This is not new, it had always been the case, just not documented.
Pointed out by depends.py pkalgs (again, now that restartable is part of
full).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
muladd() (restartable or not) is only available when at least one short
weirstrass curve is enabled.
Found by depends.py curves (now that restartable is part of full).
Also, document that restartable only work for short weierstrass curves
(actually unrelated, but this made me think of that).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The previous commit declared that some tests cases in ssl-opt.sh depend
on USE_PSA being disabled, which is the right thing to do.
We had a check that forbade that - it was mainly meant to prevent
accidental re-introduction of such dependencies after we cleaned up a
number of cases where it was not warranted, but already at the time that
was controversial [1]. Now it's preventing us from doing the right
thing, so let's just remove it.
[1]: https://github.com/Mbed-TLS/mbedtls/pull/5742#discussion_r855112412
See also https://github.com/Mbed-TLS/mbedtls/pull/5907/ which also
removes this for a similar reason.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This fixes the two failures in test_suite_x509parse when both
ECP_RESTARTABLE and USE_PSA_CRYPTO are enabled.
The failure happened because the operation is dispatched to PSA when
restart is disabled (max_ops == 0).
Previously it was correct for this test function not to initialize PSA,
because it depends on ECP_RESTARTABLE which used to conflict with
USE_PSA_CRYPTO, but that's no longer the case.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The random-in-nrange test code has auxiliary functions that are common to all
the interfaces (core, mod_raw (upcoming), mod (upcoming), legacy), and does
some differential testing to check that all the layers consume the RNG in
the saame way. Test them all in the same test suite.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Run the main test suites after running code style correction to check
that code style correction does not break these tests.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
It might not be obvious that this option goes beyond adding new
functions, but also automagically modifies the behaviour of TLS
in some circumstances. Moreover, the exact modifications and
circumstances were not documented anywhere outside the ChangeLog.
Fix that.
While at it, adjust the test that checks no restartable behaviour with
other key exchanges, to use a key exchange that allows cert-based client
authentication so that we can check that this is not restartable either.
We don't have any automated test checking that the server is never
affected. That would require adding an ec_max_ops command-line option to
ssl_server2 that never has any effect, just to check that it indeed
doesn't. I'm not sure that's worth it. I tested manually and could
confirm that the server never has restartable behaviour, even for the
parts that are shared between client and server such as cert chain
verification.
Note (from re-reading the code): all restartable behaviour is controlled
by the flag ssl->handshake->ecrs_enabled which is only client-side with
the ECDHE-ECDSA key exchange (TLS 1.2).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Test some cases where mbedtls_mpi_core_random() or mbedtls_mpi_random()
should return MBEDTLS_ERR_MPI_NOT_ACCEPTABLE. These test cases use a very
small range that makes the NOT_ACCEPTABLE case likely. The test code uses a
deterministic RNG whose implementation is in the test framework, so we know
that the tests will pass reproducibly unless the implementation the test
framework changes.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The test function mpi_random_many() is the main function for testing the
get-random-in-range function. It validates that the random generator's
output is within the desired range, and performs some basic statistical
checks including checking that small ranges are covered exhaustively.
Switch this function from testing mbedtls_mpi_random() to testing
mbedtls_mpi_core_random(). This does not reduce the test coverage of
mbedtls_mpi_random() because the same properties are now validated
indirectly via mpi_random_values() which checks that mbedtls_mpi_random()
and mbedtls_mpi_core_random() produce identical values for identical inputs.
As of this commit, mpi_random_many() still uses some legacy mpi functions
internally because the corresponding functions don't exist yet in core.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
For good cases, test that mbedtls_mpi_random() produces the same output as
mbedtls_mpi_core_random().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Compare a single-limb MPI with a multi-limb MPI. This is rather ad hoc, but
will be useful for mbedtls_mpi_core_random.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Added mixed cases:
- server using opaque password, while client not
- client using opaque password, while server not
Added a test with mismatched passwords in case both server and
client are using opaque passwords (the same test was already
present for the non-opaque case)
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This is already covered by other already existing cases such as
"component_test_full_cmake_gcc_asan" which build with
"config.py full" and run all "ssl-opt.sh" test cases.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The commit "Preserve line breaks in comments before test functions"
only handled block comments. This commit handles line comments.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When testing under Valgrind for constant flow, skip test suites that don't
have any constant-flow annotations, since the testing wouldn't do anything
more that testing with ordinary Valgrind (component_test_valgrind and
component_test_valgrind_psa). This is a significant time saving since
testing with Valgrind is very slow.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is the first step in arranging that functions from constant_time.c are
tested in test_suite_constant_time.function.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
These are very CPU-intensive, so make it easy to skip them. And conversely,
make it easy to run them without the growing body of SSL tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
All builds using ASAN_CFLAGS were with Asan but no optimisation, making
them particularly slow. Indeed, we were overwriting CFLAGS which
defaults to -O2 and not using any -O in the replacement. (CMake already has
optimisations on with ASan.)
While at it, also remove -Wall -Wextra which are redundant as they are
already part of WARNING_CFLAGS which we are not overwriting.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
If the variable SKIP_TEST_SUITES is not defined with -D, but is defined
in an environment variable, tell cmake to get it from there.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Require equality for the number of limbs in the modulus and the residue.
This makes these functions consistent with residue_setup().
Signed-off-by: Janos Follath <janos.follath@arm.com>
The value was overwritten and the length wasn't used either. This latter
could have lead to a buffer overflow as well.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Test macros have goto instructions to the end where everything is freed.
We need to call init before that happens to make calling free functions
safe.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The external representation before included more than just endianness
(like reading in Mongtomery curve scalars or converting hashes to
numbers in a standard compliant way).
These are higher level concepts and are out of scope for Bignum and for
the modulus structure.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The external representation before included more than just endianness
(like reading in Mongtomery curve scalars or converting hashes to
numbers in a standard compliant way).
These are higher level concepts and are out of scope for Bignum and for
the modulus structure.
Passing endianness as a parameter is a step towards removing it from the
modulus structure.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The external representation before included more than just endianness
(like reading in Mongtomery curve scalars or converting hashes to
numbers in a standard compliant way).
These are higher level concepts and are out of scope for Bignum and for
the modulus structure.
Passing endianness as a parameter is a step towards removing it from the
modulus structure.
Signed-off-by: Janos Follath <janos.follath@arm.com>
In theory we could allow residues to have more allocated limbs than the
modulus, but we might or might not need it in the end.
Go for the simpler option for now and we can extend it later if we
really need it.
Signed-off-by: Janos Follath <janos.follath@arm.com>
We want to make sure that the value has at least as many limbs allocated
as the modulus as we need this to be able to do any operations in
constant time.
An invariant of the API is that the residue values are canonical, make
sure that the residue is compared to the entire modulus.
Signed-off-by: Janos Follath <janos.follath@arm.com>
This patch adjusts the I/O methods and the tests.
Documentation has also been updated to be more clear.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch adjusts the logic of the size checking of the method,
and refactors the tests. Documentation has also been updated.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch is inverting the input type checking logic in the method,
in order to ensure that residue < modulus.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch adds the following tests for the high levet IO api:
* mpi_mod_io_neg
* mpi_mod_io
Manually generated test data has also been included.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
CID is now enabled in the default config (as well as full), so it's
already tested in numerous all.sh components, not need to add one for
that.
We need a component for the legacy/compat option though as it's never
enabled in existing components. So, keep that one, but adjust the name
and fix a typo in a message.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
We don't need to have two copies of the test with one of them depending
on legacy/compat CID: we can have just one copy, but make sure we run
ssl-opt.sh both in a build with standard CID and in a build with
legacy/compat - that's the job of all.sh (see next commit).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Per suggestion from Manuel, I removed this redundant test.
Signed-off-by: Hannes Tschofenig <hannes.tschofenig@arm.com>
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Added also extra text.
Signed-off-by: Hannes Tschofenig <hannes.tschofenig@arm.com>
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
OpenSSL may be configured to support features such as cipher suites or
protocol versions that are disabled by default. Enable them all: we're
testing, we don't care about enabling insecure stuff. This is not needed
with the builds of OpenSSL that we're currently using on the Jenkins CI, but
it's needed with more recent versions such as typically found on developer
machines, and with future CI additions.
The syntax to do that was only introduced in OpenSSL 1.1.0; fortunately we
don't need to do anything special with earlier versions.
With OpenSSL 1.1.1f on Ubuntu 20.04, this allows SHA-1 in certificates,
which is still needed for a few test cases in ssl-opt.sh. Curiously, this is
also needed for the cipher suite TLS-DHE-PSK-WITH-ARIA-128-GCM-SHA256 (and
no other, including other DHE-PSK or ARIA cipher suites).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
psa_cipher_encrypt() and psa_cipher_decrypt() sometimes add a zero offset to
a null pointer when the cipher does not use an IV. This is undefined
behavior, although it works as naively expected on most platforms. This
can cause a crash with modern Clang+ASan (depending on compiler optimizations).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The test cases aim to mirror the legacy function, but needed the some
cases to be removed because:
- Null representation is not valid in core
- There are no negative numbers in core
- Bignum core doesn't do parameter checking and there are no promises for
even N
The _size variant of the test has been removed as bignum core doesn't do
parameter checking and there is no promises for inputs that are larger
than MBEDTLS_MPI_MAX_SIZE.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Now that we have a function that calls
mbedtls_mpi_core_ct_uint_table_lookup(), the compiler won't complain if
we make it static.
Signed-off-by: Janos Follath <janos.follath@arm.com>
- external errors are now checked in the specified point. If the
same error happens in another line, then this is not valid and
the test fails
- fixed some inconsistency in which injected error codes were not
taken from the data file. Now all the expected error code are
read from the data file
- added a couple of defines to shrink the code
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
As for ecjpake_setup(), now the test function can handle:
- "external" errors, through parameters set by the data file
- "internal" ones, through enums which inject ad-hoc failures
Similarly also ecjpake_rounds() can handle both type of errors,
but right now there's no erroneous case in the associated ".data"
file.
In both cases, after an error the current test is terminated.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Eventually we want it to be enabled by default
when TLS 1.3 is enabled but currently the
feature is on development thus it should not be
enabled by default.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Normally we need all the combinations, unique combinations make sense
only if the operation is commutative.
No changes to generated tests.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The class BaseTarget served two purposes:
- track test cases and target files for generation
- provide an abstract base class for individual test groups
Splitting these allows decoupling these two and to have further common
superclasses across targets.
No intended change in generated test cases.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Add a test case that would fail if all line comments were parsed before
block comments, and a test case that would fail if all block comments were
parsed before line comments.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The value of the first sent signature algorithm is overwritten.
This test forces only a single algorithm to be sent and then
validates that the client received such algorithm.
04 03 is the expected value for SECP256R1_SHA256.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Now when operation holds pointer to dynamically allocated buffer for password key we can't do copy of the operation object in test instead we need to re-initialize operation object after error.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
Looking for the .data file doesn't work in out-of-tree builds. Use the
.datax file instead. `make clean` removes all .datax files, so this resolves
the issue of executables not present on the current branch being left behind
after a branch change followed by a `make clean`.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When x is the most negative value of a two's complement type,
`(unsigned_type)(-x)` has undefined behavior, whereas `-(unsigned_type)x`
has well-defined behavior and does what was intended.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Although negative zero is officially unsupported, we've had bugs related to
it in the past. So do test functions with a negative zero input.
There will likely be cases where we don't want to accept negative zero as if
it was valid, because it's too hard to handle. We'll add exceptions on a
case by case basis.
For the functions that are currently tested by the generated tests, the new
test cases pass.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The bignum module does not officially support "negative zero" (an
mbedtls_mpi object with s=-1 and all limbs zero). However, we have a
history of bugs where a function that should produce an official
zero (with s=1), produces a negative zero in some circumstances. So it's
good to check that the bignum functions are robust when passed a negative
zero as input. And for that, we need a way to construct a negative zero
from test case arguments.
There are checks that functions don't produce negative zeros as output in
the test suite. Skip those checks if there's a negative zero input: we
don't want functions to _create_ negative zeros, but we don't mind if
they _propagate_ negative zeros.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is to ensure that the MbedTLS based implementation of EC-JPAKE
is compatible with the PSA crypto one
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The already existing "x509_csr_check()" function is extended in order
to support/test also CSR's extensions. The test is performed by
adding an extended key usage.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Add fields to mbedtls_ssl_context
Add write early data indication function
Add check whether write early data indication
Add early data option to ssl_client2
Add test cases for early data
Signed-off-by: Xiaokang Qian <xiaokang.qian@arm.com>
Fix error in memory allocation in test code, which was triggering an
error in test_memory_buffer_allocator.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
A core MPI must have at least 1 limb. We can no longer test with 0 limbs,
and we don't need to anyway, so don't try.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This way static analyzers have a chance of knowing we don't expect the
bignum functions to support empty inputs. As things are, Coverity keeps
complaining about it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Instead of corrupting the public key part of the message,
corrupt the proof part. A proof is conceptually similar to a signature,
and changing anything in it should make it invalid with
a high probability.
Also, instead of shifting data, perform a bitflip.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
The PSA_CRYPTO_C is excluded from typo check for the following
false negative report:
```
> include/mbedtls/check_config.h:329: 'PSA_CRYPTO_C' looks like a typo. It
was not found in any macros or any enums. If this is not a typo, put //no-
check-names after it.
|
329 | * Note: ECJPAKE_C depends on MD_C || PSA_CRYPTO_C. */
| ^^^^^^^^^^^^
```
Signed-off-by: Pengyu Lv <pengyu.lv@arm.com>
This macro is expected to be defined out of the library, and there
is no definition in the library. Thus it needs to be excluded from
typo check.
Signed-off-by: Pengyu Lv <pengyu.lv@arm.com>
Typos of PSA macro and enum names are not checked by check_names.py.
This commit extend the check list to include PSA_XXX references.
The words should be macro/enum names defined as public_macros,
internal_macros, private_macros and enums. This commit alse extend
the scope of enums to include those are defined in library/*.c.
A new type of macros "private", which are defined in library/*.c was
also added.
Signed-off-by: Pengyu Lv <pengyu.lv@arm.com>
Add component_test_psa_config_accel_ecdh to all.sh to test key agreement driver wrapper with libtestdriver1.
Signed-off-by: Aditya Deshpande <aditya.deshpande@arm.com>
Looking for executables causes problems with leftover compiled test
suites from other branches when we forget to run make clean before
switching branches. Using the .data files is more robust as most of them
are tracked, so will be removed when switching branches.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
For the benefit of auto-formatting tools, move from the '$placeholder'
templating syntax to a new syntax of the form:
__MBEDTLS_TEST_TEMPLATE__PLACEHOLDER
This change allows the test code template to be almost entirely valid C.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Windows tests are failing pkcs7 verification due to differnt line
endings. Therefore, add make instuctions for building the data
files with Windows EOF instead. As a result, regenerate other data
files so that verification works.
Add these CRLF EOF files to the exception in check_files to ignore
the line endings.
Signed-off-by: Nick Child <nick.child@ibm.com>
Legacy Bignum is excluded as it doesn't get regular extensions like new
ones.
Each slot uses comments of their respective filetype. Since .data files
don't have a syntax for comments, dummy test cases are used. (These test
cases will never be executed and no noise will be added to tests.)
Signed-off-by: Janos Follath <janos.follath@arm.com>
I ran into a sequence where the assertion `stats[8] > 0` failed for the
range 1..272 with 100 iterations.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Turn mpi_fill_random_internal() into mbedtls_mpi_core_fill_random(). It
had basically the right code except for how X is passed to the function.
Write unit tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
* component_test_tls13_with_padding: just explicitly sets some options that
are identical with full.
* component_test_tls13_with_ecp_restartable: redundant since TLS 1.3 doesn't
have any support for restartable ECC.
* component_test_tls13_with_everest: not useful since TLS 1.3 doesn't call
ECDH directly, it just relies on the PSA abstraction.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
component_build_psa_accel_alg_ecdsa is subsumed by
component_test_psa_crypto_config_accel_ecdsa, which has the same
configuration and additionally runs the unit tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
MBEDTLS_TEST_HOOKS is not supposed to change the behavior of the library, so
it's generally good to have it on in functional tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This patch updates the tests `mpi_mod_raw_cond_swap()` &
`mpi_mod_raw_cond_assign()` to use a non-zero modulus
when invoking `mbedtls_mpi_mod_modulus_setup()`
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch addresses more review comments, and fixes
a circular depedency in the `mbedtls_mpi_mod_modulus_setup()`.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch addresses review comments with regards to style of
`mbedtls_mpi_mod_modulus_setup/free()`.
It also removes a test check which was triggering a use-after-free.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch updates the `mpi_mod_setup()` test suite
to check for incosistencies in the montgomery constant
data's lifecycle.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
Ensure MBEDTLS_SSL_DTLS_CONNECTION_ID and MBEDTLS_SSL_DTLS_CONNECTION_ID_COMPAT
are unset when MBEDTLS_SSL_PROTO_DTLS is not set in tls13-only tests.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
Also remove compat tests from reference component as results from this run are not included in outcome file.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
Ensure MBEDTLS_SSL_DTLS_CONNECTION_ID_COMPAT is unset where
MBEDTLS_SSL_DTLS_CONNECTION_ID is unset.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
Use a dictionary to specify optional parameters for each task.
If the task is not specified then all tasks are executed.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
curves.pl, depends-hashes.pl, key-exchanges.pl and depends-pkalgs.pl are now superseded by depends.py.
Update all references to them accordingly.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
It's not needed as a feature. It gets reenabled automatically in
build_info.h like pk_write and pk_parse, but that's an implementation
detail.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In the PSK exchange modes extension declare first
PSK ephemeral if we support both PSK ephemeral
and PSK. This is aligned with our implementation
giving precedence to PSK ephemeral over pure PSK
and improve compatibility with GnuTLS.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This patch moves the following tests to test_suite_bignum_core:
* `mbedtls_mpi_core_get_mont_r2_unsafe_neg()`
* `mbedtls_mpi_core_get_mont_r2_unsafe()`
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch adds the test for the method calculating the RR. The input/expected
data are generated manually using the following Python3 snippet:
~~~~~
import math
title="mpi_get_montgomery_constant_unsafe"
tt = title + " #{}"
in_data = [ "0f", ... ]
def limb_no(number, bil=64):
return int(math.ceil(int.bit_length(number)/(bil * 1.0)))
def calc_rr(number, bil=64 ):
return '{:x}'.format(pow(pow(2, limb_no(number, bil) * bil), 2, number))
def calc_rr_str(number, prefix=""):
rr64 = calc_rr(number)
rr32 = calc_rr(number, bil=32)
return '{}:"{:x}":"{}":"{}"'.format(prefix,number, rr32, rr64)
print("\n\n".join(["{}\n{}".format(tt.format(in_data.index(v)+1), calc_rr_str(int(v,base=16), title)) for v in in_data]))
~~~~~
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
Simplify TLS 1.3 dependencies taking into
account that
MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
implies that MBEDTLS_SSL_PROTO_TLS1_3 is
defined.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Remove requires_key_exchange_with_cert_in_tls12_enabled
and use `requires_any_configs_enabled` directly instead.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
