Unless I missed something, all remaining instance of all macros are in
files where it makes sense to use these. I went over the output of:
git grep -c -E 'MBEDTLS_(MD5|RIPEMD160|SHA[0-9]*)_C'
and I think all the files listed fall into one of the following
acceptable categories:
- documentation and historical documents: Changelog, docs/**/*.md
- config files and related: mbedtls_config.h, configs/*.h,
check_config.h, config_psa.h, etc.
- scripts that build/modify configs: all.sh, depends.py,
set_psa_test_dependencies.py, etc.
- implementation of MD or PSA or related: md.h, psa_util.h, etc. and
corresponding test suites
- implementation of hashes: md5.c, sha256.h, etc. and corresponding test
suites
- two example programs using a low-level hash API: hash/hello.c,
pkey/ecdsa.c
- test/benchmark.c, test/selftest.c: actually want our built-in
implementations
- a function in test_suite_psa_crypto_storage_format that is
specifically for checking if the hash is built in.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
We only enable SHA-256, so let's use that.
Previously the entropy module was deciding which hash to use based on
MBEDTLS_xxx_C feature macros, and since only SHA256_C was defined in
config_test_driver.h, it used that and things worked.
However since entropy was changed to use MD light, and
MBEDTLS_MD_CAN_xxx feature macros, we had an issue: when building
libtestdriver1 with its default config, MBEDTLS_PSA_ACCEL_ALG_SHA_512 is
defined even though there's no actual accelerator in the build. (This is
done so that PSA_WANT_ALG_SHA_512 can remain defined in order to match
the application's config, while not defining
MBEDTLS_PSA_BUILTIN_ALG_SHA_512 in order to only include what we need in
the build of libtestdriver1.) This will cause MD to dispatch to PSA in
order to take advantage of the accelerator, which will then fail because
there is no accelerator not builtin for this hash.
In the long-term, perhaps it would be best to address the root of the
issue: defining MBEDTLS_PSA_ACCEL_ALG_SHA_512 in a build that doesn't
actually have a SHA-512 accelerator is a lie. But that would require
significant changes in libtestdriver1. So for now, just fix the most
obvious symptom (picking a non-supported hash in entropy.h) by forcing
the choice of hash to match what's in the libtestdriver1 config.
Note: if the copy of entropy module in libtestdriver1 doesn't work,
we'll get a failure when calling libtestdriver1_psa_crypto_init(), which
we do, from mbedtls_test_transparent_init(), indirectly called by our
psa_crypto_init() which will then fail.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Introduce MD_OR_USE_PSA_INIT/DONE. This will likely be used everywhere
in X.509 and SSL/TLS, but most places in PK only need USE_PSA_INIT/DONE.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
During test of component build_arm_linux_gnueabi_gcc_arm5vte and
build_arm_none_eabi_gcc_m0plus. It fails with
- error: implicit declaration of function
‘test_fail_if_psa_leaking’
It happens because test_fail_if_psa_leaking is defined in
helpers.function. This block of code is not converted into C code
while compiling ssl_helpers.c. The function has been moved to
psa_crypto_helpers.c in order to fix this build error.
Signed-off-by: Yanray Wang <yanray.wang@arm.com>
Since we move many functions from test_suite_ssl.function to
ssl_helpers.c in commit 8e2bbdd. This causes various of
build errors. This commit fixes all the build errors by
- including header files
- providing function definition
- adding guards for typedef statements and functions
Signed-off-by: Yanray Wang <yanray.wang@arm.com>
With this change, the renamed typedef statements (commit de3caee)
are moved from test_suite_ssl.function into ssl_helpers.h
Signed-off-by: Yanray Wang <yanray.wang@arm.com>
test_suite_ssl.function contains many functions that are used to set
up a TLS connection. To reduce its file size, those functions would
be moved to ssl_helpers.c under tests/src. As the start of this
implementation, some necessary header files are moved in advance.
Signed-off-by: Yanray Wang <yanray.wang@arm.com>
- Add `alg` and `computation_stage` to `psa_pake_operation_s`.
Now when logic is moved to core information about `alg` is required.
`computation_stage` is a structure that provides a union of computation stages for pake algorithms.
- Move the jpake operation logic from driver to core. This requires changing driver entry points for `psa_pake_output`/`psa_pake_input` functions and adding a `computation_stage` parameter. I'm not sure if this solution is correct. Now the driver can check the current computation stage and perform some action. For jpake drivers `step` parameter is now not used, but I think it needs to stay as it might be needed for other pake algorithms.
- Removed test that seems to be redundant as we can't be sure that operation is aborted after failure.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
When including <test/bignum_helpers.h>, the library/ directory now needs to
be on the include path.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move bignum-related helper functions to their own files under tests/include
and tests/src. The primary motivation is that a subsequent commit will make
bignum_helpers.h include library/bignum*.h, but we want to be able to
include <test/helpers.h> without having the library directory on the include
path (we do this in some programs under programs/ intended for testing).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When testing under Valgrind for constant flow, skip test suites that don't
have any constant-flow annotations, since the testing wouldn't do anything
more that testing with ordinary Valgrind (component_test_valgrind and
component_test_valgrind_psa). This is a significant time saving since
testing with Valgrind is very slow.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The bignum module does not officially support "negative zero" (an
mbedtls_mpi object with s=-1 and all limbs zero). However, we have a
history of bugs where a function that should produce an official
zero (with s=1), produces a negative zero in some circumstances. So it's
good to check that the bignum functions are robust when passed a negative
zero as input. And for that, we need a way to construct a negative zero
from test case arguments.
There are checks that functions don't produce negative zeros as output in
the test suite. Skip those checks if there's a negative zero input: we
don't want functions to _create_ negative zeros, but we don't mind if
they _propagate_ negative zeros.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add component_test_psa_config_accel_ecdh to all.sh to test key agreement driver wrapper with libtestdriver1.
Signed-off-by: Aditya Deshpande <aditya.deshpande@arm.com>
Test functions must now take a char* argument rather than data_t*. This does
not affect existing test data.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is done to have LIBTESTDRIVER1_MBEDTLS_PSA_BUILTIN_ALG_CHACHA20_POLY1305 defined in libtestdriver1.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
This comment (which used to be attached to the implementation, and should
not have been moved to the header file) is incorrect: the library function
mbedtls_mpi_read_string preserves leading zeros as desired, but does not
create a zero-limb object for an empty string.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
(1) Add in driver jsons.
(2) Improve Python scripts to take JSON file directory and template
directory paths as arguments.
(3) Add in file augment template files to template common functionality
(4) render tempplates for Header files, ID generation and key
management.
(5) Changed driver ID nomenclature to be in synch with function names.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Signed-off-by: Asfandyar Orakzai <asfandyar.orakzai@silabs.com>
We used to include platform.h only when MBEDTLS_PLATFORM_C was enabled, and
to define ad hoc replacements for mbedtls_xxx functions on a case-by-case
basis when MBEDTLS_PLATFORM_C was disabled. The only reason for this
complication was to allow building individual source modules without copying
platform.h. This is not something we support or recommend anymore, so get
rid of the complication: include platform.h unconditionally.
There should be no change in behavior since just including the header should
not change the behavior of a program.
This commit replaces most occurrences of conditional inclusion of
platform.h, using the following code:
```
perl -i -0777 -pe 's!#if.*\n#include "mbedtls/platform.h"\n(#else.*\n(#define (mbedtls|MBEDTLS)_.*\n|#include <(stdarg|stddef|stdio|stdlib|string|time)\.h>\n)*)?#endif.*!#include "mbedtls/platform.h"!mg' $(git grep -l '#include "mbedtls/platform.h"')
```
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Previously MD_C was auto-enabled based on the fact that ALG_RSA_PSS was
requested, but that's no longer the case since the previous commit.
We can fix this in one of two ways: either enable MD_C, or enable all
the PSA_WANT_ALG_SHA_xxx that are needed for test. Go for MD_C because
it's a single line and avoids having to enumerate a list that might grow
in the future.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Test assertions for integer comparisons that display the compared values on
failure. Similar to TEST_EQUAL.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
As PSA signatures rely on built-in hash implementations
(cannot take an advantage of an accelerator for the
time being), chose an available built-in hash for
tests exercising a signature key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The current testing of the PSA configuration is
based on test code located in the library itself.
Remove this code as we are moving to using a
test library instead.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This commit removes the test_psa_crypto_config_basic
all.sh component that can no longer work without
adapting it to the separately compiled test driver
library. This component is replaced by several
components in the following commits to test various
type of acceleration independently.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
PR #3959 has proven that by adding a prefix
(LIBTESTDRIVER1/libtestdriver1_ in this commit) to
all MBEDTLS/PSA_* and mbedtls/psa_* symbols of a copy
of the Mbed TLS library, we can build a library that
can be linked with the Mbed TLS library.
This commit leverages this to build a PSA test driver
library based on the Mbed TLS library code.
The cryptographic features supported by the test
library are defined by:
. a minimal configuration (in the sense of config.h),
see config_test_driver.h
. PSA_WANT_* and PSA_ACCEL_* defined macros.
The PSA_WANT_* macros have to be the same as the ones
used to build the Mbed TLS library the test driver
library is supposed to be linked to as the PSA_WANT_*
macros are used in the definition of structures and
macros that are shared by the PSA crypto core,
Mbed TLS drivers and the driver test library.
The PSA_ACCEL_* macros are intended to define the
cryptographic features that have to be removed
from the Mbed TLS library and thus supported by the
test library in test scenarios. The PSA_ACCEL_* macros
to build the test library are thus mirrored from the
ones to build the Mbed TLS library by extended the
crypto_config.h: see
crypto_config_test_driver_entension.h.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rename test driver entry points to
libtestdriver1_<name of the Mbed TLS entry point>.
This aligns with the renaming of all Mbed TLS APIs
for the test driver library (that will be put in place
in the following commits) to avoid name conflicts
when linking it with the Mbed TLS library.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of the driver test entry points to be
provided by a test driver library, move their prototypes
to tests directory.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When TEST_EQUAL fails, show the two numerical values in the test log (only
with host_test). The values are printed in hexa and signed decimal.
The arguments of TEST_EQUAL must now be integers, not pointers or floats.
The current implementation requires them to fit in unsigned long long
Signed values no larger than long long will work too. The implementation
uses unsigned long long rather than uintmax_t to reduce portability
concerns. The snprintf function must support "%llx" and "%lld".
For this purpose, add room for two lines of text to the mbedtls_test_info
structure. This adds 154 bytes of global data.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Also fiixed the following merge problems:
crypto_struct.h : Added MBEDTLS_PRIVATE to psa_aead_operation_s
members (merge conflict)
psa_crypto_aead.c : Added ciphertext_length to mbedtls_gcm_finish
call (change of API during development)
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
A minimal test driver extension is added to support
copy of opaque keys within the same location.
Test vector support is extended to cover opaque keys.
Signed-off-by: Archana <archana.madhavan@silabs.com>
-Add test driver support to import/export while wrapping keys
meant to be stored in the PSA core as opaque( emulating an
SE without storage ).
-Export validate_unstructured_key_bit_size as
psa_validate_unstructured_key_bit_size, thereby changing its scope.
-Improve the import/export test cases in test_suite_psa_crypto to also
cover opaque keys, thereby avoiding duplication.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Also remove preprocessor logic for MBEDTLS_CONFIG_FILE, since
build_info.h alreadyy handles it.
This commit was generated using the following script:
# ========================
#!/bin/sh
git ls-files | grep -v '^include/mbedtls/build_info\.h$' | xargs sed -b -E -i '
/^#if !?defined\(MBEDTLS_CONFIG_FILE\)/i#include "mbedtls/build_info.h"
//,/^#endif/d
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
This test helper reads an MPI from a string and guarantees control over the
number of limbs of the MPI, allowing test cases to construct values with or
without leading zeros, including 0 with 0 limbs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Conflicts:
include/mbedtls/ssl.h
include/psa/crypto_struct.h
Conflicts fixed by using the code from development branch
and manually re-applying the MBEDTLS_PRIVATE wrapping.
If a fallback is not explicitly configured in the
mbedtls_test_rnd_buf_info structure, fail after the buffer is
exhausted.
There is no intended behavior change in this commit: all existing uses
of mbedtls_test_rnd_buffer_rand() have been updated to set
mbedtls_test_rnd_std_rand as the fallback.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove tests related to NULL pointers,
keep tests related to invalid enum values.
Remove test code related to MBEDTLS_CHECK_PARAMS.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Signed-off-by: TRodziewicz <tomasz.rodziewicz@mobica.com>
Public structs members are considered private and should not
be used by users application.
MBEDTLS_PRIVATE(member) macro is intended to clearly indicate
which members are private.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Move the key buffer size calculation code under
tests to avoid check-names.sh to complain about
"likely macros with typos".
This removes the calculation of key buffer
sizes for the test driver from the wrapper based on
static size data. But the code is still there in test
code to be used when we go back to work on the
generation of the driver wrapper.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The macro always meant 'location', but was mistakenly named 'lifetime'.
Naming it location instead makes much more sense, and drives home the
conceptual differences between location and lifetime values.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Builtin key support for the test driver is always compiled in, and no
longer guarded by MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS.
Parsing the key slot from the buffer by cast and assign instead of memcmp.
For exporting keys, the test driver no longer reaches into the key
identifier in order to check whether a key is builtin, but rather
assumes so based on the key buffer length. It's the driver's
responsibility to be able to detect the key material it returned as part
of the get_builtin_key operation.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
As part of test_psa_crypto_drivers, define a builtin symmetric
plus an ECC key on the test driver lifetime.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
