673a226698
OpenSSL provides APIs to generate only the signted data format PKCS7 i.e. without content type OID. This patch adds support to parse the data correctly even if formatted only as signed data Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
1274 lines
71 KiB
Makefile
1274 lines
71 KiB
Makefile
## This file contains a record of how some of the test data was
|
|
## generated. The final build products are committed to the repository
|
|
## as well to make sure that the test data is identical. You do not
|
|
## need to use this makefile unless you're extending mbed TLS's tests.
|
|
|
|
## Many data files were generated prior to the existence of this
|
|
## makefile, so the method of their generation was not recorded.
|
|
|
|
## Note that in addition to depending on the version of the data
|
|
## generation tool, many of the build outputs are randomized, so
|
|
## running this makefile twice would not produce the same results.
|
|
|
|
## Tools
|
|
OPENSSL ?= openssl
|
|
FAKETIME ?= faketime
|
|
|
|
TOP_DIR = ../..
|
|
MBEDTLS_CERT_WRITE ?= $(TOP_DIR)/programs/x509/cert_write
|
|
MBEDTLS_CERT_REQ ?= $(TOP_DIR)/programs/x509/cert_req
|
|
|
|
|
|
## Build the generated test data. Note that since the final outputs
|
|
## are committed to the repository, this target should do nothing on a
|
|
## fresh checkout. Furthermore, since the generation is randomized,
|
|
## re-running the same targets may result in differing files. The goal
|
|
## of this makefile is primarily to serve as a record of how the
|
|
## targets were generated in the first place.
|
|
default: all_final
|
|
|
|
all_intermediate := # temporary files
|
|
all_final := # files used by tests
|
|
|
|
|
|
|
|
################################################################
|
|
#### Generate certificates from existing keys
|
|
################################################################
|
|
|
|
test_ca_crt = test-ca.crt
|
|
test_ca_key_file_rsa = test-ca.key
|
|
test_ca_pwd_rsa = PolarSSLTest
|
|
test_ca_config_file = test-ca.opensslconf
|
|
|
|
test-ca.req.sha256: $(test_ca_key_file_rsa)
|
|
$(MBEDTLS_CERT_REQ) output_file=$@ filename=$(test_ca_key_file_rsa) password=$(test_ca_pwd_rsa) subject_name="C=NL,O=PolarSSL,CN=PolarSSL Test CA" md=SHA256
|
|
all_intermediate += test-ca.req.sha256
|
|
|
|
test-ca.crt: $(test_ca_key_file_rsa) test-ca.req.sha256
|
|
$(MBEDTLS_CERT_WRITE) is_ca=1 serial=3 request_file=test-ca.req.sha256 selfsign=1 issuer_name="C=NL,O=PolarSSL,CN=PolarSSL Test CA" issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144400 not_after=20290210144400 md=SHA1 version=3 output_file=$@
|
|
all_final += test-ca.crt
|
|
|
|
test-ca.crt.der: test-ca.crt
|
|
$(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@
|
|
all_final += test-ca.crt.der
|
|
|
|
test-ca.key.der: $(test_ca_key_file_rsa)
|
|
$(OPENSSL) pkey -in $< -out $@ -inform PEM -outform DER -passin "pass:$(test_ca_pwd_rsa)"
|
|
all_final += test-ca.key.der
|
|
|
|
test-ca-sha1.crt: $(test_ca_key_file_rsa) test-ca.req.sha256
|
|
$(MBEDTLS_CERT_WRITE) is_ca=1 serial=3 request_file=test-ca.req.sha256 selfsign=1 issuer_name="C=NL,O=PolarSSL,CN=PolarSSL Test CA" issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144400 not_after=20290210144400 md=SHA1 version=3 output_file=$@
|
|
all_final += test-ca-sha1.crt
|
|
|
|
test-ca-sha1.crt.der: test-ca-sha1.crt
|
|
$(OPENSSL) x509 -in $< -out $@ -inform PEM -outform DER
|
|
all_final += test-ca-sha1.crt.der
|
|
|
|
test-ca-sha256.crt: $(test_ca_key_file_rsa) test-ca.req.sha256
|
|
$(MBEDTLS_CERT_WRITE) is_ca=1 serial=3 request_file=test-ca.req.sha256 selfsign=1 issuer_name="C=NL,O=PolarSSL,CN=PolarSSL Test CA" issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144400 not_after=20290210144400 md=SHA256 version=3 output_file=$@
|
|
all_final += test-ca-sha256.crt
|
|
|
|
test-ca-sha256.crt.der: test-ca-sha256.crt
|
|
$(OPENSSL) x509 -in $< -out $@ -inform PEM -outform DER
|
|
all_final += test-ca-sha256.crt.der
|
|
|
|
test-ca_utf8.crt: $(test_ca_key_file_rsa)
|
|
$(OPENSSL) req -x509 -new -nodes -key $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 3 -config $(test_ca_config_file) -sha1 -days 3653 -utf8 -subj "/C=NL/O=PolarSSL/CN=PolarSSL Test CA" -out $@
|
|
all_final += test-ca_utf8.crt
|
|
|
|
test-ca_printable.crt: $(test_ca_key_file_rsa)
|
|
$(OPENSSL) req -x509 -new -nodes -key $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 3 -config $(test_ca_config_file) -sha1 -days 3653 -subj "/C=NL/O=PolarSSL/CN=PolarSSL Test CA" -out $@
|
|
all_final += test-ca_printable.crt
|
|
|
|
test-ca_uppercase.crt: $(test_ca_key_file_rsa)
|
|
$(OPENSSL) req -x509 -new -nodes -key $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 3 -config $(test_ca_config_file) -sha1 -days 3653 -subj "/C=NL/O=PolarSSL/CN=PolarSSL Test CA" -out $@
|
|
all_final += test-ca_uppercase.crt
|
|
|
|
test_ca_key_file_rsa_alt = test-ca-alt.key
|
|
|
|
cert_example_multi.csr: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) req -new -subj "/C=NL/O=PolarSSL/CN=www.example.com" -set_serial 17 -config $(test_ca_config_file) -extensions dns_alt_names -days 3650 -key rsa_pkcs1_1024_clear.pem -out $@
|
|
|
|
cert_example_multi.crt: cert_example_multi.csr
|
|
$(OPENSSL) x509 -req -CA $(test_ca_crt) -CAkey $(test_ca_key_file_rsa) -extfile $(test_ca_config_file) -extensions dns_alt_names -passin "pass:$(test_ca_pwd_rsa)" -set_serial 17 -days 3653 -sha256 -in $< > $@
|
|
|
|
$(test_ca_key_file_rsa_alt):test-ca.opensslconf
|
|
$(OPENSSL) genrsa -out $@ 2048
|
|
test-ca-alt.csr: $(test_ca_key_file_rsa_alt) $(test_ca_config_file)
|
|
$(OPENSSL) req -new -config $(test_ca_config_file) -key $(test_ca_key_file_rsa_alt) -subj "/C=NL/O=PolarSSL/CN=PolarSSL Test CA" -out $@
|
|
all_intermediate += test-ca-alt.csr
|
|
test-ca-alt.crt: $(test_ca_key_file_rsa_alt) $(test_ca_config_file) test-ca-alt.csr
|
|
$(OPENSSL) req -x509 -config $(test_ca_config_file) -key $(test_ca_key_file_rsa_alt) -set_serial 0 -days 3653 -sha256 -in test-ca-alt.csr -out $@
|
|
all_final += test-ca-alt.crt
|
|
test-ca-alt-good.crt: test-ca-alt.crt test-ca-sha256.crt
|
|
cat test-ca-alt.crt test-ca-sha256.crt > $@
|
|
all_final += test-ca-alt-good.crt
|
|
test-ca-good-alt.crt: test-ca-alt.crt test-ca-sha256.crt
|
|
cat test-ca-sha256.crt test-ca-alt.crt > $@
|
|
all_final += test-ca-good-alt.crt
|
|
|
|
test_ca_crt_file_ec = test-ca2.crt
|
|
test_ca_key_file_ec = test-ca2.key
|
|
|
|
test-ca2.req.sha256: $(test_ca_key_file_ec)
|
|
$(MBEDTLS_CERT_REQ) output_file=$@ filename=$(test_ca_key_file_ec) subject_name="C=NL,O=PolarSSL,CN=Polarssl Test EC CA" md=SHA256
|
|
all_intermediate += test-ca2.req.sha256
|
|
|
|
test-ca2.crt: $(test_ca_key_file_ec) test-ca2.req.sha256
|
|
$(MBEDTLS_CERT_WRITE) is_ca=1 serial=13926223505202072808 request_file=test-ca2.req.sha256 selfsign=1 issuer_name="C=NL,O=PolarSSL,CN=Polarssl Test EC CA" issuer_key=$(test_ca_key_file_ec) not_before=20190210144400 not_after=20290210144400 md=SHA256 version=3 output_file=$@
|
|
all_final += test-ca.crt
|
|
|
|
test-ca-any_policy.crt: $(test_ca_key_file_rsa) test-ca.req.sha256
|
|
$(OPENSSL) req -x509 -config $(test_ca_config_file) -extensions v3_any_policy_ca -key $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 0 -days 3653 -sha256 -in test-ca.req.sha256 -out $@
|
|
all_final += test-ca-any_policy.crt
|
|
|
|
test-ca-any_policy_ec.crt: $(test_ca_key_file_ec) test-ca.req_ec.sha256
|
|
$(OPENSSL) req -x509 -config $(test_ca_config_file) -extensions v3_any_policy_ca -key $(test_ca_key_file_ec) -set_serial 0 -days 3653 -sha256 -in test-ca.req_ec.sha256 -out $@
|
|
all_final += test-ca-any_policy_ec.crt
|
|
|
|
test-ca-any_policy_with_qualifier.crt: $(test_ca_key_file_rsa) test-ca.req.sha256
|
|
$(OPENSSL) req -x509 -config $(test_ca_config_file) -extensions v3_any_policy_qualifier_ca -key $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 0 -days 3653 -sha256 -in test-ca.req.sha256 -out $@
|
|
all_final += test-ca-any_policy_with_qualifier.crt
|
|
|
|
test-ca-any_policy_with_qualifier_ec.crt: $(test_ca_key_file_ec) test-ca.req_ec.sha256
|
|
$(OPENSSL) req -x509 -config $(test_ca_config_file) -extensions v3_any_policy_qualifier_ca -key $(test_ca_key_file_ec) -set_serial 0 -days 3653 -sha256 -in test-ca.req_ec.sha256 -out $@
|
|
all_final += test-ca-any_policy_with_qualifier_ec.crt
|
|
|
|
test-ca-multi_policy.crt: $(test_ca_key_file_rsa) test-ca.req.sha256
|
|
$(OPENSSL) req -x509 -config $(test_ca_config_file) -extensions v3_multi_policy_ca -key $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 0 -days 3653 -sha256 -in test-ca.req.sha256 -out $@
|
|
all_final += test-ca-multi_policy.crt
|
|
|
|
test-ca-multi_policy_ec.crt: $(test_ca_key_file_ec) test-ca.req_ec.sha256
|
|
$(OPENSSL) req -x509 -config $(test_ca_config_file) -extensions v3_multi_policy_ca -key $(test_ca_key_file_ec) -set_serial 0 -days 3653 -sha256 -in test-ca.req_ec.sha256 -out $@
|
|
all_final += test-ca-multi_policy_ec.crt
|
|
|
|
test-ca-unsupported_policy.crt: $(test_ca_key_file_rsa) test-ca.req.sha256
|
|
$(OPENSSL) req -x509 -config $(test_ca_config_file) -extensions v3_unsupported_policy_ca -key $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 0 -days 3653 -sha256 -in test-ca.req.sha256 -out $@
|
|
all_final += test-ca-unsupported_policy.crt
|
|
|
|
test-ca-unsupported_policy_ec.crt: $(test_ca_key_file_ec) test-ca.req_ec.sha256
|
|
$(OPENSSL) req -x509 -config $(test_ca_config_file) -extensions v3_unsupported_policy_ca -key $(test_ca_key_file_ec) -set_serial 0 -days 3653 -sha256 -in test-ca.req_ec.sha256 -out $@
|
|
all_final += test-ca-unsupported_policy_ec.crt
|
|
|
|
test-ca.req_ec.sha256: $(test_ca_key_file_ec)
|
|
$(MBEDTLS_CERT_REQ) output_file=$@ filename=$(test_ca_key_file_ec) subject_name="C=NL, O=PolarSSL, CN=Polarssl Test EC CA" md=SHA256
|
|
all_intermediate += test-ca.req_ec.sha256
|
|
|
|
test-ca2.crt.der: $(test_ca_crt_file_ec)
|
|
$(OPENSSL) x509 -in $(test_ca_crt_file_ec) -out $@ -inform PEM -outform DER
|
|
all_final += test-ca2.crt.der
|
|
|
|
test-ca2.key.der: $(test_ca_key_file_ec)
|
|
$(OPENSSL) pkey -in $(test_ca_key_file_ec) -out $@ -inform PEM -outform DER
|
|
all_final += test-ca2.key.der
|
|
|
|
test_ca_crt_cat12 = test-ca_cat12.crt
|
|
$(test_ca_crt_cat12): $(test_ca_crt) $(test_ca_crt_file_ec)
|
|
cat $(test_ca_crt) $(test_ca_crt_file_ec) > $@
|
|
all_final += $(test_ca_crt_cat12)
|
|
|
|
test_ca_crt_cat21 = test-ca_cat21.crt
|
|
$(test_ca_crt_cat21): $(test_ca_crt) $(test_ca_crt_file_ec)
|
|
cat $(test_ca_crt_file_ec) $(test_ca_crt) > $@
|
|
all_final += $(test_ca_crt_cat21)
|
|
|
|
test-int-ca.csr: test-int-ca.key $(test_ca_config_file)
|
|
$(OPENSSL) req -new -config $(test_ca_config_file) -key test-int-ca.key -subj "/C=NL/O=PolarSSL/CN=PolarSSL Test Intermediate CA" -out $@
|
|
all_intermediate += test-int-ca.csr
|
|
test-int-ca-exp.crt: $(test_ca_crt_file_ec) $(test_ca_key_file_ec) $(test_ca_config_file) test-int-ca.csr
|
|
$(FAKETIME) -f -3653d $(OPENSSL) x509 -req -extfile $(test_ca_config_file) -extensions v3_ca -CA $(test_ca_crt_file_ec) -CAkey $(test_ca_key_file_ec) -set_serial 14 -days 3653 -sha256 -in test-int-ca.csr -out $@
|
|
all_final += test-int-ca-exp.crt
|
|
|
|
enco-cert-utf8str.pem: rsa_pkcs1_1024_clear.pem
|
|
$(MBEDTLS_CERT_WRITE) subject_key=rsa_pkcs1_1024_clear.pem subject_name="CN=dw.yonan.net" issuer_crt=enco-ca-prstr.pem issuer_key=rsa_pkcs1_1024_clear.pem not_before=20190210144406 not_after=20290210144406 md=SHA1 version=3 output_file=$@
|
|
|
|
crl-idp.pem: $(test_ca_crt) $(test_ca_key_file_rsa) $(test_ca_config_file)
|
|
$(OPENSSL) ca -gencrl -batch -cert $(test_ca_crt) -keyfile $(test_ca_key_file_rsa) -key $(test_ca_pwd_rsa) -config $(test_ca_config_file) -name test_ca -md sha256 -crldays 3653 -crlexts crl_ext_idp -out $@
|
|
all_final += crl-idp.pem
|
|
crl-idpnc.pem: $(test_ca_crt) $(test_ca_key_file_rsa) $(test_ca_config_file)
|
|
$(OPENSSL) ca -gencrl -batch -cert $(test_ca_crt) -keyfile $(test_ca_key_file_rsa) -key $(test_ca_pwd_rsa) -config $(test_ca_config_file) -name test_ca -md sha256 -crldays 3653 -crlexts crl_ext_idp_nc -out $@
|
|
all_final += crl-idpnc.pem
|
|
|
|
cli_crt_key_file_rsa = cli-rsa.key
|
|
cli_crt_extensions_file = cli.opensslconf
|
|
|
|
cli-rsa.csr: $(cli_crt_key_file_rsa)
|
|
$(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Client 2" md=SHA1
|
|
all_intermediate += cli-rsa.csr
|
|
|
|
cli-rsa-sha1.crt: cli-rsa.csr
|
|
$(MBEDTLS_CERT_WRITE) request_file=$< serial=4 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA1 version=3 output_file=$@
|
|
|
|
cli-rsa-sha256.crt: cli-rsa.csr
|
|
$(MBEDTLS_CERT_WRITE) request_file=$< serial=4 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA256 version=3 output_file=$@
|
|
all_final += cli-rsa-sha256.crt
|
|
|
|
cli-rsa-sha256.crt.der: cli-rsa-sha256.crt
|
|
$(OPENSSL) x509 -in $< -out $@ -inform PEM -outform DER
|
|
all_final += cli-rsa-sha256.crt.der
|
|
|
|
cli-rsa-sha256-badalg.crt.der: cli-rsa-sha256.crt.der
|
|
hexdump -ve '1/1 "%.2X"' $< | sed "s/06092A864886F70D01010B0500/06092A864886F70D01010B0900/2" | xxd -r -p > $@
|
|
all_final += cli-rsa-sha256-badalg.crt.der
|
|
|
|
cli-rsa.key.der: $(cli_crt_key_file_rsa)
|
|
$(OPENSSL) pkey -in $< -out $@ -inform PEM -outform DER
|
|
all_final += cli-rsa.key.der
|
|
|
|
test_ca_int_rsa1 = test-int-ca.crt
|
|
|
|
server7.csr: server7.key
|
|
$(OPENSSL) req -new -key server7.key -subj "/C=NL/O=PolarSSL/CN=localhost" -out $@
|
|
all_intermediate += server7.csr
|
|
server7-expired.crt: server7.csr $(test_ca_int_rsa1)
|
|
$(FAKETIME) -f -3653d $(OPENSSL) x509 -req -extfile $(cli_crt_extensions_file) -extensions cli-rsa -CA $(test_ca_int_rsa1) -CAkey test-int-ca.key -set_serial 16 -days 3653 -sha256 -in server7.csr | cat - $(test_ca_int_rsa1) > $@
|
|
all_final += server7-expired.crt
|
|
server7-future.crt: server7.csr $(test_ca_int_rsa1)
|
|
$(FAKETIME) -f +3653d $(OPENSSL) x509 -req -extfile $(cli_crt_extensions_file) -extensions cli-rsa -CA $(test_ca_int_rsa1) -CAkey test-int-ca.key -set_serial 16 -days 3653 -sha256 -in server7.csr | cat - $(test_ca_int_rsa1) > $@
|
|
all_final += server7-future.crt
|
|
server7-badsign.crt: server7.crt $(test_ca_int_rsa1)
|
|
{ head -n-2 $<; tail -n-2 $< | sed -e '1s/0\(=*\)$$/_\1/' -e '1s/[^_=]\(=*\)$$/0\1/' -e '1s/_/1/'; cat $(test_ca_int_rsa1); } > $@
|
|
all_final += server7-badsign.crt
|
|
server7_int-ca-exp.crt: server7.crt test-int-ca-exp.crt
|
|
cat server7.crt test-int-ca-exp.crt > $@
|
|
all_final += server7_int-ca-exp.crt
|
|
|
|
cli2.req.sha256: cli2.key
|
|
$(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Test Client 2" md=SHA256
|
|
|
|
all_final += server1.req.sha1
|
|
cli2.crt: cli2.req.sha256
|
|
$(MBEDTLS_CERT_WRITE) request_file=cli2.req.sha256 serial=13 selfsign=0 issuer_name="C=NL,O=PolarSSL,CN=PolarSSL Test EC CA" issuer_key=$(test_ca_key_file_ec) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144400 not_after=20290210144400 md=SHA256 version=3 output_file=$@
|
|
all_final += cli2.crt
|
|
|
|
cli2.crt.der: cli2.crt
|
|
$(OPENSSL) x509 -in $< -out $@ -inform PEM -outform DER
|
|
all_final += cli2.crt.der
|
|
|
|
cli2.key.der: cli2.key
|
|
$(OPENSSL) pkey -in $< -out $@ -inform PEM -outform DER
|
|
all_final += cli2.key.der
|
|
|
|
server5_pwd_ec = PolarSSLTest
|
|
|
|
server5.crt.der: server5.crt
|
|
$(OPENSSL) x509 -in $< -out $@ -inform PEM -outform DER
|
|
all_final += server5.crt.der
|
|
|
|
server5.key.der: server5.key
|
|
$(OPENSSL) pkey -in $< -out $@ -inform PEM -outform DER
|
|
all_final += server5.key.der
|
|
|
|
server5.key.enc: server5.key
|
|
$(OPENSSL) ec -aes256 -in $< -out $@ -passout "pass:$(server5_pwd_ec)"
|
|
all_final += server5.key.enc
|
|
|
|
server5-ss-expired.crt: server5.key
|
|
$(FAKETIME) -f -3653d $(OPENSSL) req -x509 -new -subj "/C=UK/O=mbed TLS/OU=testsuite/CN=localhost" -days 3653 -sha256 -key $< -out $@
|
|
all_final += server5-ss-expired.crt
|
|
|
|
# try to forge a copy of test-int-ca3 with different key
|
|
server5-ss-forgeca.crt: server5.key
|
|
$(FAKETIME) '2015-09-01 14:08:43' $(OPENSSL) req -x509 -new -subj "/C=UK/O=mbed TLS/CN=mbed TLS Test intermediate CA 3" -set_serial 77 -config $(test_ca_config_file) -extensions noext_ca -days 3650 -sha256 -key $< -out $@
|
|
all_final += server5-ss-forgeca.crt
|
|
|
|
server5-othername.crt: server5.key
|
|
$(OPENSSL) req -x509 -new -subj "/C=UK/O=Mbed TLS/CN=Mbed TLS othername SAN" -set_serial 77 -config $(test_ca_config_file) -extensions othername_san -days 3650 -sha256 -key $< -out $@
|
|
|
|
server5-unsupported_othername.crt: server5.key
|
|
$(OPENSSL) req -x509 -new -subj "/C=UK/O=Mbed TLS/CN=Mbed TLS unsupported othername SAN" -set_serial 77 -config $(test_ca_config_file) -extensions unsupoported_othername_san -days 3650 -sha256 -key $< -out $@
|
|
|
|
server5-fan.crt: server5.key
|
|
$(OPENSSL) req -x509 -new -subj "/C=UK/O=Mbed TLS/CN=Mbed TLS FAN" -set_serial 77 -config $(test_ca_config_file) -extensions fan_cert -days 3650 -sha256 -key server5.key -out $@
|
|
|
|
server5-tricky-ip-san.crt: server5.key
|
|
$(OPENSSL) req -x509 -new -subj "/C=UK/O=Mbed TLS/CN=Mbed TLS Tricky IP SAN" -set_serial 77 -config $(test_ca_config_file) -extensions tricky_ip_san -days 3650 -sha256 -key server5.key -out $@
|
|
all_final += server5-tricky-ip-san.crt
|
|
|
|
server10-badsign.crt: server10.crt
|
|
{ head -n-2 $<; tail -n-2 $< | sed -e '1s/0\(=*\)$$/_\1/' -e '1s/[^_=]\(=*\)$$/0\1/' -e '1s/_/1/'; } > $@
|
|
all_final += server10-badsign.crt
|
|
server10-bs_int3.pem: server10-badsign.crt test-int-ca3.crt
|
|
cat server10-badsign.crt test-int-ca3.crt > $@
|
|
all_final += server10-bs_int3.pem
|
|
test-int-ca3-badsign.crt: test-int-ca3.crt
|
|
{ head -n-2 $<; tail -n-2 $< | sed -e '1s/0\(=*\)$$/_\1/' -e '1s/[^_=]\(=*\)$$/0\1/' -e '1s/_/1/'; } > $@
|
|
all_final += test-int-ca3-badsign.crt
|
|
server10_int3-bs.pem: server10.crt test-int-ca3-badsign.crt
|
|
cat server10.crt test-int-ca3-badsign.crt > $@
|
|
all_final += server10_int3-bs.pem
|
|
|
|
rsa_pkcs1_2048_public.pem: server8.key
|
|
$(OPENSSL) rsa -in $< -outform PEM -RSAPublicKey_out -out $@
|
|
all_final += rsa_pkcs1_2048_public.pem
|
|
|
|
rsa_pkcs1_2048_public.der: rsa_pkcs1_2048_public.pem
|
|
$(OPENSSL) rsa -RSAPublicKey_in -in $< -outform DER -RSAPublicKey_out -out $@
|
|
all_final += rsa_pkcs1_2048_public.der
|
|
|
|
rsa_pkcs8_2048_public.pem: server8.key
|
|
$(OPENSSL) rsa -in $< -outform PEM -pubout -out $@
|
|
all_final += rsa_pkcs8_2048_public.pem
|
|
|
|
rsa_pkcs8_2048_public.der: rsa_pkcs8_2048_public.pem
|
|
$(OPENSSL) rsa -pubin -in $< -outform DER -pubout -out $@
|
|
all_final += rsa_pkcs8_2048_public.der
|
|
|
|
################################################################
|
|
#### Generate various RSA keys
|
|
################################################################
|
|
|
|
### Password used for PKCS1-encoded encrypted RSA keys
|
|
keys_rsa_basic_pwd = testkey
|
|
|
|
### Password used for PKCS8-encoded encrypted RSA keys
|
|
keys_rsa_pkcs8_pwd = PolarSSLTest
|
|
|
|
### Basic 1024-, 2048- and 4096-bit unencrypted RSA keys from which
|
|
### all other encrypted RSA keys are derived.
|
|
rsa_pkcs1_1024_clear.pem:
|
|
$(OPENSSL) genrsa -out $@ 1024
|
|
all_final += rsa_pkcs1_1024_clear.pem
|
|
rsa_pkcs1_2048_clear.pem:
|
|
$(OPENSSL) genrsa -out $@ 2048
|
|
all_final += rsa_pkcs1_2048_clear.pem
|
|
rsa_pkcs1_4096_clear.pem:
|
|
$(OPENSSL) genrsa -out $@ 4096
|
|
all_final += rsa_pkcs1_4096_clear.pem
|
|
|
|
###
|
|
### PKCS1-encoded, encrypted RSA keys
|
|
###
|
|
|
|
### 1024-bit
|
|
rsa_pkcs1_1024_des.pem: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) rsa -des -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)"
|
|
all_final += rsa_pkcs1_1024_des.pem
|
|
rsa_pkcs1_1024_3des.pem: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) rsa -des3 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)"
|
|
all_final += rsa_pkcs1_1024_3des.pem
|
|
rsa_pkcs1_1024_aes128.pem: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) rsa -aes128 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)"
|
|
all_final += rsa_pkcs1_1024_aes128.pem
|
|
rsa_pkcs1_1024_aes192.pem: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) rsa -aes192 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)"
|
|
all_final += rsa_pkcs1_1024_aes192.pem
|
|
rsa_pkcs1_1024_aes256.pem: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) rsa -aes256 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)"
|
|
all_final += rsa_pkcs1_1024_aes256.pem
|
|
keys_rsa_enc_basic_1024: rsa_pkcs1_1024_des.pem rsa_pkcs1_1024_3des.pem rsa_pkcs1_1024_aes128.pem rsa_pkcs1_1024_aes192.pem rsa_pkcs1_1024_aes256.pem
|
|
|
|
# 2048-bit
|
|
rsa_pkcs1_2048_des.pem: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) rsa -des -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)"
|
|
all_final += rsa_pkcs1_2048_des.pem
|
|
rsa_pkcs1_2048_3des.pem: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) rsa -des3 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)"
|
|
all_final += rsa_pkcs1_2048_3des.pem
|
|
rsa_pkcs1_2048_aes128.pem: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) rsa -aes128 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)"
|
|
all_final += rsa_pkcs1_2048_aes128.pem
|
|
rsa_pkcs1_2048_aes192.pem: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) rsa -aes192 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)"
|
|
all_final += rsa_pkcs1_2048_aes192.pem
|
|
rsa_pkcs1_2048_aes256.pem: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) rsa -aes256 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)"
|
|
all_final += rsa_pkcs1_2048_aes256.pem
|
|
keys_rsa_enc_basic_2048: rsa_pkcs1_2048_des.pem rsa_pkcs1_2048_3des.pem rsa_pkcs1_2048_aes128.pem rsa_pkcs1_2048_aes192.pem rsa_pkcs1_2048_aes256.pem
|
|
|
|
# 4096-bit
|
|
rsa_pkcs1_4096_des.pem: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) rsa -des -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)"
|
|
all_final += rsa_pkcs1_4096_des.pem
|
|
rsa_pkcs1_4096_3des.pem: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) rsa -des3 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)"
|
|
all_final += rsa_pkcs1_4096_3des.pem
|
|
rsa_pkcs1_4096_aes128.pem: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) rsa -aes128 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)"
|
|
all_final += rsa_pkcs1_4096_aes128.pem
|
|
rsa_pkcs1_4096_aes192.pem: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) rsa -aes192 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)"
|
|
all_final += rsa_pkcs1_4096_aes192.pem
|
|
rsa_pkcs1_4096_aes256.pem: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) rsa -aes256 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)"
|
|
all_final += rsa_pkcs1_4096_aes256.pem
|
|
keys_rsa_enc_basic_4096: rsa_pkcs1_4096_des.pem rsa_pkcs1_4096_3des.pem rsa_pkcs1_4096_aes128.pem rsa_pkcs1_4096_aes192.pem rsa_pkcs1_4096_aes256.pem
|
|
|
|
###
|
|
### PKCS8-v1 encoded, encrypted RSA keys
|
|
###
|
|
|
|
### 1024-bit
|
|
rsa_pkcs8_pbe_sha1_1024_3des.der: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) pkcs8 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-3DES
|
|
all_final += rsa_pkcs8_pbe_sha1_1024_3des.der
|
|
rsa_pkcs8_pbe_sha1_1024_3des.pem: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) pkcs8 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-3DES
|
|
all_final += rsa_pkcs8_pbe_sha1_1024_3des.pem
|
|
keys_rsa_enc_pkcs8_v1_1024_3des: rsa_pkcs8_pbe_sha1_1024_3des.pem rsa_pkcs8_pbe_sha1_1024_3des.der
|
|
|
|
rsa_pkcs8_pbe_sha1_1024_2des.der: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) pkcs8 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-2DES
|
|
all_final += rsa_pkcs8_pbe_sha1_1024_2des.der
|
|
rsa_pkcs8_pbe_sha1_1024_2des.pem: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) pkcs8 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-2DES
|
|
all_final += rsa_pkcs8_pbe_sha1_1024_2des.pem
|
|
keys_rsa_enc_pkcs8_v1_1024_2des: rsa_pkcs8_pbe_sha1_1024_2des.pem rsa_pkcs8_pbe_sha1_1024_2des.der
|
|
|
|
keys_rsa_enc_pkcs8_v1_1024: keys_rsa_enc_pkcs8_v1_1024_3des keys_rsa_enc_pkcs8_v1_1024_2des
|
|
|
|
### 2048-bit
|
|
rsa_pkcs8_pbe_sha1_2048_3des.der: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) pkcs8 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-3DES
|
|
all_final += rsa_pkcs8_pbe_sha1_2048_3des.der
|
|
rsa_pkcs8_pbe_sha1_2048_3des.pem: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) pkcs8 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-3DES
|
|
all_final += rsa_pkcs8_pbe_sha1_2048_3des.pem
|
|
keys_rsa_enc_pkcs8_v1_2048_3des: rsa_pkcs8_pbe_sha1_2048_3des.pem rsa_pkcs8_pbe_sha1_2048_3des.der
|
|
|
|
rsa_pkcs8_pbe_sha1_2048_2des.der: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) pkcs8 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-2DES
|
|
all_final += rsa_pkcs8_pbe_sha1_2048_2des.der
|
|
rsa_pkcs8_pbe_sha1_2048_2des.pem: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) pkcs8 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-2DES
|
|
all_final += rsa_pkcs8_pbe_sha1_2048_2des.pem
|
|
keys_rsa_enc_pkcs8_v1_2048_2des: rsa_pkcs8_pbe_sha1_2048_2des.pem rsa_pkcs8_pbe_sha1_2048_2des.der
|
|
|
|
keys_rsa_enc_pkcs8_v1_2048: keys_rsa_enc_pkcs8_v1_2048_3des keys_rsa_enc_pkcs8_v1_2048_2des
|
|
|
|
### 4096-bit
|
|
rsa_pkcs8_pbe_sha1_4096_3des.der: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) pkcs8 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-3DES
|
|
all_final += rsa_pkcs8_pbe_sha1_4096_3des.der
|
|
rsa_pkcs8_pbe_sha1_4096_3des.pem: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) pkcs8 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-3DES
|
|
all_final += rsa_pkcs8_pbe_sha1_4096_3des.pem
|
|
keys_rsa_enc_pkcs8_v1_4096_3des: rsa_pkcs8_pbe_sha1_4096_3des.pem rsa_pkcs8_pbe_sha1_4096_3des.der
|
|
|
|
rsa_pkcs8_pbe_sha1_4096_2des.der: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) pkcs8 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-2DES
|
|
all_final += rsa_pkcs8_pbe_sha1_4096_2des.der
|
|
rsa_pkcs8_pbe_sha1_4096_2des.pem: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) pkcs8 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-2DES
|
|
all_final += rsa_pkcs8_pbe_sha1_4096_2des.pem
|
|
keys_rsa_enc_pkcs8_v1_4096_2des: rsa_pkcs8_pbe_sha1_4096_2des.pem rsa_pkcs8_pbe_sha1_4096_2des.der
|
|
|
|
keys_rsa_enc_pkcs8_v1_4096: keys_rsa_enc_pkcs8_v1_4096_3des keys_rsa_enc_pkcs8_v1_4096_2des
|
|
|
|
###
|
|
### PKCS8-v2 encoded, encrypted RSA keys, no PRF specified (default for OpenSSL1.0: hmacWithSHA1)
|
|
###
|
|
|
|
### 1024-bit
|
|
rsa_pkcs8_pbes2_pbkdf2_1024_3des.der: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des.der
|
|
rsa_pkcs8_pbes2_pbkdf2_1024_3des.pem: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des.pem
|
|
keys_rsa_enc_pkcs8_v2_1024_3des: rsa_pkcs8_pbes2_pbkdf2_1024_3des.der rsa_pkcs8_pbes2_pbkdf2_1024_3des.pem
|
|
|
|
rsa_pkcs8_pbes2_pbkdf2_1024_des.der: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des.der
|
|
rsa_pkcs8_pbes2_pbkdf2_1024_des.pem: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des.pem
|
|
keys_rsa_enc_pkcs8_v2_1024_des: rsa_pkcs8_pbes2_pbkdf2_1024_des.der rsa_pkcs8_pbes2_pbkdf2_1024_des.pem
|
|
|
|
keys_rsa_enc_pkcs8_v2_1024: keys_rsa_enc_pkcs8_v2_1024_3des keys_rsa_enc_pkcs8_v2_1024_des
|
|
|
|
### 2048-bit
|
|
rsa_pkcs8_pbes2_pbkdf2_2048_3des.der: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des.der
|
|
rsa_pkcs8_pbes2_pbkdf2_2048_3des.pem: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des.pem
|
|
keys_rsa_enc_pkcs8_v2_2048_3des: rsa_pkcs8_pbes2_pbkdf2_2048_3des.der rsa_pkcs8_pbes2_pbkdf2_2048_3des.pem
|
|
|
|
rsa_pkcs8_pbes2_pbkdf2_2048_des.der: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des.der
|
|
rsa_pkcs8_pbes2_pbkdf2_2048_des.pem: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des.pem
|
|
keys_rsa_enc_pkcs8_v2_2048_des: rsa_pkcs8_pbes2_pbkdf2_2048_des.der rsa_pkcs8_pbes2_pbkdf2_2048_des.pem
|
|
|
|
keys_rsa_enc_pkcs8_v2_2048: keys_rsa_enc_pkcs8_v2_2048_3des keys_rsa_enc_pkcs8_v2_2048_des
|
|
|
|
### 4096-bit
|
|
rsa_pkcs8_pbes2_pbkdf2_4096_3des.der: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des.der
|
|
rsa_pkcs8_pbes2_pbkdf2_4096_3des.pem: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des.pem
|
|
keys_rsa_enc_pkcs8_v2_4096_3des: rsa_pkcs8_pbes2_pbkdf2_4096_3des.der rsa_pkcs8_pbes2_pbkdf2_4096_3des.pem
|
|
|
|
rsa_pkcs8_pbes2_pbkdf2_4096_des.der: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des.der
|
|
rsa_pkcs8_pbes2_pbkdf2_4096_des.pem: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des.pem
|
|
keys_rsa_enc_pkcs8_v2_4096_des: rsa_pkcs8_pbes2_pbkdf2_4096_des.der rsa_pkcs8_pbes2_pbkdf2_4096_des.pem
|
|
|
|
keys_rsa_enc_pkcs8_v2_4096: keys_rsa_enc_pkcs8_v2_4096_3des keys_rsa_enc_pkcs8_v2_4096_des
|
|
|
|
###
|
|
### PKCS8-v2 encoded, encrypted RSA keys, PRF hmacWithSHA224
|
|
###
|
|
|
|
### 1024-bit
|
|
rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha224.der: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA224 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha224.der
|
|
rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha224.pem: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA224 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha224.pem
|
|
keys_rsa_enc_pkcs8_v2_1024_3des_sha224: rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha224.der rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha224.pem
|
|
|
|
rsa_pkcs8_pbes2_pbkdf2_1024_des_sha224.der: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA224 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des_sha224.der
|
|
rsa_pkcs8_pbes2_pbkdf2_1024_des_sha224.pem: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA224 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des_sha224.pem
|
|
keys_rsa_enc_pkcs8_v2_1024_des_sha224: rsa_pkcs8_pbes2_pbkdf2_1024_des_sha224.der rsa_pkcs8_pbes2_pbkdf2_1024_des_sha224.pem
|
|
|
|
keys_rsa_enc_pkcs8_v2_1024_sha224: keys_rsa_enc_pkcs8_v2_1024_3des_sha224 keys_rsa_enc_pkcs8_v2_1024_des_sha224
|
|
|
|
### 2048-bit
|
|
rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha224.der: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA224 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha224.der
|
|
rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha224.pem: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA224 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha224.pem
|
|
keys_rsa_enc_pkcs8_v2_2048_3des_sha224: rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha224.der rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha224.pem
|
|
|
|
rsa_pkcs8_pbes2_pbkdf2_2048_des_sha224.der: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA224 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des_sha224.der
|
|
rsa_pkcs8_pbes2_pbkdf2_2048_des_sha224.pem: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA224 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des_sha224.pem
|
|
keys_rsa_enc_pkcs8_v2_2048_des_sha224: rsa_pkcs8_pbes2_pbkdf2_2048_des_sha224.der rsa_pkcs8_pbes2_pbkdf2_2048_des_sha224.pem
|
|
|
|
keys_rsa_enc_pkcs8_v2_2048_sha224: keys_rsa_enc_pkcs8_v2_2048_3des_sha224 keys_rsa_enc_pkcs8_v2_2048_des_sha224
|
|
|
|
### 4096-bit
|
|
rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.der: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA224 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.der
|
|
rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.pem: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA224 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.pem
|
|
keys_rsa_enc_pkcs8_v2_4096_3des_sha224: rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.der rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.pem
|
|
|
|
rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.der: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA224 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.der
|
|
rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.pem: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA224 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.pem
|
|
keys_rsa_enc_pkcs8_v2_4096_des_sha224: rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.der rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.pem
|
|
|
|
keys_rsa_enc_pkcs8_v2_4096_sha224: keys_rsa_enc_pkcs8_v2_4096_3des_sha224 keys_rsa_enc_pkcs8_v2_4096_des_sha224
|
|
|
|
###
|
|
### PKCS8-v2 encoded, encrypted RSA keys, PRF hmacWithSHA256
|
|
###
|
|
|
|
### 1024-bit
|
|
rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha256.der: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA256 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha256.der
|
|
rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha256.pem: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA256 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha256.pem
|
|
keys_rsa_enc_pkcs8_v2_1024_3des_sha256: rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha256.der rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha256.pem
|
|
|
|
rsa_pkcs8_pbes2_pbkdf2_1024_des_sha256.der: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA256 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des_sha256.der
|
|
rsa_pkcs8_pbes2_pbkdf2_1024_des_sha256.pem: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA256 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des_sha256.pem
|
|
keys_rsa_enc_pkcs8_v2_1024_des_sha256: rsa_pkcs8_pbes2_pbkdf2_1024_des_sha256.der rsa_pkcs8_pbes2_pbkdf2_1024_des_sha256.pem
|
|
|
|
keys_rsa_enc_pkcs8_v2_1024_sha256: keys_rsa_enc_pkcs8_v2_1024_3des_sha256 keys_rsa_enc_pkcs8_v2_1024_des_sha256
|
|
|
|
### 2048-bit
|
|
rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha256.der: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA256 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha256.der
|
|
rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha256.pem: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA256 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha256.pem
|
|
keys_rsa_enc_pkcs8_v2_2048_3des_sha256: rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha256.der rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha256.pem
|
|
|
|
rsa_pkcs8_pbes2_pbkdf2_2048_des_sha256.der: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA256 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des_sha256.der
|
|
rsa_pkcs8_pbes2_pbkdf2_2048_des_sha256.pem: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA256 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des_sha256.pem
|
|
keys_rsa_enc_pkcs8_v2_2048_des_sha256: rsa_pkcs8_pbes2_pbkdf2_2048_des_sha256.der rsa_pkcs8_pbes2_pbkdf2_2048_des_sha256.pem
|
|
|
|
keys_rsa_enc_pkcs8_v2_2048_sha256: keys_rsa_enc_pkcs8_v2_2048_3des_sha256 keys_rsa_enc_pkcs8_v2_2048_des_sha256
|
|
|
|
### 4096-bit
|
|
rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.der: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA256 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.der
|
|
rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.pem: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA256 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.pem
|
|
keys_rsa_enc_pkcs8_v2_4096_3des_sha256: rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.der rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.pem
|
|
|
|
rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.der: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA256 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.der
|
|
rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.pem: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA256 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.pem
|
|
keys_rsa_enc_pkcs8_v2_4096_des_sha256: rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.der rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.pem
|
|
|
|
keys_rsa_enc_pkcs8_v2_4096_sha256: keys_rsa_enc_pkcs8_v2_4096_3des_sha256 keys_rsa_enc_pkcs8_v2_4096_des_sha256
|
|
|
|
###
|
|
### PKCS8-v2 encoded, encrypted RSA keys, PRF hmacWithSHA384
|
|
###
|
|
|
|
### 1024-bit
|
|
rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha384.der: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA384 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha384.der
|
|
rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha384.pem: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA384 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha384.pem
|
|
keys_rsa_enc_pkcs8_v2_1024_3des_sha384: rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha384.der rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha384.pem
|
|
|
|
rsa_pkcs8_pbes2_pbkdf2_1024_des_sha384.der: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA384 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des_sha384.der
|
|
rsa_pkcs8_pbes2_pbkdf2_1024_des_sha384.pem: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA384 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des_sha384.pem
|
|
keys_rsa_enc_pkcs8_v2_1024_des_sha384: rsa_pkcs8_pbes2_pbkdf2_1024_des_sha384.der rsa_pkcs8_pbes2_pbkdf2_1024_des_sha384.pem
|
|
|
|
keys_rsa_enc_pkcs8_v2_1024_sha384: keys_rsa_enc_pkcs8_v2_1024_3des_sha384 keys_rsa_enc_pkcs8_v2_1024_des_sha384
|
|
|
|
### 2048-bit
|
|
rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha384.der: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA384 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha384.der
|
|
rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha384.pem: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA384 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha384.pem
|
|
keys_rsa_enc_pkcs8_v2_2048_3des_sha384: rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha384.der rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha384.pem
|
|
|
|
rsa_pkcs8_pbes2_pbkdf2_2048_des_sha384.der: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA384 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des_sha384.der
|
|
rsa_pkcs8_pbes2_pbkdf2_2048_des_sha384.pem: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA384 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des_sha384.pem
|
|
keys_rsa_enc_pkcs8_v2_2048_des_sha384: rsa_pkcs8_pbes2_pbkdf2_2048_des_sha384.der rsa_pkcs8_pbes2_pbkdf2_2048_des_sha384.pem
|
|
|
|
keys_rsa_enc_pkcs8_v2_2048_sha384: keys_rsa_enc_pkcs8_v2_2048_3des_sha384 keys_rsa_enc_pkcs8_v2_2048_des_sha384
|
|
|
|
### 4096-bit
|
|
rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.der: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA384 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.der
|
|
rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.pem: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA384 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.pem
|
|
keys_rsa_enc_pkcs8_v2_4096_3des_sha384: rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.der rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.pem
|
|
|
|
rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.der: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA384 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.der
|
|
rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.pem: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA384 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.pem
|
|
keys_rsa_enc_pkcs8_v2_4096_des_sha384: rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.der rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.pem
|
|
|
|
keys_rsa_enc_pkcs8_v2_4096_sha384: keys_rsa_enc_pkcs8_v2_4096_3des_sha384 keys_rsa_enc_pkcs8_v2_4096_des_sha384
|
|
|
|
###
|
|
### PKCS8-v2 encoded, encrypted RSA keys, PRF hmacWithSHA512
|
|
###
|
|
|
|
### 1024-bit
|
|
rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha512.der: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA512 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha512.der
|
|
rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha512.pem: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA512 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha512.pem
|
|
keys_rsa_enc_pkcs8_v2_1024_3des_sha512: rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha512.der rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha512.pem
|
|
|
|
rsa_pkcs8_pbes2_pbkdf2_1024_des_sha512.der: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA512 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des_sha512.der
|
|
rsa_pkcs8_pbes2_pbkdf2_1024_des_sha512.pem: rsa_pkcs1_1024_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA512 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des_sha512.pem
|
|
keys_rsa_enc_pkcs8_v2_1024_des_sha512: rsa_pkcs8_pbes2_pbkdf2_1024_des_sha512.der rsa_pkcs8_pbes2_pbkdf2_1024_des_sha512.pem
|
|
|
|
keys_rsa_enc_pkcs8_v2_1024_sha512: keys_rsa_enc_pkcs8_v2_1024_3des_sha512 keys_rsa_enc_pkcs8_v2_1024_des_sha512
|
|
|
|
### 2048-bit
|
|
rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha512.der: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA512 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha512.der
|
|
rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha512.pem: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA512 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha512.pem
|
|
keys_rsa_enc_pkcs8_v2_2048_3des_sha512: rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha512.der rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha512.pem
|
|
|
|
rsa_pkcs8_pbes2_pbkdf2_2048_des_sha512.der: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA512 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des_sha512.der
|
|
rsa_pkcs8_pbes2_pbkdf2_2048_des_sha512.pem: rsa_pkcs1_2048_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA512 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des_sha512.pem
|
|
keys_rsa_enc_pkcs8_v2_2048_des_sha512: rsa_pkcs8_pbes2_pbkdf2_2048_des_sha512.der rsa_pkcs8_pbes2_pbkdf2_2048_des_sha512.pem
|
|
|
|
keys_rsa_enc_pkcs8_v2_2048_sha512: keys_rsa_enc_pkcs8_v2_2048_3des_sha512 keys_rsa_enc_pkcs8_v2_2048_des_sha512
|
|
|
|
### 4096-bit
|
|
rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.der: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA512 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.der
|
|
rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.pem: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA512 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.pem
|
|
keys_rsa_enc_pkcs8_v2_4096_3des_sha512: rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.der rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.pem
|
|
|
|
rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.der: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA512 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.der
|
|
rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.pem: rsa_pkcs1_4096_clear.pem
|
|
$(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA512 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)"
|
|
all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.pem
|
|
keys_rsa_enc_pkcs8_v2_4096_des_sha512: rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.der rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.pem
|
|
|
|
keys_rsa_enc_pkcs8_v2_4096_sha512: keys_rsa_enc_pkcs8_v2_4096_3des_sha512 keys_rsa_enc_pkcs8_v2_4096_des_sha512
|
|
|
|
###
|
|
### Rules to generate all RSA keys from a particular class
|
|
###
|
|
|
|
### Generate basic unencrypted RSA keys
|
|
keys_rsa_unenc: rsa_pkcs1_1024_clear.pem rsa_pkcs1_2048_clear.pem rsa_pkcs1_4096_clear.pem
|
|
|
|
### Generate PKCS1-encoded encrypted RSA keys
|
|
keys_rsa_enc_basic: keys_rsa_enc_basic_1024 keys_rsa_enc_basic_2048 keys_rsa_enc_basic_4096
|
|
|
|
### Generate PKCS8-v1 encrypted RSA keys
|
|
keys_rsa_enc_pkcs8_v1: keys_rsa_enc_pkcs8_v1_1024 keys_rsa_enc_pkcs8_v1_2048 keys_rsa_enc_pkcs8_v1_4096
|
|
|
|
### Generate PKCS8-v2 encrypted RSA keys
|
|
keys_rsa_enc_pkcs8_v2: keys_rsa_enc_pkcs8_v2_1024 keys_rsa_enc_pkcs8_v2_2048 keys_rsa_enc_pkcs8_v2_4096 keys_rsa_enc_pkcs8_v2_1024_sha224 keys_rsa_enc_pkcs8_v2_2048_sha224 keys_rsa_enc_pkcs8_v2_4096_sha224 keys_rsa_enc_pkcs8_v2_1024_sha256 keys_rsa_enc_pkcs8_v2_2048_sha256 keys_rsa_enc_pkcs8_v2_4096_sha256 keys_rsa_enc_pkcs8_v2_1024_sha384 keys_rsa_enc_pkcs8_v2_2048_sha384 keys_rsa_enc_pkcs8_v2_4096_sha384 keys_rsa_enc_pkcs8_v2_1024_sha512 keys_rsa_enc_pkcs8_v2_2048_sha512 keys_rsa_enc_pkcs8_v2_4096_sha512
|
|
|
|
### Generate all RSA keys
|
|
keys_rsa_all: keys_rsa_unenc keys_rsa_enc_basic keys_rsa_enc_pkcs8_v1 keys_rsa_enc_pkcs8_v2
|
|
|
|
################################################################
|
|
#### Generate various EC keys
|
|
################################################################
|
|
|
|
###
|
|
### PKCS8 encoded
|
|
###
|
|
|
|
ec_prv.pk8.der:
|
|
$(OPENSSL) genpkey -algorithm EC -pkeyopt ec_paramgen_curve:prime192v1 -pkeyopt ec_param_enc:named_curve -out $@ -outform DER
|
|
all_final += ec_prv.pk8.der
|
|
|
|
# ### Instructions for creating `ec_prv.pk8nopub.der`,
|
|
# ### `ec_prv.pk8nopubparam.der`, and `ec_prv.pk8param.der` by hand from
|
|
# ### `ec_prv.pk8.der`.
|
|
#
|
|
# These instructions assume you are familiar with ASN.1 DER encoding and can
|
|
# use a hex editor to manipulate DER.
|
|
#
|
|
# The relevant ASN.1 definitions for a PKCS#8 encoded Elliptic Curve key are:
|
|
#
|
|
# PrivateKeyInfo ::= SEQUENCE {
|
|
# version Version,
|
|
# privateKeyAlgorithm PrivateKeyAlgorithmIdentifier,
|
|
# privateKey PrivateKey,
|
|
# attributes [0] IMPLICIT Attributes OPTIONAL
|
|
# }
|
|
#
|
|
# AlgorithmIdentifier ::= SEQUENCE {
|
|
# algorithm OBJECT IDENTIFIER,
|
|
# parameters ANY DEFINED BY algorithm OPTIONAL
|
|
# }
|
|
#
|
|
# ECParameters ::= CHOICE {
|
|
# namedCurve OBJECT IDENTIFIER
|
|
# -- implicitCurve NULL
|
|
# -- specifiedCurve SpecifiedECDomain
|
|
# }
|
|
#
|
|
# ECPrivateKey ::= SEQUENCE {
|
|
# version INTEGER { ecPrivkeyVer1(1) } (ecPrivkeyVer1),
|
|
# privateKey OCTET STRING,
|
|
# parameters [0] ECParameters {{ NamedCurve }} OPTIONAL,
|
|
# publicKey [1] BIT STRING OPTIONAL
|
|
# }
|
|
#
|
|
# `ec_prv.pk8.der` as generatde above by OpenSSL should have the following
|
|
# fields:
|
|
#
|
|
# * privateKeyAlgorithm namedCurve
|
|
# * privateKey.parameters NOT PRESENT
|
|
# * privateKey.publicKey PRESENT
|
|
# * attributes NOT PRESENT
|
|
#
|
|
# # ec_prv.pk8nopub.der
|
|
#
|
|
# Take `ec_prv.pk8.der` and remove `privateKey.publicKey`.
|
|
#
|
|
# # ec_prv.pk8nopubparam.der
|
|
#
|
|
# Take `ec_prv.pk8nopub.der` and add `privateKey.parameters`, the same value as
|
|
# `privateKeyAlgorithm.namedCurve`. Don't forget to add the explicit tag.
|
|
#
|
|
# # ec_prv.pk8param.der
|
|
#
|
|
# Take `ec_prv.pk8.der` and add `privateKey.parameters`, the same value as
|
|
# `privateKeyAlgorithm.namedCurve`. Don't forget to add the explicit tag.
|
|
|
|
ec_prv.pk8.pem: ec_prv.pk8.der
|
|
$(OPENSSL) pkey -in $< -inform DER -out $@
|
|
all_final += ec_prv.pk8.pem
|
|
ec_prv.pk8nopub.pem: ec_prv.pk8nopub.der
|
|
$(OPENSSL) pkey -in $< -inform DER -out $@
|
|
all_final += ec_prv.pk8nopub.pem
|
|
ec_prv.pk8nopubparam.pem: ec_prv.pk8nopubparam.der
|
|
$(OPENSSL) pkey -in $< -inform DER -out $@
|
|
all_final += ec_prv.pk8nopubparam.pem
|
|
ec_prv.pk8param.pem: ec_prv.pk8param.der
|
|
$(OPENSSL) pkey -in $< -inform DER -out $@
|
|
all_final += ec_prv.pk8param.pem
|
|
|
|
################################################################
|
|
### Generate CSRs for X.509 write test suite
|
|
################################################################
|
|
|
|
server1.req.sha1: server1.key
|
|
$(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA1
|
|
all_final += server1.req.sha1
|
|
|
|
server1.req.md5: server1.key
|
|
$(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=MD5
|
|
all_final += server1.req.md5
|
|
|
|
server1.req.sha224: server1.key
|
|
$(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA224
|
|
all_final += server1.req.sha224
|
|
|
|
server1.req.sha256: server1.key
|
|
$(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA256
|
|
all_final += server1.req.sha256
|
|
|
|
server1.req.sha384: server1.key
|
|
$(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA384
|
|
all_final += server1.req.sha384
|
|
|
|
server1.req.sha512: server1.key
|
|
$(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA512
|
|
all_final += server1.req.sha512
|
|
|
|
server1.req.cert_type: server1.key
|
|
$(MBEDTLS_CERT_REQ) output_file=$@ filename=$< ns_cert_type=ssl_server subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA1
|
|
all_final += server1.req.cert_type
|
|
|
|
server1.req.key_usage: server1.key
|
|
$(MBEDTLS_CERT_REQ) output_file=$@ filename=$< key_usage=digital_signature,non_repudiation,key_encipherment subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA1
|
|
all_final += server1.req.key_usage
|
|
|
|
server1.req.ku-ct: server1.key
|
|
$(MBEDTLS_CERT_REQ) output_file=$@ filename=$< key_usage=digital_signature,non_repudiation,key_encipherment ns_cert_type=ssl_server subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA1
|
|
all_final += server1.req.ku-ct
|
|
|
|
server1.req.key_usage_empty: server1.key
|
|
$(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA1 force_key_usage=1
|
|
all_final += server1.req.key_usage_empty
|
|
|
|
server1.req.cert_type_empty: server1.key
|
|
$(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA1 force_ns_cert_type=1
|
|
all_final += server1.req.cert_type_empty
|
|
|
|
server1.req.commas.sha256: server1.key
|
|
$(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL\, Commas,CN=PolarSSL Server 1" md=SHA256
|
|
all_final += server1.req.commas.sha256
|
|
|
|
# server2*
|
|
|
|
server2_pwd_ec = PolarSSLTest
|
|
|
|
server2.req.sha256: server2.key
|
|
$(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=localhost" md=SHA256
|
|
all_intermediate += server2.req.sha256
|
|
|
|
server2.crt.der: server2.crt
|
|
$(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@
|
|
all_final += server2.crt.der
|
|
|
|
server2-sha256.crt.der: server2-sha256.crt
|
|
$(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@
|
|
all_final += server2-sha256.crt.der
|
|
|
|
server2.key.der: server2.key
|
|
$(OPENSSL) pkey -in $< -out $@ -inform PEM -outform DER
|
|
all_final += server2.key.der
|
|
|
|
server2.key.enc: server2.key
|
|
$(OPENSSL) rsa -aes256 -in $< -out $@ -passout "pass:$(server2_pwd_ec)"
|
|
all_final += server2.key.enc
|
|
|
|
# server5*
|
|
|
|
# The use of 'Server 1' in the DN is intentional here, as the DN is hardcoded in the x509_write test suite.'
|
|
server5.req.ku.sha1: server5.key
|
|
$(MBEDTLS_CERT_REQ) output_file=$@ filename=$< key_usage=digital_signature,non_repudiation subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA1
|
|
all_final += server5.req.ku.sha1
|
|
|
|
################################################################
|
|
### Generate certificates for CRT write check tests
|
|
################################################################
|
|
|
|
### The test files use the Mbed TLS generated certificates server1*.crt,
|
|
### but for comparison with OpenSSL also rules for OpenSSL-generated
|
|
### certificates server1*.crt.openssl are offered.
|
|
###
|
|
### Known differences:
|
|
### * OpenSSL encodes trailing zero-bits in bit-strings occurring in X.509 extension
|
|
### as unused bits, while Mbed TLS doesn't.
|
|
|
|
test_ca_server1_db = test-ca.server1.db
|
|
test_ca_server1_serial = test-ca.server1.serial
|
|
test_ca_server1_config_file = test-ca.server1.opensslconf
|
|
|
|
# server1*
|
|
|
|
server1.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa)
|
|
$(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 version=3 output_file=$@
|
|
server1.noauthid.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa)
|
|
$(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA1 authority_identifier=0 version=3 output_file=$@
|
|
server1.crt.der: server1.crt
|
|
$(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA1 authority_identifier=0 version=3 output_file=$@
|
|
server1.der: server1.crt
|
|
$(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@
|
|
server1.commas.crt: server1.key server1.req.commas.sha256 $(test_ca_crt) $(test_ca_key_file_rsa)
|
|
$(MBEDTLS_CERT_WRITE) request_file=server1.req.commas.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 version=3 output_file=$@
|
|
all_final += server1.crt server1.noauthid.crt server1.crt.der server1.commas.crt
|
|
|
|
server1.key_usage.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa)
|
|
$(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 key_usage=digital_signature,non_repudiation,key_encipherment version=3 output_file=$@
|
|
server1.key_usage_noauthid.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa)
|
|
$(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 key_usage=digital_signature,non_repudiation,key_encipherment authority_identifier=0 version=3 output_file=$@
|
|
server1.key_usage.der: server1.key_usage.crt
|
|
$(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@
|
|
all_final += server1.key_usage.crt server1.key_usage_noauthid.crt server1.key_usage.der
|
|
|
|
server1.cert_type.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa)
|
|
$(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 ns_cert_type=ssl_server version=3 output_file=$@
|
|
server1.cert_type_noauthid.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa)
|
|
$(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 ns_cert_type=ssl_server authority_identifier=0 version=3 output_file=$@
|
|
server1.cert_type.der: server1.cert_type.crt
|
|
$(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@
|
|
all_final += server1.cert_type.crt server1.cert_type_noauthid.crt server1.cert_type.der
|
|
|
|
server1.v1.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa)
|
|
$(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 version=1 output_file=$@
|
|
server1.v1.der: server1.v1.crt
|
|
$(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@
|
|
all_final += server1.v1.crt server1.v1.der
|
|
|
|
server1.ca.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa)
|
|
$(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 is_ca=1 version=3 output_file=$@
|
|
server1.ca_noauthid.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa)
|
|
$(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA1 authority_identifier=0 is_ca=1 version=3 output_file=$@
|
|
server1.ca.der: server1.ca.crt
|
|
$(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@
|
|
all_final += server1.ca.crt server1.ca_noauthid.crt server1.ca.der
|
|
|
|
server1_ca.crt: server1.crt $(test_ca_crt)
|
|
cat server1.crt $(test_ca_crt) > $@
|
|
all_final += server1_ca.crt
|
|
|
|
cert_sha1.crt: server1.key
|
|
$(MBEDTLS_CERT_WRITE) subject_key=server1.key subject_name="C=NL, O=PolarSSL, CN=PolarSSL Cert SHA1" serial=7 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA1 version=3 output_file=$@
|
|
all_final += cert_sha1.crt
|
|
|
|
cert_sha224.crt: server1.key
|
|
$(MBEDTLS_CERT_WRITE) subject_key=server1.key subject_name="C=NL, O=PolarSSL, CN=PolarSSL Cert SHA224" serial=8 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA224 version=3 output_file=$@
|
|
all_final += cert_sha224.crt
|
|
|
|
cert_sha256.crt: server1.key
|
|
$(MBEDTLS_CERT_WRITE) subject_key=server1.key subject_name="C=NL, O=PolarSSL, CN=PolarSSL Cert SHA256" serial=9 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA256 version=3 output_file=$@
|
|
all_final += cert_sha256.crt
|
|
|
|
cert_sha384.crt: server1.key
|
|
$(MBEDTLS_CERT_WRITE) subject_key=server1.key subject_name="C=NL, O=PolarSSL, CN=PolarSSL Cert SHA384" serial=10 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA384 version=3 output_file=$@
|
|
all_final += cert_sha384.crt
|
|
|
|
cert_sha512.crt: server1.key
|
|
$(MBEDTLS_CERT_WRITE) subject_key=server1.key subject_name="C=NL, O=PolarSSL, CN=PolarSSL Cert SHA512" serial=11 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA512 version=3 output_file=$@
|
|
all_final += cert_sha512.crt
|
|
|
|
cert_example_wildcard.crt: server1.key
|
|
$(MBEDTLS_CERT_WRITE) subject_key=server1.key subject_name="C=NL, O=PolarSSL, CN=*.example.com" serial=12 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA1 version=3 output_file=$@
|
|
all_final += cert_example_wildcard.crt
|
|
|
|
# OpenSSL-generated certificates for comparison
|
|
# Also provide certificates in DER format to allow
|
|
# direct binary comparison using e.g. dumpasn1
|
|
server1.crt.openssl server1.key_usage.crt.openssl server1.cert_type.crt.openssl: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) $(test_ca_server1_config_file)
|
|
echo "01" > $(test_ca_server1_serial)
|
|
rm -f $(test_ca_server1_db)
|
|
touch $(test_ca_server1_db)
|
|
$(OPENSSL) ca -batch -passin "pass:$(test_ca_pwd_rsa)" -config $(test_ca_server1_config_file) -in server1.req.sha256 -extensions v3_ext -extfile $@.v3_ext -out $@
|
|
server1.der.openssl: server1.crt.openssl
|
|
$(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@
|
|
server1.key_usage.der.openssl: server1.key_usage.crt.openssl
|
|
$(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@
|
|
server1.cert_type.der.openssl: server1.cert_type.crt.openssl
|
|
$(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@
|
|
|
|
server1.v1.crt.openssl: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) $(test_ca_server1_config_file)
|
|
echo "01" > $(test_ca_server1_serial)
|
|
rm -f $(test_ca_server1_db)
|
|
touch $(test_ca_server1_db)
|
|
$(OPENSSL) ca -batch -passin "pass:$(test_ca_pwd_rsa)" -config $(test_ca_server1_config_file) -in server1.req.sha256 -out $@
|
|
server1.v1.der.openssl: server1.v1.crt.openssl
|
|
$(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@
|
|
|
|
# To revoke certificate in the openssl database:
|
|
#
|
|
# $(OPENSSL) ca -gencrl -batch -cert $(test_ca_crt) -keyfile $(test_ca_key_file_rsa) -key $(test_ca_pwd_rsa) -config $(test_ca_server1_config_file) -md sha256 -crldays 365 -revoke server1.crt
|
|
|
|
crl.pem: $(test_ca_crt) $(test_ca_key_file_rsa) $(test_ca_config_file)
|
|
$(OPENSSL) ca -gencrl -batch -cert $(test_ca_crt) -keyfile $(test_ca_key_file_rsa) -key $(test_ca_pwd_rsa) -config $(test_ca_server1_config_file) -md sha1 -crldays 3653 -out $@
|
|
|
|
crl-futureRevocationDate.pem: $(test_ca_crt) $(test_ca_key_file_rsa) $(test_ca_config_file) test-ca.server1.future-crl.db test-ca.server1.future-crl.opensslconf
|
|
$(FAKETIME) '2028-12-31' $(OPENSSL) ca -gencrl -config test-ca.server1.future-crl.opensslconf -crldays 365 -passin "pass:$(test_ca_pwd_rsa)" -out $@
|
|
|
|
server1_all: crl.pem crl-futureRevocationDate.pem server1.crt server1.noauthid.crt server1.crt.openssl server1.v1.crt server1.v1.crt.openssl server1.key_usage.crt server1.key_usage_noauthid.crt server1.key_usage.crt.openssl server1.cert_type.crt server1.cert_type_noauthid.crt server1.cert_type.crt.openssl server1.der server1.der.openssl server1.v1.der server1.v1.der.openssl server1.key_usage.der server1.key_usage.der.openssl server1.cert_type.der server1.cert_type.der.openssl
|
|
|
|
# server2*
|
|
|
|
server2.crt: server2.req.sha256
|
|
$(MBEDTLS_CERT_WRITE) request_file=server2.req.sha256 serial=2 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA1 version=3 output_file=$@
|
|
all_final += server2.crt
|
|
|
|
server2.der: server2.crt
|
|
$(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@
|
|
all_final += server2.crt server2.der
|
|
|
|
server2-sha256.crt: server2.req.sha256
|
|
$(MBEDTLS_CERT_WRITE) request_file=server2.req.sha256 serial=2 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA256 version=3 output_file=$@
|
|
all_final += server2-sha256.crt
|
|
|
|
# MD5 test certificate
|
|
|
|
cert_md_test_key = $(cli_crt_key_file_rsa)
|
|
|
|
cert_md5.csr: $(cert_md_test_key)
|
|
$(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Cert MD5" md=MD5
|
|
all_intermediate += cert_md5.csr
|
|
|
|
cert_md5.crt: cert_md5.csr
|
|
$(MBEDTLS_CERT_WRITE) request_file=$< serial=6 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20000101121212 not_after=20300101121212 md=MD5 version=3 output_file=$@
|
|
all_final += cert_md5.crt
|
|
|
|
# TLSv1.3 test certificates
|
|
ecdsa_secp256r1.key: ec_256_prv.pem
|
|
cp $< $@
|
|
|
|
ecdsa_secp256r1.csr: ecdsa_secp256r1.key
|
|
$(OPENSSL) req -new -subj "/C=NL/O=PolarSSL/CN=localhost" \
|
|
-key $< -out $@
|
|
all_intermediate += ecdsa_secp256r1.csr
|
|
ecdsa_secp256r1.crt: ecdsa_secp256r1.csr
|
|
$(OPENSSL) x509 -req -CA $(test_ca_crt_file_ec) -CAkey $(test_ca_key_file_ec) \
|
|
-set_serial 77 -days 3653 -sha384 -in $< -out $@
|
|
all_final += ecdsa_secp256r1.crt ecdsa_secp256r1.key
|
|
tls13_certs: ecdsa_secp256r1.crt ecdsa_secp256r1.key
|
|
|
|
ecdsa_secp384r1.key: ec_384_prv.pem
|
|
cp $< $@
|
|
ecdsa_secp384r1.csr: ecdsa_secp384r1.key
|
|
$(OPENSSL) req -new -subj "/C=NL/O=PolarSSL/CN=localhost" \
|
|
-key $< -out $@
|
|
all_intermediate += ecdsa_secp384r1.csr
|
|
ecdsa_secp384r1.crt: ecdsa_secp384r1.csr
|
|
$(OPENSSL) x509 -req -CA $(test_ca_crt_file_ec) -CAkey $(test_ca_key_file_ec) \
|
|
-set_serial 77 -days 3653 -sha384 -in $< -out $@
|
|
all_final += ecdsa_secp384r1.crt ecdsa_secp384r1.key
|
|
tls13_certs: ecdsa_secp384r1.crt ecdsa_secp384r1.key
|
|
|
|
ecdsa_secp521r1.key: ec_521_prv.pem
|
|
cp $< $@
|
|
ecdsa_secp521r1.csr: ecdsa_secp521r1.key
|
|
$(OPENSSL) req -new -subj "/C=NL/O=PolarSSL/CN=localhost" \
|
|
-key $< -out $@
|
|
all_intermediate += ecdsa_secp521r1.csr
|
|
ecdsa_secp521r1.crt: ecdsa_secp521r1.csr
|
|
$(OPENSSL) x509 -req -CA $(test_ca_crt_file_ec) -CAkey $(test_ca_key_file_ec) \
|
|
-set_serial 77 -days 3653 -sha384 -in $< -out $@
|
|
all_final += ecdsa_secp521r1.crt ecdsa_secp521r1.key
|
|
tls13_certs: ecdsa_secp521r1.crt ecdsa_secp521r1.key
|
|
|
|
# PKCS7 test data
|
|
pkcs7_test_cert_1 = pkcs7-rsa-sha256-1.crt
|
|
pkcs7_test_cert_2 = pkcs7-rsa-sha256-2.crt
|
|
pkcs7_test_file = pkcs7_data.txt
|
|
|
|
# Generate signing cert
|
|
pkcs7-rsa-sha256-1.crt:
|
|
$(OPENSSL) req -x509 -subj="/C=NL/O=PKCS7/CN=PKCS7 Cert 1" -sha256 -nodes -days 365 -newkey rsa:2048 -keyout pkcs7-rsa-sha256-1.key -out pkcs7-rsa-sha256-1.crt
|
|
cat pkcs7-rsa-sha256-1.crt pkcs7-rsa-sha256-1.key > pkcs7-rsa-sha256-1.pem
|
|
all_final += pkcs7-rsa-sha256-1.crt
|
|
|
|
pkcs7-rsa-sha256-2.crt:
|
|
$(OPENSSL) req -x509 -subj="/C=NL/O=PKCS7/CN=PKCS7 Cert 2" -sha256 -nodes -days 365 -newkey rsa:2048 -keyout pkcs7-rsa-sha256-2.key -out pkcs7-rsa-sha256-2.crt
|
|
cat pkcs7-rsa-sha256-2.crt pkcs7-rsa-sha256-2.key > pkcs7-rsa-sha256-2.pem
|
|
all_final += pkcs7-rsa-sha256-2.crt
|
|
|
|
# Generate data file to be signed
|
|
pkcs7_data.txt:
|
|
echo "Hello" > $@
|
|
echo 2 >> pkcs7_data_1.txt
|
|
all_final += pkcs7_data.txt
|
|
|
|
# Generate another data file to check hash mismatch during certificate verification
|
|
pkcs7_data_1.txt: $(pkcs7_test_file)
|
|
cat $(pkcs7_test_file) > $@
|
|
echo 2 >> $@
|
|
all_final += pkcs7_data_1.txt
|
|
|
|
# pkcs7 signature file with CERT
|
|
pkcs7_data_cert_signed_sha256.der: $(pkcs7_test_file) $(pkcs7_test_cert_1)
|
|
$(OPENSSL) smime -sign -binary -in pkcs7_data.txt -out $@ -md sha256 -signer pkcs7-rsa-sha256-1.pem -noattr -outform DER -out $@
|
|
all_final += pkcs7_data_cert_signed_sha256.der
|
|
|
|
# pkcs7 signature file with CERT and sha1
|
|
pkcs7_data_cert_signed_sha1.der: $(pkcs7_test_file) $(pkcs7_test_cert_1)
|
|
$(OPENSSL) smime -sign -binary -in pkcs7_data.txt -out $@ -md sha1 -signer pkcs7-rsa-sha256-1.pem -noattr -outform DER -out $@
|
|
all_final += pkcs7_data_cert_signed_sha1.der
|
|
|
|
# pkcs7 signature file with CERT and sha512
|
|
pkcs7_data_cert_signed_sha512.der: $(pkcs7_test_file) $(pkcs7_test_cert_1)
|
|
$(OPENSSL) smime -sign -binary -in pkcs7_data.txt -out $@ -md sha512 -signer pkcs7-rsa-sha256-1.pem -noattr -outform DER -out $@
|
|
all_final += pkcs7_data_cert_signed_sha512.der
|
|
|
|
# pkcs7 signature file without CERT
|
|
pkcs7_data_without_cert_signed.der: $(pkcs7_test_file) $(pkcs7_test_cert_1)
|
|
$(OPENSSL) smime -sign -binary -in pkcs7_data.txt -out $@ -md sha256 -signer pkcs7-rsa-sha256-1.pem -nocerts -noattr -outform DER -out $@
|
|
all_final += pkcs7_data_without_cert_signed.der
|
|
|
|
# pkcs7 signature file with multiple signers
|
|
pkcs7_data_multiple_signed.der: $(pkcs7_test_file) $(pkcs7_test_cert_1) $(pkcs7_test_cert_2)
|
|
$(OPENSSL) smime -sign -binary -in pkcs7_data.txt -out $@ -md sha256 -signer pkcs7-rsa-sha256-1.pem -signer pkcs7-rsa-sha256-2.pem -nocerts -noattr -outform DER -out $@
|
|
all_final += pkcs7_data_multiple_signed.der
|
|
|
|
# pkcs7 signature file with multiple certificates
|
|
pkcs7_data_multiple_certs_signed.der: $(pkcs7_test_file) $(pkcs7_test_cert_1) $(pkcs7_test_cert_2)
|
|
$(OPENSSL) smime -sign -binary -in pkcs7_data.txt -out $@ -md sha256 -signer pkcs7-rsa-sha256-1.pem -signer pkcs7-rsa-sha256-2.pem -noattr -outform DER -out $@
|
|
all_final += pkcs7_data_multiple_certs_signed.der
|
|
|
|
# pkcs7 signature file with corrupted CERT
|
|
pkcs7_data_signed_badcert.der: pkcs7_data_cert_signed_sha256.der
|
|
cp pkcs7_data_cert_signed_sha256.der $@
|
|
echo -en '\xa1' | dd of=$@ bs=1 seek=547 conv=notrunc
|
|
all_final += pkcs7_data_signed_badcert.der
|
|
|
|
# pkcs7 signature file with corrupted signer info
|
|
pkcs7_data_signed_badsigner.der: pkcs7_data_cert_signed_sha256.der
|
|
cp pkcs7_data_cert_signed_sha256.der $@
|
|
echo -en '\xa1' | dd of=$@ bs=1 seek=918 conv=notrunc
|
|
all_final += pkcs7_data_signed_badsigner.der
|
|
|
|
# pkcs7 file with version 2
|
|
pkcs7_data_cert_signed_v2.der: pkcs7_data_cert_signed_sha256.der
|
|
cp pkcs7_data_cert_signed_sha256.der $@
|
|
echo -en '\x02' | dd of=$@ bs=1 seek=25 conv=notrunc
|
|
all_final += pkcs7_data_cert_signed_v2.der
|
|
|
|
pkcs7_data_cert_encrypted.der: $(pkcs7_test_file) $(pkcs7_test_cert_1)
|
|
$(OPENSSL) smime -encrypt -aes256 -in pkcs7_data.txt -binary -outform DER -out $@ pkcs7-rsa-sha256-1.crt
|
|
all_final += pkcs7_data_cert_encrypted.der
|
|
|
|
## Negative tests
|
|
# For some interesting sizes, what happens if we make them off-by-one?
|
|
pkcs7_signerInfo_issuer_invalid_size.der: pkcs7_data_cert_signed_sha256.der
|
|
cp $< $@
|
|
echo -en '\x35' | dd of=$@ seek=919 bs=1 conv=notrunc
|
|
all_final += pkcs7_signerInfo_issuer_invalid_size.der
|
|
|
|
pkcs7_signerInfo_serial_invalid_size.der: pkcs7_data_cert_signed_sha256.der
|
|
cp $< $@
|
|
echo -en '\x15' | dd of=$@ seek=973 bs=1 conv=notrunc
|
|
all_final += pkcs7_signerInfo_serial_invalid_size.der
|
|
|
|
# pkcs7 signature file just with signed data
|
|
pkcs7_data_cert_signeddata_sha256.der: pkcs7_data_cert_signed_sha256.der
|
|
dd if=pkcs7_data_cert_signed_sha256.der of=$@ skip=19 bs=1
|
|
all_final += pkcs7_data_cert_signeddata_sha256.der
|
|
|
|
################################################################
|
|
#### Diffie-Hellman parameters
|
|
################################################################
|
|
|
|
dh.998.pem:
|
|
$(OPENSSL) dhparam -out $@ -text 998
|
|
|
|
dh.999.pem:
|
|
$(OPENSSL) dhparam -out $@ -text 999
|
|
|
|
################################################################
|
|
#### Meta targets
|
|
################################################################
|
|
|
|
all_final: $(all_final)
|
|
all: $(all_intermediate) $(all_final)
|
|
|
|
.PHONY: default all_final all
|
|
.PHONY: keys_rsa_all
|
|
.PHONY: keys_rsa_unenc keys_rsa_enc_basic
|
|
.PHONY: keys_rsa_enc_pkcs8_v1 keys_rsa_enc_pkcs8_v2
|
|
.PHONY: keys_rsa_enc_basic_1024 keys_rsa_enc_basic_2048 keys_rsa_enc_basic_4096
|
|
.PHONY: keys_rsa_enc_pkcs8_v1_1024 keys_rsa_enc_pkcs8_v2_1024
|
|
.PHONY: keys_rsa_enc_pkcs8_v1_2048 keys_rsa_enc_pkcs8_v2_2048
|
|
.PHONY: keys_rsa_enc_pkcs8_v1_4096 keys_rsa_enc_pkcs8_v2_4096
|
|
.PHONY: server1_all
|
|
|
|
# These files should not be committed to the repository.
|
|
list_intermediate:
|
|
@printf '%s\n' $(all_intermediate) | sort
|
|
# These files should be committed to the repository so that the test data is
|
|
# available upon checkout without running a randomized process depending on
|
|
# third-party tools.
|
|
list_final:
|
|
@printf '%s\n' $(all_final) | sort
|
|
.PHONY: list_intermediate list_final
|
|
|
|
## Remove intermediate files
|
|
clean:
|
|
rm -f $(all_intermediate)
|
|
## Remove all build products, even the ones that are committed
|
|
neat: clean
|
|
rm -f $(all_final)
|
|
.PHONY: clean neat
|