what architecture name is shown in a symbol file's MODULE line, but the Mac
crash_report tool's on_demand_symbol_supplier does. The new Mac dumper
inadvertently used i386. Correct that to make it x86. Temporarily make the
on_demand_symbol_supplier accept symbol files whose architecture is i386.
Also add x86_64 to the set of architectures that the on_demand_symbol_supplier
considers valid.
BUG=none
TEST=none
Review URL: http://breakpad.appspot.com/143001
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@638 4c0a9323-5329-0410-9bdc-e9ce6186880e
Inspector::ReadMessages as was done before r627. The "hello" message contains
the parameter count and is referenced while the message reader loops through
parameter messages. Prior to r627, both messages were named |message|, which
was confusing, probably caused a compiler warning, and apparently provided the
motivation to share them. This caused the crash inspector to fail to properly
collect the parameters. The common failure mode (although others are possible)
was for the inspector to attempt tor read more parameter messages than were
available, resulting in an IPC timeout and inspector death. No crash report
would be written, and the application expecting its crash to be inspected
would time out waiting for a response from the inspector and then _exit. This
is effectively a failure to properly handle crashes.
The inner message is reintroduced, and named parameter_message for
disambiguation.
BUG=chromium:49821
TEST=Crashes catchable by the Mac Breakpad framework
Review URL: http://breakpad.appspot.com/123002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@628 4c0a9323-5329-0410-9bdc-e9ce6186880e
This patch avoids allocating many copies of identical strings appearing in
debugging information. Without this patch, running dump_syms on Mozilla's
libxul.so (with 173MiB of debugging information) has a peak resident set of
around 450MiB. With this patch, the peak is around 365MiB.
a=jimblandy, r=mark
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@626 4c0a9323-5329-0410-9bdc-e9ce6186880e
At present, the Linux symbol dumper maps the ELF file into memory to
examine the debugging information it contains, but then also calls
google_breakpad::FileID::ElfFileIdentifier, which maps the ELF file into
memory again. Some of our object files are large; Mozilla's libxul.so is
1.1GiB. Trying to map such files twice can interfere with tools like
valgrind that map themselves into high addresses (in an attempt to stay out
of the way of ordinary programs).
The FileID class has another method, ElfFileIdentifierFromMappedFile, that
operates on an already-loaded image of the file; use that instead.
a=jimblandy, r=thestig
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@625 4c0a9323-5329-0410-9bdc-e9ce6186880e
This patch avoids unnecessary use of the <cfoo> headers in files that don't
actually use the identifiers they declare in the std:: namespace.
It also changes some files to better conform with the "Names and Order of
Includes" rules in the Google C++ Style Guide.
A=jimb R=mark
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@619 4c0a9323-5329-0410-9bdc-e9ce6186880e
I came across a bunch of comments Neal had made on issue 55011 that I
hadn't addressed. This patch takes care of them.
A=jimb R=thestig
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@618 4c0a9323-5329-0410-9bdc-e9ce6186880e
The dwarf_cu_to_module_unittest and bytereader_unittest test executables
include object files from which they use no code.
A=jimb R=thestig
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@617 4c0a9323-5329-0410-9bdc-e9ce6186880e
This patch adds all the appropriate symbol dumper unit tests to the Mac
XCode dump_syms project. This allows us to test this code on a 64-bit
platform.
A=jimb R=mark
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@616 4c0a9323-5329-0410-9bdc-e9ce6186880e
The subclasses of CallFrameInfo::Rule store the rule currently in
force for recovering a register or computing the canonical frame
address. Their sole responsibility is to accurately convey rules from
the parser, which creates them, to a CallFrameInfo::Handler member
function, which consumes them. So, the types of their data members
should match those of the corresponding arguments of the corresponding
Handler member function.
CallFrameInfo::OffsetRule and CallFrameInfo::ValOffsetRule use an
'int' to store the rule's offset value, but
CallFrameInfo::Handler::OffsetRule and ...::ValOffsetRule expect a
'long'. On ABIs where 'long' is larger than 'int', this can cause
values to be truncated or sign-extended unexpectedly.
This patch changes those members to 'long'.
Fortunately, offsets appearing in real DWARF call frame information
never even come close to the limits of a 32-bit int, so this bug is
unlikely to cause any practical problems.
A=jimb R=thestig
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@615 4c0a9323-5329-0410-9bdc-e9ce6186880e
This patch rewrites the Mac symbol dumper to use the same set of classes
the Linux dumper does for reading debugging information from various
sources, consolidating them into a single table, and writing that out as a
Breakpad symbol file.
In the process, it also adds support for dumping DWARF call frame
information and .eh_frame exception-handling information as Breakpad 'STACK
CFI' records. This allows the Breakpad processor to generate stack traces
from code compiled with -fomit-frame-pointer.
The patch also replaces the DumpSymbols Objective C++ class with
google_breakpad::DumpSymbols, a plain C++ class. The code still uses some
Objective C++ to use the Foundation facilities for dealing with file names
in a file-system-independent fashion, and for examining the contents of
.dSYM bundles.
Since the code has been entirely rewritten, I have changed the author
lines.
A=jimb R=mark
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@614 4c0a9323-5329-0410-9bdc-e9ce6186880e
The #inclusions of <elf.h> and <link.h> were inherited from older code, but
the current code doesn't need anything from them, so they should be
removed.
A=jimb R=thestig
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@613 4c0a9323-5329-0410-9bdc-e9ce6186880e
For some reason, Mac OS X places DWARF debugging information in sections
whose names begin with "__", rather than the names beginning with "." given
in the DWARF spec. This patch changes google_breakpad::DwarfCUToModule to
look for line number information under both names.
A=jimb R=mark
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@612 4c0a9323-5329-0410-9bdc-e9ce6186880e
Instead of using bzero in main, use constructors to initialize the
Options structure.
Use C++ bool, not Objective-C BOOL.
Use a const NXArchInfo * to represent the architecture name, so that we can
use the NXGetLocalArchInfo, NXGetArchInfoFromName, etc. to handle things.
Delete the 'uuidStr' member; it is unused.
Leave Options::srcPath as an NSString, so that we can continue to use the
filesystem path abstraction methods provided by the Foundation framework.
A=jimb R=mark
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@611 4c0a9323-5329-0410-9bdc-e9ce6186880e
This patch adds files defining new classes in the google_breakpad::Mach_O
namespace for parsing fat binaries and Mach-O files. These are used in the
new dumper to handle STABS debugging information, DWARF call frame
information, and .eh_frame exception handling stack walking information.
These new classes are independent of endianness and word size, and
therefore can be used on binaries of all the relevant architectures: x86,
x86_64, ppc, and ARM.
The patch adds a complete set of unit tests for the new classes.
A=jimb R=mark (http://breakpad.appspot.com/93001/show, http://breakpad.appspot.com/115001/show)
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@610 4c0a9323-5329-0410-9bdc-e9ce6186880e
Created the exception_handler_test that test the generation of dump and the dumps themselves.
Moved all dump analysis code from minidump to its right class DumpAnalysis. The class is used by both minidump_test and exception_handler_test. The tests are way simpler that way (ie. no handling of HANDLE).
minidump_test now uses the minidump_generator class instead of using Win32. It works well and pass all tests.
exception_handler now passes both the exception and assertion infos to the client to generate the dump. If one is NULL it's going to be handled correctly.
crash_generation_client can now RequestDump with both exception and assertion info.
minidump_generator returns both the mini and full dump string pointers, and output both (or either) depending on which was generated.
All original interfaces and method signature are still there, but call the new functions if possible.
Review URL: http://codereview.chromium.org/1994015
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@596 4c0a9323-5329-0410-9bdc-e9ce6186880e
I had to remove the dependency from base (was using FilePath and ScopedHandle, replaced them by standard std::wstring and HANDLE). Also removed the logging and the main from the original files.
This will serve as a base for testing breakpad's dump generation. It is kept like this for easier tracking.
Review URL: http://codereview.chromium.org/1964006
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@592 4c0a9323-5329-0410-9bdc-e9ce6186880e
