It no longer makes sense, either in -e or -f: those ciphersuites have
been removed anyway.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
- comments about (3)DES were inconsistent (one saying "keep 3DES" and
the other "exclude it")
- we don't have any DES or 3DES ciphersuite anyway, so no need to
exclude them or comment about it
- while at it, fix comment about ARIA: it's in the default config now
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The ciphers were originally separated by the version conditions, and the spacing
was retained in case it was required later. It has been decided it would be better
to have an unbroken list in alphabetically order to quickly locate ciphers when
necessary
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Remove ciphersuites that are no longer supported.
running ./test/compat.sh -e '^$' -p mbedtls no longer skips any tests
Fixes#4818
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
As anything below (D)TLS 1.2 is no longer supported, checks for the
minor version will always be true, and have therefore been removed
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Ensure that the nominal run works properly, so that it's apparent that the
injected failure is responsible for the failure of the handshake.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
USE_PSA_DONE() already checks that there are no used key slots.
The call to TEST_ASSERT() wouldn't have worked properly on failure anyway,
since it would jump back to the exit label.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
The timing module might include time.h on its own when on
a suitable platform, even if MBEDTLS_HAVE_TIME is disabled.
Co-authored-by: Tom Cosgrove <tom.cosgrove@arm.com>
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
mbedtls/mbedtls_config.h (formerly mbedtls/config.h) used to be included
directly in many places, so we wanted to test that all of these places
allowed the MBEDTLS_CONFIG_FILE override. Now mbedtls/mbedtls_config.h is
only included via build_info.h, so this is not relevant anymore.
It is no longer particularly useful to test MBEDTLS_CONFIG_FILE with the
full config, but it isn't harmful either, so keep it that way.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Similar to the previous commit, this commit removes
the word 'multi-part' from the encrypt setup tests.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
After other changes had taken place the call to
PSA_ASSERT( psa_get_key_attributes( key, &attributes ) )
was no longer needed.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Don't depend on the default sizes in the test programs: pass explicit
request and buffer sizes.
Don't depend on MAX_CONTENT_LEN (other than it not being extremely small:
this commit assumes that it will never be less than 101).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
For weistrass curves the pair is encoded as 0x04 || x || y.
Flipping one of the bits in the first byte should be a sure failure.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Force a bitflip in server key to make the raw key
agreement fail, and then verify that no key slots
are left open at the end. Use a Weierstrass curve
to have a high chance of failure upon encountering
such bitflip.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
This commit alters an ASSERT_COMPARE statement
at the end of the aead_encrypt_setup test. This is to
correct a mistake introduced by the preceding PR.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
This commit adds the required changes that arose from
the first round of reviewing. The total_input_data argument
has been removed and so the .data file needed to be edited
also.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Adds test data for the test case where the insufficient
memory error is forced on the driver status.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit adds test data for the case where the
algorithm is not supported by the driver but
the fallback option is available in the library.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
When running check-generated-files in update mode, all generated files were
regenerated. As a consequence,
```
tests/scripts/check-generated-files.sh -u && make
```
always caused most of the code to be rebuilt. Now, if a file hasn't changed,
preserve its original modification time (and other metadata), so the command
above doesn't rebuild anything that has actually not changed.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Otherwise the error status can be PSA_ERROR_INVALID_SIGNATURE instead of the
expected PSA_ERROR_NOT_SUPPORTED in some configurations. For example, the
RSA verification code currently checks the signature size first whenever
PSA_KEY_TYPE_RSA_PUBLIC_KEY is enabled, and only gets into
algorithm-specific code if this passes, so it returns INVALID_SIGNATURE even
if the specific algorithm is not supported.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
They're redundant with the automatically generated test cases, but it's
useful to have them when debugging issues with the test code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit adds tests data for the encrypt setup function
to cover the case where there is insufficent memory when
trying to undertake the operation.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit adds test data needed to test the case where driver
does not support selected algorithm but the library does.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
This commit adds a test called aead_encrypt_setup()
which tests that the relevant drivers get called the correct
amount of times when running the multipart AEAD encrypt
setup API.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
For TLS 1.3 tests, do not force TLS 1.3
version on client to play the negotiation
game whenever possible.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
To maximize the number of tests where MbedTLS
client proposes both TLS 1.2 and TLS 1.3 to
the server, force the TLS 1.2 version on the
server side rather than on the client side
in TLS 1.2 specific tests.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This implies that when both TLS 1.2 and TLS 1.3
are included in the build all the TLS 1.2 tests
using the default configuration now go through
a version negotiation on the client side.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rename ssl_cli.c and ssl_srv.c to reflect the fact
that they are TLS 1.2 specific now. Align there new
names with the TLS 1.3 ones.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add all of the group pairs for hrr cases
Re-order some parameters
Change-Id: Id7e131d1ed4279bbd586613800df7bd87dfa4c54
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
To be compatible with the other functions `mbedtls_psa_hkdf_extract` and
`mbedtls_psa_hkdf_expand` use hash algorithm for parameter.
Signed-off-by: Gabor Mezei <gabor.mezei@arm.com>
Change run title
Remove dedicate ciphersuite and sig alg
Update test cases
Change-Id: Ic0e9adf56062e744f7bafbc6bb562baeaafd89f0
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Integrate two options into one
Use one dedicate cipher suite TLS_AES_256_GCM_SHA384
Use on dedicate signature algorithm ecdsa_secp384r1_sha384
Change-Id: Icbe39b985e1942edc4b1e37ce3352eed4f316ab7
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Provide an additional pair of #defines, MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT
and MBEDTLS_SHA512_USE_A64_CRYPTO_ONLY. At most one of them may be
specified. If used, it is necessary to compile with -march=armv8.2-a+sha3.
The MBEDTLS_SHA512_PROCESS_ALT and MBEDTLS_SHA512_ALT mechanisms
continue to work, and are mutually exclusive with SHA512_USE_A64_CRYPTO.
There should be minimal code size impact if no A64_CRYPTO option is set.
The SHA-512 implementation was originally written by Simon Tatham for PuTTY,
under the MIT licence; dual-licensed as Apache 2 with his kind permission.
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
- parameter name in function description
- test_suite_ecp.data: add new line at the end of file
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
The test suite test_suite_psa_crypto_op_fail now runs a large number
of automatically generated test cases which attempt to perform a
one-shot operation or to set up a multi-part operation with invalid
parameters. The following cases are fully covered (based on the
enumeration of valid algorithms and key types):
* An algorithm is not supported.
* The key type is not compatible with the algorithm (for operations
that use a key).
* The algorithm is not compatible for the operation.
Some test functions allow the library to return PSA_ERROR_NOT_SUPPORTED
where the test code generator expects PSA_ERROR_INVALID_ARGUMENT or vice
versa. This may be refined in the future.
Some corner cases with algorithms combining a key agreement with a key
derivation are not handled properly. This will be fixed in follow-up
commits.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test that hash operation functions fail when given a hash algorithm
that is not supported or an algorithm that is not a hash.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The new test suite psa_crypto_op_fail is intended for systematically
generated test cases that ensure that cryptographic operations with
invalid parameters fail as expected. I intend invalid parameters to
cover things like an invalid algorithm, an algorithm that is
incompatible with the operation, a key type that is incompatible with
the algorithm, etc.
This commit just creates the infrastructure. Subsequent commits will
add data generation and test code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
CCM*-no-tag is currently available whenever CCM is, so declare
PSA_WANT_ALG_CCM_STAR_NO_TAG whenever PSA_WANT_ALG_CCM is declared and vice
versa.
Fix dependencies of test cases that use PSA_ALG_CCM_STAR_NO_TAG: some were
using PSA_WANT_ALG_CCM and some had altogether wrong dependencies.
This commit does not touch library code. There is still no provision for
providing CCM support without CCM*-no-tag or vice versa.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Generate "with implication" and "without implication" usage test cases
separately.
The set of generated test cases is unchanged. The order, and the description
of "with implication" test cases, changes.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Some DTLS reordering tests rely on certificate authentication messages. It
is probably possible to adapt them to rely on different messages, but for
now, skip them in PSK-only builds.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
If MBEDTLS_SSL_EXTENDED_MASTER_SECRET is disabled or the feature is disabled
at runtime, and if client authentication is not used, then calc_verify is not
called, so don't require the corresponding debug trace.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The message was removed in 6be9cf542f without
a replacement. A failure would cause the test case to fail anyway, so this
negative check is not really useful.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When doing builds with PSA enabled or with debug traces enabled, convey this
in $MBEDTLS_TEST_CONFIGURATION and in the terminal logs.
This fixes a bug that the outcome file did not distinguish entries from
test cases run in a reference configuration with or without PSA.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
User-visible changes:
* With no argument, configurations are now tested in a deterministic order.
* When given arguments, configurations are now tested in the order given.
* When given arguments, if the same configuration is passed multiple times,
it will now be tested multiple times.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The PSA Crypto API uses 0 as the initial counter value, but the test vector
in RFC 7539 uses 1. So the unit tests here include an extra leading block.
The expected data for this leading block was calculated with Cryptodome.
#!/usr/bin/env python3
import re
from Cryptodome.Cipher import ChaCha20
key = bytes.fromhex('000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f')
nonce = bytes.fromhex('000000000000004a00000000')
encrypt = lambda pt: ChaCha20.new(key=key, nonce=nonce).encrypt(pt)
# Cryptodome uses counter=0, like PSA Crypto. Prepend a 64-byte input block #0
# so that the plaintext from RFC 7539 starts exactly at block #1.
header = b'The RFC 7539 test vector uses counter=1, but PSA uses counter=0.'
assert(len(header) == 64)
sunscreen = b"Ladies and Gentlemen of the class of '99: If I could offer you only one tip for the future, sunscreen would be it."
plaintext = header + sunscreen
zeros = b'\x00' * len(plaintext)
keystream = encrypt(zeros)
ciphertext = encrypt(plaintext)
print('RFC 7539 §2.4.2')
print('Keystream:')
print(re.sub(r'(..)', r'\1:', keystream[64:].hex()))
print('Ciphertext Subscreen:')
print(re.sub(r'(..)', r'\1 ', ciphertext[64:].hex()))
print('')
print(f"""\
PSA symmetric decrypt: ChaCha20, RFC7539 keystream
depends_on:PSA_WANT_ALG_STREAM_CIPHER:PSA_WANT_KEY_TYPE_CHACHA20
# Keystream from RFC 7539 §2.4.2, with an extra 64-byte output block prepended
# because the test vector starts at counter=1 but our API starts at counter=0.
cipher_decrypt:PSA_ALG_STREAM_CIPHER:PSA_KEY_TYPE_CHACHA20:"{key.hex()}":"{nonce.hex()}":"{zeros.hex()}":"{keystream.hex()}"
PSA symmetric decrypt: ChaCha20, RFC7539 sunscreen
depends_on:PSA_WANT_ALG_STREAM_CIPHER:PSA_WANT_KEY_TYPE_CHACHA20
# Test vector from RFC 7539 §2.4.2, with an extra 64-byte block prepended
# because the test vector starts at counter=1 but our API starts at counter=0.
cipher_decrypt:PSA_ALG_STREAM_CIPHER:PSA_KEY_TYPE_CHACHA20:"{key.hex()}":"{nonce.hex()}":"{ciphertext.hex()}":"{plaintext.hex()}"
""")
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
* Remove expected_output_data: since asymmetric encryption is randomized,
it can't be useful.
* The decryption check needs the private exponent, not the public exponent.
* Use PSA macro for the expected ciphertext buffer size.
* Move RSA sanity checks to their own function for clarity.
* For RSAES-PKCS1-v1_5, check that the result of the private key operation
has the form 0x00 0x02 ... 0x00 M where M is the plaintext.
* For OAEP, check that the result of the private key operation starts with
0x00. The rest is the result of masking which it would be possible to
check here, but not worth the trouble of implementing.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add a call to `mbedtls_md_starts()` in the `mbedtls_md_process()`
test, as it violates the API usage. Fixes#2227.
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
To be able to test utility programs for an absence of time.h, we need a
baremetal config that is not crypto only. Add one.
Signed-off-by: Daniel Axtens <dja@axtens.net>
baremetal compiles should not include time.h, as MBEDTLS_HAVE_TIME is
undefined. To test this, provide an overriding include directory that
has a time.h which throws a meaningful error if included.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Make it safe to import the config multiple times without having
multiple definition errors.
(This prevents errors in the fuzzers in a later patch.)
Signed-off-by: Daniel Axtens <dja@axtens.net>
The X509write x509_csr_check reference file depends on
mbedtls_test_rnd_pseudo_rand being used to match the pre-generated data.
This calls x509_crt_verifycsr() like in x509_csr_check_opaque() when
MBEDTLS_USE_PSA_CRYPTO is defined.
Notably using PSA_ALG_DETERMINISTIC_ECDSA() in ecdsa_sign_wrap() makes
this test run without these changes.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
The pk_rsa_encrypt_test_vec() reference vector is calculated while using
mbedtls_test_rnd_pseudo_rand rng source, but since the RNG souce can't
be controlled when USE_PSA_CRYPTO is enabled we can't get the same
result.
The pk_rsa_encrypt_test_vec() fails when switching to mbedtls_test_rnd_std_rand
as rng source.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
