Ensure platforms that don't have an assembly implementation for
mbedtls_get_unaligned_volatile_uint32() don't experience a performance
regression.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
This path updates the clean-up logic of to individually
free each of the the group's structure members
rather than invoke `mbedtls_ecp_group_free()`.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch adjusts the logic, so that the method is included,
when the following components are enabled:
* MBEDTLS_ECP_DP_CURVE448_ENABLED
* MBEDTLS_ECP_DP_CURVE25519_ENABLED
* ECP_LOAD_GROUP
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch updates the method to not free the `grp->P`
and `grp->N` structure members.
The contents of `P` and `N` are stored in static memory at
`curve448_p/n` and `curve25519p/n` and no longer dynamically
allocated.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch adds two embedded constants used by `ecp_use_curve448()`.
The method has been updated to read that into an mpi instead of
calculating it on the fly.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch adds two embedded constants used by `ecp_use_curve25519()`.
The method has been updated to read that into an mpi instead of
calculating it on the fly.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
The key derivation algorithm PSA_ALG_TLS12_ECJPAKE_TO_PMS cannot be
used on a shared secret from a key agreement since its input must be
an ECC public key. Reject this properly.
This is tested by test_suite_psa_crypto_op_fail.generated.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In some contexts, the output pointer may equal the first input
pointer, in which case copying is not only superfluous but results in
"Source and destination overlap in memcpy" errors from Valgrind (as I
observed in the context of ecp_double_jac) and a diagnostic message
from TrustInSoft Analyzer (as Pascal Cuoq reported in the context of
other ECP functions called by cert-app with a suitable certificate).
Signed-off-by: Aaron M. Ucko <ucko@ncbi.nlm.nih.gov>
When ticket_flags used as parameter, use unsigned int,
instead of uint8_t or mbedtls_ssl_tls13_ticket_flags.Also
remove the definition of mbedtls_ssl_tls13_ticket_flags.
Signed-off-by: Pengyu Lv <pengyu.lv@arm.com>
Return MBEDTLS_ERR_ERROR_GENERIC_ERROR when ticket_flags
are not compatible with advertised key exchange mode.
Signed-off-by: Pengyu Lv <pengyu.lv@arm.com>
Ticket flags is quite generic and may make sense in the
future versions of TLS or even in TLS 1.2 with new
extensions. This change remane the ticket_flags helper
functions with more generic `mbedtls_ssl_session` prefix
instead of `mbedtls_ssl_tls13_session`.
Signed-off-by: Pengyu Lv <pengyu.lv@arm.com>
Handshake parameter field, tls13_kex_mode is only valid when
MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_SOME_PSK_ENABLED is set.
So, any functions / calls should be guarded by this macros.
Signed-off-by: Pengyu Lv <pengyu.lv@arm.com>
Move the kex mode check in ticket_flags to
ssl_tls13_offered_psks_check_identity_match_ticket and add new error
'MBEDTLS_ERR_SSL_TICKET_INVALID_KEX_MODE' to indicate the check
failure.
Signed-off-by: Pengyu Lv <pengyu.lv@arm.com>
The server check if the ticket_flags is compatible with the advertised
key exchange modes in Pre-Shared Key Exchange Modes extension. The
incompatible ticket should be mark as not matched.
Signed-off-by: Pengyu Lv <pengyu.lv@arm.com>
- added 2 new certificates: 1 for testing a serial which is full lenght
and another one for a serial which starts with 0x80
- added also proper Makefile and openssl configuration file to generate
these 2 new certificates
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
- enhance mbedtls_x509write_crt_set_serial(): avoid use of useless
temporary buffer
- fix mbedtls_x509write_crt_der(): add an extra 0x00 byte at the
beginning of serial if the MSb of serial is 1, as required from
ASN.1
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
As some static functions are only used inside ssl_tls13_keys.c,
the prefix mbedtls_ should be removed. Furthermore, code format is
also maintained to fix code style.
Signed-off-by: Yanray Wang <yanray.wang@arm.com>
Since some functions are only used in ssl_tls13_keys.c not by any
other modules, those functions are changed to static.
Signed-off-by: Yanray Wang <yanray.wang@arm.com>
Since tls13_early_secrets is only temperately used in the function,
there is no need to keep it in the handshake context.
Signed-off-by: Yanray Wang <yanray.wang@arm.com>
We're including psa/crypto_values.h, which defines the necessary error
codes. Remove redundant definitions, which hurt because they need to be
styled in exactly the same way (same presence/absence of spaces between
tokens).
This completes the fix of https://github.com/Mbed-TLS/mbedtls/issues/6875.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move the *INDENT-ON* annotation to the end of the file so that
uncrustify does not restyle the later sections (since it introduces a
risk of future problems).
Signed-off-by: David Horstmann <david.horstmann@arm.com>
The inline assembly defined in bn_mul.h confuses code style parsing,
causing code style correction to fail. Disable code style correction for
the whole section gated by "#if defined(MBEDTLS_HAVE_ASM)" to prevent
this.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Some PSA curves' symbols (PSA_WANT_) were not matching the corresponding
MBEDTLS_ECP_DP_. This was fixed together with the removal of extra code
when DEBUG_C is not enabled.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The following code:
#ifndef asm
#define asm __asm
#endif
causes Uncrustify to stop correcting the rest of the file. This may be
due to parsing the "asm" keyword in the definition.
Work around this by wrapping the idiom in an *INDENT-OFF* comment
wherever it appears.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Used to be private, hence the duplication, but that's been fixed in the
meantime, I guess we just missed this occurrence.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
mbedtls_mpi_mod_raw_random() and mbedtls_mpi_mod_random() were producing
output in the Montgomery representation, instead of obeying the
representation chosen in the modulus structure. Fix this.
Duplicate the test cases for mod-random output to have separate test cases
for each representation.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Call mbedtls_mpi_mod_raw_canonical_to_modulus_rep instead of assuming that
anything that isn't MBEDTLS_MPI_MOD_REP_MONTGOMERY is canonical.
mbedtls_mpi_mod_write should get the same treatment, but I'm holding off
until https://github.com/Mbed-TLS/mbedtls/issues/6679 is done.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In the basic/XXX=core test cases, use odd upper bounds, because the mod
version of random() only supports odd upper bounds (the upper bound is a
modulus and the mod modules only support odd moduli).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Using proper configuration options (i.e. MBEDTLS_SHA224_C and
MBEDTLS_SHA256_C) it is now possible to build SHA224 and SHA256
independently from each other.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This is meant to adapt to the new library design in which
SHA384 and SHA512 can be built independently from each other.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Using proper configuration options (i.e. MBEDTLS_SHA384_C and
MBEDTLS_SHA512_C) it is now possible to build SHA384 and SHA512
independently from each other.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This fixes the two failing cases in test_suite_pk when ECP_RESTARTABLE
and USE_PSA_CRYPTO are both enabled. The two failing cases where
ECDSA restartable sign/verify: ECDSA, max_ops=0 (disabled)
ECDSA restartable sign/verify: ECKEY, max_ops=0 (disabled)
associated with test function pk_sign_verify_restart(). The failure was
caused by the interaction of several things that are each reasonable on
their own:
1. The test function relies on ECDSA restartable, which is reasonable as it
allows making sure that the generated signature is correct with a simple
memcmp().
2. The implementation of pk_sign_restartable() has a shortcut to
dispatch to the sign function (as opposed to sign_restartable) when
restart is disabled (max_ops == 0).
3. When USE_PSA is enabled, the sign function dispatches to PSA, which
so far always used ECDSA (non-deterministic) even when the non-PSA
version would use deterministic ECDSA.
This could be fixed by changing any of those. I chose (3) because I
think it makes sense that when PK dispatches to PSA instead of legacy
this should not change which version of ECDSA is selected.
OTOH, I think it makes sense to keep (2), because that means more
opportunities to dispatch to PSA.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
- disable reuse of max_early_data_size.
- make conf_early_data available for server.
- various comment issues
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
Shuffle things around a bit inside mbedtls_mpi_random() in preparation for
breaking out mbedtls_mpi_core_random().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rewrite the minimum bound comparison to avoid a local allocation. This costs
a bit of code size, but saves RAM. This is in preparation for moving the
bulk of the function to the bignum_core module where allocation is not
permitted.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Compare a single-limb MPI with a multi-limb MPI. This is rather ad hoc, but
will be useful for mbedtls_mpi_core_random.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This may have been a use-after-free, but I haven't worked out whether it was
a problem or not. Even if it turns out to have been ok, keeping invalid
pointers around is fragile.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Require equality for the number of limbs in the modulus and the residue.
This makes these functions consistent with residue_setup().
Signed-off-by: Janos Follath <janos.follath@arm.com>
The function isn't documented as accepting null pointer, and there's no
reason why it should be. Just let it dereference the pointer.
The null/zero checks are only marginally useful: they validate that m
and r are properly populated objects, not freshly initialized ones. For
that, it's enough to check that the pointers aren't null or that the
sizes aren't zero, we don't need to check both.
Also, use separate if statements for unrelated checks.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The external representation before included more than just endianness
(like reading in Mongtomery curve scalars or converting hashes to
numbers in a standard compliant way).
These are higher level concepts and are out of scope for Bignum and for
the modulus structure.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The external representation before included more than just endianness
(like reading in Mongtomery curve scalars or converting hashes to
numbers in a standard compliant way).
These are higher level concepts and are out of scope for Bignum and for
the modulus structure.
Passing endianness as a parameter is a step towards removing it from the
modulus structure.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The external representation before included more than just endianness
(like reading in Mongtomery curve scalars or converting hashes to
numbers in a standard compliant way).
These are higher level concepts and are out of scope for Bignum and for
the modulus structure.
Passing endianness as a parameter is a step towards removing it from the
modulus structure.
Signed-off-by: Janos Follath <janos.follath@arm.com>
In theory we could allow residues to have more allocated limbs than the
modulus, but we might or might not need it in the end.
Go for the simpler option for now and we can extend it later if we
really need it.
Signed-off-by: Janos Follath <janos.follath@arm.com>
We want to make sure that the value has at least as many limbs allocated
as the modulus as we need this to be able to do any operations in
constant time.
An invariant of the API is that the residue values are canonical, make
sure that the residue is compared to the entire modulus.
Signed-off-by: Janos Follath <janos.follath@arm.com>
This patch adjusts the I/O methods and the tests.
Documentation has also been updated to be more clear.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch adjusts the logic of the size checking of the method,
and refactors the tests. Documentation has also been updated.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch is inverting the input type checking logic in the method,
in order to ensure that residue < modulus.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch adds input and ouput fucntions in the `bignum_mod` layer.
The data will be automatically converted between Cannonical and
Montgomery representation if required.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
When legacy CID is enabled at compile time, but not used at runtime, we
would incorrectly skip the sequence number at the beginning of the AAD.
There was already two "else" branches for writing the sequence number
but none of them was taken in that particular case.
Simplify the structure of the code: with TLS 1.2 (we're already in that
branch), we always write the sequence number, unless we're using
standard CID.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
psa_cipher_encrypt() and psa_cipher_decrypt() sometimes add a zero offset to
a null pointer when the cipher does not use an IV. This is undefined
behavior, although it works as naively expected on most platforms. This
can cause a crash with modern Clang+ASan (depending on compiler optimizations).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Larger height (e.g. H=20) trees cannot be put on the stack.
Allocate memory for them based on need using mbedtls_calloc().
Signed-off-by: Moritz Fischer <moritzf@google.com>
The loop ends when there are no more bits to process, with one twist: when
that happens, we need to clear the window one last time. Since the window
does not start empty (E_limbs==0 is not supported), the loop always starts
with a non-empty window and some bits to process. So it's correct to move
the window clearing logic to the end of the loop. This lets us exit the loop
when the end of the exponent is reached.
It would be clearer not to do the final window clearing inside the loop, so
we wouldn't need to repeat the loop termination condition (end of exponent
reached) inside the loop. However, this requires duplicating the code to
clear the window. Empirically, this causes a significant code size increase,
even if the window clearing code is placed into a function.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We are looking at the exponent at limb granularity and therefore
exponent bits can't go below 32.
The `mpi_` prefix is also removed as it is better not to have prefix at
all than to have just a partial. (Full prefix would be overly long and
would hurt readability.)
Signed-off-by: Janos Follath <janos.follath@arm.com>
Now that we have a function that calls
mbedtls_mpi_core_ct_uint_table_lookup(), the compiler won't complain if
we make it static.
Signed-off-by: Janos Follath <janos.follath@arm.com>
On platforms with size_t different from int, mismatch between size_t and
mpi_uint can cause incorrect results or complaints from the compiler.
Signed-off-by: Janos Follath <janos.follath@arm.com>
mpi_core_exp_mod: Cast local variable explicitly
Signed-off-by: Janos Follath <janos.follath@arm.com>
In this way, in case of error, it is not possible to continue using
the same psa_pake_operation_t without reinitializing it.
This should make the PSA pake's behavior closer to what expected by
the specification
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The first half of the table is not used, let's reuse index 0 for the
result instead of appending it in the end.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The table size was set before the configured window size bound was
applied which lead to out of bounds access when the configured window
size bound is less.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The window size starts giving diminishing returns around 6 on most
platforms and highly unlikely to be more than 31 in practical use cases.
Still, compilers and static analysers might complain about this and
better to be pedantic.
Co-authored-by: Gilles Peskine <gilles.peskine@arm.com>
Signed-off-by: Janos Follath <janos.follath@arm.com>
With small exponents (for example, when doing RSA-1024 with CRT, each
prime is 512 bits and we'll use wsize = 5 which may be smaller that the
maximum - or even worse when doing public RSA operations which typically
have a 16-bit exponent so we'll use wsize = 1) the usage of W will have
pre-computed values, then empty space, then the accumulator at the very
end.
Move X next to the precomputed values to make accesses more efficient
and intuitive.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Elements of W didn't all have the same owner: all were owned by this
function, except W[x_index]. It is more robust if we make a proper copy
of X.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Out of window zeroes were doing squaring on the output variable
directly. This leaks the position of windows and the out of window
zeroes.
Loading the output variable from the table in constant time removes this
leakage.
Signed-off-by: Janos Follath <janos.follath@arm.com>
