Adds two comments to clarify 1) why an offset is used
in the call to psa_aead_verify() and 2) why the test of
.hits_finish is always 0 in this test case.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
For multipart encrpytion, call psa_cipher_finish(). This is not actually
necessary for non-pathological implementations of ECB (the only currently
supported IV-less cipher algorithm) because it requires the input to be a
whole number of blocks and non-pathological implementations emit the output
block from update() as soon as an input block is available. But in principle
a driver could delay output and thus require a call to finish().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Validate the size macros directly from the output length in the test data,
rather than using the value returned by the library. This is equivalent
since the value returned by the library is checked to be identical.
Enforce that SIZE() <= MAX_SIZE(), in addition to length <= SIZE(). This is
stronger than the previous code which merely enforced length <= SIZE() and
length <= MAX_SIZE().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Motivated by CVE-2022-21449, to which we're not vulnerable, but we
didn't have a test for it. Now we do.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
We test some configurations using drivers where the driver doesn't
support certain hash algorithms, but declares that it supports
compound algorithms that use those hashes. Until this is fixed,
in those configurations, don't try to actually perform operations.
The built-in implementation of asymmetric algorithms that use a
hash internally only dispatch to the internal md module, not to
PSA. Until this is supported, don't try to actually perform
operations when the operation is built-in and the hash isn't.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
remove use of MBEDTLS_SSL_MINOR_VERSION_*
remove use of MBEDTLS_SSL_MAJOR_VERSION_*
(only remaining use is in tests/suites/test_suite_ssl.data)
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Store the TLS version in tls_version instead of major, minor version num
Note: existing application use which accesses the struct member
(using MBEDTLS_PRIVATE) is not compatible, as the struct is now smaller.
Reduce size of mbedtls_ssl_ciphersuite_t
members are defined using integral types instead of enums in
order to pack structure and reduce memory usage by internal
ciphersuite_definitions[]
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Store the TLS version in tls_version instead of major, minor version num
Note: existing application use which accesses the struct member
(using MBEDTLS_PRIVATE) is not compatible on little-endian platforms,
but is compatible on big-endian platforms. For systems supporting
only TLSv1.2, the underlying values are the same (=> 3).
New setter functions are more type-safe,
taking argument as enum mbedtls_ssl_protocol_version:
mbedtls_ssl_conf_max_tls_version()
mbedtls_ssl_conf_min_tls_version()
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Store the TLS version instead of minor version number in tls_version.
Note: struct member size changed from unsigned char to uint16_t
Due to standard structure padding, the structure size does not change
unless alignment is 1-byte (instead of 2-byte or more)
Note: existing application use which accesses the struct member
(using MBEDTLS_PRIVATE) is compatible on little-endian platforms,
but not compatible on big-endian platforms. The enum values for
the lower byte of MBEDTLS_SSL_VERSION_TLS1_2 and of
MBEDTLS_SSL_VERSION_TLS1_3 matches MBEDTLS_SSL_MINOR_VERSION_3 and
MBEDTLS_SSL_MINOR_VERSION_4, respectively.
Note: care has been taken to preserve serialized session format,
which uses only the lower byte of the TLS version.
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Ensure that the nominal run works properly, so that it's apparent that the
injected failure is responsible for the failure of the handshake.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
USE_PSA_DONE() already checks that there are no used key slots.
The call to TEST_ASSERT() wouldn't have worked properly on failure anyway,
since it would jump back to the exit label.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
The timing module might include time.h on its own when on
a suitable platform, even if MBEDTLS_HAVE_TIME is disabled.
Co-authored-by: Tom Cosgrove <tom.cosgrove@arm.com>
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Similar to the previous commit, this commit removes
the word 'multi-part' from the encrypt setup tests.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
After other changes had taken place the call to
PSA_ASSERT( psa_get_key_attributes( key, &attributes ) )
was no longer needed.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
For weistrass curves the pair is encoded as 0x04 || x || y.
Flipping one of the bits in the first byte should be a sure failure.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Force a bitflip in server key to make the raw key
agreement fail, and then verify that no key slots
are left open at the end. Use a Weierstrass curve
to have a high chance of failure upon encountering
such bitflip.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
This commit alters an ASSERT_COMPARE statement
at the end of the aead_encrypt_setup test. This is to
correct a mistake introduced by the preceding PR.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
This commit adds the required changes that arose from
the first round of reviewing. The total_input_data argument
has been removed and so the .data file needed to be edited
also.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Adds test data for the test case where the insufficient
memory error is forced on the driver status.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit adds test data for the case where the
algorithm is not supported by the driver but
the fallback option is available in the library.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Otherwise the error status can be PSA_ERROR_INVALID_SIGNATURE instead of the
expected PSA_ERROR_NOT_SUPPORTED in some configurations. For example, the
RSA verification code currently checks the signature size first whenever
PSA_KEY_TYPE_RSA_PUBLIC_KEY is enabled, and only gets into
algorithm-specific code if this passes, so it returns INVALID_SIGNATURE even
if the specific algorithm is not supported.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
They're redundant with the automatically generated test cases, but it's
useful to have them when debugging issues with the test code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit adds tests data for the encrypt setup function
to cover the case where there is insufficent memory when
trying to undertake the operation.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit adds test data needed to test the case where driver
does not support selected algorithm but the library does.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
This commit adds a test called aead_encrypt_setup()
which tests that the relevant drivers get called the correct
amount of times when running the multipart AEAD encrypt
setup API.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
This implies that when both TLS 1.2 and TLS 1.3
are included in the build all the TLS 1.2 tests
using the default configuration now go through
a version negotiation on the client side.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
To be compatible with the other functions `mbedtls_psa_hkdf_extract` and
`mbedtls_psa_hkdf_expand` use hash algorithm for parameter.
Signed-off-by: Gabor Mezei <gabor.mezei@arm.com>
- parameter name in function description
- test_suite_ecp.data: add new line at the end of file
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
The test suite test_suite_psa_crypto_op_fail now runs a large number
of automatically generated test cases which attempt to perform a
one-shot operation or to set up a multi-part operation with invalid
parameters. The following cases are fully covered (based on the
enumeration of valid algorithms and key types):
* An algorithm is not supported.
* The key type is not compatible with the algorithm (for operations
that use a key).
* The algorithm is not compatible for the operation.
Some test functions allow the library to return PSA_ERROR_NOT_SUPPORTED
where the test code generator expects PSA_ERROR_INVALID_ARGUMENT or vice
versa. This may be refined in the future.
Some corner cases with algorithms combining a key agreement with a key
derivation are not handled properly. This will be fixed in follow-up
commits.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test that hash operation functions fail when given a hash algorithm
that is not supported or an algorithm that is not a hash.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The new test suite psa_crypto_op_fail is intended for systematically
generated test cases that ensure that cryptographic operations with
invalid parameters fail as expected. I intend invalid parameters to
cover things like an invalid algorithm, an algorithm that is
incompatible with the operation, a key type that is incompatible with
the algorithm, etc.
This commit just creates the infrastructure. Subsequent commits will
add data generation and test code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
CCM*-no-tag is currently available whenever CCM is, so declare
PSA_WANT_ALG_CCM_STAR_NO_TAG whenever PSA_WANT_ALG_CCM is declared and vice
versa.
Fix dependencies of test cases that use PSA_ALG_CCM_STAR_NO_TAG: some were
using PSA_WANT_ALG_CCM and some had altogether wrong dependencies.
This commit does not touch library code. There is still no provision for
providing CCM support without CCM*-no-tag or vice versa.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The PSA Crypto API uses 0 as the initial counter value, but the test vector
in RFC 7539 uses 1. So the unit tests here include an extra leading block.
The expected data for this leading block was calculated with Cryptodome.
#!/usr/bin/env python3
import re
from Cryptodome.Cipher import ChaCha20
key = bytes.fromhex('000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f')
nonce = bytes.fromhex('000000000000004a00000000')
encrypt = lambda pt: ChaCha20.new(key=key, nonce=nonce).encrypt(pt)
# Cryptodome uses counter=0, like PSA Crypto. Prepend a 64-byte input block #0
# so that the plaintext from RFC 7539 starts exactly at block #1.
header = b'The RFC 7539 test vector uses counter=1, but PSA uses counter=0.'
assert(len(header) == 64)
sunscreen = b"Ladies and Gentlemen of the class of '99: If I could offer you only one tip for the future, sunscreen would be it."
plaintext = header + sunscreen
zeros = b'\x00' * len(plaintext)
keystream = encrypt(zeros)
ciphertext = encrypt(plaintext)
print('RFC 7539 §2.4.2')
print('Keystream:')
print(re.sub(r'(..)', r'\1:', keystream[64:].hex()))
print('Ciphertext Subscreen:')
print(re.sub(r'(..)', r'\1 ', ciphertext[64:].hex()))
print('')
print(f"""\
PSA symmetric decrypt: ChaCha20, RFC7539 keystream
depends_on:PSA_WANT_ALG_STREAM_CIPHER:PSA_WANT_KEY_TYPE_CHACHA20
# Keystream from RFC 7539 §2.4.2, with an extra 64-byte output block prepended
# because the test vector starts at counter=1 but our API starts at counter=0.
cipher_decrypt:PSA_ALG_STREAM_CIPHER:PSA_KEY_TYPE_CHACHA20:"{key.hex()}":"{nonce.hex()}":"{zeros.hex()}":"{keystream.hex()}"
PSA symmetric decrypt: ChaCha20, RFC7539 sunscreen
depends_on:PSA_WANT_ALG_STREAM_CIPHER:PSA_WANT_KEY_TYPE_CHACHA20
# Test vector from RFC 7539 §2.4.2, with an extra 64-byte block prepended
# because the test vector starts at counter=1 but our API starts at counter=0.
cipher_decrypt:PSA_ALG_STREAM_CIPHER:PSA_KEY_TYPE_CHACHA20:"{key.hex()}":"{nonce.hex()}":"{ciphertext.hex()}":"{plaintext.hex()}"
""")
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
* Remove expected_output_data: since asymmetric encryption is randomized,
it can't be useful.
* The decryption check needs the private exponent, not the public exponent.
* Use PSA macro for the expected ciphertext buffer size.
* Move RSA sanity checks to their own function for clarity.
* For RSAES-PKCS1-v1_5, check that the result of the private key operation
has the form 0x00 0x02 ... 0x00 M where M is the plaintext.
* For OAEP, check that the result of the private key operation starts with
0x00. The rest is the result of masking which it would be possible to
check here, but not worth the trouble of implementing.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add a call to `mbedtls_md_starts()` in the `mbedtls_md_process()`
test, as it violates the API usage. Fixes#2227.
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
The X509write x509_csr_check reference file depends on
mbedtls_test_rnd_pseudo_rand being used to match the pre-generated data.
This calls x509_crt_verifycsr() like in x509_csr_check_opaque() when
MBEDTLS_USE_PSA_CRYPTO is defined.
Notably using PSA_ALG_DETERMINISTIC_ECDSA() in ecdsa_sign_wrap() makes
this test run without these changes.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
The pk_rsa_encrypt_test_vec() reference vector is calculated while using
mbedtls_test_rnd_pseudo_rand rng source, but since the RNG souce can't
be controlled when USE_PSA_CRYPTO is enabled we can't get the same
result.
The pk_rsa_encrypt_test_vec() fails when switching to mbedtls_test_rnd_std_rand
as rng source.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
The test is based on the AEAD multi-part test, re-using the
design on aead_multipart_internal_func() to test differnet
sequence of psa_mac_update() for MAC update or verify.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Extend mbedtls_ssl_set_hs_own_cert() to reset handshake cert list
if cert provided is null. Previously, mbedtls_ssl_set_hs_own_cert()
only provided a way to append to the handshake certificate list,
without providing a way to replace the handshake certificate list.
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
Make `PSA symetric decrypt: CCM*-no-tag, input too short (15 bytes)`
depend on MBEDTLS_CCM_C otherwise the multi-part test fails on
the missing CCM* instead on the input length validity for CCM*.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Encryption is not deterministic and can not be verified by a know-answer test.
Encryption is already verified via encrypt-decrypt test.
Signed-off-by: Przemyslaw Stekiel <przemyslaw.stekiel@mobica.com>
Add accessors to mbedtls_ssl_context: user data, version
ABI-API-checking fails which was expected as this PR adds a new field in mbedtls_ssl_context and mbedtls_ssl_config.
Testing the hash length in this context is not applicable because there is no way
to specify it when calling mbedtls_psa_hkdf_extract.
Change to test invalid `alg` parameter.
Signed-off-by: Gabor Mezei <gabor.mezei@arm.com>
The user data is typically a pointer to a data structure or a handle which
may no longer be valid after the session is restored. If the user data needs
to be preserved, let the application do it. This way, it is a conscious
decision for the application to save/restore either the pointer/handle
itself or the object it refers to.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit alters the relevant .data files
such that the new function name change of check_iv
to iv_len_validity is relfected there.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit changes name of check_iv to
iv_len_validity as this seems to better describe
its functionality.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Duplicate a test case but with a different expected error
due to error translation to and from PSA.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Currently all cases were negative, so the block that exercised
mbedtls_pem_get_der() would never be reached.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
