Declare all AES and DES functions that return int as needing to have
their result checked, and do check the result in our code.
A DES or AES block operation can fail in alternative implementations of
mbedtls_internal_aes_encrypt() (under MBEDTLS_AES_ENCRYPT_ALT),
mbedtls_internal_aes_decrypt() (under MBEDTLS_AES_DECRYPT_ALT),
mbedtls_des_crypt_ecb() (under MBEDTLS_DES_CRYPT_ECB_ALT),
mbedtls_des3_crypt_ecb() (under MBEDTLS_DES3_CRYPT_ECB_ALT).
A failure can happen if the accelerator peripheral is in a bad state.
Several block modes were not catching the error.
This commit does the following code changes, grouped together to avoid
having an intermediate commit where the build fails:
* Add MBEDTLS_CHECK_RETURN to all functions returning int in aes.h and des.h.
* Fix all places where this causes a GCC warning, indicating that our code
was not properly checking the result of an AES operation:
* In library code: on failure, goto exit and return ret.
* In pkey programs: goto exit.
* In the benchmark program: exit (not ideal since there's no error
message, but it's what the code currently does for failures).
* In test code: TEST_ASSERT.
* Changelog entry.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is no longer required, as both PolyChaCha and GCM now support
both chunked body data and additional data.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Also fiixed the following merge problems:
crypto_struct.h : Added MBEDTLS_PRIVATE to psa_aead_operation_s
members (merge conflict)
psa_crypto_aead.c : Added ciphertext_length to mbedtls_gcm_finish
call (change of API during development)
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Use the encoding from an upcoming version of the specification.
Add as much (or as little) testing as is currently present for Camellia.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Multipart decrypt now always expects positive result (i.e. the plaintext
that is passed in). Added new test that expects fail, and does no
multipart versions and concentrates on aead_verify.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Previous tests only tested when the expected lengths were set to zero.
New test sends all data/ad then goes over by one byte.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
i.e Check correct buffer size +1 and correct buffer size -1 (where
applicable) to check too big and too small cases, and hopefully catch
edge cases.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Ensure that the test actually does something, rather than skipping both
parts, also add comment to this effect.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Fix opaque key test vector dependency to PSA_CRYPTO_DRIVER_TEST
instead of MBEDTLS_PSA_CRYPTO_DRIVERS while validating with
test drivers.
Signed-off-by: Archana <archana.madhavan@silabs.com>
A minimal test driver extension is added to support
copy of opaque keys within the same location.
Test vector support is extended to cover opaque keys.
Signed-off-by: Archana <archana.madhavan@silabs.com>
-Add test driver support to import/export while wrapping keys
meant to be stored in the PSA core as opaque( emulating an
SE without storage ).
-Export validate_unstructured_key_bit_size as
psa_validate_unstructured_key_bit_size, thereby changing its scope.
-Improve the import/export test cases in test_suite_psa_crypto to also
cover opaque keys, thereby avoiding duplication.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Add tests for passing incomplete input data in
the first call and too much data in the second call.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
We previously had tests for not sending enough (additional) data, but
were missing tests for sending too much. I have added these to the state
tests, as I don't think this is complex enough to deserve a standalone
test.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Most supported ciphers have a 128-bit, 192-bit or 256-bit keys. List the
exceptions explicitly.
This commit fixes a test failure with the null cipher and an incorrect
comment that omitted several key lengths.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add functions to read the type, mode, name and key_bitlen fields from
mbedtls_cipher_info_t. These are the fields that applications are most
likely to care about.
TLS code also uses iv_size and block_size, which it might make sense to
expose, but most applications shouldn't need those, so I'm not exposing them
for now.
Call the new functions in unit tests, so they're at least smoke-tested.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Conflicts:
library/ccm.c
Conflict resolved by re-applying the MBEDTLS_BYTE_0 macro.
Conflict resolved by ignoring the MBEDTLS_PUT_UINT16_BE macro
used in development branch on the 'b' buffer, because the 'b'
buffer is removed in current branch.
The psa_open_key API depends on MBEDTLS_PSA_CRYPTO_STORAGE_C.
This is unnecessary for builtin keys and so is fixed.
Updated an open_fail test vector keeping with the same.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Add the missing nonce length checks (this function is being used by
oneshot functions as well as multipart, and thus all cipher suites are
being used) and cover the case where a NULL buffer gets passed in.
Extended the set nonce test to cover this.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Cover:
- not calling auth data update
- not calling cipher text update
- exceeding configured auth data length
- exceeding configured cipher text length
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Before `mbedtls_ssl_setup`, config functions should
be called. Without it, `mbedtls_ssl_setup` will raise
invalid value error.
Change-Id: I46fdaa5e8eb83d06c620087a9e1e7e14e1c5d9b5
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
Still check that encryption and decryption are inverse to each other
if the granularity does not match the one used in the KAT.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
This commit adds four known answer tests for TLS 1.3 record protection
from the following sources:
- RFC 8448 "Example Handshake Traces for TLS 1.3"
- tls13.ulfheim.net "The New Illustrated TLS Connection"
It extends the test coverage of the existing record protection tests
in the following ways:
- The existing record protection tests hand-craft record transform
structures; the new tests use the function
mbedtls_ssl_tls13_populate_transform()
from library source to create an TLS 1.3 transform from raw
key material and connection information.
- The existing record protection tests only check that encryption
and decryption are inverse to each other; as such, they don't
catch non-compliant implementations of encryption and decryption
which happen to be inverse to each other. By adding a known answer
test for TLS 1.3 record protection, can gain confidence that our
implementation is indeed standards-compliant.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Instances of `mbedtls_ssl_session` represent data enabling session resumption.
With the introduction of TLS 1.3, the format of this data changes. We therefore
need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish
1.2 and 1.3 sessions.
This commit introduces such a TLS-version field to mbedtls_ssl_session.
The change has a few ramifications:
- Session serialization/deserialization routines need to be adjusted.
This is achieved by adding the TLS-version after the header of
Mbed TLS version+config, and by having the subsequent structure
of the serialized data depend on the value of this field.
The details are described in terms of the RFC 8446 presentation language.
The 1.2 session (de)serialization are moved into static helper functions,
while the top-level session (de)serialization only parses the Mbed TLS
version+config header and the TLS-version field, and dispatches according
to the found version.
This way, it will be easy to add support for TLS 1.3 sessions in the future.
- Tests for session serialization need to be adjusted
- Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3,
we will need to have some logic comparing the TLS version of the proposed session
to the negotiated TLS version. For now, however, we only support TLS 1.2,
and no such logic is needed. Instead, we just store the TLS version in the
session structure at the same point when we populate mbedtls_ssl_context.minor_ver.
The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and
`mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved.
However, with both fields being private and explicitly marked so, this can happen
in a later change.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Previous test in state test was not actually making sure that the
operatioon could be completed using set lengths / set nonce in either
order, thus changed the 'normal' encrypt / decrypt tests to run in
alternating order.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Make all encrypt/decrypt tests use the same function. Cleanup arguments
that were poorly named and document internal function. Removed one test
as I didn't want to write another test purely for it, when its already
tested in one shot.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
