA_ERROR_NOT_SUPPORTED ("this may
be a curve specification, but not one I support"). The choice of error
is somewhat subjective.
Before this commit, due to happenstance in the implementation, an
attempt to use a curve that is declared in the PSA API but not
implemented in Mbed TLS returned PSA_ERROR_INVALID_ARGUMENT, whereas
an attempt to use a curve that Mbed TLS supports but for which support
was disabled at compile-time returned PSA_ERROR_NOT_SUPPORTED. This
inconsistency made it difficult to write negative tests that could
work whether the curve is implemented via Mbed TLS code or via a
driver.
After this commit, any attempt to use parameters that are not
recognized fails with NOT_SUPPORTED, whether a curve with the
specified size might plausibly exist or not, because "might plausibly
exist" is not something Mbed TLS can determine.
To keep returning INVALID_ARGUMENT when importing an ECC key with an
explicit "bits" attribute that is inconsistent with the size of the
key material, this commit changes the way mbedtls_ecc_group_of_psa()
works: it now works on a size in bits rather than bytes, with an extra
flag indicating whether the bit-size must be exact or not.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix a buffer overflow in mbedtls_mpi_sub_abs() when calculating
|A| - |B| where |B| is larger than |A| and has more limbs (so the
function should return MBEDTLS_ERR_MPI_NEGATIVE_VALUE).
Fix#4042
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_rsa_private() could return the sum of two RSA error codes
instead of a valid error code in some rare circumstances:
* If rsa_prepare_blinding() returned MBEDTLS_ERR_RSA_RNG_FAILED
(indicating a misbehaving or misconfigured RNG).
* If the comparison with the public value failed (typically indicating
a glitch attack).
Make sure not to add two high-level error codes.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Closing a wrapped key with the new SE driver interface while
MBEDTLS_PSA_CRYPTO_SE_C is also enabled leads to the key material not
being freed, even though an old SE driver is not in use, leading to a
memory leak. This is because a wrapped key is also considered external.
This commit extends the check for skipping by checking whether an
old-style SE driver is registered with the provided slot, in addition to
checking whether the key is external.
Signed-off-by: Fredrik Strupe <fredrik.strupe@silabs.com>
In order to remove large buffers from the stack, the der data is written
into the same buffer that the pem is eventually written into, however
although the pem data is zero terminated, there is now data left in the
buffer after the zero termination, which can cause
mbedtls_x509_crt_parse to fail to parse the same buffer if passed back
in. Patches also applied to mbedtls_pk_write_pubkey_pem, and
mbedtls_pk_write_key_pem, which use similar methods of writing der data
to the same buffer, and tests modified to hopefully catch any future
regression on this.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Extra whitespace and a missing newline at end of file was causing an error with
`check_files.py`.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
* development: (488 commits)
Fix removal of deprecated PSA constants
Use GitHub-compatible table formatting
Remove psa header files in uninstall part
Change function casting in `ssl_calc_finished_tls_sha384`
Fix GCC warning in `ssl_calc_finished_tls_sha384`
Add changelog entry file to `ChangeLog.d`
Fix GCC warning in `ssl_calc_finished_tls_sha384`
Fix GCC warning about `test_snprintf`
Fix mismatched function parameters (prototype/definition)
Fix build failure on gcc-11
Copyediting
Clarifications around key import
Fix copypasta
A variable is unused in some configurations
Rename test_driver_keygen to test_driver_key_management
Move "internal use" sentence attached to the wrong function
Added changelog
Plug in the entry point for public key export through driver
tests: psa: Reset key attributes where needed
Improve/fix documentation
...
Add missing tag check for algorithm parameters when comparing the
signature in the description part of the cert against the actual
signature whilst loading a certificate. This was found by a
certificate (created by fuzzing) that openssl would not verify, but
mbedtls would.
Regression test added (one of the client certs modified accordingly)
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
<string.h> is actually needed when MBEDTLS_ERROR_C is enabled and not
when only MBEDTLS_ERROR_STRERROR_DUMMY is enabled.
Fix#3866.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
* As described in issue #3801 the upcoming cmake 3.19
will not support cmake 2.6 any more
* This PR updates the mimimum required cmake version
to 2.8.12, which will not give a warning with cmake 3.19
but still compatible with MbedTLS support of RHEL/CentOS 7 LTS
* Adding ChangeLog.d/bugfix_PR3802.txt
Signed-off-by: Peter Toft <peter.toft@dirac.com>
In `read_next_b64_code()`, the result of fgetc() is stored into a char,
but later compared against EOF, which is generally -1. On platforms
where char is unsigned, this generates a compiler warning/error that the
comparison will never be true (causing a build failure). The value will
never match, with the function ultimately bailing with a "Too many bad
symbols are detected" error.
On platforms with signed char, EOF is detected, but a file containing a
0xFF character will causes a premature end of file exit of the loop.
Fix this by changing the result to an int.
Fixes#3794.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: David Brown <david.brown@linaro.org>
Allows required targets to have prefixes added to them, so that external
projects can avoid target names clashing.
Signed-off-by: Raef Coles <raef.coles@arm.com>
The CCM specification (NIST SP 800-38C) mandates that the formatting of
the additional data length l(a) changes when it is greater _or equal_ to
2^16 - 2^8 (>= 0xFF00). Since such lengths are not supported in mbed TLS,
the operation should fail in such cases.
This commit fixes an off-by-one error which allowed encryption/decryption
to be executed when l(a) was equal to 0xFF00, resulting in an
incorrect/non-standard length format being used.
Fixes#3719.
Signed-off-by: Fredrik Strupe <fredrik.strupe@silabs.com>
* Stores bits in psa_persistent_key_storage_format.
* psa_load_persistent_key_into_slot still imports plaintext keys which
ensures that the bits value gets set.
* Updates key specification to match new implementation.
* Expands persistent store and load tests with to check for bits
attribute.
* Removes bits storage from psa_se_key_data_storage_t.
Signed-off-by: Torstein Nesse <torstein.nesse@silabs.com>
This reverts commit 9c46a60e6c.
When the library is dynamically linked against Glibc (as is usually
the case with Glibc), it now requires a recent Glibc at runtime if it
was compiled with a recent Glibc. This is a loss of functionality for
no demonstrated benefit.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
“Prior to Mbed TLS 2.24” suggests that 2.24 itself didn't use the old
policy anymore, but it did. Change to “Until”, and also give the exact
version number “2.24.0”.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In psa_generate_key_internal() for ECC keys, remove the check that the
bit-size according to Mbed TLS is equal to the requested bit-size.
This check was necessary back when the PSA API encoded curves and key
sizes independently, in order to reject combinations such as SECP256R1
with a 512-bit size. Since the curve encoding changed to specifying a
curve family and a size separately, the Mbed TLS curve id (grp_id) and
the curve data (curve_info) are now determined from the size, and
checking that (curve_info->bit_size == bits) is now only a redundant
sanity check.
This check is actually buggy, because PSA Crypto and Mbed TLS don't
have exactly the same notion of key size. PSA thinks Curve25519 is
255-bit and secp224k1 is 225-bit, but Mbed TLS thinks they're 256-bit
and 224-bit respectively. Removing the check allows key generation to
work for these curves.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_ecp_curve_list() now lists Curve25519 and Curve448 under the names
"x25519" and "x448". These curves support ECDH but not ECDSA.
This was meant ever since the introduction of mbedtls_ecdsa_can_do()
in 0082f9df6f, but
2c69d10bac had removed the claim
that Montgomery curves support ECDH except through Everest.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
From now on, external contributions are no longer acknowledged in the
changelog file. They of course remain acknowledged in the Git history.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Starting with commit 49e94e3, the do/while loop in
`rsa_prepare_blinding()` was changed to a `do...while(0)`, which
prevents retry from being effective and leaves dead code.
Restore the while condition to retry, and lift the calls to finish the
computation out of the while loop by by observing that they are
performed only when `mbedtls_mpi_inv_mod()` returns zero.
Signed-off-by: Peter Kolbus <peter.kolbus@garmin.com>
Python should not be required for the build when the no_test target is
used. This commit adds the generated file to the source tree and the
check-generated-files script, and removes the generation from (c)make.
Fixes#3524
Signed-off-by: Cameron Nemo <cnemo@tutanota.com>
Remove the zeroization of a pointer variable in the AES block
functions. The code was valid but spurious and misleading since it
looked like a mistaken attempt to zeroize the pointed-to buffer.
Reported by Antonio de la Piedra, CEA Leti, France.
Note that we do not zeroize the buffer here because these are the
round keys, and they need to stay until all the blocks are processed.
They will be zeroized in mbedtls_aes_free().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Zeroising of local buffers and variables which are used for calculations in
mbedtls_internal_md*_process() and mbedtls_internal_ripemd160_process()
functions to erase sensitive data from memory.
Checked all function for possible missing zeroisation in MD.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Zeroising of local buffers and variables which are used for calculations in
mbedtls_pkcs5_pbkdf2_hmac() and mbedtls_internal_sha*_process() functions
to erase sensitive data from memory.
Checked all function for possible missing zeroisation in PKCS and SHA.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Minor updates to changelog for more concise wording and fixed styling
in other files as needed.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
* development:
Update copyright notices to use Linux Foundation guidance
Undef ASSERT before defining it to ensure that no previous definition has sneaked in through included files.
Add ChangeLog entry for X.509 CN-type vulnerability
Improve documentation of cn in x509_crt_verify()
Fix comparison between different name types
Add test: DNS names should not match IP addresses
Remove obsolete buildbot reference in compat.sh
Fix misuse of printf in shell script
Fix added proxy command when IPv6 is used
Simplify test syntax
Fix logic error in setting client port
ssl-opt.sh: include test name in log files
ssl-opt.sh: remove old buildbot-specific condition
ssl-opt.sh: add proxy to all DTLS tests
Signed-off-by: Dan Handley <dan.handley@arm.com>
mbedtls_md_setup() allocates a hash-specific context and then, if
requested, an extra HMAC context. If the second allocation failed, the
hash context was not freed.
Fix this by ensuring that the mbedtls_md_context_t object is always in
a consistent state, in particular, that the md_info field is always
set. For robustness, ensure that the object is in a consistent state
even on errors (other than BAD_INPUT_DATA if the object was not in a
consistent state on entry).
Fix#3486
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
As a result, the copyright of contributors other than Arm is now
acknowledged, and the years of publishing are no longer tracked in the
source files.
Also remove the now-redundant lines declaring that the files are part of
MbedTLS.
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find files
find '(' -path './.git' -o -path './3rdparty' ')' -prune -o -type f -print | xargs sed -bi '
# Replace copyright attribution line
s/Copyright.*Arm.*/Copyright The Mbed TLS Contributors/I
# Remove redundant declaration and the preceding line
$!N
/This file is part of Mbed TLS/Id
P
D
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
RFC5280 does not state that the `revocationDate` should be checked.
In addition, when no time source is available (i.e., when MBEDTLS_HAVE_TIME_DATE is not defined), `mbedtls_x509_time_is_past` always returns 0. This results in the CRL not being checked at all.
https://tools.ietf.org/html/rfc5280
Signed-off-by: Raoul Strackx <raoul.strackx@fortanix.com>
Description referred to mbedtls_ssl_sent_t callback,
but the callback is named mbedtls_ssl_send_t.
Signed-off-by: Christopher Moynihan <christophm@gmail.com>
* development: (55 commits)
Log change as bugfix
Add changelog entry
Clarify updates to the persistent state in storage
With multiple applicable transparent drivers, the order is unspecified
Minor clarifications
Give some examples of purpsoses of pure-software transparent driver
Fix typos
Add a link to the PSA API specification
Explain locations vs lifetimes
Initialize key pointer in ecdh to NULL
Add buffer zeroization when ecp_write_key fails
Simplified key slot deletion
Style fixes
Use arc4random_buf instead of rand on NetBSD
Apply review feedback
Update open question section about public key storage
Remove the paragraph about declaring application needs
Change driver persistent data to a callback interface
Rework and expand key management in opaque drivers
Fix typos and copypasta
...
PSA Crypto was checking the byte length of a to-be-imported public ECP key
against the expected length for Weierstrass keys, forgetting that
Curve25519/Curve448 exists.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
In the entries (mbedtls_x509_crl_entry values) on the list constructed
by mbedtls_x509_crl_parse_der(), set entry->raw.tag to
(SEQUENCE | CONSTRUCTED) rather than to the tag of the first ASN.1
element of the entry (which happens to be the tag of the serial
number, so INTEGER or INTEGER | CONTEXT_SPECIFIC). This is doesn't
really matter in practice (and in particular the value is never used
in Mbed TLS itself), and isn't documented, but at least it's
consistent with how mbedtls_x509_buf is normally used.
The primary importance of this change is that the old code tried to
access the tag of the first element of the entry even when the entry
happened to be empty. If the entry was empty and not followed by
anything else in the CRL, this could cause a read 1 byte after the end
of the buffer containing the CRL.
The test case "X509 CRL ASN1 (TBSCertList, single empty entry at end)"
hit the problematic buffer overflow, which is detected with ASan.
Credit to OSS-Fuzz for detecting the problem.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Address remaining PR comments for #2118
- Add ChangeLog.d/x509write_csr_heap_alloc.txt.
- Fix parameter alignment per Gille's recommendation.
- Update comments to more explicitly describe the manipulation of buf.
- Replace use of `MBEDTLS_MPI_MAX_SIZE` as `sig` buffer size for
call to `x509write_csr_der_internal()` with more intuitive
`MBEDTLS_PK_SIGNATURE_MAX_SIZE`.
- Update `mbedtls_x509write_csr_der()` to return
`MBEDTLS_ERR_X509_ALLOC_FAILED` on mbedtls_calloc error.
Signed-off-by: Simon Leet <simon.leet@microsoft.com>
Changed PSA core (and PKWrite) from reaching into MPI to using the proper
ecp function to fetch a private key.
Added changelog.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Executed scripts/assemble_changelog.py and manually fixed style where it
diverged from the instructions in ChangeLog.d/00README.md.
Manually added ChangeLog.d/bugfix_PR3405 which didn't have the .txt
extension as prescribed in ChangeLog.d/00README.md and deleted it
afterwards.
Signed-off-by: Janos Follath <janos.follath@arm.com>
* development: (87 commits)
entropy: Adjust parameter type of internal function to avoid a cast
entropy: Avoid arithmetic on void pointer
add comment about potential future extension
Adjust comments about SEED synchronisation
entropy: Rename sysctl_wrapper to sysctl_arnd_wrapper
test_suite_x509parse.function improvement
Pass "certificate policies" extension to callback
Update iv and len context pointers manually when reallocating buffers
Add Apache-2.0 headers to all source files
Remove Dangerous Parameter Passing
Add Apache-2.0 headers to all scripts
Add missing copyright dates to scripts and sources
Show failure in ssl-opts.sh when key export fails
Add changelog entry
tests: Reformating due to rnd_* renaming
tests: Add mbedtls_test_ prefix to rnd_* symbols
tests: Reformating due to hexcmp() renaming
tests: Add mbedtls_test_ prefix to hexcmp()
tests: Reformating due to unhexify_alloc() renaming
tests: Add mbedtls_test_ prefix to unhexify_alloc()
...
Pass the "certificate policies" extension to the callback supplied to
mbedtls_x509_crt_parse_der_with_ext_cb() if it contains unsupported
policies. This allows the callback to fully replicate the behaviour
of the deprecated MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
configuration.
Signed-off-by: Nicola Di Lieto <nicola.dilieto@gmail.com>
These fields might be shifted accordingly in `ssl_parse_record_header()`
when receiving a connection with CID, so they require a manual update
after calling the generic `mbedtls_ssl_reset_in_out_pointers()`.
This commit also adds a regression test which is run by all.sh.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
No effect so far, except on dependency checking, as the feature it's meant to
disable isn't implemented yet (so the descriptions in config.h and the
ChangeLog entry are anticipation for now).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This commit uses the previously defined macro to uniformize
bounds checks in several places. It also adds bounds checks to
the ClientHello writing function that were previously missing.
Also, the functions adding extensions to the ClientHello message
can now fail if the buffer is too small or a different error
condition occurs, and moreover they take an additional buffer
end parameter to free them from the assumption that one is
writing to the default output buffer.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Convert all text files to Unix line endings unless they're Windows
stuff.
Make sure that all text files have a trailing newline.
Remove whitespace at the end of lines.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
On dual world platforms, we want to run the PK module (pk.c) on the NS
side so TLS can use PSA APIs via the PK interface. PK currently has a
hard dependency on mbedtls_ecc_group_to_psa() which is declared in
crypto_extra.h, but only defined in psa_crypto.c, which is only built
for the S side.
Without this change, dual world platforms get error messages like the
following.
[Error] @0,0: L6218E: Undefined symbol mbedtls_ecc_group_to_psa (referred from BUILD/LPC55S69_NS/ARM/mbed-os/features/mbedtls/mbed-crypto/src/pk.o)
Make mbedtls_ecc_group_to_psa() inline within crypto_extra.h so that it
is available to both NS and S world code.
Fixes#3300
Signed-off-by: Darryl Green <darryl.green@arm.com>
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
ecp_double_add_mxz wrongly does an MPI addition followed by a call to
MOD_MUL instead of MOD_ADD. This is more visible since the
mbedtls_mpi_xxx_mod functions have been added in commit 3b3b34f608
("Replace some macros by functions").
Fix that by using mbedtls_mpi_add_mod instead. The testsuite still
passes after that change.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Instead of working with Markdown format, keep the classic Mbed TLS
ChangeLog format, with the classic category names. Keep the classic
file name as well. This way there's no risk of breaking third-party
scripts that may copy or even parse the changelog file.
Accordingly, expect ChangeLog/*.txt files instead of ChangeLog/*.md.
This commit completely rewrites the parsing and output code.
This commit systematically appends to the existing top version. A
subsequent commit will restore the capability of creating a new
version.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
assemble_changelog.py reads changelog entries from ChangeLog.d/*.md
and merges them into ChangeLog.md.
The changelog entries are merged into the first version in
ChangeLog.md. The script does not yet support creating a new version
in ChangeLog.md.
The changelog entries are merged in alphabetical order of the file
names. Future versions of this script are likely to adopt a different
order that reflects the git history of the entries.
