The functions mbedtls_pk_sign(), mbedtls_pk_sign_restartable(),
mbedtls_ecdsa_write_signature() and mbedtls_ecdsa_write_signature_restartable()
now take an extra parameter indicating the size of the output buffer for the
signature.
No change to RSA because for RSA, the output size is trivial to calculate.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix typos in the PBKDF2 documentation
Correct the constraints on PSA_KEY_USAGE_DERIVE and PSA_KEY_USAGE_VERIFY_DERIVATION, aligning them with the note against psa_key_derivation_input_key(). All key inputs must have the required usage flag to permit output or verification.
Correct the constraints on PSA_KEY_DERIVATION_INPUT_SECRET and PSA_KEY_DERIVATION_INPUT_PASSWORD, aligning them with 4feb611. psa_key_derivation_verify_key() does not require the secret/password input to be a key.
Signed-off-by: Andrew Thoelke <andrew.thoelke@arm.com>
Without this parameter, it would be hard for callers to know how many bytes
of output the function wrote into the output buffer. It would be possible,
since the cumulated output must have the same length as the cumulated input,
but it would be cumbersome for the caller to keep track.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Hashes used in RSA-PSS encoding (EMSA-PSS-ENCODE, see §9.1.1 in RFC
8017):
- H1: Hashing the message (step 2)
- H2: Hashing in the salt (step 6)
- H3: Mask generation function (step 9)
According to the standard:
- H1 and H2 MUST be done by the same hash function
- H3 is RECOMMENDED to be the same as the hash used for H1 and H2.
According to the implementation:
- H1 happens outside of the function call. It might or might not happen
and the implementation might or might not be aware of the hash used.
- H2 happens inside the function call, consistency with H1 is not
enforced and might not even be possible to detect.
- H3 is done with the same hash as H2 (with the exception of
mbedtls_rsassa_pss_verify_ext(), which takes a dedicated parameter for
the hash used in the MGF).
Issues with the documentation:
- The comments weren't always clear about the three hashes involved and
often only mentioned two of them (which two varied from function to
function).
- The documentation was giving the impression that the standard
recommends aligning H2 and H1 (which is not a recommendation but a
must).
Signed-off-by: Janos Follath <janos.follath@arm.com>
This saves some code when compiling for Thumb, where access to
fields with offset index > 127 requires intermediate address
computations. Frequently used fields should therefore be located
at the top of the structure, while less frequently used ones --
such as the export callback -- can be moved to the back.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Reverting some deleted tests and changing the deprecated algo
Deleting deprecated headers from /alt-dummy dir
Corrections to the comments
Removal of deleted functions from compat-2.x.h
Corrections to tests/data_files/Makefile
Signed-off-by: TRodziewicz <tomasz.rodziewicz@mobica.com>
For TLS, secp256k1 is deprecated by RFC 8422 §5.1.1. For X.509,
secp256k1 is not deprecated, but it isn't used in practice, especially
in the context of TLS where there isn't much point in having an X.509
certificate which most peers do not support. So remove it from the
default profile. We can add it back later if there is demand.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
TLS used to prefer larger curves, under the idea that a larger curve has a
higher security strength and is therefore harder to attack. However, brute
force attacks are not a practical concern, so this was not particularly
meaningful. If a curve is considered secure enough to be allowed, then we
might as well use it.
So order curves by resource usage. The exact definition of what this means
is purposefully left open. It may include criteria such as performance and
memory usage. Risk of side channels could be a factor as well, although it
didn't affect the current choice.
The current list happens to exactly correspond to the numbers reported by
one run of the benchmark program for "full handshake/s" on my machine.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We stated that curves were listed "in order of preference", but we never
explained what the preference was, so this was not meaningful.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
MBEDTLS_ECP_WINDOW_SIZE is a compromise between memory usage (growing based
on the value) and performance (faster with larger values). There are
disminishing returns as the value grows larger. Based on Manuel's benchmarks
recorded in https://github.com/ARMmbed/mbedtls/issues/4127, 4 is a good
compromise point, with larger values bringing little advantage. So reduce
the default from 6 to 4.
Document the default value as in optimized for performance mostly, but don't
document the specific value, so we may change it later or make it
platform-dependent.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Upgrade the default list of hashes and curves allowed for TLS. The list is
now aligned with X.509 certificate verification: hashes and curves with at
least 255 bits (Curve25519 included), and RSA 2048 and above.
Remove MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE which would no
longer do anything.
Document more precisely what is allowed by default.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Upgrade the default X.509 certificate verification profile
mbedtls_x509_crt_profile_default to the former value of
mbedtls_x509_crt_profile_next, which is hashes and curves with at least 255
bits (Curve25519 included), and RSA 2048 and above.
Document more precisely what goes into the default profile.
Keep the "next" profile unchanged for now.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This makes it easier to ensure that crypto_spe.h is included everywhere it
needs to be, and that it's included early enough to do its job (it must be
included before any mention of psa_xxx() functions with external linkage,
because it defines macros to rename these functions).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
These fields are supposed to be manipulated directly, that's how people
create custom profiles.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
It was used to remove the code used when mbedtls_ecp_mul() received a
NULL RNG parameter. This code is no longer relevant (as the RNG may no
longer be NULL) and will be unconditionally removed in the next commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This is necessary for the case where the public part of an EC keypair
needs to be computed from the private part - either because it was not
included (it's an optional component) or because it was compressed (a
format we can't parse).
This changes the API of two public functions: mbedtls_pk_parse_key() and
mbedtls_pk_parse_keyfile().
Tests and programs have been adapted. Some programs use a non-secure RNG
(from the test library) just to get things to compile and run; in a
future commit this should be improved in order to demonstrate best
practice.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
- mbedtls_ecp_check_pub_priv() because it calls ecp_mul()
- mbedtls_pk_check_pair() because it calls the former
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Fix trivial faulty calls in ECP test suite and ECP/ECJPAKE self-tests (by
adding a dummy RNG).
Several tests suites are not passing yet, as a couple of library
function do call ecp_mul() with a NULL RNG. The complexity of the fixes
range from "simple refactoring" to "requires API changes", so these will
be addressed in separate commits.
This makes the option MBEDTLS_ECP_NO_INTERNAL_RNG, as well as the whole
"internal RNG" code, obsolete. This will be addressed in a future
commit, after getting the test suites to pass again.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Not adding a check in the code here, as this will be checked by the
lower-level modules.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
No change here, these were already mandatory, it just wasn't explicit in
the documentation.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Commit removes the
MBEDTLS_SSL_TRUNCATED_HMAC config option from config.h
and places a check that it is unset in check_config.h.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
mbedtls_dhm_get_value can be seen as either a copy function or a getter
function. Given the name and the semantics, it's more of a getter, even if
it "gets" by doing a copy. Therefore, put the context first, and the
selector next, leaving the output for last.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The Mbed TLS code relies heavily on reading certain fields of
mbedtls_ecp_group directly. Make these fields public. Require
that MBEDTLS_ECP_ALT alternative implementations have them.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add two functions mbedtls_dhm_get_len() and mbedtls_dhm_get_bitlen() to
query the length of the modulus in bytes or bits.
Remove the len field: the cost of calling mbedtls_dhm_get_len() each time
it's needed is negligible, and this improves the abstraction of the DHM
module.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
MBEDTLS_ECP_MAX_BITS doesn't make sense as a configuration option: it
must not be smaller than the largest supported curve, and it's useless
to set it to a larger value. So unconditionally set it to the size of
the largest supported curve. Remove it from the build configuration.
Alternative implementations must no longer need define this macro.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Conflicts:
include/mbedtls/ssl.h
include/psa/crypto_struct.h
Conflicts fixed by using the code from development branch
and manually re-applying the MBEDTLS_PRIVATE wrapping.
Mbed OS now provides POSIX-like time functions, although not alarm() nor
signal(). It is possible to implement MBEDTLS_TIMING_ALT on Mbed OS, so
we should not artificially prevent this in check-config. Remove the the
check that prevents implementing MBEDTLS_TIMING_ALT on Mbed OS.
Note that this limitation originally was added in the following commit,
although there isn't much context around why the restriction was
imposed: 63e7ebaaa1 ("Add material for generating yotta module"). In
2015, Mbed OS was quite a different thing: no RTOS, no threads, just an
asynchronous event loop model. I'd suppose the asynchronous event loop
model made it difficult before to implement MBEDTLS_TIMING_C on Mbed OS,
but that is no longer the case.
Fixes#4633
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
Removing reference to RFC 7748 as it is more confusing than helpful. (It
decodes the scalars after masking which is not part of the encoding we
want to specify. Also, it has the explanation what it means by little
endian in a preceding section that is not trivial to find.)
We also explicitly specify constraint on leading zeroes.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The expression "the masking is omitted" assumes familiarity with
Montgomery curve private key format and even then can be confusing and
ambiguous or confusing.
Describe directly what format we mean and add some more background
information and reference to the standard as well.
Signed-off-by: Janos Follath <janos.follath@arm.com>
4-space indent is only guaranteed to result in a code block if there's a
blank line just before (details vary depending on the markdown
implementation, and doxygen isn't exactly markdown anyway). In a bullet
list, you need 8 spaces since the list itself is a nested construct
which takes a 4-space indent (even though you don't have to indent
continuation lines inside a bullet point by 4 spaces, 1 is enough).
Using \code...\encode which is rendering as intended.
Signed-off-by: Janos Follath <janos.follath@arm.com>
This level of detail can be confusing and could require even more detail
to clear it up. Simplifying it instead in alignment wiht the
documentation of existing setup functions.
Signed-off-by: Janos Follath <janos.follath@arm.com>
This reverts commit 03a5fd7780026b2ca0b4728352ded930f5a7cff9.
We're already calling the output of a PAKE a "shared secret". The
password is a shared secret (for PAKE where the verifier knows a
password-equivalent secret), but calling it "shared secret" or even just
"secret" would be confusing.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Technically this function takes a low entropy secret as an input which
might or might not be the password. Using the term "secret" in the
function name is less misleading.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The password stretching (using slow and/or memory hard hashes) in PAKEs
usually serves two purposes:
- Defending against server compromise impersonation attacks. J-PAKE is an
augmented PAKE and as such, stores a password-equivalent and defending
against this class of attacks is out of scope.
- Preventing offline dictionary attacks. J-PAKE is proven to be zero
knowledge and leaks no information beyond the fact if the passwords
matched and offline dictionary attack is not possible.
In summary: J-PAKE does not benefit from pasword stretching and is
unlikely to be an input. This part of the API is not necessary at this
point and can be added later.
Signed-off-by: Janos Follath <janos.follath@arm.com>
We are not confident about the stability of the PAKE interface (it is
just a proposal, not part of the standard yet). So we should explicitly
document it as experimental, subject to change.
Signed-off-by: Janos Follath <janos.follath@arm.com>
At this point this is a proposed PAKE interface for the PSA Crypto API
and not part of the official standard. Place the interface in
crypto_extra.h to make this clear.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The API has PSA_ALG_GCM and not PSA_ALG_AEAD_GCM, PSA_ALG_MD5 and not
PSA_ALG_HASH_MD5, etc., so PSA_ALG_PAKE_JPAKE should be PSA_ALG_JPAKE as
well.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The caller is likely to receive the inputs on the wire, and having a
known size for which they can confidently reject longer inputs would be
helpful in cases where the application can't just use the input in
place.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Define the size macros to 0 rather than empty. That will lead to fewer
weird errors when we start implementing.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Remove padding parameters as mbedtls_rsa_init()
cannot return an error code when padding
parameters are invalid.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
mbedtls_rsa_set_padding() now returns the error
code MBEDTLS_ERR_RSA_INVALID_PADDING when
padding parameters are invalid.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
ssl_server2 had a check that we never try to use a minor version lower
than 2 with DTLS, but that check is no longer needed, as there's no way
that would happen now that MBEDTLS_SSL_MINOR_VERSION_1 is no longer
public.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This commit removes the API
```
mbedtls_ssl_conf_ciphersuites_for_version()
```
which allows to configure lists of acceptable ciphersuites
for each supported version of SSL/TLS: SSL3, TLS 1.{0,1,2}.
With Mbed TLS 3.0, support for SSL3, TLS 1.0 and TLS 1.1
is dropped. Moreover, upcoming TLS 1.3 support has a different
notion of cipher suite and will require a different API.
This means that it's only for TLS 1.2 that we require
a ciphersuite configuration API, and
```
mbedtls_ssl_conf_ciphersuites()
```
can be used for that. The version-specific ciphersuite
configuration API `mbedtls_ssl_conf_ciphersuites_for_version()`,
in turn, is no longer needed.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Note that this error has a negligible probability with a "crypto-sized"
bound, but macroscopic probability with a small bound.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Since mbedtls_mpi_random() is not specific to ECC code, move it from
the ECP module to the bignum module.
This increases the code size in builds without short Weierstrass
curves (including builds without ECC at all) that do not optimize out
unused functions.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Make input/output format documentation easier to find:
- Add direct reference to the steps from the input/output functions
- Move the format description directly to the step constants
Signed-off-by: Janos Follath <janos.follath@arm.com>
- Transformed setup description to a more explicit pseudocode based
approach.
- Explained implicit vs explicit key confirmation
Signed-off-by: Janos Follath <janos.follath@arm.com>
This step is not necessarily a memory-hard function. Memory-hard
functions are the best of the breed at the moment, but that's due to
current hardware designs, and CPU-hard-but-not-memory-hard functions
like PBKDF2 are acceptable as well. We're using “key stretching” as the
generic term for such functions.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The key derivation operation passed to psa_pake_set_password_mhf() might
enter an error state before the function returns. If this happens, the
user needs to know about it so that they can properly abort it.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The type of the key derivation operation was incorrect.
Also neither the PAKE nor key_derivation algorithm knows how many bytes
to transfer at this stage.
There is no optimal or recommended size, PAKEs don't mandate it either
(with the exception of OPAQUE, but that uses it internally and won't be
using this interface).
Adding an input length parameter to allow the application to control how
many bytes the PAKE takes from the key derivation.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Using memory hard functions with PAKEs is the more secure option. It
should be as convenient and efficient to use as less secure options, but
so far it required creating an additional temporary key object.
With psa_pake_set_password_mhf() this eliminates the need for this.
Similarly we could add a convenience function to supply the password
directly from character strings, but that would make the less secure
option more convenient again and therfore we are not doing it now.
Signed-off-by: Janos Follath <janos.follath@arm.com>
PAKE constructions that have multiple key shares will always consume and
produce the key shares in numerical order. So using PSA_PAKE_DATA_XXX_X
would demand step-sequence validation, and provides no functional
utility over having only PSA_PAKE_DATA_XXX.
Signed-off-by: Janos Follath <janos.follath@arm.com>
If PSA_PAKE_OUTPUT_SIZE takes cipher_suite as a parameter and it is a
structure it can't be a compile-time constant anymore.
Reintroducing psa_pake_primitive_t, because it can be constructed as an
integral type and holds enough information to allow PSA_PAKE_OUTPUT_SIZE
calculating accurate estimates on the output size in compile time.
Signed-off-by: Janos Follath <janos.follath@arm.com>
There are too many parameters to the setup function. This makes it hard
to figure out how to call the function and read code that calls the
function. This also opens the suspicion that there's yet another
parameter that we're missing.
Signed-off-by: Janos Follath <janos.follath@arm.com>
