Add a DTLS small packet test for each of the following combinations:
- DTLS version: 1.0 or 1.2
- Encrypt then MAC extension enabled
- Truncated HMAC extension enabled
Large packets tests for DTLS are currently not possible due to parameter
constraints in ssl_server2.
This commit ensures that there is a small packet test for at least any
combination of
- SSL/TLS version: SSLv3, TLS 1.0, TLS 1.1 or TLS 1.2
- Stream cipher (RC4) or Block cipher (AES)
- Usage of Encrypt then MAC extension [TLS only]
- Usage of truncated HMAC extension [TLS only]
Noticed that the test cases in ssl-opt.sh exercising the truncated HMAC
extension do not depend on MBEDTLS_SSL_TRUNCATED_HMAC being enabled in
config.h. This commit fixes this.
Previously, MAC validation for an incoming record proceeded as follows:
1) Make a copy of the MAC contained in the record;
2) Compute the expected MAC in place, overwriting the presented one;
3) Compare both.
This resulted in a record buffer overflow if truncated MAC was used, as in this
case the record buffer only reserved 10 bytes for the MAC, but the MAC
computation routine in 2) always wrote a full digest.
For specially crafted records, this could be used to perform a controlled write of
up to 6 bytes past the boundary of the heap buffer holding the record, thereby
corrupting the heap structures and potentially leading to a crash or remote code
execution.
This commit fixes this by making the following change:
1) Compute the expected MAC in a temporary buffer that has the size of the
underlying message digest.
2) Compare to this to the MAC contained in the record, potentially
restricting to the first 10 bytes if truncated HMAC is used.
A similar fix is applied to the encryption routine `ssl_encrypt_buf`.
For a key of size 8N+1, check that the first byte after applying the
public key operation is 0 (it could have been 1 instead). The code was
incorrectly doing a no-op check instead, which led to invalid
signatures being accepted. Not a security flaw, since you would need the
private key to craft such an invalid signature, but a bug nonetheless.
The check introduced by the previous security fix was off by one. It
fixed the buffer overflow but was not compliant with the definition of
PSS which technically led to accepting some invalid signatures (but
not signatures made without the private key).
Fix buffer overflow in RSA-PSS signature verification when the hash is
too large for the key size. Found by Seth Terashima, Qualcomm.
Added a non-regression test and a positive test with the smallest
permitted key size for a SHA-512 hash.
1) use `pk_get_rsapubkey` instead of reimplementing the parsing
2) rename the key files, according to their type and key size
3) comment in the data_files/Makefile hoe the keys were generated
4) Fix issue of failure parsing pkcs#1 DER format parsing, missed in previous commit
This commit adds regression tests for the bug when we didn't parse the
Signature Algorithm extension when renegotiating. (By nature, this bug
affected only the server)
The tests check for the fallback hash (SHA1) in the server log to detect
that the Signature Algorithm extension hasn't been parsed at least in
one of the handshakes.
A more direct way of testing is not possible with the current test
framework, since the Signature Algorithm extension is parsed in the
first handshake and any corresponding debug message is present in the
logs.
The test case parses an RSA private key with N=P=Q=D=E=1 and expects a failure from the PK layer. With the weakened
semantics of `mbedtls_rsa_complete`, the latter won't throw an error on that key in case if MBEDTLS_RSA_NO_CRT is
set. This commit modifies the test case to use N=2 which is rejected by `mbedtls_rsa_complete` regardless of whether
MBEDTLS_RSA_NO_CRT is set or not.
The number of loop iterations per candidate in `mbedtls_deduce_primes` was off
by one. This commit corrects this and removes a toy non-example from the RSA
test suite, as it seems difficult to have the function fail on small values of N
even if D,E are corrupted.
This commit adds regression tests for the bug when we didn't parse the
Signature Algorithm extension when renegotiating. (By nature, this bug
affected only the server)
The tests check for the fallback hash (SHA1) in the server log to detect
that the Signature Algorithm extension hasn't been parsed at least in
one of the handshakes.
A more direct way of testing is not possible with the current test
framework, since the Signature Algorithm extension is parsed in the
first handshake and any corresponding debug message is present in the
logs.
This commit splits off the RSA helper functions into separate headers and
compilation units to have a clearer separation of the public RSA interface,
intended to be used by end-users, and the helper functions which are publicly
provided only for the benefit of designers of alternative RSA implementations.
The tests now accept two result parameters, one for the expected result of the
completion call, and one for the expected result of the subsequent sanity
check.
DTLS records from previous epochs were incorrectly checked against the
current epoch transform's minimal content length, leading to the
rejection of entire datagrams. This commit fixed that and adapts two
test cases accordingly.
Internal reference: IOTSSL-1417
It seems that tests from ssl-opt.sh are sometimes failing because
the server is killed before its output has been finalized. This commit
adds a small delay in ssl-opt.sh before killing the server to prevent
that.
ssl-opt.sh checks whether the client, server and proxy commands are
names of executable files, forbidding the use of default arguments by
by e.g. setting P_SRV="ssl_server2 debug_level=3". This commit relaxes
this check, only considering the part of the command string prior to
the first whitespace.
The change modifies the template code in tests/suites/helpers.function
and tests/suites/main.function so that error messages are printed to
stdout instead of being discarded. This makes errors visible regardless
of the --verbose flag being passed or not to the test suite programs.
The change modifies the template code in tests/suites/helpers.function
and tests/suites/main.function so that error messages are printed to
stdout instead of being discarded. This makes errors visible regardless
of the --verbose flag being passed or not to the test suite programs.
Add a test to ssl-opt.sh that parses the client and server debug
output and then checks that the Unix timestamp in the ServerHello
message is within acceptable bounds.
Extend the run_test function in ssl-opt.sh so that it accepts the -f
and -F options. These parameters take an argument which is the name of
a shell function that will be called by run_test and will be given the
client input and output debug log. The idea is that these functions are
defined by each test and they can be used to do some custom check
beyon those allowed by the pattern matching capabilities of the
run_test function.
Add a test case calling ssl_set_hostname twice to test_suite_ssl.
When run in CMake build mode ASan, this catches the current leak,
but will hopefully be fine with the new version.
Add a test to ssl-opt.sh that parses the client and server debug
output and then checks that the Unix timestamp in the ServerHello
message is within acceptable bounds.
Extend the run_test function in ssl-opt.sh so that it accepts the -f
and -F options. These parameters take an argument which is the name of
a shell function that will be called by run_test and will be given the
client input and output debug log. The idea is that these functions are
defined by each test and they can be used to do some custom check
beyon those allowed by the pattern matching capabilities of the
run_test function.
As the new PKCS v1.5 verification function opaquely compares an expected encoding to the given one, it cannot
distinguish multiple reasons of failure anymore and instead always returns MBEDTLS_ERR_RSA_VERIFY_FAILED. This
necessitates some modifications to the expected return values of some tests verifying signatures with bad padding.
This commit adds some tests to the RSA test suite verifying that RSA PKCS-v15 signatures with non-reduced length
encodings are refuted. Details are provided via comments in the test suite data file.
Add a test case calling ssl_set_hostname twice to test_suite_ssl.
When run in CMake build mode ASan, this catches the current leak,
but will hopefully be fine with the new version.
This commit adds a flag to the RSA import/export tests indicating whether it is
expected that a full RSA keypair can be set up from the provided parameters.
Further, the tests of `mbedtls_rsa_import` and `mbedtls_rsa_import_raw` are
expanded to perform key checks and an example encryption-decryption.
Some tests in ssl-opt.sh require MBEDTLS_SSL_MAX_CONTENT_LEN to be set to its
default value of 16384 to succeed. While ideally such a dependency should not
exist, as a short-term remedy this commit adds a small check that will at least
lead to graceful exit if that assumption is violated.
A bug in the dhm_check_range() function makes it pass even when the
parameters are not in the range. This commit adds tests for signalling
this problem as well as a couple of other negative tests.
This commit adds four tests to ssl-opt.sh testing the library's behavior when
`mbedtls_ssl_write` is called with messages beyond 16384 bytes. The combinations
tested are TLS vs. DTLS and MBEDTLS_SSL_MAX_FRAGMENT_LENGTH enabled vs. disabled.
This commit adds a build with default config except
MBEDTLS_SSL_MAX_FRAGMENT_LENGTH to all.sh, as well as a run of the MFL-related
tests in ssl-opt.sh.
This commit renames the test-only flag MBEDTLS_ENTROPY_HAVE_STRONG to ENTROPY_HAVE_STRONG to make it more transparent
that it's an internal flag, and also to content the testscript tests/scripts/check-names.pl which previously complained
about the macro occurring in a comment in `entropy.c` without being defined in a library file.
Previously, 2048-bit and 4096-bit RSA key files had their bitsize indicated in their filename, while the original
1024-bit keys hadn't. This commit unifies the naming scheme by always indicating the bitsize in the filename.
For uniformity, this commit adds tests for DER encoded, SHA1-2DES and SHA1-RC4-128-encrypted RSA keys; for SHA1-3DES encrypted keys, these were already present.
This commit adds the commands used to generate the various RSA keys to tests/Makefile so that they can be easily
regenerated or modified, e.g. if larger key sizes or other encryption algorithms need to be tested in the future.
* mbedtls-2.6: (27 commits)
Update version number to 2.6.0
Fix language in Changelog for clarity
Improve documentation of PKCS1 decryption functions
Fix style and missing item in ChangeLog
Add credit to Changelog to fix for #666
Fix naked call to time() with platform call
Fix ChangeLog for duplication after merge
Rename time and index parameter to avoid name conflict.
Correct comment
Adapt ChangeLog
Reliably zeroize sensitive data in AES sample application
Reliably zeroize sensitive data in Crypt-and-Hash sample application
Fix potential integer overflow parsing DER CRT
Fix potential integer overflow parsing DER CRL
Move the git scripts to correct path
Update after @sbutcher-arm comments
Fix slash direction for linux path
Add note for the git_hoos README file
Pre push hook script
Check return code of mbedtls_mpi_fill_random
...
This commit adds test for the new library function mbedtls_rsa_check_params for
checking a set of RSA core parameters. There are some toy example tests with
small numbers that can be verified by hand, as well as tests with real world
numbers. Complete, partial and corrupted data are tested, as well the check for
primality exactly if a PRNG is provided.
This commit adds tests for the new library function mbedtls_rsa_export_raw.
Each test case performs the following steps:
- Parse and convert a set of hex-string decoded core RSA parameters into big
endian byte arrays.
- Use these to initialize an RSA context
- Export core RSA parameters as byte arrays again afterwards
- Compare byte strings.
Each test split is performed twice, once with successive and once with
simultaneous exporting.
This commit adds tests for the new library function mbedtls_rsa_export. Each
test case performs the following steps:
- Parse and convert a set of hex-string decoded core RSA parameters into MPI's.
- Use these to initialize an RSA context
- Export core RSA parameters as MPI's again afterwards
- Compare initial MPI's to exported ones.
In the private key case, all core parameters are exported and sanity-checked,
regardless of whether they were also used during setup.
Each test split is performed twice, once with successive and once with
simultaneous exporting.
This commit adds numerous tests for the new library functions mbedtls_rsa_import
and mbedtls_rsa_import_raw in conjunction with mbedtls_rsa_complete for
importing and completing core sets of core RSA parameters (N,P,Q,D,E) into an
RSA context, with the importing accepting either MPI's or raw big endian
buffers.
Each test is determined by the following parameters:
1) Set of parameters provided
We're testing full sets (N,P,Q,D,E), partial sets (N,-,-,D,E) and (N,P,Q,-,E)
that are sufficient to generate missing parameters, and the partial and
insufficient set (N, -, Q, -, E).
2) Simultaenous or successive importing
The functions rsa_import and rsa_import_raw accept importing parameters at
once or one after another. We test both.
3) Sanity of parameters
This commit adds test for the new library function mbedtls_rsa_deduce_moduli for
deducing the prime factors (P,Q) of an RSA modulus N from knowledge of a
pair (D,E) of public and private exponent:
- Two toy examples that can be checked by hand, one fine and with bad parameters.
- Two real world examples, one fine and one with bad parameters.
This commit adds tests for the new library function mbedtls_rsa_deduce_private
for deducing the private RSA exponent D from the public exponent E and the
factorization (P,Q) of the RSA modulus:
- Two toy examples with small numbers that can be checked by hand, one
working fine and another failing due to bad parameters.
- Two real world examples, one fine and one with bad parameters.
Our current behaviour is a bit inconsistent here:
- when the bad signature is made by a trusted CA, we stop here and don't
include the trusted CA in the chain (don't call vrfy on it)
- otherwise, we just add NOT_TRUSTED to the flags but keep building the chain
and call vrfy on the upper certs
This ensures that the callback can actually clear that flag, and that it is
seen by the callback at the right level. This flag is not set at the same
place than others, and this difference will get bigger in the upcoming
refactor, so let's ensure we don't break anything here.
When a trusted CA is rolling its root keys, it could happen that for some
users the list of trusted roots contains two versions of the same CA with the
same name but different keys. Currently this is supported but wasn't tested.
Note: the intermediate file test-ca-alt.csr is commited on purpose, as not
commiting intermediate files causes make to regenerate files that we don't
want it to touch.
As we accept EE certs that are explicitly trusted (in the list of trusted
roots) and usually look for parent by subject, and in the future we might want
to avoid checking the self-signature on trusted certs, there could a risk that we
incorrectly accept a cert that looks like a trusted root except it doesn't
have the same key. This test ensures this will never happen.
The tests cover chains of length 0, 1 and 2, with one error, located at any of
the available levels in the chain. This exercises all three call sites of
f_vrfy (two in verify_top, one in verify_child). Chains of greater length
would not cover any new code path or behaviour that I can see.
So far there was no test ensuring that the flags passed to the vrfy callback
are correct (ie the flags for the current certificate, not including those of
the parent).
Actual tests case making use of that test function will be added in the next
commit.
With cmake, CFLAGS has to be set when invoking cmake, not make (which totally
ignores the value of CFLAGS when it runs and only keeps the one from cmake).
Also, in that case the flags were either redundant (-Werror etc) or wrong
(-std=c99 -pedantic) as some parts of the library will not build with
-pedantic (see the other -pedantic tests, which are correct, for what needs to
be disabled).
This is step 1 of a plan to get rid once and for all of missing depends_on in
the X509 test suite (step 2 will be RSA/ECDSA, and step 0 was curves.pl).
We have code to skip them but didn't have explicit tests ensuring they are
(the corresponding branch was never taken).
While at it, remove extra copy of the chain in server10*.crt, which was
duplicated for no reason.
This shows inconsistencies in how flags are handled when callback fails:
- sometimes the flags set by the callback are transmitted, sometimes not
- when the cert if not trusted, sometimes BADCERT_NOT_TRUSTED is set,
sometimes not
This adds coverage for 9 lines and 9 branches. Now all lines related to
callback failure are covered.
Now all checks related to profile are covered in:
- verify_with_profile()
- verify_child()
- verify_top()
(that's 10 lines that were previously not covered)
Leaving aside profile enforcement in CRLs for now, as the focus is on
preparing to refactor cert verification.
Previously flags was left to whatever value it had before. It's cleaner to
make sure it has a definite value, and all bits set looks like the safest way
for when it went very wrong.
The tests only work for a specific number for MBEDTLS_X509_MAX_INTERMEDIATE_CA
so the check has been changed to confirm the default value, and to show an error
otherwise.
The tests only work for a specific number for MBEDTLS_X509_MAX_INTERMEDIATE_CA
so the check has been changed to confirm the default value, and to show an error
otherwise.
The test for MBEDTLS_NO_UDBL_DIVISION wasn't preserving it's own config.h
for the next test.
Also added comments to ARM Compiler 6 tests to better explain them.
The X509 test suite assumes that MBEDTLS_X509_MAX_INTERMEDIATE_CA is below the
hardcoded threshold 20 used in the long certificate chain generating script
tests/data_files/dir-max/long.sh. This commit adds a compile-time check for
that.
Some tests in ssl-opt.sh assumes the value 8 for the maximal number
MBEDTLS_X509_MAX_INTERMEDIATE_CA of intermediate CA's. This commit adds a check
before conducting the respective tests.
The RSA key generation test needs strong entropy to succeed. This commit captures the presence of a strong entropy
source in a preprocessor flag and only runs the key generation test if that flag is set.
The test for MBEDTLS_NO_UDBL_DIVISION wasn't preserving it's own config.h
for the next test.
Also added comments to ARM Compiler 6 tests to better explain them.
The entropy test suite uses a negative dependency "depends_on:!CONFIG_FLAG" for one of its tests. This kind of
dependency (running a test only if some configuration flag is not defined) is currently not supported and instead
results in the respective test case being dropped.
This commit adds support for negative dependencies in test cases.
The function `mbedtls_rsa_gen_key` from `test_suite_rsa.function` initialized a stack allocated RSA context only after
seeding the CTR DRBG. If the latter operation failed, the cleanup code tried to free the uninitialized RSA context,
potentially resulting in a segmentation fault. Fixes one aspect of #1023.
If we didn't walk the whole chain, then there may be any kind of errors in the
part of the chain we didn't check, so setting all flags looks like the safe
thing to do.
Inspired by test code provided by Nicholas Wilson in PR #351.
The test will fail if someone sets MAX_INTERMEDIATE_CA to a value larger than
18 (default is 8), which is hopefully unlikely and can easily be fixed by
running long.sh again with a larger value if it ever happens.
Current behaviour is suboptimal as flags are not set, but currently the goal
is only to document/test existing behaviour.
generate add ctest test-suites, with the --verbose argument to be given
to the test suites.
The verbose output will be shown **only** if ctest is run with `-v` parameter
The verbose argument is to the test-suites, only when run through `ctest`
This commit adds four tests to tests/ssl-opt.sh:
(1) & (2): Check behaviour of optional/required verification when the
trusted CA chain is empty.
(3) & (4): Check behaviour of optional/required verification when the
client receives a server certificate with an unsupported curve.
* gilles/IOTSSL-1330/development:
Changelog entry for the bug fixes
SSLv3: when refusing renegotiation, stop processing
Ignore failures when sending fatal alerts
Cleaned up double variable declaration
Code portability fix
Added changelog entry
Send TLS alerts in many more cases
Skip all non-executables in run-test-suites.pl
SSL tests: server requires auth, client has no certificate
Balanced braces across preprocessor conditionals
Support setting the ports on the command line
By default, keep allowing SHA-1 in key exchange signatures. Disabling
it causes compatibility issues, especially with clients that use
TLS1.2 but don't send the signature_algorithms extension.
SHA-1 is forbidden in certificates by default, since it's vulnerable
to offline collision-based attacks.
There is now one test case to validate that SHA-1 is rejected in
certificates by default, and one test case to validate that SHA-1 is
supported if MBEDTLS_TLS_DEFAULT_ALLOW_SHA1 is #defined.
SHA-1 is now disabled by default in the X.509 layer. Explicitly enable
it in our tests for now. Updating all the test data to SHA-256 should
be done over time.
With SHA-1 deprecation, we need a few certificates using algorithms in
the default support list. Most tests still use SHA-1 though.
The generation process for the new certificates is recorded in the makefile.
The ECJPAKE test suite uses a size zero array for the empty password
used in the tests, which is not valid C. This commit fixes this.
This originally showed up as a compilation failure on Visual Studio
2015, documented in IOTSSL-1242, but can also be observed with GCC
when using the -Wpedantic compilation option.
Fixed a bug in ssl_srv.c when parsing TLS_FALLBACK_SCSV in the
ciphersuite list that caused it to miss it sometimes. Reported by Hugo
Leisink as issue #810. Fix initially by @andreasag01; this commit
isolates the bug fix and adds a non-regression test.
Modify tests/scripts/check-doxy-blocks.pl to ensure that:
* It can only be run from the mbed TLS root directory.
* An error code is returned to the environment when a potential error
in the source code is found.
The test case was generated by modifying our signature code so that it
produces a 7-byte long padding (which also means garbage at the end, so it is
essential in to check that the error that is detected first is indeed the
padding rather than the final length check).
The modular inversion function hangs when provided with the modulus 1. This commit refuses this modulus with a BAD_INPUT error code. It also adds a test for this case.
The TLS client and server code was usually closing the connection in
case of a fatal error without sending an alert. This commit adds
alerts in many cases.
Added one test case to detect that we send the alert, where a server
complains that the client's certificate is from an unknown CA (case
tracked internally as IOTSSL-1330).
Added command line arguments --port and --proxy-port to choose the
ports explicitly instead of deriving them from the PID. This
facilitates debugging e.g. with Wireshark.
Fix a buffer overflow when writting a string representation of an MPI
number to a buffer in hexadecimal. The problem occurs because hex
digits are written in pairs and this is not accounted for in the
calculation of the required buffer size when the number of digits is
odd.
The first three test cases from test_suites_pkparse.data failed because
the key file they read requires DES to be read. However, MBEDTLS_DES_C
was missing from the dependency list.
This curve has special arithmetic on 64 bit platforms and an untested
path lead to trying to free a buffer on the stack.
For the sake of completeness, a test case for a point with non-affine
coordinates has been added as well.
Fixes a regression introduced by an earlier commit that modified
x509_crt_verify_top() to ensure that valid certificates that are after past or
future valid in the chain are processed. However the change introduced a change
in behaviour that caused the verification flags MBEDTLS_X509_BADCERT_EXPIRED and
MBEDTLS_BADCERT_FUTURE to always be set whenever there is a failure in the
verification regardless of the cause.
The fix maintains both behaviours:
* Ensure that valid certificates after future and past are verified
* Ensure that the correct verification flags are set.
Modifies the function mbedtls_x509_crl_parse() to ensure that a CRL in PEM
format with trailing characters after the footer does not result in the
execution of an infinite loop.
Fix potential integer overflows in the following functions:
* mbedtls_md2_update() to be bypassed and cause
* mbedtls_cipher_update()
* mbedtls_ctr_drbg_reseed()
This overflows would mainly be exploitable in 32-bit systems and could
cause buffer bound checks to be bypassed.
Add a test to ssl-opt.sh to ensure that in DTLS a 6 byte record counter
is compared in ssl_check_ctr_renegotiate() instead of a 8 byte one as in
the TLS case. Because currently there are no testing facilities to check
that renegotiation routines are triggered after X number of input/output
messages, the test consists on setting a renegotiation period that
cannot be represented in 6 bytes, but whose least-significant byte is 2.
If the library behaves correctly, the renegotiation routines will be
executed after two exchanged.
Fixes strict C99 builds in all.sh with glibc version >2.19 where platform support
wasn't being compiled in automatically.
Also fixes C99 syntax with armclang.
Changes use of mklink in Windows test builds, to create junctions instead of
directory symbolic links. This removes the need for an elevated command prompt
when running cmake to create the Visual Studio project files.
Tighten up the test options in all.sh, test-ref-configs.pl and curves.pl
to ensure the builds are strict for all warnings, warnings are treated
as errors, and that wherever possible builds are strict to the C99
standard. (Note that builds that use the Unix sockets API cannot be).
Modify the script at tests/scripts/all.sh to export the variable
MAKEFLAGS with -j if it was not set before. This should decrease the
total runtime of tests/scripts/all.sh by letting make run multiple jobs
in parallel. Also, add a check at the top of the script to cause a
failure if the environment is not Linux.
Fix potential integer overflows in the following functions:
* mbedtls_md2_update() to be bypassed and cause
* mbedtls_cipher_update()
* mbedtls_ctr_drbg_reseed()
This overflows would mainly be exploitable in 32-bit systems and could
cause buffer bound checks to be bypassed.
Fix an incorrect condition in ssl_check_ctr_renegotiate() that compared
64 bits of record counter instead of 48 bits as described in RFC 6347
Section 4.3.1. This would cause the function's return value to be
occasionally incorrect and the renegotiation routines to be triggered
at unexpected times.
The tests load certificate chains from files. The CA chains contain a
past or future certificate and an invalid certificate. The test then
checks that the flags set are MBEDTLS_X509_BADCERT_EXPIRED or
MBEDTLS_X509_BADCERT_FUTURE.
Add a test to ssl-opt.sh to ensure that in DTLS a 6 byte record counter
is compared in ssl_check_ctr_renegotiate() instead of a 8 byte one as in
the TLS case. Because currently there are no testing facilities to check
that renegotiation routines are triggered after X number of input/output
messages, the test consists on setting a renegotiation period that
cannot be represented in 6 bytes, but whose least-significant byte is 2.
If the library behaves correctly, the renegotiation routines will be
executed after two exchanged.
Fixes strict C99 builds in all.sh with glibc version >2.19 where platform support
wasn't being compiled in automatically.
Also fixes C99 syntax with armclang.
Pull Request #533 - Use MAKEFLAGS to pass args to make in all.sh
Modify the script at tests/scripts/all.sh to export the variable
MAKEFLAGS with -j if it was not set before. This should decrease the
total runtime of tests/scripts/all.sh by letting make run multiple jobs
in parallel. Also, add a check at the top of the script to cause a
failure if the environment is not Linux.w
Changes use of mklink in Windows test builds, to create junctions instead of
directory symbolic links. This removes the need for an elevated command prompt
when running cmake to create the Visual Studio project files.
Tighten up the test options in all.sh, test-ref-configs.pl and curves.pl
to ensure the builds are strict for all warnings, warnings are treated
as errors, and that wherever possible builds are strict to the C99
standard. (Note that builds that use the Unix sockets API cannot be).
The PKCS#1 standard says nothing about the relation between P and Q
but many libraries guarantee P>Q and mbed TLS did so too in earlier
versions.
This commit restores this behaviour.
Fixes the test suites to consistently use mbedtls_fprintf to output to
stdout or stderr.
Also redirects output from the tests to /dev/null to avoid confusing
output if the test suite code or library outputs anything to stdout.
Minor fixes following review including:
* formatting changes including indentation and code style
* corrections
* removal of debug code
* clarification of code through variable renaming
* memory leak
* compiler warnings
The library/net.c and its corresponding include/mbedtls/net.h file are
renamed to library/net_sockets.c and include/mbedtls/net_sockets.h
respectively. This is to avoid naming collisions in projects which also
have files with the common name 'net'.
The PKCS#1 standard says nothing about the relation between P and Q
but many libraries guarantee P>Q and mbed TLS did so too in earlier
versions.
This commit restores this behaviour.
Fixes the test suites to consistently use mbedtls_fprintf to output to
stdout or stderr.
Also redirects output from the tests to /dev/null to avoid confusing
output if the test suite code or library outputs anything to stdout.
Minor fixes following review including:
* formatting changes including indentation and code style
* corrections
* removal of debug code
* clarification of code through variable renaming
* memory leak
* compiler warnings
The library/net.c and its corresponding include/mbedtls/net.h file are
renamed to library/net_sockets.c and include/mbedtls/net_sockets.h
respectively. This is to avoid naming collisions in projects which also
have files with the common name 'net'.
Modify the script at tests/scripts/all.sh to export the variable
MAKEFLAGS with -j if it was not set before. This should decrease the
total runtime of tests/scripts/all.sh by letting make run multiple jobs
in parallel. Also, add a check at the top of the script to cause a
failure if the environment is not Linux.
Changes to allow the entropy tests to work for configurations without an
entropy seed file (MBEDTLS_ENTROPY_NV_SEED), and with no entropy sources
configured (MBEDTLS_TEST_NULL_ENTROPY).
In some tests in ssl-opt.sh the client finishes sooner and the server
gets killed before it could reach certain errors. Consequently the
the script doesn't find the error it is looking for and the test fails.
To resolve this issue, we introduce a per-test option to wait after the
client finishes.
Instead of polling the hardware entropy source a single time and
comparing the output with itself, the source is polled at least twice
and make sure that the separate outputs are different.
The self test is a quick way to check at startup whether the entropy
sources are functioning correctly. The self test only polls 8 bytes
from the default entropy source and performs the following checks:
- The bytes are not all 0x00 or 0xFF.
- The hardware does not return an error when polled.
- The entropy does not provide data in a patter. Only check pattern
at byte, word and long word sizes.
In the test script tests/scripts/all.sh the armcc build is a baremetal build
and doesn't use MBEDTLS_HAVE_TIME therefore the test configuration
MBEDTLS_PLATFORM_TIME_ALT which is dependent on it must be unset.
The test script tests/scripts/all.sh exits on first error, although it also
attempted to redirect error output from armcc and then output it after armcc
had completed. This never occurred because as soon as armcc failed the script
would end and the redirected output wouldn't be displayed.
This change removes that redirection.
* Add script to print build environment info.
The new script is also included in:
- all.sh
- basic-build-test.sh
* Tidy up environment reporting script.
Changes include:
- making the echo calls portable
- removing unnecessary brackets
- using more efficient checks for the existance of commands
- correcting typos and copyright year
* Update references to output_env.sh
MBEDTLS_ENTROPY_NV_SEED is dependent on platform code unless an
alternative implementation is provided, therefore needs to be disabled
in the disabled filesystem IO build.
A standard 'test' that writes a seed file is added so that regular tests
still can succeed. This is in lieu of a 'SUITE_PRE_CODE' kind of
arrangement where a suite can run code before (and after) all other code
runs.
A test is added that checks if we can read and write the standard NV
seed file
A test is added that actually checks if the entropy and seed file values
that are the result of just using the NV seed are the same as the manual
calculation.
Running valgrind on: "DTLS client reconnect from same port: reconnect,
nbio" results in timeouts.
New version added that runs only under valgrind. Original only runs when
valgrind is not used
The glibc package recently enabled compressed debug symbols but valgrind doesn't
support them yet.
Results in messages like:
--14923-- WARNING: Serious error when reading debug info
--14923-- When reading debug info from /lib/x86_64-linux-gnu/ld-2.21.so:
--14923-- Ignoring non-Dwarf2/3/4 block in .debug_info
First line has 'error' in it which triggers some of the ssl-opt tests
The configuration MBEDTLS_MEMORY_BACKTRACE is intended for debug and
is not necessary for test coverage. Because it causes timing problems
in some tests the configuration has been removed as it's not present in
equivalent tests in the all.sh test script.
In order to reduce debugging time, allows you to only run interesting
tests (by number) from the commandline.
e.g. the command 'tests/ssl-opt.sh -n 246,258' will only run test 246
and 258 (as per the number in the log file names)
For a start, they don't even compile with Visual Studio due to strcasecmp
being missing. Secondly, on Windows Perl scripts aren't executable and have
to be run using the Perl interpreter directly; thankfully CMake is able to
find cygwin Perl straight away without problems.
