/** * \file ecp_invasive.h * * \brief ECP module: interfaces for invasive testing only. * * The interfaces in this file are intended for testing purposes only. * They SHOULD NOT be made available in library integrations except when * building the library for testing. */ /* * Copyright The Mbed TLS Contributors * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBEDTLS_ECP_INVASIVE_H #define MBEDTLS_ECP_INVASIVE_H #include "common.h" #include "mbedtls/bignum.h" #include "bignum_mod.h" #include "mbedtls/ecp.h" #if defined(MBEDTLS_TEST_HOOKS) && defined(MBEDTLS_ECP_LIGHT) #if defined(MBEDTLS_ECP_MONTGOMERY_ENABLED) /** Generate a private key on a Montgomery curve (Curve25519 or Curve448). * * This function implements key generation for the set of secret keys * specified in [Curve25519] p. 5 and in [Curve448]. The resulting value * has the lower bits masked but is not necessarily canonical. * * \note - [Curve25519] http://cr.yp.to/ecdh/curve25519-20060209.pdf * - [RFC7748] https://tools.ietf.org/html/rfc7748 * * \p high_bit The position of the high-order bit of the key to generate. * This is the bit-size of the key minus 1: * 254 for Curve25519 or 447 for Curve448. * \param d The randomly generated key. This is a number of size * exactly \p high_bit + 1 bits, with the least significant bits * masked as specified in [Curve25519] and in [RFC7748] ยง5. * \param f_rng The RNG function. * \param p_rng The RNG context to be passed to \p f_rng. * * \return \c 0 on success. * \return \c MBEDTLS_ERR_ECP_xxx or MBEDTLS_ERR_MPI_xxx on failure. */ int mbedtls_ecp_gen_privkey_mx(size_t high_bit, mbedtls_mpi *d, int (*f_rng)(void *, unsigned char *, size_t), void *p_rng); #endif /* MBEDTLS_ECP_MONTGOMERY_ENABLED */ #if defined(MBEDTLS_ECP_DP_SECP192R1_ENABLED) /** Fast quasi-reduction modulo p192 (FIPS 186-3 D.2.1) * * This operation expects a 384 bit MPI and the result of the reduction * is a 192 bit MPI. * * \param[in,out] Np The address of the MPI to be converted. * Must have twice as many limbs as the modulus. * Upon return this holds the reduced value. The bitlength * of the reduced value is the same as that of the modulus * (192 bits). * \param[in] Nn The length of \p Np in limbs. */ MBEDTLS_STATIC_TESTABLE int mbedtls_ecp_mod_p192_raw(mbedtls_mpi_uint *Np, size_t Nn); #endif /* MBEDTLS_ECP_DP_SECP192R1_ENABLED */ #if defined(MBEDTLS_ECP_DP_SECP224R1_ENABLED) /** Fast quasi-reduction modulo p224 (FIPS 186-3 D.2.2) * * \param[in,out] X The address of the MPI to be converted. * Must have exact limb size that stores a 448-bit MPI * (double the bitlength of the modulus). * Upon return holds the reduced value which is * in range `0 <= X < 2 * N` (where N is the modulus). * The bitlength of the reduced value is the same as * that of the modulus (224 bits). * \param[in] X_limbs The length of \p X in limbs. * * \return \c 0 on success. * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if \p X_limbs is not the * limb size that sores a 448-bit MPI. */ MBEDTLS_STATIC_TESTABLE int mbedtls_ecp_mod_p224_raw(mbedtls_mpi_uint *X, size_t X_limbs); #endif /* MBEDTLS_ECP_DP_SECP224R1_ENABLED */ #if defined(MBEDTLS_ECP_DP_SECP256R1_ENABLED) /** Fast quasi-reduction modulo p256 (FIPS 186-3 D.2.3) * * \param[in,out] X The address of the MPI to be converted. * Must have exact limb size that stores a 512-bit MPI * (double the bitlength of the modulus). * Upon return holds the reduced value which is * in range `0 <= X < 2 * N` (where N is the modulus). * The bitlength of the reduced value is the same as * that of the modulus (256 bits). * \param[in] X_limbs The length of \p X in limbs. * * \return \c 0 on success. * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if \p X_limbs is not the * limb size that sores a 512-bit MPI. */ MBEDTLS_STATIC_TESTABLE int mbedtls_ecp_mod_p256_raw(mbedtls_mpi_uint *X, size_t X_limbs); #endif #if defined(MBEDTLS_ECP_DP_SECP521R1_ENABLED) /** Fast quasi-reduction modulo p521 = 2^521 - 1 (FIPS 186-3 D.2.5) * * \param[in,out] X The address of the MPI to be converted. * Must have twice as many limbs as the modulus * (the modulus is 521 bits long). Upon return this * holds the reduced value. The reduced value is * in range `0 <= X < 2 * N` (where N is the modulus). * and its the bitlength is one plus the bitlength * of the modulus. * \param[in] X_limbs The length of \p X in limbs. * * \return \c 0 on success. * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if \p X_limbs does not have * twice as many limbs as the modulus. */ MBEDTLS_STATIC_TESTABLE int mbedtls_ecp_mod_p521_raw(mbedtls_mpi_uint *X, size_t X_limbs); #endif /* MBEDTLS_ECP_DP_SECP521R1_ENABLED */ #if defined(MBEDTLS_ECP_DP_SECP384R1_ENABLED) /** Fast quasi-reduction modulo p384 (FIPS 186-3 D.2.4) * * \param[in,out] X The address of the MPI to be converted. * Must have exact limb size that stores a 768-bit MPI * (double the bitlength of the modulus). * Upon return holds the reduced value which is * in range `0 <= X < 2 * N` (where N is the modulus). * The bitlength of the reduced value is the same as * that of the modulus (384 bits). * \param[in] X_limbs The length of \p N in limbs. * * \return \c 0 on success. * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if \p N_n does not have * twice as many limbs as the modulus. */ MBEDTLS_STATIC_TESTABLE int mbedtls_ecp_mod_p384_raw(mbedtls_mpi_uint *X, size_t X_limbs); #endif /* MBEDTLS_ECP_DP_SECP384R1_ENABLED */ #if defined(MBEDTLS_ECP_DP_SECP192K1_ENABLED) /** Fast quasi-reduction modulo p192k1 = 2^192 - R, * with R = 2^32 + 2^12 + 2^8 + 2^7 + 2^6 + 2^3 + 1 = 0x01000011C9 * * \param[in,out] X The address of the MPI to be converted. * Must have exact limb size that stores a 384-bit MPI * (double the bitlength of the modulus). * Upon return holds the reduced value which is * in range `0 <= X < 2 * N` (where N is the modulus). * The bitlength of the reduced value is the same as * that of the modulus (192 bits). * \param[in] X_limbs The length of \p X in limbs. * * \return \c 0 on success. * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if \p X does not have * twice as many limbs as the modulus. * \return #MBEDTLS_ERR_ECP_ALLOC_FAILED if memory allocation failed. */ MBEDTLS_STATIC_TESTABLE int mbedtls_ecp_mod_p192k1_raw(mbedtls_mpi_uint *X, size_t X_limbs); #endif /* MBEDTLS_ECP_DP_SECP192K1_ENABLED */ #if defined(MBEDTLS_ECP_DP_SECP224K1_ENABLED) /** Fast quasi-reduction modulo p224k1 = 2^224 - R, * with R = 2^32 + 2^12 + 2^11 + 2^9 + 2^7 + 2^4 + 2 + 1 = 0x0100001A93 * * \param[in,out] X The address of the MPI to be converted. * Must have exact limb size that stores a 448-bit MPI * (double the bitlength of the modulus). * Upon return holds the reduced value which is * in range `0 <= X < 2 * N` (where N is the modulus). * The bitlength of the reduced value is the same as * that of the modulus (224 bits). * \param[in] X_limbs The length of \p X in limbs. * * \return \c 0 on success. * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if \p X does not have * twice as many limbs as the modulus. * \return #MBEDTLS_ERR_ECP_ALLOC_FAILED if memory allocation failed. */ MBEDTLS_STATIC_TESTABLE int mbedtls_ecp_mod_p224k1_raw(mbedtls_mpi_uint *X, size_t X_limbs); #endif /* MBEDTLS_ECP_DP_SECP224K1_ENABLED */ #if defined(MBEDTLS_ECP_DP_SECP256K1_ENABLED) /** Fast quasi-reduction modulo p256k1 = 2^256 - R, * with R = 2^32 + 2^9 + 2^8 + 2^7 + 2^6 + 2^4 + 1 = 0x01000003D1 * * \param[in,out] X The address of the MPI to be converted. * Must have exact limb size that stores a 512-bit MPI * (double the bitlength of the modulus). * Upon return holds the reduced value which is * in range `0 <= X < 2 * N` (where N is the modulus). * The bitlength of the reduced value is the same as * that of the modulus (256 bits). * \param[in] X_limbs The length of \p X in limbs. * * \return \c 0 on success. * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if \p X does not have * twice as many limbs as the modulus. * \return #MBEDTLS_ERR_ECP_ALLOC_FAILED if memory allocation failed. */ MBEDTLS_STATIC_TESTABLE int mbedtls_ecp_mod_p256k1_raw(mbedtls_mpi_uint *X, size_t X_limbs); #endif /* MBEDTLS_ECP_DP_SECP256K1_ENABLED */ #if defined(MBEDTLS_ECP_DP_CURVE448_ENABLED) MBEDTLS_STATIC_TESTABLE int mbedtls_ecp_mod_p448(mbedtls_mpi_uint *X, size_t X_limbs); #endif /* MBEDTLS_ECP_DP_CURVE448_ENABLED */ /** Initialise a modulus with hard-coded const curve data. * * \note The caller is responsible for the \p N modulus' memory. * mbedtls_mpi_mod_modulus_free(&N) should be invoked at the * end of its lifecycle. * * \param[in,out] N The address of the modulus structure to populate. * Must be initialized. * \param[in] id The mbedtls_ecp_group_id for which to initialise the modulus. * \param[in] ctype The mbedtls_ecp_curve_type identifier for a coordinate modulus (P) * or a scalar modulus (N). * * \return \c 0 if successful. * \return #MBEDTLS_ERR_ECP_BAD_INPUT_DATA if the given MPIs do not * have the correct number of limbs. * */ MBEDTLS_STATIC_TESTABLE int mbedtls_ecp_modulus_setup(mbedtls_mpi_mod_modulus *N, const mbedtls_ecp_group_id id, const mbedtls_ecp_curve_type ctype); #endif /* MBEDTLS_TEST_HOOKS && MBEDTLS_ECP_C */ #endif /* MBEDTLS_ECP_INVASIVE_H */