Expected output generated by OpenSSL (see below) apart from the case
where both password and salt are either NULL or zero length, as OpenSSL
does not support this. For these test cases we have had to use our own
output as that which is expected. Code to generate test cases is as
follows:
#include <openssl/pkcs12.h>
#include <openssl/evp.h>
#include <string.h>
int Keygen_Uni( const char * test_name, unsigned char *pass, int
passlen, unsigned char *salt,
int saltlen, int id, int iter, int n,
unsigned char *out, const EVP_MD
*md_type )
{
size_t index;
printf( "%s\n", test_name );
int ret = PKCS12_key_gen_uni( pass, passlen, salt, saltlen, id, iter,
n, out, md_type );
if( ret != 1 )
{
printf( "Key generation returned %d\n", ret );
}
else
{
for( index = 0; index < n; ++index )
{
printf( "%02x", out[index] );
}
printf( "\n" );
}
printf( "\n" );
}
int main(void)
{
unsigned char out_buf[48];
unsigned char pass[64];
int pass_len;
unsigned char salt[64];
int salt_len;
/* If ID=1, then the pseudorandom bits being produced are to be used
as key material for performing encryption or decryption.
If ID=2, then the pseudorandom bits being produced are to be
used as an IV (Initial Value) for encryption or decryption.
If ID=3, then the pseudorandom bits being produced are
to be used as an integrity key for MACing.
*/
int id = 1;
int iter = 3;
memset( out_buf, 0, sizeof( out_buf ) );
memset( pass, 0, sizeof( pass ) );
memset( salt, 0, sizeof( salt ) );
Keygen_Uni( "Zero length pass and salt", pass, 0, salt, 0, id, iter,
sizeof(out_buf),
out_buf, EVP_md5( ) );
memset( out_buf, 0, sizeof( out_buf ) );
Keygen_Uni( "NULL pass and salt", NULL, 0, NULL, 0, id, iter,
sizeof(out_buf),
out_buf, EVP_md5( ) );
memset( out_buf, 0, sizeof( out_buf ) );
salt[0] = 0x01;
salt[1] = 0x23;
salt[2] = 0x45;
salt[3] = 0x67;
salt[4] = 0x89;
salt[5] = 0xab;
salt[6] = 0xcd;
salt[7] = 0xef;
Keygen_Uni( "Zero length pass", pass, 0, salt, 8, id, iter,
sizeof(out_buf),
out_buf, EVP_md5( ) );
memset( out_buf, 0, sizeof( out_buf ) );
Keygen_Uni( "NULL pass", NULL, 0, salt, 8, id, iter, sizeof(out_buf),
out_buf, EVP_md5( ) );
memset( out_buf, 0, sizeof( out_buf ) );
memset( salt, 0, sizeof( salt ) );
pass[0] = 0x01;
pass[1] = 0x23;
pass[2] = 0x45;
pass[3] = 0x67;
pass[4] = 0x89;
pass[5] = 0xab;
pass[6] = 0xcd;
pass[7] = 0xef;
Keygen_Uni( "Zero length salt", pass, 8, salt, 0, id, iter,
sizeof(out_buf),
out_buf, EVP_md5( ) );
memset( out_buf, 0, sizeof( out_buf ) );
Keygen_Uni( "NULL salt", pass, 8, NULL, 0, id, iter, sizeof(out_buf),
out_buf, EVP_md5( ) );
memset( out_buf, 0, sizeof( out_buf ) );
salt[0] = 0x01;
salt[1] = 0x23;
salt[2] = 0x45;
salt[3] = 0x67;
salt[4] = 0x89;
salt[5] = 0xab;
salt[6] = 0xcd;
salt[7] = 0xef;
Keygen_Uni( "Valid pass and salt", pass, 8, salt, 8, id, iter,
sizeof(out_buf),
out_buf, EVP_md5( ) );
return 0;
}
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Can't call mbedtls_cipher_free(&invalid_ctx) in cleanup if
mbedtls_cipher_init(&invalid_ctx) hasn't been called.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
As we have now a minimal viable implementation of TLS 1.3,
let's remove EXPERIMENTAL from the config option enabling
it.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add dependencies on built-in hash of signature/
signature verification and asymmetric
encryption/decryption tests. The dependency is
not added for tests based on SHA-256 as SHA-256
is always present when PSA is involved (necessary
to the PSA core) and that way most of PSA signature
/verification tests are still run when PSA hash
operations are accelerated.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add non regression test for invalid usage of
the output buffer in psa_cipher_encrypt().
The output buffer should not be used to pass
the IV to the driver as a local attacker could
be able to control the used IV.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add non regression test for invalid usage of
the output buffer in psa_cipher_generate_iv().
The output buffer should not be used to pass
the IV to the driver as a local attacker could
be able to control the used IV.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Under gcc11(+) both message and received would cause errors for
potentially being used uninitialised. We fixed many of these issues in
another PR, but this one is only seen under certain configs.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
At least twice, we added a classification flag but forgot to test it in the
relevant test functions. Add some protection so that this doesn't happen
again. In each classification category, put a macro xxx_FLAG_MASK_PLUS_ONE
at the end. In the corresponding test function, keep track of the flags that
are tested, and check that their mask is xxx_FLAG_MASK_PLUS_ONE - 1 which is
all the bits of the previous flags set.
Now, if we add a flag without testing it, the test
TEST_EQUAL( classification_flags_tested, xxx_FLAG_MASK_PLUS_ONE - 1 )
will fail. It will also fail if we make the set of flag numbers
non-consecutive, which is ok.
This reveals that three algorithm flags had been added but not tested (in
two separate occasions). Also, one key type flag that is no longer used by
the library was still defined but not tested, which is not a test gap but is
inconsistent. It's for DSA, which is relevant to the PSA encoding even if
Mbed TLS doesn't implement it, so keep the flag and do test it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The status of signature wildcards with respect to PSA_ALG_IS_HASH_AND_SIGN
is unclear in the specification. A wildcard is usually instantiated with a
specific hash, making the implementation hash-and-sign, but it could also be
instantiated with a non-hash-and-sign algorithm. For the time being, go with
what's currently implemented, which is that they are considered
hash-and-sign.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The current definition of PSA_ALG_IS_HASH_AND_SIGN includes
PSA_ALG_RSA_PKCS1V15_SIGN_RAW and PSA_ALG_ECDSA_ANY, which don't strictly
follow the hash-and-sign paradigm: the algorithm does not encode a hash
algorithm that is applied prior to the signature step. The definition in
fact encompasses what can be used with psa_sign_hash/psa_verify_hash, so
it's the correct definition for PSA_ALG_IS_SIGN_HASH. Therefore this commit
moves definition of PSA_ALG_IS_HASH_AND_SIGN to PSA_ALG_IS_SIGN_HASH, and
replace the definition of PSA_ALG_IS_HASH_AND_SIGN by a correct one (based
on PSA_ALG_IS_SIGN_HASH, excluding the algorithms where the pre-signature
step isn't to apply the hash encoded in the algorithm).
In the definition of PSA_ALG_SIGN_GET_HASH, keep the condition for a nonzero
output to be PSA_ALG_IS_HASH_AND_SIGN.
Everywhere else in the code base (definition of PSA_ALG_IS_SIGN_MESSAGE, and
every use of PSA_ALG_IS_HASH_AND_SIGN outside of crypto_values.h), we meant
PSA_ALG_IS_SIGN_HASH where we wrote PSA_ALG_IS_HASH_AND_SIGN, so do a
global replacement.
```
git grep -l IS_HASH_AND_SIGN ':!include/psa/crypto_values.h' | xargs perl -i -pe 's/ALG_IS_HASH_AND_SIGN/ALG_IS_SIGN_HASH/g'
```
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Only tested for algorithms for which we support HMAC, since that's all we
use PSA_HASH_BLOCK_LENGTH for at the moment.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It was unmaintained and untested, and the fear of breaking it was holding us
back. Resolves#4934.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
digits is also a local variable in host_test.function, leading to compilers
complaining about that shadowing the global variable in
test_suite_base64.function.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is part of the definition of the encoding, not a choice of test
parameter, so keep it with the test code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add unit tests for mask_of_range(), enc_char() and dec_value().
When constant-flow testing is enabled, verify that these functions are
constant-flow.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Genertae test_suite_psa_crypto_generate_key.generated.data.
Use test_suite_psa_crypto_generate_key.function as a test function.
Signed-off-by: Przemyslaw Stekiel <przemyslaw.stekiel@mobica.com>
When TEST_EQUAL fails, show the two numerical values in the test log (only
with host_test). The values are printed in hexa and signed decimal.
The arguments of TEST_EQUAL must now be integers, not pointers or floats.
The current implementation requires them to fit in unsigned long long
Signed values no larger than long long will work too. The implementation
uses unsigned long long rather than uintmax_t to reduce portability
concerns. The snprintf function must support "%llx" and "%lld".
For this purpose, add room for two lines of text to the mbedtls_test_info
structure. This adds 154 bytes of global data.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
PSA_ALG_RSA_PSS algorithm now accepts only the same salt length for
verification that it produces when signing, as documented.
Fixes#4946.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test the following combinations:
* 1024-bit key, SHA-256, salt=0
* 1024-bit key, SHA-256, salt=31 (1 byte shorter than standard)
* 1024-bit key, SHA-256, salt=32 (standard length)
* 1024-bit key, SHA-256, salt=94 (maximum possible length)
* 1024-bit key, SHA-512, salt=61 (1 byte shorter than standard)
* 1024-bit key, SHA-512, salt=62 (standard = maximum possible length)
* 528-bit key, SHA-512, salt=0 (only possible length)
Test psa_verify_hash() for both PSA_ALG_RSA_PSS and PSA_ALG_RSA_PSS_ANY_SALT
with all of these combinations. For psa_verify_message(), just test once
with the standard length and once with a different length.
Note that as of this commit, both PSA_ALG_RSA_PSS and
PSA_ALG_RSA_PSS_ANY_SALT accept any salt length during verification, hence
all the new test cases are positive.
The verify test cases were generated using the Python script below.
```
from Cryptodome import Hash
from Cryptodome.Hash import SHA512
from Cryptodome import PublicKey
from Cryptodome.PublicKey import RSA
from Cryptodome.Signature import pss
key = {
528: RSA.import_key(bytes.fromhex("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")),
1024: RSA.import_key(bytes.fromhex("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")),
}
hash_module = {
256: Hash.SHA256,
512: Hash.SHA512,
}
def print_test_case(remark, pub, kbits, hbits, input, output):
key_hex = pub.hex()
input_hex = input.hex()
output_hex = output.hex()
print(f"""\
PSA verify hash: RSA-{kbits} PSS SHA-{hbits}, {remark}
depends_on:PSA_WANT_ALG_RSA_PSS:PSA_WANT_ALG_SHA_{hbits}:PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY:MBEDTLS_PK_PARSE_C:MBEDTLS_MD_C
verify_hash:PSA_KEY_TYPE_RSA_PUBLIC_KEY:"{key_hex}":PSA_ALG_RSA_PSS(PSA_ALG_SHA_{hbits}):"{input_hex}":"{output_hex}"
PSA verify hash: RSA-{kbits} PSS-any-salt SHA-{hbits}, {remark}
depends_on:PSA_WANT_ALG_RSA_PSS:PSA_WANT_ALG_SHA_{hbits}:PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY:MBEDTLS_PK_PARSE_C:MBEDTLS_MD_C
verify_hash:PSA_KEY_TYPE_RSA_PUBLIC_KEY:"{key_hex}":PSA_ALG_RSA_PSS_ANY_SALT(PSA_ALG_SHA_{hbits}):"{input_hex}":"{output_hex}"
""")
def rand(n):
return bytes(x & 0xff for x in range(n))
def test_case(kbits, hbits, slen):
priv = key[kbits]
pub_spki = priv.publickey().export_key('DER')
pub_raw = PublicKey._expand_subject_public_key_info(pub_spki)[1]
hash_op = hash_module[hbits].new(b'abc')
digest = hash_op.copy().digest()
output = pss.new(priv, salt_bytes=slen, rand_func=rand).sign(hash_op)
print_test_case(f"slen={slen}", pub_raw, kbits, hbits, digest, output)
test_case(1024, 256, 0)
test_case(1024, 256, 31)
test_case(1024, 256, 32)
test_case(1024, 256, 94)
test_case(1024, 512, 61)
test_case(1024, 512, 62)
test_case(528, 512, 0)
```
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Ensure the unique part fits in the 66 columns that the test runner displays.
Leave room for an additional distinguisher on signature key policy negative
test cases.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The test cases strictly replicate a subset of the test cases for
PSA_ALG_RSA_PSS. The subset validates that PSA_ALG_RSA_PSS_ANY_SALT is
recognized wherever PSA_ALG_RSA_PSS is.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is a variant of PSA_ALG_RSA_PSS which currently has exactly the same
behavior, but is intended to have a different behavior when verifying
signatures.
In a subsequent commit, PSA_ALG_RSA_PSS will change to requiring the salt
length to be what it would produce when signing, as is currently documented,
whereas PSA_ALG_RSA_PSS_ANY_SALT will retain the current behavior of
allowing any salt length (including 0).
Changes in this commit:
* New algorithm constructor PSA_ALG_RSA_PSS_ANY_SALT.
* New predicates PSA_ALG_IS_RSA_PSS_STANDARD_SALT (corresponding to
PSA_ALG_RSA_PSS) and PSA_ALG_IS_RSA_PSS_ANY_SALT (corresponding to
PSA_ALG_RSA_PSS_ANY_SALT).
* Support for the new predicates in macro_collector.py (needed for
generate_psa_constant_names).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move GCM's update output buffer length verification
from PSA AEAD to the built-in implementation of the GCM.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
The requirement of minimum 15 bytes for output buffer in
psa_aead_finish() and psa_aead_verify() does not apply
to the built-in implementation of the GCM.
Alternative implementations are expected to verify the
length of the provided output buffers and to return
the MBEDTLS_ERR_GCM_BUFFER_TOO_SMALL in case the
buffer length is too small.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Only use PSA_ALG_AEAD_WITH_SHORTENED_TAG with the default tag length when
it's part of a series or when the tag length is a critical part of the test.
Don't use it when the tag length is secondary, to make the test data easier
to read.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
All function declaration provided by ssl_invasive.h is needed only for
testing purposes and all of them are provided by constant_time.h as well.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Declare all AES and DES functions that return int as needing to have
their result checked, and do check the result in our code.
A DES or AES block operation can fail in alternative implementations of
mbedtls_internal_aes_encrypt() (under MBEDTLS_AES_ENCRYPT_ALT),
mbedtls_internal_aes_decrypt() (under MBEDTLS_AES_DECRYPT_ALT),
mbedtls_des_crypt_ecb() (under MBEDTLS_DES_CRYPT_ECB_ALT),
mbedtls_des3_crypt_ecb() (under MBEDTLS_DES3_CRYPT_ECB_ALT).
A failure can happen if the accelerator peripheral is in a bad state.
Several block modes were not catching the error.
This commit does the following code changes, grouped together to avoid
having an intermediate commit where the build fails:
* Add MBEDTLS_CHECK_RETURN to all functions returning int in aes.h and des.h.
* Fix all places where this causes a GCC warning, indicating that our code
was not properly checking the result of an AES operation:
* In library code: on failure, goto exit and return ret.
* In pkey programs: goto exit.
* In the benchmark program: exit (not ideal since there's no error
message, but it's what the code currently does for failures).
* In test code: TEST_ASSERT.
* Changelog entry.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is no longer required, as both PolyChaCha and GCM now support
both chunked body data and additional data.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Also fiixed the following merge problems:
crypto_struct.h : Added MBEDTLS_PRIVATE to psa_aead_operation_s
members (merge conflict)
psa_crypto_aead.c : Added ciphertext_length to mbedtls_gcm_finish
call (change of API during development)
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Use the encoding from an upcoming version of the specification.
Add as much (or as little) testing as is currently present for Camellia.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Multipart decrypt now always expects positive result (i.e. the plaintext
that is passed in). Added new test that expects fail, and does no
multipart versions and concentrates on aead_verify.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Previous tests only tested when the expected lengths were set to zero.
New test sends all data/ad then goes over by one byte.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
i.e Check correct buffer size +1 and correct buffer size -1 (where
applicable) to check too big and too small cases, and hopefully catch
edge cases.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Ensure that the test actually does something, rather than skipping both
parts, also add comment to this effect.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Fix opaque key test vector dependency to PSA_CRYPTO_DRIVER_TEST
instead of MBEDTLS_PSA_CRYPTO_DRIVERS while validating with
test drivers.
Signed-off-by: Archana <archana.madhavan@silabs.com>
A minimal test driver extension is added to support
copy of opaque keys within the same location.
Test vector support is extended to cover opaque keys.
Signed-off-by: Archana <archana.madhavan@silabs.com>
-Add test driver support to import/export while wrapping keys
meant to be stored in the PSA core as opaque( emulating an
SE without storage ).
-Export validate_unstructured_key_bit_size as
psa_validate_unstructured_key_bit_size, thereby changing its scope.
-Improve the import/export test cases in test_suite_psa_crypto to also
cover opaque keys, thereby avoiding duplication.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Add tests for passing incomplete input data in
the first call and too much data in the second call.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
We previously had tests for not sending enough (additional) data, but
were missing tests for sending too much. I have added these to the state
tests, as I don't think this is complex enough to deserve a standalone
test.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Most supported ciphers have a 128-bit, 192-bit or 256-bit keys. List the
exceptions explicitly.
This commit fixes a test failure with the null cipher and an incorrect
comment that omitted several key lengths.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add functions to read the type, mode, name and key_bitlen fields from
mbedtls_cipher_info_t. These are the fields that applications are most
likely to care about.
TLS code also uses iv_size and block_size, which it might make sense to
expose, but most applications shouldn't need those, so I'm not exposing them
for now.
Call the new functions in unit tests, so they're at least smoke-tested.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Conflicts:
library/ccm.c
Conflict resolved by re-applying the MBEDTLS_BYTE_0 macro.
Conflict resolved by ignoring the MBEDTLS_PUT_UINT16_BE macro
used in development branch on the 'b' buffer, because the 'b'
buffer is removed in current branch.
The psa_open_key API depends on MBEDTLS_PSA_CRYPTO_STORAGE_C.
This is unnecessary for builtin keys and so is fixed.
Updated an open_fail test vector keeping with the same.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Add the missing nonce length checks (this function is being used by
oneshot functions as well as multipart, and thus all cipher suites are
being used) and cover the case where a NULL buffer gets passed in.
Extended the set nonce test to cover this.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Cover:
- not calling auth data update
- not calling cipher text update
- exceeding configured auth data length
- exceeding configured cipher text length
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Before `mbedtls_ssl_setup`, config functions should
be called. Without it, `mbedtls_ssl_setup` will raise
invalid value error.
Change-Id: I46fdaa5e8eb83d06c620087a9e1e7e14e1c5d9b5
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
Still check that encryption and decryption are inverse to each other
if the granularity does not match the one used in the KAT.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
This commit adds four known answer tests for TLS 1.3 record protection
from the following sources:
- RFC 8448 "Example Handshake Traces for TLS 1.3"
- tls13.ulfheim.net "The New Illustrated TLS Connection"
It extends the test coverage of the existing record protection tests
in the following ways:
- The existing record protection tests hand-craft record transform
structures; the new tests use the function
mbedtls_ssl_tls13_populate_transform()
from library source to create an TLS 1.3 transform from raw
key material and connection information.
- The existing record protection tests only check that encryption
and decryption are inverse to each other; as such, they don't
catch non-compliant implementations of encryption and decryption
which happen to be inverse to each other. By adding a known answer
test for TLS 1.3 record protection, can gain confidence that our
implementation is indeed standards-compliant.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Instances of `mbedtls_ssl_session` represent data enabling session resumption.
With the introduction of TLS 1.3, the format of this data changes. We therefore
need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish
1.2 and 1.3 sessions.
This commit introduces such a TLS-version field to mbedtls_ssl_session.
The change has a few ramifications:
- Session serialization/deserialization routines need to be adjusted.
This is achieved by adding the TLS-version after the header of
Mbed TLS version+config, and by having the subsequent structure
of the serialized data depend on the value of this field.
The details are described in terms of the RFC 8446 presentation language.
The 1.2 session (de)serialization are moved into static helper functions,
while the top-level session (de)serialization only parses the Mbed TLS
version+config header and the TLS-version field, and dispatches according
to the found version.
This way, it will be easy to add support for TLS 1.3 sessions in the future.
- Tests for session serialization need to be adjusted
- Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3,
we will need to have some logic comparing the TLS version of the proposed session
to the negotiated TLS version. For now, however, we only support TLS 1.2,
and no such logic is needed. Instead, we just store the TLS version in the
session structure at the same point when we populate mbedtls_ssl_context.minor_ver.
The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and
`mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved.
However, with both fields being private and explicitly marked so, this can happen
in a later change.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Previous test in state test was not actually making sure that the
operatioon could be completed using set lengths / set nonce in either
order, thus changed the 'normal' encrypt / decrypt tests to run in
alternating order.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Make all encrypt/decrypt tests use the same function. Cleanup arguments
that were poorly named and document internal function. Removed one test
as I didn't want to write another test purely for it, when its already
tested in one shot.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Previously the check was convoluted. This has been simplified
and given a more appropriate suggestion as per gilles suggestion
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Call the output size macros specifically with asymmetric keys, which
would cause a crash (and thus test fail) should this fix get regressed.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
This file had temporary MBEDTLS_xxx dependencies because it was created when
support for PSA_WANT_xxx was still incomplete. Switch to the PSA_WANT_xxx
dependencies
This fixes the bug that "PSA storage read: AES-GCM+CTR" was never executed
because there was a typo in a dependency.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
* Add tests to validate MSB not ok for Curve25519 and
Curve448.
* Add a test to generate key for for Curve448.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Enable Curve448 support
Add test vectors to evaluate
* RFC 7748
* a known-answer public key export test.
* a known-answer ECDH (X448) test.
Signed-off-by: Archana <archana.madhavan@silabs.com>
mbedtls_ecp_read_key and mbedtls_ecp_write_key are updated to include
support for Curve448 as prescribed by RFC 7748 §5.
Test suites have been updated to validate curve448 under Montgomery
curves.
Signed-off-by: Archana <archana.madhavan@silabs.com>
add space between bracket and a newline that had occured
through changes but do not match the original file style
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
The power 2 check now uses a looping bit shift to try match
with the block sizes and will escape the loop when appropriate
The test cases, as pointed out by Gilles, could be harmful in
the future and testing a test case is not generally necessary
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
tests/scripts/check_test_cases.py located duplicate descriptions
for the negative tests checking that the check fails when a block
size is not a power of 2
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Add a check to ensure the block_size is or is not a power of 2
Add a new parameter to verify the expected pass/fail when a block_size
is or is not a power of 2.
Add new sets of input data to verify these tests
Fixes#4228
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>