/* * PSA crypto core internal interfaces */ /* * Copyright The Mbed TLS Contributors * SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later */ #ifndef PSA_CRYPTO_CORE_H #define PSA_CRYPTO_CORE_H /* * Include the build-time configuration information header. Here, we do not * include `"mbedtls/build_info.h"` directly but `"psa/build_info.h"`, which * is basically just an alias to it. This is to ease the maintenance of the * TF-PSA-Crypto repository which has a different build system and * configuration. */ #include "psa/build_info.h" #include "psa/crypto.h" #include "psa/crypto_se_driver.h" /** * Tell if PSA is ready for this hash. * * \note For now, only checks the state of the driver subsystem, * not the algorithm. Might do more in the future. * * \param hash_alg The hash algorithm (ignored for now). * * \return 1 if the driver subsytem is ready, 0 otherwise. */ int psa_can_do_hash(psa_algorithm_t hash_alg); /** The data structure representing a key slot, containing key material * and metadata for one key. */ typedef struct { psa_core_key_attributes_t attr; /* * Number of locks on the key slot held by the library. * * This counter is incremented by one each time a library function * retrieves through one of the dedicated internal API a pointer to the * key slot. * * This counter is decremented by one each time a library function stops * accessing the key slot and states it by calling the * psa_unlock_key_slot() API. * * This counter is used to prevent resetting the key slot while the library * may access it. For example, such control is needed in the following * scenarios: * . In case of key slot starvation, all key slots contain the description * of a key, and the library asks for the description of a persistent * key not present in the key slots, the key slots currently accessed by * the library cannot be reclaimed to free a key slot to load the * persistent key. * . In case of a multi-threaded application where one thread asks to close * or purge or destroy a key while it is in used by the library through * another thread. */ size_t lock_count; /* Dynamically allocated key data buffer. * Format as specified in psa_export_key(). */ struct key_data { uint8_t *data; size_t bytes; } key; } psa_key_slot_t; /* A mask of key attribute flags used only internally. * Currently there aren't any. */ #define PSA_KA_MASK_INTERNAL_ONLY ( \ 0) /** Test whether a key slot is occupied. * * A key slot is occupied iff the key type is nonzero. This works because * no valid key can have 0 as its key type. * * \param[in] slot The key slot to test. * * \return 1 if the slot is occupied, 0 otherwise. */ static inline int psa_is_key_slot_occupied(const psa_key_slot_t *slot) { return slot->attr.type != 0; } /** Test whether a key slot is locked. * * A key slot is locked iff its lock counter is strictly greater than 0. * * \param[in] slot The key slot to test. * * \return 1 if the slot is locked, 0 otherwise. */ static inline int psa_is_key_slot_locked(const psa_key_slot_t *slot) { return slot->lock_count > 0; } /** Retrieve flags from psa_key_slot_t::attr::core::flags. * * \param[in] slot The key slot to query. * \param mask The mask of bits to extract. * * \return The key attribute flags in the given slot, * bitwise-anded with \p mask. */ static inline uint16_t psa_key_slot_get_flags(const psa_key_slot_t *slot, uint16_t mask) { return slot->attr.flags & mask; } /** Set flags in psa_key_slot_t::attr::core::flags. * * \param[in,out] slot The key slot to modify. * \param mask The mask of bits to modify. * \param value The new value of the selected bits. */ static inline void psa_key_slot_set_flags(psa_key_slot_t *slot, uint16_t mask, uint16_t value) { slot->attr.flags = ((~mask & slot->attr.flags) | (mask & value)); } /** Turn on flags in psa_key_slot_t::attr::core::flags. * * \param[in,out] slot The key slot to modify. * \param mask The mask of bits to set. */ static inline void psa_key_slot_set_bits_in_flags(psa_key_slot_t *slot, uint16_t mask) { slot->attr.flags |= mask; } /** Turn off flags in psa_key_slot_t::attr::core::flags. * * \param[in,out] slot The key slot to modify. * \param mask The mask of bits to clear. */ static inline void psa_key_slot_clear_bits(psa_key_slot_t *slot, uint16_t mask) { slot->attr.flags &= ~mask; } #if defined(MBEDTLS_PSA_CRYPTO_SE_C) /** Get the SE slot number of a key from the key slot storing its description. * * \param[in] slot The key slot to query. This must be a key slot storing * the description of a key of a dynamically registered * secure element, otherwise the behaviour is undefined. */ static inline psa_key_slot_number_t psa_key_slot_get_slot_number( const psa_key_slot_t *slot) { return *((psa_key_slot_number_t *) (slot->key.data)); } #endif /** Completely wipe a slot in memory, including its policy. * * Persistent storage is not affected. * * \param[in,out] slot The key slot to wipe. * * \retval #PSA_SUCCESS * Success. This includes the case of a key slot that was * already fully wiped. * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription */ psa_status_t psa_wipe_key_slot(psa_key_slot_t *slot); /** Try to allocate a buffer to an empty key slot. * * \param[in,out] slot Key slot to attach buffer to. * \param[in] buffer_length Requested size of the buffer. * * \retval #PSA_SUCCESS * The buffer has been successfully allocated. * \retval #PSA_ERROR_INSUFFICIENT_MEMORY * Not enough memory was available for allocation. * \retval #PSA_ERROR_ALREADY_EXISTS * Trying to allocate a buffer to a non-empty key slot. */ psa_status_t psa_allocate_buffer_to_slot(psa_key_slot_t *slot, size_t buffer_length); /** Wipe key data from a slot. Preserves metadata such as the policy. */ psa_status_t psa_remove_key_data_from_memory(psa_key_slot_t *slot); /** Copy key data (in export format) into an empty key slot. * * This function assumes that the slot does not contain * any key material yet. On failure, the slot content is unchanged. * * \param[in,out] slot Key slot to copy the key into. * \param[in] data Buffer containing the key material. * \param data_length Size of the key buffer. * * \retval #PSA_SUCCESS * The key has been copied successfully. * \retval #PSA_ERROR_INSUFFICIENT_MEMORY * Not enough memory was available for allocation of the * copy buffer. * \retval #PSA_ERROR_ALREADY_EXISTS * There was other key material already present in the slot. */ psa_status_t psa_copy_key_material_into_slot(psa_key_slot_t *slot, const uint8_t *data, size_t data_length); /** Convert an Mbed TLS error code to a PSA error code * * \note This function is provided solely for the convenience of * Mbed TLS and may be removed at any time without notice. * * \param ret An Mbed TLS-thrown error code * * \return The corresponding PSA error code */ psa_status_t mbedtls_to_psa_error(int ret); /** Import a key in binary format. * * \note The signature of this function is that of a PSA driver * import_key entry point. This function behaves as an import_key * entry point as defined in the PSA driver interface specification for * transparent drivers. * * \param[in] attributes The attributes for the key to import. * \param[in] data The buffer containing the key data in import * format. * \param[in] data_length Size of the \p data buffer in bytes. * \param[out] key_buffer The buffer to contain the key data in output * format upon successful return. * \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes. This * size is greater or equal to \p data_length. * \param[out] key_buffer_length The length of the data written in \p * key_buffer in bytes. * \param[out] bits The key size in number of bits. * * \retval #PSA_SUCCESS The key was imported successfully. * \retval #PSA_ERROR_INVALID_ARGUMENT * The key data is not correctly formatted. * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription */ psa_status_t psa_import_key_into_slot( const psa_key_attributes_t *attributes, const uint8_t *data, size_t data_length, uint8_t *key_buffer, size_t key_buffer_size, size_t *key_buffer_length, size_t *bits); /** Export a key in binary format * * \note The signature of this function is that of a PSA driver export_key * entry point. This function behaves as an export_key entry point as * defined in the PSA driver interface specification. * * \param[in] attributes The attributes for the key to export. * \param[in] key_buffer Material or context of the key to export. * \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes. * \param[out] data Buffer where the key data is to be written. * \param[in] data_size Size of the \p data buffer in bytes. * \param[out] data_length On success, the number of bytes written in * \p data * * \retval #PSA_SUCCESS The key was exported successfully. * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription */ psa_status_t psa_export_key_internal( const psa_key_attributes_t *attributes, const uint8_t *key_buffer, size_t key_buffer_size, uint8_t *data, size_t data_size, size_t *data_length); /** Export a public key or the public part of a key pair in binary format. * * \note The signature of this function is that of a PSA driver * export_public_key entry point. This function behaves as an * export_public_key entry point as defined in the PSA driver interface * specification. * * \param[in] attributes The attributes for the key to export. * \param[in] key_buffer Material or context of the key to export. * \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes. * \param[out] data Buffer where the key data is to be written. * \param[in] data_size Size of the \p data buffer in bytes. * \param[out] data_length On success, the number of bytes written in * \p data * * \retval #PSA_SUCCESS The public key was exported successfully. * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription */ psa_status_t psa_export_public_key_internal( const psa_key_attributes_t *attributes, const uint8_t *key_buffer, size_t key_buffer_size, uint8_t *data, size_t data_size, size_t *data_length); /** * \brief Generate a key. * * \note The signature of the function is that of a PSA driver generate_key * entry point. * * \param[in] attributes The attributes for the key to generate. * \param[out] key_buffer Buffer where the key data is to be written. * \param[in] key_buffer_size Size of \p key_buffer in bytes. * \param[out] key_buffer_length On success, the number of bytes written in * \p key_buffer. * * \retval #PSA_SUCCESS * The key was generated successfully. * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription * \retval #PSA_ERROR_NOT_SUPPORTED * Key size in bits or type not supported. * \retval #PSA_ERROR_BUFFER_TOO_SMALL * The size of \p key_buffer is too small. */ psa_status_t psa_generate_key_internal(const psa_key_attributes_t *attributes, uint8_t *key_buffer, size_t key_buffer_size, size_t *key_buffer_length); /** Sign a message with a private key. For hash-and-sign algorithms, * this includes the hashing step. * * \note The signature of this function is that of a PSA driver * sign_message entry point. This function behaves as a sign_message * entry point as defined in the PSA driver interface specification for * transparent drivers. * * \note This function will call the driver for psa_sign_hash * and go through driver dispatch again. * * \param[in] attributes The attributes of the key to use for the * operation. * \param[in] key_buffer The buffer containing the key context. * \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes. * \param[in] alg A signature algorithm that is compatible with * the type of the key. * \param[in] input The input message to sign. * \param[in] input_length Size of the \p input buffer in bytes. * \param[out] signature Buffer where the signature is to be written. * \param[in] signature_size Size of the \p signature buffer in bytes. * \param[out] signature_length On success, the number of bytes * that make up the returned signature value. * * \retval #PSA_SUCCESS \emptydescription * \retval #PSA_ERROR_BUFFER_TOO_SMALL * The size of the \p signature buffer is too small. You can * determine a sufficient buffer size by calling * #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg) * where \c key_type and \c key_bits are the type and bit-size * respectively of the key. * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription */ psa_status_t psa_sign_message_builtin( const psa_key_attributes_t *attributes, const uint8_t *key_buffer, size_t key_buffer_size, psa_algorithm_t alg, const uint8_t *input, size_t input_length, uint8_t *signature, size_t signature_size, size_t *signature_length); /** Verify the signature of a message with a public key, using * a hash-and-sign verification algorithm. * * \note The signature of this function is that of a PSA driver * verify_message entry point. This function behaves as a verify_message * entry point as defined in the PSA driver interface specification for * transparent drivers. * * \note This function will call the driver for psa_verify_hash * and go through driver dispatch again. * * \param[in] attributes The attributes of the key to use for the * operation. * \param[in] key_buffer The buffer containing the key context. * \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes. * \param[in] alg A signature algorithm that is compatible with * the type of the key. * \param[in] input The message whose signature is to be verified. * \param[in] input_length Size of the \p input buffer in bytes. * \param[in] signature Buffer containing the signature to verify. * \param[in] signature_length Size of the \p signature buffer in bytes. * * \retval #PSA_SUCCESS * The signature is valid. * \retval #PSA_ERROR_INVALID_SIGNATURE * The calculation was performed successfully, but the passed * signature is not a valid signature. * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription */ psa_status_t psa_verify_message_builtin( const psa_key_attributes_t *attributes, const uint8_t *key_buffer, size_t key_buffer_size, psa_algorithm_t alg, const uint8_t *input, size_t input_length, const uint8_t *signature, size_t signature_length); /** Sign an already-calculated hash with a private key. * * \note The signature of this function is that of a PSA driver * sign_hash entry point. This function behaves as a sign_hash * entry point as defined in the PSA driver interface specification for * transparent drivers. * * \param[in] attributes The attributes of the key to use for the * operation. * \param[in] key_buffer The buffer containing the key context. * \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes. * \param[in] alg A signature algorithm that is compatible with * the type of the key. * \param[in] hash The hash or message to sign. * \param[in] hash_length Size of the \p hash buffer in bytes. * \param[out] signature Buffer where the signature is to be written. * \param[in] signature_size Size of the \p signature buffer in bytes. * \param[out] signature_length On success, the number of bytes * that make up the returned signature value. * * \retval #PSA_SUCCESS \emptydescription * \retval #PSA_ERROR_BUFFER_TOO_SMALL * The size of the \p signature buffer is too small. You can * determine a sufficient buffer size by calling * #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg) * where \c key_type and \c key_bits are the type and bit-size * respectively of the key. * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription */ psa_status_t psa_sign_hash_builtin( const psa_key_attributes_t *attributes, const uint8_t *key_buffer, size_t key_buffer_size, psa_algorithm_t alg, const uint8_t *hash, size_t hash_length, uint8_t *signature, size_t signature_size, size_t *signature_length); /** * \brief Verify the signature a hash or short message using a public key. * * \note The signature of this function is that of a PSA driver * verify_hash entry point. This function behaves as a verify_hash * entry point as defined in the PSA driver interface specification for * transparent drivers. * * \param[in] attributes The attributes of the key to use for the * operation. * \param[in] key_buffer The buffer containing the key context. * \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes. * \param[in] alg A signature algorithm that is compatible with * the type of the key. * \param[in] hash The hash or message whose signature is to be * verified. * \param[in] hash_length Size of the \p hash buffer in bytes. * \param[in] signature Buffer containing the signature to verify. * \param[in] signature_length Size of the \p signature buffer in bytes. * * \retval #PSA_SUCCESS * The signature is valid. * \retval #PSA_ERROR_INVALID_SIGNATURE * The calculation was performed successfully, but the passed * signature is not a valid signature. * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription */ psa_status_t psa_verify_hash_builtin( const psa_key_attributes_t *attributes, const uint8_t *key_buffer, size_t key_buffer_size, psa_algorithm_t alg, const uint8_t *hash, size_t hash_length, const uint8_t *signature, size_t signature_length); /** * \brief Validate the key bit size for unstructured keys. * * \note Check that the bit size is acceptable for a given key type for * unstructured keys. * * \param[in] type The key type * \param[in] bits The number of bits of the key * * \retval #PSA_SUCCESS * The key type and size are valid. * \retval #PSA_ERROR_INVALID_ARGUMENT * The size in bits of the key is not valid. * \retval #PSA_ERROR_NOT_SUPPORTED * The type and/or the size in bits of the key or the combination of * the two is not supported. */ psa_status_t psa_validate_unstructured_key_bit_size(psa_key_type_t type, size_t bits); /** Perform a key agreement and return the raw shared secret, using built-in raw key agreement functions. * * \note The signature of this function is that of a PSA driver * key_agreement entry point. This function behaves as a key_agreement * entry point as defined in the PSA driver interface specification for * transparent drivers. * * \param[in] attributes The attributes of the key to use for the * operation. * \param[in] key_buffer The buffer containing the private key * context. * \param[in] key_buffer_size Size of the \p key_buffer buffer in * bytes. * \param[in] alg A key agreement algorithm that is * compatible with the type of the key. * \param[in] peer_key The buffer containing the key context * of the peer's public key. * \param[in] peer_key_length Size of the \p peer_key buffer in * bytes. * \param[out] shared_secret The buffer to which the shared secret * is to be written. * \param[in] shared_secret_size Size of the \p shared_secret buffer in * bytes. * \param[out] shared_secret_length On success, the number of bytes that make * up the returned shared secret. * \retval #PSA_SUCCESS * Success. Shared secret successfully calculated. * \retval #PSA_ERROR_INVALID_HANDLE \emptydescription * \retval #PSA_ERROR_NOT_PERMITTED \emptydescription * \retval #PSA_ERROR_INVALID_ARGUMENT * \p alg is not a key agreement algorithm, or * \p private_key is not compatible with \p alg, * or \p peer_key is not valid for \p alg or not compatible with * \p private_key. * \retval #PSA_ERROR_BUFFER_TOO_SMALL * \p shared_secret_size is too small * \retval #PSA_ERROR_NOT_SUPPORTED * \p alg is not a supported key agreement algorithm. * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription * \retval #PSA_ERROR_COMMUNICATION_FAILURE \emptydescription * \retval #PSA_ERROR_HARDWARE_FAILURE \emptydescription * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription * \retval #PSA_ERROR_STORAGE_FAILURE \emptydescription * \retval #PSA_ERROR_BAD_STATE \emptydescription */ psa_status_t psa_key_agreement_raw_builtin( const psa_key_attributes_t *attributes, const uint8_t *key_buffer, size_t key_buffer_size, psa_algorithm_t alg, const uint8_t *peer_key, size_t peer_key_length, uint8_t *shared_secret, size_t shared_secret_size, size_t *shared_secret_length); /** * \brief Set the maximum number of ops allowed to be executed by an * interruptible function in a single call. * * \note The signature of this function is that of a PSA driver * interruptible_set_max_ops entry point. This function behaves as an * interruptible_set_max_ops entry point as defined in the PSA driver * interface specification for transparent drivers. * * \param[in] max_ops The maximum number of ops to be executed in a * single call, this can be a number from 0 to * #PSA_INTERRUPTIBLE_MAX_OPS_UNLIMITED, where 0 * is obviously the least amount of work done per * call. */ void mbedtls_psa_interruptible_set_max_ops(uint32_t max_ops); /** * \brief Get the maximum number of ops allowed to be executed by an * interruptible function in a single call. * * \note The signature of this function is that of a PSA driver * interruptible_get_max_ops entry point. This function behaves as an * interruptible_get_max_ops entry point as defined in the PSA driver * interface specification for transparent drivers. * * \return Maximum number of ops allowed to be executed * by an interruptible function in a single call. */ uint32_t mbedtls_psa_interruptible_get_max_ops(void); /** * \brief Get the number of ops that a hash signing operation has taken for the * previous call. If no call or work has taken place, this will return * zero. * * \note The signature of this function is that of a PSA driver * sign_hash_get_num_ops entry point. This function behaves as an * sign_hash_get_num_ops entry point as defined in the PSA driver * interface specification for transparent drivers. * * \param operation The \c * mbedtls_psa_sign_hash_interruptible_operation_t * to use. This must be initialized first. * * \return Number of ops that were completed * in the last call to \c * mbedtls_psa_sign_hash_complete(). */ uint32_t mbedtls_psa_sign_hash_get_num_ops( const mbedtls_psa_sign_hash_interruptible_operation_t *operation); /** * \brief Get the number of ops that a hash verification operation has taken for * the previous call. If no call or work has taken place, this will * return zero. * * \note The signature of this function is that of a PSA driver * verify_hash_get_num_ops entry point. This function behaves as an * verify_hash_get_num_ops entry point as defined in the PSA driver * interface specification for transparent drivers. * * \param operation The \c * mbedtls_psa_verify_hash_interruptible_operation_t * to use. This must be initialized first. * * \return Number of ops that were completed * in the last call to \c * mbedtls_psa_verify_hash_complete(). */ uint32_t mbedtls_psa_verify_hash_get_num_ops( const mbedtls_psa_verify_hash_interruptible_operation_t *operation); /** * \brief Start signing a hash or short message with a private key, in an * interruptible manner. * * \note The signature of this function is that of a PSA driver * sign_hash_start entry point. This function behaves as a * sign_hash_start entry point as defined in the PSA driver interface * specification for transparent drivers. * * \param[in] operation The \c * mbedtls_psa_sign_hash_interruptible_operation_t * to use. This must be initialized first. * \param[in] attributes The attributes of the key to use for the * operation. * \param[in] key_buffer The buffer containing the key context. * \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes. * \param[in] alg A signature algorithm that is compatible with * the type of the key. * \param[in] hash The hash or message to sign. * \param hash_length Size of the \p hash buffer in bytes. * * \retval #PSA_SUCCESS * The operation started successfully - call \c psa_sign_hash_complete() * with the same context to complete the operation * \retval #PSA_ERROR_INVALID_ARGUMENT * An unsupported, incorrectly formatted or incorrect type of key was * used. * \retval #PSA_ERROR_NOT_SUPPORTED Either no internal interruptible operations * are currently supported, or the key type is currently unsupported. * \retval #PSA_ERROR_INSUFFICIENT_MEMORY * There was insufficient memory to load the key representation. */ psa_status_t mbedtls_psa_sign_hash_start( mbedtls_psa_sign_hash_interruptible_operation_t *operation, const psa_key_attributes_t *attributes, const uint8_t *key_buffer, size_t key_buffer_size, psa_algorithm_t alg, const uint8_t *hash, size_t hash_length); /** * \brief Continue and eventually complete the action of signing a hash or * short message with a private key, in an interruptible manner. * * \note The signature of this function is that of a PSA driver * sign_hash_complete entry point. This function behaves as a * sign_hash_complete entry point as defined in the PSA driver interface * specification for transparent drivers. * * \param[in] operation The \c * mbedtls_psa_sign_hash_interruptible_operation_t * to use. This must be initialized first. * * \param[out] signature Buffer where the signature is to be written. * \param signature_size Size of the \p signature buffer in bytes. This * must be appropriate for the selected * algorithm and key. * \param[out] signature_length On success, the number of bytes that make up * the returned signature value. * * \retval #PSA_SUCCESS * Operation completed successfully * * \retval #PSA_OPERATION_INCOMPLETE * Operation was interrupted due to the setting of \c * psa_interruptible_set_max_ops(), there is still work to be done, * please call this function again with the same operation object. * * \retval #PSA_ERROR_BUFFER_TOO_SMALL * The size of the \p signature buffer is too small. You can * determine a sufficient buffer size by calling * #PSA_SIGN_OUTPUT_SIZE(\c key_type, \c key_bits, \p alg) * where \c key_type and \c key_bits are the type and bit-size * respectively of \p key. * * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription * \retval #PSA_ERROR_CORRUPTION_DETECTED \emptydescription * \retval #PSA_ERROR_INSUFFICIENT_ENTROPY \emptydescription */ psa_status_t mbedtls_psa_sign_hash_complete( mbedtls_psa_sign_hash_interruptible_operation_t *operation, uint8_t *signature, size_t signature_size, size_t *signature_length); /** * \brief Abort a sign hash operation. * * \note The signature of this function is that of a PSA driver sign_hash_abort * entry point. This function behaves as a sign_hash_abort entry point as * defined in the PSA driver interface specification for transparent * drivers. * * \param[in] operation The \c * mbedtls_psa_sign_hash_interruptible_operation_t * to abort. * * \retval #PSA_SUCCESS * The operation was aborted successfully. */ psa_status_t mbedtls_psa_sign_hash_abort( mbedtls_psa_sign_hash_interruptible_operation_t *operation); /** * \brief Start reading and verifying a hash or short message, in an * interruptible manner. * * \note The signature of this function is that of a PSA driver * verify_hash_start entry point. This function behaves as a * verify_hash_start entry point as defined in the PSA driver interface * specification for transparent drivers. * * \param[in] operation The \c * mbedtls_psa_verify_hash_interruptible_operation_t * to use. This must be initialized first. * \param[in] attributes The attributes of the key to use for the * operation. * \param[in] key_buffer The buffer containing the key context. * \param[in] key_buffer_size Size of the \p key_buffer buffer in bytes. * \param[in] alg A signature algorithm that is compatible with * the type of the key. * \param[in] hash The hash whose signature is to be verified. * \param hash_length Size of the \p hash buffer in bytes. * \param[in] signature Buffer containing the signature to verify. * \param signature_length Size of the \p signature buffer in bytes. * * \retval #PSA_SUCCESS * The operation started successfully - call \c psa_sign_hash_complete() * with the same context to complete the operation * \retval #PSA_ERROR_INVALID_ARGUMENT * An unsupported or incorrect type of key was used. * \retval #PSA_ERROR_NOT_SUPPORTED * Either no internal interruptible operations are currently supported, * or the key type is currently unsupported. * \retval #PSA_ERROR_INSUFFICIENT_MEMORY * There was insufficient memory either to load the key representation, * or to prepare the operation. */ psa_status_t mbedtls_psa_verify_hash_start( mbedtls_psa_verify_hash_interruptible_operation_t *operation, const psa_key_attributes_t *attributes, const uint8_t *key_buffer, size_t key_buffer_size, psa_algorithm_t alg, const uint8_t *hash, size_t hash_length, const uint8_t *signature, size_t signature_length); /** * \brief Continue and eventually complete the action of signing a hash or * short message with a private key, in an interruptible manner. * * \note The signature of this function is that of a PSA driver * sign_hash_complete entry point. This function behaves as a * sign_hash_complete entry point as defined in the PSA driver interface * specification for transparent drivers. * * \param[in] operation The \c * mbedtls_psa_sign_hash_interruptible_operation_t * to use. This must be initialized first. * * \retval #PSA_SUCCESS * Operation completed successfully, and the passed signature is valid. * * \retval #PSA_OPERATION_INCOMPLETE * Operation was interrupted due to the setting of \c * psa_interruptible_set_max_ops(), there is still work to be done, * please call this function again with the same operation object. * * \retval #PSA_ERROR_INVALID_SIGNATURE * The calculation was performed successfully, but the passed * signature is not a valid signature. * * \retval #PSA_ERROR_NOT_SUPPORTED \emptydescription * \retval #PSA_ERROR_INVALID_ARGUMENT \emptydescription * \retval #PSA_ERROR_INSUFFICIENT_MEMORY \emptydescription */ psa_status_t mbedtls_psa_verify_hash_complete( mbedtls_psa_verify_hash_interruptible_operation_t *operation); /** * \brief Abort a verify signed hash operation. * * \note The signature of this function is that of a PSA driver * verify_hash_abort entry point. This function behaves as a * verify_hash_abort entry point as defined in the PSA driver interface * specification for transparent drivers. * * \param[in] operation The \c * mbedtls_psa_verify_hash_interruptible_operation_t * to abort. * * \retval #PSA_SUCCESS * The operation was aborted successfully. */ psa_status_t mbedtls_psa_verify_hash_abort( mbedtls_psa_verify_hash_interruptible_operation_t *operation); #endif /* PSA_CRYPTO_CORE_H */