/* * PSA AEAD driver entry points */ /* * Copyright The Mbed TLS Contributors * SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later */ #ifndef PSA_CRYPTO_AEAD_H #define PSA_CRYPTO_AEAD_H #include /** * \brief Process an authenticated encryption operation. * * \note The signature of this function is that of a PSA driver * aead_encrypt entry point. This function behaves as an aead_encrypt * entry point as defined in the PSA driver interface specification for * transparent drivers. * * \param[in] attributes The attributes of the key to use for the * operation. * \param[in] key_buffer The buffer containing the key context. * \param key_buffer_size Size of the \p key_buffer buffer in bytes. * \param alg The AEAD algorithm to compute. * \param[in] nonce Nonce or IV to use. * \param nonce_length Size of the nonce buffer in bytes. This must * be appropriate for the selected algorithm. * The default nonce size is * PSA_AEAD_NONCE_LENGTH(key_type, alg) where * key_type is the type of key. * \param[in] additional_data Additional data that will be authenticated * but not encrypted. * \param additional_data_length Size of additional_data in bytes. * \param[in] plaintext Data that will be authenticated and encrypted. * \param plaintext_length Size of plaintext in bytes. * \param[out] ciphertext Output buffer for the authenticated and * encrypted data. The additional data is not * part of this output. For algorithms where the * encrypted data and the authentication tag are * defined as separate outputs, the * authentication tag is appended to the * encrypted data. * \param ciphertext_size Size of the ciphertext buffer in bytes. This * must be appropriate for the selected algorithm * and key: * - A sufficient output size is * PSA_AEAD_ENCRYPT_OUTPUT_SIZE(key_type, alg, * plaintext_length) where key_type is the type * of key. * - PSA_AEAD_ENCRYPT_OUTPUT_MAX_SIZE( * plaintext_length) evaluates to the maximum * ciphertext size of any supported AEAD * encryption. * \param[out] ciphertext_length On success, the size of the output in the * ciphertext buffer. * * \retval #PSA_SUCCESS Success. * \retval #PSA_ERROR_NOT_SUPPORTED * \p alg is not supported. * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription * \retval #PSA_ERROR_BUFFER_TOO_SMALL * ciphertext_size is too small. * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription */ psa_status_t mbedtls_psa_aead_encrypt( const psa_key_attributes_t *attributes, const uint8_t *key_buffer, size_t key_buffer_size, psa_algorithm_t alg, const uint8_t *nonce, size_t nonce_length, const uint8_t *additional_data, size_t additional_data_length, const uint8_t *plaintext, size_t plaintext_length, uint8_t *ciphertext, size_t ciphertext_size, size_t *ciphertext_length); /** * \brief Process an authenticated decryption operation. * * \note The signature of this function is that of a PSA driver * aead_decrypt entry point. This function behaves as an aead_decrypt * entry point as defined in the PSA driver interface specification for * transparent drivers. * * \param[in] attributes The attributes of the key to use for the * operation. * \param[in] key_buffer The buffer containing the key context. * \param key_buffer_size Size of the \p key_buffer buffer in bytes. * \param alg The AEAD algorithm to compute. * \param[in] nonce Nonce or IV to use. * \param nonce_length Size of the nonce buffer in bytes. This must * be appropriate for the selected algorithm. * The default nonce size is * PSA_AEAD_NONCE_LENGTH(key_type, alg) where * key_type is the type of key. * \param[in] additional_data Additional data that has been authenticated * but not encrypted. * \param additional_data_length Size of additional_data in bytes. * \param[in] ciphertext Data that has been authenticated and * encrypted. For algorithms where the encrypted * data and the authentication tag are defined * as separate inputs, the buffer contains * encrypted data followed by the authentication * tag. * \param ciphertext_length Size of ciphertext in bytes. * \param[out] plaintext Output buffer for the decrypted data. * \param plaintext_size Size of the plaintext buffer in bytes. This * must be appropriate for the selected algorithm * and key: * - A sufficient output size is * PSA_AEAD_DECRYPT_OUTPUT_SIZE(key_type, alg, * ciphertext_length) where key_type is the * type of key. * - PSA_AEAD_DECRYPT_OUTPUT_MAX_SIZE( * ciphertext_length) evaluates to the maximum * plaintext size of any supported AEAD * decryption. * \param[out] plaintext_length On success, the size of the output in the * plaintext buffer. * * \retval #PSA_SUCCESS Success. * \retval #PSA_ERROR_INVALID_SIGNATURE * The cipher is not authentic. * \retval #PSA_ERROR_NOT_SUPPORTED * \p alg is not supported. * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription * \retval #PSA_ERROR_BUFFER_TOO_SMALL * plaintext_size is too small. * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription */ psa_status_t mbedtls_psa_aead_decrypt( const psa_key_attributes_t *attributes, const uint8_t *key_buffer, size_t key_buffer_size, psa_algorithm_t alg, const uint8_t *nonce, size_t nonce_length, const uint8_t *additional_data, size_t additional_data_length, const uint8_t *ciphertext, size_t ciphertext_length, uint8_t *plaintext, size_t plaintext_size, size_t *plaintext_length); /** Set the key for a multipart authenticated encryption operation. * * \note The signature of this function is that of a PSA driver * aead_encrypt_setup entry point. This function behaves as an * aead_encrypt_setup entry point as defined in the PSA driver interface * specification for transparent drivers. * * If an error occurs at any step after a call to * mbedtls_psa_aead_encrypt_setup(), the operation is reset by the PSA core by a * call to mbedtls_psa_aead_abort(). The PSA core may call * mbedtls_psa_aead_abort() at any time after the operation has been * initialized, and is required to when the operation is no longer needed. * * \param[in,out] operation The operation object to set up. It must have * been initialized as per the documentation for * #mbedtls_psa_aead_operation_t and not yet in * use. * \param[in] attributes The attributes of the key to use for the * operation. * \param[in] key_buffer The buffer containing the key context. * \param key_buffer_size Size of the \p key_buffer buffer in bytes. It must be consistent with the size in bits recorded in \p attributes. * \param alg The AEAD algorithm to compute * (\c PSA_ALG_XXX value such that * #PSA_ALG_IS_AEAD(\p alg) is true). * * \retval #PSA_SUCCESS * Success. * \retval #PSA_ERROR_INVALID_ARGUMENT * An invalid block length was supplied. * \retval #PSA_ERROR_NOT_SUPPORTED * \p alg is not supported. * \retval #PSA_ERROR_INSUFFICIENT_MEMORY * Failed to allocate memory for key material */ psa_status_t mbedtls_psa_aead_encrypt_setup( mbedtls_psa_aead_operation_t *operation, const psa_key_attributes_t *attributes, const uint8_t *key_buffer, size_t key_buffer_size, psa_algorithm_t alg); /** Set the key for a multipart authenticated decryption operation. * * \note The signature of this function is that of a PSA driver * aead_decrypt_setup entry point. This function behaves as an * aead_decrypt_setup entry point as defined in the PSA driver interface * specification for transparent drivers. * * If an error occurs at any step after a call to * mbedtls_psa_aead_decrypt_setup(), the PSA core resets the operation by a * call to mbedtls_psa_aead_abort(). The PSA core may call * mbedtls_psa_aead_abort() at any time after the operation has been * initialized, and is required to when the operation is no longer needed. * * \param[in,out] operation The operation object to set up. It must have * been initialized as per the documentation for * #mbedtls_psa_aead_operation_t and not yet in * use. * \param[in] attributes The attributes of the key to use for the * operation. * \param[in] key_buffer The buffer containing the key context. * \param key_buffer_size Size of the \p key_buffer buffer in bytes. It must be consistent with the size in bits recorded in \p attributes. * \param alg The AEAD algorithm to compute * (\c PSA_ALG_XXX value such that * #PSA_ALG_IS_AEAD(\p alg) is true). * * \retval #PSA_SUCCESS * Success. * \retval #PSA_ERROR_INVALID_ARGUMENT * An invalid block length was supplied. * \retval #PSA_ERROR_NOT_SUPPORTED * \p alg is not supported. * \retval #PSA_ERROR_INSUFFICIENT_MEMORY * Failed to allocate memory for key material */ psa_status_t mbedtls_psa_aead_decrypt_setup( mbedtls_psa_aead_operation_t *operation, const psa_key_attributes_t *attributes, const uint8_t *key_buffer, size_t key_buffer_size, psa_algorithm_t alg); /** Set the nonce for an authenticated encryption or decryption operation. * * \note The signature of this function is that of a PSA driver aead_set_nonce * entry point. This function behaves as an aead_set_nonce entry point as * defined in the PSA driver interface specification for transparent * drivers. * * This function sets the nonce for the authenticated * encryption or decryption operation. * * The PSA core calls mbedtls_psa_aead_encrypt_setup() or * mbedtls_psa_aead_decrypt_setup() before calling this function. * * If this function returns an error status, the PSA core will call * mbedtls_psa_aead_abort(). * * \param[in,out] operation Active AEAD operation. * \param[in] nonce Buffer containing the nonce to use. * \param nonce_length Size of the nonce in bytes. * * \retval #PSA_SUCCESS * Success. * \retval #PSA_ERROR_INVALID_ARGUMENT * The size of \p nonce is not acceptable for the chosen algorithm. * \retval #PSA_ERROR_NOT_SUPPORTED * Algorithm previously set is not supported in this configuration of * the library. */ psa_status_t mbedtls_psa_aead_set_nonce( mbedtls_psa_aead_operation_t *operation, const uint8_t *nonce, size_t nonce_length); /** Declare the lengths of the message and additional data for AEAD. * * \note The signature of this function is that of a PSA driver aead_set_lengths * entry point. This function behaves as an aead_set_lengths entry point * as defined in the PSA driver interface specification for transparent * drivers. * * The PSA core calls this function before calling mbedtls_psa_aead_update_ad() * or mbedtls_psa_aead_update() if the algorithm for the operation requires it. * If the algorithm does not require it, calling this function is optional, but * if this function is called then the implementation must enforce the lengths. * * The PSA core may call this function before or after setting the nonce with * mbedtls_psa_aead_set_nonce(). * * - For #PSA_ALG_CCM, calling this function is required. * - For the other AEAD algorithms defined in this specification, calling * this function is not required. * * If this function returns an error status, the PSA core calls * mbedtls_psa_aead_abort(). * * \param[in,out] operation Active AEAD operation. * \param ad_length Size of the non-encrypted additional * authenticated data in bytes. * \param plaintext_length Size of the plaintext to encrypt in bytes. * * \retval #PSA_SUCCESS * Success. * \retval #PSA_ERROR_INVALID_ARGUMENT * At least one of the lengths is not acceptable for the chosen * algorithm. * \retval #PSA_ERROR_NOT_SUPPORTED * Algorithm previously set is not supported in this configuration of * the library. */ psa_status_t mbedtls_psa_aead_set_lengths( mbedtls_psa_aead_operation_t *operation, size_t ad_length, size_t plaintext_length); /** Pass additional data to an active AEAD operation. * * \note The signature of this function is that of a PSA driver * aead_update_ad entry point. This function behaves as an aead_update_ad * entry point as defined in the PSA driver interface specification for * transparent drivers. * * Additional data is authenticated, but not encrypted. * * The PSA core can call this function multiple times to pass successive * fragments of the additional data. It will not call this function after * passing data to encrypt or decrypt with mbedtls_psa_aead_update(). * * Before calling this function, the PSA core will: * 1. Call either mbedtls_psa_aead_encrypt_setup() or * mbedtls_psa_aead_decrypt_setup(). * 2. Set the nonce with mbedtls_psa_aead_set_nonce(). * * If this function returns an error status, the PSA core will call * mbedtls_psa_aead_abort(). * * \param[in,out] operation Active AEAD operation. * \param[in] input Buffer containing the fragment of * additional data. * \param input_length Size of the \p input buffer in bytes. * * \retval #PSA_SUCCESS * Success. * \retval #PSA_ERROR_NOT_SUPPORTED * Algorithm previously set is not supported in this configuration of * the library. */ psa_status_t mbedtls_psa_aead_update_ad( mbedtls_psa_aead_operation_t *operation, const uint8_t *input, size_t input_length); /** Encrypt or decrypt a message fragment in an active AEAD operation. * * \note The signature of this function is that of a PSA driver * aead_update entry point. This function behaves as an aead_update entry * point as defined in the PSA driver interface specification for * transparent drivers. * * Before calling this function, the PSA core will: * 1. Call either mbedtls_psa_aead_encrypt_setup() or * mbedtls_psa_aead_decrypt_setup(). The choice of setup function * determines whether this function encrypts or decrypts its input. * 2. Set the nonce with mbedtls_psa_aead_set_nonce(). * 3. Call mbedtls_psa_aead_update_ad() to pass all the additional data. * * If this function returns an error status, the PSA core will call * mbedtls_psa_aead_abort(). * * This function does not require the input to be aligned to any * particular block boundary. If the implementation can only process * a whole block at a time, it must consume all the input provided, but * it may delay the end of the corresponding output until a subsequent * call to mbedtls_psa_aead_update(), mbedtls_psa_aead_finish() provides * sufficient input. The amount of data that can be delayed in this way is * bounded by #PSA_AEAD_UPDATE_OUTPUT_SIZE. * * \param[in,out] operation Active AEAD operation. * \param[in] input Buffer containing the message fragment to * encrypt or decrypt. * \param input_length Size of the \p input buffer in bytes. * \param[out] output Buffer where the output is to be written. * \param output_size Size of the \p output buffer in bytes. * This must be appropriate for the selected * algorithm and key: * - A sufficient output size is * #PSA_AEAD_UPDATE_OUTPUT_SIZE(\c key_type, * \c alg, \p input_length) where * \c key_type is the type of key and \c alg is * the algorithm that were used to set up the * operation. * - #PSA_AEAD_UPDATE_OUTPUT_MAX_SIZE(\p * input_length) evaluates to the maximum * output size of any supported AEAD * algorithm. * \param[out] output_length On success, the number of bytes * that make up the returned output. * * \retval #PSA_SUCCESS * Success. * * \retval #PSA_ERROR_BUFFER_TOO_SMALL * The size of the \p output buffer is too small. * #PSA_AEAD_UPDATE_OUTPUT_SIZE(\c key_type, \c alg, \p input_length) or * #PSA_AEAD_UPDATE_OUTPUT_MAX_SIZE(\p input_length) can be used to * determine the required buffer size. */ psa_status_t mbedtls_psa_aead_update( mbedtls_psa_aead_operation_t *operation, const uint8_t *input, size_t input_length, uint8_t *output, size_t output_size, size_t *output_length); /** Finish encrypting a message in an AEAD operation. * * \note The signature of this function is that of a PSA driver * aead_finish entry point. This function behaves as an aead_finish entry * point as defined in the PSA driver interface specification for * transparent drivers. * * The operation must have been set up by the PSA core with * mbedtls_psa_aead_encrypt_setup(). * * This function finishes the authentication of the additional data * formed by concatenating the inputs passed to preceding calls to * mbedtls_psa_aead_update_ad() with the plaintext formed by concatenating the * inputs passed to preceding calls to mbedtls_psa_aead_update(). * * This function has two output buffers: * - \p ciphertext contains trailing ciphertext that was buffered from * preceding calls to mbedtls_psa_aead_update(). * - \p tag contains the authentication tag. * * Whether or not this function returns successfully, the PSA core subsequently * calls mbedtls_psa_aead_abort() to deactivate the operation. * * \param[in,out] operation Active AEAD operation. * \param[out] ciphertext Buffer where the last part of the ciphertext * is to be written. * \param ciphertext_size Size of the \p ciphertext buffer in bytes. * This must be appropriate for the selected * algorithm and key: * - A sufficient output size is * #PSA_AEAD_FINISH_OUTPUT_SIZE(\c key_type, * \c alg) where \c key_type is the type of key * and \c alg is the algorithm that were used to * set up the operation. * - #PSA_AEAD_FINISH_OUTPUT_MAX_SIZE evaluates to * the maximum output size of any supported AEAD * algorithm. * \param[out] ciphertext_length On success, the number of bytes of * returned ciphertext. * \param[out] tag Buffer where the authentication tag is * to be written. * \param tag_size Size of the \p tag buffer in bytes. * This must be appropriate for the selected * algorithm and key: * - The exact tag size is #PSA_AEAD_TAG_LENGTH(\c * key_type, \c key_bits, \c alg) where * \c key_type and \c key_bits are the type and * bit-size of the key, and \c alg are the * algorithm that were used in the call to * mbedtls_psa_aead_encrypt_setup(). * - #PSA_AEAD_TAG_MAX_SIZE evaluates to the * maximum tag size of any supported AEAD * algorithm. * \param[out] tag_length On success, the number of bytes * that make up the returned tag. * * \retval #PSA_SUCCESS * Success. * \retval #PSA_ERROR_BUFFER_TOO_SMALL * The size of the \p tag buffer is too small. * #PSA_AEAD_TAG_LENGTH(\c key_type, key_bits, \c alg) or * #PSA_AEAD_TAG_MAX_SIZE can be used to determine the required \p tag * buffer size. */ psa_status_t mbedtls_psa_aead_finish( mbedtls_psa_aead_operation_t *operation, uint8_t *ciphertext, size_t ciphertext_size, size_t *ciphertext_length, uint8_t *tag, size_t tag_size, size_t *tag_length); /** Abort an AEAD operation. * * \note The signature of this function is that of a PSA driver * aead_abort entry point. This function behaves as an aead_abort entry * point as defined in the PSA driver interface specification for * transparent drivers. * * Aborting an operation frees all associated resources except for the * \p operation structure itself. Once aborted, the operation object * can be reused for another operation by the PSA core by it calling * mbedtls_psa_aead_encrypt_setup() or mbedtls_psa_aead_decrypt_setup() again. * * The PSA core may call this function any time after the operation object has * been initialized as described in #mbedtls_psa_aead_operation_t. * * In particular, calling mbedtls_psa_aead_abort() after the operation has been * terminated by a call to mbedtls_psa_aead_abort() or * mbedtls_psa_aead_finish() is safe and has no effect. * * \param[in,out] operation Initialized AEAD operation. * * \retval #PSA_SUCCESS * Success. */ psa_status_t mbedtls_psa_aead_abort( mbedtls_psa_aead_operation_t *operation); #endif /* PSA_CRYPTO_AEAD_H */