/** * Modular bignum functions * * This module implements operations on integers modulo some fixed modulus. * * The functions in this module obey the following conventions unless * explicitly indicated otherwise: * * - **Modulus parameters**: the modulus is passed as a pointer to a structure * of type #mbedtls_mpi_mod_modulus. The structure must be set up with an * array of limbs storing the bignum value of the modulus. The modulus must * be odd and is assumed to have no leading zeroes. The modulus is usually * named \c N and is usually input-only. Functions which take a parameter * of type \c const #mbedtls_mpi_mod_modulus* must not modify its value. * - **Bignum parameters**: Bignums are passed as pointers to an array of * limbs or to a #mbedtls_mpi_mod_residue structure. A limb has the type * #mbedtls_mpi_uint. Residues must be initialized before use, and must be * associated with the modulus \c N. Unless otherwise specified: * - Bignum parameters called \c A, \c B, ... are inputs and are not * modified by the function. Functions which take a parameter of * type \c const #mbedtls_mpi_mod_residue* must not modify its value. * - Bignum parameters called \c X, \c Y, ... are outputs or input-output. * The initial bignum value of output-only parameters is ignored, but * they must be set up and associated with the modulus \c N. Some * functions (typically constant-flow) require that the limbs in an * output residue are initialized. * - Bignum parameters called \c p are inputs used to set up a modulus or * residue. These must be pointers to an array of limbs. * - \c T is a temporary storage area. The initial content of such a * parameter is ignored and the final content is unspecified. * - Some functions use different names, such as \c r for the residue. * - **Bignum sizes**: bignum sizes are always expressed in limbs. Both * #mbedtls_mpi_mod_modulus and #mbedtls_mpi_mod_residue have a \c limbs * member storing its size. All bignum parameters must have the same * number of limbs as the modulus. All bignum sizes must be at least 1 and * must be significantly less than #SIZE_MAX. The behavior if a size is 0 is * undefined. * - **Bignum representation**: the representation of inputs and outputs is * specified by the \c int_rep field of the modulus. * - **Parameter ordering**: for bignum parameters, outputs come before inputs. * The modulus is passed after residues. Temporaries come last. * - **Aliasing**: in general, output bignums may be aliased to one or more * inputs. Modulus values may not be aliased to any other parameter. Outputs * may not be aliased to one another. Temporaries may not be aliased to any * other parameter. * - **Overlap**: apart from aliasing of residue pointers (where two residue * arguments are equal pointers), overlap is not supported and may result * in undefined behavior. * - **Error handling**: functions generally check compatibility of input * sizes. Most functions will not check that input values are in canonical * form (i.e. that \c A < \c N), this is only checked during setup of a * residue structure. * - **Modular representatives**: all functions expect inputs to be in the * range [0, \c N - 1] and guarantee outputs in the range [0, \c N - 1]. * Residues are set up with an associated modulus, and operations are only * guaranteed to work if the modulus is associated with all residue * parameters. If a residue is passed with a modulus other than the one it * is associated with, then it may be out of range. If an input is out of * range, outputs are fully unspecified, though bignum values out of range * should not cause buffer overflows (beware that this is not extensively * tested). */ /* * Copyright The Mbed TLS Contributors * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the "License"); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBEDTLS_BIGNUM_MOD_H #define MBEDTLS_BIGNUM_MOD_H #include "common.h" #if defined(MBEDTLS_BIGNUM_C) #include "mbedtls/bignum.h" #endif /** How residues associated with a modulus are represented. * * This also determines which fields of the modulus structure are valid and * what their contents are (see #mbedtls_mpi_mod_modulus). */ typedef enum { /** Representation not chosen (makes the modulus structure invalid). */ MBEDTLS_MPI_MOD_REP_INVALID = 0, /* Skip 1 as it is slightly easier to accidentally pass to functions. */ /** Montgomery representation. */ MBEDTLS_MPI_MOD_REP_MONTGOMERY = 2, /** TODO: document this. * * Residues are in canonical representation. */ MBEDTLS_MPI_MOD_REP_OPT_RED, } mbedtls_mpi_mod_rep_selector; /* Make mbedtls_mpi_mod_rep_selector and mbedtls_mpi_mod_ext_rep disjoint to * make it easier to catch when they are accidentally swapped. */ typedef enum { MBEDTLS_MPI_MOD_EXT_REP_INVALID = 0, MBEDTLS_MPI_MOD_EXT_REP_LE = 8, MBEDTLS_MPI_MOD_EXT_REP_BE } mbedtls_mpi_mod_ext_rep; typedef struct { mbedtls_mpi_uint *p; size_t limbs; } mbedtls_mpi_mod_residue; typedef struct { mbedtls_mpi_uint const *rr; /* The residue for 2^{2*n*biL} mod N */ mbedtls_mpi_uint mm; /* Montgomery const for -N^{-1} mod 2^{ciL} */ } mbedtls_mpi_mont_struct; typedef void *mbedtls_mpi_opt_red_struct; typedef struct { const mbedtls_mpi_uint *p; size_t limbs; // number of limbs size_t bits; // bitlen of p mbedtls_mpi_mod_rep_selector int_rep; // selector to signal the active member of the union union rep { /* if int_rep == #MBEDTLS_MPI_MOD_REP_MONTGOMERY */ mbedtls_mpi_mont_struct mont; /* if int_rep == #MBEDTLS_MPI_MOD_REP_OPT_RED */ mbedtls_mpi_opt_red_struct ored; } rep; } mbedtls_mpi_mod_modulus; /** Setup a residue structure. * * The residue will be set up with the buffer \p p and modulus \p N. * * The memory pointed to by \p p will be used by the resulting residue structure. * The value at the pointed-to memory will be the initial value of \p r and must * hold a value that is less than the modulus. This value will be used as-is * and interpreted according to the value of the `N->int_rep` field. * * The modulus \p N will be the modulus associated with \p r. The residue \p r * should only be used in operations where the modulus is \p N. * * \param[out] r The address of the residue to setup. * \param[in] N The address of the modulus related to \p r. * \param[in] p The address of the limb array containing the value of \p r. * The memory pointed to by \p p will be used by \p r and must * not be modified in any way until after * mbedtls_mpi_mod_residue_release() is called. The data * pointed to by \p p must be less than the modulus (the value * pointed to by `N->p`) and already in the representation * indicated by `N->int_rep`. * \param p_limbs The number of limbs of \p p. Must be the same as the number * of limbs in the modulus \p N. * * \return \c 0 if successful. * \return #MBEDTLS_ERR_MPI_BAD_INPUT_DATA if \p p_limbs is less than the * limbs in \p N or if \p p is not less than \p N. */ int mbedtls_mpi_mod_residue_setup(mbedtls_mpi_mod_residue *r, const mbedtls_mpi_mod_modulus *N, mbedtls_mpi_uint *p, size_t p_limbs); /** Unbind elements of a residue structure. * * This function removes the reference to the limb array that was passed to * mbedtls_mpi_mod_residue_setup() to make it safe to free or use again. * * This function invalidates \p r and it must not be used until after * mbedtls_mpi_mod_residue_setup() is called on it again. * * \param[out] r The address of residue to release. */ void mbedtls_mpi_mod_residue_release(mbedtls_mpi_mod_residue *r); /** Initialize a modulus structure. * * \param[out] N The address of the modulus structure to initialize. */ void mbedtls_mpi_mod_modulus_init(mbedtls_mpi_mod_modulus *N); /** Setup a modulus structure. * * \param[out] N The address of the modulus structure to populate. * \param[in] p The address of the limb array storing the value of \p N. * The memory pointed to by \p p will be used by \p N and must * not be modified in any way until after * mbedtls_mpi_mod_modulus_free() is called. * \param p_limbs The number of limbs of \p p. * \param int_rep The internal representation to be used for residues * associated with \p N (see #mbedtls_mpi_mod_rep_selector). * * \return \c 0 if successful. * \return #MBEDTLS_ERR_MPI_BAD_INPUT_DATA if \p int_rep is invalid. */ int mbedtls_mpi_mod_modulus_setup(mbedtls_mpi_mod_modulus *N, const mbedtls_mpi_uint *p, size_t p_limbs, mbedtls_mpi_mod_rep_selector int_rep); /** Free elements of a modulus structure. * * This function frees any memory allocated by mbedtls_mpi_mod_modulus_setup(). * * \warning This function does not free the limb array passed to * mbedtls_mpi_mod_modulus_setup() only removes the reference to it, * making it safe to free or to use it again. * * \param[in,out] N The address of the modulus structure to free. */ void mbedtls_mpi_mod_modulus_free(mbedtls_mpi_mod_modulus *N); /* BEGIN MERGE SLOT 1 */ /* END MERGE SLOT 1 */ /* BEGIN MERGE SLOT 2 */ /** \brief Multiply two residues, returning the residue modulo the specified * modulus. * * \note Currently handles the case when `N->int_rep` is * MBEDTLS_MPI_MOD_REP_MONTGOMERY. * * The size of the operation is determined by \p N. \p A, \p B and \p X must * all be associated with the modulus \p N and must all have the same number * of limbs as \p N. * * \p X may be aliased to \p A or \p B, or even both, but may not overlap * either otherwise. They may not alias \p N (since they must be in canonical * form, they cannot == \p N). * * \param[out] X The address of the result MPI. Must have the same * number of limbs as \p N. * On successful completion, \p X contains the result of * the multiplication `A * B * R^-1` mod N where * `R = 2^(biL * N->limbs)`. * \param[in] A The address of the first MPI. * \param[in] B The address of the second MPI. * \param[in] N The address of the modulus. Used to perform a modulo * operation on the result of the multiplication. * * \return \c 0 if successful. * \return #MBEDTLS_ERR_MPI_BAD_INPUT_DATA if all the parameters do not * have the same number of limbs or \p N is invalid. * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED on memory-allocation failure. */ int mbedtls_mpi_mod_mul(mbedtls_mpi_mod_residue *X, const mbedtls_mpi_mod_residue *A, const mbedtls_mpi_mod_residue *B, const mbedtls_mpi_mod_modulus *N); /* END MERGE SLOT 2 */ /* BEGIN MERGE SLOT 3 */ /** * \brief Perform a fixed-size modular subtraction. * * Calculate `A - B modulo N`. * * \p A, \p B and \p X must all have the same number of limbs as \p N. * * \p X may be aliased to \p A or \p B, or even both, but may not overlap * either otherwise. * * \note This function does not check that \p A or \p B are in canonical * form (that is, are < \p N) - that will have been done by * mbedtls_mpi_mod_residue_setup(). * * \param[out] X The address of the result MPI. Must be initialized. * Must have the same number of limbs as the modulus \p N. * \param[in] A The address of the first MPI. * \param[in] B The address of the second MPI. * \param[in] N The address of the modulus. Used to perform a modulo * operation on the result of the subtraction. * * \return \c 0 if successful. * \return #MBEDTLS_ERR_MPI_BAD_INPUT_DATA if the given MPIs do not * have the correct number of limbs. */ int mbedtls_mpi_mod_sub(mbedtls_mpi_mod_residue *X, const mbedtls_mpi_mod_residue *A, const mbedtls_mpi_mod_residue *B, const mbedtls_mpi_mod_modulus *N); /** * \brief Perform modular inversion of an MPI with respect to a modulus \p N. * * \p A and \p X must be associated with the modulus \p N and will therefore * have the same number of limbs as \p N. * * \p X may be aliased to \p A. * * \warning Currently only supports prime moduli, but does not check for them. * * \param[out] X The modular inverse of \p A with respect to \p N. * \param[in] A The number to calculate the modular inverse of. * Must not be 0. * \param[in] N The modulus to use. * * \return \c 0 if successful. * \return #MBEDTLS_ERR_MPI_BAD_INPUT_DATA if \p A and \p N do not * have the same number of limbs. * \return #MBEDTLS_ERR_MPI_BAD_INPUT_DATA if \p A is zero. * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if couldn't allocate enough * memory (needed for conversion to and from Mongtomery form * when not in Montgomery form already, and for temporary use * by the inversion calculation itself). */ int mbedtls_mpi_mod_inv(mbedtls_mpi_mod_residue *X, const mbedtls_mpi_mod_residue *A, const mbedtls_mpi_mod_modulus *N); /* END MERGE SLOT 3 */ /* BEGIN MERGE SLOT 4 */ /* END MERGE SLOT 4 */ /* BEGIN MERGE SLOT 5 */ /** * \brief Perform a fixed-size modular addition. * * Calculate `A + B modulo N`. * * \p A, \p B and \p X must all be associated with the modulus \p N and must * all have the same number of limbs as \p N. * * \p X may be aliased to \p A or \p B, or even both, but may not overlap * either otherwise. * * \note This function does not check that \p A or \p B are in canonical * form (that is, are < \p N) - that will have been done by * mbedtls_mpi_mod_residue_setup(). * * \param[out] X The address of the result residue. Must be initialized. * Must have the same number of limbs as the modulus \p N. * \param[in] A The address of the first input residue. * \param[in] B The address of the second input residue. * \param[in] N The address of the modulus. Used to perform a modulo * operation on the result of the addition. * * \return \c 0 if successful. * \return #MBEDTLS_ERR_MPI_BAD_INPUT_DATA if the given MPIs do not * have the correct number of limbs. */ int mbedtls_mpi_mod_add(mbedtls_mpi_mod_residue *X, const mbedtls_mpi_mod_residue *A, const mbedtls_mpi_mod_residue *B, const mbedtls_mpi_mod_modulus *N); /* END MERGE SLOT 5 */ /* BEGIN MERGE SLOT 6 */ /** Generate a random number uniformly in a range. * * This function generates a random number between \p min inclusive and * \p N exclusive. * * The procedure complies with RFC 6979 ยง3.3 (deterministic ECDSA) * when the RNG is a suitably parametrized instance of HMAC_DRBG * and \p min is \c 1. * * \note There are `N - min` possible outputs. The lower bound * \p min can be reached, but the upper bound \p N cannot. * * \param X The destination residue. * \param min The minimum value to return. It must be strictly smaller * than \b N. * \param N The modulus. * This is the upper bound of the output range, exclusive. * \param f_rng The RNG function to use. This must not be \c NULL. * \param p_rng The RNG parameter to be passed to \p f_rng. * * \return \c 0 if successful. * \return #MBEDTLS_ERR_MPI_NOT_ACCEPTABLE if the implementation was * unable to find a suitable value within a limited number * of attempts. This has a negligible probability if \p N * is significantly larger than \p min, which is the case * for all usual cryptographic applications. */ int mbedtls_mpi_mod_random(mbedtls_mpi_mod_residue *X, mbedtls_mpi_uint min, const mbedtls_mpi_mod_modulus *N, int (*f_rng)(void *, unsigned char *, size_t), void *p_rng); /* END MERGE SLOT 6 */ /* BEGIN MERGE SLOT 7 */ /** Read a residue from a byte buffer. * * The residue will be automatically converted to the internal representation * based on the value of the `N->int_rep` field. * * The modulus \p N will be the modulus associated with \p r. The residue \p r * should only be used in operations where the modulus is \p N or a modulus * equivalent to \p N (in the sense that all their fields or memory pointed by * their fields hold the same value). * * \param[out] r The address of the residue. It must have exactly the same * number of limbs as the modulus \p N. * \param[in] N The address of the modulus. * \param[in] buf The input buffer to import from. * \param buflen The length in bytes of \p buf. * \param ext_rep The endianness of the number in the input buffer. * * \return \c 0 if successful. * \return #MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL if \p r isn't * large enough to hold the value in \p buf. * \return #MBEDTLS_ERR_MPI_BAD_INPUT_DATA if \p ext_rep * is invalid or the value in the buffer is not less than \p N. */ int mbedtls_mpi_mod_read(mbedtls_mpi_mod_residue *r, const mbedtls_mpi_mod_modulus *N, const unsigned char *buf, size_t buflen, mbedtls_mpi_mod_ext_rep ext_rep); /** Write a residue into a byte buffer. * * The modulus \p N must be the modulus associated with \p r (see * mbedtls_mpi_mod_residue_setup() and mbedtls_mpi_mod_read()). * * The residue will be automatically converted from the internal representation * based on the value of `N->int_rep` field. * * \warning If the buffer is smaller than `N->bits`, the number of * leading zeroes is leaked through timing. If \p r is * secret, the caller must ensure that \p buflen is at least * (`N->bits`+7)/8. * * \param[in] r The address of the residue. It must have the same number of * limbs as the modulus \p N. (\p r is an input parameter, but * its value will be modified during execution and restored * before the function returns.) * \param[in] N The address of the modulus associated with \p r. * \param[out] buf The output buffer to export to. * \param buflen The length in bytes of \p buf. * \param ext_rep The endianness in which the number should be written into * the output buffer. * * \return \c 0 if successful. * \return #MBEDTLS_ERR_MPI_BUFFER_TOO_SMALL if \p buf isn't * large enough to hold the value of \p r (without leading * zeroes). * \return #MBEDTLS_ERR_MPI_BAD_INPUT_DATA if \p ext_rep is invalid. * \return #MBEDTLS_ERR_MPI_ALLOC_FAILED if couldn't allocate enough * memory for conversion. Can occur only for moduli with * MBEDTLS_MPI_MOD_REP_MONTGOMERY. */ int mbedtls_mpi_mod_write(const mbedtls_mpi_mod_residue *r, const mbedtls_mpi_mod_modulus *N, unsigned char *buf, size_t buflen, mbedtls_mpi_mod_ext_rep ext_rep); /* END MERGE SLOT 7 */ /* BEGIN MERGE SLOT 8 */ /* END MERGE SLOT 8 */ /* BEGIN MERGE SLOT 9 */ /* END MERGE SLOT 9 */ /* BEGIN MERGE SLOT 10 */ /* END MERGE SLOT 10 */ #endif /* MBEDTLS_BIGNUM_MOD_H */