MBEDTLS_CMAC_C dependency is ivalid.
"PEM read (unknown encryption algorithm)" needs MBEDTLS_CIPHER_MODE_CBC dependency as
otherwise this test is failing in test_when_no_ciphersuites_have_mac configuration
because mbedtls_pem_read_buffer() returns a different error (MBEDTLS_ERR_PEM_FEATURE_UNAVAILABLE).
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
- Improve test descriptions
- Add more test cases with return value of 1
- Remove the mbedtls prefix from the test function
Signed-off-by: Janos Follath <janos.follath@arm.com>
MBEDTLS_SSL_IANA_TLS_GROUP_SECP192R1 and friends are not members of the mbedtls_ecp_group_id enum
Found by clang's -Wassign-enum
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
This is done to be able to bild test_psa_crypto_config_accel_hash component where MD5 is only available accelerated (PSA_WANT_ALG_MD5 is enabled and MBEDTLS_MD5_C is disabled) but MBEDTLS_USE_PSA_CRYPTO is disabled.
So the build should not attempt to enable pem_pbkdf1.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
Test cases added to check curve parameters and information for each
curve supported. Expected parameters are taken from references: SEC 2
for NIST, RFC 5639 for Brainpool, and RFC 7748 for curve25519/curve448.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
- Instead of macros, use direct calculations for array sizes
- Move variable declarations closer to first use
Signed-off-by: Janos Follath <janos.follath@arm.com>
Previously these tests depended on the definition from
inside the MD module, which in turn could be 32 or 64
bytes depending on whether MBEDTLS_SHA512_C was
defined. This is unnecessary, so a constant is itnroduced
instead.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Previously the whole .function file had a global dependency on
MBEDTLS_SHA1_C. This hasn't been correct for a long time:
- on principle, dependency declarations in .function files are for
compile-time dependencies;
- in practice, a number of test cases do not depend on SHA-1, as they only
use SHA-256 or SHA-512 - those cases should not be skipped in builds
without SHA-1;
- this was "taken advantage of" to skip dependency declarations for
test cases that only depended on SHA-1.
The previous commit removed the global dependency on SHA1_C; as a result
the test cases that actually depend on SHA-1 were not skipped in builds
without SHA-1. This commit fixes that by adding dependency declarations
where they belong: in the .data file.
All cases compute hashes using MD is available, or PSA otherwise; so
MD_OR_PSA is appropriate here.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
sed -i -f md_or_psa_hash.sed \
tests/suites/test_suite_pkcs1_v21.data
tests/suites/test_suite_pk.data
with md_or_psa_hash.sed containing:
s/MBEDTLS_MD5_C/MBEDTLS_HAS_ALG_MD5_VIA_MD_OR_PSA/g
s/MBEDTLS_RIPEMD160_C/MBEDTLS_HAS_ALG_RIPEMD160_VIA_MD_OR_PSA/g
s/MBEDTLS_SHA1_C/MBEDTLS_HAS_ALG_SHA_1_VIA_MD_OR_PSA/g
s/MBEDTLS_SHA224_C/MBEDTLS_HAS_ALG_SHA_224_VIA_MD_OR_PSA/g
s/MBEDTLS_SHA256_C/MBEDTLS_HAS_ALG_SHA_256_VIA_MD_OR_PSA/g
s/MBEDTLS_SHA384_C/MBEDTLS_HAS_ALG_SHA_384_VIA_MD_OR_PSA/g
s/MBEDTLS_SHA512_C/MBEDTLS_HAS_ALG_SHA_512_VIA_MD_OR_PSA/g
(The only lines in pk.data that still had old-style dependencies where
the ones about PKCS1_V21.)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Previously MD_C was auto-enabled based on the fact that ALG_RSA_PSS was
requested, but that's no longer the case since the previous commit.
We can fix this in one of two ways: either enable MD_C, or enable all
the PSA_WANT_ALG_SHA_xxx that are needed for test. Go for MD_C because
it's a single line and avoids having to enumerate a list that might grow
in the future.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Test coverage not there yet, as the entire test_suite_pkcs1_v21 is
skipped so far - dependencies to be adjusted in a future commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Internal macros are not present as symbols, visible or usable outside
the compilation unit and it is safe to allow them to have a name without
namespace prefix.
We also allow them to start with lower case letters as some of our
internal macros already have names like that.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Tests function with various ECP point conditions, covering freshly
initialized, zeroed, non-zero, and freed points.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
When USE_PSA_INIT() failed because lack of seedfile, mbedtls_x509write_csr_free()
crashed when called on an unitialized mbedtls_x509write_csr struct.
This moves mbedtls_x509write_csr_init before calling USE_PSA_INIT(),
which could probably fail, and uses the same flow in x509_csr_check()
and x509_csr_check_opaque().
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Adds python script for generation of bignum test cases, with initial
classes for mpi_cmp_mpi test cases. Build scripts are updated to
generate test data.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
Unfortunately reusing the new function from the signed constant time
comparison is not trivial.
One option would be to do temporary conditional swaps which would prevent
qualifying input to const. Another way would be to add an additional
flag for the sign and make it an integral part of the computation, which
would defeat the purpose of having an unsigned core comparison.
Going with two separate function for now and the signed version can be
retired/compiled out with the legacy API eventually.
The new function in theory could be placed into either
`library/constant_time.c` or `library/bignum_new.c`. Going with the
first as the other functions in the second are not constant time yet and
this distinction seems more valuable for new (as opposed to belonging to
the `_core` functions.
Signed-off-by: Janos Follath <janos.follath@arm.com>
- We don't check for NULL pointers this deep in the library
- Accessing a NULL pointer when the limb number is 0 as a mistake is the
very similar to any other out of bounds access
- We could potentially mandate at least 1 limb representation for 0 but
we either would need to enforce it or the implementation would be less
robust.
- Allowing zero limb representation - (NULL, 0) in particular - for zero
is present in the legacy interface, if we disallow it, the
compatibility code will need to deal with this (more code size and
opportunities for mistakes)
In summary, interpreting (NULL, 0) as the number zero in the core
interface is the least of the two evils.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The test case where there were extra limbs in the MPI failed and this
commit contains the corresponding fix as well. (We used to use the
minimum required limbs instead of the actual limbs present.)
Signed-off-by: Janos Follath <janos.follath@arm.com>
Test data which is compared as a hex string now uses upper case to
match output of mbedtls_mpi_write_string() output. This removes usage
of strcasecmp().
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
Cases where radix was explictly declared are removed in most cases,
replaced using script. bignum arguments are represented as hexadecimal
strings. This reduces clutter in test data and makes bit patterns
clearer.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
When USE_PSA is disabled and ECDSA_DETERMINISTIC is enabled, generating
ECDSA signatures via PK requires use of the hash via the MD layer (in
HMAC-DRBG, used by deterministic ECDSA).
When USE_PSA is enabled, ECDSA signatures via PK go through PSA which
always uses non-deterministic ECDSA, so does not rely on HMAC-DRBG/MD.
The condition used here is slightly too strong, but expressing exactly
the optimal condition seems more effort than it's worth for just 3 test
cases.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Allow PSK exchange mode on GnuTLS server for
NewSessionTicket message test as otherwise
the GnuTLS server does not send tickets.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Using VIA_MD_OR_PSA_BASED_ON_USE_PSA was justified by the fact that
until a few commits ago, the test functions here computed hashes using
either MD or PSA, depending on whether USE_PSA was defined (which itself
was justified by the loose reasoning that "PK is USE_PSA territory").
A few commits ago, test code stopped computing hashes because the hash
values became part of the test data. PK itself does not compute hashes.
As a result, VIA_MD_OR_PSA_BASED_ON_USE_PSA is no longer justified.
There are now two kinds of tests:
- those that only rely on hash data (ECDSA, RSA PKCS#1 v1.5) should
depend on VIA_LOWLEVEL_OR_PSA as that is the minimal dependency, hence
the one used for data
- those that were the layer below PK will internally compute a hash (RSA
PKCS#1 v2.1): currently this hash is always computed using MD (on which
MBEDTLS_PKCS1_V21 depends), so legacy dependencies like MBEDTLS_SHA256_C
should be used for now. The previous dependency was morally wrong, it
didn't show in the driver-only tests only because PKCS#1 v2.1 is
disabled in this test for now.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Fix usage with sed:
s/MBEDTLS_OR_PSA_WANT_\([A-Z_0-9]*\)/MBEDTLS_HAS_\1_VIA_LOWLEVEL_OR_PSA/
s/MBEDTLS_USE_PSA_WANT_\([A-Z_0-9]*\)/MBEDTLS_HAS_\1_VIA_MD_OR_PSA_BASED_ON_USE_PSA/
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
We had a message in the data file, and were computing its hash in the
test function. It is more efficient (and simpler when it comes to
dependencies) to directly have the message hash in the data file.
It was probably this way because some test vectors provide the message
for the sake of all-in-one implementation that hash-and-sign at once.
But our API gets a hash as the input and signs it. In unit tests, this
should be reflected in the signature of the test function, which should
take a hash as input.
The changes to the .data file were done using the following python
script:
import hashlib
suite = 'pkcs1_v21'
functions = {
'pkcs1_rsassa_pss_sign': (6, 8),
'pkcs1_rsassa_pss_verify': (4, 6),
'pkcs1_rsassa_pss_verify_ext': (4, 8),
}
def hash_ctx(s):
if s == 'MBEDTLS_MD_MD5':
return hashlib.md5()
if s == 'MBEDTLS_MD_SHA1':
return hashlib.sha1()
if s == 'MBEDTLS_MD_SHA224':
return hashlib.sha224()
if s == 'MBEDTLS_MD_SHA256':
return hashlib.sha256()
if s == 'MBEDTLS_MD_SHA384':
return hashlib.sha384()
if s == 'MBEDTLS_MD_SHA512':
return hashlib.sha512()
def fix(l):
parts = l.rstrip().split(":")
fun = parts[0]
if fun not in functions:
return l
(digest_idx, msg_idx) = functions[fun]
alg_str = parts[digest_idx]
if alg_str == "MBEDTLS_MD_NONE":
return l
h = hash_ctx(alg_str)
msg_str = parts[msg_idx]
msg_hex = msg_str[1:-1]
msg = bytes.fromhex(msg_hex)
h.update(msg)
msg_hash = h.hexdigest()
msg_hash_str = '"' + msg_hash + '"'
parts[msg_idx] = msg_hash_str
return ":".join(parts) + '\n'
filename = 'tests/suites/test_suite_' + suite + '.data'
with open(filename) as f:
lines = f.readlines()
lines = [fix(l) for l in lines]
with open(filename, 'w') as f:
f.writelines(lines)
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
We had a message in the data file, and were computing its hash in the
test function. It is more efficient (and simpler when it comes to
dependencies) to directly have the message hash in the data file.
It was probably this way because some test vectors provide the message
for the sake of all-in-one implementation that hash-and-sign at once.
But our API gets a hash as the input and signs it. In unit tests, this
should be reflected in the signature of the test function, which should
take a hash as input.
The changes to the .data file were done using the following python
script:
import hashlib
suite = 'ecdsa'
functions = {
'ecdsa_det_test_vectors': (3, 4),
'ecdsa_write_restart': (3, 4),
}
def hash_ctx(s):
if s == 'MBEDTLS_MD_MD5':
return hashlib.md5()
if s == 'MBEDTLS_MD_SHA1':
return hashlib.sha1()
if s == 'MBEDTLS_MD_SHA224':
return hashlib.sha224()
if s == 'MBEDTLS_MD_SHA256':
return hashlib.sha256()
if s == 'MBEDTLS_MD_SHA384':
return hashlib.sha384()
if s == 'MBEDTLS_MD_SHA512':
return hashlib.sha512()
def fix(l):
parts = l.rstrip().split(":")
fun = parts[0]
if fun not in functions:
return l
(alg_idx, msg_idx) = functions[fun]
alg_str = parts[alg_idx]
if alg_str == "MBEDTLS_MD_NONE":
return l
h = hash_ctx(alg_str)
msg_str = parts[msg_idx][1:-1]
h.update(msg_str.encode('ascii'))
msg_hash = h.hexdigest()
msg_hash_str = '"' + msg_hash.upper() + '"'
parts[msg_idx] = msg_hash_str
return ":".join(parts) + '\n'
filename = 'tests/suites/test_suite_' + suite + '.data'
with open(filename) as f:
lines = f.readlines()
lines = [fix(l) for l in lines]
with open(filename, 'w') as f:
f.writelines(lines)
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
This is mostly:
sed -i 's/mbedtls_psa_translate_md/mbedtls_hash_info_psa_from_md/' \
library/*.c tests/suites/*.function
This should be good for code size as the old inline function was used
from 10 translation units inside the library, so we have 10 copies at
least.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Using static inline functions is bad for code size; the function from
md_internal.h was already used from 3 different C files, so already was
copied at least 3 times in the library, and this would only get worse
over time.
Use actual functions, and also share the actual data between them.
Provide a consistent set of operations. Conversion to/from
human-readable string was omitted for now but could be added later if
needed.
In the future, this can be used to replace other similar (inline)
functions that are currently scattered, including (but perhaps not
limited to):
- mbedtls_psa_translate_md() from psa_util.h
- mbedtls_md_info_from_psa() (indirectly) from psa_crypto_hash.h
- get_md_alg_from_psa() from psa_crypto_rsa.c
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Same rationale as previous "Rm useless use of MD" commits.
Here the first two test functions were already not depending on MD_C,
but the new version is much simpler, as it avoids having two versions of
the code depending on the value of USE_PSA.
Changes to the data file generated with the following Python script:
import hashlib
suite = 'pk'
functions = {
'pk_rsa_verify_test_vec': (2, 1, True),
'pk_rsa_verify_ext_test_vec': (2, 1, True),
'pk_sign_verify_restart': (6, 7, False),
}
def hash_ctx(s):
if s == 'MBEDTLS_MD_MD5':
return hashlib.md5()
if s == 'MBEDTLS_MD_SHA1':
return hashlib.sha1()
if s == 'MBEDTLS_MD_SHA224':
return hashlib.sha224()
if s == 'MBEDTLS_MD_SHA256':
return hashlib.sha256()
if s == 'MBEDTLS_MD_SHA384':
return hashlib.sha384()
if s == 'MBEDTLS_MD_SHA512':
return hashlib.sha512()
if s == 'MBEDTLS_MD_RIPEMD160':
return hashlib.new("ripemd160")
def fix(l):
parts = l.rstrip().split(":")
fun = parts[0]
if fun not in functions:
return l
(alg_idx, msg_idx, is_hex) = functions[fun]
alg_str = parts[alg_idx]
if alg_str == "MBEDTLS_MD_NONE" or alg_str == "255":
return l
h = hash_ctx(alg_str)
msg_str = parts[msg_idx][1:-1]
msg = bytes.fromhex(msg_str) if is_hex else bytes(msg_str, 'ascii')
h.update(msg)
msg_hash = h.hexdigest()
msg_hash_str = '"' + msg_hash + '"'
parts[msg_idx] = msg_hash_str
return ":".join(parts) + '\n'
filename = 'tests/suites/test_suite_' + suite + '.data'
with open(filename) as f:
lines = f.readlines()
lines = [fix(l) for l in lines]
with open(filename, 'w') as f:
f.writelines(lines)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Tests are not here to demonstrate best practice, but to test a specific
part of the code. Using an RNG provided by the test framework also makes
the test code more focused on what we actually mean to test.
This brings the number of tests skipped in test_suite_rsa in
test_psa_crypto_config_accel_hash_use_psa down to 0 (from 50).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Probably the result of copy-pasting: the test functions actually don't
use those modules at all.
This brings the number of tests skipped in test_suite_rsa in
test_psa_crypto_config_accel_hash_use_psa down to 50 (from 61).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This brings the number of tests skipped in test_suite_rsa in
test_psa_crypto_config_accel_hash_use_psa down to 61 (from 117).
The changes to the test data file were generated with:
sed -i -f or_psa_hash.sed tests/suites/test_suite_rsa.data
with or_psa_hash.sed containing:
s/MBEDTLS_MD5_C/MBEDTLS_OR_PSA_WANT_ALG_MD5/g
s/MBEDTLS_RIPEMD160_C/MBEDTLS_OR_PSA_WANT_ALG_RIPEMD160/g
s/MBEDTLS_SHA1_C/MBEDTLS_OR_PSA_WANT_ALG_SHA_1/g
s/MBEDTLS_SHA224_C/MBEDTLS_OR_PSA_WANT_ALG_SHA_224/g
s/MBEDTLS_SHA256_C/MBEDTLS_OR_PSA_WANT_ALG_SHA_256/g
s/MBEDTLS_SHA384_C/MBEDTLS_OR_PSA_WANT_ALG_SHA_384/g
s/MBEDTLS_SHA512_C/MBEDTLS_OR_PSA_WANT_ALG_SHA_512/g
Here the MBEDTLS_OR_PSA_xxx macros are the right choice as we just need
data about the hashes to be available.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Same rationale as two commits ago.
Changes to the data file generated with the following script:
import hashlib
suite = 'rsa'
functions = {
'mbedtls_rsa_pkcs1_sign': (3, 1),
'mbedtls_rsa_pkcs1_verify': (3, 1),
}
def hash_ctx(s):
if s == 'MBEDTLS_MD_MD5':
return hashlib.md5()
if s == 'MBEDTLS_MD_SHA1':
return hashlib.sha1()
if s == 'MBEDTLS_MD_SHA224':
return hashlib.sha224()
if s == 'MBEDTLS_MD_SHA256':
return hashlib.sha256()
if s == 'MBEDTLS_MD_SHA384':
return hashlib.sha384()
if s == 'MBEDTLS_MD_SHA512':
return hashlib.sha512()
if s == 'MBEDTLS_MD_RIPEMD160':
return hashlib.new("ripemd160")
def fix(l):
parts = l.rstrip().split(":")
fun = parts[0]
if fun not in functions:
return l
(alg_idx, msg_idx) = functions[fun]
alg_str = parts[alg_idx]
if alg_str == "MBEDTLS_MD_NONE" or alg_str == "255":
return l
h = hash_ctx(alg_str)
msg_str = parts[msg_idx]
msg_hex = msg_str[1:-1]
msg = bytes.fromhex(msg_hex)
h.update(msg)
msg_hash = h.hexdigest()
msg_hash_str = '"' + msg_hash + '"'
parts[msg_idx] = msg_hash_str
return ":".join(parts) + '\n'
filename = 'tests/suites/test_suite_' + suite + '.data'
with open(filename) as f:
lines = f.readlines()
lines = [fix(l) for l in lines]
with open(filename, 'w') as f:
f.writelines(lines)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This brings the number of tests skipped in test_suite_pkcs1_v15 in
test_psa_crypto_config_accel_hash_use_psa to 0.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
We had a message in the data file, and were computing its hash in the
test function. It is more efficient (and simpler when it comes to
dependencies) to directly have the message hash in the data file.
It was probably this way because some test vectors provide the message
for the sake of all-in-one implementation that hash-and-sign at once.
But our API gets a hash as the input and signs it. In unit tests, this
should be reflected in the signature of the test function, which should
take a hash as input.
The changes to the .data file were done using the following python
script:
import hashlib
suite = 'pkcs1_v15'
functions = {
'pkcs1_rsassa_v15_sign': (10, 12),
'pkcs1_rsassa_v15_verify': (6, 8),
}
def hash_ctx(s):
if s == 'MBEDTLS_MD_MD5':
return hashlib.md5()
if s == 'MBEDTLS_MD_SHA1':
return hashlib.sha1()
if s == 'MBEDTLS_MD_SHA224':
return hashlib.sha224()
if s == 'MBEDTLS_MD_SHA256':
return hashlib.sha256()
if s == 'MBEDTLS_MD_SHA384':
return hashlib.sha384()
if s == 'MBEDTLS_MD_SHA512':
return hashlib.sha512()
def fix(l):
parts = l.rstrip().split(":")
fun = parts[0]
if fun not in functions:
return l
(alg_idx, msg_idx) = functions[fun]
alg_str = parts[alg_idx]
if alg_str == "MBEDTLS_MD_NONE":
return l
h = hash_ctx(alg_str)
msg_str = parts[msg_idx]
msg_hex = msg_str[1:-1]
msg = bytes.fromhex(msg_hex)
h.update(msg)
msg_hash = h.hexdigest()
msg_hash_str = '"' + msg_hash + '"'
parts[msg_idx] = msg_hash_str
return ":".join(parts) + '\n'
filename = 'tests/suites/test_suite_' + suite + '.data'
with open(filename) as f:
lines = f.readlines()
lines = [fix(l) for l in lines]
with open(filename, 'w') as f:
f.writelines(lines)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The test script all.sh contains the component
component_build_armcc
testing that Mbed TLS builds using Arm Compiler 5 and 6,
on a variety of platforms.
However, the component does not exercise inline assembly
for Arm, since
- MBEDTLS_HAVE_ASM is unset, and
- Some Arm inline assembly is only used if the level of
optimization is not 0.
This commit changes the test component to ensure that
inline assembly is built by setting MBEDTLS_HAVE_ASM
as well as enabling optimization level 1 (-O1).
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The encrypt/decrypt cases don't depend on actually computing a hash,
just on information about it being available, and this information is
guarded by MBEDTLS_OR_PSA_WANT_xxx.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Having the whole .function file depend on SHA-1 was wrong: dependencies
in .function files are for compile-time dependencies all functions in
this file build just fine without SHA-1. It's just some tests cases that
do need SHA-1 at runtime, use dependencies on those specific tests in
the .data file then.
This reduces the number of cases skipped in this test suite in
test_psa_crypto_config_accel_hash_use_psa from 28 (all of them) down to
12 (those that actually use SHA-1 as opposed to no hash).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
test_suite_pk still passes, with the same number of skipped tests as in
the default config minus PKCS#1v2.1
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Applied:
sed -i -f use_psa_hash.sed tests/suites/test_suite_pk.*
with use_psa_hash.sed as follows:
s/MBEDTLS_MD5_C/MBEDTLS_USE_PSA_WANT_ALG_MD5/g
s/MBEDTLS_RIPEMD160_C/MBEDTLS_USE_PSA_WANT_ALG_RIPEMD160/g
s/MBEDTLS_SHA1_C/MBEDTLS_USE_PSA_WANT_ALG_SHA_1/g
s/MBEDTLS_SHA224_C/MBEDTLS_USE_PSA_WANT_ALG_SHA_224/g
s/MBEDTLS_SHA256_C/MBEDTLS_USE_PSA_WANT_ALG_SHA_256/g
s/MBEDTLS_SHA384_C/MBEDTLS_USE_PSA_WANT_ALG_SHA_384/g
s/MBEDTLS_SHA512_C/MBEDTLS_USE_PSA_WANT_ALG_SHA_512/g
With this commit, test_suite_pk achieves parity between:
- crypto_full minus PKCS#1v2.1
- same minus MD (from all.sh's test_crypto_full_no_md)
and between:
- default config plus use_psa minus PKCS#1v2.1
- same with accelerators (test_psa_crypto_config_accel_hash_use_psa)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
While at it, also fix buffer size for functions that already depend on
USE_PSA: it should be PSA_HASH_MAX_SIZE for functions that always use
PSA, and the new macro MBEDTLS_USE_PSA_MD_MAX_SIZE for functions that
use it or not depending on USE_PSA.
The only case where MBEDTLS_MD_MAX_SIZE is OK is when the function
always uses MD - currently this is the case with
pk_sign_verify_restart() as it is incompatible with USE_PSA anyway.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Currently the test suites are passing because a lot of tests
functions/cases explicitly depend on SHAxxx_C, resulting in them being
skipped in this build. The goal of the next few commits is going to make
them pass and achieve test parity with a non-accelerated build for
selected modules.
Note: compared to the previous component, I'm using 'make tests' not
'make' (ie not building program) because I'm betting build failures
(some header not found) in programs which are not my interest atm.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
When MD is only used to compute a size, use md_internal.h instead.
When it's actually used to compute a hash, mark the test function as
depending on it. This is probably suboptimal in the long run, and we
might want to either adapt the code so that it can use PSA Crypto
instead, or just pre-compute the hash in the test data.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The parameters for init_handshake_options had changed on the development
branch after this test was created, so fixing up this test in order to
correct build failures after merge.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Force a bad session_id_len before handshake wrapup. This should
result in a forced jump to a clean up of a serialized session.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Add a platform function mbedtls_setbuf(), defaulting to setbuf().
The intent is to allow disabling stdio buffering when reading or writing
files with sensitive data, because this exposes the sensitive data to a
subsequent memory disclosure vulnerability.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Use escape mechanism defined in RFC 1779 when parsing commas and other
special characters in X509 DN values. Resolves failures when generating
a certificate with a CSR containing a comma in subject value.
Fixes#769.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
In Certificate message parsing tests with
invalid vector lengths, add checks that the
parsing failed on the expected overread check.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In "Authentication: client cert not trusted,
server required" ssl-opt.sh test, depending
on client and server execution speed, the
handshake on the client side may complete
successfully: the TLS connection is aborted
by the server because it is not able to
authenticate the client but at that time
the client may have completed the handshake
on its side. Thus, do not check that the
client handshake failed.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The other "Event-driven I/O" tests are not relevant
to TLS 1.3 yet: no ticket and session resumption
support.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The other "Non-blocking I/O" tests are not relevant
to TLS 1.3 yet: no ticket and session resumption
support.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Those are adaptations of the already existing
TLS 1.2 tests. It is not really possible to just
remove the TLS 1.2 dependency of the existing tests
because of the following:
. in TLS 1.3 the ciphersuite selection on server
side is not related to the server certificate
. for tests involving OpenSSL the OpenSSL command line
as to be adapted to TLS 1.3
. server authentication is mandatory in TLS 1.3
. a key with KeyEncipherment and not DigitalSignature
usage is never acceptable
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In asn1_write tests, when there's a parsing function corresponding to the
write function, call it and check that it can parse what we wrote.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Previously, the transforms were populated before extension
parsing, which resulted in the client rejecting a server
hello that contained a connection ID.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Test with the output buffer size up to *and including* the expected output
size plus one. `... < expected->len + 1` was evidently a mistake.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_asn1_write_mpi() correctly handles the sign bit, so there's no
reason not to test that it's handled correctly.
Fix copypasta in test data that was commented out.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix a null pointer dereference when performing some operations on zero
represented with 0 limbs: mbedtls_mpi_mod_int() dividing by 2, or
mbedtls_mpi_write_string() in base 2.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
That way the concerned tests are also run in the
TLS 1.3 only configuration where a TLS 1.3
handshake is performed.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The endpoint initialization function was setting up
a certificate but the client certificate was not
used because client authentication was not enabled
(not enabled in the default SSL server configuration).
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When executing eval in the background, the next "$!" gives the
eval PID, not the ssl-client2 pid. This causes problems when
a client times out and the script tries to kill it. Instead, it
kills the parent eval call.
This caused problems with subsequent proxy tests receiving
old packets from a client from a previous test.
Moving the "&" to inside the eval call fixes the problem.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Functions called within the test mean that MBEDTLS_X509_CRT_PARSE_C
is a test dependency and so is declared in this commit.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Move the definition of the accessor so that it is not defined
within the MBEDTLS_X509_CRT_WRITE_C guards. Thus remove the
dependency from the test and test cases.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Add two test cases for accessor test. One test where desired
ext type is presentent and the other of when the ext type is
not present.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Update to a branch with a fix for the test case
"expected error for psa_raw_key_agreement - Small buffer size"
since we just fixed the corresponding bug.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Systematically replace "TEST_ASSERT( $x <= $y )" by "TEST_LE_U( $x, $y )" in
test_suite_psa_crypto. In this file, all occurrences of this pattern are
size_t so unsigned.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test assertions for integer comparisons that display the compared values on
failure. Similar to TEST_EQUAL.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We want to check:
1. actual output <= PSA_RAW_KEY_AGREEMENT_OUTPUT_SIZE (the output fits
if the caller uses the key-specific buffer size macro)
2. actual output <= PSA_RAW_KEY_AGREEMENT_OUTPUT_MAX_SIZE (the output fits
if the caller uses the generic buffer size macro)
3. PSA_RAW_KEY_AGREEMENT_OUTPUT_SIZE <= PSA_RAW_KEY_AGREEMENT_OUTPUT_MAX_SIZE
(consistency in the calculation)
We were only testing (1) and (2). Test (3) as well. (1) and (3) together
imply (2) so there's no need to test (2).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remaining hits seem to be hex data, certificates,
and other miscellaneous exceptions.
List generated by running codespell -w -L
keypair,Keypair,KeyPair,keyPair,ciph,nd
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Remove no_supported HMAC generate/import tests when !PSA_KEY_TYPE_HMAC as HMAC key creation works regardless of PSA_WANT_KEY_TYPE_HMAC.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
Removes a case in mbedtls_asn1_named_data() where memcpy() could be
called with a null pointer and zero length. A test case is added for
this code path, to catch the undefined behavior when running tests with
UBSan.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
Adds two comments to clarify 1) why an offset is used
in the call to psa_aead_verify() and 2) why the test of
.hits_finish is always 0 in this test case.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
For multipart encrpytion, call psa_cipher_finish(). This is not actually
necessary for non-pathological implementations of ECB (the only currently
supported IV-less cipher algorithm) because it requires the input to be a
whole number of blocks and non-pathological implementations emit the output
block from update() as soon as an input block is available. But in principle
a driver could delay output and thus require a call to finish().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Validate the size macros directly from the output length in the test data,
rather than using the value returned by the library. This is equivalent
since the value returned by the library is checked to be identical.
Enforce that SIZE() <= MAX_SIZE(), in addition to length <= SIZE(). This is
stronger than the previous code which merely enforced length <= SIZE() and
length <= MAX_SIZE().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Motivated by CVE-2022-21449, to which we're not vulnerable, but we
didn't have a test for it. Now we do.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Remove cookie support from server side
Change code to align with coding styles
Re-order functions of client_hello
Change-Id: If31509ece402f8276e6cac37f261e0b166d05e18
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
This both simplifies parsing a little, and suppresses warnings. Suppressing
warnings is both good and bad: on the one hand it resolves problems such as
https://github.com/Mbed-TLS/mbedtls/issues/5731, on the other hand it may
hide clues as to why lsof wouldn't be working as expected.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
component_test_cmake_out_of_source was running the ssl-opt.sh test case
"Fallback SCSV: beginning of list", but this test case was removed in Mbed
TLS 3.0, so ssl-opt.sh was running nothing, which is not an effective test.
In 2.x, the test case was chosen because it uses an additional auxiliary
program tests/scripts/tcp_client.pl. This auxiliary program is no longer
used. So instead, run at least one test case that's sure to exist.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We test some configurations using drivers where the driver doesn't
support certain hash algorithms, but declares that it supports
compound algorithms that use those hashes. Until this is fixed,
in those configurations, don't try to actually perform operations.
The built-in implementation of asymmetric algorithms that use a
hash internally only dispatch to the internal md module, not to
PSA. Until this is supported, don't try to actually perform
operations when the operation is built-in and the hash isn't.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
`PSA_ALG_AEAD_WITH_SHORTENED_TAG(aead_alg, len) == aead_alg` when
`len == PSA_AEAD_TAG_LENGTH(aead_alg)`. So skip this case when testing
the printing of constants.
This fixes one test case due to the way arguments of
`PSA_ALG_AEAD_WITH_SHORTENED_TAG` are enumerated (all algorithms are tested
for a value of `len` which isn't problematic, and all values of `len` are
tested for one algorithm).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
There's nothing wrong with ECC keys on Brainpool curves,
but operations with them are very slow. So we only exercise them
with a single algorithm, not with all possible hashes. We do
exercise other curves with all algorithms so test coverage is
perfectly adequate like this.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
RSA-OAEP requires the key to be larger than a function of the hash size.
Ideally such combinations would be detected as a key/algorithm
incompatibility. However key/algorithm compatibility is currently tested
between the key type and the algorithm without considering the key size, and
this is inconvenient to change. So as a workaround, dispense
OAEP-with-too-small-hash from exercising, without including it in the
automatic operation-failure test generation.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't try to use {sign,verify}_message on algorithms that only support
{sign_verify}_hash. Normally exercise_key() tries all usage that is
supported by policy, however PSA_KEY_USAGE_{SIGN,VERIFY}_MESSAGE is implied
by PSA_KEY_USAGE_{SIGN,VERIFY}_HASH so it's impossible for the test data to
omit the _MESSAGE policies with hash-only algorithms.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't re-code the logic to determine a valid nonce length.
This fixes exercise_key() for PSA_ALG_CHACHA20_POLY1305, which was trying to
use a 16-byte nonce.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Support ECB, which has no IV. The code also now supports arbitrary IV
lengths based on the algorithm and key type.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In key read tests, add usage flags that are suitable for the key type and
algorithm. This way, the call to exercise_key() in the test not only checks
that exporting the key is possible, but also that operations on the key are
possible.
This triggers a number of failures in edge cases where the generator
generates combinations that are not valid, which will be fixed in subsequent
commits.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This currently makes all the descriptions unambiguous even when truncated at
66 characters, as the unit test framework does.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The output of generate_psa_tests.py is almost unchanged: the differences are
only spaces after commas (now consistently omitted).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When generating storage format tests, pass usage flags around as a list, and
format them as the last thing.
In Storagekey(), simplify the addition of implicit usage flags: this no
longer requires parsing.
The output is unchanged.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In the generated storage format test cases, cover all supported
algorithms for each key type. This is a step towards exercising
the key with all the algorithms it supports; a subsequent commit
will generate a policy that permits the specified algorithms.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Use the new generic is_public method.
Impact on generated cases: there are new HMAC test cases for SIGN_HASH. It
was a bug that these test cases were previously not generated.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
remove use of MBEDTLS_SSL_MINOR_VERSION_*
remove use of MBEDTLS_SSL_MAJOR_VERSION_*
(only remaining use is in tests/suites/test_suite_ssl.data)
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Store the TLS version in tls_version instead of major, minor version num
Note: existing application use which accesses the struct member
(using MBEDTLS_PRIVATE) is not compatible, as the struct is now smaller.
Reduce size of mbedtls_ssl_ciphersuite_t
members are defined using integral types instead of enums in
order to pack structure and reduce memory usage by internal
ciphersuite_definitions[]
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Store the TLS version in tls_version instead of major, minor version num
Note: existing application use which accesses the struct member
(using MBEDTLS_PRIVATE) is not compatible on little-endian platforms,
but is compatible on big-endian platforms. For systems supporting
only TLSv1.2, the underlying values are the same (=> 3).
New setter functions are more type-safe,
taking argument as enum mbedtls_ssl_protocol_version:
mbedtls_ssl_conf_max_tls_version()
mbedtls_ssl_conf_min_tls_version()
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Store the TLS version instead of minor version number in tls_version.
Note: struct member size changed from unsigned char to uint16_t
Due to standard structure padding, the structure size does not change
unless alignment is 1-byte (instead of 2-byte or more)
Note: existing application use which accesses the struct member
(using MBEDTLS_PRIVATE) is compatible on little-endian platforms,
but not compatible on big-endian platforms. The enum values for
the lower byte of MBEDTLS_SSL_VERSION_TLS1_2 and of
MBEDTLS_SSL_VERSION_TLS1_3 matches MBEDTLS_SSL_MINOR_VERSION_3 and
MBEDTLS_SSL_MINOR_VERSION_4, respectively.
Note: care has been taken to preserve serialized session format,
which uses only the lower byte of the TLS version.
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
`curves.pl` (invoked by `all.sh test_depends_curves`, and
`all.sh test_depends_curves_psa`) currently runs two series of tests:
* For each curve, test with only that curve enabled.
* For each curve, test with all curves but that one.
Originally this script was introduced to validate test dependencies, and for
that all-but-one gives better results because it handles test cases that
require multiple curves. Then we extended the script to also test with a
single curve, which matches many real-world setups and catches some product
bugs. Single-curve testing also validates test dependencies in a more
limited way.
Remove all-but-one curve testing, because it doesn't add much to the test
coverage. Mainly, this means that we now won't detect if a test case
declares two curve dependencies but actually also depends on a third. This
is an acceptable loss.
The trigger for removing all-but-one curve testing is that this will make
the job take only about half as long, and the length of the job was a bit of
a problem. Resolves#5729.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
component_test_CID_no_debug was added specifically to be a non-regression
test for https://github.com/Mbed-TLS/mbedtls/issues/3998. Running compat.sh
in the newly introduced config-ccm-psk-dtls1_2.h is also a non-regression
test for that bug. Therefore component_test_CID_no_debug is redundant for
its primary purpose.
Of course every configuration is different, but the additional coverage from
component_test_CID_no_debug is minimal, unlike config-ccm-psk-dtls1_2.h
which is a plausible real-world configuration.
In mbedtls-2.28, component_test_CID_no_debug was never added, and running
the unit tests in that configuration does not trigger the #3998 bug, only
compat.sh does. So, rather than backport component_test_CID_no_debug to
2.28.2, I am removing it from 3.2.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
