#! /usr/bin/env bash # all.sh # # Copyright The Mbed TLS Contributors # SPDX-License-Identifier: Apache-2.0 # # Licensed under the Apache License, Version 2.0 (the "License"); you may # not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. ################################################################ #### Documentation ################################################################ # Purpose # ------- # # To run all tests possible or available on the platform. # # Notes for users # --------------- # # Warning: the test is destructive. It includes various build modes and # configurations, and can and will arbitrarily change the current CMake # configuration. The following files must be committed into git: # * include/mbedtls/mbedtls_config.h # * Makefile, library/Makefile, programs/Makefile, tests/Makefile, # programs/fuzz/Makefile # After running this script, the CMake cache will be lost and CMake # will no longer be initialised. # # The script assumes the presence of a number of tools: # * Basic Unix tools (Windows users note: a Unix-style find must be before # the Windows find in the PATH) # * Perl # * GNU Make # * CMake # * GCC and Clang (recent enough for using ASan with gcc and MemSan with clang, or valgrind) # * G++ # * arm-gcc and mingw-gcc # * ArmCC 5 and ArmCC 6, unless invoked with --no-armcc # * OpenSSL and GnuTLS command line tools, recent enough for the # interoperability tests. If they don't support old features which we want # to test, then a legacy version of these tools must be present as well # (search for LEGACY below). # See the invocation of check_tools below for details. # # This script must be invoked from the toplevel directory of a git # working copy of Mbed TLS. # # The behavior on an error depends on whether --keep-going (alias -k) # is in effect. # * Without --keep-going: the script stops on the first error without # cleaning up. This lets you work in the configuration of the failing # component. # * With --keep-going: the script runs all requested components and # reports failures at the end. In particular the script always cleans # up on exit. # # Note that the output is not saved. You may want to run # script -c tests/scripts/all.sh # or # tests/scripts/all.sh >all.log 2>&1 # # Notes for maintainers # --------------------- # # The bulk of the code is organized into functions that follow one of the # following naming conventions: # * pre_XXX: things to do before running the tests, in order. # * component_XXX: independent components. They can be run in any order. # * component_check_XXX: quick tests that aren't worth parallelizing. # * component_build_XXX: build things but don't run them. # * component_test_XXX: build and test. # * support_XXX: if support_XXX exists and returns false then # component_XXX is not run by default. # * post_XXX: things to do after running the tests. # * other: miscellaneous support functions. # # Each component must start by invoking `msg` with a short informative message. # # Warning: due to the way bash detects errors, the failure of a command # inside 'if' or '!' is not detected. Use the 'not' function instead of '!'. # # Each component is executed in a separate shell process. The component # fails if any command in it returns a non-zero status. # # The framework performs some cleanup tasks after each component. This # means that components can assume that the working directory is in a # cleaned-up state, and don't need to perform the cleanup themselves. # * Run `make clean`. # * Restore `include/mbedtls/mbedtls_config.h` from a backup made before running # the component. # * Check out `Makefile`, `library/Makefile`, `programs/Makefile`, # `tests/Makefile` and `programs/fuzz/Makefile` from git. # This cleans up after an in-tree use of CMake. # # The tests are roughly in order from fastest to slowest. This doesn't # have to be exact, but in general you should add slower tests towards # the end and fast checks near the beginning. ################################################################ #### Initialization and command line parsing ################################################################ # Abort on errors (even on the left-hand side of a pipe). # Treat uninitialised variables as errors. set -e -o pipefail -u # Enable ksh/bash extended file matching patterns shopt -s extglob in_mbedtls_repo () { test -d include -a -d library -a -d programs -a -d tests } in_psa_crypto_repo () { test -d include -a -d core -a -d drivers -a -d programs -a -d tests } pre_check_environment () { if in_mbedtls_repo || in_psa_crypto_repo; then :; else echo "Must be run from Mbed TLS / psa-crypto root" >&2 exit 1 fi } pre_initialize_variables () { if in_mbedtls_repo; then CONFIG_H='include/mbedtls/mbedtls_config.h' else CONFIG_H='drivers/builtin/include/mbedtls/mbedtls_config.h' fi CRYPTO_CONFIG_H='include/psa/crypto_config.h' CONFIG_TEST_DRIVER_H='tests/include/test/drivers/config_test_driver.h' # Files that are clobbered by some jobs will be backed up. Use a different # suffix from auxiliary scripts so that all.sh and auxiliary scripts can # independently decide when to remove the backup file. backup_suffix='.all.bak' # Files clobbered by config.py files_to_back_up="$CONFIG_H $CRYPTO_CONFIG_H $CONFIG_TEST_DRIVER_H" if in_mbedtls_repo; then # Files clobbered by in-tree cmake files_to_back_up="$files_to_back_up Makefile library/Makefile programs/Makefile tests/Makefile programs/fuzz/Makefile" fi append_outcome=0 MEMORY=0 FORCE=0 QUIET=0 KEEP_GOING=0 # Seed value used with the --release-test option. # # See also RELEASE_SEED in basic-build-test.sh. Debugging is easier if # both values are kept in sync. If you change the value here because it # breaks some tests, you'll definitely want to change it in # basic-build-test.sh as well. RELEASE_SEED=1 : ${MBEDTLS_TEST_OUTCOME_FILE=} : ${MBEDTLS_TEST_PLATFORM="$(uname -s | tr -c \\n0-9A-Za-z _)-$(uname -m | tr -c \\n0-9A-Za-z _)"} export MBEDTLS_TEST_OUTCOME_FILE export MBEDTLS_TEST_PLATFORM # Default commands, can be overridden by the environment : ${OPENSSL:="openssl"} : ${OPENSSL_LEGACY:="$OPENSSL"} : ${OPENSSL_NEXT:="$OPENSSL"} : ${GNUTLS_CLI:="gnutls-cli"} : ${GNUTLS_SERV:="gnutls-serv"} : ${GNUTLS_LEGACY_CLI:="$GNUTLS_CLI"} : ${GNUTLS_LEGACY_SERV:="$GNUTLS_SERV"} : ${OUT_OF_SOURCE_DIR:=./mbedtls_out_of_source_build} : ${ARMC5_BIN_DIR:=/usr/bin} : ${ARMC6_BIN_DIR:=/usr/bin} : ${ARM_NONE_EABI_GCC_PREFIX:=arm-none-eabi-} : ${ARM_LINUX_GNUEABI_GCC_PREFIX:=arm-linux-gnueabi-} : ${CLANG_LATEST:="clang-latest"} : ${CLANG_EARLIEST:="clang-earliest"} : ${GCC_LATEST:="gcc-latest"} : ${GCC_EARLIEST:="gcc-earliest"} # if MAKEFLAGS is not set add the -j option to speed up invocations of make if [ -z "${MAKEFLAGS+set}" ]; then export MAKEFLAGS="-j$(all_sh_nproc)" fi # Include more verbose output for failing tests run by CMake or make export CTEST_OUTPUT_ON_FAILURE=1 # CFLAGS and LDFLAGS for Asan builds that don't use CMake # default to -O2, use -Ox _after_ this if you want another level ASAN_CFLAGS='-O2 -Werror -fsanitize=address,undefined -fno-sanitize-recover=all' # Platform tests have an allocation that returns null export ASAN_OPTIONS="allocator_may_return_null=1" export MSAN_OPTIONS="allocator_may_return_null=1" # Gather the list of available components. These are the functions # defined in this script whose name starts with "component_". ALL_COMPONENTS=$(compgen -A function component_ | sed 's/component_//') # Exclude components that are not supported on this platform. SUPPORTED_COMPONENTS= for component in $ALL_COMPONENTS; do case $(type "support_$component" 2>&1) in *' function'*) if ! support_$component; then continue; fi;; esac SUPPORTED_COMPONENTS="$SUPPORTED_COMPONENTS $component" done } # Test whether the component $1 is included in the command line patterns. is_component_included() { # Temporarily disable wildcard expansion so that $COMMAND_LINE_COMPONENTS # only does word splitting. set -f for pattern in $COMMAND_LINE_COMPONENTS; do set +f case ${1#component_} in $pattern) return 0;; esac done set +f return 1 } usage() { cat < Prefix for a cross-compiler for arm-none-eabi (default: "${ARM_NONE_EABI_GCC_PREFIX}") --arm-linux-gnueabi-gcc-prefix= Prefix for a cross-compiler for arm-linux-gnueabi (default: "${ARM_LINUX_GNUEABI_GCC_PREFIX}") --armcc Run ARM Compiler builds (on by default). --restore First clean up the build tree, restoring backed up files. Do not run any components unless they are explicitly specified. --error-test Error test mode: run a failing function in addition to any specified component. May be repeated. --except Exclude the COMPONENTs listed on the command line, instead of running only those. --no-append-outcome Write a new outcome file and analyze it (default). --no-armcc Skip ARM Compiler builds. --no-force Refuse to overwrite modified files (default). --no-keep-going Stop at the first error (default). --no-memory No additional memory tests (default). --no-quiet Print full output from components. --out-of-source-dir= Directory used for CMake out-of-source build tests. --outcome-file= File where test outcomes are written (not done if empty; default: \$MBEDTLS_TEST_OUTCOME_FILE). --random-seed Use a random seed value for randomized tests (default). -r|--release-test Run this script in release mode. This fixes the seed value to ${RELEASE_SEED}. -s|--seed Integer seed value to use for this test run. Tool path options: --armc5-bin-dir= ARM Compiler 5 bin directory. --armc6-bin-dir= ARM Compiler 6 bin directory. --clang-earliest= Earliest version of clang available --clang-latest= Latest version of clang available --gcc-earliest= Earliest version of GCC available --gcc-latest= Latest version of GCC available --gnutls-cli= GnuTLS client executable to use for most tests. --gnutls-serv= GnuTLS server executable to use for most tests. --gnutls-legacy-cli= GnuTLS client executable to use for legacy tests. --gnutls-legacy-serv= GnuTLS server executable to use for legacy tests. --openssl= OpenSSL executable to use for most tests. --openssl-legacy= OpenSSL executable to use for legacy tests.. --openssl-next= OpenSSL executable to use for recent things like ARIA EOF } # Cleanup before/after running a component. # Remove built files as well as the cmake cache/config. # Does not remove generated source files. cleanup() { if in_mbedtls_repo; then command make clean fi # Remove CMake artefacts find . -name .git -prune -o \ -iname CMakeFiles -exec rm -rf {} \+ -o \ \( -iname cmake_install.cmake -o \ -iname CTestTestfile.cmake -o \ -iname CMakeCache.txt -o \ -path './cmake/*.cmake' \) -exec rm -f {} \+ # Recover files overwritten by in-tree CMake builds rm -f include/Makefile include/mbedtls/Makefile programs/!(fuzz)/Makefile # Remove any artifacts from the component_test_cmake_as_subdirectory test. rm -rf programs/test/cmake_subproject/build rm -f programs/test/cmake_subproject/Makefile rm -f programs/test/cmake_subproject/cmake_subproject # Remove any artifacts from the component_test_cmake_as_package test. rm -rf programs/test/cmake_package/build rm -f programs/test/cmake_package/Makefile rm -f programs/test/cmake_package/cmake_package # Remove any artifacts from the component_test_cmake_as_installed_package test. rm -rf programs/test/cmake_package_install/build rm -f programs/test/cmake_package_install/Makefile rm -f programs/test/cmake_package_install/cmake_package_install # Restore files that may have been clobbered by the job for x in $files_to_back_up; do if [[ -e "$x$backup_suffix" ]]; then cp -p "$x$backup_suffix" "$x" fi done } # Final cleanup when this script exits (except when exiting on a failure # in non-keep-going mode). final_cleanup () { cleanup for x in $files_to_back_up; do rm -f "$x$backup_suffix" done } # Executed on exit. May be redefined depending on command line options. final_report () { : } fatal_signal () { final_cleanup final_report $1 trap - $1 kill -$1 $$ } trap 'fatal_signal HUP' HUP trap 'fatal_signal INT' INT trap 'fatal_signal TERM' TERM # Number of processors on this machine. Used as the default setting # for parallel make. all_sh_nproc () { { nproc || # Linux sysctl -n hw.ncpuonline || # NetBSD, OpenBSD sysctl -n hw.ncpu || # FreeBSD echo 1 } 2>/dev/null } msg() { if [ -n "${current_component:-}" ]; then current_section="${current_component#component_}: $1" else current_section="$1" fi if [ $QUIET -eq 1 ]; then return fi echo "" echo "******************************************************************" echo "* $current_section " printf "* "; date echo "******************************************************************" } armc6_build_test() { FLAGS="$1" msg "build: ARM Compiler 6 ($FLAGS)" ARM_TOOL_VARIANT="ult" CC="$ARMC6_CC" AR="$ARMC6_AR" CFLAGS="$FLAGS" \ WARNING_CFLAGS='-Werror -xc -std=c99' make lib msg "size: ARM Compiler 6 ($FLAGS)" "$ARMC6_FROMELF" -z library/*.o make clean } err_msg() { echo "$1" >&2 } check_tools() { for TOOL in "$@"; do if ! `type "$TOOL" >/dev/null 2>&1`; then err_msg "$TOOL not found!" exit 1 fi done } pre_parse_command_line_for_dirs () { # Make an early pass through the options given, so we can set directories # for Arm compilers, before SUPPORTED_COMPONENTS is determined. while [ $# -gt 0 ]; do case "$1" in --armc5-bin-dir) shift; ARMC5_BIN_DIR="$1";; --armc6-bin-dir) shift; ARMC6_BIN_DIR="$1";; esac shift done } pre_parse_command_line () { COMMAND_LINE_COMPONENTS= all_except=0 error_test=0 restore_first=0 no_armcc= # Note that legacy options are ignored instead of being omitted from this # list of options, so invocations that worked with previous version of # all.sh will still run and work properly. while [ $# -gt 0 ]; do case "$1" in --append-outcome) append_outcome=1;; --arm-none-eabi-gcc-prefix) shift; ARM_NONE_EABI_GCC_PREFIX="$1";; --arm-linux-gnueabi-gcc-prefix) shift; ARM_LINUX_GNUEABI_GCC_PREFIX="$1";; --armcc) no_armcc=;; --armc5-bin-dir) shift; ;; # assignment to ARMC5_BIN_DIR done in pre_parse_command_line_for_dirs --armc6-bin-dir) shift; ;; # assignment to ARMC6_BIN_DIR done in pre_parse_command_line_for_dirs --clang-earliest) shift; CLANG_EARLIEST="$1";; --clang-latest) shift; CLANG_LATEST="$1";; --error-test) error_test=$((error_test + 1));; --except) all_except=1;; --force|-f) FORCE=1;; --gcc-earliest) shift; GCC_EARLIEST="$1";; --gcc-latest) shift; GCC_LATEST="$1";; --gnutls-cli) shift; GNUTLS_CLI="$1";; --gnutls-legacy-cli) shift; GNUTLS_LEGACY_CLI="$1";; --gnutls-legacy-serv) shift; GNUTLS_LEGACY_SERV="$1";; --gnutls-serv) shift; GNUTLS_SERV="$1";; --help|-h) usage; exit;; --keep-going|-k) KEEP_GOING=1;; --list-all-components) printf '%s\n' $ALL_COMPONENTS; exit;; --list-components) printf '%s\n' $SUPPORTED_COMPONENTS; exit;; --memory|-m) MEMORY=1;; --no-append-outcome) append_outcome=0;; --no-armcc) no_armcc=1;; --no-force) FORCE=0;; --no-keep-going) KEEP_GOING=0;; --no-memory) MEMORY=0;; --no-quiet) QUIET=0;; --openssl) shift; OPENSSL="$1";; --openssl-legacy) shift; OPENSSL_LEGACY="$1";; --openssl-next) shift; OPENSSL_NEXT="$1";; --outcome-file) shift; MBEDTLS_TEST_OUTCOME_FILE="$1";; --out-of-source-dir) shift; OUT_OF_SOURCE_DIR="$1";; --quiet|-q) QUIET=1;; --random-seed) unset SEED;; --release-test|-r) SEED=$RELEASE_SEED;; --restore) restore_first=1;; --seed|-s) shift; SEED="$1";; -*) echo >&2 "Unknown option: $1" echo >&2 "Run $0 --help for usage." exit 120 ;; *) COMMAND_LINE_COMPONENTS="$COMMAND_LINE_COMPONENTS $1";; esac shift done # With no list of components, run everything. if [ -z "$COMMAND_LINE_COMPONENTS" ] && [ $restore_first -eq 0 ]; then all_except=1 fi # --no-armcc is a legacy option. The modern way is --except '*_armcc*'. # Ignore it if components are listed explicitly on the command line. if [ -n "$no_armcc" ] && [ $all_except -eq 1 ]; then COMMAND_LINE_COMPONENTS="$COMMAND_LINE_COMPONENTS *_armcc*" fi # Error out if an explicitly requested component doesn't exist. if [ $all_except -eq 0 ]; then unsupported=0 # Temporarily disable wildcard expansion so that $COMMAND_LINE_COMPONENTS # only does word splitting. set -f for component in $COMMAND_LINE_COMPONENTS; do set +f # If the requested name includes a wildcard character, don't # check it. Accept wildcard patterns that don't match anything. case $component in *[*?\[]*) continue;; esac case " $SUPPORTED_COMPONENTS " in *" $component "*) :;; *) echo >&2 "Component $component was explicitly requested, but is not known or not supported." unsupported=$((unsupported + 1));; esac done set +f if [ $unsupported -ne 0 ]; then exit 2 fi fi # Build the list of components to run. RUN_COMPONENTS= for component in $SUPPORTED_COMPONENTS; do if is_component_included "$component"; [ $? -eq $all_except ]; then RUN_COMPONENTS="$RUN_COMPONENTS $component" fi done unset all_except unset no_armcc } pre_check_git () { if [ $FORCE -eq 1 ]; then rm -rf "$OUT_OF_SOURCE_DIR" git checkout-index -f -q $CONFIG_H cleanup else if [ -d "$OUT_OF_SOURCE_DIR" ]; then echo "Warning - there is an existing directory at '$OUT_OF_SOURCE_DIR'" >&2 echo "You can either delete this directory manually, or force the test by rerunning" echo "the script as: $0 --force --out-of-source-dir $OUT_OF_SOURCE_DIR" exit 1 fi if ! git diff --quiet "$CONFIG_H"; then err_msg "Warning - the configuration file '$CONFIG_H' has been edited. " echo "You can either delete or preserve your work, or force the test by rerunning the" echo "script as: $0 --force" exit 1 fi fi } pre_restore_files () { # If the makefiles have been generated by a framework such as cmake, # restore them from git. If the makefiles look like modifications from # the ones checked into git, take care not to modify them. Whatever # this function leaves behind is what the script will restore before # each component. case "$(head -n1 Makefile)" in *[Gg]enerated*) git update-index --no-skip-worktree Makefile library/Makefile programs/Makefile tests/Makefile programs/fuzz/Makefile git checkout -- Makefile library/Makefile programs/Makefile tests/Makefile programs/fuzz/Makefile ;; esac } pre_back_up () { for x in $files_to_back_up; do cp -p "$x" "$x$backup_suffix" done } pre_setup_keep_going () { failure_count=0 # Number of failed components last_failure_status=0 # Last failure status in this component # See err_trap previous_failure_status=0 previous_failed_command= previous_failure_funcall_depth=0 unset report_failed_command start_red= end_color= if [ -t 1 ]; then case "${TERM:-}" in *color*|cygwin|linux|rxvt*|screen|[Eex]term*) start_red=$(printf '\033[31m') end_color=$(printf '\033[0m') ;; esac fi # Keep a summary of failures in a file. We'll print it out at the end. failure_summary_file=$PWD/all-sh-failures-$$.log : >"$failure_summary_file" # Whether it makes sense to keep a component going after the specified # command fails (test command) or not (configure or build). # This function normally receives the failing simple command # ($BASH_COMMAND) as an argument, but if $report_failed_command is set, # this is passed instead. # This doesn't have to be 100% accurate: all failures are recorded anyway. # False positives result in running things that can't be expected to # work. False negatives result in things not running after something else # failed even though they might have given useful feedback. can_keep_going_after_failure () { case "$1" in "msg "*) false;; "cd "*) false;; *make*[\ /]tests*) false;; # make tests, make CFLAGS=-I../tests, ... *test*) true;; # make test, tests/stuff, env V=v tests/stuff, ... *make*check*) true;; "grep "*) true;; "[ "*) true;; "! "*) true;; *) false;; esac } # This function runs if there is any error in a component. # It must either exit with a nonzero status, or set # last_failure_status to a nonzero value. err_trap () { # Save $? (status of the failing command). This must be the very # first thing, before $? is overridden. last_failure_status=$? failed_command=${report_failed_command-$BASH_COMMAND} if [[ $last_failure_status -eq $previous_failure_status && "$failed_command" == "$previous_failed_command" && ${#FUNCNAME[@]} == $((previous_failure_funcall_depth - 1)) ]] then # The same command failed twice in a row, but this time one level # less deep in the function call stack. This happens when the last # command of a function returns a nonzero status, and the function # returns that same status. Ignore the second failure. previous_failure_funcall_depth=${#FUNCNAME[@]} return fi previous_failure_status=$last_failure_status previous_failed_command=$failed_command previous_failure_funcall_depth=${#FUNCNAME[@]} text="$current_section: $failed_command -> $last_failure_status" echo "${start_red}^^^^$text^^^^${end_color}" >&2 echo "$text" >>"$failure_summary_file" # If the command is fatal (configure or build command), stop this # component. Otherwise (test command) keep the component running # (run more tests from the same build). if ! can_keep_going_after_failure "$failed_command"; then exit $last_failure_status fi } final_report () { if [ $failure_count -gt 0 ]; then echo echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" echo "${start_red}FAILED: $failure_count components${end_color}" cat "$failure_summary_file" echo "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" elif [ -z "${1-}" ]; then echo "SUCCESS :)" fi if [ -n "${1-}" ]; then echo "Killed by SIG$1." fi rm -f "$failure_summary_file" if [ $failure_count -gt 0 ]; then exit 1 fi } } # record_status() and if_build_succeeded() are kept temporarily for backward # compatibility. Don't use them in new components. record_status () { "$@" } if_build_succeeded () { "$@" } # '! true' does not trigger the ERR trap. Arrange to trigger it, with # a reasonably informative error message (not just "$@"). not () { if "$@"; then report_failed_command="! $*" false unset report_failed_command fi } pre_prepare_outcome_file () { case "$MBEDTLS_TEST_OUTCOME_FILE" in [!/]*) MBEDTLS_TEST_OUTCOME_FILE="$PWD/$MBEDTLS_TEST_OUTCOME_FILE";; esac if [ -n "$MBEDTLS_TEST_OUTCOME_FILE" ] && [ "$append_outcome" -eq 0 ]; then rm -f "$MBEDTLS_TEST_OUTCOME_FILE" fi } pre_print_configuration () { if [ $QUIET -eq 1 ]; then return fi msg "info: $0 configuration" echo "MEMORY: $MEMORY" echo "FORCE: $FORCE" echo "MBEDTLS_TEST_OUTCOME_FILE: ${MBEDTLS_TEST_OUTCOME_FILE:-(none)}" echo "SEED: ${SEED-"UNSET"}" echo echo "OPENSSL: $OPENSSL" echo "OPENSSL_LEGACY: $OPENSSL_LEGACY" echo "OPENSSL_NEXT: $OPENSSL_NEXT" echo "GNUTLS_CLI: $GNUTLS_CLI" echo "GNUTLS_SERV: $GNUTLS_SERV" echo "GNUTLS_LEGACY_CLI: $GNUTLS_LEGACY_CLI" echo "GNUTLS_LEGACY_SERV: $GNUTLS_LEGACY_SERV" echo "ARMC5_BIN_DIR: $ARMC5_BIN_DIR" echo "ARMC6_BIN_DIR: $ARMC6_BIN_DIR" } # Make sure the tools we need are available. pre_check_tools () { # Build the list of variables to pass to output_env.sh. set env case " $RUN_COMPONENTS " in # Require OpenSSL and GnuTLS if running any tests (as opposed to # only doing builds). Not all tests run OpenSSL and GnuTLS, but this # is a good enough approximation in practice. *" test_"*) # To avoid setting OpenSSL and GnuTLS for each call to compat.sh # and ssl-opt.sh, we just export the variables they require. export OPENSSL="$OPENSSL" export GNUTLS_CLI="$GNUTLS_CLI" export GNUTLS_SERV="$GNUTLS_SERV" # Avoid passing --seed flag in every call to ssl-opt.sh if [ -n "${SEED-}" ]; then export SEED fi set "$@" OPENSSL="$OPENSSL" OPENSSL_LEGACY="$OPENSSL_LEGACY" set "$@" GNUTLS_CLI="$GNUTLS_CLI" GNUTLS_SERV="$GNUTLS_SERV" set "$@" GNUTLS_LEGACY_CLI="$GNUTLS_LEGACY_CLI" set "$@" GNUTLS_LEGACY_SERV="$GNUTLS_LEGACY_SERV" check_tools "$OPENSSL" "$OPENSSL_LEGACY" "$OPENSSL_NEXT" \ "$GNUTLS_CLI" "$GNUTLS_SERV" \ "$GNUTLS_LEGACY_CLI" "$GNUTLS_LEGACY_SERV" ;; esac case " $RUN_COMPONENTS " in *_doxygen[_\ ]*) check_tools "doxygen" "dot";; esac case " $RUN_COMPONENTS " in *_arm_none_eabi_gcc[_\ ]*) check_tools "${ARM_NONE_EABI_GCC_PREFIX}gcc";; esac case " $RUN_COMPONENTS " in *_mingw[_\ ]*) check_tools "i686-w64-mingw32-gcc";; esac case " $RUN_COMPONENTS " in *" test_zeroize "*) check_tools "gdb";; esac case " $RUN_COMPONENTS " in *_armcc*) ARMC5_CC="$ARMC5_BIN_DIR/armcc" ARMC5_AR="$ARMC5_BIN_DIR/armar" ARMC5_FROMELF="$ARMC5_BIN_DIR/fromelf" ARMC6_CC="$ARMC6_BIN_DIR/armclang" ARMC6_AR="$ARMC6_BIN_DIR/armar" ARMC6_FROMELF="$ARMC6_BIN_DIR/fromelf" check_tools "$ARMC5_CC" "$ARMC5_AR" "$ARMC5_FROMELF" \ "$ARMC6_CC" "$ARMC6_AR" "$ARMC6_FROMELF";; esac # past this point, no call to check_tool, only printing output if [ $QUIET -eq 1 ]; then return fi msg "info: output_env.sh" case $RUN_COMPONENTS in *_armcc*) set "$@" ARMC5_CC="$ARMC5_CC" ARMC6_CC="$ARMC6_CC" RUN_ARMCC=1;; *) set "$@" RUN_ARMCC=0;; esac "$@" scripts/output_env.sh } pre_generate_files() { # since make doesn't have proper dependencies, remove any possibly outdate # file that might be around before generating fresh ones make neat if [ $QUIET -eq 1 ]; then make generated_files >/dev/null else make generated_files fi } ################################################################ #### Helpers for components using libtestdriver1 ################################################################ # How to use libtestdriver1 # ------------------------- # # 1. Define the list algorithms and key types to accelerate, # designated the same way as PSA_WANT_ macros but without PSA_WANT_. # Examples: # - loc_accel_list="ALG_JPAKE" # - loc_accel_list="ALG_FFDH KEY_TYPE_DH_KEY_PAIR KEY_TYPE_DH_PUBLIC_KEY" # 2. Make configurations changes for the driver and/or main libraries. # 2a. Call helper_libtestdriver1_adjust_config , where the argument # can be either "default" to start with the default config, or a name # supported by scripts/config.py (for example, "full"). This selects # the base to use, and makes common adjustments. # 2b. If desired, adjust the PSA_WANT symbols in psa/crypto_config.h. # These changes affect both the driver and the main libraries. # (Note: they need to have the same set of PSA_WANT symbols, as that # determines the ABI between them.) # 2c. Adjust MBEDTLS_ symbols in mbedtls_config.h. This only affects the # main libraries. Typically, you want to disable the module(s) that are # being accelerated. You may need to also disable modules that depend # on them or options that are not supported with drivers. # 2d. On top of psa/crypto_config.h, the driver library uses its own config # file: tests/include/test/drivers/config_test_driver.h. You usually # don't need to edit it: using loc_extra_list (see below) is preferred. # However, when there's no PSA symbol for what you want to enable, # calling scripts/config.py on this file remains the only option. # 3. Build the driver library, then the main libraries, test, and programs. # 3a. Call helper_libtestdriver1_make_drivers "$loc_accel_list". You may # need to enable more algorithms here, typically hash algorithms when # accelerating some signature algorithms (ECDSA, RSAv2). This is done # by passing a 2nd argument listing the extra algorithms. # Example: # loc_extra_list="ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512" # helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list" # 4b. Call helper_libtestdriver1_make_main "$loc_accel_list". Any # additional arguments will be passed to make: this can be useful if # you don't want to build everything when iterating during development. # Example: # helper_libtestdriver1_make_main "$loc_accel_list" -C tests test_suite_foo # 4. Run the tests you want. # Adjust the configuration - for both libtestdriver1 and main library, # as they should have the same PSA_WANT macros. helper_libtestdriver1_adjust_config() { BASE_CONFIG=$1 # Select the base configuration if [ "$BASE_CONFIG" != "default" ]; then scripts/config.py "$BASE_CONFIG" fi # Enable PSA-based config (necessary to use drivers) scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG # Disable ALG_STREAM_CIPHER and ALG_ECB_NO_PADDING to avoid having # partial support for cipher operations in the driver test library. scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_STREAM_CIPHER scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_ECB_NO_PADDING # Dynamic secure element support is a deprecated feature and needs to be disabled here. # This is done to have the same form of psa_key_attributes_s for libdriver and library. scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C } # Build the drivers library libtestdriver1.a (with ASan). # # Parameters: # 1. a space-separated list of things to accelerate; # 2. optional: a space-separate list of things to also support. # Here "things" are PSA_WANT_ symbols but with PSA_WANT_ removed. helper_libtestdriver1_make_drivers() { loc_accel_flags=$( echo "$1 ${2-}" | sed 's/[^ ]* */-DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_&/g' ) make -C tests libtestdriver1.a CFLAGS=" $ASAN_CFLAGS $loc_accel_flags" LDFLAGS="$ASAN_CFLAGS" } # Build the main libraries, programs and tests, # linking to the drivers library (with ASan). # # Parameters: # 1. a space-separated list of things to accelerate; # *. remaining arguments if any are passed directly to make # (examples: lib, -C tests test_suite_xxx, etc.) # Here "things" are PSA_WANT_ symbols but with PSA_WANT_ removed. helper_libtestdriver1_make_main() { loc_accel_list=$1 shift # we need flags both with and without the LIBTESTDRIVER1_ prefix loc_accel_flags=$( echo "$loc_accel_list" | sed 's/[^ ]* */-DLIBTESTDRIVER1_MBEDTLS_PSA_ACCEL_&/g' ) loc_accel_flags="$loc_accel_flags $( echo "$loc_accel_list" | sed 's/[^ ]* */-DMBEDTLS_PSA_ACCEL_&/g' )" make CFLAGS="$ASAN_CFLAGS -I../tests/include -I../tests -I../../tests -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_TEST_LIBTESTDRIVER1 $loc_accel_flags" LDFLAGS="-ltestdriver1 $ASAN_CFLAGS" "$@" } ################################################################ #### Basic checks ################################################################ # # Test Suites to be executed # # The test ordering tries to optimize for the following criteria: # 1. Catch possible problems early, by running first tests that run quickly # and/or are more likely to fail than others (eg I use Clang most of the # time, so start with a GCC build). # 2. Minimize total running time, by avoiding useless rebuilds # # Indicative running times are given for reference. component_check_recursion () { msg "Check: recursion.pl" # < 1s tests/scripts/recursion.pl library/*.c } component_check_generated_files () { msg "Check: check-generated-files, files generated with make" # 2s make generated_files tests/scripts/check-generated-files.sh msg "Check: check-generated-files -u, files present" # 2s tests/scripts/check-generated-files.sh -u # Check that the generated files are considered up to date. tests/scripts/check-generated-files.sh msg "Check: check-generated-files -u, files absent" # 2s command make neat tests/scripts/check-generated-files.sh -u # Check that the generated files are considered up to date. tests/scripts/check-generated-files.sh # This component ends with the generated files present in the source tree. # This is necessary for subsequent components! } component_check_doxy_blocks () { msg "Check: doxygen markup outside doxygen blocks" # < 1s tests/scripts/check-doxy-blocks.pl } component_check_files () { msg "Check: file sanity checks (permissions, encodings)" # < 1s tests/scripts/check_files.py } component_check_changelog () { msg "Check: changelog entries" # < 1s rm -f ChangeLog.new scripts/assemble_changelog.py -o ChangeLog.new if [ -e ChangeLog.new ]; then # Show the diff for information. It isn't an error if the diff is # non-empty. diff -u ChangeLog ChangeLog.new || true rm ChangeLog.new fi } component_check_names () { msg "Check: declared and exported names (builds the library)" # < 3s tests/scripts/check_names.py -v } component_check_test_cases () { msg "Check: test case descriptions" # < 1s if [ $QUIET -eq 1 ]; then opt='--quiet' else opt='' fi tests/scripts/check_test_cases.py -q $opt unset opt } component_check_doxygen_warnings () { msg "Check: doxygen warnings (builds the documentation)" # ~ 3s tests/scripts/doxygen.sh } ################################################################ #### Build and test many configurations and targets ################################################################ component_test_default_out_of_box () { msg "build: make, default config (out-of-box)" # ~1min make # Disable fancy stuff unset MBEDTLS_TEST_OUTCOME_FILE msg "test: main suites make, default config (out-of-box)" # ~10s make test msg "selftest: make, default config (out-of-box)" # ~10s programs/test/selftest } component_test_default_cmake_gcc_asan () { msg "build: cmake, gcc, ASan" # ~ 1 min 50s CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: main suites (inc. selftests) (ASan build)" # ~ 50s make test msg "test: selftest (ASan build)" # ~ 10s programs/test/selftest msg "test: ssl-opt.sh (ASan build)" # ~ 1 min tests/ssl-opt.sh msg "test: compat.sh (ASan build)" # ~ 6 min tests/compat.sh msg "test: context-info.sh (ASan build)" # ~ 15 sec tests/context-info.sh } component_test_default_cmake_gcc_asan_new_bignum () { msg "build: cmake, gcc, ASan" # ~ 1 min 50s scripts/config.py set MBEDTLS_ECP_WITH_MPI_UINT CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: main suites (inc. selftests) (ASan build)" # ~ 50s make test msg "test: selftest (ASan build)" # ~ 10s programs/test/selftest msg "test: ssl-opt.sh (ASan build)" # ~ 1 min tests/ssl-opt.sh msg "test: compat.sh (ASan build)" # ~ 6 min tests/compat.sh msg "test: context-info.sh (ASan build)" # ~ 15 sec tests/context-info.sh } component_test_full_cmake_gcc_asan () { msg "build: full config, cmake, gcc, ASan" scripts/config.py full CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: main suites (inc. selftests) (full config, ASan build)" make test msg "test: selftest (ASan build)" # ~ 10s programs/test/selftest msg "test: ssl-opt.sh (full config, ASan build)" tests/ssl-opt.sh msg "test: compat.sh (full config, ASan build)" tests/compat.sh msg "test: context-info.sh (full config, ASan build)" # ~ 15 sec tests/context-info.sh msg "test: check direct ECP dependencies in TLS and X.509" docs/architecture/psa-migration/syms.sh full # TODO: replace "mbedtls_ecp_curve" with "mbedtls_ecp" also for # "full-tls-external" once Issue6839 is completed not grep mbedtls_ecp_curve full-libmbedtls-external not grep mbedtls_ecp full-libmbedx509-external rm full-libmbedtls-external \ full-libmbedtls-modules \ full-libmbedx509-external \ full-libmbedx509-modules } component_test_full_cmake_gcc_asan_new_bignum () { msg "build: full config, cmake, gcc, ASan" scripts/config.py full scripts/config.py set MBEDTLS_ECP_WITH_MPI_UINT CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: main suites (inc. selftests) (full config, ASan build)" make test msg "test: selftest (ASan build)" # ~ 10s programs/test/selftest msg "test: ssl-opt.sh (full config, ASan build)" tests/ssl-opt.sh msg "test: compat.sh (full config, ASan build)" tests/compat.sh msg "test: context-info.sh (full config, ASan build)" # ~ 15 sec tests/context-info.sh msg "test: check direct ECP dependencies in TLS and X.509" docs/architecture/psa-migration/syms.sh full # TODO: replace "mbedtls_ecp_curve" with "mbedtls_ecp" also for # "full-tls-external" once Issue6839 is completed not grep mbedtls_ecp_curve full-libmbedtls-external not grep mbedtls_ecp full-libmbedx509-external rm full-libmbedtls-external \ full-libmbedtls-modules \ full-libmbedx509-external \ full-libmbedx509-modules } component_test_full_cmake_gcc_asan_new_bignum_test_hooks () { msg "build: full config, cmake, gcc, ASan" scripts/config.py full scripts/config.py set MBEDTLS_TEST_HOOKS scripts/config.py set MBEDTLS_ECP_WITH_MPI_UINT CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: main suites (inc. selftests) (full config, ASan build)" make test msg "test: selftest (ASan build)" # ~ 10s programs/test/selftest } component_test_psa_crypto_key_id_encodes_owner () { msg "build: full config + PSA_CRYPTO_KEY_ID_ENCODES_OWNER, cmake, gcc, ASan" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: full config - USE_PSA_CRYPTO + PSA_CRYPTO_KEY_ID_ENCODES_OWNER, cmake, gcc, ASan" make test } # check_renamed_symbols HEADER LIB # Check that if HEADER contains '#define MACRO ...' then MACRO is not a symbol # name is LIB. check_renamed_symbols () { ! nm "$2" | sed 's/.* //' | grep -x -F "$(sed -n 's/^ *# *define *\([A-Z_a-z][0-9A-Z_a-z]*\)..*/\1/p' "$1")" } component_build_psa_crypto_spm () { msg "build: full config + PSA_CRYPTO_KEY_ID_ENCODES_OWNER + PSA_CRYPTO_SPM, make, gcc" scripts/config.py full scripts/config.py unset MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS scripts/config.py set MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER scripts/config.py set MBEDTLS_PSA_CRYPTO_SPM # We can only compile, not link, since our test and sample programs # aren't equipped for the modified names used when MBEDTLS_PSA_CRYPTO_SPM # is active. make CC=gcc CFLAGS='-Werror -Wall -Wextra -I../tests/include/spe' lib # Check that if a symbol is renamed by crypto_spe.h, the non-renamed # version is not present. echo "Checking for renamed symbols in the library" check_renamed_symbols tests/include/spe/crypto_spe.h library/libmbedcrypto.a } component_test_psa_crypto_client () { msg "build: default config - PSA_CRYPTO_C + PSA_CRYPTO_CLIENT, make" scripts/config.py unset MBEDTLS_PSA_CRYPTO_C scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C scripts/config.py set MBEDTLS_PSA_CRYPTO_CLIENT scripts/config.py unset MBEDTLS_LMS_C scripts/config.py unset MBEDTLS_LMS_PRIVATE make msg "test: default config - PSA_CRYPTO_C + PSA_CRYPTO_CLIENT, make" make test } component_test_psa_crypto_rsa_no_genprime() { msg "build: default config minus MBEDTLS_GENPRIME" scripts/config.py unset MBEDTLS_GENPRIME make msg "test: default config minus MBEDTLS_GENPRIME" make test } component_test_ref_configs () { msg "test/build: ref-configs (ASan build)" # ~ 6 min 20s # test-ref-configs works by overwriting mbedtls_config.h; this makes cmake # want to re-generate generated files that depend on it, quite correctly. # However this doesn't work as the generation script expects a specific # format for mbedtls_config.h, which the other files don't follow. Also, # cmake can't know this, but re-generation is actually not necessary as # the generated files only depend on the list of available options, not # whether they're on or off. So, disable cmake's (over-sensitive here) # dependency resolution for generated files and just rely on them being # present (thanks to pre_generate_files) by turning GEN_FILES off. CC=gcc cmake -D GEN_FILES=Off -D CMAKE_BUILD_TYPE:String=Asan . tests/scripts/test-ref-configs.pl } component_test_no_renegotiation () { msg "build: Default + !MBEDTLS_SSL_RENEGOTIATION (ASan build)" # ~ 6 min scripts/config.py unset MBEDTLS_SSL_RENEGOTIATION CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: !MBEDTLS_SSL_RENEGOTIATION - main suites (inc. selftests) (ASan build)" # ~ 50s make test msg "test: !MBEDTLS_SSL_RENEGOTIATION - ssl-opt.sh (ASan build)" # ~ 6 min tests/ssl-opt.sh } component_test_no_pem_no_fs () { msg "build: Default + !MBEDTLS_PEM_PARSE_C + !MBEDTLS_FS_IO (ASan build)" scripts/config.py unset MBEDTLS_PEM_PARSE_C scripts/config.py unset MBEDTLS_FS_IO scripts/config.py unset MBEDTLS_PSA_ITS_FILE_C # requires a filesystem scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C # requires PSA ITS CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: !MBEDTLS_PEM_PARSE_C !MBEDTLS_FS_IO - main suites (inc. selftests) (ASan build)" # ~ 50s make test msg "test: !MBEDTLS_PEM_PARSE_C !MBEDTLS_FS_IO - ssl-opt.sh (ASan build)" # ~ 6 min tests/ssl-opt.sh } component_test_rsa_no_crt () { msg "build: Default + RSA_NO_CRT (ASan build)" # ~ 6 min scripts/config.py set MBEDTLS_RSA_NO_CRT CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: RSA_NO_CRT - main suites (inc. selftests) (ASan build)" # ~ 50s make test msg "test: RSA_NO_CRT - RSA-related part of ssl-opt.sh (ASan build)" # ~ 5s tests/ssl-opt.sh -f RSA msg "test: RSA_NO_CRT - RSA-related part of compat.sh (ASan build)" # ~ 3 min tests/compat.sh -t RSA msg "test: RSA_NO_CRT - RSA-related part of context-info.sh (ASan build)" # ~ 15 sec tests/context-info.sh } component_test_no_ctr_drbg_classic () { msg "build: Full minus CTR_DRBG, classic crypto in TLS" scripts/config.py full scripts/config.py unset MBEDTLS_CTR_DRBG_C scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: Full minus CTR_DRBG, classic crypto - main suites" make test # In this configuration, the TLS test programs use HMAC_DRBG. # The SSL tests are slow, so run a small subset, just enough to get # confidence that the SSL code copes with HMAC_DRBG. msg "test: Full minus CTR_DRBG, classic crypto - ssl-opt.sh (subset)" tests/ssl-opt.sh -f 'Default\|SSL async private.*delay=\|tickets enabled on server' msg "test: Full minus CTR_DRBG, classic crypto - compat.sh (subset)" tests/compat.sh -m tls12 -t 'ECDSA PSK' -V NO -p OpenSSL } component_test_no_ctr_drbg_use_psa () { msg "build: Full minus CTR_DRBG, PSA crypto in TLS" scripts/config.py full scripts/config.py unset MBEDTLS_CTR_DRBG_C scripts/config.py set MBEDTLS_USE_PSA_CRYPTO CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: Full minus CTR_DRBG, USE_PSA_CRYPTO - main suites" make test # In this configuration, the TLS test programs use HMAC_DRBG. # The SSL tests are slow, so run a small subset, just enough to get # confidence that the SSL code copes with HMAC_DRBG. msg "test: Full minus CTR_DRBG, USE_PSA_CRYPTO - ssl-opt.sh (subset)" tests/ssl-opt.sh -f 'Default\|SSL async private.*delay=\|tickets enabled on server' msg "test: Full minus CTR_DRBG, USE_PSA_CRYPTO - compat.sh (subset)" tests/compat.sh -m tls12 -t 'ECDSA PSK' -V NO -p OpenSSL } component_test_no_hmac_drbg_classic () { msg "build: Full minus HMAC_DRBG, classic crypto in TLS" scripts/config.py full scripts/config.py unset MBEDTLS_HMAC_DRBG_C scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: Full minus HMAC_DRBG, classic crypto - main suites" make test # Normally our ECDSA implementation uses deterministic ECDSA. But since # HMAC_DRBG is disabled in this configuration, randomized ECDSA is used # instead. # Test SSL with non-deterministic ECDSA. Only test features that # might be affected by how ECDSA signature is performed. msg "test: Full minus HMAC_DRBG, classic crypto - ssl-opt.sh (subset)" tests/ssl-opt.sh -f 'Default\|SSL async private: sign' # To save time, only test one protocol version, since this part of # the protocol is identical in (D)TLS up to 1.2. msg "test: Full minus HMAC_DRBG, classic crypto - compat.sh (ECDSA)" tests/compat.sh -m tls12 -t 'ECDSA' } component_test_no_hmac_drbg_use_psa () { msg "build: Full minus HMAC_DRBG, PSA crypto in TLS" scripts/config.py full scripts/config.py unset MBEDTLS_HMAC_DRBG_C scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG scripts/config.py set MBEDTLS_USE_PSA_CRYPTO CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: Full minus HMAC_DRBG, USE_PSA_CRYPTO - main suites" make test # Normally our ECDSA implementation uses deterministic ECDSA. But since # HMAC_DRBG is disabled in this configuration, randomized ECDSA is used # instead. # Test SSL with non-deterministic ECDSA. Only test features that # might be affected by how ECDSA signature is performed. msg "test: Full minus HMAC_DRBG, USE_PSA_CRYPTO - ssl-opt.sh (subset)" tests/ssl-opt.sh -f 'Default\|SSL async private: sign' # To save time, only test one protocol version, since this part of # the protocol is identical in (D)TLS up to 1.2. msg "test: Full minus HMAC_DRBG, USE_PSA_CRYPTO - compat.sh (ECDSA)" tests/compat.sh -m tls12 -t 'ECDSA' } component_test_psa_external_rng_no_drbg_classic () { msg "build: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, classic crypto in TLS" scripts/config.py full scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py set MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG scripts/config.py unset MBEDTLS_ENTROPY_C scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT scripts/config.py unset MBEDTLS_CTR_DRBG_C scripts/config.py unset MBEDTLS_HMAC_DRBG_C scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG # When MBEDTLS_USE_PSA_CRYPTO is disabled and there is no DRBG, # the SSL test programs don't have an RNG and can't work. Explicitly # make them use the PSA RNG with -DMBEDTLS_TEST_USE_PSA_CRYPTO_RNG. make CFLAGS="$ASAN_CFLAGS -O2 -DMBEDTLS_TEST_USE_PSA_CRYPTO_RNG" LDFLAGS="$ASAN_CFLAGS" msg "test: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, classic crypto - main suites" make test msg "test: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, classic crypto - ssl-opt.sh (subset)" tests/ssl-opt.sh -f 'Default' } component_test_psa_external_rng_no_drbg_use_psa () { msg "build: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, PSA crypto in TLS" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG scripts/config.py unset MBEDTLS_ENTROPY_C scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT scripts/config.py unset MBEDTLS_CTR_DRBG_C scripts/config.py unset MBEDTLS_HMAC_DRBG_C scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # requires HMAC_DRBG make CFLAGS="$ASAN_CFLAGS -O2" LDFLAGS="$ASAN_CFLAGS" msg "test: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, PSA crypto - main suites" make test msg "test: PSA_CRYPTO_EXTERNAL_RNG minus *_DRBG, PSA crypto - ssl-opt.sh (subset)" tests/ssl-opt.sh -f 'Default\|opaque' } component_test_psa_external_rng_use_psa_crypto () { msg "build: full + PSA_CRYPTO_EXTERNAL_RNG + USE_PSA_CRYPTO minus CTR_DRBG" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG scripts/config.py set MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_CTR_DRBG_C make CFLAGS="$ASAN_CFLAGS -O2" LDFLAGS="$ASAN_CFLAGS" msg "test: full + PSA_CRYPTO_EXTERNAL_RNG + USE_PSA_CRYPTO minus CTR_DRBG" make test msg "test: full + PSA_CRYPTO_EXTERNAL_RNG + USE_PSA_CRYPTO minus CTR_DRBG" tests/ssl-opt.sh -f 'Default\|opaque' } component_test_psa_inject_entropy () { msg "build: full + MBEDTLS_PSA_INJECT_ENTROPY" scripts/config.py full scripts/config.py set MBEDTLS_PSA_INJECT_ENTROPY scripts/config.py set MBEDTLS_ENTROPY_NV_SEED scripts/config.py set MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT scripts/config.py unset MBEDTLS_PLATFORM_STD_NV_SEED_READ scripts/config.py unset MBEDTLS_PLATFORM_STD_NV_SEED_WRITE make CFLAGS="$ASAN_CFLAGS '-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/user-config-for-test.h\"'" LDFLAGS="$ASAN_CFLAGS" msg "test: full + MBEDTLS_PSA_INJECT_ENTROPY" make test } component_test_sw_inet_pton () { msg "build: default plus MBEDTLS_TEST_SW_INET_PTON" # MBEDTLS_TEST_HOOKS required for x509_crt_parse_cn_inet_pton scripts/config.py set MBEDTLS_TEST_HOOKS make CFLAGS="-DMBEDTLS_TEST_SW_INET_PTON" msg "test: default plus MBEDTLS_TEST_SW_INET_PTON" make test } component_test_crypto_full_md_light_only () { msg "build: crypto_full with only the light subset of MD" scripts/config.py crypto_full # Disable MD scripts/config.py unset MBEDTLS_MD_C # Disable direct dependencies of MD_C scripts/config.py unset MBEDTLS_HKDF_C scripts/config.py unset MBEDTLS_HMAC_DRBG_C scripts/config.py unset MBEDTLS_PKCS7_C # Disable indirect dependencies of MD_C scripts/config.py unset MBEDTLS_ECDSA_DETERMINISTIC # needs HMAC_DRBG # Disable things that would auto-enable MD_C scripts/config.py unset MBEDTLS_PKCS5_C # Note: MD-light is auto-enabled in build_info.h by modules that need it, # which we haven't disabled, so no need to explicitly enable it. make CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS" # Make sure we don't have the HMAC functions, but the hashing functions not grep mbedtls_md_hmac library/md.o grep mbedtls_md library/md.o msg "test: crypto_full with only the light subset of MD" make test } component_test_full_no_cipher () { msg "build: full minus CIPHER" scripts/config.py full scripts/config.py unset MBEDTLS_CIPHER_C # Direct dependencies scripts/config.py unset MBEDTLS_CCM_C scripts/config.py unset MBEDTLS_CMAC_C scripts/config.py unset MBEDTLS_GCM_C scripts/config.py unset MBEDTLS_NIST_KW_C scripts/config.py unset MBEDTLS_PKCS12_C scripts/config.py unset MBEDTLS_PKCS5_C scripts/config.py unset MBEDTLS_PSA_CRYPTO_C scripts/config.py unset MBEDTLS_SSL_TLS_C scripts/config.py unset MBEDTLS_SSL_TICKET_C # Indirect dependencies scripts/config.py unset MBEDTLS_SSL_CLI_C scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C scripts/config.py unset MBEDTLS_SSL_DTLS_ANTI_REPLAY scripts/config.py unset MBEDTLS_SSL_DTLS_CONNECTION_ID scripts/config.py unset MBEDTLS_SSL_DTLS_CONNECTION_ID_COMPAT scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py unset MBEDTLS_SSL_SRV_C scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_LMS_C scripts/config.py unset MBEDTLS_LMS_PRIVATE make msg "test: full minus CIPHER" make test } component_test_full_no_bignum () { msg "build: full minus bignum" scripts/config.py full scripts/config.py unset MBEDTLS_BIGNUM_C # Direct dependencies of bignum scripts/config.py unset MBEDTLS_ECP_C scripts/config.py unset MBEDTLS_RSA_C scripts/config.py unset MBEDTLS_DHM_C # Direct dependencies of ECP scripts/config.py unset MBEDTLS_ECDH_C scripts/config.py unset MBEDTLS_ECDSA_C scripts/config.py unset MBEDTLS_ECJPAKE_C scripts/config.py unset MBEDTLS_ECP_RESTARTABLE # Disable what auto-enables ECP_LIGHT scripts/config.py unset MBEDTLS_PK_PARSE_EC_EXTENDED scripts/config.py unset MBEDTLS_PK_PARSE_EC_COMPRESSED # Indirect dependencies of ECP scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED # Direct dependencies of DHM scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED # Direct dependencies of RSA scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_ENABLED scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT # PK and its dependencies scripts/config.py unset MBEDTLS_PK_C scripts/config.py unset MBEDTLS_PK_PARSE_C scripts/config.py unset MBEDTLS_PK_WRITE_C scripts/config.py unset MBEDTLS_X509_USE_C scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C scripts/config.py unset MBEDTLS_X509_CRL_PARSE_C scripts/config.py unset MBEDTLS_X509_CSR_PARSE_C scripts/config.py unset MBEDTLS_X509_CREATE_C scripts/config.py unset MBEDTLS_X509_CRT_WRITE_C scripts/config.py unset MBEDTLS_X509_CSR_WRITE_C scripts/config.py unset MBEDTLS_PKCS7_C scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION scripts/config.py unset MBEDTLS_SSL_ASYNC_PRIVATE scripts/config.py unset MBEDTLS_X509_TRUSTED_CERTIFICATE_CALLBACK make msg "test: full minus bignum" make test } component_test_tls1_2_default_stream_cipher_only () { msg "build: default with only stream cipher" # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C scripts/config.py unset MBEDTLS_GCM_C scripts/config.py unset MBEDTLS_CCM_C scripts/config.py unset MBEDTLS_CHACHAPOLY_C # Disable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES)) scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC # Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC) scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC # Enable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER)) scripts/config.py set MBEDTLS_CIPHER_NULL_CIPHER # Modules that depend on AEAD scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION scripts/config.py unset MBEDTLS_SSL_TICKET_C make msg "test: default with only stream cipher" make test # Not running ssl-opt.sh because most tests require a non-NULL ciphersuite. } component_test_tls1_2_default_stream_cipher_only_use_psa () { msg "build: default with only stream cipher use psa" scripts/config.py set MBEDTLS_USE_PSA_CRYPTO # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C) scripts/config.py unset MBEDTLS_GCM_C scripts/config.py unset MBEDTLS_CCM_C scripts/config.py unset MBEDTLS_CHACHAPOLY_C # Disable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES)) scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC # Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC) scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC # Enable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER)) scripts/config.py set MBEDTLS_CIPHER_NULL_CIPHER # Modules that depend on AEAD scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION scripts/config.py unset MBEDTLS_SSL_TICKET_C make msg "test: default with only stream cipher use psa" make test # Not running ssl-opt.sh because most tests require a non-NULL ciphersuite. } component_test_tls1_2_default_cbc_legacy_cipher_only () { msg "build: default with only CBC-legacy cipher" # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C) scripts/config.py unset MBEDTLS_GCM_C scripts/config.py unset MBEDTLS_CCM_C scripts/config.py unset MBEDTLS_CHACHAPOLY_C # Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES)) scripts/config.py set MBEDTLS_CIPHER_MODE_CBC # Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC) scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC # Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER)) scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER # Modules that depend on AEAD scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION scripts/config.py unset MBEDTLS_SSL_TICKET_C make msg "test: default with only CBC-legacy cipher" make test msg "test: default with only CBC-legacy cipher - ssl-opt.sh (subset)" tests/ssl-opt.sh -f "TLS 1.2" } component_test_tls1_2_deafult_cbc_legacy_cipher_only_use_psa () { msg "build: default with only CBC-legacy cipher use psa" scripts/config.py set MBEDTLS_USE_PSA_CRYPTO # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C) scripts/config.py unset MBEDTLS_GCM_C scripts/config.py unset MBEDTLS_CCM_C scripts/config.py unset MBEDTLS_CHACHAPOLY_C # Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES)) scripts/config.py set MBEDTLS_CIPHER_MODE_CBC # Disable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC) scripts/config.py unset MBEDTLS_SSL_ENCRYPT_THEN_MAC # Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER)) scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER # Modules that depend on AEAD scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION scripts/config.py unset MBEDTLS_SSL_TICKET_C make msg "test: default with only CBC-legacy cipher use psa" make test msg "test: default with only CBC-legacy cipher use psa - ssl-opt.sh (subset)" tests/ssl-opt.sh -f "TLS 1.2" } component_test_tls1_2_default_cbc_legacy_cbc_etm_cipher_only () { msg "build: default with only CBC-legacy and CBC-EtM ciphers" # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C) scripts/config.py unset MBEDTLS_GCM_C scripts/config.py unset MBEDTLS_CCM_C scripts/config.py unset MBEDTLS_CHACHAPOLY_C # Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES)) scripts/config.py set MBEDTLS_CIPHER_MODE_CBC # Enable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC) scripts/config.py set MBEDTLS_SSL_ENCRYPT_THEN_MAC # Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER)) scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER # Modules that depend on AEAD scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION scripts/config.py unset MBEDTLS_SSL_TICKET_C make msg "test: default with only CBC-legacy and CBC-EtM ciphers" make test msg "test: default with only CBC-legacy and CBC-EtM ciphers - ssl-opt.sh (subset)" tests/ssl-opt.sh -f "TLS 1.2" } component_test_tls1_2_default_cbc_legacy_cbc_etm_cipher_only_use_psa () { msg "build: default with only CBC-legacy and CBC-EtM ciphers use psa" scripts/config.py set MBEDTLS_USE_PSA_CRYPTO # Disable AEAD (controlled by the presence of one of GCM_C, CCM_C, CHACHAPOLY_C) scripts/config.py unset MBEDTLS_GCM_C scripts/config.py unset MBEDTLS_CCM_C scripts/config.py unset MBEDTLS_CHACHAPOLY_C # Enable CBC-legacy (controlled by MBEDTLS_CIPHER_MODE_CBC plus at least one block cipher (AES, ARIA, Camellia, DES)) scripts/config.py set MBEDTLS_CIPHER_MODE_CBC # Enable CBC-EtM (controlled by the same as CBC-legacy plus MBEDTLS_SSL_ENCRYPT_THEN_MAC) scripts/config.py set MBEDTLS_SSL_ENCRYPT_THEN_MAC # Disable stream (currently that's just the NULL pseudo-cipher (controlled by MBEDTLS_CIPHER_NULL_CIPHER)) scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER # Modules that depend on AEAD scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION scripts/config.py unset MBEDTLS_SSL_TICKET_C make msg "test: default with only CBC-legacy and CBC-EtM ciphers use psa" make test msg "test: default with only CBC-legacy and CBC-EtM ciphers use psa - ssl-opt.sh (subset)" tests/ssl-opt.sh -f "TLS 1.2" } # We're not aware of any other (open source) implementation of EC J-PAKE in TLS # that we could use for interop testing. However, we now have sort of two # implementations ourselves: one using PSA, the other not. At least test that # these two interoperate with each other. component_test_tls1_2_ecjpake_compatibility() { msg "build: TLS1.2 server+client w/ EC-JPAKE w/o USE_PSA" scripts/config.py set MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED make -C programs ssl/ssl_server2 ssl/ssl_client2 cp programs/ssl/ssl_server2 s2_no_use_psa cp programs/ssl/ssl_client2 c2_no_use_psa msg "build: TLS1.2 server+client w/ EC-JPAKE w/ USE_PSA" scripts/config.py set MBEDTLS_USE_PSA_CRYPTO make clean make -C programs ssl/ssl_server2 ssl/ssl_client2 make -C programs test/udp_proxy test/query_compile_time_config msg "test: server w/o USE_PSA - client w/ USE_PSA, text password" P_SRV=../s2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: working, TLS" msg "test: server w/o USE_PSA - client w/ USE_PSA, opaque password" P_SRV=../s2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: opaque password client only, working, TLS" msg "test: client w/o USE_PSA - server w/ USE_PSA, text password" P_CLI=../c2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: working, TLS" msg "test: client w/o USE_PSA - server w/ USE_PSA, opaque password" P_CLI=../c2_no_use_psa tests/ssl-opt.sh -f "ECJPAKE: opaque password server only, working, TLS" rm s2_no_use_psa c2_no_use_psa } component_test_everest () { msg "build: Everest ECDH context (ASan build)" # ~ 6 min scripts/config.py set MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED CC=clang cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: Everest ECDH context - main suites (inc. selftests) (ASan build)" # ~ 50s make test msg "test: Everest ECDH context - ECDH-related part of ssl-opt.sh (ASan build)" # ~ 5s tests/ssl-opt.sh -f ECDH msg "test: Everest ECDH context - compat.sh with some ECDH ciphersuites (ASan build)" # ~ 3 min # Exclude some symmetric ciphers that are redundant here to gain time. tests/compat.sh -f ECDH -V NO -e 'ARIA\|CAMELLIA\|CHACHA' } component_test_everest_curve25519_only () { msg "build: Everest ECDH context, only Curve25519" # ~ 6 min scripts/config.py set MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED scripts/config.py unset MBEDTLS_ECDSA_C scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED scripts/config.py unset MBEDTLS_ECJPAKE_C # Disable all curves scripts/config.py unset-all "MBEDTLS_ECP_DP_[0-9A-Z_a-z]*_ENABLED" scripts/config.py set MBEDTLS_ECP_DP_CURVE25519_ENABLED make CFLAGS="$ASAN_CFLAGS -O2" LDFLAGS="$ASAN_CFLAGS" msg "test: Everest ECDH context, only Curve25519" # ~ 50s make test } component_test_small_ssl_out_content_len () { msg "build: small SSL_OUT_CONTENT_LEN (ASan build)" scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 16384 scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 4096 CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: small SSL_OUT_CONTENT_LEN - ssl-opt.sh MFL and large packet tests" tests/ssl-opt.sh -f "Max fragment\|Large packet" } component_test_small_ssl_in_content_len () { msg "build: small SSL_IN_CONTENT_LEN (ASan build)" scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 4096 scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 16384 CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: small SSL_IN_CONTENT_LEN - ssl-opt.sh MFL tests" tests/ssl-opt.sh -f "Max fragment" } component_test_small_ssl_dtls_max_buffering () { msg "build: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #0" scripts/config.py set MBEDTLS_SSL_DTLS_MAX_BUFFERING 1000 CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #0 - ssl-opt.sh specific reordering test" tests/ssl-opt.sh -f "DTLS reordering: Buffer out-of-order hs msg before reassembling next, free buffered msg" } component_test_small_mbedtls_ssl_dtls_max_buffering () { msg "build: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #1" scripts/config.py set MBEDTLS_SSL_DTLS_MAX_BUFFERING 190 CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: small MBEDTLS_SSL_DTLS_MAX_BUFFERING #1 - ssl-opt.sh specific reordering test" tests/ssl-opt.sh -f "DTLS reordering: Buffer encrypted Finished message, drop for fragmented NewSessionTicket" } component_test_psa_collect_statuses () { msg "build+test: psa_collect_statuses" # ~30s scripts/config.py full tests/scripts/psa_collect_statuses.py # Check that psa_crypto_init() succeeded at least once grep -q '^0:psa_crypto_init:' tests/statuses.log rm -f tests/statuses.log } component_test_full_cmake_clang () { msg "build: cmake, full config, clang" # ~ 50s scripts/config.py full CC=clang CXX=clang cmake -D CMAKE_BUILD_TYPE:String=Release -D ENABLE_TESTING=On -D TEST_CPP=1 . make msg "test: main suites (full config, clang)" # ~ 5s make test msg "test: cpp_dummy_build (full config, clang)" # ~ 1s programs/test/cpp_dummy_build msg "test: psa_constant_names (full config, clang)" # ~ 1s tests/scripts/test_psa_constant_names.py msg "test: ssl-opt.sh default, ECJPAKE, SSL async (full config)" # ~ 1s tests/ssl-opt.sh -f 'Default\|ECJPAKE\|SSL async private' msg "test: compat.sh NULL (full config)" # ~ 2 min env OPENSSL="$OPENSSL_LEGACY" GNUTLS_CLI="$GNUTLS_LEGACY_CLI" GNUTLS_SERV="$GNUTLS_LEGACY_SERV" tests/compat.sh -e '^$' -f 'NULL' msg "test: compat.sh ARIA + ChachaPoly" env OPENSSL="$OPENSSL_NEXT" tests/compat.sh -e '^$' -f 'ARIA\|CHACHA' } skip_suites_without_constant_flow () { # Skip the test suites that don't have any constant-flow annotations. # This will need to be adjusted if we ever start declaring things as # secret from macros or functions inside tests/include or tests/src. SKIP_TEST_SUITES=$( git -C tests/suites grep -L TEST_CF_ 'test_suite_*.function' | sed 's/test_suite_//; s/\.function$//' | tr '\n' ,) export SKIP_TEST_SUITES } skip_all_except_given_suite () { # Skip all but the given test suite SKIP_TEST_SUITES=$( ls -1 tests/suites/test_suite_*.function | grep -v $1.function | sed 's/tests.suites.test_suite_//; s/\.function$//' | tr '\n' ,) export SKIP_TEST_SUITES } component_test_memsan_constant_flow () { # This tests both (1) accesses to undefined memory, and (2) branches or # memory access depending on secret values. To distinguish between those: # - unset MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN - does the failure persist? # - or alternatively, change the build type to MemSanDbg, which enables # origin tracking and nicer stack traces (which are useful for debugging # anyway), and check if the origin was TEST_CF_SECRET() or something else. msg "build: cmake MSan (clang), full config minus MBEDTLS_USE_PSA_CRYPTO with constant flow testing" scripts/config.py full scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_AESNI_C # memsan doesn't grok asm CC=clang cmake -D CMAKE_BUILD_TYPE:String=MemSan . make msg "test: main suites (full minus MBEDTLS_USE_PSA_CRYPTO, Msan + constant flow)" make test } component_test_memsan_constant_flow_psa () { # This tests both (1) accesses to undefined memory, and (2) branches or # memory access depending on secret values. To distinguish between those: # - unset MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN - does the failure persist? # - or alternatively, change the build type to MemSanDbg, which enables # origin tracking and nicer stack traces (which are useful for debugging # anyway), and check if the origin was TEST_CF_SECRET() or something else. msg "build: cmake MSan (clang), full config with constant flow testing" scripts/config.py full scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_MEMSAN scripts/config.py unset MBEDTLS_AESNI_C # memsan doesn't grok asm CC=clang cmake -D CMAKE_BUILD_TYPE:String=MemSan . make msg "test: main suites (Msan + constant flow)" make test } component_test_valgrind_constant_flow () { # This tests both (1) everything that valgrind's memcheck usually checks # (heap buffer overflows, use of uninitialized memory, use-after-free, # etc.) and (2) branches or memory access depending on secret values, # which will be reported as uninitialized memory. To distinguish between # secret and actually uninitialized: # - unset MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND - does the failure persist? # - or alternatively, build with debug info and manually run the offending # test suite with valgrind --track-origins=yes, then check if the origin # was TEST_CF_SECRET() or something else. msg "build: cmake release GCC, full config minus MBEDTLS_USE_PSA_CRYPTO with constant flow testing" scripts/config.py full scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO skip_suites_without_constant_flow cmake -D CMAKE_BUILD_TYPE:String=Release . make # this only shows a summary of the results (how many of each type) # details are left in Testing//DynamicAnalysis.xml msg "test: some suites (full minus MBEDTLS_USE_PSA_CRYPTO, valgrind + constant flow)" make memcheck # Test asm path in constant time module - by default, it will test the plain C # path under Valgrind or Memsan. Running only the constant_time tests is fast (<1s) msg "test: valgrind asm constant_time" scripts/config.py --force set MBEDTLS_TEST_CONSTANT_FLOW_ASM skip_all_except_given_suite test_suite_constant_time cmake -D CMAKE_BUILD_TYPE:String=Release . make clean make make memcheck } component_test_valgrind_constant_flow_psa () { # This tests both (1) everything that valgrind's memcheck usually checks # (heap buffer overflows, use of uninitialized memory, use-after-free, # etc.) and (2) branches or memory access depending on secret values, # which will be reported as uninitialized memory. To distinguish between # secret and actually uninitialized: # - unset MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND - does the failure persist? # - or alternatively, build with debug info and manually run the offending # test suite with valgrind --track-origins=yes, then check if the origin # was TEST_CF_SECRET() or something else. msg "build: cmake release GCC, full config with constant flow testing" scripts/config.py full scripts/config.py set MBEDTLS_TEST_CONSTANT_FLOW_VALGRIND skip_suites_without_constant_flow cmake -D CMAKE_BUILD_TYPE:String=Release . make # this only shows a summary of the results (how many of each type) # details are left in Testing//DynamicAnalysis.xml msg "test: some suites (valgrind + constant flow)" make memcheck } component_test_default_no_deprecated () { # Test that removing the deprecated features from the default # configuration leaves something consistent. msg "build: make, default + MBEDTLS_DEPRECATED_REMOVED" # ~ 30s scripts/config.py set MBEDTLS_DEPRECATED_REMOVED make CC=gcc CFLAGS='-O -Werror -Wall -Wextra' msg "test: make, default + MBEDTLS_DEPRECATED_REMOVED" # ~ 5s make test } component_test_full_no_deprecated () { msg "build: make, full_no_deprecated config" # ~ 30s scripts/config.py full_no_deprecated make CC=gcc CFLAGS='-O -Werror -Wall -Wextra' msg "test: make, full_no_deprecated config" # ~ 5s make test msg "test: ensure that X509 has no direct dependency on BIGNUM_C" not grep mbedtls_mpi library/libmbedx509.a } component_test_full_no_deprecated_deprecated_warning () { # Test that there is nothing deprecated in "full_no_deprecated". # A deprecated feature would trigger a warning (made fatal) from # MBEDTLS_DEPRECATED_WARNING. msg "build: make, full_no_deprecated config, MBEDTLS_DEPRECATED_WARNING" # ~ 30s scripts/config.py full_no_deprecated scripts/config.py unset MBEDTLS_DEPRECATED_REMOVED scripts/config.py set MBEDTLS_DEPRECATED_WARNING make CC=gcc CFLAGS='-O -Werror -Wall -Wextra' msg "test: make, full_no_deprecated config, MBEDTLS_DEPRECATED_WARNING" # ~ 5s make test } component_test_full_deprecated_warning () { # Test that when MBEDTLS_DEPRECATED_WARNING is enabled, the build passes # with only certain whitelisted types of warnings. msg "build: make, full config + MBEDTLS_DEPRECATED_WARNING, expect warnings" # ~ 30s scripts/config.py full scripts/config.py set MBEDTLS_DEPRECATED_WARNING # Expect warnings from '#warning' directives in check_config.h. make CC=gcc CFLAGS='-O -Werror -Wall -Wextra -Wno-error=cpp' lib programs msg "build: make tests, full config + MBEDTLS_DEPRECATED_WARNING, expect warnings" # ~ 30s # Set MBEDTLS_TEST_DEPRECATED to enable tests for deprecated features. # By default those are disabled when MBEDTLS_DEPRECATED_WARNING is set. # Expect warnings from '#warning' directives in check_config.h and # from the use of deprecated functions in test suites. make CC=gcc CFLAGS='-O -Werror -Wall -Wextra -Wno-error=deprecated-declarations -Wno-error=cpp -DMBEDTLS_TEST_DEPRECATED' tests msg "test: full config + MBEDTLS_TEST_DEPRECATED" # ~ 30s make test } # Check that the specified libraries exist and are empty. are_empty_libraries () { nm "$@" >/dev/null 2>/dev/null ! nm "$@" 2>/dev/null | grep -v ':$' | grep . } component_build_crypto_default () { msg "build: make, crypto only" scripts/config.py crypto make CFLAGS='-O1 -Werror' are_empty_libraries library/libmbedx509.* library/libmbedtls.* } component_build_crypto_full () { msg "build: make, crypto only, full config" scripts/config.py crypto_full make CFLAGS='-O1 -Werror' are_empty_libraries library/libmbedx509.* library/libmbedtls.* } component_test_crypto_for_psa_service () { msg "build: make, config for PSA crypto service" scripts/config.py crypto scripts/config.py set MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER # Disable things that are not needed for just cryptography, to # reach a configuration that would be typical for a PSA cryptography # service providing all implemented PSA algorithms. # System stuff scripts/config.py unset MBEDTLS_ERROR_C scripts/config.py unset MBEDTLS_TIMING_C scripts/config.py unset MBEDTLS_VERSION_FEATURES # Crypto stuff with no PSA interface scripts/config.py unset MBEDTLS_BASE64_C # Keep MBEDTLS_CIPHER_C because psa_crypto_cipher, CCM and GCM need it. scripts/config.py unset MBEDTLS_HKDF_C # PSA's HKDF is independent # Keep MBEDTLS_MD_C because deterministic ECDSA needs it for HMAC_DRBG. scripts/config.py unset MBEDTLS_NIST_KW_C scripts/config.py unset MBEDTLS_PEM_PARSE_C scripts/config.py unset MBEDTLS_PEM_WRITE_C scripts/config.py unset MBEDTLS_PKCS12_C scripts/config.py unset MBEDTLS_PKCS5_C # MBEDTLS_PK_PARSE_C and MBEDTLS_PK_WRITE_C are actually currently needed # in PSA code to work with RSA keys. We don't require users to set those: # they will be reenabled in build_info.h. scripts/config.py unset MBEDTLS_PK_C scripts/config.py unset MBEDTLS_PK_PARSE_C scripts/config.py unset MBEDTLS_PK_WRITE_C make CFLAGS='-O1 -Werror' all test are_empty_libraries library/libmbedx509.* library/libmbedtls.* } component_build_crypto_baremetal () { msg "build: make, crypto only, baremetal config" scripts/config.py crypto_baremetal make CFLAGS="-O1 -Werror -I$PWD/tests/include/baremetal-override/" are_empty_libraries library/libmbedx509.* library/libmbedtls.* } support_build_crypto_baremetal () { support_build_baremetal "$@" } component_build_baremetal () { msg "build: make, baremetal config" scripts/config.py baremetal make CFLAGS="-O1 -Werror -I$PWD/tests/include/baremetal-override/" } support_build_baremetal () { # Older Glibc versions include time.h from other headers such as stdlib.h, # which makes the no-time.h-in-baremetal check fail. Ubuntu 16.04 has this # problem, Ubuntu 18.04 is ok. ! grep -q -F time.h /usr/include/x86_64-linux-gnu/sys/types.h } # depends.py family of tests component_test_depends_py_cipher_id () { msg "test/build: depends.py cipher_id (gcc)" tests/scripts/depends.py cipher_id --unset-use-psa } component_test_depends_py_cipher_chaining () { msg "test/build: depends.py cipher_chaining (gcc)" tests/scripts/depends.py cipher_chaining --unset-use-psa } component_test_depends_py_cipher_padding () { msg "test/build: depends.py cipher_padding (gcc)" tests/scripts/depends.py cipher_padding --unset-use-psa } component_test_depends_py_curves () { msg "test/build: depends.py curves (gcc)" tests/scripts/depends.py curves --unset-use-psa } component_test_depends_py_hashes () { msg "test/build: depends.py hashes (gcc)" tests/scripts/depends.py hashes --unset-use-psa } component_test_depends_py_kex () { msg "test/build: depends.py kex (gcc)" tests/scripts/depends.py kex --unset-use-psa } component_test_depends_py_pkalgs () { msg "test/build: depends.py pkalgs (gcc)" tests/scripts/depends.py pkalgs --unset-use-psa } # PSA equivalents of the depends.py tests component_test_depends_py_cipher_id_psa () { msg "test/build: depends.py cipher_id (gcc) with MBEDTLS_USE_PSA_CRYPTO defined" tests/scripts/depends.py cipher_id } component_test_depends_py_cipher_chaining_psa () { msg "test/build: depends.py cipher_chaining (gcc) with MBEDTLS_USE_PSA_CRYPTO defined" tests/scripts/depends.py cipher_chaining } component_test_depends_py_cipher_padding_psa () { msg "test/build: depends.py cipher_padding (gcc) with MBEDTLS_USE_PSA_CRYPTO defined" tests/scripts/depends.py cipher_padding } component_test_depends_py_curves_psa () { msg "test/build: depends.py curves (gcc) with MBEDTLS_USE_PSA_CRYPTO defined" tests/scripts/depends.py curves } component_test_depends_py_hashes_psa () { msg "test/build: depends.py hashes (gcc) with MBEDTLS_USE_PSA_CRYPTO defined" tests/scripts/depends.py hashes } component_test_depends_py_kex_psa () { msg "test/build: depends.py kex (gcc) with MBEDTLS_USE_PSA_CRYPTO defined" tests/scripts/depends.py kex } component_test_depends_py_pkalgs_psa () { msg "test/build: depends.py pkalgs (gcc) with MBEDTLS_USE_PSA_CRYPTO defined" tests/scripts/depends.py pkalgs } component_build_no_pk_rsa_alt_support () { msg "build: !MBEDTLS_PK_RSA_ALT_SUPPORT" # ~30s scripts/config.py full scripts/config.py unset MBEDTLS_PK_RSA_ALT_SUPPORT scripts/config.py set MBEDTLS_RSA_C scripts/config.py set MBEDTLS_X509_CRT_WRITE_C # Only compile - this is primarily to test for compile issues make CC=gcc CFLAGS='-Werror -Wall -Wextra -I../tests/include/alt-dummy' } component_build_module_alt () { msg "build: MBEDTLS_XXX_ALT" # ~30s scripts/config.py full # Disable options that are incompatible with some ALT implementations: # aesni.c and padlock.c reference mbedtls_aes_context fields directly. scripts/config.py unset MBEDTLS_AESNI_C scripts/config.py unset MBEDTLS_PADLOCK_C scripts/config.py unset MBEDTLS_AESCE_C # MBEDTLS_ECP_RESTARTABLE is documented as incompatible. scripts/config.py unset MBEDTLS_ECP_RESTARTABLE # You can only have one threading implementation: alt or pthread, not both. scripts/config.py unset MBEDTLS_THREADING_PTHREAD # The SpecifiedECDomain parsing code accesses mbedtls_ecp_group fields # directly and assumes the implementation works with partial groups. scripts/config.py unset MBEDTLS_PK_PARSE_EC_EXTENDED # MBEDTLS_SHA256_*ALT can't be used with MBEDTLS_SHA256_USE_A64_CRYPTO_* scripts/config.py unset MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT scripts/config.py unset MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY # MBEDTLS_SHA512_*ALT can't be used with MBEDTLS_SHA512_USE_A64_CRYPTO_* scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_ONLY # Enable all MBEDTLS_XXX_ALT for whole modules. Do not enable # MBEDTLS_XXX_YYY_ALT which are for single functions. scripts/config.py set-all 'MBEDTLS_([A-Z0-9]*|NIST_KW)_ALT' scripts/config.py unset MBEDTLS_DHM_ALT #incompatible with MBEDTLS_DEBUG_C # We can only compile, not link, since we don't have any implementations # suitable for testing with the dummy alt headers. make CC=gcc CFLAGS='-Werror -Wall -Wextra -I../tests/include/alt-dummy' lib } component_build_dhm_alt () { msg "build: MBEDTLS_DHM_ALT" # ~30s scripts/config.py full scripts/config.py set MBEDTLS_DHM_ALT # debug.c currently references mbedtls_dhm_context fields directly. scripts/config.py unset MBEDTLS_DEBUG_C # We can only compile, not link, since we don't have any implementations # suitable for testing with the dummy alt headers. make CC=gcc CFLAGS='-Werror -Wall -Wextra -I../tests/include/alt-dummy' lib } component_test_no_use_psa_crypto_full_cmake_asan() { # full minus MBEDTLS_USE_PSA_CRYPTO: run the same set of tests as basic-build-test.sh msg "build: cmake, full config minus MBEDTLS_USE_PSA_CRYPTO, ASan" scripts/config.py full scripts/config.py unset MBEDTLS_PSA_CRYPTO_C scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py unset MBEDTLS_PSA_ITS_FILE_C scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C scripts/config.py unset MBEDTLS_LMS_C scripts/config.py unset MBEDTLS_LMS_PRIVATE CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: main suites (full minus MBEDTLS_USE_PSA_CRYPTO)" make test # Note: ssl-opt.sh has some test cases that depend on # MBEDTLS_ECP_RESTARTABLE && !MBEDTLS_USE_PSA_CRYPTO # This is the only component where those tests are not skipped. msg "test: ssl-opt.sh (full minus MBEDTLS_USE_PSA_CRYPTO)" tests/ssl-opt.sh msg "test: compat.sh default (full minus MBEDTLS_USE_PSA_CRYPTO)" tests/compat.sh msg "test: compat.sh NULL (full minus MBEDTLS_USE_PSA_CRYPTO)" env OPENSSL="$OPENSSL_LEGACY" GNUTLS_CLI="$GNUTLS_LEGACY_CLI" GNUTLS_SERV="$GNUTLS_LEGACY_SERV" tests/compat.sh -f 'NULL' msg "test: compat.sh ARIA + ChachaPoly (full minus MBEDTLS_USE_PSA_CRYPTO)" env OPENSSL="$OPENSSL_NEXT" tests/compat.sh -e '^$' -f 'ARIA\|CHACHA' } component_test_psa_crypto_config_accel_ecdsa () { msg "build: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDSA" # Algorithms and key types to accelerate loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \ KEY_TYPE_ECC_KEY_PAIR_BASIC \ KEY_TYPE_ECC_KEY_PAIR_IMPORT \ KEY_TYPE_ECC_KEY_PAIR_EXPORT \ KEY_TYPE_ECC_KEY_PAIR_GENERATE \ KEY_TYPE_ECC_PUBLIC_KEY" # Configure # --------- # Start from default config (no USE_PSA) + TLS 1.3 helper_libtestdriver1_adjust_config "default" scripts/config.py set MBEDTLS_SSL_PROTO_TLS1_3 # Disable the module that's accelerated scripts/config.py unset MBEDTLS_ECDSA_C # Disable things that depend on it scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED # Build # ----- # These hashes are needed for some ECDSA signature tests. loc_extra_list="ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512" helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list" helper_libtestdriver1_make_main "$loc_accel_list" # Make sure this was not re-enabled by accident (additive config) not grep mbedtls_ecdsa_ library/ecdsa.o # Run the tests # ------------- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDSA" make test } component_test_psa_crypto_config_accel_ecdh () { msg "build: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDH" # Algorithms and key types to accelerate loc_accel_list="ALG_ECDH \ KEY_TYPE_ECC_KEY_PAIR_BASIC \ KEY_TYPE_ECC_KEY_PAIR_IMPORT \ KEY_TYPE_ECC_KEY_PAIR_EXPORT \ KEY_TYPE_ECC_KEY_PAIR_GENERATE \ KEY_TYPE_ECC_PUBLIC_KEY" # Configure # --------- # Start from default config (no TLS 1.3, no USE_PSA) helper_libtestdriver1_adjust_config "default" # Disable the module that's accelerated scripts/config.py unset MBEDTLS_ECDH_C # Disable things that depend on it scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED # Build # ----- helper_libtestdriver1_make_drivers "$loc_accel_list" helper_libtestdriver1_make_main "$loc_accel_list" # Make sure this was not re-enabled by accident (additive config) not grep mbedtls_ecdh_ library/ecdh.o # Run the tests # ------------- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated ECDH" make test } component_test_psa_crypto_config_accel_ffdh () { msg "build: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated FFDH" # Algorithms and key types to accelerate loc_accel_list="ALG_FFDH \ KEY_TYPE_DH_KEY_PAIR_BASIC \ KEY_TYPE_DH_KEY_PAIR_IMPORT \ KEY_TYPE_DH_KEY_PAIR_EXPORT \ KEY_TYPE_DH_KEY_PAIR_GENERATE \ KEY_TYPE_DH_PUBLIC_KEY" # Configure # --------- # start with full (USE_PSA and TLS 1.3) helper_libtestdriver1_adjust_config "full" # Disable the module that's accelerated scripts/config.py unset MBEDTLS_DHM_C # Disable things that depend on it scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED # Build # ----- helper_libtestdriver1_make_drivers "$loc_accel_list" helper_libtestdriver1_make_main "$loc_accel_list" # Make sure this was not re-enabled by accident (additive config) not grep mbedtls_dhm_ library/dhm.o # Run the tests # ------------- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated FFDH" make test msg "ssl-opt: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated FFDH alg" tests/ssl-opt.sh -f "ffdh" } component_test_psa_crypto_config_reference_ffdh () { msg "build: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated FFDH" # Start with full (USE_PSA and TLS 1.3) helper_libtestdriver1_adjust_config "full" # Disable things that are not supported scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED make msg "test suites: MBEDTLS_PSA_CRYPTO_CONFIG with non-accelerated FFDH alg + USE_PSA" make test msg "ssl-opt: MBEDTLS_PSA_CRYPTO_CONFIG with non-accelerated FFDH alg + USE_PSA" tests/ssl-opt.sh -f "ffdh" } component_test_psa_crypto_config_accel_pake() { msg "build: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated PAKE" loc_accel_list="ALG_JPAKE" # Configure # --------- helper_libtestdriver1_adjust_config "full" # Make built-in fallback not available scripts/config.py unset MBEDTLS_ECJPAKE_C scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED # Build # ----- helper_libtestdriver1_make_drivers "$loc_accel_list" helper_libtestdriver1_make_main "$loc_accel_list" # Make sure this was not re-enabled by accident (additive config) not grep mbedtls_ecjpake_init library/ecjpake.o # Run the tests # ------------- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated PAKE" make test } # Auxiliary function to build config for all EC based algorithms (EC-JPAKE, # ECDH, ECDSA) with and without drivers. # The input parameter is a boolean value which indicates: # - 0 keep built-in EC algs, # - 1 exclude built-in EC algs (driver only). # # This is used by the two following components to ensure they always use the # same config, except for the use of driver or built-in EC algorithms: # - component_test_psa_crypto_config_accel_ecc_ecp_light_only; # - component_test_psa_crypto_config_reference_ecc_ecp_light_only. # This supports comparing their test coverage with analyze_outcomes.py. config_psa_crypto_config_ecp_ligh_only () { DRIVER_ONLY="$1" # start with config full for maximum coverage (also enables USE_PSA) helper_libtestdriver1_adjust_config "full" if [ "$DRIVER_ONLY" -eq 1 ]; then # Disable modules that are accelerated scripts/config.py unset MBEDTLS_ECDSA_C scripts/config.py unset MBEDTLS_ECDH_C scripts/config.py unset MBEDTLS_ECJPAKE_C scripts/config.py unset MBEDTLS_ECP_C fi # Restartable feature is not yet supported by PSA. Once it will in # the future, the following line could be removed (see issues # 6061, 6332 and following ones) scripts/config.py unset MBEDTLS_ECP_RESTARTABLE } # Keep in sync with component_test_psa_crypto_config_reference_ecc_ecp_light_only component_test_psa_crypto_config_accel_ecc_ecp_light_only () { msg "build: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated EC algs + USE_PSA" # Algorithms and key types to accelerate loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \ ALG_ECDH \ ALG_JPAKE \ KEY_TYPE_ECC_KEY_PAIR_BASIC \ KEY_TYPE_ECC_KEY_PAIR_IMPORT \ KEY_TYPE_ECC_KEY_PAIR_EXPORT \ KEY_TYPE_ECC_KEY_PAIR_GENERATE \ KEY_TYPE_ECC_PUBLIC_KEY" # Configure # --------- # Use the same config as reference, only without built-in EC algs config_psa_crypto_config_ecp_ligh_only 1 # Build # ----- # These hashes are needed for some ECDSA signature tests. loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512" helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list" helper_libtestdriver1_make_main "$loc_accel_list" # Make sure any built-in EC alg was not re-enabled by accident (additive config) not grep mbedtls_ecdsa_ library/ecdsa.o not grep mbedtls_ecdh_ library/ecdh.o not grep mbedtls_ecjpake_ library/ecjpake.o not grep mbedtls_ecp_mul library/ecp.o # Run the tests # ------------- msg "test suites: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated EC algs + USE_PSA" make test msg "ssl-opt: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated EC algs + USE_PSA" tests/ssl-opt.sh } # Keep in sync with component_test_psa_crypto_config_accel_ecc_ecp_light_only component_test_psa_crypto_config_reference_ecc_ecp_light_only () { msg "build: MBEDTLS_PSA_CRYPTO_CONFIG with non-accelerated EC algs + USE_PSA" config_psa_crypto_config_ecp_ligh_only 0 make msg "test suites: MBEDTLS_PSA_CRYPTO_CONFIG with non-accelerated EC algs + USE_PSA" make test msg "ssl-opt: MBEDTLS_PSA_CRYPTO_CONFIG with non-accelerated EC algs + USE_PSA" tests/ssl-opt.sh } # This helper function is used by: # - component_test_psa_crypto_config_accel_ecc_no_ecp_at_all() # - component_test_psa_crypto_config_reference_ecc_no_ecp_at_all() # to ensure that both tests use the same underlying configuration when testing # driver's coverage with analyze_outcomes.py. # # This functions accepts 1 boolean parameter as follows: # - 1: building with accelerated EC algorithms (ECDSA, ECDH, ECJPAKE), therefore # excluding their built-in implementation as well as ECP_C & ECP_LIGHT # - 0: include built-in implementation of EC algorithms. # # PK_C and RSA_C are always disabled to ensure there is no remaining dependency # on the ECP module. config_psa_crypto_no_ecp_at_all () { DRIVER_ONLY="$1" # start with full config for maximum coverage (also enables USE_PSA) helper_libtestdriver1_adjust_config "full" if [ "$DRIVER_ONLY" -eq 1 ]; then # Disable modules that are accelerated scripts/config.py unset MBEDTLS_ECDSA_C scripts/config.py unset MBEDTLS_ECDH_C scripts/config.py unset MBEDTLS_ECJPAKE_C # Disable ECP module (entirely) scripts/config.py unset MBEDTLS_ECP_C fi # Disable all the features that auto-enable ECP_LIGHT (see build_info.h) scripts/config.py unset MBEDTLS_PK_PARSE_EC_EXTENDED scripts/config.py unset MBEDTLS_PK_PARSE_EC_COMPRESSED scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE # Restartable feature is not yet supported by PSA. Once it will in # the future, the following line could be removed (see issues # 6061, 6332 and following ones) scripts/config.py unset MBEDTLS_ECP_RESTARTABLE } # Build and test a configuration where driver accelerates all EC algs while # all support and dependencies from ECP and ECP_LIGHT are removed on the library # side. # # Keep in sync with component_test_psa_crypto_config_reference_ecc_no_ecp_at_all() component_test_psa_crypto_config_accel_ecc_no_ecp_at_all () { msg "build: full + accelerated EC algs + USE_PSA - ECP" # Algorithms and key types to accelerate loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \ ALG_ECDH \ ALG_JPAKE \ KEY_TYPE_ECC_KEY_PAIR_BASIC \ KEY_TYPE_ECC_KEY_PAIR_IMPORT \ KEY_TYPE_ECC_KEY_PAIR_EXPORT \ KEY_TYPE_ECC_KEY_PAIR_GENERATE \ KEY_TYPE_ECC_PUBLIC_KEY" # Configure # --------- # Set common configurations between library's and driver's builds config_psa_crypto_no_ecp_at_all 1 # Build # ----- # Things we wanted supported in libtestdriver1, but not accelerated in the main library: # SHA-1 and all SHA-2 variants, as they are used by ECDSA deterministic. loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512" helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list" helper_libtestdriver1_make_main "$loc_accel_list" # Make sure any built-in EC alg was not re-enabled by accident (additive config) not grep mbedtls_ecdsa_ library/ecdsa.o not grep mbedtls_ecdh_ library/ecdh.o not grep mbedtls_ecjpake_ library/ecjpake.o # Also ensure that ECP or RSA modules were not re-enabled not grep mbedtls_ecp_ library/ecp.o # Run the tests # ------------- msg "test: full + accelerated EC algs + USE_PSA - ECP" make test msg "ssl-opt: full + accelerated EC algs + USE_PSA - ECP" tests/ssl-opt.sh } # Reference function used for driver's coverage analysis in analyze_outcomes.py # in conjunction with component_test_psa_crypto_config_accel_ecc_no_ecp_at_all(). # Keep in sync with its accelerated counterpart. component_test_psa_crypto_config_reference_ecc_no_ecp_at_all () { msg "build: full + non accelerated EC algs + USE_PSA" config_psa_crypto_no_ecp_at_all 0 make msg "test: full + non accelerated EC algs + USE_PSA" make test msg "ssl-opt: full + non accelerated EC algs + USE_PSA" tests/ssl-opt.sh } # This function is really similar to config_psa_crypto_no_ecp_at_all() above so # its description is basically the same. The main difference in this case is # that when the EC built-in implementation is disabled, then also Bignum module # and its dependencies are disabled as well. # # This is the common helper between: # - component_test_psa_crypto_config_accel_ecc_no_bignum # - component_test_psa_crypto_config_reference_ecc_no_bignum config_psa_crypto_config_accel_ecc_no_bignum() { DRIVER_ONLY="$1" # start with full config for maximum coverage (also enables USE_PSA) helper_libtestdriver1_adjust_config "full" if [ "$DRIVER_ONLY" -eq 1 ]; then # Disable modules that are accelerated scripts/config.py unset MBEDTLS_ECDSA_C scripts/config.py unset MBEDTLS_ECDH_C scripts/config.py unset MBEDTLS_ECJPAKE_C # Disable ECP module (entirely) scripts/config.py unset MBEDTLS_ECP_C # Also disable bignum scripts/config.py unset MBEDTLS_BIGNUM_C fi # Disable all the features that auto-enable ECP_LIGHT (see build_info.h) scripts/config.py unset MBEDTLS_PK_PARSE_EC_EXTENDED scripts/config.py unset MBEDTLS_PK_PARSE_EC_COMPRESSED scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE # RSA support is intentionally disabled on this test because RSA_C depends # on BIGNUM_C. scripts/config.py -f "$CRYPTO_CONFIG_H" unset-all "PSA_WANT_KEY_TYPE_RSA_[0-9A-Z_a-z]*" scripts/config.py -f "$CRYPTO_CONFIG_H" unset-all "PSA_WANT_ALG_RSA_[0-9A-Z_a-z]*" scripts/config.py unset MBEDTLS_RSA_C scripts/config.py unset MBEDTLS_PKCS1_V15 scripts/config.py unset MBEDTLS_PKCS1_V21 scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT # Also disable key exchanges that depend on RSA scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED # Disable FFDH because it also depends on BIGNUM. scripts/config.py -f include/psa/crypto_config.h unset PSA_WANT_ALG_FFDH scripts/config.py -f "$CRYPTO_CONFIG_H" unset-all "PSA_WANT_KEY_TYPE_DH_[0-9A-Z_a-z]*" scripts/config.py unset MBEDTLS_DHM_C # Also disable key exchanges that depend on FFDH scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED # Restartable feature is not yet supported by PSA. Once it will in # the future, the following line could be removed (see issues # 6061, 6332 and following ones) scripts/config.py unset MBEDTLS_ECP_RESTARTABLE } # Build and test a configuration where driver accelerates all EC algs while # all support and dependencies from ECP and ECP_LIGHT are removed on the library # side. # # Keep in sync with component_test_psa_crypto_config_reference_ecc_no_bignum() component_test_psa_crypto_config_accel_ecc_no_bignum () { msg "build: full + accelerated EC algs + USE_PSA - ECP - BIGNUM" # Algorithms and key types to accelerate loc_accel_list="ALG_ECDSA ALG_DETERMINISTIC_ECDSA \ ALG_ECDH \ ALG_JPAKE \ KEY_TYPE_ECC_KEY_PAIR_BASIC \ KEY_TYPE_ECC_KEY_PAIR_IMPORT \ KEY_TYPE_ECC_KEY_PAIR_EXPORT \ KEY_TYPE_ECC_KEY_PAIR_GENERATE \ KEY_TYPE_ECC_PUBLIC_KEY" # Configure # --------- # Set common configurations between library's and driver's builds config_psa_crypto_config_accel_ecc_no_bignum 1 # Build # ----- # Things we wanted supported in libtestdriver1, but not accelerated in the main library: # SHA-1 and all SHA-2 variants, as they are used by ECDSA deterministic. loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512" helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list" helper_libtestdriver1_make_main "$loc_accel_list" # Make sure any built-in EC alg was not re-enabled by accident (additive config) not grep mbedtls_ecdsa_ library/ecdsa.o not grep mbedtls_ecdh_ library/ecdh.o not grep mbedtls_ecjpake_ library/ecjpake.o # Also ensure that ECP, RSA, DHM or BIGNUM modules were not re-enabled not grep mbedtls_ecp_ library/ecp.o not grep mbedtls_rsa_ library/rsa.o not grep mbedtls_dhm_ library/dhm.o not grep mbedtls_mpi_ library/bignum.o # Run the tests # ------------- msg "test suites: full + accelerated EC algs + USE_PSA - ECP - BIGNUM" make test # The following will be enabled in #7756 msg "ssl-opt: full + accelerated EC algs + USE_PSA - ECP - BIGNUM" tests/ssl-opt.sh } # Reference function used for driver's coverage analysis in analyze_outcomes.py # in conjunction with component_test_psa_crypto_config_accel_ecc_no_bignum(). # Keep in sync with its accelerated counterpart. component_test_psa_crypto_config_reference_ecc_no_bignum () { msg "build: full + non accelerated EC algs + USE_PSA" config_psa_crypto_config_accel_ecc_no_bignum 0 make msg "test suites: full + non accelerated EC algs + USE_PSA" make test # The following will be enabled in #7756 msg "ssl-opt: full + non accelerated EC algs + USE_PSA" tests/ssl-opt.sh } # Helper function used in: # - component_test_psa_crypto_config_accel_all_curves_except_p192 # - component_test_psa_crypto_config_accel_all_curves_except_x25519 # to build and test with all accelerated curves a part from the specified one. psa_crypto_config_accel_all_curves_except_one () { BUILTIN_CURVE=$1 msg "build: PSA_CRYPTO_CONFIG + all accelerated EC algs (excl $BUILTIN_CURVE) + USE_PSA_CRYPTO" # Accelerate all EC algs (all EC curves are automatically accelerated as # well in the built-in version due to the "PSA_WANT_xxx" symbols in # "crypto_config.h") loc_accel_list="ALG_ECDH \ ALG_ECDSA ALG_DETERMINISTIC_ECDSA \ ALG_JPAKE \ KEY_TYPE_ECC_KEY_PAIR_BASIC \ KEY_TYPE_ECC_KEY_PAIR_IMPORT \ KEY_TYPE_ECC_KEY_PAIR_EXPORT \ KEY_TYPE_ECC_KEY_PAIR_GENERATE \ KEY_TYPE_ECC_PUBLIC_KEY" # Configure # --------- helper_libtestdriver1_adjust_config "full" # restartable is not yet supported in PSA scripts/config.py unset MBEDTLS_ECP_RESTARTABLE # disable modules for which we have drivers scripts/config.py unset MBEDTLS_ECDSA_C scripts/config.py unset MBEDTLS_ECDH_C scripts/config.py unset MBEDTLS_ECJPAKE_C # Ensure also RSA and asssociated algs are disabled so that the size of # the public/private keys cannot be taken from there scripts/config.py unset MBEDTLS_RSA_C scripts/config.py unset MBEDTLS_PKCS1_V15 scripts/config.py unset MBEDTLS_PKCS1_V21 scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT # Disable RSA on the PSA side too scripts/config.py -f "$CRYPTO_CONFIG_H" unset-all "PSA_WANT_KEY_TYPE_RSA_[0-9A-Z_a-z]*" scripts/config.py -f "$CRYPTO_CONFIG_H" unset-all "PSA_WANT_ALG_RSA_[0-9A-Z_a-z]*" # Also disable key exchanges that depend on RSA scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED # Explicitly disable all SW implementation for elliptic curves scripts/config.py unset-all "MBEDTLS_ECP_DP_[0-9A-Z_a-z]*_ENABLED" # Just leave SW implementation for the specified curve for allowing to # build with ECP_C. scripts/config.py set $BUILTIN_CURVE # Accelerate all curves listed in "crypto_config.h" (skipping the ones that # are commented out). # Note: Those are handled in a special way by the libtestdriver machinery, # so we only want to include them in the accel list when building the main # libraries, hence the use of a separate variable. loc_curve_list="" for CURVE in $(sed -n 's/^#define PSA_WANT_\(ECC_[0-9A-Z_a-z]*\).*/\1/p' <"$CRYPTO_CONFIG_H"); do loc_curve_list="$loc_curve_list $CURVE" done # Build # ----- # These hashes are needed for some ECDSA signature tests. loc_extra_list="ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512" helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list" # (See above regarding loc_curve_list.) helper_libtestdriver1_make_main "$loc_accel_list $loc_curve_list" # make sure excluded modules were not auto-re-enabled by accident not grep mbedtls_ecdh_ library/ecdh.o not grep mbedtls_ecdsa_ library/ecdsa.o not grep mbedtls_ecjpake_ library/ecjpake.o if [ $BUILTIN_CURVE == "MBEDTLS_ECP_DP_SECP192R1_ENABLED" ]; then # The only built-in curve is Short Weierstrass, so ECP shouldn't have # support for Montgomery curves. Functions with mxz in their name # are specific to Montgomery curves. not grep mxz library/ecp.o elif [ $BUILTIN_CURVE == "MBEDTLS_ECP_DP_CURVE25519_ENABLED" ]; then # The only built-in curve is Montgomery, so ECP shouldn't have # support for Short Weierstrass curves. Functions with mbedtls_ecp_muladd # in their name are specific to Short Weierstrass curves. not grep mbedtls_ecp_muladd library/ecp.o else err_msg "Error: $BUILTIN_CURVE is not supported in psa_crypto_config_accel_all_curves_except_one()" exit 1 fi # Run the tests # ------------- msg "test: PSA_CRYPTO_CONFIG + all accelerated EC algs (excl $BUILTIN_CURVE) + USE_PSA_CRYPTO" make test } component_test_psa_crypto_config_accel_all_curves_except_p192 () { psa_crypto_config_accel_all_curves_except_one MBEDTLS_ECP_DP_SECP192R1_ENABLED } component_test_psa_crypto_config_accel_all_curves_except_x25519 () { psa_crypto_config_accel_all_curves_except_one MBEDTLS_ECP_DP_CURVE25519_ENABLED } # This is an helper used by: # - component_test_psa_ecc_key_pair_no_derive # - component_test_psa_ecc_key_pair_no_generate # The goal is to test with all PSA_WANT_KEY_TYPE_xxx_KEY_PAIR_yyy symbols # enabled, but one. Input arguments are as follows: # - $1 is the key type under test, i.e. ECC/RSA/DH # - $2 is the key option to be unset (i.e. generate, derive, etc) build_and_test_psa_want_key_pair_partial() { KEY_TYPE=$1 UNSET_OPTION=$2 DISABLED_PSA_WANT="PSA_WANT_KEY_TYPE_${KEY_TYPE}_KEY_PAIR_${UNSET_OPTION}" msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG - ${DISABLED_PSA_WANT}" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 # All the PSA_WANT_KEY_TYPE_xxx_KEY_PAIR_yyy are enabled by default in # crypto_config.h so we just disable the one we don't want. scripts/config.py -f "$CRYPTO_CONFIG_H" unset "$DISABLED_PSA_WANT" make CC=gcc CFLAGS="$ASAN_CFLAGS" LDFLAGS="$ASAN_CFLAGS" msg "test: full + MBEDTLS_PSA_CRYPTO_CONFIG - ${DISABLED_PSA_WANT}" make test } component_test_psa_ecc_key_pair_no_derive() { build_and_test_psa_want_key_pair_partial "ECC" "DERIVE" } component_test_psa_ecc_key_pair_no_generate() { build_and_test_psa_want_key_pair_partial "ECC" "GENERATE" } component_test_psa_crypto_config_accel_rsa_signature () { msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated RSA signature" loc_accel_list="ALG_RSA_PKCS1V15_SIGN ALG_RSA_PSS KEY_TYPE_RSA_KEY_PAIR KEY_TYPE_RSA_PUBLIC_KEY" # Configure # --------- # Start from default config (no TLS 1.3, no USE_PSA) helper_libtestdriver1_adjust_config "default" # It seems it is not possible to remove only the support for RSA signature # in the library. Thus we have to remove all RSA support (signature and # encryption/decryption). AS there is no driver support for asymmetric # encryption/decryption so far remove RSA encryption/decryption from the # application algorithm list. scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_OAEP scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT # Remove RSA support and its dependencies scripts/config.py unset MBEDTLS_RSA_C scripts/config.py unset MBEDTLS_PKCS1_V15 scripts/config.py unset MBEDTLS_PKCS1_V21 scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_ENABLED # Make sure both the library and the test library support the SHA hash # algorithms and only those ones (SHA256 is included by default). That way: # - the test library can compute the RSA signatures even in the case of a # composite RSA signature algorithm based on a SHA hash (no other hash # used in the unit tests). # - the dependency of RSA signature tests on PSA_WANT_ALG_SHA_xyz is # fulfilled as the hash SHA algorithm is supported by the library, and # thus the tests are run, not skipped. # - when testing a signature key with an algorithm wildcard built from # PSA_ALG_ANY_HASH as algorithm to test with the key, the chosen hash # algorithm based on the hashes supported by the library is also # supported by the test library. # Disable unwanted hashes here, we'll enable hashes we want in loc_extra_list. scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160_C scripts/config.py unset MBEDTLS_MD5_C scripts/config.py unset MBEDTLS_RIPEMD160_C # We need PEM parsing in the test library as well to support the import # of PEM encoded RSA keys. scripts/config.py -f "$CONFIG_TEST_DRIVER_H" set MBEDTLS_PEM_PARSE_C scripts/config.py -f "$CONFIG_TEST_DRIVER_H" set MBEDTLS_BASE64_C # Build # ----- # These hashes are needed for some RSA-PSS signature tests. loc_extra_list="ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512" helper_libtestdriver1_make_drivers "$loc_accel_list" "$loc_extra_list" helper_libtestdriver1_make_main "$loc_accel_list" # Make sure this was not re-enabled by accident (additive config) not grep mbedtls_rsa_rsassa_pkcs1_v15_sign library/rsa.o not grep mbedtls_rsa_rsassa_pss_sign_ext library/rsa.o # Run the tests # ------------- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated RSA signature" make test } # This is a temporary test to verify that full RSA support is present even when # only one single new symbols (PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC) is defined. component_test_new_psa_want_key_pair_symbol() { msg "Build: crypto config - MBEDTLS_RSA_C + PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC" # Create a temporary output file unless there is already one set if [ "$MBEDTLS_TEST_OUTCOME_FILE" ]; then REMOVE_OUTCOME_ON_EXIT="no" else REMOVE_OUTCOME_ON_EXIT="yes" MBEDTLS_TEST_OUTCOME_FILE="$PWD/out.csv" export MBEDTLS_TEST_OUTCOME_FILE fi # Start from crypto configuration scripts/config.py crypto # Remove RSA support and its dependencies scripts/config.py unset MBEDTLS_PKCS1_V15 scripts/config.py unset MBEDTLS_PKCS1_V21 scripts/config.py unset MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_RSA_ENABLED scripts/config.py unset MBEDTLS_RSA_C scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT # Enable PSA support scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG # Keep only PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC enabled in order to ensure # that proper translations is done in crypto_legacy.h. scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_IMPORT scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_EXPORT scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE make msg "Test: crypto config - MBEDTLS_RSA_C + PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC" make test # Parse only 1 relevant line from the outcome file, i.e. a test which is # performing RSA signature. msg "Verify that 'RSA PKCS1 Sign #1 (SHA512, 1536 bits RSA)' is PASS" cat $MBEDTLS_TEST_OUTCOME_FILE | grep 'RSA PKCS1 Sign #1 (SHA512, 1536 bits RSA)' | grep -q "PASS" if [ "$REMOVE_OUTCOME_ON_EXIT" == "yes" ]; then rm $MBEDTLS_TEST_OUTCOME_FILE fi } component_test_psa_crypto_config_accel_hash () { msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated hash" loc_accel_list="ALG_MD5 ALG_RIPEMD160 ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512" # Configure # --------- # Start from default config (no TLS 1.3, no USE_PSA) helper_libtestdriver1_adjust_config "default" # Disable the things that are being accelerated scripts/config.py unset MBEDTLS_MD5_C scripts/config.py unset MBEDTLS_RIPEMD160_C scripts/config.py unset MBEDTLS_SHA1_C scripts/config.py unset MBEDTLS_SHA224_C scripts/config.py unset MBEDTLS_SHA256_C scripts/config.py unset MBEDTLS_SHA384_C scripts/config.py unset MBEDTLS_SHA512_C # Build # ----- helper_libtestdriver1_make_drivers "$loc_accel_list" helper_libtestdriver1_make_main "$loc_accel_list" # There's a risk of something getting re-enabled via config_psa.h; # make sure it did not happen. Note: it's OK for MD_C to be enabled. not grep mbedtls_md5 library/md5.o not grep mbedtls_sha1 library/sha1.o not grep mbedtls_sha256 library/sha256.o not grep mbedtls_sha512 library/sha512.o not grep mbedtls_ripemd160 library/ripemd160.o # Run the tests # ------------- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated hash" make test } component_test_psa_crypto_config_accel_hash_keep_builtins () { msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated+builtin hash" # This component ensures that all the test cases for # md_psa_dynamic_dispatch with legacy+driver in test_suite_md are run. loc_accel_list="ALG_MD5 ALG_RIPEMD160 ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512" # Start from default config (no TLS 1.3, no USE_PSA) helper_libtestdriver1_adjust_config "default" helper_libtestdriver1_make_drivers "$loc_accel_list" helper_libtestdriver1_make_main "$loc_accel_list" msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated+builtin hash" make test } # Auxiliary function to build config for hashes with and without drivers config_psa_crypto_hash_use_psa () { DRIVER_ONLY="$1" # start with config full for maximum coverage (also enables USE_PSA) helper_libtestdriver1_adjust_config "full" if [ "$DRIVER_ONLY" -eq 1 ]; then # disable the built-in implementation of hashes scripts/config.py unset MBEDTLS_MD5_C scripts/config.py unset MBEDTLS_RIPEMD160_C scripts/config.py unset MBEDTLS_SHA1_C scripts/config.py unset MBEDTLS_SHA224_C scripts/config.py unset MBEDTLS_SHA256_C # see external RNG below scripts/config.py unset MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT scripts/config.py unset MBEDTLS_SHA384_C scripts/config.py unset MBEDTLS_SHA512_C scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT fi } # Note that component_test_psa_crypto_config_reference_hash_use_psa # is related to this component and both components need to be kept in sync. # For details please see comments for component_test_psa_crypto_config_reference_hash_use_psa. component_test_psa_crypto_config_accel_hash_use_psa () { msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated hash and USE_PSA" loc_accel_list="ALG_MD5 ALG_RIPEMD160 ALG_SHA_1 ALG_SHA_224 ALG_SHA_256 ALG_SHA_384 ALG_SHA_512" # Configure # --------- config_psa_crypto_hash_use_psa 1 # Build # ----- helper_libtestdriver1_make_drivers "$loc_accel_list" helper_libtestdriver1_make_main "$loc_accel_list" # There's a risk of something getting re-enabled via config_psa.h; # make sure it did not happen. Note: it's OK for MD_C to be enabled. not grep mbedtls_md5 library/md5.o not grep mbedtls_sha1 library/sha1.o not grep mbedtls_sha256 library/sha256.o not grep mbedtls_sha512 library/sha512.o not grep mbedtls_ripemd160 library/ripemd160.o # Run the tests # ------------- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated hash and USE_PSA" make test # This is mostly useful so that we can later compare outcome files with # the reference config in analyze_outcomes.py, to check that the # dependency declarations in ssl-opt.sh and in TLS code are correct. msg "test: ssl-opt.sh, MBEDTLS_PSA_CRYPTO_CONFIG with accelerated hash and USE_PSA" tests/ssl-opt.sh # This is to make sure all ciphersuites are exercised, but we don't need # interop testing (besides, we already got some from ssl-opt.sh). msg "test: compat.sh, MBEDTLS_PSA_CRYPTO_CONFIG with accelerated hash and USE_PSA" tests/compat.sh -p mbedTLS -V YES } # This component provides reference configuration for test_psa_crypto_config_accel_hash_use_psa # without accelerated hash. The outcome from both components are used by the analyze_outcomes.py # script to find regression in test coverage when accelerated hash is used (tests and ssl-opt). # Both components need to be kept in sync. component_test_psa_crypto_config_reference_hash_use_psa() { msg "test: MBEDTLS_PSA_CRYPTO_CONFIG without accelerated hash and USE_PSA" config_psa_crypto_hash_use_psa 0 make msg "test: MBEDTLS_PSA_CRYPTO_CONFIG without accelerated hash and USE_PSA" make test msg "test: ssl-opt.sh, MBEDTLS_PSA_CRYPTO_CONFIG without accelerated hash and USE_PSA" tests/ssl-opt.sh } component_test_psa_crypto_config_accel_cipher () { msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated cipher" loc_accel_list="ALG_CBC_NO_PADDING ALG_CBC_PKCS7 ALG_CTR ALG_CFB ALG_OFB ALG_XTS KEY_TYPE_DES" # Configure # --------- # Start from the default config (no TLS 1.3, no USE_PSA) helper_libtestdriver1_adjust_config "default" # There is no intended accelerator support for ALG CMAC. Therefore, asking # for it in the build implies the inclusion of the Mbed TLS cipher # operations. As we want to test here with cipher operations solely # supported by accelerators, disabled this PSA configuration option. # (Note: the same applies to STREAM_CIPHER and ECB_NO_PADDING, which are # already disabled by helper_libtestdriver1_adjust_config above.) scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CMAC # Disable the things that are being accelerated scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC scripts/config.py unset MBEDTLS_CIPHER_PADDING_PKCS7 scripts/config.py unset MBEDTLS_CIPHER_MODE_CTR scripts/config.py unset MBEDTLS_CIPHER_MODE_CFB scripts/config.py unset MBEDTLS_CIPHER_MODE_OFB scripts/config.py unset MBEDTLS_CIPHER_MODE_XTS scripts/config.py unset MBEDTLS_DES_C # Build # ----- helper_libtestdriver1_make_drivers "$loc_accel_list" helper_libtestdriver1_make_main "$loc_accel_list" # Make sure this was not re-enabled by accident (additive config) not grep mbedtls_des* library/des.o # Run the tests # ------------- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated cipher" make test } component_test_psa_crypto_config_accel_aead () { msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated AEAD" loc_accel_list="ALG_GCM ALG_CCM ALG_CHACHA20_POLY1305 KEY_TYPE_AES KEY_TYPE_CHACHA20 KEY_TYPE_ARIA KEY_TYPE_CAMELLIA" # Configure # --------- # Start from default config (no TLS 1.3, no USE_PSA) helper_libtestdriver1_adjust_config "default" # Disable things that are being accelerated scripts/config.py unset MBEDTLS_GCM_C scripts/config.py unset MBEDTLS_CCM_C scripts/config.py unset MBEDTLS_CHACHAPOLY_C # Features that depend on AEAD scripts/config.py unset MBEDTLS_SSL_CONTEXT_SERIALIZATION scripts/config.py unset MBEDTLS_SSL_TICKET_C # Build # ----- helper_libtestdriver1_make_drivers "$loc_accel_list" helper_libtestdriver1_make_main "$loc_accel_list" # Make sure this was not re-enabled by accident (additive config) not grep mbedtls_ccm library/ccm.o not grep mbedtls_gcm library/gcm.o not grep mbedtls_chachapoly library/chachapoly.o # Run the tests # ------------- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated AEAD" make test } component_test_psa_crypto_config_accel_pake() { msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated PAKE" loc_accel_list="ALG_JPAKE" # Configure # --------- helper_libtestdriver1_adjust_config "full" # Make build-in fallback not available scripts/config.py unset MBEDTLS_ECJPAKE_C scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED # Build # ----- helper_libtestdriver1_make_drivers "$loc_accel_list" helper_libtestdriver1_make_main "$loc_accel_list" # Make sure this was not re-enabled by accident (additive config) not grep mbedtls_ecjpake_init library/ecjpake.o # Run the tests # ------------- msg "test: MBEDTLS_PSA_CRYPTO_CONFIG with accelerated PAKE" make test } component_test_psa_crypto_config_chachapoly_disabled() { # full minus MBEDTLS_CHACHAPOLY_C without PSA_WANT_ALG_GCM and PSA_WANT_ALG_CHACHA20_POLY1305 msg "build: full minus MBEDTLS_CHACHAPOLY_C without PSA_WANT_ALG_GCM and PSA_WANT_ALG_CHACHA20_POLY1305" scripts/config.py full scripts/config.py unset MBEDTLS_CHACHAPOLY_C scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_GCM scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_CHACHA20_POLY1305 make CC=gcc CFLAGS="$ASAN_CFLAGS -O2" LDFLAGS="$ASAN_CFLAGS" msg "test: full minus MBEDTLS_CHACHAPOLY_C without PSA_WANT_ALG_GCM and PSA_WANT_ALG_CHACHA20_POLY1305" make test } component_test_ccm_aes_sha256() { msg "build: CCM + AES + SHA256 configuration" cp "$CONFIG_TEST_DRIVER_H" "$CONFIG_H" cp configs/crypto-config-ccm-aes-sha256.h "$CRYPTO_CONFIG_H" make CC=gcc msg "test: CCM + AES + SHA256 configuration" make test } # This should be renamed to test and updated once the accelerator ECDH code is in place and ready to test. component_build_psa_accel_alg_ecdh() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_ECDH # without MBEDTLS_ECDH_C msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_ECDH without MBEDTLS_ECDH_C" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py unset MBEDTLS_ECDH_C scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED scripts/config.py unset MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_ECDH -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator ECC key pair code is in place and ready to test. component_build_psa_accel_key_type_ecc_key_pair() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_xxx msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_xxx" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_BASIC 1 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_IMPORT 1 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_EXPORT 1 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_GENERATE 1 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE 1 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY 1 # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_KEY_PAIR -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator ECC public key code is in place and ready to test. component_build_psa_accel_key_type_ecc_public_key() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_ECC_PUBLIC_KEY 1 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_BASIC scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_IMPORT scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_EXPORT scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_GENERATE scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_KEY_TYPE_ECC_KEY_PAIR_DERIVE # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_KEY_TYPE_ECC_PUBLIC_KEY -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator HMAC code is in place and ready to test. component_build_psa_accel_alg_hmac() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_HMAC msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_HMAC" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_HMAC -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator HKDF code is in place and ready to test. component_build_psa_accel_alg_hkdf() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_HKDF # without MBEDTLS_HKDF_C msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_HKDF without MBEDTLS_HKDF_C" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py unset MBEDTLS_HKDF_C # Make sure to unset TLS1_3 since it requires HKDF_C and will not build properly without it. scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_HKDF -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator MD5 code is in place and ready to test. component_build_psa_accel_alg_md5() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_MD5 without other hashes msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_MD5 - other hashes" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS scripts/config.py unset MBEDTLS_LMS_C scripts/config.py unset MBEDTLS_LMS_PRIVATE # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_MD5 -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator RIPEMD160 code is in place and ready to test. component_build_psa_accel_alg_ripemd160() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_RIPEMD160 without other hashes msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_RIPEMD160 - other hashes" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS scripts/config.py unset MBEDTLS_LMS_C scripts/config.py unset MBEDTLS_LMS_PRIVATE # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RIPEMD160 -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator SHA1 code is in place and ready to test. component_build_psa_accel_alg_sha1() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_SHA_1 without other hashes msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_SHA_1 - other hashes" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS scripts/config.py unset MBEDTLS_LMS_C scripts/config.py unset MBEDTLS_LMS_PRIVATE # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_1 -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator SHA224 code is in place and ready to test. component_build_psa_accel_alg_sha224() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_SHA_224 without other hashes msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_SHA_224 - other hashes" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_224 -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator SHA256 code is in place and ready to test. component_build_psa_accel_alg_sha256() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_SHA_256 without other hashes msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_SHA_256 - other hashes" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_512 # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_256 -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator SHA384 code is in place and ready to test. component_build_psa_accel_alg_sha384() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_SHA_384 without other hashes msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_SHA_384 - other hashes" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS scripts/config.py unset MBEDTLS_LMS_C scripts/config.py unset MBEDTLS_LMS_PRIVATE # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_384 -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator SHA512 code is in place and ready to test. component_build_psa_accel_alg_sha512() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_SHA_512 without other hashes msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_SHA_512 - other hashes" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_MD5 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RIPEMD160 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_1 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_224 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_256 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_SHA_384 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_TLS12_ECJPAKE_TO_PMS scripts/config.py unset MBEDTLS_LMS_C scripts/config.py unset MBEDTLS_LMS_PRIVATE # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_SHA_512 -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator RSA code is in place and ready to test. component_build_psa_accel_alg_rsa_pkcs1v15_crypt() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_RSA_PKCS1V15_CRYPT msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_RSA_PKCS1V15_CRYPT + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PKCS1V15_CRYPT 1 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_SIGN scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_OAEP scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PSS # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_PKCS1V15_CRYPT -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator RSA code is in place and ready to test. component_build_psa_accel_alg_rsa_pkcs1v15_sign() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_RSA_PKCS1V15_SIGN and PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_RSA_PKCS1V15_SIGN + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PKCS1V15_SIGN 1 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_OAEP scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PSS # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_PKCS1V15_SIGN -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator RSA code is in place and ready to test. component_build_psa_accel_alg_rsa_oaep() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_RSA_OAEP and PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_RSA_OAEP + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_OAEP 1 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_SIGN scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PSS # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_OAEP -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator RSA code is in place and ready to test. component_build_psa_accel_alg_rsa_pss() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_ALG_RSA_PSS and PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_ALG_RSA_PSS + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PSS 1 scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_CRYPT scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_PKCS1V15_SIGN scripts/config.py -f "$CRYPTO_CONFIG_H" unset PSA_WANT_ALG_RSA_OAEP # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_ALG_RSA_PSS -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator RSA code is in place and ready to test. component_build_psa_accel_key_type_rsa_key_pair() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_xxx and PSA_WANT_ALG_RSA_PSS msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_xxx + PSA_WANT_ALG_RSA_PSS" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PSS 1 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_BASIC 1 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_IMPORT 1 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_EXPORT 1 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_KEY_PAIR_GENERATE 1 # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_KEY_PAIR -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } # This should be renamed to test and updated once the accelerator RSA code is in place and ready to test. component_build_psa_accel_key_type_rsa_public_key() { # full plus MBEDTLS_PSA_CRYPTO_CONFIG with PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY and PSA_WANT_ALG_RSA_PSS msg "build: full + MBEDTLS_PSA_CRYPTO_CONFIG + PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY + PSA_WANT_ALG_RSA_PSS" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG scripts/config.py unset MBEDTLS_USE_PSA_CRYPTO scripts/config.py unset MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_ALG_RSA_PSS 1 scripts/config.py -f "$CRYPTO_CONFIG_H" set PSA_WANT_KEY_TYPE_RSA_PUBLIC_KEY 1 # Need to define the correct symbol and include the test driver header path in order to build with the test driver make CC=gcc CFLAGS="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST -DMBEDTLS_PSA_ACCEL_KEY_TYPE_RSA_PUBLIC_KEY -I../tests/include -O2" LDFLAGS="$ASAN_CFLAGS" } support_build_tfm_armcc () { armc6_cc="$ARMC6_BIN_DIR/armclang" (check_tools "$armc6_cc" > /dev/null 2>&1) } component_build_tfm_armcc() { # test the TF-M configuration can build cleanly with various warning flags enabled cp configs/tfm_mbedcrypto_config_profile_medium.h "$CONFIG_H" cp configs/crypto_config_profile_medium.h "$CRYPTO_CONFIG_H" msg "build: TF-M config, armclang armv7-m thumb2" make clean armc6_build_test "--target=arm-arm-none-eabi -march=armv7-m -mthumb -Os -std=c99 -Werror -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wimplicit-fallthrough -Wshadow -Wvla -Wformat=2 -Wno-format-nonliteral -Wshadow -Wasm-operand-widths -Wunused" } component_build_tfm() { # test the TF-M configuration can build cleanly with various warning flags enabled cp configs/tfm_mbedcrypto_config_profile_medium.h "$CONFIG_H" cp configs/crypto_config_profile_medium.h "$CRYPTO_CONFIG_H" msg "build: TF-M config, clang, armv7-m thumb2" make lib CC="clang" CFLAGS="--target=arm-linux-gnueabihf -march=armv7-m -mthumb -Os -std=c99 -Werror -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wimplicit-fallthrough -Wshadow -Wvla -Wformat=2 -Wno-format-nonliteral -Wshadow -Wasm-operand-widths -Wunused" msg "build: TF-M config, gcc native build" make clean make lib CC="gcc" CFLAGS="-Os -std=c99 -Werror -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wshadow -Wvla -Wformat=2 -Wno-format-nonliteral -Wshadow -Wformat-signedness -Wlogical-op" } component_build_aes_variations() { # ~45s # aes.o has many #if defined(...) guards that intersect in complex ways. # Test that all the combinations build cleanly. The most common issue is # unused variables/functions, so ensure -Wunused is set. msg "build: aes.o for all combinations of relevant config options" for a in set unset; do for b in set unset; do for c in set unset; do for d in set unset; do for e in set unset; do for f in set unset; do for g in set unset; do echo ./scripts/config.py $a MBEDTLS_AES_SETKEY_ENC_ALT echo ./scripts/config.py $b MBEDTLS_AES_DECRYPT_ALT echo ./scripts/config.py $c MBEDTLS_AES_ROM_TABLES echo ./scripts/config.py $d MBEDTLS_AES_ENCRYPT_ALT echo ./scripts/config.py $e MBEDTLS_AES_SETKEY_DEC_ALT echo ./scripts/config.py $f MBEDTLS_AES_FEWER_TABLES echo ./scripts/config.py $g MBEDTLS_PADLOCK_C ./scripts/config.py $a MBEDTLS_AES_SETKEY_ENC_ALT ./scripts/config.py $b MBEDTLS_AES_DECRYPT_ALT ./scripts/config.py $c MBEDTLS_AES_ROM_TABLES ./scripts/config.py $d MBEDTLS_AES_ENCRYPT_ALT ./scripts/config.py $e MBEDTLS_AES_SETKEY_DEC_ALT ./scripts/config.py $f MBEDTLS_AES_FEWER_TABLES ./scripts/config.py $g MBEDTLS_PADLOCK_C rm -f library/aes.o make -C library aes.o CC="clang" CFLAGS="-O0 -std=c99 -Werror -Wall -Wextra -Wwrite-strings -Wpointer-arith -Wimplicit-fallthrough -Wshadow -Wvla -Wformat=2 -Wno-format-nonliteral -Wshadow -Wasm-operand-widths -Wunused" done done done done done done done } component_test_no_platform () { # Full configuration build, without platform support, file IO and net sockets. # This should catch missing mbedtls_printf definitions, and by disabling file # IO, it should catch missing '#include ' msg "build: full config except platform/fsio/net, make, gcc, C99" # ~ 30s scripts/config.py full scripts/config.py unset MBEDTLS_PLATFORM_C scripts/config.py unset MBEDTLS_NET_C scripts/config.py unset MBEDTLS_PLATFORM_MEMORY scripts/config.py unset MBEDTLS_PLATFORM_PRINTF_ALT scripts/config.py unset MBEDTLS_PLATFORM_FPRINTF_ALT scripts/config.py unset MBEDTLS_PLATFORM_SNPRINTF_ALT scripts/config.py unset MBEDTLS_PLATFORM_VSNPRINTF_ALT scripts/config.py unset MBEDTLS_PLATFORM_TIME_ALT scripts/config.py unset MBEDTLS_PLATFORM_EXIT_ALT scripts/config.py unset MBEDTLS_PLATFORM_SETBUF_ALT scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED scripts/config.py unset MBEDTLS_FS_IO scripts/config.py unset MBEDTLS_PSA_CRYPTO_SE_C scripts/config.py unset MBEDTLS_PSA_CRYPTO_STORAGE_C scripts/config.py unset MBEDTLS_PSA_ITS_FILE_C # Note, _DEFAULT_SOURCE needs to be defined for platforms using glibc version >2.19, # to re-enable platform integration features otherwise disabled in C99 builds make CC=gcc CFLAGS='-Werror -Wall -Wextra -std=c99 -pedantic -Os -D_DEFAULT_SOURCE' lib programs make CC=gcc CFLAGS='-Werror -Wall -Wextra -Os' test } component_build_no_std_function () { # catch compile bugs in _uninit functions msg "build: full config with NO_STD_FUNCTION, make, gcc" # ~ 30s scripts/config.py full scripts/config.py set MBEDTLS_PLATFORM_NO_STD_FUNCTIONS scripts/config.py unset MBEDTLS_ENTROPY_NV_SEED scripts/config.py unset MBEDTLS_PLATFORM_NV_SEED_ALT CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Check . make } component_build_no_ssl_srv () { msg "build: full config except SSL server, make, gcc" # ~ 30s scripts/config.py full scripts/config.py unset MBEDTLS_SSL_SRV_C make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1' } component_build_no_ssl_cli () { msg "build: full config except SSL client, make, gcc" # ~ 30s scripts/config.py full scripts/config.py unset MBEDTLS_SSL_CLI_C make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1' } component_build_no_sockets () { # Note, C99 compliance can also be tested with the sockets support disabled, # as that requires a POSIX platform (which isn't the same as C99). msg "build: full config except net_sockets.c, make, gcc -std=c99 -pedantic" # ~ 30s scripts/config.py full scripts/config.py unset MBEDTLS_NET_C # getaddrinfo() undeclared, etc. scripts/config.py set MBEDTLS_NO_PLATFORM_ENTROPY # uses syscall() on GNU/Linux make CC=gcc CFLAGS='-Werror -Wall -Wextra -O1 -std=c99 -pedantic' lib } component_test_memory_buffer_allocator_backtrace () { msg "build: default config with memory buffer allocator and backtrace enabled" scripts/config.py set MBEDTLS_MEMORY_BUFFER_ALLOC_C scripts/config.py set MBEDTLS_PLATFORM_MEMORY scripts/config.py set MBEDTLS_MEMORY_BACKTRACE scripts/config.py set MBEDTLS_MEMORY_DEBUG CC=gcc cmake -DCMAKE_BUILD_TYPE:String=Release . make msg "test: MBEDTLS_MEMORY_BUFFER_ALLOC_C and MBEDTLS_MEMORY_BACKTRACE" make test } component_test_memory_buffer_allocator () { msg "build: default config with memory buffer allocator" scripts/config.py set MBEDTLS_MEMORY_BUFFER_ALLOC_C scripts/config.py set MBEDTLS_PLATFORM_MEMORY CC=gcc cmake -DCMAKE_BUILD_TYPE:String=Release . make msg "test: MBEDTLS_MEMORY_BUFFER_ALLOC_C" make test msg "test: ssl-opt.sh, MBEDTLS_MEMORY_BUFFER_ALLOC_C" # MBEDTLS_MEMORY_BUFFER_ALLOC is slow. Skip tests that tend to time out. tests/ssl-opt.sh -e '^DTLS proxy' } component_test_no_max_fragment_length () { # Run max fragment length tests with MFL disabled msg "build: default config except MFL extension (ASan build)" # ~ 30s scripts/config.py unset MBEDTLS_SSL_MAX_FRAGMENT_LENGTH CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: ssl-opt.sh, MFL-related tests" tests/ssl-opt.sh -f "Max fragment length" } component_test_asan_remove_peer_certificate () { msg "build: default config with MBEDTLS_SSL_KEEP_PEER_CERTIFICATE disabled (ASan build)" scripts/config.py unset MBEDTLS_SSL_KEEP_PEER_CERTIFICATE CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE" make test msg "test: ssl-opt.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE" tests/ssl-opt.sh msg "test: compat.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE" tests/compat.sh msg "test: context-info.sh, !MBEDTLS_SSL_KEEP_PEER_CERTIFICATE" tests/context-info.sh } component_test_no_max_fragment_length_small_ssl_out_content_len () { msg "build: no MFL extension, small SSL_OUT_CONTENT_LEN (ASan build)" scripts/config.py unset MBEDTLS_SSL_MAX_FRAGMENT_LENGTH scripts/config.py set MBEDTLS_SSL_IN_CONTENT_LEN 16384 scripts/config.py set MBEDTLS_SSL_OUT_CONTENT_LEN 4096 CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: MFL tests (disabled MFL extension case) & large packet tests" tests/ssl-opt.sh -f "Max fragment length\|Large buffer" msg "test: context-info.sh (disabled MFL extension case)" tests/context-info.sh } component_test_variable_ssl_in_out_buffer_len () { msg "build: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled (ASan build)" scripts/config.py set MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled" make test msg "test: ssl-opt.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled" tests/ssl-opt.sh msg "test: compat.sh, MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH enabled" tests/compat.sh } component_test_dtls_cid_legacy () { msg "build: MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy) enabled (ASan build)" scripts/config.py set MBEDTLS_SSL_DTLS_CONNECTION_ID_COMPAT 1 CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy)" make test msg "test: ssl-opt.sh, MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy) enabled" tests/ssl-opt.sh msg "test: compat.sh, MBEDTLS_SSL_DTLS_CONNECTION_ID (legacy) enabled" tests/compat.sh } component_test_ssl_alloc_buffer_and_mfl () { msg "build: default config with memory buffer allocator and MFL extension" scripts/config.py set MBEDTLS_MEMORY_BUFFER_ALLOC_C scripts/config.py set MBEDTLS_PLATFORM_MEMORY scripts/config.py set MBEDTLS_MEMORY_DEBUG scripts/config.py set MBEDTLS_SSL_MAX_FRAGMENT_LENGTH scripts/config.py set MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH CC=gcc cmake -DCMAKE_BUILD_TYPE:String=Release . make msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH, MBEDTLS_MEMORY_BUFFER_ALLOC_C, MBEDTLS_MEMORY_DEBUG and MBEDTLS_SSL_MAX_FRAGMENT_LENGTH" make test msg "test: MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH, MBEDTLS_MEMORY_BUFFER_ALLOC_C, MBEDTLS_MEMORY_DEBUG and MBEDTLS_SSL_MAX_FRAGMENT_LENGTH" tests/ssl-opt.sh -f "Handshake memory usage" } component_test_when_no_ciphersuites_have_mac () { msg "build: when no ciphersuites have MAC" scripts/config.py unset MBEDTLS_CIPHER_NULL_CIPHER scripts/config.py unset MBEDTLS_CIPHER_MODE_CBC scripts/config.py unset MBEDTLS_CMAC_C make msg "test: !MBEDTLS_SSL_SOME_MODES_USE_MAC" make test msg "test ssl-opt.sh: !MBEDTLS_SSL_SOME_MODES_USE_MAC" tests/ssl-opt.sh -f 'Default\|EtM' -e 'without EtM' } component_test_no_date_time () { msg "build: default config without MBEDTLS_HAVE_TIME_DATE" scripts/config.py unset MBEDTLS_HAVE_TIME_DATE CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Check . make msg "test: !MBEDTLS_HAVE_TIME_DATE - main suites" make test } component_test_platform_calloc_macro () { msg "build: MBEDTLS_PLATFORM_{CALLOC/FREE}_MACRO enabled (ASan build)" scripts/config.py set MBEDTLS_PLATFORM_MEMORY scripts/config.py set MBEDTLS_PLATFORM_CALLOC_MACRO calloc scripts/config.py set MBEDTLS_PLATFORM_FREE_MACRO free CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: MBEDTLS_PLATFORM_{CALLOC/FREE}_MACRO enabled (ASan build)" make test } component_test_malloc_0_null () { msg "build: malloc(0) returns NULL (ASan+UBSan build)" scripts/config.py full make CC=gcc CFLAGS="'-DMBEDTLS_CONFIG_FILE=\"$PWD/tests/configs/config-wrapper-malloc-0-null.h\"' $ASAN_CFLAGS -O" LDFLAGS="$ASAN_CFLAGS" msg "test: malloc(0) returns NULL (ASan+UBSan build)" make test msg "selftest: malloc(0) returns NULL (ASan+UBSan build)" # Just the calloc selftest. "make test" ran the others as part of the # test suites. programs/test/selftest calloc msg "test ssl-opt.sh: malloc(0) returns NULL (ASan+UBSan build)" # Run a subset of the tests. The choice is a balance between coverage # and time (including time indirectly wasted due to flaky tests). # The current choice is to skip tests whose description includes # "proxy", which is an approximation of skipping tests that use the # UDP proxy, which tend to be slower and flakier. tests/ssl-opt.sh -e 'proxy' } support_test_aesni() { # Check that gcc targets x86_64 (we can build AESNI), and check for # AESNI support on the host (we can run AESNI). # # The name of this function is possibly slightly misleading, but needs to align # with the name of the corresponding test, component_test_aesni. # # In principle 32-bit x86 can support AESNI, but our implementation does not # support 32-bit x86, so we check for x86-64. # We can only grep /proc/cpuinfo on Linux, so this also checks for Linux (gcc -v 2>&1 | grep Target | grep -q x86_64) && [[ "$HOSTTYPE" == "x86_64" && "$OSTYPE" == "linux-gnu" ]] && (lscpu | grep -qw aes) } component_test_aesni () { # ~ 60s # This tests the two AESNI implementations (intrinsics and assembly), and also the plain C # fallback. It also tests the logic that is used to select which implementation(s) to build. # # This test does not require the host to have support for AESNI (if it doesn't, the run-time # AESNI detection will fallback to the plain C implementation, so the tests will instead # exercise the plain C impl). msg "build: default config with different AES implementations" scripts/config.py set MBEDTLS_AESNI_C scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY scripts/config.py set MBEDTLS_HAVE_ASM # test the intrinsics implementation msg "AES tests, test intrinsics" make clean make CC=gcc CFLAGS='-Werror -Wall -Wextra -mpclmul -msse2 -maes' # check that we built intrinsics - this should be used by default when supported by the compiler ./programs/test/selftest aes | grep "AESNI code" | grep -q "intrinsics" # test the asm implementation msg "AES tests, test assembly" make clean make CC=gcc CFLAGS='-Werror -Wall -Wextra -mno-pclmul -mno-sse2 -mno-aes' # check that we built assembly - this should be built if the compiler does not support intrinsics ./programs/test/selftest aes | grep "AESNI code" | grep -q "assembly" # test the plain C implementation scripts/config.py unset MBEDTLS_AESNI_C scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY msg "AES tests, plain C" make clean make CC=gcc CFLAGS='-O2 -Werror' # check that there is no AESNI code present ./programs/test/selftest aes | not grep -q "AESNI code" not grep -q "AES note: using AESNI" ./programs/test/selftest grep -q "AES note: built-in implementation." ./programs/test/selftest # test the intrinsics implementation scripts/config.py set MBEDTLS_AESNI_C scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY msg "AES tests, test AESNI only" make clean make CC=gcc CFLAGS='-Werror -Wall -Wextra -mpclmul -msse2 -maes' ./programs/test/selftest aes | grep -q "AES note: using AESNI" ./programs/test/selftest aes | not grep -q "AES note: built-in implementation." grep -q "AES note: using AESNI" ./programs/test/selftest not grep -q "AES note: built-in implementation." ./programs/test/selftest } support_test_aesni_m32() { support_test_m32_o0 && (lscpu | grep -qw aes) } component_test_aesni_m32 () { # ~ 60s # This tests are duplicated from component_test_aesni for i386 target # # AESNI intrinsic code supports i386 and assembly code does not support it. msg "build: default config with different AES implementations" scripts/config.py set MBEDTLS_AESNI_C scripts/config.py set MBEDTLS_PADLOCK_C scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY scripts/config.py set MBEDTLS_HAVE_ASM # test the intrinsics implementation msg "AES tests, test intrinsics" make clean make CC=gcc CFLAGS='-m32 -Werror -Wall -Wextra -mpclmul -msse2 -maes' LDFLAGS='-m32' # check that we built intrinsics - this should be used by default when supported by the compiler ./programs/test/selftest aes | grep "AESNI code" | grep -q "intrinsics" grep -q "AES note: using AESNI" ./programs/test/selftest grep -q "AES note: built-in implementation." ./programs/test/selftest grep -q "AES note: using VIA Padlock" ./programs/test/selftest grep -q mbedtls_aesni_has_support ./programs/test/selftest scripts/config.py set MBEDTLS_AESNI_C scripts/config.py unset MBEDTLS_PADLOCK_C scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY msg "AES tests, test AESNI only" make clean make CC=gcc CFLAGS='-m32 -Werror -Wall -Wextra -mpclmul -msse2 -maes' LDFLAGS='-m32' ./programs/test/selftest aes | grep -q "AES note: using AESNI" ./programs/test/selftest aes | not grep -q "AES note: built-in implementation." grep -q "AES note: using AESNI" ./programs/test/selftest not grep -q "AES note: built-in implementation." ./programs/test/selftest not grep -q "AES note: using VIA Padlock" ./programs/test/selftest not grep -q mbedtls_aesni_has_support ./programs/test/selftest } # For timebeing, no aarch64 gcc available in CI and no arm64 CI node. component_build_aes_aesce_armcc () { msg "Build: AESCE test on arm64 platform without plain C." scripts/config.py baremetal # armc[56] don't support SHA-512 intrinsics scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT # Stop armclang warning about feature detection for A64_CRYPTO. # With this enabled, the library does build correctly under armclang, # but in baremetal builds (as tested here), feature detection is # unavailable, and the user is notified via a #warning. So enabling # this feature would prevent us from building with -Werror on # armclang. Tracked in #7198. scripts/config.py unset MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT scripts/config.py set MBEDTLS_HAVE_ASM msg "AESCE, build with default configuration." scripts/config.py set MBEDTLS_AESCE_C scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto" msg "AESCE, build AESCE only" scripts/config.py set MBEDTLS_AESCE_C scripts/config.py set MBEDTLS_AES_USE_HARDWARE_ONLY armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8-a+crypto" } # For timebeing, no VIA Padlock platform available. component_build_aes_via_padlock () { msg "AES:VIA PadLock, build with default configuration." scripts/config.py unset MBEDTLS_AESNI_C scripts/config.py set MBEDTLS_PADLOCK_C scripts/config.py unset MBEDTLS_AES_USE_HARDWARE_ONLY make CC=gcc CFLAGS="$ASAN_CFLAGS -m32 -O2" LDFLAGS="-m32 $ASAN_CFLAGS" grep -q mbedtls_padlock_has_support ./programs/test/selftest } support_build_aes_via_padlock_only () { ( [ "$MBEDTLS_TEST_PLATFORM" == "Linux-x86_64" ] || \ [ "$MBEDTLS_TEST_PLATFORM" == "Linux-amd64" ] ) && \ [ "`dpkg --print-foreign-architectures`" == "i386" ] } support_build_aes_aesce_armcc () { support_build_armcc } component_test_aes_only_128_bit_keys () { msg "build: default config + AES_ONLY_128_BIT_KEY_LENGTH" scripts/config.py set MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH scripts/config.py unset MBEDTLS_PADLOCK_C make CC=gcc CFLAGS='-Werror -Wall -Wextra' msg "test: default config + AES_ONLY_128_BIT_KEY_LENGTH" make test } component_test_no_ctr_drbg_aes_only_128_bit_keys () { msg "build: default config + AES_ONLY_128_BIT_KEY_LENGTH - CTR_DRBG_C" scripts/config.py set MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH scripts/config.py unset MBEDTLS_CTR_DRBG_C scripts/config.py unset MBEDTLS_PADLOCK_C make CC=clang CFLAGS='-Werror -Wall -Wextra' msg "test: default config + AES_ONLY_128_BIT_KEY_LENGTH - CTR_DRBG_C" make test } component_test_aes_only_128_bit_keys_have_builtins () { msg "build: default config + AES_ONLY_128_BIT_KEY_LENGTH - AESNI_C - AESCE_C" scripts/config.py set MBEDTLS_AES_ONLY_128_BIT_KEY_LENGTH scripts/config.py unset MBEDTLS_PADLOCK_C scripts/config.py unset MBEDTLS_AESNI_C scripts/config.py unset MBEDTLS_AESCE_C make CC=gcc CFLAGS='-Werror -Wall -Wextra' msg "test: default config + AES_ONLY_128_BIT_KEY_LENGTH - AESNI_C - AESCE_C" make test msg "selftest: default config + AES_ONLY_128_BIT_KEY_LENGTH - AESNI_C - AESCE_C" programs/test/selftest } component_test_aes_fewer_tables () { msg "build: default config with AES_FEWER_TABLES enabled" scripts/config.py set MBEDTLS_AES_FEWER_TABLES make CC=gcc CFLAGS='-Werror -Wall -Wextra' msg "test: AES_FEWER_TABLES" make test } component_test_aes_rom_tables () { msg "build: default config with AES_ROM_TABLES enabled" scripts/config.py set MBEDTLS_AES_ROM_TABLES make CC=gcc CFLAGS='-Werror -Wall -Wextra' msg "test: AES_ROM_TABLES" make test } component_test_aes_fewer_tables_and_rom_tables () { msg "build: default config with AES_ROM_TABLES and AES_FEWER_TABLES enabled" scripts/config.py set MBEDTLS_AES_FEWER_TABLES scripts/config.py set MBEDTLS_AES_ROM_TABLES make CC=gcc CFLAGS='-Werror -Wall -Wextra' msg "test: AES_FEWER_TABLES + AES_ROM_TABLES" make test } component_test_ctr_drbg_aes_256_sha_256 () { msg "build: full + MBEDTLS_ENTROPY_FORCE_SHA256 (ASan build)" scripts/config.py full scripts/config.py unset MBEDTLS_MEMORY_BUFFER_ALLOC_C scripts/config.py set MBEDTLS_ENTROPY_FORCE_SHA256 CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: full + MBEDTLS_ENTROPY_FORCE_SHA256 (ASan build)" make test } component_test_ctr_drbg_aes_128_sha_512 () { msg "build: full + MBEDTLS_CTR_DRBG_USE_128_BIT_KEY (ASan build)" scripts/config.py full scripts/config.py unset MBEDTLS_MEMORY_BUFFER_ALLOC_C scripts/config.py set MBEDTLS_CTR_DRBG_USE_128_BIT_KEY CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: full + MBEDTLS_CTR_DRBG_USE_128_BIT_KEY (ASan build)" make test } component_test_ctr_drbg_aes_128_sha_256 () { msg "build: full + MBEDTLS_CTR_DRBG_USE_128_BIT_KEY + MBEDTLS_ENTROPY_FORCE_SHA256 (ASan build)" scripts/config.py full scripts/config.py unset MBEDTLS_MEMORY_BUFFER_ALLOC_C scripts/config.py set MBEDTLS_CTR_DRBG_USE_128_BIT_KEY scripts/config.py set MBEDTLS_ENTROPY_FORCE_SHA256 CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: full + MBEDTLS_CTR_DRBG_USE_128_BIT_KEY + MBEDTLS_ENTROPY_FORCE_SHA256 (ASan build)" make test } component_test_se_default () { msg "build: default config + MBEDTLS_PSA_CRYPTO_SE_C" scripts/config.py set MBEDTLS_PSA_CRYPTO_SE_C make CC=clang CFLAGS="$ASAN_CFLAGS -Os" LDFLAGS="$ASAN_CFLAGS" msg "test: default config + MBEDTLS_PSA_CRYPTO_SE_C" make test } component_test_psa_crypto_drivers () { msg "build: full + MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS + test drivers" scripts/config.py full scripts/config.py set MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS loc_cflags="$ASAN_CFLAGS -DPSA_CRYPTO_DRIVER_TEST_ALL" loc_cflags="${loc_cflags} '-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/user-config-for-test.h\"'" loc_cflags="${loc_cflags} -I../tests/include -O2" make CC=gcc CFLAGS="${loc_cflags}" LDFLAGS="$ASAN_CFLAGS" msg "test: full + MBEDTLS_PSA_CRYPTO_BUILTIN_KEYS + test drivers" make test } component_test_make_shared () { msg "build/test: make shared" # ~ 40s make SHARED=1 all check ldd programs/util/strerror | grep libmbedcrypto programs/test/dlopen_demo.sh } component_test_cmake_shared () { msg "build/test: cmake shared" # ~ 2min cmake -DUSE_SHARED_MBEDTLS_LIBRARY=On . make ldd programs/util/strerror | grep libmbedcrypto make test programs/test/dlopen_demo.sh } test_build_opt () { info=$1 cc=$2; shift 2 $cc --version for opt in "$@"; do msg "build/test: $cc $opt, $info" # ~ 30s make CC="$cc" CFLAGS="$opt -std=c99 -pedantic -Wall -Wextra -Werror" # We're confident enough in compilers to not run _all_ the tests, # but at least run the unit tests. In particular, runs with # optimizations use inline assembly whereas runs with -O0 # skip inline assembly. make test # ~30s make clean done } # For FreeBSD we invoke the function by name so this condition is added # to disable the existing test_clang_opt function for linux. if [[ $(uname) != "Linux" ]]; then component_test_clang_opt () { scripts/config.py full test_build_opt 'full config' clang -O0 -Os -O2 } fi component_test_clang_latest_opt () { scripts/config.py full test_build_opt 'full config' "$CLANG_LATEST" -O0 -Os -O2 } support_test_clang_latest_opt () { type "$CLANG_LATEST" >/dev/null 2>/dev/null } component_test_clang_earliest_opt () { scripts/config.py full test_build_opt 'full config' "$CLANG_EARLIEST" -O0 } support_test_clang_earliest_opt () { type "$CLANG_EARLIEST" >/dev/null 2>/dev/null } component_test_gcc_latest_opt () { scripts/config.py full test_build_opt 'full config' "$GCC_LATEST" -O0 -Os -O2 } support_test_gcc_latest_opt () { type "$GCC_LATEST" >/dev/null 2>/dev/null } component_test_gcc_earliest_opt () { scripts/config.py full test_build_opt 'full config' "$GCC_EARLIEST" -O0 } support_test_gcc_earliest_opt () { type "$GCC_EARLIEST" >/dev/null 2>/dev/null } component_build_mbedtls_config_file () { msg "build: make with MBEDTLS_CONFIG_FILE" # ~40s scripts/config.py -w full_config.h full echo '#error "MBEDTLS_CONFIG_FILE is not working"' >"$CONFIG_H" make CFLAGS="-I '$PWD' -DMBEDTLS_CONFIG_FILE='\"full_config.h\"'" # Make sure this feature is enabled. We'll disable it in the next phase. programs/test/query_compile_time_config MBEDTLS_NIST_KW_C make clean msg "build: make with MBEDTLS_CONFIG_FILE + MBEDTLS_USER_CONFIG_FILE" # In the user config, disable one feature (for simplicity, pick a feature # that nothing else depends on). echo '#undef MBEDTLS_NIST_KW_C' >user_config.h make CFLAGS="-I '$PWD' -DMBEDTLS_CONFIG_FILE='\"full_config.h\"' -DMBEDTLS_USER_CONFIG_FILE='\"user_config.h\"'" not programs/test/query_compile_time_config MBEDTLS_NIST_KW_C rm -f user_config.h full_config.h } component_build_psa_config_file () { msg "build: make with MBEDTLS_PSA_CRYPTO_CONFIG_FILE" # ~40s scripts/config.py set MBEDTLS_PSA_CRYPTO_CONFIG cp "$CRYPTO_CONFIG_H" psa_test_config.h echo '#error "MBEDTLS_PSA_CRYPTO_CONFIG_FILE is not working"' >"$CRYPTO_CONFIG_H" make CFLAGS="-I '$PWD' -DMBEDTLS_PSA_CRYPTO_CONFIG_FILE='\"psa_test_config.h\"'" # Make sure this feature is enabled. We'll disable it in the next phase. programs/test/query_compile_time_config MBEDTLS_CMAC_C make clean msg "build: make with MBEDTLS_PSA_CRYPTO_CONFIG_FILE + MBEDTLS_PSA_CRYPTO_USER_CONFIG_FILE" # ~40s # In the user config, disable one feature, which will reflect on the # mbedtls configuration so we can query it with query_compile_time_config. echo '#undef PSA_WANT_ALG_CMAC' >psa_user_config.h scripts/config.py unset MBEDTLS_CMAC_C make CFLAGS="-I '$PWD' -DMBEDTLS_PSA_CRYPTO_CONFIG_FILE='\"psa_test_config.h\"' -DMBEDTLS_PSA_CRYPTO_USER_CONFIG_FILE='\"psa_user_config.h\"'" not programs/test/query_compile_time_config MBEDTLS_CMAC_C rm -f psa_test_config.h psa_user_config.h } component_build_psa_alt_headers () { msg "build: make with PSA alt headers" # ~20s # Generate alternative versions of the substitutable headers with the # same content except different include guards. make -C tests include/alt-extra/psa/crypto_platform_alt.h include/alt-extra/psa/crypto_struct_alt.h # Build the library and some programs. # Don't build the fuzzers to avoid having to go through hoops to set # a correct include path for programs/fuzz/Makefile. make CFLAGS="-I ../tests/include/alt-extra -DMBEDTLS_PSA_CRYPTO_PLATFORM_FILE='\"psa/crypto_platform_alt.h\"' -DMBEDTLS_PSA_CRYPTO_STRUCT_FILE='\"psa/crypto_struct_alt.h\"'" lib make -C programs -o fuzz CFLAGS="-I ../tests/include/alt-extra -DMBEDTLS_PSA_CRYPTO_PLATFORM_FILE='\"psa/crypto_platform_alt.h\"' -DMBEDTLS_PSA_CRYPTO_STRUCT_FILE='\"psa/crypto_struct_alt.h\"'" # Check that we're getting the alternative include guards and not the # original include guards. programs/test/query_included_headers | grep -x PSA_CRYPTO_PLATFORM_ALT_H programs/test/query_included_headers | grep -x PSA_CRYPTO_STRUCT_ALT_H programs/test/query_included_headers | not grep -x PSA_CRYPTO_PLATFORM_H programs/test/query_included_headers | not grep -x PSA_CRYPTO_STRUCT_H } component_test_m32_o0 () { # Build without optimization, so as to use portable C code (in a 32-bit # build) and not the i386-specific inline assembly. msg "build: i386, make, gcc -O0 (ASan build)" # ~ 30s scripts/config.py full scripts/config.py unset MBEDTLS_AESNI_C # AESNI depends on cpu modifiers make CC=gcc CFLAGS="$ASAN_CFLAGS -m32 -O0" LDFLAGS="-m32 $ASAN_CFLAGS" msg "test: i386, make, gcc -O0 (ASan build)" make test } support_test_m32_o0 () { case $(uname -m) in amd64|x86_64) true;; *) false;; esac } component_test_m32_o2 () { # Build with optimization, to use the i386 specific inline assembly # and go faster for tests. msg "build: i386, make, gcc -O2 (ASan build)" # ~ 30s scripts/config.py full scripts/config.py unset MBEDTLS_AESNI_C # AESNI depends on cpu modifiers make CC=gcc CFLAGS="$ASAN_CFLAGS -m32 -O2" LDFLAGS="-m32 $ASAN_CFLAGS" msg "test: i386, make, gcc -O2 (ASan build)" make test msg "test ssl-opt.sh, i386, make, gcc-O2" tests/ssl-opt.sh } support_test_m32_o2 () { support_test_m32_o0 "$@" } component_test_m32_everest () { msg "build: i386, Everest ECDH context (ASan build)" # ~ 6 min scripts/config.py set MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED scripts/config.py unset MBEDTLS_AESNI_C # AESNI depends on cpu modifiers make CC=gcc CFLAGS="$ASAN_CFLAGS -m32 -O2" LDFLAGS="-m32 $ASAN_CFLAGS" msg "test: i386, Everest ECDH context - main suites (inc. selftests) (ASan build)" # ~ 50s make test msg "test: i386, Everest ECDH context - ECDH-related part of ssl-opt.sh (ASan build)" # ~ 5s tests/ssl-opt.sh -f ECDH msg "test: i386, Everest ECDH context - compat.sh with some ECDH ciphersuites (ASan build)" # ~ 3 min # Exclude some symmetric ciphers that are redundant here to gain time. tests/compat.sh -f ECDH -V NO -e 'ARIA\|CAMELLIA\|CHACHA' } support_test_m32_everest () { support_test_m32_o0 "$@" } component_test_mx32 () { msg "build: 64-bit ILP32, make, gcc" # ~ 30s scripts/config.py full make CC=gcc CFLAGS='-Werror -Wall -Wextra -mx32' LDFLAGS='-mx32' msg "test: 64-bit ILP32, make, gcc" make test } support_test_mx32 () { case $(uname -m) in amd64|x86_64) true;; *) false;; esac } component_test_min_mpi_window_size () { msg "build: Default + MBEDTLS_MPI_WINDOW_SIZE=1 (ASan build)" # ~ 10s scripts/config.py set MBEDTLS_MPI_WINDOW_SIZE 1 CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: MBEDTLS_MPI_WINDOW_SIZE=1 - main suites (inc. selftests) (ASan build)" # ~ 10s make test } component_test_have_int32 () { msg "build: gcc, force 32-bit bignum limbs" scripts/config.py unset MBEDTLS_HAVE_ASM scripts/config.py unset MBEDTLS_AESNI_C scripts/config.py unset MBEDTLS_PADLOCK_C scripts/config.py unset MBEDTLS_AESCE_C make CC=gcc CFLAGS='-Werror -Wall -Wextra -DMBEDTLS_HAVE_INT32' msg "test: gcc, force 32-bit bignum limbs" make test } component_test_have_int64 () { msg "build: gcc, force 64-bit bignum limbs" scripts/config.py unset MBEDTLS_HAVE_ASM scripts/config.py unset MBEDTLS_AESNI_C scripts/config.py unset MBEDTLS_PADLOCK_C scripts/config.py unset MBEDTLS_AESCE_C make CC=gcc CFLAGS='-Werror -Wall -Wextra -DMBEDTLS_HAVE_INT64' msg "test: gcc, force 64-bit bignum limbs" make test } component_test_have_int32_cmake_new_bignum () { msg "build: gcc, force 32-bit bignum limbs, new bignum interface, test hooks (ASan build)" scripts/config.py unset MBEDTLS_HAVE_ASM scripts/config.py unset MBEDTLS_AESNI_C scripts/config.py unset MBEDTLS_PADLOCK_C scripts/config.py unset MBEDTLS_AESCE_C scripts/config.py set MBEDTLS_TEST_HOOKS scripts/config.py set MBEDTLS_ECP_WITH_MPI_UINT make CC=gcc CFLAGS="$ASAN_CFLAGS -Werror -Wall -Wextra -DMBEDTLS_HAVE_INT32" LDFLAGS="$ASAN_CFLAGS" msg "test: gcc, force 32-bit bignum limbs, new bignum interface, test hooks (ASan build)" make test } component_test_no_udbl_division () { msg "build: MBEDTLS_NO_UDBL_DIVISION native" # ~ 10s scripts/config.py full scripts/config.py set MBEDTLS_NO_UDBL_DIVISION make CFLAGS='-Werror -O1' msg "test: MBEDTLS_NO_UDBL_DIVISION native" # ~ 10s make test } component_test_no_64bit_multiplication () { msg "build: MBEDTLS_NO_64BIT_MULTIPLICATION native" # ~ 10s scripts/config.py full scripts/config.py set MBEDTLS_NO_64BIT_MULTIPLICATION make CFLAGS='-Werror -O1' msg "test: MBEDTLS_NO_64BIT_MULTIPLICATION native" # ~ 10s make test } component_test_no_strings () { msg "build: no strings" # ~10s scripts/config.py full # Disable options that activate a large amount of string constants. scripts/config.py unset MBEDTLS_DEBUG_C scripts/config.py unset MBEDTLS_ERROR_C scripts/config.py set MBEDTLS_ERROR_STRERROR_DUMMY scripts/config.py unset MBEDTLS_VERSION_FEATURES make CFLAGS='-Werror -Os' msg "test: no strings" # ~ 10s make test } component_test_no_x509_info () { msg "build: full + MBEDTLS_X509_REMOVE_INFO" # ~ 10s scripts/config.pl full scripts/config.pl unset MBEDTLS_MEMORY_BACKTRACE # too slow for tests scripts/config.pl set MBEDTLS_X509_REMOVE_INFO make CFLAGS='-Werror -O2' msg "test: full + MBEDTLS_X509_REMOVE_INFO" # ~ 10s make test msg "test: ssl-opt.sh, full + MBEDTLS_X509_REMOVE_INFO" # ~ 1 min tests/ssl-opt.sh } component_build_arm_none_eabi_gcc () { msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -O1, baremetal+debug" # ~ 10s scripts/config.py baremetal make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-std=c99 -Werror -Wall -Wextra -O1' lib msg "size: ${ARM_NONE_EABI_GCC_PREFIX}gcc -O1, baremetal+debug" ${ARM_NONE_EABI_GCC_PREFIX}size -t library/*.o } component_build_arm_linux_gnueabi_gcc_arm5vte () { msg "build: ${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc -march=arm5vte, baremetal+debug" # ~ 10s scripts/config.py baremetal # Build for a target platform that's close to what Debian uses # for its "armel" distribution (https://wiki.debian.org/ArmEabiPort). # See https://github.com/Mbed-TLS/mbedtls/pull/2169 and comments. # Build everything including programs, see for example # https://github.com/Mbed-TLS/mbedtls/pull/3449#issuecomment-675313720 make CC="${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc" AR="${ARM_LINUX_GNUEABI_GCC_PREFIX}ar" CFLAGS='-Werror -Wall -Wextra -march=armv5te -O1' LDFLAGS='-march=armv5te' msg "size: ${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc -march=armv5te -O1, baremetal+debug" ${ARM_LINUX_GNUEABI_GCC_PREFIX}size -t library/*.o } support_build_arm_linux_gnueabi_gcc_arm5vte () { type ${ARM_LINUX_GNUEABI_GCC_PREFIX}gcc >/dev/null 2>&1 } component_build_arm_none_eabi_gcc_arm5vte () { msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -march=arm5vte, baremetal+debug" # ~ 10s scripts/config.py baremetal # This is an imperfect substitute for # component_build_arm_linux_gnueabi_gcc_arm5vte # in case the gcc-arm-linux-gnueabi toolchain is not available make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" CFLAGS='-std=c99 -Werror -Wall -Wextra -march=armv5te -O1' LDFLAGS='-march=armv5te' SHELL='sh -x' lib msg "size: ${ARM_NONE_EABI_GCC_PREFIX}gcc -march=armv5te -O1, baremetal+debug" ${ARM_NONE_EABI_GCC_PREFIX}size -t library/*.o } component_build_arm_none_eabi_gcc_m0plus () { msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -mthumb -mcpu=cortex-m0plus, baremetal_size" # ~ 10s scripts/config.py baremetal_size make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-std=c99 -Werror -Wall -Wextra -mthumb -mcpu=cortex-m0plus -Os' lib msg "size: ${ARM_NONE_EABI_GCC_PREFIX}gcc -mthumb -mcpu=cortex-m0plus -Os, baremetal_size" ${ARM_NONE_EABI_GCC_PREFIX}size -t library/*.o for lib in library/*.a; do echo "$lib:" ${ARM_NONE_EABI_GCC_PREFIX}size -t $lib | grep TOTALS done } component_build_arm_none_eabi_gcc_no_udbl_division () { msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc -DMBEDTLS_NO_UDBL_DIVISION, make" # ~ 10s scripts/config.py baremetal scripts/config.py set MBEDTLS_NO_UDBL_DIVISION make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-std=c99 -Werror -Wall -Wextra' lib echo "Checking that software 64-bit division is not required" not grep __aeabi_uldiv library/*.o } component_build_arm_none_eabi_gcc_no_64bit_multiplication () { msg "build: ${ARM_NONE_EABI_GCC_PREFIX}gcc MBEDTLS_NO_64BIT_MULTIPLICATION, make" # ~ 10s scripts/config.py baremetal scripts/config.py set MBEDTLS_NO_64BIT_MULTIPLICATION make CC="${ARM_NONE_EABI_GCC_PREFIX}gcc" AR="${ARM_NONE_EABI_GCC_PREFIX}ar" LD="${ARM_NONE_EABI_GCC_PREFIX}ld" CFLAGS='-std=c99 -Werror -O1 -march=armv6-m -mthumb' lib echo "Checking that software 64-bit multiplication is not required" not grep __aeabi_lmul library/*.o } component_build_arm_clang_thumb () { # ~ 30s scripts/config.py baremetal msg "build: clang thumb 2, make" make clean make CC="clang" CFLAGS='-std=c99 -Werror -Os --target=arm-linux-gnueabihf -march=armv7-m -mthumb' lib # Some Thumb 1 asm is sensitive to optimisation level, so test both -O0 and -Os msg "build: clang thumb 1 -O0, make" make clean make CC="clang" CFLAGS='-std=c99 -Werror -O0 --target=arm-linux-gnueabihf -mcpu=arm1136j-s -mthumb' lib msg "build: clang thumb 1 -Os, make" make clean make CC="clang" CFLAGS='-std=c99 -Werror -Os --target=arm-linux-gnueabihf -mcpu=arm1136j-s -mthumb' lib } component_build_armcc () { msg "build: ARM Compiler 5" scripts/config.py baremetal # armc[56] don't support SHA-512 intrinsics scripts/config.py unset MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT # Stop armclang warning about feature detection for A64_CRYPTO. # With this enabled, the library does build correctly under armclang, # but in baremetal builds (as tested here), feature detection is # unavailable, and the user is notified via a #warning. So enabling # this feature would prevent us from building with -Werror on # armclang. Tracked in #7198. scripts/config.py unset MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT scripts/config.py set MBEDTLS_HAVE_ASM make CC="$ARMC5_CC" AR="$ARMC5_AR" WARNING_CFLAGS='--strict --c99' lib msg "size: ARM Compiler 5" "$ARMC5_FROMELF" -z library/*.o make clean # Compile mostly with -O1 since some Arm inline assembly is disabled for -O0. # ARM Compiler 6 - Target ARMv7-A armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-a" # ARM Compiler 6 - Target ARMv7-M armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-m" # ARM Compiler 6 - Target ARMv7-M+DSP armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv7-m+dsp" # ARM Compiler 6 - Target ARMv8-A - AArch32 armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv8.2-a" # ARM Compiler 6 - Target ARMv8-M armc6_build_test "-O1 --target=arm-arm-none-eabi -march=armv8-m.main" # ARM Compiler 6 - Target ARMv8.2-A - AArch64 armc6_build_test "-O1 --target=aarch64-arm-none-eabi -march=armv8.2-a+crypto" # ARM Compiler 6 - Target Cortex-M0 - no optimisation armc6_build_test "-O0 --target=arm-arm-none-eabi -mcpu=cortex-m0" # ARM Compiler 6 - Target Cortex-M0 armc6_build_test "-Os --target=arm-arm-none-eabi -mcpu=cortex-m0" } support_build_armcc () { armc5_cc="$ARMC5_BIN_DIR/armcc" armc6_cc="$ARMC6_BIN_DIR/armclang" (check_tools "$armc5_cc" "$armc6_cc" > /dev/null 2>&1) } component_test_tls13_only () { msg "build: default config with MBEDTLS_SSL_PROTO_TLS1_3, without MBEDTLS_SSL_PROTO_TLS1_2" scripts/config.py set MBEDTLS_SSL_EARLY_DATA make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'" msg "test: TLS 1.3 only, all key exchange modes enabled" make test msg "ssl-opt.sh: TLS 1.3 only, all key exchange modes enabled" tests/ssl-opt.sh } component_test_tls13_only_psk () { msg "build: TLS 1.3 only from default, only PSK key exchange mode" scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED scripts/config.py unset MBEDTLS_ECDH_C scripts/config.py unset MBEDTLS_DHM_C scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION scripts/config.py unset MBEDTLS_ECDSA_C scripts/config.py unset MBEDTLS_PKCS1_V21 scripts/config.py unset MBEDTLS_PKCS7_C scripts/config.py set MBEDTLS_SSL_EARLY_DATA make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'" msg "test_suite_ssl: TLS 1.3 only, only PSK key exchange mode enabled" cd tests; ./test_suite_ssl; cd .. msg "ssl-opt.sh: TLS 1.3 only, only PSK key exchange mode enabled" tests/ssl-opt.sh } component_test_tls13_only_ephemeral () { msg "build: TLS 1.3 only from default, only ephemeral key exchange mode" scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED scripts/config.py unset MBEDTLS_SSL_EARLY_DATA make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'" msg "test_suite_ssl: TLS 1.3 only, only ephemeral key exchange mode" cd tests; ./test_suite_ssl; cd .. msg "ssl-opt.sh: TLS 1.3 only, only ephemeral key exchange mode" tests/ssl-opt.sh } component_test_tls13_only_ephemeral_ffdh () { msg "build: TLS 1.3 only from default, only ephemeral ffdh key exchange mode" scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_EPHEMERAL_ENABLED scripts/config.py unset MBEDTLS_SSL_EARLY_DATA scripts/config.py unset MBEDTLS_ECDH_C make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'" msg "test_suite_ssl: TLS 1.3 only, only ephemeral ffdh key exchange mode" cd tests; ./test_suite_ssl; cd .. msg "ssl-opt.sh: TLS 1.3 only, only ephemeral ffdh key exchange mode" tests/ssl-opt.sh } component_test_tls13_only_psk_ephemeral () { msg "build: TLS 1.3 only from default, only PSK ephemeral key exchange mode" scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION scripts/config.py unset MBEDTLS_ECDSA_C scripts/config.py unset MBEDTLS_PKCS1_V21 scripts/config.py unset MBEDTLS_PKCS7_C scripts/config.py set MBEDTLS_SSL_EARLY_DATA make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'" msg "test_suite_ssl: TLS 1.3 only, only PSK ephemeral key exchange mode" cd tests; ./test_suite_ssl; cd .. msg "ssl-opt.sh: TLS 1.3 only, only PSK ephemeral key exchange mode" tests/ssl-opt.sh } component_test_tls13_only_psk_ephemeral_ffdh () { msg "build: TLS 1.3 only from default, only PSK ephemeral ffdh key exchange mode" scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION scripts/config.py unset MBEDTLS_ECDSA_C scripts/config.py unset MBEDTLS_PKCS1_V21 scripts/config.py unset MBEDTLS_PKCS7_C scripts/config.py set MBEDTLS_SSL_EARLY_DATA scripts/config.py unset MBEDTLS_ECDH_C make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'" msg "test_suite_ssl: TLS 1.3 only, only PSK ephemeral ffdh key exchange mode" cd tests; ./test_suite_ssl; cd .. msg "ssl-opt.sh: TLS 1.3 only, only PSK ephemeral ffdh key exchange mode" tests/ssl-opt.sh } component_test_tls13_only_psk_all () { msg "build: TLS 1.3 only from default, without ephemeral key exchange mode" scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED scripts/config.py unset MBEDTLS_X509_CRT_PARSE_C scripts/config.py unset MBEDTLS_X509_RSASSA_PSS_SUPPORT scripts/config.py unset MBEDTLS_SSL_SERVER_NAME_INDICATION scripts/config.py unset MBEDTLS_ECDSA_C scripts/config.py unset MBEDTLS_PKCS1_V21 scripts/config.py unset MBEDTLS_PKCS7_C scripts/config.py set MBEDTLS_SSL_EARLY_DATA make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'" msg "test_suite_ssl: TLS 1.3 only, PSK and PSK ephemeral key exchange modes" cd tests; ./test_suite_ssl; cd .. msg "ssl-opt.sh: TLS 1.3 only, PSK and PSK ephemeral key exchange modes" tests/ssl-opt.sh } component_test_tls13_only_ephemeral_all () { msg "build: TLS 1.3 only from default, without PSK key exchange mode" scripts/config.py unset MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_PSK_ENABLED scripts/config.py set MBEDTLS_SSL_EARLY_DATA make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'" msg "test_suite_ssl: TLS 1.3 only, ephemeral and PSK ephemeral key exchange modes" cd tests; ./test_suite_ssl; cd .. msg "ssl-opt.sh: TLS 1.3 only, ephemeral and PSK ephemeral key exchange modes" tests/ssl-opt.sh } component_test_tls13 () { msg "build: default config with MBEDTLS_SSL_PROTO_TLS1_3 enabled, without padding" scripts/config.py set MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py set MBEDTLS_SSL_TLS1_3_COMPATIBILITY_MODE scripts/config.py set MBEDTLS_SSL_CID_TLS1_3_PADDING_GRANULARITY 1 scripts/config.py set MBEDTLS_SSL_EARLY_DATA CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: default config with MBEDTLS_SSL_PROTO_TLS1_3 enabled, without padding" make test msg "ssl-opt.sh (TLS 1.3)" tests/ssl-opt.sh } component_test_tls13_no_compatibility_mode () { msg "build: default config with MBEDTLS_SSL_PROTO_TLS1_3 enabled, without padding" scripts/config.py set MBEDTLS_SSL_PROTO_TLS1_3 scripts/config.py unset MBEDTLS_SSL_TLS1_3_COMPATIBILITY_MODE scripts/config.py set MBEDTLS_SSL_CID_TLS1_3_PADDING_GRANULARITY 1 scripts/config.py set MBEDTLS_SSL_EARLY_DATA CC=gcc cmake -D CMAKE_BUILD_TYPE:String=Asan . make msg "test: default config with MBEDTLS_SSL_PROTO_TLS1_3 enabled, without padding" make test msg "ssl-opt.sh (TLS 1.3 no compatibility mode)" tests/ssl-opt.sh } component_test_tls13_only_record_size_limit () { msg "build: TLS 1.3 only from default, record size limit extension enabled" scripts/config.py set MBEDTLS_SSL_RECORD_SIZE_LIMIT make CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/tls13-only.h\"'" msg "test_suite_ssl: TLS 1.3 only, record size limit extension enabled" cd tests; ./test_suite_ssl; cd .. msg "ssl-opt.sh: (TLS 1.3 only, record size limit extension tests only)" # Both the server and the client will currently abort the handshake when they encounter the # record size limit extension. There is no way to prevent gnutls-cli from sending the extension # which makes all G_NEXT_CLI + P_SRV tests fail. Thus, run only the tests for the this extension. tests/ssl-opt.sh -f "Record Size Limit" } component_build_mingw () { msg "build: Windows cross build - mingw64, make (Link Library)" # ~ 30s scripts/config.py unset MBEDTLS_AESNI_C # AESNI depends on cpu modifiers make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -Wall -Wextra' WINDOWS_BUILD=1 lib programs # note Make tests only builds the tests, but doesn't run them make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror' WINDOWS_BUILD=1 tests make WINDOWS_BUILD=1 clean msg "build: Windows cross build - mingw64, make (DLL)" # ~ 30s make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -Wall -Wextra' WINDOWS_BUILD=1 SHARED=1 lib programs make CC=i686-w64-mingw32-gcc AR=i686-w64-mingw32-ar LD=i686-w64-minggw32-ld CFLAGS='-Werror -Wall -Wextra' WINDOWS_BUILD=1 SHARED=1 tests make WINDOWS_BUILD=1 clean } support_build_mingw() { case $(i686-w64-mingw32-gcc -dumpversion 2>/dev/null) in [0-5]*|"") false;; *) true;; esac } component_test_memsan () { msg "build: MSan (clang)" # ~ 1 min 20s scripts/config.py unset MBEDTLS_AESNI_C # memsan doesn't grok asm CC=clang cmake -D CMAKE_BUILD_TYPE:String=MemSan . make msg "test: main suites (MSan)" # ~ 10s make test msg "test: ssl-opt.sh (MSan)" # ~ 1 min tests/ssl-opt.sh # Optional part(s) if [ "$MEMORY" -gt 0 ]; then msg "test: compat.sh (MSan)" # ~ 6 min 20s tests/compat.sh fi } component_test_valgrind () { msg "build: Release (clang)" # default config, in particular without MBEDTLS_USE_PSA_CRYPTO CC=clang cmake -D CMAKE_BUILD_TYPE:String=Release . make msg "test: main suites, Valgrind (default config)" make memcheck # Optional parts (slow; currently broken on OS X because programs don't # seem to receive signals under valgrind on OS X). # These optional parts don't run on the CI. if [ "$MEMORY" -gt 0 ]; then msg "test: ssl-opt.sh --memcheck (default config)" tests/ssl-opt.sh --memcheck fi if [ "$MEMORY" -gt 1 ]; then msg "test: compat.sh --memcheck (default config)" tests/compat.sh --memcheck fi if [ "$MEMORY" -gt 0 ]; then msg "test: context-info.sh --memcheck (default config)" tests/context-info.sh --memcheck fi } component_test_valgrind_psa () { msg "build: Release, full (clang)" # full config, in particular with MBEDTLS_USE_PSA_CRYPTO scripts/config.py full CC=clang cmake -D CMAKE_BUILD_TYPE:String=Release . make msg "test: main suites, Valgrind (full config)" make memcheck } support_test_cmake_out_of_source () { distrib_id="" distrib_ver="" distrib_ver_minor="" distrib_ver_major="" # Attempt to parse lsb-release to find out distribution and version. If not # found this should fail safe (test is supported). if [[ -f /etc/lsb-release ]]; then while read -r lsb_line; do case "$lsb_line" in "DISTRIB_ID"*) distrib_id=${lsb_line/#DISTRIB_ID=};; "DISTRIB_RELEASE"*) distrib_ver=${lsb_line/#DISTRIB_RELEASE=};; esac done < /etc/lsb-release distrib_ver_major="${distrib_ver%%.*}" distrib_ver="${distrib_ver#*.}" distrib_ver_minor="${distrib_ver%%.*}" fi # Running the out of source CMake test on Ubuntu 16.04 using more than one # processor (as the CI does) can create a race condition whereby the build # fails to see a generated file, despite that file actually having been # generated. This problem appears to go away with 18.04 or newer, so make # the out of source tests unsupported on Ubuntu 16.04. [ "$distrib_id" != "Ubuntu" ] || [ "$distrib_ver_major" -gt 16 ] } component_test_cmake_out_of_source () { msg "build: cmake 'out-of-source' build" MBEDTLS_ROOT_DIR="$PWD" mkdir "$OUT_OF_SOURCE_DIR" cd "$OUT_OF_SOURCE_DIR" cmake -D CMAKE_BUILD_TYPE:String=Check "$MBEDTLS_ROOT_DIR" make msg "test: cmake 'out-of-source' build" make test # Check that ssl-opt.sh can find the test programs. # Also ensure that there are no error messages such as # "No such file or directory", which would indicate that some required # file is missing (ssl-opt.sh tolerates the absence of some files so # may exit with status 0 but emit errors). ./tests/ssl-opt.sh -f 'Default' >ssl-opt.out 2>ssl-opt.err grep PASS ssl-opt.out cat ssl-opt.err >&2 # If ssl-opt.err is non-empty, record an error and keep going. [ ! -s ssl-opt.err ] rm ssl-opt.out ssl-opt.err cd "$MBEDTLS_ROOT_DIR" rm -rf "$OUT_OF_SOURCE_DIR" } component_test_cmake_as_subdirectory () { msg "build: cmake 'as-subdirectory' build" cd programs/test/cmake_subproject cmake . make ./cmake_subproject } support_test_cmake_as_subdirectory () { support_test_cmake_out_of_source } component_test_cmake_as_package () { msg "build: cmake 'as-package' build" cd programs/test/cmake_package cmake . make ./cmake_package } support_test_cmake_as_package () { support_test_cmake_out_of_source } component_test_cmake_as_package_install () { msg "build: cmake 'as-installed-package' build" cd programs/test/cmake_package_install cmake . make ./cmake_package_install } support_test_cmake_as_package_install () { support_test_cmake_out_of_source } component_build_cmake_custom_config_file () { # Make a copy of config file to use for the in-tree test cp "$CONFIG_H" include/mbedtls_config_in_tree_copy.h MBEDTLS_ROOT_DIR="$PWD" mkdir "$OUT_OF_SOURCE_DIR" cd "$OUT_OF_SOURCE_DIR" # Build once to get the generated files (which need an intact config file) cmake "$MBEDTLS_ROOT_DIR" make msg "build: cmake with -DMBEDTLS_CONFIG_FILE" scripts/config.py -w full_config.h full echo '#error "cmake -DMBEDTLS_CONFIG_FILE is not working."' > "$MBEDTLS_ROOT_DIR/$CONFIG_H" cmake -DGEN_FILES=OFF -DMBEDTLS_CONFIG_FILE=full_config.h "$MBEDTLS_ROOT_DIR" make msg "build: cmake with -DMBEDTLS_CONFIG_FILE + -DMBEDTLS_USER_CONFIG_FILE" # In the user config, disable one feature (for simplicity, pick a feature # that nothing else depends on). echo '#undef MBEDTLS_NIST_KW_C' >user_config.h cmake -DGEN_FILES=OFF -DMBEDTLS_CONFIG_FILE=full_config.h -DMBEDTLS_USER_CONFIG_FILE=user_config.h "$MBEDTLS_ROOT_DIR" make not programs/test/query_compile_time_config MBEDTLS_NIST_KW_C rm -f user_config.h full_config.h cd "$MBEDTLS_ROOT_DIR" rm -rf "$OUT_OF_SOURCE_DIR" # Now repeat the test for an in-tree build: # Restore config for the in-tree test mv include/mbedtls_config_in_tree_copy.h "$CONFIG_H" # Build once to get the generated files (which need an intact config) cmake . make msg "build: cmake (in-tree) with -DMBEDTLS_CONFIG_FILE" scripts/config.py -w full_config.h full echo '#error "cmake -DMBEDTLS_CONFIG_FILE is not working."' > "$MBEDTLS_ROOT_DIR/$CONFIG_H" cmake -DGEN_FILES=OFF -DMBEDTLS_CONFIG_FILE=full_config.h . make msg "build: cmake (in-tree) with -DMBEDTLS_CONFIG_FILE + -DMBEDTLS_USER_CONFIG_FILE" # In the user config, disable one feature (for simplicity, pick a feature # that nothing else depends on). echo '#undef MBEDTLS_NIST_KW_C' >user_config.h cmake -DGEN_FILES=OFF -DMBEDTLS_CONFIG_FILE=full_config.h -DMBEDTLS_USER_CONFIG_FILE=user_config.h . make not programs/test/query_compile_time_config MBEDTLS_NIST_KW_C rm -f user_config.h full_config.h } support_build_cmake_custom_config_file () { support_test_cmake_out_of_source } component_build_zeroize_checks () { msg "build: check for obviously wrong calls to mbedtls_platform_zeroize()" scripts/config.py full # Only compile - we're looking for sizeof-pointer-memaccess warnings make CC=gcc CFLAGS="'-DMBEDTLS_USER_CONFIG_FILE=\"../tests/configs/user-config-zeroize-memset.h\"' -DMBEDTLS_TEST_DEFINES_ZEROIZE -Werror -Wsizeof-pointer-memaccess" } component_test_zeroize () { # Test that the function mbedtls_platform_zeroize() is not optimized away by # different combinations of compilers and optimization flags by using an # auxiliary GDB script. Unfortunately, GDB does not return error values to the # system in all cases that the script fails, so we must manually search the # output to check whether the pass string is present and no failure strings # were printed. # Don't try to disable ASLR. We don't care about ASLR here. We do care # about a spurious message if Gdb tries and fails, so suppress that. gdb_disable_aslr= if [ -z "$(gdb -batch -nw -ex 'set disable-randomization off' 2>&1)" ]; then gdb_disable_aslr='set disable-randomization off' fi for optimization_flag in -O2 -O3 -Ofast -Os; do for compiler in clang gcc; do msg "test: $compiler $optimization_flag, mbedtls_platform_zeroize()" make programs CC="$compiler" DEBUG=1 CFLAGS="$optimization_flag" gdb -ex "$gdb_disable_aslr" -x tests/scripts/test_zeroize.gdb -nw -batch -nx 2>&1 | tee test_zeroize.log grep "The buffer was correctly zeroized" test_zeroize.log not grep -i "error" test_zeroize.log rm -f test_zeroize.log make clean done done } component_test_psa_compliance () { msg "build: make, default config (out-of-box), libmbedcrypto.a only" make -C library libmbedcrypto.a msg "unit test: test_psa_compliance.py" ./tests/scripts/test_psa_compliance.py } support_test_psa_compliance () { # psa-compliance-tests only supports CMake >= 3.10.0 ver="$(cmake --version)" ver="${ver#cmake version }" ver_major="${ver%%.*}" ver="${ver#*.}" ver_minor="${ver%%.*}" [ "$ver_major" -eq 3 ] && [ "$ver_minor" -ge 10 ] } component_check_code_style () { msg "Check C code style" ./scripts/code_style.py } support_check_code_style() { case $(uncrustify --version) in *0.75.1*) true;; *) false;; esac } component_check_python_files () { msg "Lint: Python scripts" tests/scripts/check-python-files.sh } component_check_test_helpers () { msg "unit test: generate_test_code.py" # unittest writes out mundane stuff like number or tests run on stderr. # Our convention is to reserve stderr for actual errors, and write # harmless info on stdout so it can be suppress with --quiet. ./tests/scripts/test_generate_test_code.py 2>&1 msg "unit test: translate_ciphers.py" python3 -m unittest tests/scripts/translate_ciphers.py 2>&1 } ################################################################ #### Termination ################################################################ post_report () { msg "Done, cleaning up" final_cleanup final_report } ################################################################ #### Run all the things ################################################################ # Function invoked by --error-test to test error reporting. pseudo_component_error_test () { msg "Testing error reporting $error_test_i" if [ $KEEP_GOING -ne 0 ]; then echo "Expect three failing commands." fi # If the component doesn't run in a subshell, changing error_test_i to an # invalid integer will cause an error in the loop that runs this function. error_test_i=this_should_not_be_used_since_the_component_runs_in_a_subshell # Expected error: 'grep non_existent /dev/null -> 1' grep non_existent /dev/null # Expected error: '! grep -q . tests/scripts/all.sh -> 1' not grep -q . "$0" # Expected error: 'make unknown_target -> 2' make unknown_target false "this should not be executed" } # Run one component and clean up afterwards. run_component () { current_component="$1" export MBEDTLS_TEST_CONFIGURATION="$current_component" # Unconditionally create a seedfile that's sufficiently long. # Do this before each component, because a previous component may # have messed it up or shortened it. local dd_cmd dd_cmd=(dd if=/dev/urandom of=./tests/seedfile bs=64 count=1) case $OSTYPE in linux*|freebsd*|openbsd*) dd_cmd+=(status=none) esac "${dd_cmd[@]}" # Run the component in a subshell, with error trapping and output # redirection set up based on the relevant options. if [ $KEEP_GOING -eq 1 ]; then # We want to keep running if the subshell fails, so 'set -e' must # be off when the subshell runs. set +e fi ( if [ $QUIET -eq 1 ]; then # msg() will be silenced, so just print the component name here. echo "${current_component#component_}" exec >/dev/null fi if [ $KEEP_GOING -eq 1 ]; then # Keep "set -e" off, and run an ERR trap instead to record failures. set -E trap err_trap ERR fi # The next line is what runs the component "$@" if [ $KEEP_GOING -eq 1 ]; then trap - ERR exit $last_failure_status fi ) component_status=$? if [ $KEEP_GOING -eq 1 ]; then set -e if [ $component_status -ne 0 ]; then failure_count=$((failure_count + 1)) fi fi # Restore the build tree to a clean state. cleanup unset current_component } # Preliminary setup pre_check_environment pre_parse_command_line_for_dirs "$@" pre_initialize_variables pre_parse_command_line "$@" pre_check_git pre_restore_files pre_back_up build_status=0 if [ $KEEP_GOING -eq 1 ]; then pre_setup_keep_going fi pre_prepare_outcome_file pre_print_configuration pre_check_tools cleanup if in_mbedtls_repo; then pre_generate_files fi # Run the requested tests. for ((error_test_i=1; error_test_i <= error_test; error_test_i++)); do run_component pseudo_component_error_test done unset error_test_i for component in $RUN_COMPONENTS; do run_component "component_$component" done # We're done. post_report