Breakpad can be used on processes where a mistaken
library saves then restores one of our signal handlers
with 'signal' instead of 'sigaction'.
This loses the SA_SIGINFO flag associated with the
Breakpad handler, and in some cases (e.g. Android/ARM
kernels), the values of the 'info' and 'uc' parameters
that ExceptionHandler::SignalHandler() receives will
be completely bogus, leading to a crash when the function
is executed (and of course, no minidump generation).
To work-around this, have SignalHandler() check the state
of the flag. If it is incorrectly unset, re-register with
'sigaction' and the correct flag, then return. The signal
will be re-thrown, and this time the function will be
called with the correct values.
Review URL: https://breakpad.appspot.com/481002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1067 4c0a9323-5329-0410-9bdc-e9ce6186880e
- One of the unit test binaries refused to link due to
missing linker flags.
- The WriteDSODebug() function now works on Android, so
do not special-case it anymore.
- Ensure android/run-checks.sh will complain properly if
the client unit test suite fails on Android. It used to
consider that such failures were acceptable. Note that
it still considers failures when running the tools and
processor test suite on the device normal (fixing this
is a lot harder, and these parts of Breakpad typically
never run on a device, but on the host).
Review URL: https://breakpad.appspot.com/482002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1066 4c0a9323-5329-0410-9bdc-e9ce6186880e
Currently, if a thread's stack pointer is not within a valid memory page,
the minidump writing will fail with an error. This change allows an invalid
stack pointer by simply setting the memory size to zero in the minidump.
The processing code already checks for the size being zero, although it
currently just gives an error (see https://breakpad.appspot.com/413002/).
BUG=google-breakpad:499, chromium-os:34880
TEST=make check, manually ran minidump-2-core and core2md
Review URL: https://breakpad.appspot.com/478002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1065 4c0a9323-5329-0410-9bdc-e9ce6186880e
to add it to the specifications table. Record the fully-qualified name
provided by the demangler in the table.
A=Rafael Ávila de Espíndola <respindola@mozilla.com> R=jimb at https://breakpad.appspot.
com/478004/
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1062 4c0a9323-5329-0410-9bdc-e9ce6186880e
NXGetArchInfoXXX depends on the OS knowledge of architecture. This CL adds a
custom implementation of those methods to be able to handle newer CPU before
they are handled by the OS. It also add handling for armv7s architecture.
Review URL: https://breakpad.appspot.com/475002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1057 4c0a9323-5329-0410-9bdc-e9ce6186880e
next_offset is unsigned, comparing it >= 0 is always true. Instead,
compare the numbers whose difference makes next_offset.
Patch by Richard Trieu.
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1040 4c0a9323-5329-0410-9bdc-e9ce6186880e
This patch updates README.ANDROID, since the client library
now supports directly generating a minidump without raising
a signal, and that it builds and runs fine on Android/x86.
+ Formatting fixes in minidump_writer_unittest.cc
Review URL: https://breakpad.appspot.com/446002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1026 4c0a9323-5329-0410-9bdc-e9ce6186880e
If none of the installed ExceptionHandlers handle a signal (their
FilterCallbacks or HandlerCallbacks all return false), then the signal
should be delivered to the signal handlers that were previously
installed.
This requires that old_handlers_ become a static vector so that we can
restore the handlers in the static HandleSignal.
Currently it is also restoring signals in ~ExceptionHandler (if there
are no others). This should not be required since our documentation
states that a process can only have one ExceptionHandler for which
install_handlers is true (and so we get the correct behavior if we
simply leave our handlers installed forever), but even the tests
themselves violate that.
Patch by Chris Hopman <cjhopman@chromium.org>
Review URL: https://breakpad.appspot.com/440002/
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1025 4c0a9323-5329-0410-9bdc-e9ce6186880e
This adds a minimalistic implementation of getcontext()
for Android/ARM and Android/x86. The provided code is
in assembly and only implements the bare minimum required
by Breakpad to get the current processor state.
Note that:
- The FPU state is not saved to the ucontext_t on ARM.
(that's actually the main difference with a normal
getcontext() implementation).
This is normal. On Linux/ARM, such state must be
obtained with PTRACE_GETVFPREGS instead. This will
be implemented in a future patch.
- On x86, only the 'regular' FPU state is saved, to
mimic the GLibc/i386 implementation. The state of
SSE/SSE2/etc registers is not part of the upstream
getcontext() implementation.
Review URL: https://breakpad.appspot.com/444002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1024 4c0a9323-5329-0410-9bdc-e9ce6186880e
This patch allows 'make check' to work when performing
an Automake-based build of Breakpad for Android. This
requires to have an Android device connected, and the
'adb' tool in your path.
You can test that with something like:
configure --host=arm-linux-androideabi
make check
This is achieved by adding a new small shell script
under android/test-shell.sh, which is invoked by the
Makefile (see TESTS_ENVIRONMENT definition in
Makefile.am).
By default, this runs all unit tests, including those
for the processor and tools (which normally never run
on an Android device).
Note that the test suites fails (e.g. 11 failing tests
for the client library). This will be addressed in later
patches.
+ Modify android/run-checks.sh to run the client library
test suite on the device by default.
+ Add a new option (--all-tests) to android/run-checks.sh
which forces it to run the unit test suite for the host
binaries, and the full suite on the Android device.
+ Update README.ANDROID appropriately.
Review URL: https://breakpad.appspot.com/441002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1023 4c0a9323-5329-0410-9bdc-e9ce6186880e
This patch contains the source-related fixes to ensure that
the Breakpad unit tests build properly when targetting Android.
Calling 'make check' still fails because there is still no
way to run the unit test programs on a device. This will be
addressed by a future patch.
Important notes:
- You must target Android API level 9 (Gingerbread) or higher
to build the unit tests. This requirement is due to the
current GTest revision used in the breakpad source tree.
- This patch adds headers providing inlined C library functions
missing from the NDK (see src/common/android/testing). They
are inlined to avoid modifying Makefile.am and other build
files.
- Similarly, the <wchar.h> header-fix under
src/common/android/testing/include is only required by
GTest's current revision. E.g. it's not needed when building
Breakpad as part of Chromium which uses a more up-to-date
revision.
Review URL: https://breakpad.appspot.com/439002
git-svn-id: http://google-breakpad.googlecode.com/svn/trunk@1020 4c0a9323-5329-0410-9bdc-e9ce6186880e
