/* * Copyright The Mbed TLS Contributors * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * * This file is part of mbed TLS (https://tls.mbed.org) */ /** * \file reader.h * * \brief This file defines reader objects, which together with their * sibling writer objects form the basis for the communication * between the various layers of the Mbed TLS messaging stack, * as well as the communication between the messaging stack and * the (D)TLS handshake protocol implementation. * * Readers provide a means of transferring incoming data from * a 'producer' providing it in chunks of arbitrary size, to * a 'consumer' which fetches and processes it in chunks of * again arbitrary, and potentially different, size. * * Readers can thus be seen as datagram-to-stream converters, * and they abstract away the following two tasks from the user: * 1. The pointer arithmetic of stepping through a producer- * provided chunk in smaller chunks. * 2. The merging of incoming data chunks in case the * consumer requests data in larger chunks than what the * producer provides. * * The basic abstract flow of operation is the following: * - Initially, the reader is in 'producing mode'. * - The producer hands an incoming data buffer to the reader, * moving it from 'producing' to 'consuming' mode. * - The consumer subsequently fetches and processes the buffer * content. Once that's done -- or partially done and a consumer's * requests can't be fulfilled -- the producer revokes the reader's * access to the incoming data buffer, putting the reader back to * producing mode. * - The producer subsequently gathers more incoming data and hands * it to reader until the latter switches back to consuming mode * if enough data is available for the last consumer request to * be satisfiable. * - Repeat the above. * * The abstract states of the reader from the producer's and * consumer's perspective are as follows: * * - From the perspective of the consumer, the state of the * reader consists of the following: * - A byte stream representing (concatenation of) the data * received through calls to mbedtls_mps_reader_get(), * - A marker within that byte stream indicating which data * need not be retained when the reader is passed back to * the producer via mbedtls_mps_reader_reclaim(). * The marker can be set via mbedtls_mps_reader_commit() * which places it at the end of the current byte stream. * The consumer need not be aware of the distinction between consumer * and producer mode, because he only interfaces with the reader * when the latter is in consuming mode. * * - From the perspective of the producer, the reader's state is one of: * - Attached: The reader is in consuming mode. * - Unset: No incoming data buffer is currently managed by the reader, * and all previously handed incoming data buffers have been * fully processed. More data needs to be fed into the reader * via mbedtls_mps_reader_feed(). * * - Accumulating: No incoming data buffer is currently managed by the * reader, but some data from the previous incoming data * buffer hasn't been processed yet and is internally * held back. * The Attached state belongs to consuming mode, while the Unset and * Accumulating states belong to producing mode. * * Transitioning from the Unset or Accumulating state to Attached is * done via successful calls to mbedtls_mps_reader_feed(), while * transitioning from Consuming to either Unset or Accumulating (depending * on what has been processed) is done via mbedtls_mps_reader_reclaim(). * * The following diagram depicts the producer-state progression: * * +------------------+ reclaim * | Unset +<-------------------------------------+ get * +--------|---------+ | +------+ * | | | | * | | | | * | feed +---------+---+--+ | * +--------------------------------------> <---+ * | Attached | * +--------------------------------------> <---+ * | feed, enough data available +---------+---+--+ | * | to serve previous consumer request | | | * | | | | * +--------+---------+ | +------+ * +----> Accumulating |<-------------------------------------+ commit * | +---+--------------+ reclaim, previous read request * | | couldn't be fulfilled * | | * +--------+ * feed, need more data to serve * previous consumer request * | * | * producing mode | consuming mode * | * */ #ifndef MBEDTLS_READER_H #define MBEDTLS_READER_H #include #include "mps_common.h" #include "mps_error.h" struct mbedtls_mps_reader; typedef struct mbedtls_mps_reader mbedtls_mps_reader; /* * Structure definitions */ struct mbedtls_mps_reader { unsigned char *frag; /*!< The fragment of incoming data managed by * the reader; it is provided to the reader * through mbedtls_mps_reader_feed(). The reader * does not own the fragment and does not * perform any allocation operations on it, * but does have read and write access to it. */ mbedtls_mps_stored_size_t frag_len; /*!< The length of the current fragment. * Must be 0 if \c frag == \c NULL. */ mbedtls_mps_stored_size_t commit; /*!< The offset of the last commit, relative * to the first byte in the fragment or, if * present, the accumulator. * This is only used when the reader is in * consuming mode, i.e. \c frag != \c NULL; * otherwise, its value is \c 0. */ mbedtls_mps_stored_size_t end; /*!< The offset of the end of the last chunk * passed to the user through a call to * mbedtls_mps_reader_get(), relative to the first * byte in the accumulator. * This is only used when the reader is in * consuming mode, i.e. \c frag != \c NULL; * otherwise, its value is \c 0. */ mbedtls_mps_stored_size_t pending; /*!< The amount of incoming data missing on the * last call to mbedtls_mps_reader_get(). * In particular, it is \c 0 if the last call * was successful. * If a reader is reclaimed after an * unsuccessful call to mbedtls_mps_reader_get(), * this variable is used to have the reader * remember how much data should be accumulated * so that the call to mbedtls_mps_reader_get() * succeeds next time. * This is only used when the reader is in * consuming mode, i.e. \c frag != \c NULL; * otherwise, its value is \c 0. */ /* The accumulator is only needed if we need to be able to pause * the reader. A few bytes could be saved by moving this to a * separate struct and using a pointer here. */ unsigned char *acc; /*!< The accumulator is used to gather incoming * data if a read-request via mbedtls_mps_reader_get() * cannot be served from the current fragment. */ mbedtls_mps_stored_size_t acc_len; /*!< The total size of the accumulator. */ mbedtls_mps_stored_size_t acc_available; /*!< The number of bytes currently gathered in * the accumulator. This is both used in * producing and in consuming mode: * While producing, it is increased until * it reaches the value of \c acc_remaining below. * While consuming, it is used to judge if a * read request can be served from the * accumulator or not. * Must not be larger than acc_len. */ union { mbedtls_mps_stored_size_t acc_remaining; /*!< This indicates the amount of data still * to be gathered in the accumulator. It is * only used in producing mode. * Must be at most acc_len - acc_available. */ mbedtls_mps_stored_size_t frag_offset; /*!< This indicates the offset of the current * fragment from the beginning of the * accumulator. * It is only used in consuming mode. * Must not be larger than \c acc_available. */ } acc_share; }; /* * API organization: * A reader object is usually prepared and maintained * by some lower layer and passed for usage to an upper * layer, and the API naturally splits according to which * layer is supposed to use the respective functions. */ /* * Maintenance API (Lower layer) */ /** * \brief Initialize a reader object * * \param reader The reader to be initialized. * \param acc The buffer to be used as a temporary accumulator * in case read requests through mbedtls_mps_reader_get() * exceed the buffer provided by mbedtls_mps_reader_feed(). * This buffer is owned by the caller and exclusive use * for reading and writing is given to the reade for the * duration of the reader's lifetime. It is thus the caller's * responsibility to maintain (and not touch) the buffer for * the lifetime of the reader, and to properly zeroize and * free the memory after the reader has been destroyed. * \param acc_len The size in Bytes of \p acc. * * \return \c 0 on success. * \return A negative \c MBEDTLS_ERR_READER_XXX error code on failure. */ int mbedtls_mps_reader_init( mbedtls_mps_reader *reader, unsigned char *acc, mbedtls_mps_size_t acc_len ); /** * \brief Free a reader object * * \param reader The reader to be freed. * * \return \c 0 on success. * \return A negative \c MBEDTLS_ERR_READER_XXX error code on failure. */ int mbedtls_mps_reader_free( mbedtls_mps_reader *reader ); /** * \brief Pass chunk of data for the reader to manage. * * \param reader The reader context to use. The reader must be * in producing state. * \param buf The buffer to be managed by the reader. * \param buflen The size in Bytes of \p buffer. * * \return \c 0 on success. In this case, the reader will be * moved to consuming state, and ownership of \p buf * will be passed to the reader until mbedtls_mps_reader_reclaim() * is called. * \return \c MBEDTLS_ERR_MPS_READER_NEED_MORE if more input data is * required to fulfill a previous request to mbedtls_mps_reader_get(). * In this case, the reader remains in producing state and * takes no ownership of the provided buffer (an internal copy * is made instead). * \return Another negative \c MBEDTLS_ERR_READER_XXX error code on * different kinds of failures. */ int mbedtls_mps_reader_feed( mbedtls_mps_reader *reader, unsigned char *buf, mbedtls_mps_size_t buflen ); /** * \brief Reclaim reader's access to the current input buffer. * * \param reader The reader context to use. The reader must be * in producing state. * \param paused If not \c NULL, the integer at address \p paused will be * modified to indicate whether the reader has been paused * (value \c 1) or not (value \c 0). Pausing happens if there * is uncommitted data and a previous request to * mbedtls_mps_reader_get() has exceeded the bounds of the * input buffer. * * \return \c 0 on success. * \return A negative \c MBEDTLS_ERR_READER_XXX error code on failure. */ int mbedtls_mps_reader_reclaim( mbedtls_mps_reader *reader, mbedtls_mps_size_t *paused ); /* * Usage API (Upper layer) */ /** * \brief Request data from the reader. * * \param reader The reader context to use. The reader must * in consuming state. * \param desired The desired amount of data to be read, in Bytes. * \param buffer The address to store the buffer pointer in. * This must not be \c NULL. * \param buflen The address to store the actual buffer * length in, or \c NULL. * * \return \c 0 on success. In this case, \c *buf holds the * address of a buffer of size \c *buflen * (if \c buflen != \c NULL) or \c desired * (if \c buflen == \c NULL). The user hass ownership * of the buffer until the next call mbedtls_mps_reader_reclaim(). * \return #MBEDTLS_ERR_MPS_READER_OUT_OF_DATA if there is not enough * data available to serve the read request. In this case, * the reader remains intact, and additional data can be * provided by reclaiming the current input buffer via * mbedtls_mps_reader_reclaim() and feeding a new one via * mbedtls_mps_reader_feed(). * \return Another negative \c MBEDTLS_ERR_READER_XXX error * code for different kinds of failure. * * \note Passing \c NULL as \p buflen is a convenient way to * indicate that fragmentation is not tolerated. * It's functionally equivalent to passing a valid * address as buflen and checking \c *buflen == \c desired * afterwards. */ int mbedtls_mps_reader_get( mbedtls_mps_reader *reader, mbedtls_mps_size_t desired, unsigned char **buffer, mbedtls_mps_size_t *buflen ); /** * \brief Mark data obtained from mbedtls_writer_get() as processed. * * This call indicates that all data received from prior calls to * mbedtls_mps_reader_fetch() has been or will have been * processed when mbedtls_mps_reader_reclaim() is called, * and thus need not be backed up. * * This function has no user observable effect until * mbedtls_mps_reader_reclaim() is called. In particular, * buffers received from mbedtls_mps_reader_fetch() remain * valid until mbedtls_mps_reader_reclaim() is called. * * \param reader The reader context to use. * * \return \c 0 on success. * \return A negative \c MBEDTLS_ERR_READER_XXX error code on failure. * */ int mbedtls_mps_reader_commit( mbedtls_mps_reader *reader ); #endif /* MBEDTLS_READER_H */