Extend the mbedtls_mpi_is_prime_det test to check that it reports
the number as prime when testing rounds-1 rounds, then reports the
number as composite when testing the full number of rounds.
When using a primality testing function the tolerable error rate depends
on the scheme in question, the required security strength and wether it
is used for key generation or parameter validation. To support all use
cases we need more flexibility than what the old API provides.
Primality tests have to deal with different distribution when generating
primes and when validating primes.
These new tests are testing if mbedtls_mpi_is_prime() is working
properly in the latter setting.
The new tests involve pseudoprimes with maximum number of
non-witnesses. The non-witnesses were generated by printing them
from mpi_miller_rabin(). The pseudoprimes were generated by the
following function:
void gen_monier( mbedtls_mpi* res, int nbits )
{
mbedtls_mpi p_2x_plus_1, p_4x_plus_1, x, tmp;
mbedtls_mpi_init( &p_2x_plus_1 );
mbedtls_mpi_init( &p_4x_plus_1 );
mbedtls_mpi_init( &x ); mbedtls_mpi_init( &tmp );
do
{
mbedtls_mpi_gen_prime( &p_2x_plus_1, nbits >> 1, 0,
rnd_std_rand, NULL );
mbedtls_mpi_sub_int( &x, &p_2x_plus_1, 1 );
mbedtls_mpi_div_int( &x, &tmp, &x, 2 );
if( mbedtls_mpi_get_bit( &x, 0 ) == 0 )
continue;
mbedtls_mpi_mul_int( &p_4x_plus_1, &x, 4 );
mbedtls_mpi_add_int( &p_4x_plus_1, &p_4x_plus_1, 1 );
if( mbedtls_mpi_is_prime( &p_4x_plus_1, rnd_std_rand,
NULL ) == 0 )
break;
} while( 1 );
mbedtls_mpi_mul_mpi( res, &p_2x_plus_1, &p_4x_plus_1 );
}
Functional tests for various payload sizes and output buffer sizes.
When the padding is bad or the plaintext is too large for the output
buffer, verify that function writes some outputs. This doesn't
validate that the implementation is time-constant, but it at least
validates that it doesn't just return early without outputting anything.
Add signing tests with 528-bit and 520-bit RSA keys with SHA-512. These
selections of key and hash size should lead to an error returned, as
there is not enough room for our chosen minimum salt size of two bytes
less than the hash size. These test the boundary around an available
salt length of 0 or -1 bytes.
The RSA keys were generated with OpenSSL 1.1.1-pre8.
$ openssl genrsa 520
Generating RSA private key, 520 bit long modulus (2 primes)
.............++++++++++++
.................++++++++++++
e is 65537 (0x010001)
-----BEGIN RSA PRIVATE KEY-----
MIIBPwIBAAJCANWgb4bludh0KFQBZcqWb6iJOmLipZ0L/XYXeAuwOfkWWjc6jhGd
B2b43lVnEPM/ZwGRU7rYIjd155fUUdSCBvO/AgMBAAECQgDOMq+zy6XZEjWi8D5q
j05zpRGgRRiKP/qEtB6BWbZ7gUV9DDgZhD4FFsqfanwjWNG52LkM9D1OQmUOtGGq
a9COwQIhD+6l9iIPrCkblQjsK6jtKB6zmu5NXcaTJUEGgW68cA7PAiENaJGHhcOq
/jHqqi2NgVbc5kWUD/dzSkVzN6Ub0AvIiBECIQIeL2Gw1XSFYm1Fal/DbQNQUX/e
/dnhc94X7s118wbScQIhAMPVgbDc//VurZ+155vYc9PjZlYe3QIAwlkLX3HYKkGx
AiEND8ndKyhkc8jLGlh8aRP8r03zpDIiZNKqCKiijMWVRYQ=
-----END RSA PRIVATE KEY-----
$ openssl genrsa 528
Generating RSA private key, 528 bit long modulus (2 primes)
.........++++++++++++
....++++++++++++
e is 65537 (0x010001)
-----BEGIN RSA PRIVATE KEY-----
MIIBQgIBAAJDAKJVTrpxW/ZuXs3z1tcY4+XZB+hmbnv1p2tBUQbgTrgn7EyyGZz/
ZkkdRUGQggWapbVLDPXu9EQ0AvMEfAsObwJQgQIDAQABAkJhHVXvFjglElxnK7Rg
lERq0k73yqfYQts4wCegTHrrkv3HzqWQVVi29mGLSXTqoQ45gzWZ5Ru5NKjkTjko
YtWWIVECIgDScqoo7SCFrG3zwFxnGe7V3rYYr6LkykpvczC0MK1IZy0CIgDFeINr
qycUXbndZvF0cLYtSmEA+MoN7fRX7jY5w7lZYyUCIUxyiOurEDhe5eY5B5gQbJlW
ePHIw7S244lO3+9lC12U1QIhWgzQ8YKFObZcEejl5xGXIiQvBEBv89Y1fPu2YrUs
iuS5AiFE64NJs8iI+zZxp72esKHPXq/chJ1BvhHsXI0y1OBK8m8=
-----END RSA PRIVATE KEY-----
Since we wish to generate RSASSA-PSS signatures even when hashes are
relatively large for the chosen RSA key size, we need some tests. Our
main focus will be on 1024-bit keys and the couple key sizes larger than
it. For example, we test for a signature generated using a salt length
of 63 when a 1032-bit key is used. Other tests check the boundary
conditions around other key sizes. We want to make sure we don't use a
salt length larger than the hash length (because FIPS 186-4 requires
this). We also want to make sure we don't use a salt that is too small
(no smaller than 2 bytes away from the hash length).
Test RSASSA-PSS signatures with:
- 1024-bit key and SHA-512 (slen 62)
- 1032-bit key and SHA-512 (slen 63)
- 1040-bit key and SHA-512 (slen 64)
- 1048-bit key and SHA-512 (slen 64)
The tests also verify that we can properly verify the RSASSA-PSS
signatures we've generated.
We've manually verified that OpenSSL 1.1.1-pre8 can verify the
RSASSA-PSS signatures we've generated.
$ openssl rsa -in rsa1024.pem -pubout -out pub1024.pem
writing RSA key
$ openssl rsa -in rsa1032.pem -pubout -out pub1032.pem
writing RSA key
$ openssl rsa -in rsa1040.pem -pubout -out pub1040.pem
writing RSA key
$ openssl rsa -in rsa1048.pem -pubout -out pub1048.pem
writing RSA key
$ cat message.bin | openssl dgst -sha512 -sigopt rsa_padding_mode:pss -sigopt rsa_pss_saltlen:62 -verify pub1024.pem -signature valid1024.bin
Verified OK
$ cat message.bin | openssl dgst -sha512 -sigopt rsa_padding_mode:pss -sigopt rsa_pss_saltlen:63 -verify pub1032.pem -signature valid1032.bin
Verified OK
$ cat message.bin | openssl dgst -sha512 -sigopt rsa_padding_mode:pss -sigopt rsa_pss_saltlen:64 -verify pub1040.pem -signature valid1040.bin
Verified OK
$ cat message.bin | openssl dgst -sha512 -sigopt rsa_padding_mode:pss -sigopt rsa_pss_saltlen:64 -verify pub1048.pem -signature valid1048.bin
Verified OK
We've also added a new test that ensures we can properly validate a
RSASSA-PSS 1032-bit signature with SHA-512 generated by OpenSSL. This
has been added as the "RSASSA-PSS Verify OpenSSL-generated Signature
1032-bit w/SHA-512" test. The signature to verify was generated with the
following command line.
$ cat message.bin | openssl dgst -sha512 -sigopt rsa_padding_mode:pss -sigopt rsa_pss_saltlen:63 -sign rsa1032.pem > valid.bin
The RSA private keys used by these tests were generated with OpenSSL
1.1.1-pre8.
$ openssl genrsa 1024
Generating RSA private key, 1024 bit long modulus (2 primes)
........................................++++++
......++++++
e is 65537 (0x010001)
-----BEGIN RSA PRIVATE KEY-----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-----END RSA PRIVATE KEY-----
$ openssl genrsa 1032
Generating RSA private key, 1032 bit long modulus (2 primes)
....................++++++
.................................++++++
e is 65537 (0x010001)
-----BEGIN RSA PRIVATE KEY-----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-----END RSA PRIVATE KEY-----
$ openssl genkey 1040
Generating RSA private key, 1040 bit long modulus
........++++++
........++++++
e is 65537 (0x10001)
-----BEGIN RSA PRIVATE KEY-----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-----END RSA PRIVATE KEY-----
$ openssl genrsa 1048
Generating RSA private key, 1048 bit long modulus (2 primes)
...............................++++++
.++++++
e is 65537 (0x010001)
-----BEGIN RSA PRIVATE KEY-----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-----END RSA PRIVATE KEY-----
It should be valid to RSASSA-PSS sign a SHA-512 hash with a 1024-bit or
1032-bit RSA key, but with the salt size being always equal to the hash
size, this isn't possible: the key is too small.
To enable use of hashes that are relatively large compared to the key
size, allow reducing the salt size to no less than the hash size minus 2
bytes. We don't allow salt sizes smaller than the hash size minus 2
bytes because that too significantly changes the security guarantees the
library provides compared to the previous implementation which always
used a salt size equal to the hash size. The new calculated salt size
remains compliant with FIPS 186-4.
We also need to update the "hash too large" test, since we now reduce
the salt size when certain key sizes are used. We used to not support
1024-bit keys with SHA-512, but now we support this by reducing the salt
size to 62. Update the "hash too large" test to use a 1016-bit RSA key
with SHA-512, which still has too large of a hash because we will not
reduce the salt size further than 2 bytes shorter than the hash size.
The RSA private key used for the test was generated using "openssl
genrsa 1016" using OpenSSL 1.1.1-pre8.
$ openssl genrsa 1016
Generating RSA private key, 1016 bit long modulus (2 primes)
..............++++++
....++++++
e is 65537 (0x010001)
-----BEGIN RSA PRIVATE KEY-----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-----END RSA PRIVATE KEY-----
Setting the dh_flag to 1 used to indicate that the caller requests safe
primes from mbedtls_mpi_gen_prime. We generalize the functionality to
make room for more flags in that parameter.
* development-restricted: (578 commits)
Update library version number to 2.13.1
Don't define _POSIX_C_SOURCE in header file
Don't declare and define gmtime()-mutex on Windows platforms
Correct preprocessor guards determining use of gmtime()
Correct documentation of mbedtls_platform_gmtime_r()
Correct typo in documentation of mbedtls_platform_gmtime_r()
Correct POSIX version check to determine presence of gmtime_r()
Improve documentation of mbedtls_platform_gmtime_r()
platform_utils.{c/h} -> platform_util.{c/h}
Don't include platform_time.h if !MBEDTLS_HAVE_TIME
Improve wording of documentation of MBEDTLS_PLATFORM_GMTIME_R_ALT
Fix typo in documentation of MBEDTLS_PLATFORM_GMTIME_R_ALT
Replace 'thread safe' by 'thread-safe' in the documentation
Improve documentation of MBEDTLS_HAVE_TIME_DATE
ChangeLog: Add missing renamings gmtime -> gmtime_r
Improve documentation of MBEDTLS_HAVE_TIME_DATE
Minor documentation improvements
Style: Add missing period in documentation in threading.h
Rename mbedtls_platform_gmtime() to mbedtls_platform_gmtime_r()
Guard decl and use of gmtime mutex by HAVE_TIME_DATE and !GMTIME_ALT
...
previously a single function was used for most test cases (ctr_drbg_validate) making it harder to understand what the exact scenario is as a result it was split into easier to understand functions.
the testing functions were re-factored so that the common code was extracted to a single static function (removing the need for unclear goto statements).
As part of the re-factor the test functions now use data_t for parameters (support for this was introduced in previous rebase),
the change is designed to make configuring 128bit keys for ctr_drbg more similar to other configuration options. Tests have been updated accordingly.
also clarified test naming.
Unify the three existing validation functions (with prediction
resistance, with manual reseeding between generations, and with no
reseeding) into a single function that supports these three scenarios
plus a fourth one (reseed before the first generation).
The four supported scenarios cover the three scenarios from the
current CAVP test vectors (no reseed, reseed before generating,
prediction resistance) plus a fourth scenario used by the existing
test vectors (reseed after generating).
(cherry picked from commit cee9bedee6bc1a8e2b22fa8a31647b62ebb8a0a4)
The ctr_drbg_validate_xxx test functions had hard-coded sizes for the
entropy and the output size. Generalize the sizes.
Keep track of the current entropy size.
Unhexify the expected output and compare with the actual output,
rather than hexifying the actual output and comparing the hex.
Function test_snprintf() is called by run_test_snprintf() with constant test
data. It gets inlined and is subjected to snprintf format truncation checks
introduced by -Wformat-truncation in gcc-7. -Wformat-truncation is turned
On by -Wall and other similar options. It results in error with -Werror.
-Wformat-truncation makes tests performed by run_test_snprintf() redundant
on gcc. But they are still relevant for other compilers. This commit prevents
inlining of test_snprintf() to avoid gcc compile time checks.
Test suite header code was not gaurded with test suite dependency.
But some test suites have additional code in the headers section.
Variables in that section become unused if suite functions are
gaurded. Hence gaurded the headers section.
But this changed cuased missing types in get_expression() function
that was originally accessing types defined through suite headers.
Hence had to gaurd expressions code as well.
Gaurding expressions does not allow parsing the parameters when
some types or hash defs are gaurded. Hence added function
check_test() to check if test is allowed or not before parsing the
parameters.
- Separate string and hex parameter as unhexify is moved out of the function. It's input should only be hex.
- Fix test mbedtls_ccm_encrypt_and_tag that grows input message buffer with tag
- Add missing expected length parameter in ECP TLS tests
- Add deleted TEST_ASSERT and mbedtls calls that got removed in script based code generation
Address review comments:
1. add `mbedtls_cipher_init()` after freeing context, in test code
2. style comments
3. set `ctx->iv_size = 0` in case `IV == NULL && iv_len == 0`
* development: (180 commits)
Change the library version to 2.11.0
Fix version in ChangeLog for fix for #552
Add ChangeLog entry for clang version fix. Issue #1072
Compilation warning fixes on 32b platfrom with IAR
Revert "Turn on MBEDTLS_SSL_ASYNC_PRIVATE by default"
Fix for missing len var when XTS config'd and CTR not
ssl_server2: handle mbedtls_x509_dn_gets failure
Fix harmless use of uninitialized memory in ssl_parse_encrypted_pms
SSL async tests: add a few test cases for error in decrypt
Fix memory leak in ssl_server2 with SNI + async callback
SNI + SSL async callback: make all keys async
ssl_async_resume: free the operation context on error
ssl_server2: get op_name from context in ssl_async_resume as well
Clarify "as directed here" in SSL async callback documentation
SSL async callbacks documentation: clarify resource cleanup
Async callback: use mbedtls_pk_check_pair to compare keys
Rename mbedtls_ssl_async_{get,set}_data for clarity
Fix copypasta in the async callback documentation
SSL async callback: cert is not always from mbedtls_ssl_conf_own_cert
ssl_async_set_key: detect if ctx->slots overflows
...
* development: (182 commits)
Change the library version to 2.11.0
Fix version in ChangeLog for fix for #552
Add ChangeLog entry for clang version fix. Issue #1072
Compilation warning fixes on 32b platfrom with IAR
Revert "Turn on MBEDTLS_SSL_ASYNC_PRIVATE by default"
Fix for missing len var when XTS config'd and CTR not
ssl_server2: handle mbedtls_x509_dn_gets failure
Fix harmless use of uninitialized memory in ssl_parse_encrypted_pms
SSL async tests: add a few test cases for error in decrypt
Fix memory leak in ssl_server2 with SNI + async callback
SNI + SSL async callback: make all keys async
ssl_async_resume: free the operation context on error
ssl_server2: get op_name from context in ssl_async_resume as well
Clarify "as directed here" in SSL async callback documentation
SSL async callbacks documentation: clarify resource cleanup
Async callback: use mbedtls_pk_check_pair to compare keys
Rename mbedtls_ssl_async_{get,set}_data for clarity
Fix copypasta in the async callback documentation
SSL async callback: cert is not always from mbedtls_ssl_conf_own_cert
ssl_async_set_key: detect if ctx->slots overflows
...
mbedtls_aes_crypt_xts() currently takes a `bits_length` parameter, unlike
the other block modes. Change the parameter to accept a bytes length
instead, as the `bits_length` parameter is not actually ever used in the
current implementation.
Add a new context structure for XTS. Adjust the API for XTS to use the new
context structure, including tests suites and the benchmark program. Update
Doxgen documentation accordingly.
AES-XEX is a building block for other cryptographic standards and not yet a
standard in and of itself. We'll just provide the standardized AES-XTS
algorithm, and not AES-XEX. The AES-XTS algorithm and interface provided
can be used to perform the AES-XEX algorithm when the length of the input
is a multiple of the AES block size.
XTS mode is fully known as "xor-encrypt-xor with ciphertext-stealing".
This is the generalization of the XEX mode.
This implementation is limited to an 8-bits (1 byte) boundary, which
doesn't seem to be what was thought considering some test vectors [1].
This commit comes with tests, extracted from [1], and benchmarks.
Although, benchmarks aren't really nice here, as they work with a buffer
of a multiple of 16 bytes, which isn't a challenge for XTS compared to
XEX.
[1] http://csrc.nist.gov/groups/STM/cavp/documents/aes/XTSTestVectors.zip
The test cases come from the XTS test vectors given by the CAVP initiative
from NIST (see [1]).
As mentioned in a previous commit, XEX is a simpler case of XTS.
Therefore, to construct the test_suite_aes.xex.data file, extraction of
the XEX-possible cases has been done on the given test vectors.
All of the extracted test vectors pass the tests on a Linux x86_64 machine.
[1] http://csrc.nist.gov/groups/STM/cavp/documents/aes/XTSTestVectors.zip
The way we do negative tests only works if the initial test was positive.
This was not immediately apparent with the set of test data at the time the
code for negative testing was introduced, but it became apparent with the
addition of the "0 private value" / "overlong private value" tests that
happened in development while this branch was developed.
Summary of merge conflicts:
include/mbedtls/ecdh.h -> documentation style
include/mbedtls/ecdsa.h -> documentation style
include/mbedtls/ecp.h -> alt style, new error codes, documentation style
include/mbedtls/error.h -> new error codes
library/error.c -> new error codes (generated anyway)
library/ecp.c:
- code of an extracted function was changed
library/ssl_cli.c:
- code addition on one side near code change on the other side
(ciphersuite validation)
library/x509_crt.c -> various things
- top fo file: helper structure added near old zeroize removed
- documentation of find_parent_in()'s signature: improved on one side,
added arguments on the other side
- documentation of find_parent()'s signature: same as above
- verify_chain(): variables initialised later to give compiler an
opportunity to warn us if not initialised on a code path
- find_parent(): funcion structure completely changed, for some reason git
tried to insert a paragraph of the old structure...
- merge_flags_with_cb(): data structure changed, one line was fixed with a
cast to keep MSVC happy, this cast is already in the new version
- in verify_restratable(): adjacent independent changes (function
signature on one line, variable type on the next)
programs/ssl/ssl_client2.c:
- testing for IN_PROGRESS return code near idle() (event-driven):
don't wait for data in the the socket if ECP_IN_PROGRESS
tests/data_files/Makefile: adjacent independent additions
tests/suites/test_suite_ecdsa.data: adjacent independent additions
tests/suites/test_suite_x509parse.data: adjacent independent additions
* development: (1059 commits)
Change symlink to hardlink to avoid permission issues
Fix out-of-tree testing symlinks on Windows
Updated version number to 2.10.0 for release
Add a disabled CMAC define in the no-entropy configuration
Adapt the ARIA test cases for new ECB function
Fix file permissions for ssl.h
Add ChangeLog entry for PR#1651
Fix MicroBlaze register typo.
Fix typo in doc and copy missing warning
Fix edit mistake in cipher_wrap.c
Update CTR doc for the 64-bit block cipher
Update CTR doc for other 128-bit block ciphers
Slightly tune ARIA CTR documentation
Remove double declaration of mbedtls_ssl_list_ciphersuites
Update CTR documentation
Use zeroize function from new platform_util
Move to new header style for ALT implementations
Add ifdef for selftest in header file
Fix typo in comments
Use more appropriate type for local variable
...
Adds error handling into mbedtls_aes_crypt_ofb for AES errors, a self-test
for the OFB mode using NIST SP 800-38A test vectors and adds a check to
potential return errors in setting the AES encryption key in the OFB test
suite.
* development: (97 commits)
Updated version number to 2.10.0 for release
Add a disabled CMAC define in the no-entropy configuration
Adapt the ARIA test cases for new ECB function
Fix file permissions for ssl.h
Add ChangeLog entry for PR#1651
Fix MicroBlaze register typo.
Fix typo in doc and copy missing warning
Fix edit mistake in cipher_wrap.c
Update CTR doc for the 64-bit block cipher
Update CTR doc for other 128-bit block ciphers
Slightly tune ARIA CTR documentation
Remove double declaration of mbedtls_ssl_list_ciphersuites
Update CTR documentation
Use zeroize function from new platform_util
Move to new header style for ALT implementations
Add ifdef for selftest in header file
Fix typo in comments
Use more appropriate type for local variable
Remove useless parameter from function
Wipe sensitive info from the stack
...
Commit 08c337d058 "Remove useless parameter from function" removed the
parameter mode from the functions mbedtls_aria_crypt_ecb() which broke their
respective test suite.
This commit fixes those test cases.
Allowing DECRYPT with crypt_and_tag is a risk as people might fail to check
the tag correctly (or at all). So force them to use auth_decrypt() instead.
See also https://github.com/ARMmbed/mbedtls/pull/1668
- need HW failure codes too
- re-use relevant poly codes for chachapoly to save on limited space
Values were chosen to leave 3 free slots at the end of the NET odd range.
This module used (len, pointer) while (pointer, len) is more common in the
rest of the library, in particular it's what's used in the CMAC API that is
very comparable to Poly1305, so switch to (pointer, len) for consistency.
In addition to making the APIs of the various AEAD modules more consistent
with each other, it's useful to have an auth_decrypt() function so that we can
safely check the tag ourselves, as the user might otherwise do it in an
insecure way (or even forget to do it altogether).
While the old name is explicit and aligned with the RFC, it's also very long,
so with the mbedtls_ prefix prepended we get a 31-char prefix to each
identifier, which quickly conflicts with our 80-column policy.
The new name is shorter, it's what a lot of people use when speaking about
that construction anyway, and hopefully should not introduce confusion at
it seems unlikely that variants other than 20/1305 be standardised in the
foreseeable future.
This implementation is based off the description in RFC 7539.
The ChaCha20 code is also updated to provide a means of generating
keystream blocks with arbitrary counter values. This is used to
generated the one-time Poly1305 key in the AEAD construction.
* development: (504 commits)
Fix minor code style issues
Add the uodate to the soversion to the ChangeLog
Fix the ChangeLog for clarity, english and credit
Update version to 2.9.0
ecp: Fix binary compatibility with group ID
Changelog entry
Change accepted ciphersuite versions when parsing server hello
Remove preprocessor directives around platform_util.h include
Fix style for mbedtls_mpi_zeroize()
Improve mbedtls_platform_zeroize() docs
mbedtls_zeroize -> mbedtls_platform_zeroize in docs
Reword config.h docs for MBEDTLS_PLATFORM_ZEROIZE_ALT
Organize CMakeLists targets in alphabetical order
Organize output objs in alfabetical order in Makefile
Regenerate errors after ecp.h updates
Update ecp.h
Change variable bytes_written to header_bytes in record decompression
Update ecp.h
Update ecp.h
Update ecp.h
...
The specification requires that numbers are the raw entropy (except for odd/
even) and at least 2^(nbits-0.5). If not, new random bits need to be used for
the next number. Similarly, if the number is not prime new random bits need to
be used.
Conflict resolution:
* ChangeLog
* tests/data_files/Makefile: concurrent additions, order irrelevant
* tests/data_files/test-ca.opensslconf: concurrent additions, order irrelevant
* tests/scripts/all.sh: one comment change conflicted with a code
addition. In addition some of the additions in the
iotssl-1381-x509-verify-refactor-restricted branch need support for
keep-going mode, this will be added in a subsequent commit.
The relevant ASN.1 definitions for a PKCS#8 encoded Elliptic Curve key are:
PrivateKeyInfo ::= SEQUENCE {
version Version,
privateKeyAlgorithm PrivateKeyAlgorithmIdentifier,
privateKey PrivateKey,
attributes [0] IMPLICIT Attributes OPTIONAL
}
AlgorithmIdentifier ::= SEQUENCE {
algorithm OBJECT IDENTIFIER,
parameters ANY DEFINED BY algorithm OPTIONAL
}
ECParameters ::= CHOICE {
namedCurve OBJECT IDENTIFIER
-- implicitCurve NULL
-- specifiedCurve SpecifiedECDomain
}
ECPrivateKey ::= SEQUENCE {
version INTEGER { ecPrivkeyVer1(1) } (ecPrivkeyVer1),
privateKey OCTET STRING,
parameters [0] ECParameters {{ NamedCurve }} OPTIONAL,
publicKey [1] BIT STRING OPTIONAL
}
Because of the two optional fields, there are 4 possible variants that need to
be parsed: no optional fields, only parameters, only public key, and both
optional fields. Previously mbedTLS was unable to parse keys with "only
parameters". Also, only "only public key" was tested. There was a test for "no
optional fields", but it was labelled incorrectly as SEC.1 and not run because
of a great renaming mixup.
The 'critical' boolean can be set to false in two ways:
- by leaving it implicit (test data generated by openssl)
- by explicitly setting it to false (generated by hand)
This covers all lines added in the previous commit. Coverage was tested using:
make CFLAGS='--coverage -g3 -O0'
(cd tests && ./test_suite_x509parse)
make lcov
firefox Coverage/index.html # then visual check
Test data was generated by taking a copy of tests/data_files/crl-idp.pem,
encoding it as hex, and then manually changing the values of some bytes to
achieve the desired errors, using https://lapo.it/asn1js/ for help in locating
the desired bytes.
Found by running:
CC=clang cmake -D CMAKE_BUILD_TYPE="Check"
tests/scripts/depend-pkalgs.pl
(Also tested with same command but CC=gcc)
Another PR will address improving all.sh and/or the depend-xxx.pl scripts
themselves to catch this kind of thing.
* development: (557 commits)
Add attribution for #1351 report
Adapt version_features.c
Note incompatibility of truncated HMAC extension in ChangeLog
Add LinkLibraryDependencies to VS2010 app template
Add ChangeLog entry for PR #1382
MD: Make deprecated functions not inline
Add ChangeLog entry for PR #1384
Have Visual Studio handle linking to mbedTLS.lib internally
Mention in ChangeLog that this fixes#1351
Add issue number to ChangeLog
Note in the changelog that this fixes an interoperability issue.
Style fix in ChangeLog
Add ChangeLog entries for PR #1168 and #1362
Add ChangeLog entry for PR #1165
ctr_drbg: Typo fix in the file description comment.
dhm: Fix typo in RFC 5114 constants
tests_suite_pkparse: new PKCS8-v2 keys with PRF != SHA1
data_files/pkcs8-v2: add keys generated with PRF != SHA1
tests/pkcs5/pbkdf2_hmac: extend array to accommodate longer results
tests/pkcs5/pbkdf2_hmac: add unit tests for additional SHA algorithms
...
Extend the pkparse test suite with the newly created keys
encrypted using PKCS#8 with PKCS#5 v2.0 with PRF being
SHA224, 256, 384 and 512.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Some unit tests for pbkdf2_hmac() have results longer than
99bytes when represented in hexadecimal form.
For this reason extend the result array to accommodate
longer strings.
At the same time make memset() parametric to avoid
bugs in the future.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Test vectors for SHA224,256,384 and 512 have been
generated using Python's hashlib module by the
following oneliner:
import binascii, hashlib
binascii.hexlify(hashlib.pbkdf2_hmac(ALGO, binascii.unhexlify('PASSWORD'), binascii.unhexlify('SALT'), ITER, KEYLEN)))
where ALGO was 'sha224', 'sha256', 'sha384' and 'sha512'
respectively.
Values for PASSWORD, SALT, ITER and KEYLEN were copied from the
existent test vectors for SHA1.
For SHA256 we also have two test vectors coming from RFC7914 Sec 11.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Currently only SHA1 is supported as PRF algorithm for PBKDF2
(PKCS#5 v2.0).
This means that keys encrypted and authenticated using
another algorithm of the SHA family cannot be decrypted.
This deficiency has become particularly incumbent now that
PKIs created with OpenSSL1.1 are encrypting keys using
hmacSHA256 by default (OpenSSL1.0 used PKCS#5 v1.0 by default
and even if v2 was forced, it would still use hmacSHA1).
Enable support for all the digest algorithms of the SHA
family for PKCS#5 v2.0.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
1. Style issues fixes - remove redundant spacing.
2. Remove depency of `MBEDTLS_RSA_C` in `pk_parse_public_keyfile_rsa()`
tests, as the function itself is dependent on it.
This change fixes a problem in the tests pk_rsa_alt() and
pk_rsa_overflow() from test_suite_pk.function that would cause a
segmentation fault. The problem is that these tests are only designed
to run in computers where the SIZE_MAX > UINT_MAX.
Change function in tests named mbedtls_entropy_func to
mbedtls_test_entropy_func to avoid getting error from the linker when
calling the mbedtls_entropy_func elsewhere.
The _ext suffix suggests "new arguments", but the new functions have
the same arguments. Use _ret instead, to convey that the difference is
that the new functions return a value.
Conflict resolution:
* ChangeLog: put the new entries in their rightful place.
* library/x509write_crt.c: the change in development was whitespace
only, so use the one from the iotssl-1251 feature branch.
1) `mbedtls_rsa_import_raw` used an uninitialized return
value when it was called without any input parameters.
While not sensible, this is allowed and should be a
succeeding no-op.
2) The MPI test for prime generation missed a return value
check for a call to `mbedtls_mpi_shift_r`. This is neither
critical nor new but should be fixed.
3) Both the RSA keygeneration example program and the
RSA test suites contained code initializing an RSA context
after a potentially failing call to CTR DRBG initialization,
leaving the corresponding RSA context free call in the
cleanup section of the respective function orphaned.
While this defect existed before, Coverity picked up on
it again because of newly introduced MPI's that were
also wrongly initialized only after the call to CTR DRBG
init. The commit fixes both the old and the new issue
by moving the initializtion of both the RSA context and
all MPI's prior to the first potentially failing call.
* development:
Timing self test: shorten redundant tests
Timing self test: increased duration
Timing self test: increased tolerance
Timing unit tests: more protection against infinite loops
Unit test for mbedtls_timing_hardclock
New timing unit tests
selftest: allow excluding a subset of the tests
selftest: allow running a subset of the tests
selftest: refactor to separate the list of tests from the logic
Timing self test: print some diagnosis information
mbedtls_timing_get_timer: don't use uninitialized memory
timing interface documentation: minor clarifications
Timing: fix mbedtls_set_alarm(0) on Unix/POSIX
* public/pr/1136:
Timing self test: shorten redundant tests
Timing self test: increased duration
Timing self test: increased tolerance
Timing unit tests: more protection against infinite loops
Unit test for mbedtls_timing_hardclock
New timing unit tests
selftest: allow excluding a subset of the tests
selftest: allow running a subset of the tests
selftest: refactor to separate the list of tests from the logic
Timing self test: print some diagnosis information
mbedtls_timing_get_timer: don't use uninitialized memory
timing interface documentation: minor clarifications
Timing: fix mbedtls_set_alarm(0) on Unix/POSIX
* Correct order of sections in ChangeLog
* Restore unintentionally removed whitespace and
formatting improvements.
* Consistently rename MBEDTLS_ERR_RSA_EXPORT_UNSUPPORTED
to MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION in rsa.h
documentation.
During the work on the RSA change the issue was brought up,
and a fix was provided on development, that some RSA tests
use CTR DRBG and depend on the presence of a strong entropy
source to succeed. The RSA work introduced more tests using
CTR DRBG, and the dependency needs to be added for them, too.
If timing_timer_simple fails because it detects that timers are likely
to never expire (e.g. going backward or not incrementing), skip all
tests that rely on timers.
Do test mbedtls_timing_hardclock. We can't reliably test much about
it, but at least test that it doesn't crash, isn't constant, and
doesn't look completely random.
New set of unit tests for the timing module, instead of just running
the selftest function.
The selftest function sometimes fails on a heavily loaded
machine (such as a typical continuous integration system). Because of
the all-in-one nature of the test and because the exact load pattern
can be hard to reproduce, it is difficult to diagnose failures of CI
runs with selftest. The new tests are more separated and I strove to
point out potential failure modes in comments.
* mbedtls_timing_hardclock: not tested. This function gives so few
guarantees that there isn't much to test, and it is hard to test
reliably because clock cycles don't easily relate to time in any
remotely portable way. This function isn't used in the library
anyway, it's only there for benchmark programs.
* mbedtls_timing_get_timer: tested by setting a timer and verifying
that it reaches its target, and by verifying that a timer started
later than another always has a smaller elapsed time.
* mbedtls_set_alarm: tested by setting an alarm, busy-waiting for it
and measuring the elapsed time with a timer.
* mbedtls_timing_set_delay, mbedtls_timing_get_delay: tested by
setting a delay object and watching it go through its two delay
values, using a timer to check that the delays are passed at the
expected time.
The tests pass under light to moderate load, but some of them can be
defeated with sufficiently heavy load. This is unavoidable since the
test process to be effectively suspended for any length of time,
making us think that a timer has gone on for too long.
* development:
Don't split error code description across multiple lines
Register new error code in error.h
Move deprecation to separate section in ChangeLog
Extend scope of ERR_RSA_UNSUPPORTED_OPERATION error code
Adapt RSA test suite
Adapt ChangeLog
Deprecate usage of RSA primitives with wrong key type
* restricted/pr/397:
Don't split error code description across multiple lines
Register new error code in error.h
Move deprecation to separate section in ChangeLog
Extend scope of ERR_RSA_UNSUPPORTED_OPERATION error code
Adapt RSA test suite
Adapt ChangeLog
Deprecate usage of RSA primitives with wrong key type
For a key of size 8N+1, check that the first byte after applying the
public key operation is 0 (it could have been 1 instead). The code was
incorrectly doing a no-op check instead, which led to invalid
signatures being accepted. Not a security flaw, since you would need the
private key to craft such an invalid signature, but a bug nonetheless.
The check introduced by the previous security fix was off by one. It
fixed the buffer overflow but was not compliant with the definition of
PSS which technically led to accepting some invalid signatures (but
not signatures made without the private key).
Fix buffer overflow in RSA-PSS signature verification when the hash is
too large for the key size. Found by Seth Terashima, Qualcomm.
Added a non-regression test and a positive test with the smallest
permitted key size for a SHA-512 hash.
1) use `pk_get_rsapubkey` instead of reimplementing the parsing
2) rename the key files, according to their type and key size
3) comment in the data_files/Makefile hoe the keys were generated
4) Fix issue of failure parsing pkcs#1 DER format parsing, missed in previous commit
