cf975f5988
On Xcode 4.x and above (I tested Xcode 4.6.3 on 10.7.5 and Xcode 5.5.1 on 10.9.2), cmake (2.8.12.2, whether from MacPorts or from clang.org, FWIW) is detecting /usr/bin/cc as Clang, but CMAKE_COMPILER_IS_CLANG is not getting set, so the tests aren't being built. (There may have been other build problems as well, but the fact that the tests weren't being built was by far the most obvious problem.) Checking the compiler ID detected by cmake, rather than the name of the command used to invoke the compiler, fixes this.
1126 lines
49 KiB
Text
1126 lines
49 KiB
Text
PolarSSL ChangeLog (Sorted per branch, date)
|
|
|
|
= PolarSSL 1.3 branch
|
|
Features
|
|
* debug_set_log_mode() added to determine raw or full logging
|
|
* debug_set_threshold() added to ignore messages over threshold level
|
|
* version_check_feature() added to check for compile-time options at
|
|
run-time
|
|
|
|
Changes
|
|
* POLARSSL_CONFIG_OPTIONS has been removed. All values are individually
|
|
checked and filled in the relevant module headers
|
|
* Debug module only outputs full lines instead of parts
|
|
* Better support for the different Attribute Types from IETF PKIX (RFC 5280)
|
|
* AES-NI now compiles with "old" assemblers too
|
|
* Ciphersuites based on RC4 now have the lowest priority by default
|
|
|
|
Bugfix
|
|
* Only iterate over actual certificates in ssl_write_certificate_request()
|
|
(found by Matthew Page)
|
|
* Typos in platform.c and pkcs11.c (found by Daniel Phillips and Steffan
|
|
Karger)
|
|
* cert_write app should use subject of issuer certificate as issuer of cert
|
|
* Fix false reject in padding check in ssl_decrypt_buf() for CBC
|
|
ciphersuites, for full SSL frames of data.
|
|
* Improve interoperability by not writing extension length in ClientHello /
|
|
ServerHello when no extensions are present (found by Matthew Page)
|
|
* rsa_check_pubkey() now allows an E up to N
|
|
* On OpenBSD, use arc4random_buf() instead of rand() to prevent warnings
|
|
* mpi_fill_random() was creating numbers larger than requested on
|
|
big-endian platform when size was not an integer number of limbs
|
|
* Fix dependencies issues in X.509 test suite.
|
|
* Some parts of ssl_tls.c were compiled even when the module was disabled.
|
|
* Fix detection of DragonflyBSD in net.c (found by Markus Pfeiffer)
|
|
* Fix detection of Clang on some Apple platforms with CMake
|
|
(found by Barry K. Nathan)
|
|
|
|
= PolarSSL 1.3.6 released on 2014-04-11
|
|
|
|
Features
|
|
* Support for the ALPN SSL extension
|
|
* Add option 'use_dev_random' to gen_key application
|
|
* Enable verification of the keyUsage extension for CA and leaf
|
|
certificates (POLARSSL_X509_CHECK_KEY_USAGE)
|
|
* Enable verification of the extendedKeyUsage extension
|
|
(POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE)
|
|
|
|
Changes
|
|
* x509_crt_info() now prints information about parsed extensions as well
|
|
* pk_verify() now returns a specific error code when the signature is valid
|
|
but shorter than the supplied length.
|
|
* Use UTC time to check certificate validity.
|
|
* Reject certificates with times not in UTC, per RFC 5280.
|
|
|
|
Security
|
|
* Avoid potential timing leak in ecdsa_sign() by blinding modular division.
|
|
(Found by Watson Ladd.)
|
|
* The notAfter date of some certificates was no longer checked since 1.3.5.
|
|
This affects certificates in the user-supplied chain except the top
|
|
certificate. If the user-supplied chain contains only one certificates,
|
|
it is not affected (ie, its notAfter date is properly checked).
|
|
* Prevent potential NULL pointer dereference in ssl_read_record() (found by
|
|
TrustInSoft)
|
|
|
|
Bugfix
|
|
* The length of various ClientKeyExchange messages was not properly checked.
|
|
* Some example server programs were not sending the close_notify alert.
|
|
* Potential memory leak in mpi_exp_mod() when error occurs during
|
|
calculation of RR.
|
|
* Fixed malloc/free default #define in platform.c (found by Gergely Budai).
|
|
* Fixed type which made POLARSSL_ENTROPY_FORCE_SHA256 uneffective (found by
|
|
Gergely Budai).
|
|
* Fix #include path in ecdsa.h which wasn't accepted by some compilers.
|
|
(found by Gergely Budai)
|
|
* Fix compile errors when POLARSSL_ERROR_STRERROR_BC is undefined (found by
|
|
Shuo Chen).
|
|
* oid_get_numeric_string() used to truncate the output without returning an
|
|
error if the output buffer was just 1 byte too small.
|
|
* dhm_parse_dhm() (hence dhm_parse_dhmfile()) did not set dhm->len.
|
|
* Calling pk_debug() on an RSA-alt key would segfault.
|
|
* pk_get_size() and pk_get_len() were off by a factor 8 for RSA-alt keys.
|
|
* Potential buffer overwrite in pem_write_buffer() because of low length
|
|
indication (found by Thijs Alkemade)
|
|
* EC curves constants, which should be only in ROM since 1.3.3, were also
|
|
stored in RAM due to missing 'const's (found by Gergely Budai).
|
|
|
|
= PolarSSL 1.3.5 released on 2014-03-26
|
|
Features
|
|
* HMAC-DRBG as a separate module
|
|
* Option to set the Curve preference order (disabled by default)
|
|
* Single Platform compatilibity layer (for memory / printf / fprintf)
|
|
* Ability to provide alternate timing implementation
|
|
* Ability to force the entropy module to use SHA-256 as its basis
|
|
(POLARSSL_ENTROPY_FORCE_SHA256)
|
|
* Testing script ssl-opt.sh added for testing 'live' ssl option
|
|
interoperability against OpenSSL and PolarSSL
|
|
* Support for reading EC keys that use SpecifiedECDomain in some cases.
|
|
* Entropy module now supports seed writing and reading
|
|
|
|
Changes
|
|
* Deprecated the Memory layer
|
|
* entropy_add_source(), entropy_update_manual() and entropy_gather()
|
|
now thread-safe if POLARSSL_THREADING_C defined
|
|
* Improvements to the CMake build system, contributed by Julian Ospald.
|
|
* Work around a bug of the version of Clang shipped by Apple with Mavericks
|
|
that prevented bignum.c from compiling. (Reported by Rafael Baptista.)
|
|
* Revamped the compat.sh interoperatibility script to include support for
|
|
testing against GnuTLS
|
|
* Deprecated ssl_set_own_cert_rsa() and ssl_set_own_cert_rsa_alt()
|
|
* Improvements to tests/Makefile, contributed by Oden Eriksson.
|
|
|
|
Security
|
|
* Forbid change of server certificate during renegotiation to prevent
|
|
"triple handshake" attack when authentication mode is 'optional' (the
|
|
attack was already impossible when authentication is required).
|
|
* Check notBefore timestamp of certificates and CRLs from the future.
|
|
* Forbid sequence number wrapping
|
|
* Fixed possible buffer overflow with overlong PSK
|
|
* Possible remotely-triggered out-of-bounds memory access fixed (found by
|
|
TrustInSoft)
|
|
|
|
Bugfix
|
|
* ecp_gen_keypair() does more tries to prevent failure because of
|
|
statistics
|
|
* Fixed bug in RSA PKCS#1 v1.5 "reversed" operations
|
|
* Fixed testing with out-of-source builds using cmake
|
|
* Fixed version-major intolerance in server
|
|
* Fixed CMake symlinking on out-of-source builds
|
|
* Fixed dependency issues in test suite
|
|
* Programs rsa_sign_pss and rsa_verify_pss were not using PSS since 1.3.0
|
|
* Bignum's MIPS-32 assembly was used on MIPS-64, causing chaos. (Found by
|
|
Alex Wilson.)
|
|
* ssl_cache was creating entries when max_entries=0 if TIMING_C was enabled.
|
|
* m_sleep() was sleeping twice too long on most Unix platforms.
|
|
* Fixed bug with session tickets and non-blocking I/O in the unlikely case
|
|
send() would return an EAGAIN error when sending the ticket.
|
|
* ssl_cache was leaking memory when reusing a timed out entry containing a
|
|
client certificate.
|
|
* ssl_srv was leaking memory when client presented a timed out ticket
|
|
containing a client certificate
|
|
* ssl_init() was leaving a dirty pointer in ssl_context if malloc of
|
|
out_ctr failed
|
|
* ssl_handshake_init() was leaving dirty pointers in subcontexts if malloc
|
|
of one of them failed
|
|
* Fix typo in rsa_copy() that impacted PKCS#1 v2 contexts
|
|
* x509_get_current_time() uses localtime_r() to prevent thread issues
|
|
|
|
= PolarSSL 1.3.4 released on 2014-01-27
|
|
Features
|
|
* Support for the Koblitz curves: secp192k1, secp224k1, secp256k1
|
|
* Support for RIPEMD-160
|
|
* Support for AES CFB8 mode
|
|
* Support for deterministic ECDSA (RFC 6979)
|
|
|
|
Bugfix
|
|
* Potential memory leak in bignum_selftest()
|
|
* Replaced expired test certificate
|
|
* ssl_mail_client now terminates lines with CRLF, instead of LF
|
|
* net module handles timeouts on blocking sockets better (found by Tilman
|
|
Sauerbeck)
|
|
* Assembly format fixes in bn_mul.h
|
|
|
|
Security
|
|
* Missing MPI_CHK calls added around unguarded mpi calls (found by
|
|
TrustInSoft)
|
|
|
|
= PolarSSL 1.3.3 released on 2013-12-31
|
|
Features
|
|
* EC key generation support in gen_key app
|
|
* Support for adhering to client ciphersuite order preference
|
|
(POLARSSL_SSL_SRV_RESPECT_CLIENT_PREFERENCE)
|
|
* Support for Curve25519
|
|
* Support for ECDH-RSA and ECDH-ECDSA key exchanges and ciphersuites
|
|
* Support for IPv6 in the NET module
|
|
* AES-NI support for AES, AES-GCM and AES key scheduling
|
|
* SSL Pthread-based server example added (ssl_pthread_server)
|
|
|
|
Changes
|
|
* gen_prime() speedup
|
|
* Speedup of ECP multiplication operation
|
|
* Relaxed some SHA2 ciphersuite's version requirements
|
|
* Dropped use of readdir_r() instead of readdir() with threading support
|
|
* More constant-time checks in the RSA module
|
|
* Split off curves from ecp.c into ecp_curves.c
|
|
* Curves are now stored fully in ROM
|
|
* Memory usage optimizations in ECP module
|
|
* Removed POLARSSL_THREADING_DUMMY
|
|
|
|
Bugfix
|
|
* Fixed bug in mpi_set_bit() on platforms where t_uint is wider than int
|
|
* Fixed X.509 hostname comparison (with non-regular characters)
|
|
* SSL now gracefully handles missing RNG
|
|
* Missing defines / cases for RSA_PSK key exchange
|
|
* crypt_and_hash app checks MAC before final decryption
|
|
* Potential memory leak in ssl_ticket_keys_init()
|
|
* Memory leak in benchmark application
|
|
* Fixed x509_crt_parse_path() bug on Windows platforms
|
|
* Added missing MPI_CHK() around some statements in mpi_div_mpi() (found by
|
|
TrustInSoft)
|
|
* Fixed potential overflow in certificate size verification in
|
|
ssl_write_certificate() (found by TrustInSoft)
|
|
|
|
Security
|
|
* Possible remotely-triggered out-of-bounds memory access fixed (found by
|
|
TrustInSoft)
|
|
|
|
= PolarSSL 1.3.2 released on 2013-11-04
|
|
Features
|
|
* PK tests added to test framework
|
|
* Added optional optimization for NIST MODP curves (POLARSSL_ECP_NIST_OPTIM)
|
|
* Support for Camellia-GCM mode and ciphersuites
|
|
|
|
Changes
|
|
* Padding checks in cipher layer are now constant-time
|
|
* Value comparisons in SSL layer are now constant-time
|
|
* Support for serialNumber, postalAddress and postalCode in X509 names
|
|
* SSL Renegotiation was refactored
|
|
|
|
Bugfix
|
|
* More stringent checks in cipher layer
|
|
* Server does not send out extensions not advertised by client
|
|
* Prevent possible alignment warnings on casting from char * to 'aligned *'
|
|
* Misc fixes and additions to dependency checks
|
|
* Const correctness
|
|
* cert_write with selfsign should use issuer_name as subject_name
|
|
* Fix ECDSA corner case: missing reduction mod N (found by DualTachyon)
|
|
* Defines to handle UEFI environment under MSVC
|
|
* Server-side initiated renegotiations send HelloRequest
|
|
|
|
= PolarSSL 1.3.1 released on 2013-10-15
|
|
Features
|
|
* Support for Brainpool curves and TLS ciphersuites (RFC 7027)
|
|
* Support for ECDHE-PSK key-exchange and ciphersuites
|
|
* Support for RSA-PSK key-exchange and ciphersuites
|
|
|
|
Changes
|
|
* RSA blinding locks for a smaller amount of time
|
|
* TLS compression only allocates working buffer once
|
|
* Introduced POLARSSL_HAVE_READDIR_R for systems without it
|
|
* config.h is more script-friendly
|
|
|
|
Bugfix
|
|
* Missing MSVC defines added
|
|
* Compile errors with POLARSSL_RSA_NO_CRT
|
|
* Header files with 'polarssl/'
|
|
* Const correctness
|
|
* Possible naming collision in dhm_context
|
|
* Better support for MSVC
|
|
* threading_set_alt() name
|
|
* Added missing x509write_crt_set_version()
|
|
|
|
= PolarSSL 1.3.0 released on 2013-10-01
|
|
Features
|
|
* Elliptic Curve Cryptography module added
|
|
* Elliptic Curve Diffie Hellman module added
|
|
* Ephemeral Elliptic Curve Diffie Hellman support for SSL/TLS
|
|
(ECDHE-based ciphersuites)
|
|
* Ephemeral Elliptic Curve Digital Signature Algorithm support for SSL/TLS
|
|
(ECDSA-based ciphersuites)
|
|
* Ability to specify allowed ciphersuites based on the protocol version.
|
|
* PSK and DHE-PSK based ciphersuites added
|
|
* Memory allocation abstraction layer added
|
|
* Buffer-based memory allocator added (no malloc() / free() / HEAP usage)
|
|
* Threading abstraction layer added (dummy / pthread / alternate)
|
|
* Public Key abstraction layer added
|
|
* Parsing Elliptic Curve keys
|
|
* Parsing Elliptic Curve certificates
|
|
* Support for max_fragment_length extension (RFC 6066)
|
|
* Support for truncated_hmac extension (RFC 6066)
|
|
* Support for zeros-and-length (ANSI X.923) padding, one-and-zeros
|
|
(ISO/IEC 7816-4) padding and zero padding in the cipher layer
|
|
* Support for session tickets (RFC 5077)
|
|
* Certificate Request (CSR) generation with extensions (key_usage,
|
|
ns_cert_type)
|
|
* X509 Certificate writing with extensions (basic_constraints,
|
|
issuer_key_identifier, etc)
|
|
* Optional blinding for RSA, DHM and EC
|
|
* Support for multiple active certificate / key pairs in SSL servers for
|
|
the same host (Not to be confused with SNI!)
|
|
|
|
Changes
|
|
* Ability to enable / disable SSL v3 / TLS 1.0 / TLS 1.1 / TLS 1.2
|
|
individually
|
|
* Introduced separate SSL Ciphersuites module that is based on
|
|
Cipher and MD information
|
|
* Internals for SSL module adapted to have separate IV pointer that is
|
|
dynamically set (Better support for hardware acceleration)
|
|
* Moved all OID functionality to a separate module. RSA function
|
|
prototypes for the RSA sign and verify functions changed as a result
|
|
* Split up the GCM module into a starts/update/finish cycle
|
|
* Client and server now filter sent and accepted ciphersuites on minimum
|
|
and maximum protocol version
|
|
* Ability to disable server_name extension (RFC 6066)
|
|
* Renamed error_strerror() to the less conflicting polarssl_strerror()
|
|
(Ability to keep old as well with POLARSSL_ERROR_STRERROR_BC)
|
|
* SHA2 renamed to SHA256, SHA4 renamed to SHA512 and functions accordingly
|
|
* All RSA operations require a random generator for blinding purposes
|
|
* X509 core refactored
|
|
* x509_crt_verify() now case insensitive for cn (RFC 6125 6.4)
|
|
* Also compiles / runs without time-based functions (!POLARSSL_HAVE_TIME)
|
|
* Support faulty X509 v1 certificates with extensions
|
|
(POLARSSL_X509_ALLOW_EXTENSIONS_NON_V3)
|
|
|
|
Bugfix
|
|
* Fixed parse error in ssl_parse_certificate_request()
|
|
* zlib compression/decompression skipped on empty blocks
|
|
* Support for AIX header locations in net.c module
|
|
* Fixed file descriptor leaks
|
|
|
|
Security
|
|
* RSA blinding on CRT operations to counter timing attacks
|
|
(found by Cyril Arnaud and Pierre-Alain Fouque)
|
|
|
|
= Version 1.2.10 released 2013-10-07
|
|
Changes
|
|
* Changed RSA blinding to a slower but thread-safe version
|
|
|
|
Bugfix
|
|
* Fixed memory leak in RSA as a result of introduction of blinding
|
|
* Fixed ssl_pkcs11_decrypt() prototype
|
|
* Fixed MSVC project files
|
|
|
|
= Version 1.2.9 released 2013-10-01
|
|
Changes
|
|
* x509_verify() now case insensitive for cn (RFC 6125 6.4)
|
|
|
|
Bugfix
|
|
* Fixed potential memory leak when failing to resume a session
|
|
* Fixed potential file descriptor leaks (found by Remi Gacogne)
|
|
* Minor fixes
|
|
|
|
Security
|
|
* Fixed potential heap buffer overflow on large hostname setting
|
|
* Fixed potential negative value misinterpretation in load_file()
|
|
* RSA blinding on CRT operations to counter timing attacks
|
|
(found by Cyril Arnaud and Pierre-Alain Fouque)
|
|
|
|
= Version 1.2.8 released 2013-06-19
|
|
Features
|
|
* Parsing of PKCS#8 encrypted private key files
|
|
* PKCS#12 PBE and derivation functions
|
|
* Centralized module option values in config.h to allow user-defined
|
|
settings without editing header files by using POLARSSL_CONFIG_OPTIONS
|
|
|
|
Changes
|
|
* HAVEGE random generator disabled by default
|
|
* Internally split up x509parse_key() into a (PEM) handler function
|
|
and specific DER parser functions for the PKCS#1 and unencrypted
|
|
PKCS#8 private key formats
|
|
* Added mechanism to provide alternative implementations for all
|
|
symmetric cipher and hash algorithms (e.g. POLARSSL_AES_ALT in
|
|
config.h)
|
|
* PKCS#5 module added. Moved PBKDF2 functionality inside and deprecated
|
|
old PBKDF2 module
|
|
|
|
Bugfix
|
|
* Secure renegotiation extension should only be sent in case client
|
|
supports secure renegotiation
|
|
* Fixed offset for cert_type list in ssl_parse_certificate_request()
|
|
* Fixed const correctness issues that have no impact on the ABI
|
|
* x509parse_crt() now better handles PEM error situations
|
|
* ssl_parse_certificate() now calls x509parse_crt_der() directly
|
|
instead of the x509parse_crt() wrapper that can also parse PEM
|
|
certificates
|
|
* x509parse_crtpath() is now reentrant and uses more portable stat()
|
|
* Fixed bignum.c and bn_mul.h to support Thumb2 and LLVM compiler
|
|
* Fixed values for 2-key Triple DES in cipher layer
|
|
* ssl_write_certificate_request() can handle empty ca_chain
|
|
|
|
Security
|
|
* A possible DoS during the SSL Handshake, due to faulty parsing of
|
|
PEM-encoded certificates has been fixed (found by Jack Lloyd)
|
|
|
|
= Version 1.2.7 released 2013-04-13
|
|
Features
|
|
* Ability to specify allowed ciphersuites based on the protocol version.
|
|
|
|
Changes
|
|
* Default Blowfish keysize is now 128-bits
|
|
* Test suites made smaller to accommodate Raspberry Pi
|
|
|
|
Bugfix
|
|
* Fix for MPI assembly for ARM
|
|
* GCM adapted to support sizes > 2^29
|
|
|
|
= Version 1.2.6 released 2013-03-11
|
|
Bugfix
|
|
* Fixed memory leak in ssl_free() and ssl_reset() for active session
|
|
* Corrected GCM counter incrementation to use only 32-bits instead of
|
|
128-bits (found by Yawning Angel)
|
|
* Fixes for 64-bit compilation with MS Visual Studio
|
|
* Fixed net_bind() for specified IP addresses on little endian systems
|
|
* Fixed assembly code for ARM (Thumb and regular) for some compilers
|
|
|
|
Changes
|
|
* Internally split up rsa_pkcs1_encrypt(), rsa_pkcs1_decrypt(),
|
|
rsa_pkcs1_sign() and rsa_pkcs1_verify() to separate PKCS#1 v1.5 and
|
|
PKCS#1 v2.1 functions
|
|
* Added support for custom labels when using rsa_rsaes_oaep_encrypt()
|
|
or rsa_rsaes_oaep_decrypt()
|
|
* Re-added handling for SSLv2 Client Hello when the define
|
|
POLARSSL_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO is set
|
|
* The SSL session cache module (ssl_cache) now also retains peer_cert
|
|
information (not the entire chain)
|
|
|
|
Security
|
|
* Removed further timing differences during SSL message decryption in
|
|
ssl_decrypt_buf()
|
|
* Removed timing differences due to bad padding from
|
|
rsa_rsaes_pkcs1_v15_decrypt() and rsa_pkcs1_decrypt() for PKCS#1 v1.5
|
|
operations
|
|
|
|
= Version 1.2.5 released 2013-02-02
|
|
Changes
|
|
* Allow enabling of dummy error_strerror() to support some use-cases
|
|
* Debug messages about padding errors during SSL message decryption are
|
|
disabled by default and can be enabled with POLARSSL_SSL_DEBUG_ALL
|
|
* Sending of security-relevant alert messages that do not break
|
|
interoperability can be switched on/off with the flag
|
|
POLARSSL_SSL_ALL_ALERT_MESSAGES
|
|
|
|
Security
|
|
* Removed timing differences during SSL message decryption in
|
|
ssl_decrypt_buf() due to badly formatted padding
|
|
|
|
= Version 1.2.4 released 2013-01-25
|
|
Changes
|
|
* More advanced SSL ciphersuite representation and moved to more dynamic
|
|
SSL core
|
|
* Added ssl_handshake_step() to allow single stepping the handshake process
|
|
|
|
Bugfix
|
|
* Memory leak when using RSA_PKCS_V21 operations fixed
|
|
* Handle future version properly in ssl_write_certificate_request()
|
|
* Correctly handle CertificateRequest message in client for <= TLS 1.1
|
|
without DN list
|
|
|
|
= Version 1.2.3 released 2012-11-26
|
|
Bugfix
|
|
* Server not always sending correct CertificateRequest message
|
|
|
|
= Version 1.2.2 released 2012-11-24
|
|
Changes
|
|
* Added p_hw_data to ssl_context for context specific hardware acceleration
|
|
data
|
|
* During verify trust-CA is only checked for expiration and CRL presence
|
|
|
|
Bugfixes
|
|
* Fixed client authentication compatibility
|
|
* Fixed dependency on POLARSSL_SHA4_C in SSL modules
|
|
|
|
= Version 1.2.1 released 2012-11-20
|
|
Changes
|
|
* Depth that the certificate verify callback receives is now numbered
|
|
bottom-up (Peer cert depth is 0)
|
|
|
|
Bugfixes
|
|
* Fixes for MSVC6
|
|
* Moved mpi_inv_mod() outside POLARSSL_GENPRIME
|
|
* Allow R and A to point to same mpi in mpi_div_mpi (found by Manuel
|
|
Pégourié-Gonnard)
|
|
* Fixed possible segfault in mpi_shift_r() (found by Manuel
|
|
Pégourié-Gonnard)
|
|
* Added max length check for rsa_pkcs1_sign with PKCS#1 v2.1
|
|
|
|
= Version 1.2.0 released 2012-10-31
|
|
Features
|
|
* Added support for NULL cipher (POLARSSL_CIPHER_NULL_CIPHER) and weak
|
|
ciphersuites (POLARSSL_ENABLE_WEAK_CIPHERSUITES). They are disabled by
|
|
default!
|
|
* Added support for wildcard certificates
|
|
* Added support for multi-domain certificates through the X509 Subject
|
|
Alternative Name extension
|
|
* Added preliminary ASN.1 buffer writing support
|
|
* Added preliminary X509 Certificate Request writing support
|
|
* Added key_app_writer example application
|
|
* Added cert_req example application
|
|
* Added base Galois Counter Mode (GCM) for AES
|
|
* Added TLS 1.2 support (RFC 5246)
|
|
* Added GCM suites to TLS 1.2 (RFC 5288)
|
|
* Added commandline error code convertor (util/strerror)
|
|
* Added support for Hardware Acceleration hooking in SSL/TLS
|
|
* Added OpenSSL / PolarSSL compatibility script (tests/compat.sh) and
|
|
example application (programs/ssl/o_p_test) (requires OpenSSL)
|
|
* Added X509 CA Path support
|
|
* Added Thumb assembly optimizations
|
|
* Added DEFLATE compression support as per RFC3749 (requires zlib)
|
|
* Added blowfish algorithm (Generic and cipher layer)
|
|
* Added PKCS#5 PBKDF2 key derivation function
|
|
* Added Secure Renegotiation (RFC 5746)
|
|
* Added predefined DHM groups from RFC 5114
|
|
* Added simple SSL session cache implementation
|
|
* Added ServerName extension parsing (SNI) at server side
|
|
* Added option to add minimum accepted SSL/TLS protocol version
|
|
|
|
Changes
|
|
* Removed redundant POLARSSL_DEBUG_MSG define
|
|
* AES code only check for Padlock once
|
|
* Fixed const-correctness mpi_get_bit()
|
|
* Documentation for mpi_lsb() and mpi_msb()
|
|
* Moved out_msg to out_hdr + 32 to support hardware acceleration
|
|
* Changed certificate verify behaviour to comply with RFC 6125 section 6.3
|
|
to not match CN if subjectAltName extension is present (Closes ticket #56)
|
|
* Cipher layer cipher_mode_t POLARSSL_MODE_CFB128 is renamed to
|
|
POLARSSL_MODE_CFB, to also handle different block size CFB modes.
|
|
* Removed handling for SSLv2 Client Hello (as per RFC 5246 recommendation)
|
|
* Revamped session resumption handling
|
|
* Generalized external private key implementation handling (like PKCS#11)
|
|
in SSL/TLS
|
|
* Revamped x509_verify() and the SSL f_vrfy callback implementations
|
|
* Moved from unsigned long to fixed width uint32_t types throughout code
|
|
* Renamed ciphersuites naming scheme to IANA reserved names
|
|
|
|
Bugfix
|
|
* Fixed handling error in mpi_cmp_mpi() on longer B values (found by
|
|
Hui Dong)
|
|
* Fixed potential heap corruption in x509_name allocation
|
|
* Fixed single RSA test that failed on Big Endian systems (Closes ticket #54)
|
|
* mpi_exp_mod() now correctly handles negative base numbers (Closes ticket
|
|
#52)
|
|
* Handle encryption with private key and decryption with public key as per
|
|
RFC 2313
|
|
* Handle empty certificate subject names
|
|
* Prevent reading over buffer boundaries on X509 certificate parsing
|
|
* mpi_add_abs() now correctly handles adding short numbers to long numbers
|
|
with carry rollover (found by Ruslan Yushchenko)
|
|
* Handle existence of OpenSSL Trust Extensions at end of X.509 DER blob
|
|
* Fixed MPI assembly for SPARC64 platform
|
|
|
|
Security
|
|
* Fixed potential memory zeroization on miscrafted RSA key (found by Eloi
|
|
Vanderbeken)
|
|
|
|
= Version 1.1.8 released on 2013-10-01
|
|
Bugfix
|
|
* Fixed potential memory leak when failing to resume a session
|
|
* Fixed potential file descriptor leaks
|
|
|
|
Security
|
|
* Potential buffer-overflow for ssl_read_record() (independently found by
|
|
both TrustInSoft and Paul Brodeur of Leviathan Security Group)
|
|
* Potential negative value misinterpretation in load_file()
|
|
* Potential heap buffer overflow on large hostname setting
|
|
|
|
= Version 1.1.7 released on 2013-06-19
|
|
Changes
|
|
* HAVEGE random generator disabled by default
|
|
|
|
Bugfix
|
|
* x509parse_crt() now better handles PEM error situations
|
|
* ssl_parse_certificate() now calls x509parse_crt_der() directly
|
|
instead of the x509parse_crt() wrapper that can also parse PEM
|
|
certificates
|
|
* Fixed values for 2-key Triple DES in cipher layer
|
|
* ssl_write_certificate_request() can handle empty ca_chain
|
|
|
|
Security
|
|
* A possible DoS during the SSL Handshake, due to faulty parsing of
|
|
PEM-encoded certificates has been fixed (found by Jack Lloyd)
|
|
|
|
= Version 1.1.6 released on 2013-03-11
|
|
Bugfix
|
|
* Fixed net_bind() for specified IP addresses on little endian systems
|
|
|
|
Changes
|
|
* Allow enabling of dummy error_strerror() to support some use-cases
|
|
* Debug messages about padding errors during SSL message decryption are
|
|
disabled by default and can be enabled with POLARSSL_SSL_DEBUG_ALL
|
|
|
|
Security
|
|
* Removed timing differences during SSL message decryption in
|
|
ssl_decrypt_buf()
|
|
* Removed timing differences due to bad padding from
|
|
rsa_rsaes_pkcs1_v15_decrypt() and rsa_pkcs1_decrypt() for PKCS#1 v1.5
|
|
operations
|
|
|
|
= Version 1.1.5 released on 2013-01-16
|
|
Bugfix
|
|
* Fixed MPI assembly for SPARC64 platform
|
|
* Handle existence of OpenSSL Trust Extensions at end of X.509 DER blob
|
|
* mpi_add_abs() now correctly handles adding short numbers to long numbers
|
|
with carry rollover
|
|
* Moved mpi_inv_mod() outside POLARSSL_GENPRIME
|
|
* Prevent reading over buffer boundaries on X509 certificate parsing
|
|
* mpi_exp_mod() now correctly handles negative base numbers (Closes ticket
|
|
#52)
|
|
* Fixed possible segfault in mpi_shift_r() (found by Manuel
|
|
Pégourié-Gonnard)
|
|
* Allow R and A to point to same mpi in mpi_div_mpi (found by Manuel
|
|
Pégourié-Gonnard)
|
|
* Added max length check for rsa_pkcs1_sign with PKCS#1 v2.1
|
|
* Memory leak when using RSA_PKCS_V21 operations fixed
|
|
* Handle encryption with private key and decryption with public key as per
|
|
RFC 2313
|
|
* Fixes for MSVC6
|
|
|
|
Security
|
|
* Fixed potential memory zeroization on miscrafted RSA key (found by Eloi
|
|
Vanderbeken)
|
|
|
|
= Version 1.1.4 released on 2012-05-31
|
|
Bugfix
|
|
* Correctly handle empty SSL/TLS packets (Found by James Yonan)
|
|
* Fixed potential heap corruption in x509_name allocation
|
|
* Fixed single RSA test that failed on Big Endian systems (Closes ticket #54)
|
|
|
|
= Version 1.1.3 released on 2012-04-29
|
|
Bugfix
|
|
* Fixed random MPI generation to not generate more size than requested.
|
|
|
|
= Version 1.1.2 released on 2012-04-26
|
|
Bugfix
|
|
* Fixed handling error in mpi_cmp_mpi() on longer B values (found by
|
|
Hui Dong)
|
|
|
|
Security
|
|
* Fixed potential memory corruption on miscrafted client messages (found by
|
|
Frama-C team at CEA LIST)
|
|
* Fixed generation of DHM parameters to correct length (found by Ruslan
|
|
Yushchenko)
|
|
|
|
= Version 1.1.1 released on 2012-01-23
|
|
Bugfix
|
|
* Check for failed malloc() in ssl_set_hostname() and x509_get_entries()
|
|
(Closes ticket #47, found by Hugo Leisink)
|
|
* Fixed issues with Intel compiler on 64-bit systems (Closes ticket #50)
|
|
* Fixed multiple compiler warnings for VS6 and armcc
|
|
* Fixed bug in CTR_CRBG selftest
|
|
|
|
= Version 1.1.0 released on 2011-12-22
|
|
Features
|
|
* Added ssl_session_reset() to allow better multi-connection pools of
|
|
SSL contexts without needing to set all non-connection-specific
|
|
data and pointers again. Adapted ssl_server to use this functionality.
|
|
* Added ssl_set_max_version() to allow clients to offer a lower maximum
|
|
supported version to a server to help buggy server implementations.
|
|
(Closes ticket #36)
|
|
* Added cipher_get_cipher_mode() and cipher_get_cipher_operation()
|
|
introspection functions (Closes ticket #40)
|
|
* Added CTR_DRBG based on AES-256-CTR (NIST SP 800-90) random generator
|
|
* Added a generic entropy accumulator that provides support for adding
|
|
custom entropy sources and added some generic and platform dependent
|
|
entropy sources
|
|
|
|
Changes
|
|
* Documentation for AES and Camellia in modes CTR and CFB128 clarified.
|
|
* Fixed rsa_encrypt and rsa_decrypt examples to use public key for
|
|
encryption and private key for decryption. (Closes ticket #34)
|
|
* Inceased maximum size of ASN1 length reads to 32-bits.
|
|
* Added an EXPLICIT tag number parameter to x509_get_ext()
|
|
* Added a separate CRL entry extension parsing function
|
|
* Separated the ASN.1 parsing code from the X.509 specific parsing code.
|
|
So now there is a module that is controlled with POLARSSL_ASN1_PARSE_C.
|
|
* Changed the defined key-length of DES ciphers in cipher.h to include the
|
|
parity bits, to prevent mistakes in copying data. (Closes ticket #33)
|
|
* Loads of minimal changes to better support WINCE as a build target
|
|
(Credits go to Marco Lizza)
|
|
* Added POLARSSL_MPI_WINDOW_SIZE definition to allow easier time to memory
|
|
trade-off
|
|
* Introduced POLARSSL_MPI_MAX_SIZE and POLARSSL_MPI_MAX_BITS for MPI size
|
|
management (Closes ticket #44)
|
|
* Changed the used random function pointer to more flexible format. Renamed
|
|
havege_rand() to havege_random() to prevent mistakes. Lots of changes as
|
|
a consequence in library code and programs
|
|
* Moved all examples programs to use the new entropy and CTR_DRBG
|
|
* Added permissive certificate parsing to x509parse_crt() and
|
|
x509parse_crtfile(). With permissive parsing the parsing does not stop on
|
|
encountering a parse-error. Beware that the meaning of return values has
|
|
changed!
|
|
* All error codes are now negative. Even on mermory failures and IO errors.
|
|
|
|
Bugfix
|
|
* Fixed faulty HMAC-MD2 implementation. Found by dibac. (Closes
|
|
ticket #37)
|
|
* Fixed a bug where the CRL parser expected an EXPLICIT ASN.1 tag
|
|
before version numbers
|
|
* Allowed X509 key usage parsing to accept 4 byte values instead of the
|
|
standard 1 byte version sometimes used by Microsoft. (Closes ticket #38)
|
|
* Fixed incorrect behaviour in case of RSASSA-PSS with a salt length
|
|
smaller than the hash length. (Closes ticket #41)
|
|
* If certificate serial is longer than 32 octets, serial number is now
|
|
appended with '....' after first 28 octets
|
|
* Improved build support for s390x and sparc64 in bignum.h
|
|
* Fixed MS Visual C++ name clash with int64 in sha4.h
|
|
* Corrected removal of leading "00:" in printing serial numbers in
|
|
certificates and CRLs
|
|
|
|
= Version 1.0.0 released on 2011-07-27
|
|
Features
|
|
* Expanded cipher layer with support for CFB128 and CTR mode
|
|
* Added rsa_encrypt and rsa_decrypt simple example programs.
|
|
|
|
Changes
|
|
* The generic cipher and message digest layer now have normal error
|
|
codes instead of integers
|
|
|
|
Bugfix
|
|
* Undid faulty bug fix in ssl_write() when flushing old data (Ticket
|
|
#18)
|
|
|
|
= Version 0.99-pre5 released on 2011-05-26
|
|
Features
|
|
* Added additional Cipher Block Modes to symmetric ciphers
|
|
(AES CTR, Camellia CTR, XTEA CBC) including the option to
|
|
enable and disable individual modes when needed
|
|
* Functions requiring File System functions can now be disabled
|
|
by undefining POLARSSL_FS_IO
|
|
* A error_strerror function() has been added to translate between
|
|
error codes and their description.
|
|
* Added mpi_get_bit() and mpi_set_bit() individual bit setter/getter
|
|
functions.
|
|
* Added ssl_mail_client and ssl_fork_server as example programs.
|
|
|
|
Changes
|
|
* Major argument / variable rewrite. Introduced use of size_t
|
|
instead of int for buffer lengths and loop variables for
|
|
better unsigned / signed use. Renamed internal bigint types
|
|
t_int and t_dbl to t_uint and t_udbl in the process
|
|
* mpi_init() and mpi_free() now only accept a single MPI
|
|
argument and do not accept variable argument lists anymore.
|
|
* The error codes have been remapped and combining error codes
|
|
is now done with a PLUS instead of an OR as error codes
|
|
used are negative.
|
|
* Changed behaviour of net_read(), ssl_fetch_input() and ssl_recv().
|
|
net_recv() now returns 0 on EOF instead of
|
|
POLARSSL_ERR_NET_CONN_RESET. ssl_fetch_input() returns
|
|
POLARSSL_ERR_SSL_CONN_EOF on an EOF from its f_recv() function.
|
|
ssl_read() returns 0 if a POLARSSL_ERR_SSL_CONN_EOF is received
|
|
after the handshake.
|
|
* Network functions now return POLARSSL_ERR_NET_WANT_READ or
|
|
POLARSSL_ERR_NET_WANT_WRITE instead of the ambiguous
|
|
POLARSSL_ERR_NET_TRY_AGAIN
|
|
|
|
= Version 0.99-pre4 released on 2011-04-01
|
|
Features
|
|
* Added support for PKCS#1 v2.1 encoding and thus support
|
|
for the RSAES-OAEP and RSASSA-PSS operations.
|
|
* Reading of Public Key files incorporated into default x509
|
|
functionality as well.
|
|
* Added mpi_fill_random() for centralized filling of big numbers
|
|
with random data (Fixed ticket #10)
|
|
|
|
Changes
|
|
* Debug print of MPI now removes leading zero octets and
|
|
displays actual bit size of the value.
|
|
* x509parse_key() (and as a consequence x509parse_keyfile())
|
|
does not zeroize memory in advance anymore. Use rsa_init()
|
|
before parsing a key or keyfile!
|
|
|
|
Bugfix
|
|
* Debug output of MPI's now the same independent of underlying
|
|
platform (32-bit / 64-bit) (Fixes ticket #19, found by Mads
|
|
Kiilerich and Mihai Militaru)
|
|
* Fixed bug in ssl_write() when flushing old data (Fixed ticket
|
|
#18, found by Nikolay Epifanov)
|
|
* Fixed proper handling of RSASSA-PSS verification with variable
|
|
length salt lengths
|
|
|
|
= Version 0.99-pre3 released on 2011-02-28
|
|
This release replaces version 0.99-pre2 which had possible copyright issues.
|
|
Features
|
|
* Parsing PEM private keys encrypted with DES and AES
|
|
are now supported as well (Fixes ticket #5)
|
|
* Added crl_app program to allow easy reading and
|
|
printing of X509 CRLs from file
|
|
|
|
Changes
|
|
* Parsing of PEM files moved to separate module (Fixes
|
|
ticket #13). Also possible to remove PEM support for
|
|
systems only using DER encoding
|
|
|
|
Bugfixes
|
|
* Corrected parsing of UTCTime dates before 1990 and
|
|
after 1950
|
|
* Support more exotic OID's when parsing certificates
|
|
(found by Mads Kiilerich)
|
|
* Support more exotic name representations when parsing
|
|
certificates (found by Mads Kiilerich)
|
|
* Replaced the expired test certificates
|
|
* Do not bail out if no client certificate specified. Try
|
|
to negotiate anonymous connection (Fixes ticket #12,
|
|
found by Boris Krasnovskiy)
|
|
|
|
Security fixes
|
|
* Fixed a possible Man-in-the-Middle attack on the
|
|
Diffie Hellman key exchange (thanks to Larry Highsmith,
|
|
Subreption LLC)
|
|
|
|
= Version 0.99-pre1 released on 2011-01-30
|
|
Features
|
|
Note: Most of these features have been donated by Fox-IT
|
|
* Added Doxygen source code documentation parts
|
|
* Added reading of DHM context from memory and file
|
|
* Improved X509 certificate parsing to include extended
|
|
certificate fields, including Key Usage
|
|
* Improved certificate verification and verification
|
|
against the available CRLs
|
|
* Detection for DES weak keys and parity bits added
|
|
* Improvements to support integration in other
|
|
applications:
|
|
+ Added generic message digest and cipher wrapper
|
|
+ Improved information about current capabilities,
|
|
status, objects and configuration
|
|
+ Added verification callback on certificate chain
|
|
verification to allow external blacklisting
|
|
+ Additional example programs to show usage
|
|
* Added support for PKCS#11 through the use of the
|
|
libpkcs11-helper library
|
|
|
|
Changes
|
|
* x509parse_time_expired() checks time in addition to
|
|
the existing date check
|
|
* The ciphers member of ssl_context and the cipher member
|
|
of ssl_session have been renamed to ciphersuites and
|
|
ciphersuite respectively. This clarifies the difference
|
|
with the generic cipher layer and is better naming
|
|
altogether
|
|
|
|
= Version 0.14.0 released on 2010-08-16
|
|
Features
|
|
* Added support for SSL_EDH_RSA_AES_128_SHA and
|
|
SSL_EDH_RSA_CAMELLIA_128_SHA ciphersuites
|
|
* Added compile-time and run-time version information
|
|
* Expanded ssl_client2 arguments for more flexibility
|
|
* Added support for TLS v1.1
|
|
|
|
Changes
|
|
* Made Makefile cleaner
|
|
* Removed dependency on rand() in rsa_pkcs1_encrypt().
|
|
Now using random fuction provided to function and
|
|
changed the prototype of rsa_pkcs1_encrypt(),
|
|
rsa_init() and rsa_gen_key().
|
|
* Some SSL defines were renamed in order to avoid
|
|
future confusion
|
|
|
|
Bug fixes
|
|
* Fixed CMake out of source build for tests (found by
|
|
kkert)
|
|
* rsa_check_private() now supports PKCS1v2 keys as well
|
|
* Fixed deadlock in rsa_pkcs1_encrypt() on failing random
|
|
generator
|
|
|
|
= Version 0.13.1 released on 2010-03-24
|
|
Bug fixes
|
|
* Fixed Makefile in library that was mistakenly merged
|
|
* Added missing const string fixes
|
|
|
|
= Version 0.13.0 released on 2010-03-21
|
|
Features
|
|
* Added option parsing for host and port selection to
|
|
ssl_client2
|
|
* Added support for GeneralizedTime in X509 parsing
|
|
* Added cert_app program to allow easy reading and
|
|
printing of X509 certificates from file or SSL
|
|
connection.
|
|
|
|
Changes
|
|
* Added const correctness for main code base
|
|
* X509 signature algorithm determination is now
|
|
in a function to allow easy future expansion
|
|
* Changed symmetric cipher functions to
|
|
identical interface (returning int result values)
|
|
* Changed ARC4 to use separate input/output buffer
|
|
* Added reset function for HMAC context as speed-up
|
|
for specific use-cases
|
|
|
|
Bug fixes
|
|
* Fixed bug resulting in failure to send the last
|
|
certificate in the chain in ssl_write_certificate() and
|
|
ssl_write_certificate_request() (found by fatbob)
|
|
* Added small fixes for compiler warnings on a Mac
|
|
(found by Frank de Brabander)
|
|
* Fixed algorithmic bug in mpi_is_prime() (found by
|
|
Smbat Tonoyan)
|
|
|
|
= Version 0.12.1 released on 2009-10-04
|
|
Changes
|
|
* Coverage test definitions now support 'depends_on'
|
|
tagging system.
|
|
* Tests requiring specific hashing algorithms now honor
|
|
the defines.
|
|
|
|
Bug fixes
|
|
* Changed typo in #ifdef in x509parse.c (found
|
|
by Eduardo)
|
|
|
|
= Version 0.12.0 released on 2009-07-28
|
|
Features
|
|
* Added CMake makefiles as alternative to regular Makefiles.
|
|
* Added preliminary Code Coverage tests for AES, ARC4,
|
|
Base64, MPI, SHA-family, MD-family, HMAC-SHA-family,
|
|
Camellia, DES, 3-DES, RSA PKCS#1, XTEA, Diffie-Hellman
|
|
and X509parse.
|
|
|
|
Changes
|
|
* Error codes are not (necessarily) negative. Keep
|
|
this is mind when checking for errors.
|
|
* RSA_RAW renamed to SIG_RSA_RAW for consistency.
|
|
* Fixed typo in name of POLARSSL_ERR_RSA_OUTPUT_TOO_LARGE.
|
|
* Changed interface for AES and Camellia setkey functions
|
|
to indicate invalid key lengths.
|
|
|
|
Bug fixes
|
|
* Fixed include location of endian.h on FreeBSD (found by
|
|
Gabriel)
|
|
* Fixed include location of endian.h and name clash on
|
|
Apples (found by Martin van Hensbergen)
|
|
* Fixed HMAC-MD2 by modifying md2_starts(), so that the
|
|
required HMAC ipad and opad variables are not cleared.
|
|
(found by code coverage tests)
|
|
* Prevented use of long long in bignum if
|
|
POLARSSL_HAVE_LONGLONG not defined (found by Giles
|
|
Bathgate).
|
|
* Fixed incorrect handling of negative strings in
|
|
mpi_read_string() (found by code coverage tests).
|
|
* Fixed segfault on handling empty rsa_context in
|
|
rsa_check_pubkey() and rsa_check_privkey() (found by
|
|
code coverage tests).
|
|
* Fixed incorrect handling of one single negative input
|
|
value in mpi_add_abs() (found by code coverage tests).
|
|
* Fixed incorrect handling of negative first input
|
|
value in mpi_sub_abs() (found by code coverage tests).
|
|
* Fixed incorrect handling of negative first input
|
|
value in mpi_mod_mpi() and mpi_mod_int(). Resulting
|
|
change also affects mpi_write_string() (found by code
|
|
coverage tests).
|
|
* Corrected is_prime() results for 0, 1 and 2 (found by
|
|
code coverage tests).
|
|
* Fixed Camellia and XTEA for 64-bit Windows systems.
|
|
|
|
= Version 0.11.1 released on 2009-05-17
|
|
* Fixed missing functionality for SHA-224, SHA-256, SHA384,
|
|
SHA-512 in rsa_pkcs1_sign()
|
|
|
|
= Version 0.11.0 released on 2009-05-03
|
|
* Fixed a bug in mpi_gcd() so that it also works when both
|
|
input numbers are even and added testcases to check
|
|
(found by Pierre Habouzit).
|
|
* Added support for SHA-224, SHA-256, SHA-384 and SHA-512
|
|
one way hash functions with the PKCS#1 v1.5 signing and
|
|
verification.
|
|
* Fixed minor bug regarding mpi_gcd located within the
|
|
POLARSSL_GENPRIME block.
|
|
* Fixed minor memory leak in x509parse_crt() and added better
|
|
handling of 'full' certificate chains (found by Mathias
|
|
Olsson).
|
|
* Centralized file opening and reading for x509 files into
|
|
load_file()
|
|
* Made definition of net_htons() endian-clean for big endian
|
|
systems (Found by Gernot).
|
|
* Undefining POLARSSL_HAVE_ASM now also handles prevents asm in
|
|
padlock and timing code.
|
|
* Fixed an off-by-one buffer allocation in ssl_set_hostname()
|
|
responsible for crashes and unwanted behaviour.
|
|
* Added support for Certificate Revocation List (CRL) parsing.
|
|
* Added support for CRL revocation to x509parse_verify() and
|
|
SSL/TLS code.
|
|
* Fixed compatibility of XTEA and Camellia on a 64-bit system
|
|
(found by Felix von Leitner).
|
|
|
|
= Version 0.10.0 released on 2009-01-12
|
|
* Migrated XySSL to PolarSSL
|
|
* Added XTEA symmetric cipher
|
|
* Added Camellia symmetric cipher
|
|
* Added support for ciphersuites: SSL_RSA_CAMELLIA_128_SHA,
|
|
SSL_RSA_CAMELLIA_256_SHA and SSL_EDH_RSA_CAMELLIA_256_SHA
|
|
* Fixed dangerous bug that can cause a heap overflow in
|
|
rsa_pkcs1_decrypt (found by Christophe Devine)
|
|
|
|
================================================================
|
|
XySSL ChangeLog
|
|
|
|
= Version 0.9 released on 2008-03-16
|
|
|
|
* Added support for ciphersuite: SSL_RSA_AES_128_SHA
|
|
* Enabled support for large files by default in aescrypt2.c
|
|
* Preliminary openssl wrapper contributed by David Barrett
|
|
* Fixed a bug in ssl_write() that caused the same payload to
|
|
be sent twice in non-blocking mode when send returns EAGAIN
|
|
* Fixed ssl_parse_client_hello(): session id and challenge must
|
|
not be swapped in the SSLv2 ClientHello (found by Greg Robson)
|
|
* Added user-defined callback debug function (Krystian Kolodziej)
|
|
* Before freeing a certificate, properly zero out all cert. data
|
|
* Fixed the "mode" parameter so that encryption/decryption are
|
|
not swapped on PadLock; also fixed compilation on older versions
|
|
of gcc (bug reported by David Barrett)
|
|
* Correctly handle the case in padlock_xcryptcbc() when input or
|
|
ouput data is non-aligned by falling back to the software
|
|
implementation, as VIA Nehemiah cannot handle non-aligned buffers
|
|
* Fixed a memory leak in x509parse_crt() which was reported by Greg
|
|
Robson-Garth; some x509write.c fixes by Pascal Vizeli, thanks to
|
|
Matthew Page who reported several bugs
|
|
* Fixed x509_get_ext() to accept some rare certificates which have
|
|
an INTEGER instead of a BOOLEAN for BasicConstraints::cA.
|
|
* Added support on the client side for the TLS "hostname" extension
|
|
(patch contributed by David Patino)
|
|
* Make x509parse_verify() return BADCERT_CN_MISMATCH when an empty
|
|
string is passed as the CN (bug reported by spoofy)
|
|
* Added an option to enable/disable the BN assembly code
|
|
* Updated rsa_check_privkey() to verify that (D*E) = 1 % (P-1)*(Q-1)
|
|
* Disabled obsolete hash functions by default (MD2, MD4); updated
|
|
selftest and benchmark to not test ciphers that have been disabled
|
|
* Updated x509parse_cert_info() to correctly display byte 0 of the
|
|
serial number, setup correct server port in the ssl client example
|
|
* Fixed a critical denial-of-service with X.509 cert. verification:
|
|
peer may cause xyssl to loop indefinitely by sending a certificate
|
|
for which the RSA signature check fails (bug reported by Benoit)
|
|
* Added test vectors for: AES-CBC, AES-CFB, DES-CBC and 3DES-CBC,
|
|
HMAC-MD5, HMAC-SHA1, HMAC-SHA-256, HMAC-SHA-384, and HMAC-SHA-512
|
|
* Fixed HMAC-SHA-384 and HMAC-SHA-512 (thanks to Josh Sinykin)
|
|
* Modified ssl_parse_client_key_exchange() to protect against
|
|
Daniel Bleichenbacher attack on PKCS#1 v1.5 padding, as well
|
|
as the Klima-Pokorny-Rosa extension of Bleichenbacher's attack
|
|
* Updated rsa_gen_key() so that ctx->N is always nbits in size
|
|
* Fixed assembly PPC compilation errors on Mac OS X, thanks to
|
|
David Barrett and Dusan Semen
|
|
|
|
= Version 0.8 released on 2007-10-20
|
|
|
|
* Modified the HMAC functions to handle keys larger
|
|
than 64 bytes, thanks to Stephane Desneux and gary ng
|
|
* Fixed ssl_read_record() to properly update the handshake
|
|
message digests, which fixes IE6/IE7 client authentication
|
|
* Cleaned up the XYSSL* #defines, suggested by Azriel Fasten
|
|
* Fixed net_recv(), thanks to Lorenz Schori and Egon Kocjan
|
|
* Added user-defined callbacks for handling I/O and sessions
|
|
* Added lots of debugging output in the SSL/TLS functions
|
|
* Added preliminary X.509 cert. writing by Pascal Vizeli
|
|
* Added preliminary support for the VIA PadLock routines
|
|
* Added AES-CFB mode of operation, contributed by chmike
|
|
* Added an SSL/TLS stress testing program (ssl_test.c)
|
|
* Updated the RSA PKCS#1 code to allow choosing between
|
|
RSA_PUBLIC and RSA_PRIVATE, as suggested by David Barrett
|
|
* Updated ssl_read() to skip 0-length records from OpenSSL
|
|
* Fixed the make install target to comply with *BSD make
|
|
* Fixed a bug in mpi_read_binary() on 64-bit platforms
|
|
* mpi_is_prime() speedups, thanks to Kevin McLaughlin
|
|
* Fixed a long standing memory leak in mpi_is_prime()
|
|
* Replaced realloc with malloc in mpi_grow(), and set
|
|
the sign of zero as positive in mpi_init() (reported
|
|
by Jonathan M. McCune)
|
|
|
|
= Version 0.7 released on 2007-07-07
|
|
|
|
* Added support for the MicroBlaze soft-core processor
|
|
* Fixed a bug in ssl_tls.c which sometimes prevented SSL
|
|
connections from being established with non-blocking I/O
|
|
* Fixed a couple bugs in the VS6 and UNIX Makefiles
|
|
* Fixed the "PIC register ebx clobbered in asm" bug
|
|
* Added HMAC starts/update/finish support functions
|
|
* Added the SHA-224, SHA-384 and SHA-512 hash functions
|
|
* Fixed the net_set_*block routines, thanks to Andreas
|
|
* Added a few demonstration programs: md5sum, sha1sum,
|
|
dh_client, dh_server, rsa_genkey, rsa_sign, rsa_verify
|
|
* Added new bignum import and export helper functions
|
|
* Rewrote README.txt in program/ssl/ca to better explain
|
|
how to create a test PKI
|
|
|
|
= Version 0.6 released on 2007-04-01
|
|
|
|
* Ciphers used in SSL/TLS can now be disabled at compile
|
|
time, to reduce the memory footprint on embedded systems
|
|
* Added multiply assembly code for the TriCore and modified
|
|
havege_struct for this processor, thanks to David Patiño
|
|
* Added multiply assembly code for 64-bit PowerPCs,
|
|
thanks to Peking University and the OSU Open Source Lab
|
|
* Added experimental support of Quantum Cryptography
|
|
* Added support for autoconf, contributed by Arnaud Cornet
|
|
* Fixed "long long" compilation issues on IA-64 and PPC64
|
|
* Fixed a bug introduced in xyssl-0.5/timing.c: hardclock
|
|
was not being correctly defined on ARM and MIPS
|
|
|
|
= Version 0.5 released on 2007-03-01
|
|
|
|
* Added multiply assembly code for SPARC and Alpha
|
|
* Added (beta) support for non-blocking I/O operations
|
|
* Implemented session resuming and client authentication
|
|
* Fixed some portability issues on WinCE, MINIX 3, Plan9
|
|
(thanks to Benjamin Newman), HP-UX, FreeBSD and Solaris
|
|
* Improved the performance of the EDH key exchange
|
|
* Fixed a bug that caused valid packets with a payload
|
|
size of 16384 bytes to be rejected
|
|
|
|
= Version 0.4 released on 2007-02-01
|
|
|
|
* Added support for Ephemeral Diffie-Hellman key exchange
|
|
* Added multiply asm code for SSE2, ARM, PPC, MIPS and M68K
|
|
* Various improvement to the modular exponentiation code
|
|
* Rewrote the headers to generate the API docs with doxygen
|
|
* Fixed a bug in ssl_encrypt_buf (incorrect padding was
|
|
generated) and in ssl_parse_client_hello (max. client
|
|
version was not properly set), thanks to Didier Rebeix
|
|
* Fixed another bug in ssl_parse_client_hello: clients with
|
|
cipherlists larger than 96 bytes were incorrectly rejected
|
|
* Fixed a couple memory leak in x509_read.c
|
|
|
|
= Version 0.3 released on 2007-01-01
|
|
|
|
* Added server-side SSLv3 and TLSv1.0 support
|
|
* Multiple fixes to enhance the compatibility with g++,
|
|
thanks to Xosé Antón Otero Ferreira
|
|
* Fixed a bug in the CBC code, thanks to dowst; also,
|
|
the bignum code is no longer dependent on long long
|
|
* Updated rsa_pkcs1_sign to handle arbitrary large inputs
|
|
* Updated timing.c for improved compatibility with i386
|
|
and 486 processors, thanks to Arnaud Cornet
|
|
|
|
= Version 0.2 released on 2006-12-01
|
|
|
|
* Updated timing.c to support ARM and MIPS arch
|
|
* Updated the MPI code to support 8086 on MSVC 1.5
|
|
* Added the copyright notice at the top of havege.h
|
|
* Fixed a bug in sha2_hmac, thanks to newsoft/Wenfang Zhang
|
|
* Fixed a bug reported by Adrian Rüegsegger in x509_read_key
|
|
* Fixed a bug reported by Torsten Lauter in ssl_read_record
|
|
* Fixed a bug in rsa_check_privkey that would wrongly cause
|
|
valid RSA keys to be dismissed (thanks to oldwolf)
|
|
* Fixed a bug in mpi_is_prime that caused some primes to fail
|
|
the Miller-Rabin primality test
|
|
|
|
I'd also like to thank Younès Hafri for the CRUX linux port,
|
|
Khalil Petit who added XySSL into pkgsrc and Arnaud Cornet
|
|
who maintains the Debian package :-)
|
|
|
|
= Version 0.1 released on 2006-11-01
|
|
|