New name MBEDTLS_ERR_SSL_BAD_CERTIFICATE
Also, replace some instances of MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE
by MBEDTLS_ERR_SSL_DECODE_ERROR and MBEDTLS_ERR_SSL_ILLEGAL_PARAMETER
as fit.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
For TLS, secp256k1 is deprecated by RFC 8422 §5.1.1. For X.509,
secp256k1 is not deprecated, but it isn't used in practice, especially
in the context of TLS where there isn't much point in having an X.509
certificate which most peers do not support. So remove it from the
default profile. We can add it back later if there is demand.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
TLS used to prefer larger curves, under the idea that a larger curve has a
higher security strength and is therefore harder to attack. However, brute
force attacks are not a practical concern, so this was not particularly
meaningful. If a curve is considered secure enough to be allowed, then we
might as well use it.
So order curves by resource usage. The exact definition of what this means
is purposefully left open. It may include criteria such as performance and
memory usage. Risk of side channels could be a factor as well, although it
didn't affect the current choice.
The current list happens to exactly correspond to the numbers reported by
one run of the benchmark program for "full handshake/s" on my machine.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Upgrade the default list of hashes and curves allowed for TLS. The list is
now aligned with X.509 certificate verification: hashes and curves with at
least 255 bits (Curve25519 included), and RSA 2048 and above.
Remove MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE which would no
longer do anything.
Document more precisely what is allowed by default.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Removes conditional code compilation blocks
and code paths relating to the
MBEDTLS_SSL_TRUNCATED_HMAC config option.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
mbedtls_dhm_get_value can be seen as either a copy function or a getter
function. Given the name and the semantics, it's more of a getter, even if
it "gets" by doing a copy. Therefore, put the context first, and the
selector next, leaving the output for last.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit removes the API
```
mbedtls_ssl_conf_ciphersuites_for_version()
```
which allows to configure lists of acceptable ciphersuites
for each supported version of SSL/TLS: SSL3, TLS 1.{0,1,2}.
With Mbed TLS 3.0, support for SSL3, TLS 1.0 and TLS 1.1
is dropped. Moreover, upcoming TLS 1.3 support has a different
notion of cipher suite and will require a different API.
This means that it's only for TLS 1.2 that we require
a ciphersuite configuration API, and
```
mbedtls_ssl_conf_ciphersuites()
```
can be used for that. The version-specific ciphersuite
configuration API `mbedtls_ssl_conf_ciphersuites_for_version()`,
in turn, is no longer needed.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Conflicts:
library/version_features.c
programs/test/query_config.c
Files were removed in development branch and modified by current branch.
Conflicts fixes by removing them.
Conflicts:
* configs/config-psa-crypto.h: modified here, removed in development
* tests/suites/test_suite_x509parse.data: all conflicts are in depends_on
lines where development made a change unrelated to MBEDTLS_SHAxxx and our
branch either changed `MBEDTLS_SHA256_C` to `MBEDTLS_SHA224_C` or
`MBEDTLS_SHA512_C:!MBEDTLS_SHA512_NO_SHA384` to ``MBEDTLS_SHA384_C`, with
no change to what the test does. Pick the other branch's dependency
changes then apply our SHA dpeendency change.
mbedtls_ssl_{get,set}_session() exhibited idempotent behaviour
in Mbed TLS 2.x. Multiple calls to those functions are not useful
in TLS 1.2, and the idempotent nature is unsuitable for support of
TLS 1.3 which introduces the availabilty to offer multiple tickets
for resumption, as well as receive multiple tickets.
In preparation for TLS 1.3 support, this commit relaxes the semantics
of `mbedtls_ssl_{get,set}_session()` by allowing implementations to
fail gracefully, and leveraging this freedom by modifying the
existing TLS 1.2 implementation to only accept one call to
`mbedtls_ssl_{get,set}_session()` per context, and non-fatally
failing all subsequent invocations.
For TLS 1.3, it will be leveraged by making multiple calls to
`mbedtls_ssl_get_session()` issue one ticket a time until no more
tickets are available, and by using multiple calls to
`mbedtls_ssl_set_session()` to allow the client to offer multiple
tickets to the server.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Remove a kludge to avoid a warning in GCC 11 when calling
mbedtls_sha512_finish_ret with a 48-byte output buffer. This is correct
since we're calculating SHA-384. When mbedtls_sha512_finish_ret's output
parameter was declared as a 64-byte array, GCC 11 -Wstringop-overflow
emitted a well-meaning, but inaccurate buffer overflow warning, which we
tried to work around (successfully with beta releases but unsuccessfully
with GCC 11.1.0 as released). Now that the output parameter is declared as a
pointer, no workaround is necessary.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The server-side `Certificate` handshake message writer checks
whether a certificate is present, and if not fails with:
```
MBEDTLS_ERR_SSL_CERTIFICATE_REQUIRED
```
This should never happen, since the library checks the presence
of a suitable certificate before picking a ciphersuite. It is
therefore more suitable to convert this check into an assertion,
and fail with MBEDTLS_ERR_SSL_INTERNAL_ERROR upon failure.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The error code MBEDTLS_ERR_SSL_INVALID_VERIFY_HASH is only
returned from the internal function
```
mbedtls_ssl_set_calc_verify_md()
```
Moreover, at every call-site of this function, it is only
checked whether the return value is 0 or not, while the
exact return value is irrelevant.
The behavior the library is therefore unchanged if we return 1
instead of MBEDTLS_ERR_SSL_INVALID_VERIFY_HASH in
`mbedtls_ssl_set_calc_verify_md()`. This commit makes this change.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
This error is used when the output buffer isn't large enough
to hold our own certificate.
In the interest of cleaning up the error space for 3.0, this commit
removes MBEDTLS_ERR_SSL_CERTIFICATE_TOO_LARGE and replaces its single
use by MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Although SHA512 is currently required to enable SHA384, this
is expected to change in the future. This commit is an
intermediate step towards fully separating SHA384 and SHA512.
check_config is the only module which enforces that SHA512 is
enabled together with SHA384.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
MinGW and older windows compilers cannot cope with %zu or %lld (there is
a workaround for MinGW, but it involves linking more code, there is no
workaround for Windows compilers prior to 2013). Attempt to work around
this by defining printf specifiers for size_t per platform for the
compilers that cannot use the C99 specifiers.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Fixes for printf format specifiers, where they have been flagged as
invalid sizes by coverity, and new build flags to enable catching these
errors when building using CMake. Note that this patch uses %zu, which
requires C99 or later.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Simple find and replace using `#include (<|")mbedtls/(.*)_internal.h(>|")`
and `#include $1$2_internal.h$3`.
Also re-generated visualc files by running
`scripts/generate_visualc_files.pl`.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
`finish_sha384_t` was made more generic by using `unsigned char*`
instead of `unsigned char[48]` as the second parameter.
This change tries to make the function casting more robust against
future improvements of gcc analysis.
Signed-off-by: Rodrigo Dias Correa <rodrigo@correas.us>
This commit fixes the same warning fixed by baeedbf9, but without
wasting RAM. By casting `mbedtls_sha512_finish_ret()`, `padbuf`
could be kept 48 bytes long without triggering any warnings.
Signed-off-by: Rodrigo Dias Correa <rodrigo@correas.us>
GCC 11 generated a warning because `padbuf` was too small to be
used as an argument for `mbedtls_sha512_finish_ret`. The `output`
parameter of `mbedtls_sha512_finish_ret` has the type
`unsigned char[64]`, but `padbuf` was only 48 bytes long.
Even though `ssl_calc_finished_tls_sha384` uses only 48 bytes for
the hash output, the size of `padbuf` was increased to 64 bytes.
Signed-off-by: Rodrigo Dias Correa <rodrigo@correas.us>
In GCC 11, parameters declared as arrays in function prototypes
cannot be declared as pointers in the function definition. The
same is true for the other way around.
The definition of `mbedtls_aes_cmac_prf_128` was changed to match
its public prototype in `cmac.h`. The type `output` was
`unsigned char *`, now is `unsigned char [16]`.
In `ssl_tls.c`, all the `ssl_calc_verify_*` variants now use pointers
for the output `hash` parameter. The array parameters were removed
because those functions must be compatible with the function pointer
`calc_verify` (defined in `ssl_internal.h`).
Signed-off-by: Rodrigo Dias Correa <rodrigo@correas.us>
Move all the PSA crypto APIs using key handles
to use key identifiers but psa_key_open() and
psa_key_close(). This is done without modifying
any test as key handles and key identifiers are
now the same.
Update the library modules using PSA crypto APIs
to get rid of key handles.
Programs and unit tests are updated to not use
key handles in subsequent commits, not in this
one.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Use the export keys functionality, to call the public API
`mbedtls_ssl_tls_prf()`, and remove the function
`mbedtls_ssl_get_dtls_srtp_key_material()`.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
1. Check allocation success.
2. Check parameter correctness in the use_srtp extension
in server and client.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
Improve readability of the code:
1. move common code to `ssl_internal.h` as `static inline`.
2. Add comments.
3. Use local variables for extension size.
4. Change function signature, by adding buffer size and output length.
5. Take server srtp profile out of the loop.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
1. Add DTLS-SRTP tests in `ssl-opts.sh`
2. Add logs for the tests to filter.
3. Add function to get the profile informations.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
Set authmode to `MBEDTLS_SSL_VERIFY_REQUIRED` when using dtls-srtp,
in case authmode was not set. This is to support self signed certificates
received by the server, which is the case with webRTC. Certificate fingerprints
are verified outside the dtls stack, as defined in RFC 5763.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
Enforce CertificateRequest, client and server Certificates, and
CertificateVerify messages, which are mandatory in DTLS-SRTP,
as defined in RFC 5764 section 4.1
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
Make the key material length in mbedtls_ssl_get_dtls_srtp_key_material
to be in\out, like it is done all over the library
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
1. Add check for prerequisites in check_config.h
2. Add mki value to use_srtp extension
3. address some review comments
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
Mbed TLS requires users of DTLS to configure timer callbacks
needed to implement the wait-and-retransmit logic of DTLS.
Previously, the presence of these timer callbacks was checked
at every invocation of `mbedtls_ssl_fetch_input()`, so lowest
layer of the messaging stack interfacing with the underlying
transport.
This commit removes this recurring check and instead checks the
presence of timers once at the beginning of the handshake.
The main rationale for this change is that it is a step towards
separating the various layers of the messaging stack more cleanly:
datagram layer, record layer, message layer, retransmission layer.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
As a result, the copyright of contributors other than Arm is now
acknowledged, and the years of publishing are no longer tracked in the
source files.
Also remove the now-redundant lines declaring that the files are part of
MbedTLS.
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find files
find '(' -path './.git' -o -path './3rdparty' ')' -prune -o -type f -print | xargs sed -bi '
# Replace copyright attribution line
s/Copyright.*Arm.*/Copyright The Mbed TLS Contributors/I
# Remove redundant declaration and the preceding line
$!N
/This file is part of Mbed TLS/Id
P
D
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
In library source files, include "common.h", which takes care of
including "mbedtls/config.h" (or the alternative MBEDTLS_CONFIG_FILE)
and other things that are used throughout the library.
FROM=$'#if !defined(MBEDTLS_CONFIG_FILE)\n#include "mbedtls/config.h"\n#else\n#include MBEDTLS_CONFIG_FILE\n#endif' perl -i -0777 -pe 's~\Q$ENV{FROM}~#include "common.h"~' library/*.c 3rdparty/*/library/*.c scripts/data_files/error.fmt scripts/data_files/version_features.fmt
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
These fields might be shifted accordingly in `ssl_parse_record_header()`
when receiving a connection with CID, so they require a manual update
after calling the generic `mbedtls_ssl_reset_in_out_pointers()`.
This commit also adds a regression test which is run by all.sh.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
This commit introduces two changes:
- Add in_msg and out_msg calculations for buffer upsizing. This was previously
considered as unnecessary, but renegotiation using certain ciphersuites needs
this.
- Improving the way out_msg and in_msg pointers are calculated, so that even
if no resizing is introduced, the pointers remain the same;
New tests added:
- various renegotiation schemes with a range of MFL's and ciphersuites;
- an ssl-opt.sh test exercising two things that were problematic: renegotiation
with TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8 and a server MFL that's smaller
than the one negotiated by the client.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Since the server might want to have a different maximum fragment length
for the outgoing messages than the negotiated one - introduce a new way of
computing it. This commit also adds additional ssl-opt.sh tests ensuring
that the maximum fragment lengths are set as expected.
mbedtls_ssl_get_max_frag_len() is now a deprecated function,
being an alias to mbedtls_ssl_get_output_max_frag_len(). The behaviour
of this function is the same as before.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Merge the latest state of the target branch (mbedtls/development) into the
pull request to merge mbed-crypto into mbedtls.
Conflicts:
* ChangeLog: add/add conflict. Resolve by using the usual section order.
Rename identifiers containing double-underscore (`__`) to avoid `__`.
The reason to avoid double-underscore is that all identifiers
containing double-underscore are reserved in C++. Rename all such
identifiers that appear in any public header, including ssl_internal.h
which is in principle private but in practice is installed with the
public headers.
This commit makes check-names.sh pass.
```
perl -i -pe 's/\bMBEDTLS_SSL__ECP_RESTARTABLE\b/MBEDTLS_SSL_ECP_RESTARTABLE_ENABLED/g; s/\bMBEDTLS_KEY_EXCHANGE_(_\w+)_(_\w+)\b/MBEDTLS_KEY_EXCHANGE${1}${2}/g' include/mbedtls/*.h library/*.c programs/*/*.c scripts/data_files/rename-1.3-2.0.txt tests/suites/*.function
```
Add a conditional buffer resizing feature. Introduce tests exercising
it in various setups (serialization, renegotiation, mfl manipulations).
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
This commit is the final step in separating the functionality of
what was originally ssl_tls.c into both ssl_tls.c and ssl_msg.c.
So far, ssl_msg.c has been created as an identical copy of ssl_tls.c.
For each block of code in these files, this commit removes it from
precisely one of the two files, depending on where the respective
functionality belongs.
The splitting separates the following functionalities:
1) An implementation of the TLS and DTLS messaging layer, that is,
the record layer as well as the DTLS retransmission state machine.
This is now contained in ssl_msg.c
2) Handshake parsing and writing functions shared between client and
server (functions specific to either client or server are implemented
in ssl_cli.c and ssl_srv.c, respectively).
This is remains in ssl_tls.c.
This commit is the first in a series of commits aiming to split
the content of ssl_tls.c in two files ssl_tls.c and ssl_msg.c.
As a first step, this commit replaces ssl_tls.c by two identical
copies ssl_tls_old.c and ssl_msg.c. Even though the file
ssl_tls_old.c will subsequently be renamed back into ssl_tls.c,
this approach retains the git history in both files.
ssl_decompress_buf() was operating on data from the ssl context, but called at
a point where this data is actually in the rec structure. Call it later so
that the data is back to the ssl structure.
The library style is to start with the includes corresponding to the
current module and then the rest in alphabetical order. Some modules
have several header files (eg. ssl_internal.h).
The recently added error.h includes did not respect this convention and
this commit restores it. In some cases this is not possible just by
moving the error.h declarations. This commit fixes the pre-existing
order in these instances too.
* origin/pr/2854:
Shorter version of mbedtls_ssl_send_fatal_handshake_failure
Resolve#2801 - remove repetitive assignment to ssl->in_msg (the first value was never used)
Resolve#2800 - move declaration to avoid unused variable warning in case MBEDTLS_SSL_PROTO_DTLS was undefined
Resolve#2717 - remove erroneous sizeof (the operator was applied to constant integer number)
Record checking fails if mbedtls_ssl_check_record() is called with
external buffer. Received record sequence number is available in the
incoming record but it is not available in the ssl contexts `in_ctr`-
variable that is used when decoding the sequence number.
To fix the problem, temporarily update ssl context `in_ctr` to
point to the received record header and restore value later.
In TLS, the master secret is always a key. But EAP-TLS uses the TLS
PRF to derive an IV with an empty string for the "secret" input. The
code always stored the secret into a key slot before calling the TLS
PRF, but this doesn't work when the secret is empty, since PSA Crypto
no longer supports empty keys. Add a special case for an empty secret.
The SSL context maintains a set of 'out pointers' indicating the
address at which to write the header fields of the next outgoing
record. Some of these addresses have a static offset from the
beginning of the record header, while other offsets can vary
depending on the active record encryption mechanism: For example,
if an explicit IV is in use, there's an offset between the end
of the record header and the beginning of the encrypted data to
allow the explicit IV to be placed in between; also, if the DTLS
Connection ID (CID) feature is in use, the CID is part of the
record header, shifting all subsequent information (length, IV, data)
to the back.
When setting up an SSL context, the out pointers are initialized
according to the identity transform + no CID, and it is important
to keep them up to date whenever the record encryption mechanism
changes, which is done by the helper function ssl_update_out_pointers().
During context deserialization, updating the out pointers according
to the deserialized record transform went missing, leaving the out
pointers the initial state. When attemping to encrypt a record in
this state, this lead to failure if either a CID or an explicit IV
was in use. This wasn't caught in the tests by the bad luck that
they didn't use CID, _and_ used the default ciphersuite based on
ChaChaPoly, which doesn't have an explicit IV. Changing either of
this would have made the existing tests fail.
This commit fixes the bug by adding a call to ssl_update_out_pointers()
to ssl_context_load() implementing context deserialization.
Extending test coverage is left for a separate commit.
Breaking into a series of statements makes things easier when stepping through
the code in a debugger.
Previous comments we stating the opposite or what the code tested for (what we
want vs what we're erroring out on) which was confusing.
Also expand a bit on the reasons for these restrictions.
Modelled after the config-checking header from session s11n.
The list of relevant config flags was established by manually checking the
fields serialized in the format, and which config.h flags they depend on.
This probably deserves double-checking by reviewers.
Since the type of cid_len is unsigned but shorter than int, it gets
"promoted" to int (which is also the type of the result), unless we make the
other operand an unsigned int which then forces the expression to unsigned int
as well.
The number of meaning of the flags will be determined later, when handling the
relevant struct members. For now three bytes are reserved as an example, but
this number may change later.
This mainly follows the design document (saving all fields marked "saved" in
the main structure and the transform sub-structure) with two exceptions:
- things related to renegotiation are excluded here (there weren't quite in
the design document as the possibility of allowing renegotiation was still
on the table, which is no longer is) - also, ssl.secure_renegotiation (which
is not guarded by MBEDTLS_SSL_RENEGOTIATION because it's used in initial
handshakes even with renegotiation disabled) is still excluded, as we don't
need it after the handshake.
- things related to Connection ID are added, as they weren't present at the
time the design document was written.
The exact format of the header (value of the bitflag indicating compile-time
options, whether and how to merge it with the serialized session header) will
be determined later.
Enforce restrictions indicated in the documentation.
This allows to make some simplifying assumptions (no need to worry about
saving IVs for CBC in TLS < 1.1, nor about saving handshake data) and
guarantees that all values marked as "forced" in the design document have the
intended values and can be skipped when serialising.
Some of the "forced" values are not checked because their value is a
consequence of other checks (for example, session_negotiated == NULL outside
handshakes). We do however check that session and transform are not NULL (even
if that's also a consequence of the initial handshake being over) as we're
going to dereference them and static analyzers may appreciate the info.
This commit introduces a new SSL error code
`MBEDTLS_ERR_SSL_VERSION_MISMATCH`
which can be used to indicate operation failure due to a
mismatch of version or configuration.
It is put to use in the implementation of `mbedtls_ssl_session_load()`
to signal the attempt to de-serialize a session which has been serialized
in a build of Mbed TLS using a different version or configuration.
This commit makes use of the added space in the session header to
encode the state of those parts of the compile-time configuration
which influence the structure of the serialized session in the
present version of Mbed TLS. Specifically, these are
- the options which influence the presence/omission of fields
from mbedtls_ssl_session (which is currently shallow-copied
into the serialized session)
- the setting of MBEDTLS_X509_CRT_PARSE_C, which determines whether
the serialized session contains a CRT-length + CRT-value pair after
the shallow-copied mbedtls_ssl_session instance.
- the setting of MBEDTLS_SSL_SESSION_TICKETS, which determines whether
the serialized session contains a session ticket.
This commit adds space for two bytes in the header of serizlied
SSL sessions which can be used to determine the structure of the
remaining serialized session in the respective version of Mbed TLS.
Specifically, if parts of the session depend on whether specific
compile-time options are set or not, the setting of these options
can be encoded in the added space.
This commit doesn't yet make use of the fields.
The format of serialized SSL sessions depends on the version and the
configuration of Mbed TLS; attempts to restore sessions established
in different versions and/or configurations lead to undefined behaviour.
This commit adds an 3-byte version header to the serialized session
generated and cleanly fails ticket parsing in case a session from a
non-matching version of Mbed TLS is presented.
This bug was present since cert digest had been introduced, which highlights
the need for testing.
While at it, fix a bug in the comment explaining the format - this was
introduced by me copy-pasting to hastily from current baremetal, that has a
different format (see next PR in the series for the same in development).
We have explicit recommendations to use US spelling for technical writing, so
let's apply this to code as well for uniformity. (My fingers tend to prefer UK
spelling, so this needs to be fixed in many places.)
sed -i 's/\([Ss]eriali\)s/\1z/g' **/*.[ch] **/*.function **/*.data ChangeLog
This uncovered a bug that led to a double-free (in practice, in general could
be free() on any invalid value): initially the session structure is loaded
with `memcpy()` which copies the previous values of pointers peer_cert and
ticket to heap-allocated buffers (or any other value if the input is
attacker-controlled). Now if we exit before we got a chance to replace those
invalid values with valid ones (for example because the input buffer is too
small, or because the second malloc() failed), then the next call to
session_free() is going to call free() on invalid pointers.
This bug is fixed in this commit by always setting the pointers to NULL right
after they've been read from the serialised state, so that the invalid values
can never be used.
(An alternative would be to NULL-ify them when writing, which was rejected
mostly because we need to do it when reading anyway (as the consequences of
free(invalid) are too severe to take any risk), so doing it when writing as
well is redundant and a waste of code size.)
Also, while thinking about what happens in case of errors, it became apparent
to me that it was bad practice to leave the session structure in an
half-initialised state and rely on the caller to call session_free(), so this
commit also ensures we always clear the structure when loading failed.
This allows callers to discover what an appropriate size is. Otherwise they'd
have to either try repeatedly, or allocate an overly large buffer (or some
combination of those).
Adapt documentation an example usage in ssl_client2.
Avoid useless copy with mbedtls_ssl_get_session() before serialising.
Used in ssl_client2 for testing and demonstrating usage, but unfortunately
that means mbedtls_ssl_get_session() is no longer tested, which will be fixed
in the next commit.
On client side, this is required for the main use case where of serialising a
session for later resumption, in case tickets are used.
On server side, this doesn't change much as ticket_len will always be 0.
This unblocks testing the functions by using them in ssl_client2, which will
be done in the next commit.
This finishes making these functions public. Next step is to get them tested,
but there's currently a blocker for that, see next commit (and the commit
after it for tests).
While 'session hash' is currently unique, so suitable to prove that the
intended code path has been taken, it's a generic enough phrase that in the
future we might add other debug messages containing it in completely unrelated
code paths. In order to future-proof the accuracy of the test, let's use a
more specific string.
The previous comment used "TLS" as a shortcut for "TLS 1.0/1.1" which was
confusing. This partially reflected the names of the calc_verify/finished that
go ssl, tls (for 1.0/1.1) tls_shaxxx (for 1.2), but still it's clearer to be
explicit in the comment - and perhaps in the long term the function names
could be clarified instead.
When using this function to deserialize, it's not a problem to have a session
structure as input as we'll have one around anyway (most probably freshly
deserialised).
However for tests it's convenient to be able to build a transform without
having a session structure around.
Also, removing this structure from parameters makes the function signature
more uniform, the only exception left being the ssl param at the end that's
hard to avoid for now.
Configs with no DEBUG_C are used for example in test-ref-configs.pl, which also
runs parts of compat.sh or ssl-opt.sh on them, so the added 'ssl = NULL'
statements will be exercised in those tests at least.
Make it more explicit what's used. Unfortunately, we still need ssl as a
parameter for debugging, and because calc_verify wants it as a parameter (for
all TLS versions except SSL3 it would actually only need handshake, but SSL3
also accesses session_negotiate).
It's also because of calc_verify that we can't make it const yet, but see next
commit.
* origin/pr/2790: (40 commits)
Fix possibly-lossy conversion warning from MSVC
Reintroduce length 0 check for records
Don't use memcpy() for 2-byte copy operation
Remove integer parsing macro
Fix alignment in record header parsing routine
Don't disallow 'record from another epoch' log msg in proxy ref test
Make sure 'record from another epoch' is displayed for next epoch
Implement record checking API
Mark ssl_parse_record_header() as `const` in SSL context
Make mbedtls_ssl_in_hdr_len() CID-unaware
Remove duplicate setting of ssl->in_msgtype and ssl->in_msglen
Move update of in_xxx fields in ssl_get_next_record()
Move update of in_xxx fields outside of ssl_prepare_record_content()
Reduce dependency of ssl_prepare_record_content() on in_xxx fields
Move ssl_update_in_pointers() to after record hdr parsing
Mark DTLS replay check as `const` on the SSL context
Move updating the internal rec ptrs to outside of rec hdr parsing
Mark ssl_decrypt_buf() as `const in the input SSL context
Adapt ssl_prepare_record_content() to use SSL record structure
Use record length from record structure when fetching content in TLS
...
* origin/pr/2781:
Documentation fixes according to review
Remove unused label in ssl_client2/ssl_server2
Add missing word in documentation of mbedtls_ssl_check_record()
cli/srv ex: Add dbg msg if record checking gives inconsistent result
Fix minor issues in documentation of mbedtls_ssl_check_record()
State that record checking is DTLS only and doesn't check content type
Update version_features.c
Pass dgrams to mbedtls_ssl_check_record in ssl_client2/server2
Add IO wrappers to ssl_server2 as interm's between NET and SSL layer
Add IO wrappers to ssl_client2 as interm's between NET and SSL layer
Introduce configuration option and API for SSL record checking
This commit implements the record checking API
mbedtls_ssl_check_record()
on top of the restructured incoming record stack.
Specifically, it makes use of the fact that the core processing routines
ssl_parse_record_header()
mbedtls_ssl_decrypt_buf()
now operate on instances of the SSL record structure mbedtls_record
instead of the previous mbedtls_ssl_context::in_xxx fields.
ssl_get_next_record() updates the legacy in_xxx fields in two places,
once before record decryption and once after. Now that record decryption
doesn't use or affect the in_xxx fields anymore, setting up the these
legacy fields can entirely be moved to the end of ssl_get_next_record(),
which is what this comit does.
This commit solely moves existing code, but doesn't yet simplify the
now partially redundant settings of the in_xxx fields. This will be
done in a separate commit.
Multiple record attributes such as content type and payload length
may change during record decryption, and the legacy in_xxx fields
in the SSL context therefore need to be updated after the record
decryption routine ssl_decrypt_buf() has been called.
After the previous commit has made ssl_prepare_record_content()
independent of the in_xxx fields, setting them can be moved
outside of ssl_prepare_record_content(), which is what this
commit does.
Previously, ssl_update_in_pointers() ensured that the in_xxx pointers
in the SSL context are set to their default state so that the record
header parsing function ssl_parse_record_header() could make use of them.
By now, the latter is independent of these pointers, so they don't need
to be setup before calling ssl_parse_record_header() anymore.
However, other parts of the messaging stack might still depend on it
(to be studied), and hence this commit does not yet reomve
ssl_update_in_pointers() entirely.
The stack maintains pointers mbedtls_ssl_context::in_xxx pointing to
various parts of the [D]TLS record header. Originally, these fields
were determined and set in ssl_parse_record_header(). By now,
ssl_parse_record_header() has been modularized to setup an instance
of the internal SSL record structure mbedtls_record, and to derive
the old in_xxx fields from that.
This commit takes a further step towards removing the in_xxx fields
by deriving them from the established record structure _outside_ of
ssl_parse_record_header() after the latter has succeeded.
One exception is the handling of possible client reconnects,
which happens in the case then ssl_parse_record_header() returns
MBEDTLS_ERR_SSL_UNEXPECTED_RECORD; since ssl_check_client_reconnect()
so far uses the in_xxx fields, they need to be derived from the
record structure beforehand.
This commit makes a first step towards modularizing the incoming record
processing by having it operate on instances of the structure mbedtls_record
representing SSL records.
So far, only record encryption/decryption operate in terms of record
instances, but the rest of the parsing doesn't. In particular,
ssl_parse_record_header() operates directly on the fixed input buffer,
setting the various ssl->in_xxx pointers and fields, and only directly
before/after calling ssl_decrypt_buf() these fields a converted to/from
mbedtls_record instances.
This commit does not yet remove the ssl->in_xxx fields, but makes a step
towards extending the lifetime of mbedtls_record structure representing
incoming records, by modifying ssl_parse_record_header() to setup an
instance of mbedtls_record, and setting the ssl->in_xxx fields from that
instance. The instance so-constructed isn't used further so far, and in
particular it is not yet consolidated with the instance set up for use
in ssl_decrypt_record(). That's for a later commit.
Previously, ssl_parse_record_header() did not check whether the current
datagram is large enough to hold a record of the advertised size. This
could lead to records being silently skipped over or backed up on the
basis of an invalid record length. Concretely, the following would happen:
1) In the case of a record from an old epoch, the record would be
'skipped over' by setting next_record_offset according to the advertised
but non-validated length, and only in the subsequent mbedtls_ssl_fetch_input()
it would be noticed in an assertion failure if the record length is too
large for the current incoming datagram.
While not critical, this is fragile, and also contrary to the intend
that MBEDTLS_ERR_SSL_INTERNAL_ERROR should never be trigger-able by
external input.
2) In the case of a future record being buffered, it might be that we
backup a record before we have validated its length, hence copying
parts of the input buffer that don't belong to the current record.
This is a bug, and it's by luck that it doesn't seem to have critical
consequences.
This commit fixes this by modifying ssl_parse_record_header() to check that
the current incoming datagram is large enough to hold a record of the
advertised length, returning MBEDTLS_ERR_SSL_INVALID_RECORD otherwise.
We don't send alerts on other instances of ill-formed records,
so why should we do it here? If we want to keep it, the alerts
should rather be sent ssl_get_next_record().
As explained in the previous commit, if mbedtls_ssl_fetch_input()
is called multiple times, all but the first call are equivalent to
bounds checks in the incoming datagram.
In DTLS, if mbedtls_ssl_fetch_input() is called multiple times without
resetting the input buffer in between, the non-initial calls are functionally
equivalent to mere bounds checks ensuring that the incoming datagram is
large enough to hold the requested data. In the interest of code-size
and modularity (removing a call to a non-const function which is logically
const in this instance), this commit replaces such a call to
mbedtls_ssl_fetch_input() by an explicit bounds check in
ssl_parse_record_header().
Previously, `ssl_handle_possible_reconnect()` was part of
`ssl_parse_record_header()`, which was required to return a non-zero error
code to indicate a record which should not be further processed because it
was invalid, unexpected, duplicate, .... In this case, some error codes
would lead to some actions to be taken, e.g. `MBEDTLS_ERR_SSL_EARLY_MESSAGE`
to potential buffering of the record, but eventually, the record would be
dropped regardless of the precise value of the error code. The error code
`MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED` returned from
`ssl_handle_possible_reconnect()` did not receive any special treatment and
lead to silent dopping of the record - in particular, it was never returned
to the user.
In the new logic this commit introduces, `ssl_handle_possible_reconnect()` is
part of `ssl_check_client_reconnect()` which is triggered _after_
`ssl_parse_record_header()` found an unexpected record, which is already in
the code-path eventually dropping the record; we want to leave this code-path
only if a valid cookie has been found and we want to reset, but do nothing
otherwise. That's why `ssl_handle_possible_reconnect()` now returns `0` unless
a valid cookie has been found or a fatal error occurred.
Availability of sufficient incoming data should be checked when
it is needed, which is in mbedtls_ssl_fetch_input(), and this
function has the necessary bounds checks in place.
The check is in terms of the internal input buffer length and is
hence likely to be originally intended to protect against overflow
of the input buffer when fetching data from the underlying
transport in mbedtls_ssl_fetch_input(). For locality of reasoning,
it's better to perform such a check close to where it's needed,
and in fact, mbedtls_ssl_fetch_input() _does_ contain an equivalent
bounds check, too, rendering the bounds check in question redundant.
mbedtls_ssl_decrypt_buf() asserts that the passed transform is not NULL,
but the function is only invoked in a single place, and this invocation
is clearly visible to be within a branch ensuring that the incoming
transform isn't NULL. Remove the assertion for the benefit of code-size.
The previous code performed architectural maximum record length checks
both before and after record decryption. Since MBEDTLS_SSL_IN_CONTENT_LEN
bounds the maximum length of the record plaintext, it suffices to check
only once after (potential) decryption.
This must not be confused with the internal check that the record
length is small enough to make the record fit into the internal input
buffer; this is done in mbedtls_ssl_fetch_input().
When MBEDTLS_SSL_ENCRYPT_THEN_MAC is enabled, but not
MBEDTLS_SSL_SOME_MODES_USE_MAC, mbedtls_ssl_derive_keys() and
build_transforms() will attempt to use a non-existent `encrypt_then_mac`
field in the ssl_transform.
Compile [ 93.7%]: ssl_tls.c
[Error] ssl_tls.c@865,14: 'mbedtls_ssl_transform {aka struct mbedtls_ssl_transform}' ha
s no member named 'encrypt_then_mac'
[ERROR] ./mbed-os/features/mbedtls/src/ssl_tls.c: In function 'mbedtls_ssl_derive_keys'
:
./mbed-os/features/mbedtls/src/ssl_tls.c:865:14: error: 'mbedtls_ssl_transform {aka str
uct mbedtls_ssl_transform}' has no member named 'encrypt_then_mac'
transform->encrypt_then_mac = session->encrypt_then_mac;
^~
Change mbedtls_ssl_derive_keys() and build_transforms() to only access
`encrypt_then_mac` if `encrypt_then_mac` is actually present.
Add a regression test to detect when we have regressions with
configurations that do not include any MAC ciphersuites.
Fixes d56ed2491b ("Reduce size of `ssl_transform` if no MAC ciphersuite is enabled")
This commit modifies mbedtls_ssl_get_peer_cid() to also allow passing
NULL pointers in the arguments for the peer's CID value and length, in
case this information is needed.
For example, some users might only be interested in whether the use of
the CID was negotiated, in which case both CID value and length pointers
can be set to NULL. Other users might only be interested in confirming
that the use of CID was negotiated and the peer chose the empty CID,
in which case the CID value pointer only would be set to NULL.
It doesn't make sense to pass a NULL pointer for the CID length but a
non-NULL pointer for the CID value, as the caller has no way of telling
the length of the returned CID - and this case is therefore forbidden.
This commit modifies the CID configuration API mbedtls_ssl_conf_cid_len()
to allow the configuration of the stack's behaviour when receiving an
encrypted DTLS record with unexpected CID.
There are two options:
1. Don't set it, and don't use it during record protection,
guarding the respective paths by a check whether TLS or
DTLS is used.
2. Set it to the default value even for TLS, and avoid the
protocol-dependent branch during record protection.
This commit picks option 2.
This commit changes the stack's behaviour when facing a record
with a non-matching CID. Previously, the stack failed in this
case, while now we silently skip over the current record.
Previously, ssl_get_next_record() would fetch 13 Bytes for the
record header and hand over to ssl_parse_record_header() to parse
and validate these. With the introduction of CID-based records, the
record length is not known in advance, and parsing and validating
must happen at the same time. ssl_parse_record_header() is therefore
rewritten in the following way:
1. Fetch and validate record content type and version.
2. If the record content type indicates a record including a CID,
adjust the record header pointers accordingly; here, we use the
statically configured length of incoming CIDs, avoiding any
elaborate CID parsing mechanism or dependency on the record
epoch, as explained in the previous commit.
3. Fetch the rest of the record header (note: this doesn't actually
fetch anything, but makes sure that the datagram fetched in the
earlier call to ssl_fetch_input() contains enough data).
4. Parse and validate the rest of the record header as before.
This commit modifies the code surrounding the invocations of
ssl_decrypt_buf() and ssl_encrypt_buf() to deal with a change
of record content type during CID-based record encryption/decryption.
mbedtls_ssl_context contains pointers in_buf, in_hdr, in_len, ...
which point to various parts of the header of an incoming TLS or
DTLS record; similarly, there are pointers out_buf, ... for
outgoing records.
This commit adds fields in_cid and out_cid which point to where
the CID of incoming/outgoing records should reside, if present,
namely prior to where the record length resides.
Quoting https://tools.ietf.org/html/draft-ietf-tls-dtls-connection-id-04:
The DTLSInnerPlaintext value is then encrypted and the CID added to
produce the final DTLSCiphertext.
struct {
ContentType special_type = tls12_cid; /* 25 */
ProtocolVersion version;
uint16 epoch;
uint48 sequence_number;
opaque cid[cid_length]; // New field
uint16 length;
opaque enc_content[DTLSCiphertext.length];
} DTLSCiphertext;
For outgoing records, out_cid is set in ssl_update_out_pointers()
based on the settings in the current outgoing transform.
For incoming records, ssl_update_in_pointers() sets in_cid as if no
CID was present, and it is the responsibility of ssl_parse_record_header()
to update the field (as well as in_len, in_msg and in_iv) when parsing
records that do contain a CID. This will be done in a subsequent commit.
Finally, the code around the invocations of ssl_decrypt_buf()
and ssl_encrypt_buf() is adapted to transfer the CID from the
input/output buffer to the CID field in the internal record
structure (which is what ssl_{encrypt/decrypt}_buf() uses).
Note that mbedtls_ssl_in_hdr_len() doesn't need change because
it infers the header length as in_iv - in_hdr, which will account
for the CID for records using such.
Using the Connection ID extension increases the maximum record expansion
because
- the real record content type is added to the plaintext
- the plaintext may be padded with an arbitrary number of
zero bytes, in order to prevent leakage of information
through package length analysis. Currently, we always
pad the plaintext in a minimal way so that its length
is a multiple of 16 Bytes.
This commit adapts the various parts of the library to account
for that additional source of record expansion.
Context:
The CID draft does not require that the length of CIDs used for incoming
records must not change in the course of a connection. Since the record
header does not contain a length field for the CID, this means that if
CIDs of varying lengths are used, the CID length must be inferred from
other aspects of the record header (such as the epoch) and/or by means
outside of the protocol, e.g. by coding its length in the CID itself.
Inferring the CID length from the record's epoch is theoretically possible
in DTLS 1.2, but it requires the information about the epoch to be present
even if the epoch is no longer used: That's because one should silently drop
records from old epochs, but not the entire datagrams to which they belong
(there might be entire flights in a single datagram, including a change of
epoch); however, in order to do so, one needs to parse the record's content
length, the position of which is only known once the CID length for the epoch
is known. In conclusion, it puts a significant burden on the implementation
to infer the CID length from the record epoch, which moreover mangles record
processing with the high-level logic of the protocol (determining which epochs
are in use in which flights, when they are changed, etc. -- this would normally
determine when we drop epochs).
Moreover, with DTLS 1.3, CIDs are no longer uniquely associated to epochs,
but every epoch may use a set of CIDs of varying lengths -- in that case,
it's even theoretically impossible to do record header parsing based on
the epoch configuration only.
We must therefore seek a way for standalone record header parsing, which
means that we must either (a) fix the CID lengths for incoming records,
or (b) allow the application-code to configure a callback to implement
an application-specific CID parsing which would somehow infer the length
of the CID from the CID itself.
Supporting multiple lengths for incoming CIDs significantly increases
complexity while, on the other hand, the restriction to a fixed CID length
for incoming CIDs (which the application controls - in contrast to the
lengths of the CIDs used when writing messages to the peer) doesn't
appear to severely limit the usefulness of the CID extension.
Therefore, the initial implementation of the CID feature will require
a fixed length for incoming CIDs, which is what this commit enforces,
in the following way:
In order to avoid a change of API in case support for variable lengths
CIDs shall be added at some point, we keep mbedtls_ssl_set_cid(), which
includes a CID length parameter, but add a new API mbedtls_ssl_conf_cid_len()
which applies to an SSL configuration, and which fixes the CID length that
any call to mbetls_ssl_set_cid() which applies to an SSL context that is bound
to the given SSL configuration must use.
While this creates a slight redundancy of parameters, it allows to
potentially add an API like mbedtls_ssl_conf_cid_len_cb() later which
could allow users to register a callback which dynamically infers the
length of a CID at record header parsing time, without changing the
rest of the API.
The function mbedtls_ssl_hdr_len() returns the length of the record
header (so far: always 13 Bytes for DTLS, and always 5 Bytes for TLS).
With the introduction of the CID extension, the lengths of record
headers depends on whether the records are incoming or outgoing,
and also on the current transform.
Preparing for this, this commit splits mbedtls_ssl_hdr_len() in two
-- so far unmodified -- functions mbedtls_ssl_in_hdr_len() and
mbedtls_ssl_out_hdr_len() and replaces the uses of mbedtls_ssl_hdr_len()
according to whether they are about incoming or outgoing records.
There is no need to change the signature of mbedtls_ssl_{in/out}_hdr_len()
in preparation for its dependency on the currently active transform,
since the SSL context is passed as an argument, and the currently
active transform is referenced from that.
With the introduction of the CID feature, the stack needs to be able
to handle a change of record content type during record protection,
which in particular means that the record content type check will
need to move or be duplicated.
This commit introduces a tiny static helper function which checks
the validity of record content types, which hopefully makes it
easier to subsequently move or duplicate this check.
With the introduction of the CID extension, the record content type
may change during decryption; we must therefore re-consider every
record content type check that happens before decryption, and either
move or duplicate it to ensure it also applies to records whose
real content type is only revealed during decryption.
This commit does this for the silent dropping of unexpected
ApplicationData records in DTLS. Previously, this was caught
in ssl_parse_record_header(), returning
MBEDTLS_ERR_SSL_UNEXPECTED_RECORD which in ssl_get_next_record()
would lead to silent skipping of the record.
When using CID, this check wouldn't trigger e.g. when delayed
encrypted ApplicationData records come on a CID-based connection
during a renegotiation.
This commit moves the check to mbedtls_ssl_handle_message_type()
and returns MBEDTLS_ERR_SSL_NON_FATAL if it triggers, which leads
so silent skipover in the caller mbedtls_ssl_read_record().
The SSL context structure mbedtls_ssl_context contains several pointers
ssl->in_hdr, ssl->in_len, ssl->in_iv, ssl->in_msg pointing to various
parts of the record header in an incoming record, and they are setup
in the static function ssl_update_in_pointers() based on the _expected_
transform for the next incoming record.
In particular, the pointer ssl->in_msg is set to where the record plaintext
should reside after record decryption, and an assertion double-checks this
after each call to ssl_decrypt_buf().
This commit removes the dependency of ssl_update_in_pointers() on the
expected incoming transform by setting ssl->in_msg to ssl->in_iv --
the beginning of the record content (potentially including the IV) --
and adjusting ssl->in_msg after calling ssl_decrypt_buf() on a protected
record.
Care has to be taken to not load ssl->in_msg before calling
mbedtls_ssl_read_record(), then, which was previously the
case in ssl_parse_server_hello(); the commit fixes that.
If a record exhibits an invalid feature only after successful
authenticated decryption, this is a protocol violation by the
peer and should hence lead to connection failure. The previous
code, however, would silently ignore such records. This commit
fixes this.
So far, the only case to which this applies is the non-acceptance
of empty non-AD records in TLS 1.2. With the present commit, such
records lead to connection failure, while previously, they were
silently ignored.
With the introduction of the Connection ID extension (or TLS 1.3),
this will also apply to records whose real content type -- which
is only revealed during authenticated decryption -- is invalid.
In contrast to other aspects of the Connection ID extension,
the CID-based additional data for MAC computations differs from
the non-CID case even if the CID length is 0, because it
includes the CID length.
Quoting the CID draft 04:
- Block Ciphers:
MAC(MAC_write_key, seq_num +
tls12_cid + // New input
DTLSPlaintext.version +
cid + // New input
cid_length + // New input
length_of_DTLSInnerPlaintext + // New input
DTLSInnerPlaintext.content + // New input
DTLSInnerPlaintext.real_type + // New input
DTLSInnerPlaintext.zeros // New input
)
And similar for AEAD and Encrypt-then-MAC.
This commit temporarily comments the copying of the negotiated CIDs
into the established ::mbedtls_ssl_transform in mbedtls_ssl_derive_keys()
until the CID feature has been fully implemented.
While mbedtls_ssl_decrypt_buf() and mbedtls_ssl_encrypt_buf() do
support CID-based record protection by now and can be unit tested,
the following two changes in the rest of the stack are still missing
before CID-based record protection can be integrated:
- Parsing of CIDs in incoming records.
- Allowing the new CID record content type for incoming records.
- Dealing with a change of record content type during record
decryption.
Further, since mbedtls_ssl_get_peer_cid() judges the use of CIDs by
the CID fields in the currently transforms, this change also requires
temporarily disabling some grepping for ssl_client2 / ssl_server2
debug output in ssl-opt.sh.
This commit modifies ssl_decrypt_buf() and ssl_encrypt_buf()
to include the CID into authentication data during record
protection.
It does not yet implement the new DTLSInnerPlaintext format
from https://tools.ietf.org/html/draft-ietf-tls-dtls-connection-id-04
The guard for the definition of the function was different from the guard on
its only use - make it the same.
This has been caught by tests/scripts/key-exchanges.pl. It had not been caught
by this script in earlier CI runs, because previously USE_PSA_CRYPTO was
disabled in the builds used by this script; enabling it uncovered the issue.
Add an additional function `mbedtls_ssl_export_keys_ext_t()`
for exporting key, that adds additional information such as
the used `tls_prf` and the random bytes.
This commit adds tests exercising mutually inverse pairs of
record encryption and decryption transformations for the various
transformation types allowed in TLS: Stream, CBC, and AEAD.
The hash contexts `ssl_transform->md_ctx_{enc/dec}` are not used if
only AEAD ciphersuites are enabled. This commit removes them from the
`ssl_transform` struct in this case, saving a few bytes.
This commit guards code specific to AEAD, CBC and stream cipher modes
in `ssl_derive_keys` by the respective configuration flags, analogous
to the guards that are already in place in the record decryption and
encryption functions `ssl_decrypt_buf` resp. `ssl_decrypt_buf`.
Analogous to the previous commit, but concerning the record decryption
routine `ssl_decrypt_buf`.
An important change regards the checking of CBC padding:
Prior to this commit, the CBC padding check always read 256 bytes at
the end of the internal record buffer, almost always going past the
boundaries of the record under consideration. In order to stay within
the bounds of the given record, this commit changes this behavior by
always reading the last min(256, plaintext_len) bytes of the record
plaintext buffer and taking into consideration the last `padlen` of
these for the padding check. With this change, the memory access
pattern and runtime of the padding check is entirely determined by
the size of the encrypted record, in particular not giving away
any information on the validity of the padding.
The following depicts the different behaviors:
1) Previous CBC padding check
1.a) Claimed padding length <= plaintext length
+----------------------------------------+----+
| Record plaintext buffer | | PL |
+----------------------------------------+----+
\__ PL __/
+------------------------------------...
| read for padding check ...
+------------------------------------...
|
contents discarded
from here
1.b) Claimed padding length > plaintext length
+----------------------------------------+----+
| Record plaintext buffer | PL |
+----------------------------------------+----+
+-------------------------...
| read for padding check ...
+-------------------------...
|
contents discarded
from here
2) New CBC padding check
+----------------------------------------+----+
| Record plaintext buffer | | PL |
+----------------------------------------+----+
\__ PL __/
+---------------------------------------+
| read for padding check |
+---------------------------------------+
|
contents discarded
until here
The previous version of the record encryption function
`ssl_encrypt_buf` takes the entire SSL context as an argument,
while intuitively, it should only depend on the current security
parameters and the record buffer.
Analyzing the exact dependencies, it turned out that in addition
to the currently active `ssl_transform` instance and the record
information, the encryption function needs access to
- the negotiated protocol version, and
- the status of the encrypt-then-MAC extension.
This commit moves these two fields into `ssl_transform` and
changes the signature of `ssl_encrypt_buf` to only use an instance
of `ssl_transform` and an instance of the new `ssl_record` type.
The `ssl_context` instance is *solely* kept for the debugging macros
which need an SSL context instance.
The benefit of the change is twofold:
1) It avoids the need of the MPS to deal with instances of
`ssl_context`. The MPS should only work with records and
opaque security parameters, which is what the change in
this commit makes progress towards.
2) It significantly eases testing of the encryption function:
independent of any SSL context, the encryption function can
be passed some record buffer to encrypt alongside some arbitrary
choice of parameters, and e.g. be checked to not overflow the
provided memory.
The macro constant `MBEDTLS_SSL_MAC_ADD` defined in `ssl_internal.h`
defines an upper bound for the amount of space needed for the record
authentication tag. Its definition distinguishes between the
presence of an ARC4 or CBC ciphersuite suite, in which case the maximum
size of an enabled SHA digest is used; otherwise, `MBEDTLS_SSL_MAC_ADD`
is set to 16 to accomodate AEAD authentication tags.
This assignment has a flaw in the situation where confidentiality is
not needed and the NULL cipher is in use. In this case, the
authentication tag also uses a SHA digest, but the definition of
`MBEDTLS_SSL_MAC_ADD` doesn't guarantee enough space.
The present commit fixes this by distinguishing between the presence
of *some* ciphersuite using a MAC, including those using a NULL cipher.
For that, the previously internal macro `SSL_SOME_MODES_USE_MAC` from
`ssl_tls.c` is renamed and moved to the public macro
`MBEDTLS_SOME_MODES_USE_MAC` defined in `ssl_internal.h`.
Prior to this commit, the security parameter struct `ssl_transform`
contained a `ciphersuite_info` field pointing to the information
structure for the negotiated ciphersuite. However, the only
information extracted from that structure that was used in the core
encryption and decryption functions `ssl_encrypt_buf`/`ssl_decrypt_buf`
was the authentication tag length in case of an AEAD cipher.
The present commit removes the `ciphersuite_info` field from the
`ssl_transform` structure and adds an explicit `taglen` field
for AEAD authentication tag length.
This is in accordance with the principle that the `ssl_transform`
structure should contain the raw parameters needed for the record
encryption and decryption functions to work, but not the higher-level
information that gave rise to them. For example, the `ssl_transform`
structure implicitly contains the encryption/decryption keys within
their cipher contexts, but it doesn't contain the SSL master or
premaster secrets. Likewise, it contains an explicit `maclen`, while
the status of the 'Truncated HMAC' extension -- which determines the
value of `maclen` when the `ssl_transform` structure is created in
`ssl_derive_keys` -- is not contained in `ssl_transform`.
The `ciphersuite_info` pointer was used in other places outside
the encryption/decryption functions during the handshake, and for
these functions to work, this commit adds a `ciphersuite_info` pointer
field to the handshake-local `ssl_handshake_params` structure.
The `ssl_transform` security parameter structure contains opaque
cipher contexts for use by the record encryption/decryption functions
`ssl_decrypt_buf`/`ssl_encrypt_buf`, while the underlying key material
is configured once in `ssl_derive_keys` and is not explicitly dealt with
anymore afterwards. In particular, the key length is not needed
explicitly by the encryption/decryption functions but is nonetheless
stored in an explicit yet superfluous `keylen` field in `ssl_transform`.
This commit removes this field.
Resolve conflicts by performing the following:
- Ensure calls to mbedtls_x509_crt_verify_* are made with callbacks
* origin/pr/2539:
Make CRT callback tests more robust
Rename constant in client2.c
Fix typo
Add test for configuration specific CRT callback
Fix doxygen documentation of mbedtls_ssl_set_verify()
Add test exercising context-specific CRT callback to ssl-opt.sh
Add cmd to use context-specific CRT callback in ssl_client2
Implement context-specific verification callbacks
Add context-specific CRT verification callbacks
Improve documentation of mbedtls_ssl_conf_verify()
If we don't need to store the peer's CRT chain permanently, we may
free it immediately after verifying it. Moreover, since we parse the
CRT chain in-place from the input buffer in this case, pointers from
the CRT structure remain valid after freeing the structure, and we
use that to extract the digest and pubkey from the CRT after freeing
the structure.
It is used in `mbedtls_ssl_session_free()` under
`MBEDTLS_X509_CRT_PARSE_C`, but defined only if
`MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED`.
Issue #2422 tracks the use of
`MBEDTLS_KEY_EXCHANGE__WITH_CERT_ENABLED` instead of
`MBEDTLS_X509_CRT_PARSE_C` for code and fields
related to CRT-based ciphersuites.
This commit modifies `mbedtls_ssl_parse_certificate()` to store a
copy of the peer's public key after parsing and verifying the peer's
CRT chain.
So far, this leads to heavy memory duplication: We have the CRT chain
in the I/O buffer, then parse (and, thereby, copy) it to a
`mbedtls_x509_crt` structure, and then make another copy of the
peer's public key, plus the overhead from the MPI and ECP structures.
This inefficiency will soon go away to a significant extend, because:
- Another PR adds functionality to parse CRTs without taking
ownership of the input buffers. Applying this here will allow
parsing and verifying the peer's chain without making an additional
raw copy. The overhead reduces to the size of `mbedtls_x509_crt`,
the public key, and the DN structures referenced in the CRT.
- Once copyless parsing is in place and the removal of the peer CRT
is fully implemented, we can extract the public key bounds from
the parsed certificate and then free the entire chain before
parsing the public key again. This means that we never store
the parsed public key twice at the same time.
When removing the (session-local) copy of the peer's CRT chain, we must
keep a handshake-local copy of the peer's public key, as (naturally) every
key exchange will make use of that public key at some point to verify that
the peer actually owns the corresponding private key (e.g., verify signatures
from ServerKeyExchange or CertificateVerify, or encrypt a PMS in a RSA-based
exchange, or extract static (EC)DH parameters).
This commit adds a PK context field `peer_pubkey` to the handshake parameter
structure `mbedtls_handshake_params_init()` and adapts the init and free
functions accordingly. It does not yet make actual use of the new field.
`mbedtls_ssl_parse_certificate()` parses the peer's certificate chain
directly into the `peer_cert` field of the `mbedtls_ssl_session`
structure being established. To allow to optionally remove this field
from the session structure, this commit changes this to parse the peer's
chain into a local variable instead first, which can then either be freed
after CRT verification - in case the chain should not be stored - or
mapped to the `peer_cert` if it should be kept. For now, only the latter
is implemented.
A subsequent commit will need this function in the session ticket
and session cache implementations. As the latter are server-side,
this commit also removes the MBEDTLS_SSL_CLI_C guard.
For now, the function is declared in ssl_internal.h and hence not
part of the public API.
This commit modifies the helper `ssl_parse_certificate_chain()` to
accep any target X.509 CRT chain instead of hardcoding it to
`session_negotiate->peer_cert`. This increases modularity and paves
the way towards removing `mbedtls_ssl_session::peer_cert`.
This commit adds a helper function `ssl_parse_certificate_coordinate()`
which checks whether a `Certificate` message is expected from the peer.
The logic is the following:
- For ciphersuites which don't use server-side CRTs, no Certificate
message is expected (neither for the server, nor the client).
- On the server, no client certificate is expected in the following cases:
* The server server didn't request a Certificate, which is controlled
by the `authmode` setting.
* A RSA-PSK suite is used; this is the only suite using server CRTs
but not allowing client-side authentication.
This commit introduces a static helper function
`mbedtls_ssl_ciphersuite_uses_srv_cert()`
which determines whether a ciphersuite may make use of server-side CRTs.
This function is in turn uses in `mbedtls_ssl_parse_certificate()` to
skip certificate parsing for ciphersuites which don't involve CRTs.
Note: Ciphersuites not using server-side CRTs don't allow client-side CRTs
either, so it is safe to guard `mbedtls_ssl_{parse/write}_certificate()`
this way.
Note: Previously, the code uses a positive check over the suites
- MBEDTLS_KEY_EXCHANGE_PSK
- MBEDTLS_KEY_EXCHANGE_DHE_PSK
- MBEDTLS_KEY_EXCHANGE_ECDHE_PSK
- MBEDTLS_KEY_EXCHANGE_ECJPAKE,
while now, it uses a negative check over `mbedtls_ssl_ciphersuite_uses_srv_cert()`,
which checks for the suites
- MBEDTLS_KEY_EXCHANGE_RSA
- MBEDTLS_KEY_EXCHANGE_RSA_PSK
- MBEDTLS_KEY_EXCHANGE_DHE_RSA
- MBEDTLS_KEY_EXCHANGE_ECDH_RSA
- MBEDTLS_KEY_EXCHANGE_ECDHE_RSA
- MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA
- MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA
This is equivalent since, together, those are all ciphersuites.
Quoting ssl_ciphersuites.h:
```
typedef enum {
MBEDTLS_KEY_EXCHANGE_NONE = 0,
MBEDTLS_KEY_EXCHANGE_RSA,
MBEDTLS_KEY_EXCHANGE_DHE_RSA,
MBEDTLS_KEY_EXCHANGE_ECDHE_RSA,
MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA,
MBEDTLS_KEY_EXCHANGE_PSK,
MBEDTLS_KEY_EXCHANGE_DHE_PSK,
MBEDTLS_KEY_EXCHANGE_RSA_PSK,
MBEDTLS_KEY_EXCHANGE_ECDHE_PSK,
MBEDTLS_KEY_EXCHANGE_ECDH_RSA,
MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA,
MBEDTLS_KEY_EXCHANGE_ECJPAKE,
} mbedtls_key_exchange_type_t;
```
