## This file contains a record of how some of the test data was ## generated. The final build products are committed to the repository ## as well to make sure that the test data is identical. You do not ## need to use this makefile unless you're extending Mbed TLS's tests. ## Many data files were generated prior to the existence of this ## makefile, so the method of their generation was not recorded. ## Note that in addition to depending on the version of the data ## generation tool, many of the build outputs are randomized, so ## running this makefile twice would not produce the same results. ## Tools OPENSSL ?= openssl FAKETIME ?= faketime TOP_DIR = ../.. MBEDTLS_CERT_WRITE ?= $(TOP_DIR)/programs/x509/cert_write MBEDTLS_CERT_REQ ?= $(TOP_DIR)/programs/x509/cert_req ## Build the generated test data. Note that since the final outputs ## are committed to the repository, this target should do nothing on a ## fresh checkout. Furthermore, since the generation is randomized, ## re-running the same targets may result in differing files. The goal ## of this makefile is primarily to serve as a record of how the ## targets were generated in the first place. default: all_final all_intermediate := # temporary files all_final := # files used by tests ################################################################ #### Generate certificates from existing keys ################################################################ test_ca_crt = test-ca.crt test_ca_key_file_rsa = test-ca.key test_ca_pwd_rsa = PolarSSLTest test_ca_config_file = test-ca.opensslconf $(test_ca_key_file_rsa): $(OPENSSL) genrsa -aes-128-cbc -passout pass:$(test_ca_pwd_rsa) -out $@ 2048 all_final += $(test_ca_key_file_rsa) test-ca.req.sha256: $(test_ca_key_file_rsa) $(MBEDTLS_CERT_REQ) output_file=$@ filename=$(test_ca_key_file_rsa) password=$(test_ca_pwd_rsa) subject_name="C=NL,O=PolarSSL,CN=PolarSSL Test CA" md=SHA256 all_intermediate += test-ca.req.sha256 parse_input/test-ca.crt test-ca.crt: $(test_ca_key_file_rsa) test-ca.req.sha256 $(MBEDTLS_CERT_WRITE) is_ca=1 serial=3 request_file=test-ca.req.sha256 selfsign=1 issuer_name="C=NL,O=PolarSSL,CN=PolarSSL Test CA" issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144400 not_after=20290210144400 md=SHA1 version=3 output_file=$@ all_final += test-ca.crt parse_input/test-ca.crt.der: parse_input/test-ca.crt $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ test-ca.key.der: $(test_ca_key_file_rsa) $(OPENSSL) pkey -in $< -out $@ -inform PEM -outform DER -passin "pass:$(test_ca_pwd_rsa)" all_final += test-ca.key.der # This is only used for generating cert_example_multi_nocn.crt test-ca_nocn.crt: $(test_ca_key_file_rsa) $(MBEDTLS_CERT_WRITE) is_ca=1 serial=3 selfsign=1 \ subject_key=$(test_ca_key_file_rsa) subject_pwd=$(test_ca_pwd_rsa) subject_name="C=NL" \ issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) issuer_name="C=NL" \ not_before=20190210144400 not_after=20290210144400 md=SHA1 version=3 output_file=$@ all_intermediate += test-ca_nocn.crt test-ca-sha1.crt: $(test_ca_key_file_rsa) test-ca.req.sha256 $(MBEDTLS_CERT_WRITE) is_ca=1 serial=3 request_file=test-ca.req.sha256 selfsign=1 issuer_name="C=NL,O=PolarSSL,CN=PolarSSL Test CA" issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144400 not_after=20290210144400 md=SHA1 version=3 output_file=$@ all_final += test-ca-sha1.crt test-ca-sha1.crt.der: test-ca-sha1.crt $(OPENSSL) x509 -in $< -out $@ -inform PEM -outform DER all_final += test-ca-sha1.crt.der test-ca-sha256.crt: $(test_ca_key_file_rsa) test-ca.req.sha256 $(MBEDTLS_CERT_WRITE) is_ca=1 serial=3 request_file=test-ca.req.sha256 selfsign=1 issuer_name="C=NL,O=PolarSSL,CN=PolarSSL Test CA" issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144400 not_after=20290210144400 md=SHA256 version=3 output_file=$@ all_final += test-ca-sha256.crt test-ca-sha256.crt.der: test-ca-sha256.crt $(OPENSSL) x509 -in $< -out $@ -inform PEM -outform DER all_final += test-ca-sha256.crt.der test-ca_utf8.crt: $(test_ca_key_file_rsa) $(OPENSSL) req -x509 -new -nodes -key $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 3 -config $(test_ca_config_file) -sha1 -days 3653 -utf8 -subj "/C=NL/O=PolarSSL/CN=PolarSSL Test CA" -out $@ all_final += test-ca_utf8.crt test-ca_printable.crt: $(test_ca_key_file_rsa) $(OPENSSL) req -x509 -new -nodes -key $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 3 -config $(test_ca_config_file) -sha1 -days 3653 -subj "/C=NL/O=PolarSSL/CN=PolarSSL Test CA" -out $@ all_final += test-ca_printable.crt test-ca_uppercase.crt: $(test_ca_key_file_rsa) $(OPENSSL) req -x509 -new -nodes -key $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 3 -config $(test_ca_config_file) -sha1 -days 3653 -subj "/C=NL/O=PolarSSL/CN=PolarSSL Test CA" -out $@ all_final += test-ca_uppercase.crt test_ca_key_file_rsa_alt = test-ca-alt.key cert_example_multi.csr: rsa_pkcs1_1024_clear.pem $(OPENSSL) req -new -subj "/C=NL/O=PolarSSL/CN=www.example.com" -set_serial 17 -config $(test_ca_config_file) -extensions dns_alt_names -days 3650 -key rsa_pkcs1_1024_clear.pem -out $@ parse_input/cert_example_multi.crt cert_example_multi.crt: cert_example_multi.csr $(OPENSSL) x509 -req -CA $(test_ca_crt) -CAkey $(test_ca_key_file_rsa) \ -extfile $(test_ca_config_file) -extensions dns_alt_names \ -passin "pass:$(test_ca_pwd_rsa)" -set_serial 17 -days 3653 -sha256 \ -in $< > $@ cert_example_multi_nocn.csr: rsa_pkcs1_1024_clear.pem $(MBEDTLS_CERT_REQ) filename=$< output_file=$@ subject_name='C=NL' all_intermediate += cert_example_multi_nocn.csr parse_input/cert_example_multi_nocn.crt cert_example_multi_nocn.crt: cert_example_multi_nocn.csr test-ca_nocn.crt $(OPENSSL) x509 -req -CA test-ca_nocn.crt -CAkey $(test_ca_key_file_rsa) \ -extfile $(test_ca_config_file) -extensions ext_multi_nocn -passin "pass:$(test_ca_pwd_rsa)" \ -set_serial 0xf7c67ff8e9a963f9 -days 3653 -sha1 -in $< > $@ all_final += cert_example_multi_nocn.crt parse_input/test_csr_v3_keyUsage.csr.der: rsa_pkcs1_1024_clear.pem $(OPENSSL) req -new -subj '/CN=etcd' -config $(test_ca_config_file) -key rsa_pkcs1_1024_clear.pem -outform DER -out $@ -reqexts csr_ext_v3_keyUsage parse_input/test_csr_v3_subjectAltName.csr.der: rsa_pkcs1_1024_clear.pem $(OPENSSL) req -new -subj '/CN=etcd' -config $(test_ca_config_file) -key rsa_pkcs1_1024_clear.pem -outform DER -out $@ -reqexts csr_ext_v3_subjectAltName parse_input/test_csr_v3_nsCertType.csr.der: rsa_pkcs1_1024_clear.pem $(OPENSSL) req -new -subj '/CN=etcd' -config $(test_ca_config_file) -key rsa_pkcs1_1024_clear.pem -outform DER -out $@ -reqexts csr_ext_v3_nsCertType parse_input/test_csr_v3_all.csr.der: rsa_pkcs1_1024_clear.pem $(OPENSSL) req -new -subj '/CN=etcd' -config $(test_ca_config_file) -key rsa_pkcs1_1024_clear.pem -outform DER -out $@ -reqexts csr_ext_v3_all parse_input/test_csr_v3_all_malformed_extensions_sequence_tag.csr.der: parse_input/test_csr_v3_all.csr.der (hexdump -ve '1/1 "%.2X"' $< | sed "s/300B0603551D0F040403/200B0603551D0F040403/" | xxd -r -p ) > $@ parse_input/test_csr_v3_all_malformed_extension_id_tag.csr.der: parse_input/test_csr_v3_all.csr.der (hexdump -ve '1/1 "%.2X"' $< | sed "s/0603551D0F0404030201/0703551D0F0404030201/" | xxd -r -p ) > $@ parse_input/test_csr_v3_all_malformed_extension_data_tag.csr.der: parse_input/test_csr_v3_all.csr.der (hexdump -ve '1/1 "%.2X"' $< | sed "s/040403020102302F0603/050403020102302F0603/" | xxd -r -p ) > $@ parse_input/test_csr_v3_all_malformed_extension_data_len1.csr.der: parse_input/test_csr_v3_all.csr.der (hexdump -ve '1/1 "%.2X"' $< | sed "s/040403020102302F0603/040503020102302F0603/" | xxd -r -p ) > $@ parse_input/test_csr_v3_all_malformed_extension_data_len2.csr.der: parse_input/test_csr_v3_all.csr.der (hexdump -ve '1/1 "%.2X"' $< | sed "s/040403020102302F0603/040303020102302F0603/" | xxd -r -p ) > $@ parse_input/test_csr_v3_all_malformed_extension_key_usage_bitstream_tag.csr.der: parse_input/test_csr_v3_all.csr.der (hexdump -ve '1/1 "%.2X"' $< | sed "s/03020102302F0603551D/04020102302F0603551D/" | xxd -r -p ) > $@ parse_input/test_csr_v3_all_malformed_extension_subject_alt_name_sequence_tag.csr.der: parse_input/test_csr_v3_all.csr.der (hexdump -ve '1/1 "%.2X"' $< | sed "s/3026A02406082B060105/4026A02406082B060105/" | xxd -r -p ) > $@ parse_input/test_csr_v3_all_malformed_extension_ns_cert_bitstream_tag.csr.der: parse_input/test_csr_v3_all.csr.der (hexdump -ve '1/1 "%.2X"' $< | sed "s/03020780300D06092A86/04020780300D06092A86/" | xxd -r -p ) > $@ parse_input/test_csr_v3_all_malformed_duplicated_extension.csr.der: parse_input/test_csr_v3_all.csr.der (hexdump -ve '1/1 "%.2X"' $< | sed "s/551D11/551D0F/" | xxd -r -p ) > $@ parse_input/test_csr_v3_all_malformed_extension_type_oid.csr.der: parse_input/test_csr_v3_all.csr.der (hexdump -ve '1/1 "%.2X"' $< | sed "s/551D11/551DFF/" | xxd -r -p ) > $@ parse_input/test_csr_v3_all_malformed_attributes_sequence_tag.csr.der: parse_input/test_csr_v3_all.csr.der (hexdump -ve '1/1 "%.2X"' $< | sed "s/306006092A864886F70D/406006092A864886F70D/" | xxd -r -p ) > $@ parse_input/test_csr_v3_all_malformed_attributes_id_tag.csr.der: parse_input/test_csr_v3_all.csr.der (hexdump -ve '1/1 "%.2X"' $< | sed "s/06092A864886F70D0109/07092A864886F70D0109/" | xxd -r -p ) > $@ parse_input/test_csr_v3_all_malformed_attributes_extension_request.csr.der: parse_input/test_csr_v3_all.csr.der (hexdump -ve '1/1 "%.2X"' $< | sed "s/2A864886F70D01090E/2A864886F70D01090F/" | xxd -r -p ) > $@ parse_input/test_csr_v3_all_malformed_attributes_extension_request_set_tag.csr.der: parse_input/test_csr_v3_all.csr.der (hexdump -ve '1/1 "%.2X"' $< | sed "s/31533051300B0603551D/32533051300B0603551D/" | xxd -r -p ) > $@ parse_input/test_csr_v3_all_malformed_attributes_extension_request_sequence_tag.csr.der: parse_input/test_csr_v3_all.csr.der (hexdump -ve '1/1 "%.2X"' $< | sed "s/3051300B0603551D0F04/3151300B0603551D0F04/" | xxd -r -p ) > $@ parse_input/test_csr_v3_all_malformed_attributes_len1.csr.der: parse_input/test_csr_v3_all.csr.der (hexdump -ve '1/1 "%.2X"' $< | sed "s/306006092A864886F70D/306106092A864886F70D/" | xxd -r -p ) > $@ parse_input/test_csr_v3_all_malformed_attributes_len2.csr.der: parse_input/test_csr_v3_all.csr.der (hexdump -ve '1/1 "%.2X"' $< | sed "s/306006092A864886F70D/305906092A864886F70D/" | xxd -r -p ) > $@ parse_input/test_csr_v3_all_malformed_attributes_extension_request_sequence_len1.csr.der: parse_input/test_csr_v3_all.csr.der (hexdump -ve '1/1 "%.2X"' $< | sed "s/3051300B0603551D0F04/3052300B0603551D0F04/" | xxd -r -p ) > $@ parse_input/test_csr_v3_all_malformed_attributes_extension_request_sequence_len2.csr.der: parse_input/test_csr_v3_all.csr.der (hexdump -ve '1/1 "%.2X"' $< | sed "s/3051300B0603551D0F04/3050300B0603551D0F04/" | xxd -r -p ) > $@ parse_input/test_cert_rfc822name.crt.der: cert_example_multi.csr $(OPENSSL) x509 -req -CA $(test_ca_crt) -CAkey $(test_ca_key_file_rsa) -extfile $(test_ca_config_file) -outform DER -extensions rfc822name_names -passin "pass:$(test_ca_pwd_rsa)" -set_serial 17 -days 3653 -sha256 -in $< > $@ $(test_ca_key_file_rsa_alt):test-ca.opensslconf $(OPENSSL) genrsa -out $@ 2048 test-ca-alt.csr: $(test_ca_key_file_rsa_alt) $(test_ca_config_file) $(OPENSSL) req -new -config $(test_ca_config_file) -key $(test_ca_key_file_rsa_alt) -subj "/C=NL/O=PolarSSL/CN=PolarSSL Test CA" -out $@ all_intermediate += test-ca-alt.csr test-ca-alt.crt: $(test_ca_key_file_rsa_alt) $(test_ca_config_file) test-ca-alt.csr $(OPENSSL) req -x509 -config $(test_ca_config_file) -key $(test_ca_key_file_rsa_alt) -set_serial 0 -days 3653 -sha256 -in test-ca-alt.csr -out $@ all_final += test-ca-alt.crt test-ca-alt-good.crt: test-ca-alt.crt test-ca-sha256.crt cat test-ca-alt.crt test-ca-sha256.crt > $@ all_final += test-ca-alt-good.crt test-ca-good-alt.crt: test-ca-alt.crt test-ca-sha256.crt cat test-ca-sha256.crt test-ca-alt.crt > $@ all_final += test-ca-good-alt.crt test_ca_crt_file_ec = test-ca2.crt test_ca_key_file_ec = test-ca2.key test-ca2.req.sha256: $(test_ca_key_file_ec) $(MBEDTLS_CERT_REQ) output_file=$@ filename=$(test_ca_key_file_ec) \ subject_name="C=NL,O=PolarSSL,CN=Polarssl Test EC CA" md=SHA256 all_intermediate += test-ca2.req.sha256 test-ca2.crt: $(test_ca_key_file_ec) test-ca2.req.sha256 $(MBEDTLS_CERT_WRITE) is_ca=1 serial=13926223505202072808 selfsign=1 \ request_file=test-ca2.req.sha256 \ issuer_name="C=NL,O=PolarSSL,CN=Polarssl Test EC CA" \ issuer_key=$(test_ca_key_file_ec) \ not_before=20190210144400 not_after=20290210144400 \ md=SHA256 version=3 output_file=$@ all_final += test-ca2.crt test-ca2.ku-%.crt: test-ca2.ku-%.crt.openssl.v3_ext $(test_ca_key_file_ec) test-ca2.req.sha256 $(OPENSSL) x509 -req -in test-ca2.req.sha256 -extfile $< \ -signkey $(test_ca_key_file_ec) -days 3653 -out $@ all_final += test-ca2.ku-crl.crt \ test-ca2.ku-crt.crt \ test-ca2.ku-crt_crl.crt \ test-ca2.ku-ds.crt test-ca2-future.crt: $(test_ca_key_file_ec) test-ca2.req.sha256 $(MBEDTLS_CERT_WRITE) is_ca=1 serial=13926223505202072808 request_file=test-ca2.req.sha256 selfsign=1 \ issuer_name="C=NL,O=PolarSSL,CN=Polarssl Test EC CA" issuer_key=$(test_ca_key_file_ec) \ not_before=20290210144400 not_after=20390210144400 md=SHA256 version=3 output_file=$@ all_intermediate += test-ca2-future.crt test_ca_ec_cat := # files that concatenate different crt test-ca2_cat-future-invalid.crt: test-ca2-future.crt server6.crt test_ca_ec_cat += test-ca2_cat-future-invalid.crt test-ca2_cat-future-present.crt: test-ca2-future.crt test-ca2.crt test_ca_ec_cat += test-ca2_cat-future-present.crt test-ca2_cat-present-future.crt: test-ca2.crt test-ca2-future.crt test_ca_ec_cat += test-ca2_cat-present-future.crt test-ca2_cat-present-past.crt: test-ca2.crt test-ca2-expired.crt test_ca_ec_cat += test-ca2_cat-present-past.crt test-ca2_cat-past-invalid.crt: test-ca2-expired.crt server6.crt test_ca_ec_cat += test-ca2_cat-past-invalid.crt test-ca2_cat-past-present.crt: test-ca2-expired.crt test-ca2.crt test_ca_ec_cat += test-ca2_cat-past-present.crt $(test_ca_ec_cat): cat $^ > $@ all_final += $(test_ca_ec_cat) parse_input/test-ca-any_policy.crt: $(test_ca_key_file_rsa) test-ca.req.sha256 $(OPENSSL) req -x509 -config $(test_ca_config_file) -extensions v3_any_policy_ca \ -key $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" \ -set_serial 0 -days 3653 -sha256 -in test-ca.req.sha256 -out $@ parse_input/test-ca-any_policy_ec.crt: $(test_ca_key_file_ec) test-ca.req_ec.sha256 $(OPENSSL) req -x509 -config $(test_ca_config_file) -extensions v3_any_policy_ca \ -key $(test_ca_key_file_ec) -set_serial 0 -days 3653 -sha256 \ -in test-ca.req_ec.sha256 -out $@ parse_input/test-ca-any_policy_with_qualifier.crt: $(test_ca_key_file_rsa) test-ca.req.sha256 $(OPENSSL) req -x509 -config $(test_ca_config_file) -extensions v3_any_policy_qualifier_ca -key $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 0 -days 3653 -sha256 -in test-ca.req.sha256 -out $@ parse_input/test-ca-any_policy_with_qualifier_ec.crt: $(test_ca_key_file_ec) test-ca.req_ec.sha256 $(OPENSSL) req -x509 -config $(test_ca_config_file) -extensions v3_any_policy_qualifier_ca -key $(test_ca_key_file_ec) -set_serial 0 -days 3653 -sha256 -in test-ca.req_ec.sha256 -out $@ parse_input/test-ca-multi_policy.crt: $(test_ca_key_file_rsa) test-ca.req.sha256 $(OPENSSL) req -x509 -config $(test_ca_config_file) -extensions v3_multi_policy_ca -key $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 0 -days 3653 -sha256 -in test-ca.req.sha256 -out $@ parse_input/test-ca-multi_policy_ec.crt: $(test_ca_key_file_ec) test-ca.req_ec.sha256 $(OPENSSL) req -x509 -config $(test_ca_config_file) -extensions v3_multi_policy_ca -key $(test_ca_key_file_ec) -set_serial 0 -days 3653 -sha256 -in test-ca.req_ec.sha256 -out $@ parse_input/test-ca-unsupported_policy.crt: $(test_ca_key_file_rsa) test-ca.req.sha256 $(OPENSSL) req -x509 -config $(test_ca_config_file) -extensions v3_unsupported_policy_ca -key $(test_ca_key_file_rsa) -passin "pass:$(test_ca_pwd_rsa)" -set_serial 0 -days 3653 -sha256 -in test-ca.req.sha256 -out $@ parse_input/test-ca-unsupported_policy_ec.crt: $(test_ca_key_file_ec) test-ca.req_ec.sha256 $(OPENSSL) req -x509 -config $(test_ca_config_file) -extensions v3_unsupported_policy_ca -key $(test_ca_key_file_ec) -set_serial 0 -days 3653 -sha256 -in test-ca.req_ec.sha256 -out $@ test-ca.req_ec.sha256: $(test_ca_key_file_ec) $(MBEDTLS_CERT_REQ) output_file=$@ filename=$(test_ca_key_file_ec) subject_name="C=NL, O=PolarSSL, CN=Polarssl Test EC CA" md=SHA256 all_intermediate += test-ca.req_ec.sha256 test-ca2.crt.der: $(test_ca_crt_file_ec) $(OPENSSL) x509 -in $(test_ca_crt_file_ec) -out $@ -inform PEM -outform DER all_final += test-ca2.crt.der test-ca2.key.der: $(test_ca_key_file_ec) $(OPENSSL) pkey -in $(test_ca_key_file_ec) -out $@ -inform PEM -outform DER all_final += test-ca2.key.der test_ca_crt_cat12 = test-ca_cat12.crt $(test_ca_crt_cat12): $(test_ca_crt) $(test_ca_crt_file_ec) cat $(test_ca_crt) $(test_ca_crt_file_ec) > $@ all_final += $(test_ca_crt_cat12) test_ca_crt_cat21 = test-ca_cat21.crt $(test_ca_crt_cat21): $(test_ca_crt) $(test_ca_crt_file_ec) cat $(test_ca_crt_file_ec) $(test_ca_crt) > $@ all_final += $(test_ca_crt_cat21) test-int-ca.csr: test-int-ca.key $(test_ca_config_file) $(OPENSSL) req -new -config $(test_ca_config_file) -key test-int-ca.key -subj "/C=NL/O=PolarSSL/CN=PolarSSL Test Intermediate CA" -out $@ test-int-ca2.csr: test-int-ca2.key $(test_ca_config_file) $(OPENSSL) req -new -config $(test_ca_config_file) -key test-int-ca2.key \ -subj "/C=NL/O=PolarSSL/CN=PolarSSL Test Intermediate EC CA" -out $@ test-int-ca3.csr: test-int-ca3.key $(test_ca_config_file) $(OPENSSL) req -new -config $(test_ca_config_file) -key test-int-ca3.key \ -subj "/C=UK/O=mbed TLS/CN=mbed TLS Test intermediate CA 3" -out $@ all_intermediate += test-int-ca.csr test-int-ca2.csr test-int-ca3.csr test-int-ca.crt: $(test_ca_crt_file_ec) $(test_ca_key_file_ec) $(test_ca_config_file) test-int-ca.csr $(OPENSSL) x509 -req -extfile $(test_ca_config_file) -extensions v3_ca \ -CA $(test_ca_crt_file_ec) -CAkey $(test_ca_key_file_ec) \ -set_serial 14 -days 3653 -sha256 -in test-int-ca.csr -out $@ test-int-ca2.crt: $(test_ca_key_file_rsa) $(test_ca_crt) $(test_ca_config_file) test-int-ca2.csr $(OPENSSL) x509 -req -extfile $(test_ca_config_file) -extensions v3_ca -CA $(test_ca_crt) \ -CAkey $(test_ca_key_file_rsa) -set_serial 15 -days 3653 -sha256 -in test-int-ca2.csr \ -passin "pass:$(test_ca_pwd_rsa)" -out $@ # Note: This requests openssl version >= 3.x.xx test-int-ca3.crt: test-int-ca2.crt test-int-ca2.key $(test_ca_config_file) test-int-ca3.csr $(OPENSSL) x509 -req -extfile $(test_ca_config_file) -extensions no_subj_auth_id \ -CA test-int-ca2.crt -CAkey test-int-ca2.key -set_serial 77 -days 3653 \ -sha256 -in test-int-ca3.csr -out $@ test-int-ca-exp.crt: $(test_ca_crt_file_ec) $(test_ca_key_file_ec) $(test_ca_config_file) test-int-ca.csr $(FAKETIME) -f -3653d $(OPENSSL) x509 -req -extfile $(test_ca_config_file) -extensions v3_ca -CA $(test_ca_crt_file_ec) -CAkey $(test_ca_key_file_ec) -set_serial 14 -days 3653 -sha256 -in test-int-ca.csr -out $@ all_final += test-int-ca-exp.crt test-int-ca.crt test-int-ca2.crt test-int-ca3.crt enco-cert-utf8str.pem: rsa_pkcs1_1024_clear.pem $(MBEDTLS_CERT_WRITE) subject_key=rsa_pkcs1_1024_clear.pem subject_name="CN=dw.yonan.net" issuer_crt=enco-ca-prstr.pem issuer_key=rsa_pkcs1_1024_clear.pem not_before=20190210144406 not_after=20290210144406 md=SHA1 version=3 output_file=$@ parse_input/crl-idp.pem: $(test_ca_crt) $(test_ca_key_file_rsa) $(test_ca_config_file) $(OPENSSL) ca -gencrl -batch -cert $(test_ca_crt) -keyfile $(test_ca_key_file_rsa) -key $(test_ca_pwd_rsa) -config $(test_ca_config_file) -name test_ca -md sha256 -crldays 3653 -crlexts crl_ext_idp -out $@ parse_input/crl-idpnc.pem: $(test_ca_crt) $(test_ca_key_file_rsa) $(test_ca_config_file) $(OPENSSL) ca -gencrl -batch -cert $(test_ca_crt) -keyfile $(test_ca_key_file_rsa) -key $(test_ca_pwd_rsa) -config $(test_ca_config_file) -name test_ca -md sha256 -crldays 3653 -crlexts crl_ext_idp_nc -out $@ cli_crt_key_file_rsa = cli-rsa.key cli_crt_extensions_file = cli.opensslconf cli-rsa.csr: $(cli_crt_key_file_rsa) $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Client 2" md=SHA1 all_intermediate += cli-rsa.csr cli-rsa-sha1.crt: cli-rsa.csr $(MBEDTLS_CERT_WRITE) request_file=$< serial=4 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA1 version=3 output_file=$@ cli-rsa-sha256.crt: cli-rsa.csr $(MBEDTLS_CERT_WRITE) request_file=$< serial=4 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA256 version=3 output_file=$@ all_final += cli-rsa-sha256.crt cli-rsa-sha256.crt.der: cli-rsa-sha256.crt $(OPENSSL) x509 -in $< -out $@ -inform PEM -outform DER all_final += cli-rsa-sha256.crt.der parse_input/cli-rsa-sha256-badalg.crt.der: cli-rsa-sha256.crt.der hexdump -ve '1/1 "%.2X"' $< | sed "s/06092A864886F70D01010B0500/06092A864886F70D01010B0900/2" | xxd -r -p > $@ cli-rsa.key.der: $(cli_crt_key_file_rsa) $(OPENSSL) pkey -in $< -out $@ -inform PEM -outform DER all_final += cli-rsa.key.der test_ca_int_rsa1 = test-int-ca.crt test_ca_int_ec = test-int-ca2.crt test_ca_int_key_file_ec = test-int-ca2.key # server7* server7.csr: server7.key $(OPENSSL) req -new -key server7.key -subj "/C=NL/O=PolarSSL/CN=localhost" -out $@ all_intermediate += server7.csr server7.crt: server7.csr $(test_ca_int_rsa1) $(OPENSSL) x509 -req -extfile $(cli_crt_extensions_file) -extensions cli-rsa \ -CA $(test_ca_int_rsa1) -CAkey test-int-ca.key \ -set_serial 16 -days 3653 -sha256 -in server7.csr > $@ all_final += server7.crt server7-expired.crt: server7.csr $(test_ca_int_rsa1) $(FAKETIME) -f -3653d $(OPENSSL) x509 -req -extfile $(cli_crt_extensions_file) -extensions cli-rsa -CA $(test_ca_int_rsa1) -CAkey test-int-ca.key -set_serial 16 -days 3653 -sha256 -in server7.csr | cat - $(test_ca_int_rsa1) > $@ all_final += server7-expired.crt server7-future.crt: server7.csr $(test_ca_int_rsa1) $(FAKETIME) -f +3653d $(OPENSSL) x509 -req -extfile $(cli_crt_extensions_file) -extensions cli-rsa -CA $(test_ca_int_rsa1) -CAkey test-int-ca.key -set_serial 16 -days 3653 -sha256 -in server7.csr | cat - $(test_ca_int_rsa1) > $@ all_final += server7-future.crt server7-badsign.crt: server7.crt $(test_ca_int_rsa1) { head -n-2 $<; tail -n-2 $< | sed -e '1s/0\(=*\)$$/_\1/' -e '1s/[^_=]\(=*\)$$/0\1/' -e '1s/_/1/'; cat $(test_ca_int_rsa1); } > $@ all_final += server7-badsign.crt parse_input/server7_int-ca.crt server7_int-ca.crt: server7.crt $(test_ca_int_rsa1) cat server7.crt $(test_ca_int_rsa1) > $@ all_final += server7_int-ca.crt parse_input/server7_pem_space.crt: server7.crt $(test_ca_int_rsa1) cat server7.crt $(test_ca_int_rsa1) | sed '4s/\(.\)$$/ \1/' > $@ parse_input/server7_all_space.crt: server7.crt $(test_ca_int_rsa1) { cat server7.crt | sed '4s/\(.\)$$/ \1/'; cat test-int-ca.crt | sed '4s/\(.\)$$/ \1/'; } > $@ parse_input/server7_trailing_space.crt: server7.crt $(test_ca_int_rsa1) cat server7.crt $(test_ca_int_rsa1) | sed 's/\(.\)$$/\1 /' > $@ server7_int-ca_ca2.crt: server7.crt $(test_ca_int_rsa1) $(test_ca_crt_file_ec) cat server7.crt $(test_ca_int_rsa1) $(test_ca_crt_file_ec) > $@ all_final += server7_int-ca_ca2.crt server7_int-ca-exp.crt: server7.crt test-int-ca-exp.crt cat server7.crt test-int-ca-exp.crt > $@ all_final += server7_int-ca-exp.crt server7_spurious_int-ca.crt: server7.crt $(test_ca_int_ec) $(test_ca_int_rsa1) cat server7.crt $(test_ca_int_ec) $(test_ca_int_rsa1) > $@ all_final += server7_spurious_int-ca.crt # server8* server8.crt: server8.key $(MBEDTLS_CERT_WRITE) subject_key=$< subject_name="C=NL, O=PolarSSL, CN=localhost" serial=17 \ issuer_crt=$(test_ca_int_ec) issuer_key=$(test_ca_int_key_file_ec) \ not_before=20190210144406 not_after=20290210144406 \ md=SHA256 version=3 output_file=$@ all_final += server8.crt server8_int-ca2.crt: server8.crt $(test_ca_int_ec) cat $^ > $@ all_final += server8_int-ca2.crt cli2.req.sha256: cli2.key $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Test Client 2" md=SHA256 all_intermediate += cli2.req.sha256 all_final += server1.req.sha1 cli2.crt: cli2.req.sha256 $(MBEDTLS_CERT_WRITE) request_file=cli2.req.sha256 serial=13 selfsign=0 issuer_name="C=NL,O=PolarSSL,CN=PolarSSL Test EC CA" issuer_key=$(test_ca_key_file_ec) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144400 not_after=20290210144400 md=SHA256 version=3 output_file=$@ all_final += cli2.crt cli2.crt.der: cli2.crt $(OPENSSL) x509 -in $< -out $@ -inform PEM -outform DER all_final += cli2.crt.der cli2.key.der: cli2.key $(OPENSSL) pkey -in $< -out $@ -inform PEM -outform DER all_final += cli2.key.der server5_pwd_ec = PolarSSLTest server5.crt.der: server5.crt $(OPENSSL) x509 -in $< -out $@ -inform PEM -outform DER all_final += server5.crt.der server5.key.der: server5.key $(OPENSSL) pkey -in $< -out $@ -inform PEM -outform DER all_final += server5.key.der server5.key.enc: server5.key $(OPENSSL) ec -aes256 -in $< -out $@ -passout "pass:$(server5_pwd_ec)" all_final += server5.key.enc server5-ss-expired.crt: server5.key $(FAKETIME) -f -3653d $(OPENSSL) req -x509 -new -subj "/C=UK/O=mbed TLS/OU=testsuite/CN=localhost" -days 3653 -sha256 -key $< -out $@ all_final += server5-ss-expired.crt # try to forge a copy of test-int-ca3 with different key server5-ss-forgeca.crt: server5.key $(OPENSSL) req -x509 -new -subj "/C=UK/O=mbed TLS/CN=mbed TLS Test intermediate CA 3" \ -set_serial 77 -config $(test_ca_config_file) -extensions noext_ca \ -days 3650 -sha256 -key $< -out $@ all_final += server5-ss-forgeca.crt server5-selfsigned.crt: server5.key openssl req -x509 -key server5.key \ -sha256 -days 3650 -nodes \ -addext basicConstraints=critical,CA:FALSE \ -addext keyUsage=critical,digitalSignature \ -addext subjectKeyIdentifier=hash \ -addext authorityKeyIdentifier=none \ -set_serial 0x53a2cb4b124ead837da894b2 \ -subj "/CN=selfsigned/OU=testing/O=PolarSSL/C=NL" \ -out $@ all_final += server5-selfsigned.crt parse_input/server5-othername.crt.der: server5.key $(OPENSSL) req -x509 -new -subj "/C=UK/O=Mbed TLS/CN=Mbed TLS othername SAN" -set_serial 77 -config $(test_ca_config_file) -extensions othername_san -days 3650 -sha256 -key $< -outform der -out $@ parse_input/server5-nonprintable_othername.crt.der: server5.key $(OPENSSL) req -x509 -new -subj "/C=UK/O=Mbed TLS/CN=Mbed TLS non-printable othername SAN" -set_serial 77 -config $(test_ca_config_file) -extensions nonprintable_othername_san -days 3650 -sha256 -key $< -outform der -out $@ parse_input/server5-unsupported_othername.crt.der: server5.key $(OPENSSL) req -x509 -new -subj "/C=UK/O=Mbed TLS/CN=Mbed TLS unsupported othername SAN" -set_serial 77 -config $(test_ca_config_file) -extensions unsupported_othername_san -days 3650 -sha256 -key $< -outform der -out $@ parse_input/server5-fan.crt.der: server5.key $(OPENSSL) req -x509 -new -subj "/C=UK/O=Mbed TLS/CN=Mbed TLS FAN" -set_serial 77 -config $(test_ca_config_file) -extensions fan_cert -days 3650 -sha256 -key server5.key -outform der -out $@ server5-tricky-ip-san.crt.der: server5.key $(OPENSSL) req -x509 -new -subj "/C=UK/O=Mbed TLS/CN=Mbed TLS Tricky IP SAN" -set_serial 77 -config $(test_ca_config_file) -extensions tricky_ip_san -days 3650 -sha256 -key server5.key -outform der -out $@ all_final += server5-tricky-ip-san.crt.der # malformed IP length server5-tricky-ip-san-malformed-len.crt.der: server5-tricky-ip-san.crt.der hexdump -ve '1/1 "%.2X"' $< | sed "s/87046162636487106162/87056162636487106162/" | xxd -r -p > $@ parse_input/server5-directoryname.crt.der: server5.key $(OPENSSL) req -x509 -outform der -new -subj "/C=UK/O=Mbed TLS/CN=Mbed TLS directoryName SAN" -set_serial 77 -config $(test_ca_config_file) -extensions directory_name_san -days 3650 -sha256 -key server5.key -out $@ parse_input/server5-two-directorynames.crt.der: server5.key $(OPENSSL) req -x509 -outform der -new -subj "/C=UK/O=Mbed TLS/CN=Mbed TLS directoryName SAN" -set_serial 77 -config $(test_ca_config_file) -extensions two_directorynames -days 3650 -sha256 -key server5.key -out $@ server5-der0.crt: server5.crt.der cp $< $@ server5-der1a.crt: server5.crt.der cp $< $@ echo '00' | xxd -r -p | dd of=$@ bs=1 seek=$$(wc -c <$<) conv=notrunc server5-der1b.crt: server5.crt.der cp $< $@ echo 'c1' | xxd -r -p | dd of=$@ bs=1 seek=$$(wc -c <$<) conv=notrunc server5-der2.crt: server5.crt.der cp $< $@ echo 'b90a' | xxd -r -p | dd of=$@ bs=1 seek=$$(wc -c <$<) conv=notrunc server5-der4.crt: server5.crt.der cp $< $@ echo 'a710945f' | xxd -r -p | dd of=$@ bs=1 seek=$$(wc -c <$<) conv=notrunc server5-der8.crt: server5.crt.der cp $< $@ echo 'a4a7ff27267aaa0f' | xxd -r -p | dd of=$@ bs=1 seek=$$(wc -c <$<) conv=notrunc server5-der9.crt: server5.crt.der cp $< $@ echo 'cff8303376ffa47a29' | xxd -r -p | dd of=$@ bs=1 seek=$$(wc -c <$<) conv=notrunc all_final += server5-der0.crt server5-der1b.crt server5-der4.crt \ server5-der9.crt server5-der1a.crt server5-der2.crt \ server5-der8.crt # directoryname sequence tag malformed parse_input/server5-directoryname-seq-malformed.crt.der: parse_input/server5-two-directorynames.crt.der hexdump -ve '1/1 "%.2X"' $< | sed "s/62A4473045310B/62A4473145310B/" | xxd -r -p > $@ # Second directoryname OID length malformed 03 -> 15 parse_input/server5-second-directoryname-oid-malformed.crt.der: parse_input/server5-two-directorynames.crt.der hexdump -ve '1/1 "%.2X"' $< | sed "s/0355040A0C0A4D414C464F524D5F4D45/1555040A0C0A4D414C464F524D5F4D45/" | xxd -r -p > $@ parse_input/rsa_single_san_uri.crt.der rsa_single_san_uri.crt.der: rsa_single_san_uri.key $(OPENSSL) req -x509 -outform der -nodes -days 7300 -newkey rsa:2048 -key $< -out $@ -addext "subjectAltName = URI:urn:example.com:5ff40f78-9210-494f-8206-c2c082f0609c" -extensions 'v3_req' -subj "/C=UK/O=Mbed TLS/CN=Mbed TLS URI SAN" parse_input/rsa_multiple_san_uri.crt.der: rsa_multiple_san_uri.key $(OPENSSL) req -x509 -outform der -nodes -days 7300 -newkey rsa:2048 -key $< -out $@ -addext "subjectAltName = URI:urn:example.com:5ff40f78-9210-494f-8206-c2c082f0609c, URI:urn:example.com:5ff40f78-9210-494f-8206-abcde1234567" -extensions 'v3_req' -subj "/C=UK/O=Mbed TLS/CN=Mbed TLS URI SAN" test-int-ca3-badsign.crt: test-int-ca3.crt { head -n-2 $<; tail -n-2 $< | sed -e '1s/0\(=*\)$$/_\1/' -e '1s/[^_=]\(=*\)$$/0\1/' -e '1s/_/1/'; } > $@ all_final += test-int-ca3-badsign.crt # server9* server9.csr: server9.key $(OPENSSL) req -new -subj "/C=NL/O=PolarSSL/CN=localhost" \ -key $< -out $@ parse_input/server9.crt server9.crt: server9-sha1.crt cp $< $@ all_final += server9.crt all_intermediate += server9.csr server9-sha1.crt server9-%.crt: server9.csr $(test_ca_crt) $(test_ca_key_file_rsa) $(OPENSSL) x509 -req -extfile $(cli_crt_extensions_file) -extensions cli-rsa \ -passin "pass:$(test_ca_pwd_rsa)" -CA $(test_ca_crt) -CAkey $(test_ca_key_file_rsa) \ -set_serial $(SERVER9_CRT_SERIAL) -days 3653 \ -sigopt rsa_padding_mode:pss -sigopt rsa_pss_saltlen:max \ -sigopt rsa_mgf1_md:$(@F:server9-%.crt=%) -$(@F:server9-%.crt=%) \ -in $< -out $@ server9-sha1.crt: SERVER9_CRT_SERIAL=22 parse_input/server9-sha224.crt server9-sha224.crt: SERVER9_CRT_SERIAL=23 parse_input/server9-sha256.crt server9-sha256.crt: SERVER9_CRT_SERIAL=24 parse_input/server9-sha384.crt server9-sha384.crt: SERVER9_CRT_SERIAL=25 parse_input/server9-sha512.crt server9-sha512.crt: SERVER9_CRT_SERIAL=26 all_final += server9-sha224.crt server9-sha256.crt server9-sha384.crt server9-sha512.crt server9-defaults.crt: server9.csr $(test_ca_crt) $(test_ca_key_file_rsa) $(OPENSSL) x509 -req -extfile $(cli_crt_extensions_file) -extensions cli-rsa \ -passin "pass:$(test_ca_pwd_rsa)" -CA $(test_ca_crt) -CAkey $(test_ca_key_file_rsa) \ -set_serial 72 -days 3653 \ -sigopt rsa_padding_mode:pss -sigopt rsa_pss_saltlen:max -sha1 \ -in $< -out $@ all_final += server9-defaults.crt server9-badsign.crt: server9.crt { head -n-2 $<; tail -n-2 $< | sed -e '1s/0\(=*\)$$/_\1/' -e '1s/[^_=]\(=*\)$$/0\1/' -e '1s/_/1/'; } > $@ all_final += server9-badsign.crt server9-with-ca.crt: server9.crt $(test_ca_crt) cat $^ > $@ all_final += server9-with-ca.crt # FIXME: This file needs special sequence. It should be update manually server9-bad-saltlen.crt: server9.csr $(test_ca_crt) $(test_ca_key_file_rsa) false server9-bad-mgfhash.crt: server9.csr $(test_ca_crt) $(test_ca_key_file_rsa) $(OPENSSL) x509 -req -extfile $(cli_crt_extensions_file) -extensions cli-rsa \ -passin "pass:$(test_ca_pwd_rsa)" -CA $(test_ca_crt) -CAkey $(test_ca_key_file_rsa) \ -set_serial 24 -days 3653 \ -sigopt rsa_padding_mode:pss -sigopt rsa_pss_saltlen:max \ -sigopt rsa_mgf1_md:sha224 -sha256 \ -in $< -out $@ all_final += server9-bad-mgfhash.crt # server10* server10.crt: server10.key test-int-ca3.crt test-int-ca3.key $(MBEDTLS_CERT_WRITE) subject_key=$< subject_name="CN=localhost" serial=75 \ issuer_crt=test-int-ca3.crt issuer_key=test-int-ca3.key \ subject_identifier=0 authority_identifier=0 \ not_before=20190210144406 not_after=20290210144406 \ md=SHA256 version=3 output_file=$@ all_final += server10.crt server10-badsign.crt: server10.crt { head -n-2 $<; tail -n-2 $< | sed -e '1s/0\(=*\)$$/_\1/' -e '1s/[^_=]\(=*\)$$/0\1/' -e '1s/_/1/'; } > $@ all_final += server10-badsign.crt server10-bs_int3.pem: server10-badsign.crt test-int-ca3.crt cat server10-badsign.crt test-int-ca3.crt > $@ all_final += server10-bs_int3.pem server10_int3-bs.pem: server10.crt test-int-ca3-badsign.crt cat server10.crt test-int-ca3-badsign.crt > $@ all_final += server10_int3-bs.pem server10_int3_int-ca2.crt: server10.crt test-int-ca3.crt $(test_ca_int_ec) cat $^ > $@ all_final += server10_int3_int-ca2.crt server10_int3_int-ca2_ca.crt: server10.crt test-int-ca3.crt $(test_ca_int_ec) $(test_ca_crt) cat $^ > $@ all_final += server10_int3_int-ca2_ca.crt server10_int3_spurious_int-ca2.crt: server10.crt test-int-ca3.crt $(test_ca_int_rsa1) $(test_ca_int_ec) cat $^ > $@ all_final += server10_int3_spurious_int-ca2.crt rsa_pkcs1_2048_public.pem: server8.key $(OPENSSL) rsa -in $< -outform PEM -RSAPublicKey_out -out $@ all_final += rsa_pkcs1_2048_public.pem rsa_pkcs1_2048_public.der: rsa_pkcs1_2048_public.pem $(OPENSSL) rsa -RSAPublicKey_in -in $< -outform DER -RSAPublicKey_out -out $@ all_final += rsa_pkcs1_2048_public.der rsa_pkcs8_2048_public.pem: server8.key $(OPENSSL) rsa -in $< -outform PEM -pubout -out $@ all_final += rsa_pkcs8_2048_public.pem rsa_pkcs8_2048_public.der: rsa_pkcs8_2048_public.pem $(OPENSSL) rsa -pubin -in $< -outform DER -pubout -out $@ all_final += rsa_pkcs8_2048_public.der # Generate crl_cat_*.pem # - crt_cat_*.pem: (1+2) concatenations in various orders: # ec = crl-ec-sha256.pem, ecfut = crl-future.pem # rsa = crl.pem, rsabadpem = same with pem error, rsaexp = crl_expired.pem crl_cat_ec-rsa.pem:crl-ec-sha256.pem crl.pem cat $^ > $@ crl_cat_rsa-ec.pem:crl.pem crl-ec-sha256.pem cat $^ > $@ all_final += crl_cat_ec-rsa.pem crl_cat_rsa-ec.pem authorityKeyId_subjectKeyId.crt.der: $(OPENSSL) req -x509 -nodes -days 7300 -key server2.key -outform DER -out $@ -config authorityKeyId_subjectKeyId.conf -extensions 'v3_req' -set_serial 593828494303792449134898749208168108403991951034 authorityKeyId_no_keyid.crt.der: $(OPENSSL) req -x509 -nodes -days 7300 -key server2.key -outform DER -out $@ -config authorityKeyId_subjectKeyId.conf -extensions 'v3_req_authorityKeyId_no_keyid' -set_serial 593828494303792449134898749208168108403991951034 authorityKeyId_no_issuer.crt.der: $(OPENSSL) req -x509 -nodes -days 7300 -key server2.key -outform DER -out $@ -config authorityKeyId_subjectKeyId.conf -extensions 'v3_req_authorityKeyId_no_issuer' authorityKeyId_no_authorityKeyId.crt.der: $(OPENSSL) req -x509 -nodes -days 7300 -key server2.key -outform DER -out $@ -config authorityKeyId_subjectKeyId.conf -extensions 'v3_req_no_authorityKeyId' authorityKeyId_subjectKeyId_tag_malformed.crt.der: authorityKeyId_subjectKeyId.crt.der hexdump -ve '1/1 "%.2X"' $< | sed "s/0414A505E864B8DCDF600F50124D60A864AF4D8B4393/0114A505E864B8DCDF600F50124D60A864AF4D8B4393/" | xxd -r -p > $@ authorityKeyId_subjectKeyId_tag_len_malformed.crt.der: authorityKeyId_subjectKeyId.crt.der hexdump -ve '1/1 "%.2X"' $< | sed "s/0414A505E864B8DCDF600F50124D60A864AF4D8B4393/0413A505E864B8DCDF600F50124D60A864AF4D8B4393/" | xxd -r -p > $@ authorityKeyId_subjectKeyId_length_malformed.crt.der: authorityKeyId_subjectKeyId.crt.der hexdump -ve '1/1 "%.2X"' $< | sed "s/306D8014A505E864B8DC/306C8014A505E864B8DC/" | xxd -r -p > $@ authorityKeyId_subjectKeyId_sequence_tag_malformed.crt.der: authorityKeyId_subjectKeyId.crt.der hexdump -ve '1/1 "%.2X"' $< | sed "s/6F306D8014A505E864B8/6F006D8014A505E864B8/" | xxd -r -p > $@ authorityKeyId_subjectKeyId_keyid_tag_malformed.crt.der: authorityKeyId_subjectKeyId.crt.der hexdump -ve '1/1 "%.2X"' $< | sed "s/306D8014A505E864B8DC/306D0014A505E864B8DC/" | xxd -r -p > $@ authorityKeyId_subjectKeyId_keyid_tag_len_malformed.crt.der: authorityKeyId_subjectKeyId.crt.der hexdump -ve '1/1 "%.2X"' $< | sed "s/306D8014A505E864B8DC/306D80FFA505E864B8DC/" | xxd -r -p > $@ authorityKeyId_subjectKeyId_issuer_tag1_malformed.crt.der: authorityKeyId_subjectKeyId.crt.der hexdump -ve '1/1 "%.2X"' $< | sed "s/A13FA43D303B310B3009/003FA43D303B310B3009/" | xxd -r -p > $@ authorityKeyId_subjectKeyId_issuer_tag2_malformed.crt.der: authorityKeyId_subjectKeyId.crt.der hexdump -ve '1/1 "%.2X"' $< | sed "s/A43D303B310B30090603/003D303B310B30090603/" | xxd -r -p > $@ authorityKeyId_subjectKeyId_sn_tag_malformed.crt.der: authorityKeyId_subjectKeyId.crt.der hexdump -ve '1/1 "%.2X"' $< | sed "s/8214680430CD074DE63F/8114680430CD074DE63F/" | xxd -r -p > $@ authorityKeyId_subjectKeyId_sn_len_malformed.crt.der: authorityKeyId_subjectKeyId.crt.der hexdump -ve '1/1 "%.2X"' $< | sed "s/8214680430CD074DE63F/8213680430CD074DE63F/" | xxd -r -p > $@ ################################################################ #### Generate various RSA keys ################################################################ ### Password used for PKCS1-encoded encrypted RSA keys keys_rsa_basic_pwd = testkey ### Password used for PKCS8-encoded encrypted RSA keys keys_rsa_pkcs8_pwd = PolarSSLTest ### Basic 1024-, 2048- and 4096-bit unencrypted RSA keys from which ### all other encrypted RSA keys are derived. rsa_pkcs1_1024_clear.pem: $(OPENSSL) genrsa -out $@ 1024 all_final += rsa_pkcs1_1024_clear.pem rsa_pkcs1_2048_clear.pem: $(OPENSSL) genrsa -out $@ 2048 all_final += rsa_pkcs1_2048_clear.pem rsa_pkcs1_4096_clear.pem: $(OPENSSL) genrsa -out $@ 4096 all_final += rsa_pkcs1_4096_clear.pem ### ### PKCS1-encoded, encrypted RSA keys ### ### 1024-bit rsa_pkcs1_1024_des.pem: rsa_pkcs1_1024_clear.pem $(OPENSSL) rsa -des -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" all_final += rsa_pkcs1_1024_des.pem rsa_pkcs1_1024_3des.pem: rsa_pkcs1_1024_clear.pem $(OPENSSL) rsa -des3 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" all_final += rsa_pkcs1_1024_3des.pem rsa_pkcs1_1024_aes128.pem: rsa_pkcs1_1024_clear.pem $(OPENSSL) rsa -aes128 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" all_final += rsa_pkcs1_1024_aes128.pem rsa_pkcs1_1024_aes192.pem: rsa_pkcs1_1024_clear.pem $(OPENSSL) rsa -aes192 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" all_final += rsa_pkcs1_1024_aes192.pem rsa_pkcs1_1024_aes256.pem: rsa_pkcs1_1024_clear.pem $(OPENSSL) rsa -aes256 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" all_final += rsa_pkcs1_1024_aes256.pem keys_rsa_enc_basic_1024: rsa_pkcs1_1024_des.pem rsa_pkcs1_1024_3des.pem rsa_pkcs1_1024_aes128.pem rsa_pkcs1_1024_aes192.pem rsa_pkcs1_1024_aes256.pem # 2048-bit rsa_pkcs1_2048_des.pem: rsa_pkcs1_2048_clear.pem $(OPENSSL) rsa -des -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" all_final += rsa_pkcs1_2048_des.pem rsa_pkcs1_2048_3des.pem: rsa_pkcs1_2048_clear.pem $(OPENSSL) rsa -des3 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" all_final += rsa_pkcs1_2048_3des.pem rsa_pkcs1_2048_aes128.pem: rsa_pkcs1_2048_clear.pem $(OPENSSL) rsa -aes128 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" all_final += rsa_pkcs1_2048_aes128.pem rsa_pkcs1_2048_aes192.pem: rsa_pkcs1_2048_clear.pem $(OPENSSL) rsa -aes192 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" all_final += rsa_pkcs1_2048_aes192.pem rsa_pkcs1_2048_aes256.pem: rsa_pkcs1_2048_clear.pem $(OPENSSL) rsa -aes256 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" all_final += rsa_pkcs1_2048_aes256.pem keys_rsa_enc_basic_2048: rsa_pkcs1_2048_des.pem rsa_pkcs1_2048_3des.pem rsa_pkcs1_2048_aes128.pem rsa_pkcs1_2048_aes192.pem rsa_pkcs1_2048_aes256.pem # 4096-bit rsa_pkcs1_4096_des.pem: rsa_pkcs1_4096_clear.pem $(OPENSSL) rsa -des -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" all_final += rsa_pkcs1_4096_des.pem rsa_pkcs1_4096_3des.pem: rsa_pkcs1_4096_clear.pem $(OPENSSL) rsa -des3 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" all_final += rsa_pkcs1_4096_3des.pem rsa_pkcs1_4096_aes128.pem: rsa_pkcs1_4096_clear.pem $(OPENSSL) rsa -aes128 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" all_final += rsa_pkcs1_4096_aes128.pem rsa_pkcs1_4096_aes192.pem: rsa_pkcs1_4096_clear.pem $(OPENSSL) rsa -aes192 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" all_final += rsa_pkcs1_4096_aes192.pem rsa_pkcs1_4096_aes256.pem: rsa_pkcs1_4096_clear.pem $(OPENSSL) rsa -aes256 -in $< -out $@ -passout "pass:$(keys_rsa_basic_pwd)" all_final += rsa_pkcs1_4096_aes256.pem keys_rsa_enc_basic_4096: rsa_pkcs1_4096_des.pem rsa_pkcs1_4096_3des.pem rsa_pkcs1_4096_aes128.pem rsa_pkcs1_4096_aes192.pem rsa_pkcs1_4096_aes256.pem ### ### PKCS8-v1 encoded, encrypted RSA keys ### ### 1024-bit rsa_pkcs8_pbe_sha1_1024_3des.der: rsa_pkcs1_1024_clear.pem $(OPENSSL) pkcs8 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-3DES all_final += rsa_pkcs8_pbe_sha1_1024_3des.der rsa_pkcs8_pbe_sha1_1024_3des.pem: rsa_pkcs1_1024_clear.pem $(OPENSSL) pkcs8 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-3DES all_final += rsa_pkcs8_pbe_sha1_1024_3des.pem keys_rsa_enc_pkcs8_v1_1024_3des: rsa_pkcs8_pbe_sha1_1024_3des.pem rsa_pkcs8_pbe_sha1_1024_3des.der rsa_pkcs8_pbe_sha1_1024_2des.der: rsa_pkcs1_1024_clear.pem $(OPENSSL) pkcs8 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-2DES all_final += rsa_pkcs8_pbe_sha1_1024_2des.der rsa_pkcs8_pbe_sha1_1024_2des.pem: rsa_pkcs1_1024_clear.pem $(OPENSSL) pkcs8 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-2DES all_final += rsa_pkcs8_pbe_sha1_1024_2des.pem keys_rsa_enc_pkcs8_v1_1024_2des: rsa_pkcs8_pbe_sha1_1024_2des.pem rsa_pkcs8_pbe_sha1_1024_2des.der keys_rsa_enc_pkcs8_v1_1024: keys_rsa_enc_pkcs8_v1_1024_3des keys_rsa_enc_pkcs8_v1_1024_2des ### 2048-bit rsa_pkcs8_pbe_sha1_2048_3des.der: rsa_pkcs1_2048_clear.pem $(OPENSSL) pkcs8 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-3DES all_final += rsa_pkcs8_pbe_sha1_2048_3des.der rsa_pkcs8_pbe_sha1_2048_3des.pem: rsa_pkcs1_2048_clear.pem $(OPENSSL) pkcs8 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-3DES all_final += rsa_pkcs8_pbe_sha1_2048_3des.pem keys_rsa_enc_pkcs8_v1_2048_3des: rsa_pkcs8_pbe_sha1_2048_3des.pem rsa_pkcs8_pbe_sha1_2048_3des.der rsa_pkcs8_pbe_sha1_2048_2des.der: rsa_pkcs1_2048_clear.pem $(OPENSSL) pkcs8 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-2DES all_final += rsa_pkcs8_pbe_sha1_2048_2des.der rsa_pkcs8_pbe_sha1_2048_2des.pem: rsa_pkcs1_2048_clear.pem $(OPENSSL) pkcs8 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-2DES all_final += rsa_pkcs8_pbe_sha1_2048_2des.pem keys_rsa_enc_pkcs8_v1_2048_2des: rsa_pkcs8_pbe_sha1_2048_2des.pem rsa_pkcs8_pbe_sha1_2048_2des.der keys_rsa_enc_pkcs8_v1_2048: keys_rsa_enc_pkcs8_v1_2048_3des keys_rsa_enc_pkcs8_v1_2048_2des ### 4096-bit rsa_pkcs8_pbe_sha1_4096_3des.der: rsa_pkcs1_4096_clear.pem $(OPENSSL) pkcs8 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-3DES all_final += rsa_pkcs8_pbe_sha1_4096_3des.der rsa_pkcs8_pbe_sha1_4096_3des.pem: rsa_pkcs1_4096_clear.pem $(OPENSSL) pkcs8 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-3DES all_final += rsa_pkcs8_pbe_sha1_4096_3des.pem keys_rsa_enc_pkcs8_v1_4096_3des: rsa_pkcs8_pbe_sha1_4096_3des.pem rsa_pkcs8_pbe_sha1_4096_3des.der rsa_pkcs8_pbe_sha1_4096_2des.der: rsa_pkcs1_4096_clear.pem $(OPENSSL) pkcs8 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-2DES all_final += rsa_pkcs8_pbe_sha1_4096_2des.der rsa_pkcs8_pbe_sha1_4096_2des.pem: rsa_pkcs1_4096_clear.pem $(OPENSSL) pkcs8 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" -topk8 -v1 PBE-SHA1-2DES all_final += rsa_pkcs8_pbe_sha1_4096_2des.pem keys_rsa_enc_pkcs8_v1_4096_2des: rsa_pkcs8_pbe_sha1_4096_2des.pem rsa_pkcs8_pbe_sha1_4096_2des.der keys_rsa_enc_pkcs8_v1_4096: keys_rsa_enc_pkcs8_v1_4096_3des keys_rsa_enc_pkcs8_v1_4096_2des ### ### PKCS8-v2 encoded, encrypted RSA keys, no PRF specified (default for OpenSSL1.0: hmacWithSHA1) ### ### 1024-bit rsa_pkcs8_pbes2_pbkdf2_1024_3des.der: rsa_pkcs1_1024_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des.der rsa_pkcs8_pbes2_pbkdf2_1024_3des.pem: rsa_pkcs1_1024_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des.pem keys_rsa_enc_pkcs8_v2_1024_3des: rsa_pkcs8_pbes2_pbkdf2_1024_3des.der rsa_pkcs8_pbes2_pbkdf2_1024_3des.pem rsa_pkcs8_pbes2_pbkdf2_1024_des.der: rsa_pkcs1_1024_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des.der rsa_pkcs8_pbes2_pbkdf2_1024_des.pem: rsa_pkcs1_1024_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des.pem keys_rsa_enc_pkcs8_v2_1024_des: rsa_pkcs8_pbes2_pbkdf2_1024_des.der rsa_pkcs8_pbes2_pbkdf2_1024_des.pem keys_rsa_enc_pkcs8_v2_1024: keys_rsa_enc_pkcs8_v2_1024_3des keys_rsa_enc_pkcs8_v2_1024_des ### 2048-bit rsa_pkcs8_pbes2_pbkdf2_2048_3des.der: rsa_pkcs1_2048_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des.der rsa_pkcs8_pbes2_pbkdf2_2048_3des.pem: rsa_pkcs1_2048_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des.pem keys_rsa_enc_pkcs8_v2_2048_3des: rsa_pkcs8_pbes2_pbkdf2_2048_3des.der rsa_pkcs8_pbes2_pbkdf2_2048_3des.pem rsa_pkcs8_pbes2_pbkdf2_2048_des.der: rsa_pkcs1_2048_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des.der rsa_pkcs8_pbes2_pbkdf2_2048_des.pem: rsa_pkcs1_2048_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des.pem keys_rsa_enc_pkcs8_v2_2048_des: rsa_pkcs8_pbes2_pbkdf2_2048_des.der rsa_pkcs8_pbes2_pbkdf2_2048_des.pem keys_rsa_enc_pkcs8_v2_2048: keys_rsa_enc_pkcs8_v2_2048_3des keys_rsa_enc_pkcs8_v2_2048_des ### 4096-bit rsa_pkcs8_pbes2_pbkdf2_4096_3des.der: rsa_pkcs1_4096_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des.der rsa_pkcs8_pbes2_pbkdf2_4096_3des.pem: rsa_pkcs1_4096_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des.pem keys_rsa_enc_pkcs8_v2_4096_3des: rsa_pkcs8_pbes2_pbkdf2_4096_3des.der rsa_pkcs8_pbes2_pbkdf2_4096_3des.pem rsa_pkcs8_pbes2_pbkdf2_4096_des.der: rsa_pkcs1_4096_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des.der rsa_pkcs8_pbes2_pbkdf2_4096_des.pem: rsa_pkcs1_4096_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des.pem keys_rsa_enc_pkcs8_v2_4096_des: rsa_pkcs8_pbes2_pbkdf2_4096_des.der rsa_pkcs8_pbes2_pbkdf2_4096_des.pem keys_rsa_enc_pkcs8_v2_4096: keys_rsa_enc_pkcs8_v2_4096_3des keys_rsa_enc_pkcs8_v2_4096_des ### ### PKCS8-v2 encoded, encrypted RSA keys, PRF hmacWithSHA224 ### ### 1024-bit rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha224.der: rsa_pkcs1_1024_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA224 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha224.der rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha224.pem: rsa_pkcs1_1024_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA224 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha224.pem keys_rsa_enc_pkcs8_v2_1024_3des_sha224: rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha224.der rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha224.pem rsa_pkcs8_pbes2_pbkdf2_1024_des_sha224.der: rsa_pkcs1_1024_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA224 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des_sha224.der rsa_pkcs8_pbes2_pbkdf2_1024_des_sha224.pem: rsa_pkcs1_1024_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA224 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des_sha224.pem keys_rsa_enc_pkcs8_v2_1024_des_sha224: rsa_pkcs8_pbes2_pbkdf2_1024_des_sha224.der rsa_pkcs8_pbes2_pbkdf2_1024_des_sha224.pem keys_rsa_enc_pkcs8_v2_1024_sha224: keys_rsa_enc_pkcs8_v2_1024_3des_sha224 keys_rsa_enc_pkcs8_v2_1024_des_sha224 ### 2048-bit rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha224.der: rsa_pkcs1_2048_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA224 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha224.der rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha224.pem: rsa_pkcs1_2048_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA224 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha224.pem keys_rsa_enc_pkcs8_v2_2048_3des_sha224: rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha224.der rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha224.pem rsa_pkcs8_pbes2_pbkdf2_2048_des_sha224.der: rsa_pkcs1_2048_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA224 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des_sha224.der rsa_pkcs8_pbes2_pbkdf2_2048_des_sha224.pem: rsa_pkcs1_2048_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA224 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des_sha224.pem keys_rsa_enc_pkcs8_v2_2048_des_sha224: rsa_pkcs8_pbes2_pbkdf2_2048_des_sha224.der rsa_pkcs8_pbes2_pbkdf2_2048_des_sha224.pem keys_rsa_enc_pkcs8_v2_2048_sha224: keys_rsa_enc_pkcs8_v2_2048_3des_sha224 keys_rsa_enc_pkcs8_v2_2048_des_sha224 ### 4096-bit rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.der: rsa_pkcs1_4096_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA224 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.der rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.pem: rsa_pkcs1_4096_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA224 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.pem keys_rsa_enc_pkcs8_v2_4096_3des_sha224: rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.der rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha224.pem rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.der: rsa_pkcs1_4096_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA224 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.der rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.pem: rsa_pkcs1_4096_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA224 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.pem keys_rsa_enc_pkcs8_v2_4096_des_sha224: rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.der rsa_pkcs8_pbes2_pbkdf2_4096_des_sha224.pem keys_rsa_enc_pkcs8_v2_4096_sha224: keys_rsa_enc_pkcs8_v2_4096_3des_sha224 keys_rsa_enc_pkcs8_v2_4096_des_sha224 ### ### PKCS8-v2 encoded, encrypted RSA keys, PRF hmacWithSHA256 ### ### 1024-bit rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha256.der: rsa_pkcs1_1024_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA256 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha256.der rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha256.pem: rsa_pkcs1_1024_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA256 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha256.pem keys_rsa_enc_pkcs8_v2_1024_3des_sha256: rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha256.der rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha256.pem rsa_pkcs8_pbes2_pbkdf2_1024_des_sha256.der: rsa_pkcs1_1024_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA256 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des_sha256.der rsa_pkcs8_pbes2_pbkdf2_1024_des_sha256.pem: rsa_pkcs1_1024_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA256 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des_sha256.pem keys_rsa_enc_pkcs8_v2_1024_des_sha256: rsa_pkcs8_pbes2_pbkdf2_1024_des_sha256.der rsa_pkcs8_pbes2_pbkdf2_1024_des_sha256.pem keys_rsa_enc_pkcs8_v2_1024_sha256: keys_rsa_enc_pkcs8_v2_1024_3des_sha256 keys_rsa_enc_pkcs8_v2_1024_des_sha256 ### 2048-bit rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha256.der: rsa_pkcs1_2048_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA256 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha256.der rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha256.pem: rsa_pkcs1_2048_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA256 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha256.pem keys_rsa_enc_pkcs8_v2_2048_3des_sha256: rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha256.der rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha256.pem rsa_pkcs8_pbes2_pbkdf2_2048_des_sha256.der: rsa_pkcs1_2048_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA256 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des_sha256.der rsa_pkcs8_pbes2_pbkdf2_2048_des_sha256.pem: rsa_pkcs1_2048_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA256 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des_sha256.pem keys_rsa_enc_pkcs8_v2_2048_des_sha256: rsa_pkcs8_pbes2_pbkdf2_2048_des_sha256.der rsa_pkcs8_pbes2_pbkdf2_2048_des_sha256.pem keys_rsa_enc_pkcs8_v2_2048_sha256: keys_rsa_enc_pkcs8_v2_2048_3des_sha256 keys_rsa_enc_pkcs8_v2_2048_des_sha256 ### 4096-bit rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.der: rsa_pkcs1_4096_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA256 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.der rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.pem: rsa_pkcs1_4096_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA256 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.pem keys_rsa_enc_pkcs8_v2_4096_3des_sha256: rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.der rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha256.pem rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.der: rsa_pkcs1_4096_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA256 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.der rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.pem: rsa_pkcs1_4096_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA256 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.pem keys_rsa_enc_pkcs8_v2_4096_des_sha256: rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.der rsa_pkcs8_pbes2_pbkdf2_4096_des_sha256.pem keys_rsa_enc_pkcs8_v2_4096_sha256: keys_rsa_enc_pkcs8_v2_4096_3des_sha256 keys_rsa_enc_pkcs8_v2_4096_des_sha256 ### ### PKCS8-v2 encoded, encrypted RSA keys, PRF hmacWithSHA384 ### ### 1024-bit rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha384.der: rsa_pkcs1_1024_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA384 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha384.der rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha384.pem: rsa_pkcs1_1024_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA384 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha384.pem keys_rsa_enc_pkcs8_v2_1024_3des_sha384: rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha384.der rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha384.pem rsa_pkcs8_pbes2_pbkdf2_1024_des_sha384.der: rsa_pkcs1_1024_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA384 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des_sha384.der rsa_pkcs8_pbes2_pbkdf2_1024_des_sha384.pem: rsa_pkcs1_1024_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA384 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des_sha384.pem keys_rsa_enc_pkcs8_v2_1024_des_sha384: rsa_pkcs8_pbes2_pbkdf2_1024_des_sha384.der rsa_pkcs8_pbes2_pbkdf2_1024_des_sha384.pem keys_rsa_enc_pkcs8_v2_1024_sha384: keys_rsa_enc_pkcs8_v2_1024_3des_sha384 keys_rsa_enc_pkcs8_v2_1024_des_sha384 ### 2048-bit rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha384.der: rsa_pkcs1_2048_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA384 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha384.der rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha384.pem: rsa_pkcs1_2048_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA384 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha384.pem keys_rsa_enc_pkcs8_v2_2048_3des_sha384: rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha384.der rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha384.pem rsa_pkcs8_pbes2_pbkdf2_2048_des_sha384.der: rsa_pkcs1_2048_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA384 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des_sha384.der rsa_pkcs8_pbes2_pbkdf2_2048_des_sha384.pem: rsa_pkcs1_2048_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA384 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des_sha384.pem keys_rsa_enc_pkcs8_v2_2048_des_sha384: rsa_pkcs8_pbes2_pbkdf2_2048_des_sha384.der rsa_pkcs8_pbes2_pbkdf2_2048_des_sha384.pem keys_rsa_enc_pkcs8_v2_2048_sha384: keys_rsa_enc_pkcs8_v2_2048_3des_sha384 keys_rsa_enc_pkcs8_v2_2048_des_sha384 ### 4096-bit rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.der: rsa_pkcs1_4096_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA384 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.der rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.pem: rsa_pkcs1_4096_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA384 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.pem keys_rsa_enc_pkcs8_v2_4096_3des_sha384: rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.der rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha384.pem rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.der: rsa_pkcs1_4096_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA384 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.der rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.pem: rsa_pkcs1_4096_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA384 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.pem keys_rsa_enc_pkcs8_v2_4096_des_sha384: rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.der rsa_pkcs8_pbes2_pbkdf2_4096_des_sha384.pem keys_rsa_enc_pkcs8_v2_4096_sha384: keys_rsa_enc_pkcs8_v2_4096_3des_sha384 keys_rsa_enc_pkcs8_v2_4096_des_sha384 ### ### PKCS8-v2 encoded, encrypted RSA keys, PRF hmacWithSHA512 ### ### 1024-bit rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha512.der: rsa_pkcs1_1024_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA512 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha512.der rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha512.pem: rsa_pkcs1_1024_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA512 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha512.pem keys_rsa_enc_pkcs8_v2_1024_3des_sha512: rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha512.der rsa_pkcs8_pbes2_pbkdf2_1024_3des_sha512.pem rsa_pkcs8_pbes2_pbkdf2_1024_des_sha512.der: rsa_pkcs1_1024_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA512 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des_sha512.der rsa_pkcs8_pbes2_pbkdf2_1024_des_sha512.pem: rsa_pkcs1_1024_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA512 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_1024_des_sha512.pem keys_rsa_enc_pkcs8_v2_1024_des_sha512: rsa_pkcs8_pbes2_pbkdf2_1024_des_sha512.der rsa_pkcs8_pbes2_pbkdf2_1024_des_sha512.pem keys_rsa_enc_pkcs8_v2_1024_sha512: keys_rsa_enc_pkcs8_v2_1024_3des_sha512 keys_rsa_enc_pkcs8_v2_1024_des_sha512 ### 2048-bit rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha512.der: rsa_pkcs1_2048_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA512 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha512.der rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha512.pem: rsa_pkcs1_2048_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA512 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha512.pem keys_rsa_enc_pkcs8_v2_2048_3des_sha512: rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha512.der rsa_pkcs8_pbes2_pbkdf2_2048_3des_sha512.pem rsa_pkcs8_pbes2_pbkdf2_2048_des_sha512.der: rsa_pkcs1_2048_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA512 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des_sha512.der rsa_pkcs8_pbes2_pbkdf2_2048_des_sha512.pem: rsa_pkcs1_2048_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA512 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_2048_des_sha512.pem keys_rsa_enc_pkcs8_v2_2048_des_sha512: rsa_pkcs8_pbes2_pbkdf2_2048_des_sha512.der rsa_pkcs8_pbes2_pbkdf2_2048_des_sha512.pem keys_rsa_enc_pkcs8_v2_2048_sha512: keys_rsa_enc_pkcs8_v2_2048_3des_sha512 keys_rsa_enc_pkcs8_v2_2048_des_sha512 ### 4096-bit rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.der: rsa_pkcs1_4096_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA512 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.der rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.pem: rsa_pkcs1_4096_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des3 -v2prf hmacWithSHA512 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.pem keys_rsa_enc_pkcs8_v2_4096_3des_sha512: rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.der rsa_pkcs8_pbes2_pbkdf2_4096_3des_sha512.pem rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.der: rsa_pkcs1_4096_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA512 -inform PEM -in $< -outform DER -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.der rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.pem: rsa_pkcs1_4096_clear.pem $(OPENSSL) pkcs8 -topk8 -v2 des -v2prf hmacWithSHA512 -inform PEM -in $< -outform PEM -out $@ -passout "pass:$(keys_rsa_pkcs8_pwd)" all_final += rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.pem keys_rsa_enc_pkcs8_v2_4096_des_sha512: rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.der rsa_pkcs8_pbes2_pbkdf2_4096_des_sha512.pem keys_rsa_enc_pkcs8_v2_4096_sha512: keys_rsa_enc_pkcs8_v2_4096_3des_sha512 keys_rsa_enc_pkcs8_v2_4096_des_sha512 ### ### Rules to generate all RSA keys from a particular class ### ### Generate basic unencrypted RSA keys keys_rsa_unenc: rsa_pkcs1_1024_clear.pem rsa_pkcs1_2048_clear.pem rsa_pkcs1_4096_clear.pem ### Generate PKCS1-encoded encrypted RSA keys keys_rsa_enc_basic: keys_rsa_enc_basic_1024 keys_rsa_enc_basic_2048 keys_rsa_enc_basic_4096 ### Generate PKCS8-v1 encrypted RSA keys keys_rsa_enc_pkcs8_v1: keys_rsa_enc_pkcs8_v1_1024 keys_rsa_enc_pkcs8_v1_2048 keys_rsa_enc_pkcs8_v1_4096 ### Generate PKCS8-v2 encrypted RSA keys keys_rsa_enc_pkcs8_v2: keys_rsa_enc_pkcs8_v2_1024 keys_rsa_enc_pkcs8_v2_2048 keys_rsa_enc_pkcs8_v2_4096 keys_rsa_enc_pkcs8_v2_1024_sha224 keys_rsa_enc_pkcs8_v2_2048_sha224 keys_rsa_enc_pkcs8_v2_4096_sha224 keys_rsa_enc_pkcs8_v2_1024_sha256 keys_rsa_enc_pkcs8_v2_2048_sha256 keys_rsa_enc_pkcs8_v2_4096_sha256 keys_rsa_enc_pkcs8_v2_1024_sha384 keys_rsa_enc_pkcs8_v2_2048_sha384 keys_rsa_enc_pkcs8_v2_4096_sha384 keys_rsa_enc_pkcs8_v2_1024_sha512 keys_rsa_enc_pkcs8_v2_2048_sha512 keys_rsa_enc_pkcs8_v2_4096_sha512 ### Generate all RSA keys keys_rsa_all: keys_rsa_unenc keys_rsa_enc_basic keys_rsa_enc_pkcs8_v1 keys_rsa_enc_pkcs8_v2 ################################################################ #### Generate various EC keys ################################################################ ### ### PKCS8 encoded ### ec_prv.pk8.der: $(OPENSSL) genpkey -algorithm EC -pkeyopt ec_paramgen_curve:prime192v1 -pkeyopt ec_param_enc:named_curve -out $@ -outform DER all_final += ec_prv.pk8.der # ### Instructions for creating `ec_prv.pk8nopub.der`, # ### `ec_prv.pk8nopubparam.der`, and `ec_prv.pk8param.der` by hand from # ### `ec_prv.pk8.der`. # # These instructions assume you are familiar with ASN.1 DER encoding and can # use a hex editor to manipulate DER. # # The relevant ASN.1 definitions for a PKCS#8 encoded Elliptic Curve key are: # # PrivateKeyInfo ::= SEQUENCE { # version Version, # privateKeyAlgorithm PrivateKeyAlgorithmIdentifier, # privateKey PrivateKey, # attributes [0] IMPLICIT Attributes OPTIONAL # } # # AlgorithmIdentifier ::= SEQUENCE { # algorithm OBJECT IDENTIFIER, # parameters ANY DEFINED BY algorithm OPTIONAL # } # # ECParameters ::= CHOICE { # namedCurve OBJECT IDENTIFIER # -- implicitCurve NULL # -- specifiedCurve SpecifiedECDomain # } # # ECPrivateKey ::= SEQUENCE { # version INTEGER { ecPrivkeyVer1(1) } (ecPrivkeyVer1), # privateKey OCTET STRING, # parameters [0] ECParameters {{ NamedCurve }} OPTIONAL, # publicKey [1] BIT STRING OPTIONAL # } # # `ec_prv.pk8.der` as generatde above by OpenSSL should have the following # fields: # # * privateKeyAlgorithm namedCurve # * privateKey.parameters NOT PRESENT # * privateKey.publicKey PRESENT # * attributes NOT PRESENT # # # ec_prv.pk8nopub.der # # Take `ec_prv.pk8.der` and remove `privateKey.publicKey`. # # # ec_prv.pk8nopubparam.der # # Take `ec_prv.pk8nopub.der` and add `privateKey.parameters`, the same value as # `privateKeyAlgorithm.namedCurve`. Don't forget to add the explicit tag. # # # ec_prv.pk8param.der # # Take `ec_prv.pk8.der` and add `privateKey.parameters`, the same value as # `privateKeyAlgorithm.namedCurve`. Don't forget to add the explicit tag. ec_prv.pk8.pem: ec_prv.pk8.der $(OPENSSL) pkey -in $< -inform DER -out $@ all_final += ec_prv.pk8.pem ec_prv.pk8nopub.pem: ec_prv.pk8nopub.der $(OPENSSL) pkey -in $< -inform DER -out $@ all_final += ec_prv.pk8nopub.pem ec_prv.pk8nopubparam.pem: ec_prv.pk8nopubparam.der $(OPENSSL) pkey -in $< -inform DER -out $@ all_final += ec_prv.pk8nopubparam.pem ec_prv.pk8param.pem: ec_prv.pk8param.der $(OPENSSL) pkey -in $< -inform DER -out $@ all_final += ec_prv.pk8param.pem ec_pub.pem: ec_prv.sec1.der $(OPENSSL) pkey -in $< -inform DER -outform PEM -pubout -out $@ all_final += ec_pub.pem ec_prv.sec1.comp.pem: ec_prv.sec1.pem $(OPENSSL) ec -in $< -out $@ -conv_form compressed all_final += ec_prv.sec1.comp.pem ec_224_prv.comp.pem: ec_224_prv.pem $(OPENSSL) ec -in $< -out $@ -conv_form compressed all_final += ec_224_prv.comp.pem ec_256_prv.comp.pem: ec_256_prv.pem $(OPENSSL) ec -in $< -out $@ -conv_form compressed all_final += ec_256_prv.comp.pem ec_384_prv.comp.pem: ec_384_prv.pem $(OPENSSL) ec -in $< -out $@ -conv_form compressed all_final += ec_384_prv.comp.pem ec_521_prv.comp.pem: ec_521_prv.pem $(OPENSSL) ec -in $< -out $@ -conv_form compressed all_final += ec_521_prv.comp.pem ec_bp256_prv.comp.pem: ec_bp256_prv.pem $(OPENSSL) ec -in $< -out $@ -conv_form compressed all_final += ec_bp256_prv.comp.pem ec_bp384_prv.comp.pem: ec_bp384_prv.pem $(OPENSSL) ec -in $< -out $@ -conv_form compressed all_final += ec_bp384_prv.comp.pem ec_bp512_prv.comp.pem: ec_bp512_prv.pem $(OPENSSL) ec -in $< -out $@ -conv_form compressed all_final += ec_bp512_prv.comp.pem ec_pub.comp.pem: ec_pub.pem $(OPENSSL) ec -pubin -in $< -out $@ -conv_form compressed all_final += ec_pub.comp.pem ec_224_pub.comp.pem: ec_224_pub.pem $(OPENSSL) ec -pubin -in $< -out $@ -conv_form compressed all_final += ec_224_pub.comp.pem ec_256_pub.comp.pem: ec_256_pub.pem $(OPENSSL) ec -pubin -in $< -out $@ -conv_form compressed all_final += ec_256_pub.comp.pem ec_384_pub.comp.pem: ec_384_pub.pem $(OPENSSL) ec -pubin -in $< -out $@ -conv_form compressed all_final += ec_384_pub.comp.pem ec_521_pub.comp.pem: ec_521_pub.pem $(OPENSSL) ec -pubin -in $< -out $@ -conv_form compressed all_final += ec_521_pub.comp.pem ec_bp256_pub.comp.pem: ec_bp256_pub.pem $(OPENSSL) ec -pubin -in $< -out $@ -conv_form compressed all_final += ec_bp256_pub.comp.pem ec_bp384_pub.comp.pem: ec_bp384_pub.pem $(OPENSSL) ec -pubin -in $< -out $@ -conv_form compressed all_final += ec_bp384_pub.comp.pem ec_bp512_pub.comp.pem: ec_bp512_pub.pem $(OPENSSL) ec -pubin -in $< -out $@ -conv_form compressed all_final += ec_bp512_pub.comp.pem ec_x25519_prv.der: $(OPENSSL) genpkey -algorithm X25519 -out $@ -outform DER all_final += ec_x25519_prv.der ec_x25519_pub.der: ec_x25519_prv.der $(OPENSSL) pkey -in $< -inform DER -out $@ -outform DER -pubout all_final += ec_x25519_pub.der ec_x25519_prv.pem: ec_x25519_prv.der $(OPENSSL) pkey -in $< -inform DER -out $@ all_final += ec_x25519_prv.pem ec_x25519_pub.pem: ec_x25519_prv.der $(OPENSSL) pkey -in $< -inform DER -out $@ -pubout all_final += ec_x25519_pub.pem ec_x448_prv.der: $(OPENSSL) genpkey -algorithm X448 -out $@ -outform DER all_final += ec_x448_prv.der ec_x448_pub.der: ec_x448_prv.der $(OPENSSL) pkey -in $< -inform DER -out $@ -outform DER -pubout all_final += ec_x448_pub.der ec_x448_prv.pem: ec_x448_prv.der $(OPENSSL) pkey -in $< -inform DER -out $@ all_final += ec_x448_prv.pem ec_x448_pub.pem: ec_x448_prv.der $(OPENSSL) pkey -in $< -inform DER -out $@ -pubout all_final += ec_x448_pub.pem ################################################################ #### Convert PEM keys to DER format ################################################################ server1.pubkey.der: server1.pubkey $(OPENSSL) pkey -pubin -in $< -out $@ -outform DER all_final += server1.pubkey.der rsa4096_pub.der: rsa4096_pub.pem $(OPENSSL) pkey -pubin -in $< -out $@ -outform DER all_final += rsa4096_pub.der ec_pub.der: ec_pub.pem $(OPENSSL) pkey -pubin -in $< -out $@ -outform DER all_final += ec_pub.der ec_521_pub.der: ec_521_pub.pem $(OPENSSL) pkey -pubin -in $< -out $@ -outform DER all_final += ec_521_pub.der ec_bp512_pub.der: ec_bp512_pub.pem $(OPENSSL) pkey -pubin -in $< -out $@ -outform DER all_final += ec_bp512_pub.der server1.key.der: server1.key $(OPENSSL) pkey -in $< -out $@ -outform DER all_final += server1.key.der rsa4096_prv.der: rsa4096_prv.pem $(OPENSSL) pkey -in $< -out $@ -outform DER all_final += rsa4096_prv.der ec_prv.sec1.der: ec_prv.sec1.pem $(OPENSSL) pkey -in $< -out $@ -outform DER all_final += ec_prv.sec1.der ec_256_long_prv.der: ec_256_long_prv.pem $(OPENSSL) pkey -in $< -out $@ -outform DER all_final += ec_256_long_prv.der ec_521_prv.der: ec_521_prv.pem $(OPENSSL) pkey -in $< -out $@ -outform DER all_final += ec_521_prv.der ec_521_short_prv.der: ec_521_short_prv.pem $(OPENSSL) pkey -in $< -out $@ -outform DER all_final += ec_521_short_prv.der ec_bp512_prv.der: ec_bp512_prv.pem $(OPENSSL) pkey -in $< -out $@ -outform DER all_final += ec_bp512_prv.der ################################################################ ### Generate CSRs for X.509 write test suite ################################################################ parse_input/server1.req.sha1 server1.req.sha1: server1.key $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA1 all_final += server1.req.sha1 parse_input/server1.req.md5 server1.req.md5: server1.key $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=MD5 all_final += server1.req.md5 parse_input/server1.req.sha224 server1.req.sha224: server1.key $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA224 all_final += server1.req.sha224 parse_input/server1.req.sha256 server1.req.sha256: server1.key $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA256 all_final += server1.req.sha256 server1.req.sha256.ext: server1.key # Generating this with OpenSSL as a comparison point to test we're getting the same result openssl req -new -out $@ -key $< -subj '/C=NL/O=PolarSSL/CN=PolarSSL Server 1' -sha256 -config server1.req.sha256.conf parse_input/server1.req.sha384 server1.req.sha384: server1.key $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA384 all_final += server1.req.sha384 parse_input/server1.req.sha512 server1.req.sha512: server1.key $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA512 all_final += server1.req.sha512 server1.req.cert_type: server1.key $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< ns_cert_type=ssl_server subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA1 all_final += server1.req.cert_type server1.req.key_usage: server1.key $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< key_usage=digital_signature,non_repudiation,key_encipherment subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA1 all_final += server1.req.key_usage server1.req.ku-ct: server1.key $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< key_usage=digital_signature,non_repudiation,key_encipherment ns_cert_type=ssl_server subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA1 all_final += server1.req.ku-ct server1.req.key_usage_empty: server1.key $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA1 force_key_usage=1 all_final += server1.req.key_usage_empty server1.req.cert_type_empty: server1.key $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Server 1" md=SHA1 force_ns_cert_type=1 all_final += server1.req.cert_type_empty parse_input/server1.req.commas.sha256: server1.key $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL\, Commas,CN=PolarSSL Server 1" md=SHA256 parse_input/server1.req.hashsymbol.sha256: server1.key $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=\#PolarSSL,CN=PolarSSL Server 1" md=SHA256 parse_input/server1.req.spaces.sha256: server1.key $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O= PolarSSL ,CN=PolarSSL Server 1" md=SHA256 parse_input/server1.req.asciichars.sha256: server1.key $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=极地SSL,CN=PolarSSL Server 1" md=SHA256 # server2* server2_pwd_ec = PolarSSLTest server2.req.sha256: server2.key $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=localhost" md=SHA256 all_intermediate += server2.req.sha256 parse_input/server2.crt.der: parse_input/server2.crt server2.crt.der: server2.crt parse_input/server2.crt.der server2.crt.der: $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ all_final += server2.crt.der server2-sha256.crt.der: server2-sha256.crt $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ all_final += server2-sha256.crt.der server2.key.der: server2.key $(OPENSSL) pkey -in $< -out $@ -inform PEM -outform DER all_final += server2.key.der server2.key.enc: server2.key $(OPENSSL) rsa -aes256 -in $< -out $@ -passout "pass:$(server2_pwd_ec)" all_final += server2.key.enc # server5* server5.csr: server5.key $(OPENSSL) req -new -subj "/C=NL/O=PolarSSL/CN=localhost" \ -key $< -out $@ all_intermediate += server5.csr parse_input/server5.crt server5.crt: server5-sha256.crt cp $< $@ all_intermediate += server5-sha256.crt server5-sha%.crt: server5.csr $(test_ca_crt_file_ec) $(test_ca_key_file_ec) server5.crt.openssl.v3_ext $(OPENSSL) x509 -req -CA $(test_ca_crt_file_ec) -CAkey $(test_ca_key_file_ec) \ -extfile server5.crt.openssl.v3_ext -set_serial 9 -days 3650 \ -sha$(@F:server5-sha%.crt=%) -in $< -out $@ all_final += server5.crt server5-sha1.crt server5-sha224.crt server5-sha384.crt server5-sha512.crt server5-badsign.crt: server5.crt { head -n-2 $<; tail -n-2 $< | sed -e '1s/0\(=*\)$$/_\1/' -e '1s/[^_=]\(=*\)$$/0\1/' -e '1s/_/1/'; } > $@ all_final += server5-badsign.crt # The use of 'Server 1' in the DN is intentional here, as the DN is hardcoded in the x509_write test suite.' server5.req.ku.sha1: server5.key $(OPENSSL) req -key $< -out $@ -new -nodes -subj "/C=NL/O=PolarSSL/CN=PolarSSL Server 1" -sha1 -addext keyUsage=digitalSignature,nonRepudiation all_final += server5.req.ku.sha1 server5.ku-ds.crt: SERVER5_CRT_SERIAL=45 server5.ku-ds.crt: SERVER5_KEY_USAGE=digital_signature server5.ku-ka.crt: SERVER5_CRT_SERIAL=46 server5.ku-ka.crt: SERVER5_KEY_USAGE=key_agreement server5.ku-ke.crt: SERVER5_CRT_SERIAL=47 server5.ku-ke.crt: SERVER5_KEY_USAGE=key_encipherment server5.eku-cs.crt: SERVER5_CRT_SERIAL=58 server5.eku-cs.crt: SERVER5_EXT_KEY_USAGE=codeSigning server5.eku-cs_any.crt: SERVER5_CRT_SERIAL=59 server5.eku-cs_any.crt: SERVER5_EXT_KEY_USAGE=codeSigning,any server5.eku-cli.crt: SERVER5_CRT_SERIAL=60 server5.eku-cli.crt: SERVER5_EXT_KEY_USAGE=clientAuth server5.eku-srv_cli.crt: SERVER5_CRT_SERIAL=61 server5.eku-srv_cli.crt: SERVER5_EXT_KEY_USAGE=serverAuth,clientAuth server5.eku-srv.crt: SERVER5_CRT_SERIAL=62 server5.eku-srv.crt: SERVER5_EXT_KEY_USAGE=serverAuth server5.ku-%.crt: SERVER5_EXT_OPTS=key_usage=$(SERVER5_KEY_USAGE) server5.eku-%.crt: SERVER5_EXT_OPTS=ext_key_usage=$(SERVER5_EXT_KEY_USAGE) server5.%.crt: server5.key $(MBEDTLS_CERT_WRITE) \ subject_key=$< subject_name="C=NL,O=PolarSSL,CN=localhost" serial=$(SERVER5_CRT_SERIAL) \ issuer_crt=$(test_ca_crt_file_ec) issuer_key=$(test_ca_key_file_ec) $(SERVER5_EXT_OPTS) \ not_before=20190210144406 not_after=20290210144406 md=SHA256 version=3 output_file=$@ all_final += server5.ku-ka.crt server5.ku-ke.crt server5.ku-ds.crt all_final += server5.eku-cs.crt server5.eku-cs_any.crt server5.eku-cli.crt server5.eku-srv_cli.crt server5.eku-srv.crt # server6* server6.csr: server6.key $(OPENSSL) req -new -subj "/C=NL/O=PolarSSL/CN=localhost" \ -key $< -out $@ all_intermediate += server6.csr server6.crt: server6.csr $(test_ca_crt_file_ec) $(test_ca_key_file_ec) $(OPENSSL) x509 -req -CA $(test_ca_crt_file_ec) -CAkey $(test_ca_key_file_ec) \ -extfile server5.crt.openssl.v3_ext -set_serial 10 -days 3650 -sha256 -in $< -out $@ all_final += server6.crt server6-ss-child.csr : server6.key $(OPENSSL) req -new -subj "/CN=selfsigned-child/OU=testing/O=PolarSSL/C=NL" \ -key $< -out $@ all_intermediate += server6-ss-child.csr server6-ss-child.crt: server6-ss-child.csr server5-selfsigned.crt server5.key server6-ss-child.crt.openssl.v3_ext $(OPENSSL) x509 -req -CA server5-selfsigned.crt -CAkey server5.key \ -extfile server6-ss-child.crt.openssl.v3_ext \ -set_serial 0x53a2cb5822399474a7ec79ec \ -days 3650 -sha256 -in $< -out $@ all_final += server6-ss-child.crt ################################################################ ### Generate certificates for CRT write check tests ################################################################ ### The test files use the Mbed TLS generated certificates server1*.crt, ### but for comparison with OpenSSL also rules for OpenSSL-generated ### certificates server1*.crt.openssl are offered. ### ### Known differences: ### * OpenSSL encodes trailing zero-bits in bit-strings occurring in X.509 extension ### as unused bits, while Mbed TLS doesn't. test_ca_server1_db = test-ca.server1.db test_ca_server1_serial = test-ca.server1.serial test_ca_server1_config_file = test-ca.server1.opensslconf # server1* parse_input/server1.crt: parse_input/server1.req.sha256 server1.crt: server1.req.sha256 parse_input/server1.crt server1.crt: $(test_ca_crt) $(test_ca_key_file_rsa) parse_input/server1.crt server1.crt: $(MBEDTLS_CERT_WRITE) request_file=$(@D)/server1.req.sha256 \ issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) \ issuer_pwd=$(test_ca_pwd_rsa) version=1 \ not_before=20190210144406 not_after=20290210144406 \ md=SHA1 version=3 output_file=$@ server1.allSubjectAltNames.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) $(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 version=3 output_file=$@ san=URI:http://pki.example.com\;IP:1.2.3.4\;DN:C=UK,O="Mbed TLS",CN="SubjectAltName test"\;DNS:example.com\;RFC822:mail@example.com server1.long_serial.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) echo "112233445566778899aabbccddeeff0011223344" > test-ca.server1.tmp.serial $(OPENSSL) ca -in server1.req.sha256 -key PolarSSLTest -config test-ca.server1.test_serial.opensslconf -notext -batch -out $@ server1.80serial.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) echo "8011223344" > test-ca.server1.tmp.serial $(OPENSSL) ca -in server1.req.sha256 -key PolarSSLTest -config test-ca.server1.test_serial.opensslconf -notext -batch -out $@ server1.long_serial_FF.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) echo "ffffffffffffffffffffffffffffffff" > test-ca.server1.tmp.serial $(OPENSSL) ca -in server1.req.sha256 -key PolarSSLTest -config test-ca.server1.test_serial.opensslconf -notext -batch -out $@ server1.noauthid.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) $(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA1 authority_identifier=0 version=3 output_file=$@ parse_input/server1.crt.der: parse_input/server1.crt $(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 \ issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) \ issuer_pwd=$(test_ca_pwd_rsa) \ not_before=20190210144406 not_after=20290210144406 \ md=SHA1 authority_identifier=0 version=3 output_file=$@ server1.der: server1.crt $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ server1.commas.crt: server1.key parse_input/server1.req.commas.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) $(MBEDTLS_CERT_WRITE) request_file=parse_input/server1.req.commas.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 version=3 output_file=$@ server1.hashsymbol.crt: server1.key parse_input/server1.req.hashsymbol.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) $(MBEDTLS_CERT_WRITE) request_file=parse_input/server1.req.hashsymbol.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 version=3 output_file=$@ server1.spaces.crt: server1.key parse_input/server1.req.spaces.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) $(MBEDTLS_CERT_WRITE) request_file=parse_input/server1.req.spaces.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 version=3 output_file=$@ server1.asciichars.crt: server1.key parse_input/server1.req.asciichars.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) $(MBEDTLS_CERT_WRITE) request_file=parse_input/server1.req.asciichars.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 version=3 output_file=$@ all_final += server1.crt server1.noauthid.crt parse_input/server1.crt.der server1.commas.crt server1.hashsymbol.crt server1.spaces.crt server1.asciichars.crt parse_input/server1.key_usage.crt: parse_input/server1.req.sha256 server1.key_usage.crt: server1.req.sha256 parse_input/server1.key_usage.crt server1.key_usage.crt: $(test_ca_crt) $(test_ca_key_file_rsa) parse_input/server1.key_usage.crt server1.key_usage.crt: $(MBEDTLS_CERT_WRITE) request_file=$(@D)/server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 key_usage=digital_signature,non_repudiation,key_encipherment version=3 output_file=$@ server1.key_usage_noauthid.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) $(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 key_usage=digital_signature,non_repudiation,key_encipherment authority_identifier=0 version=3 output_file=$@ server1.key_usage.der: server1.key_usage.crt $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ all_final += server1.key_usage.crt server1.key_usage_noauthid.crt server1.key_usage.der parse_input/server1.cert_type.crt: parse_input/server1.req.sha256 server1.cert_type.crt: server1.req.sha256 parse_input/server1.cert_type.crt server1.cert_type.crt: $(test_ca_crt) $(test_ca_key_file_rsa) parse_input/server1.cert_type.crt server1.cert_type.crt: $(MBEDTLS_CERT_WRITE) request_file=$(@D)/server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 ns_cert_type=ssl_server version=3 output_file=$@ server1.cert_type_noauthid.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) $(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 ns_cert_type=ssl_server authority_identifier=0 version=3 output_file=$@ server1.cert_type.der: server1.cert_type.crt $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ all_final += server1.cert_type.crt server1.cert_type_noauthid.crt server1.cert_type.der server1.v1.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) $(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 version=1 output_file=$@ server1.v1.der: server1.v1.crt $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ all_final += server1.v1.crt server1.v1.der server1.ca.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) $(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) version=1 not_before=20190210144406 not_after=20290210144406 md=SHA1 is_ca=1 version=3 output_file=$@ server1.ca_noauthid.crt: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) $(MBEDTLS_CERT_WRITE) request_file=server1.req.sha256 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA1 authority_identifier=0 is_ca=1 version=3 output_file=$@ server1.ca.der: server1.ca.crt $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ all_final += server1.ca.crt server1.ca_noauthid.crt server1.ca.der server1-nospace.crt: server1.key test-ca.crt $(MBEDTLS_CERT_WRITE) subject_key=$< serial=31\ subject_name="C=NL,O=PolarSSL,CN=polarssl.example" \ issuer_crt=test-ca.crt issuer_key=$(test_ca_key_file_rsa) \ issuer_pwd=$(test_ca_pwd_rsa) \ not_before=20190210144406 not_after=20290210144406 \ md=SHA256 version=3 authority_identifier=1 \ output_file=$@ all_final += server1-nospace.crt server1_ca.crt: server1.crt $(test_ca_crt) cat server1.crt $(test_ca_crt) > $@ all_final += server1_ca.crt parse_input/cert_sha1.crt cert_sha1.crt: server1.key $(MBEDTLS_CERT_WRITE) subject_key=server1.key subject_name="C=NL, O=PolarSSL, CN=PolarSSL Cert SHA1" serial=7 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA1 version=3 output_file=$@ all_final += cert_sha1.crt parse_input/cert_sha224.crt cert_sha224.crt: server1.key $(MBEDTLS_CERT_WRITE) subject_key=server1.key subject_name="C=NL, O=PolarSSL, CN=PolarSSL Cert SHA224" serial=8 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA224 version=3 output_file=$@ all_final += cert_sha224.crt parse_input/cert_sha256.crt cert_sha256.crt: server1.key $(MBEDTLS_CERT_WRITE) subject_key=server1.key subject_name="C=NL, O=PolarSSL, CN=PolarSSL Cert SHA256" serial=9 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA256 version=3 output_file=$@ all_final += cert_sha256.crt parse_input/cert_sha384.crt cert_sha384.crt: server1.key $(MBEDTLS_CERT_WRITE) subject_key=server1.key subject_name="C=NL, O=PolarSSL, CN=PolarSSL Cert SHA384" serial=10 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA384 version=3 output_file=$@ all_final += cert_sha384.crt parse_input/cert_sha512.crt cert_sha512.crt: server1.key $(MBEDTLS_CERT_WRITE) subject_key=server1.key subject_name="C=NL, O=PolarSSL, CN=PolarSSL Cert SHA512" serial=11 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA512 version=3 output_file=$@ all_final += cert_sha512.crt cert_example_wildcard.crt: server1.key $(MBEDTLS_CERT_WRITE) subject_key=server1.key subject_name="C=NL, O=PolarSSL, CN=*.example.com" serial=12 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA1 version=3 output_file=$@ all_final += cert_example_wildcard.crt # OpenSSL-generated certificates for comparison # Also provide certificates in DER format to allow # direct binary comparison using e.g. dumpasn1 server1.crt.openssl server1.key_usage.crt.openssl server1.cert_type.crt.openssl: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) $(test_ca_server1_config_file) echo "01" > $(test_ca_server1_serial) rm -f $(test_ca_server1_db) touch $(test_ca_server1_db) $(OPENSSL) ca -batch -passin "pass:$(test_ca_pwd_rsa)" -config $(test_ca_server1_config_file) -in server1.req.sha256 -extensions v3_ext -extfile $@.v3_ext -out $@ server1.der.openssl: server1.crt.openssl $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ server1.key_usage.der.openssl: server1.key_usage.crt.openssl $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ server1.cert_type.der.openssl: server1.cert_type.crt.openssl $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ server1.v1.crt.openssl: server1.key server1.req.sha256 $(test_ca_crt) $(test_ca_key_file_rsa) $(test_ca_server1_config_file) echo "01" > $(test_ca_server1_serial) rm -f $(test_ca_server1_db) touch $(test_ca_server1_db) $(OPENSSL) ca -batch -passin "pass:$(test_ca_pwd_rsa)" -config $(test_ca_server1_config_file) -in server1.req.sha256 -out $@ server1.v1.der.openssl: server1.v1.crt.openssl $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ # To revoke certificate in the openssl database: # # $(OPENSSL) ca -gencrl -batch -cert $(test_ca_crt) -keyfile $(test_ca_key_file_rsa) -key $(test_ca_pwd_rsa) -config $(test_ca_server1_config_file) -md sha256 -crldays 365 -revoke server1.crt crl.pem: $(test_ca_crt) $(test_ca_key_file_rsa) $(test_ca_config_file) $(OPENSSL) ca -gencrl -batch -cert $(test_ca_crt) -keyfile $(test_ca_key_file_rsa) -key $(test_ca_pwd_rsa) -config $(test_ca_server1_config_file) -md sha1 -crldays 3653 -out $@ crl-futureRevocationDate.pem: $(test_ca_crt) $(test_ca_key_file_rsa) \ $(test_ca_config_file) \ test-ca.server1.future-crl.db \ test-ca.server1.future-crl.opensslconf $(FAKETIME) -f '+10y' $(OPENSSL) ca -gencrl \ -config test-ca.server1.future-crl.opensslconf -crldays 365 \ -passin "pass:$(test_ca_pwd_rsa)" -out $@ server1_all: crl.pem crl-futureRevocationDate.pem server1.crt server1.noauthid.crt server1.crt.openssl server1.v1.crt server1.v1.crt.openssl server1.key_usage.crt server1.key_usage_noauthid.crt server1.key_usage.crt.openssl server1.cert_type.crt server1.cert_type_noauthid.crt server1.cert_type.crt.openssl server1.der server1.der.openssl server1.v1.der server1.v1.der.openssl server1.key_usage.der server1.key_usage.der.openssl server1.cert_type.der server1.cert_type.der.openssl # server2* parse_input/server2.crt server2.crt: server2.req.sha256 $(MBEDTLS_CERT_WRITE) request_file=server2.req.sha256 serial=2 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA1 version=3 output_file=$@ all_final += server2.crt server2.der: server2.crt $(OPENSSL) x509 -inform PEM -in $< -outform DER -out $@ all_final += server2.crt server2.der server2-sha256.crt: server2.req.sha256 $(MBEDTLS_CERT_WRITE) request_file=server2.req.sha256 serial=2 issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) not_before=20190210144406 not_after=20290210144406 md=SHA256 version=3 output_file=$@ all_final += server2-sha256.crt server2.ku-ka.crt: SERVER2_CRT_SERIAL=42 server2.ku-ka.crt: SERVER2_KEY_USAGE=key_agreement server2.ku-ke.crt: SERVER2_CRT_SERIAL=43 server2.ku-ke.crt: SERVER2_KEY_USAGE=key_encipherment server2.ku-ds.crt: SERVER2_CRT_SERIAL=44 server2.ku-ds.crt: SERVER2_KEY_USAGE=digital_signature server2.ku-ds_ke.crt: SERVER2_CRT_SERIAL=48 server2.ku-ds_ke.crt: SERVER2_KEY_USAGE=digital_signature,key_encipherment server2.ku-%.crt: server2.req.sha256 $(MBEDTLS_CERT_WRITE) request_file=server2.req.sha256 serial=$(SERVER2_CRT_SERIAL) \ issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) \ key_usage="$(SERVER2_KEY_USAGE)" \ not_before=20190210144406 not_after=20290210144406 md=SHA1 version=3 output_file=$@ all_final += server2.ku-ka.crt server2.ku-ke.crt server2.ku-ds.crt server2.ku-ds_ke.crt server2-badsign.crt: server2.crt { head -n-2 $<; tail -n-2 $< | sed -e '1s/0\(=*\)$$/_\1/' -e '1s/[^_=]\(=*\)$$/0\1/' -e '1s/_/1/'; } > $@ all_final += server2-badsign.crt # server3* parse_input/server3.crt server3.crt: server3.key $(MBEDTLS_CERT_WRITE) subject_key=$< subject_name="C=NL,O=PolarSSL,CN=localhost" serial=13 \ issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) \ not_before=20190210144406 not_after=20290210144406 \ md=SHA1 version=3 output_file=$@ all_final += server3.crt # server4* parse_input/server4.crt server4.crt: server4.key $(MBEDTLS_CERT_WRITE) subject_key=$< subject_name="C=NL,O=PolarSSL,CN=localhost" serial=8 \ issuer_crt=$(test_ca_crt_file_ec) issuer_key=$(test_ca_key_file_ec) \ not_before=20190210144400 not_after=20290210144400 \ md=SHA256 version=3 output_file=$@ all_final += server4.crt # MD5 test certificate cert_md_test_key = $(cli_crt_key_file_rsa) cert_md5.csr: $(cert_md_test_key) $(MBEDTLS_CERT_REQ) output_file=$@ filename=$< subject_name="C=NL,O=PolarSSL,CN=PolarSSL Cert MD5" md=MD5 all_intermediate += cert_md5.csr parse_input/cert_md5.crt cert_md5.crt: cert_md5.csr $(MBEDTLS_CERT_WRITE) request_file=$< serial=6 \ issuer_crt=$(test_ca_crt) issuer_key=$(test_ca_key_file_rsa) \ issuer_pwd=$(test_ca_pwd_rsa) \ not_before=20000101121212 not_after=20300101121212 \ md=MD5 version=3 output_file=$@ all_final += cert_md5.crt # TLSv1.3 test certificates ecdsa_secp256r1.key: ec_256_prv.pem cp $< $@ ecdsa_secp256r1.csr: ecdsa_secp256r1.key $(OPENSSL) req -new -subj "/C=NL/O=PolarSSL/CN=localhost" \ -key $< -out $@ all_intermediate += ecdsa_secp256r1.csr ecdsa_secp256r1.crt: ecdsa_secp256r1.csr $(OPENSSL) x509 -req -CA $(test_ca_crt_file_ec) -CAkey $(test_ca_key_file_ec) \ -set_serial 77 -days 3653 -sha384 -in $< -out $@ all_final += ecdsa_secp256r1.crt ecdsa_secp256r1.key tls13_certs: ecdsa_secp256r1.crt ecdsa_secp256r1.key ecdsa_secp384r1.key: ec_384_prv.pem cp $< $@ ecdsa_secp384r1.csr: ecdsa_secp384r1.key $(OPENSSL) req -new -subj "/C=NL/O=PolarSSL/CN=localhost" \ -key $< -out $@ all_intermediate += ecdsa_secp384r1.csr ecdsa_secp384r1.crt: ecdsa_secp384r1.csr $(OPENSSL) x509 -req -CA $(test_ca_crt_file_ec) -CAkey $(test_ca_key_file_ec) \ -set_serial 77 -days 3653 -sha384 -in $< -out $@ all_final += ecdsa_secp384r1.crt ecdsa_secp384r1.key tls13_certs: ecdsa_secp384r1.crt ecdsa_secp384r1.key ecdsa_secp521r1.key: ec_521_prv.pem cp $< $@ ecdsa_secp521r1.csr: ecdsa_secp521r1.key $(OPENSSL) req -new -subj "/C=NL/O=PolarSSL/CN=localhost" \ -key $< -out $@ all_intermediate += ecdsa_secp521r1.csr ecdsa_secp521r1.crt: ecdsa_secp521r1.csr $(OPENSSL) x509 -req -CA $(test_ca_crt_file_ec) -CAkey $(test_ca_key_file_ec) \ -set_serial 77 -days 3653 -sha384 -in $< -out $@ all_final += ecdsa_secp521r1.crt ecdsa_secp521r1.key tls13_certs: ecdsa_secp521r1.crt ecdsa_secp521r1.key # PKCS7 test data pkcs7_test_cert_1 = pkcs7-rsa-sha256-1.crt pkcs7_test_cert_2 = pkcs7-rsa-sha256-2.crt pkcs7_test_cert_3 = pkcs7-rsa-sha256-3.crt pkcs7_test_file = pkcs7_data.bin $(pkcs7_test_file): printf "Hello\15\n" > $@ all_final += $(pkcs7_test_file) pkcs7_zerolendata.bin: printf '' > $@ all_final += pkcs7_zerolendata.bin pkcs7_data_1.bin: printf "2\15\n" > $@ all_final += pkcs7_data_1.bin # Generate signing cert pkcs7-rsa-sha256-1.crt: $(OPENSSL) req -x509 -subj="/C=NL/O=PKCS7/CN=PKCS7 Cert 1" -sha256 -nodes -days 3653 -newkey rsa:2048 -keyout pkcs7-rsa-sha256-1.key -out pkcs7-rsa-sha256-1.crt cat pkcs7-rsa-sha256-1.crt pkcs7-rsa-sha256-1.key > pkcs7-rsa-sha256-1.pem all_final += pkcs7-rsa-sha256-1.crt pkcs7-rsa-sha256-2.crt: $(OPENSSL) req -x509 -subj="/C=NL/O=PKCS7/CN=PKCS7 Cert 2" -sha256 -nodes -days 3653 -newkey rsa:2048 -keyout pkcs7-rsa-sha256-2.key -out pkcs7-rsa-sha256-2.crt cat pkcs7-rsa-sha256-2.crt pkcs7-rsa-sha256-2.key > pkcs7-rsa-sha256-2.pem all_final += pkcs7-rsa-sha256-2.crt pkcs7-rsa-sha256-3.crt: $(OPENSSL) req -x509 -subj="/C=NL/O=PKCS7/CN=PKCS7 Cert 3" -sha256 -nodes -days 3653 -newkey rsa:2048 -keyout pkcs7-rsa-sha256-3.key -out pkcs7-rsa-sha256-3.crt cat pkcs7-rsa-sha256-3.crt pkcs7-rsa-sha256-3.key > pkcs7-rsa-sha256-3.pem all_final += pkcs7-rsa-sha256-3.crt pkcs7-rsa-expired.crt: $(FAKETIME) -f -3650d $(OPENSSL) req -x509 -subj="/C=NL/O=PKCS7/CN=PKCS7 Cert Expired" -sha256 -nodes -days 365 -newkey rsa:2048 -keyout pkcs7-rsa-expired.key -out pkcs7-rsa-expired.crt all_final += pkcs7-rsa-expired.crt # File with an otherwise valid signature signed with an expired cert pkcs7_data_rsa_expired.der: pkcs7-rsa-expired.key pkcs7-rsa-expired.crt pkcs7_data.bin $(OPENSSL) smime -sign -binary -in pkcs7_data.bin -out $@ -md sha256 -inkey pkcs7-rsa-expired.key -signer pkcs7-rsa-expired.crt -noattr -outform DER -out $@ all_final += pkcs7_data_rsa_expired.der # Convert signing certs to DER for testing PEM-free builds pkcs7-rsa-sha256-1.der: $(pkcs7_test_cert_1) $(OPENSSL) x509 -in pkcs7-rsa-sha256-1.crt -out $@ -outform DER all_final += pkcs7-rsa-sha256-1.der pkcs7-rsa-sha256-2.der: $(pkcs7_test_cert_2) $(OPENSSL) x509 -in pkcs7-rsa-sha256-2.crt -out $@ -outform DER all_final += pkcs7-rsa-sha256-2.der pkcs7-rsa-expired.der: pkcs7-rsa-expired.crt $(OPENSSL) x509 -in pkcs7-rsa-expired.crt -out $@ -outform DER all_final += pkcs7-rsa-expired.der # pkcs7 signature file over zero-len data pkcs7_zerolendata_detached.der: pkcs7_zerolendata.bin pkcs7-rsa-sha256-1.key pkcs7-rsa-sha256-1.crt $(OPENSSL) smime -sign -md sha256 -nocerts -noattr -in pkcs7_zerolendata.bin -inkey pkcs7-rsa-sha256-1.key -outform DER -binary -signer pkcs7-rsa-sha256-1.crt -out pkcs7_zerolendata_detached.der all_final += pkcs7_zerolendata_detached.der # pkcs7 signature file with CERT pkcs7_data_cert_signed_sha256.der: $(pkcs7_test_file) $(pkcs7_test_cert_1) $(OPENSSL) smime -sign -binary -in pkcs7_data.bin -out $@ -md sha256 -signer pkcs7-rsa-sha256-1.pem -noattr -outform DER -out $@ all_final += pkcs7_data_cert_signed_sha256.der # pkcs7 signature file with CERT and sha1 pkcs7_data_cert_signed_sha1.der: $(pkcs7_test_file) $(pkcs7_test_cert_1) $(OPENSSL) smime -sign -binary -in pkcs7_data.bin -out $@ -md sha1 -signer pkcs7-rsa-sha256-1.pem -noattr -outform DER -out $@ all_final += pkcs7_data_cert_signed_sha1.der # pkcs7 signature file with CERT and sha512 pkcs7_data_cert_signed_sha512.der: $(pkcs7_test_file) $(pkcs7_test_cert_1) $(OPENSSL) smime -sign -binary -in pkcs7_data.bin -out $@ -md sha512 -signer pkcs7-rsa-sha256-1.pem -noattr -outform DER -out $@ all_final += pkcs7_data_cert_signed_sha512.der # pkcs7 signature file without CERT pkcs7_data_without_cert_signed.der: $(pkcs7_test_file) $(pkcs7_test_cert_1) $(OPENSSL) smime -sign -binary -in pkcs7_data.bin -out $@ -md sha256 -signer pkcs7-rsa-sha256-1.pem -nocerts -noattr -outform DER -out $@ all_final += pkcs7_data_without_cert_signed.der # pkcs7 signature file with signature pkcs7_data_with_signature.der: $(pkcs7_test_file) $(pkcs7_test_cert_1) $(OPENSSL) smime -sign -binary -in pkcs7_data.bin -out $@ -md sha256 -signer pkcs7-rsa-sha256-1.pem -nocerts -noattr -nodetach -outform DER -out $@ all_final += pkcs7_data_with_signature.der # pkcs7 signature file with two signers pkcs7_data_multiple_signed.der: $(pkcs7_test_file) $(pkcs7_test_cert_1) $(pkcs7_test_cert_2) $(OPENSSL) smime -sign -binary -in pkcs7_data.bin -out $@ -md sha256 -signer pkcs7-rsa-sha256-1.pem -signer pkcs7-rsa-sha256-2.pem -nocerts -noattr -outform DER -out $@ all_final += pkcs7_data_multiple_signed.der # pkcs7 signature file with three signers pkcs7_data_3_signed.der: $(pkcs7_test_file) $(pkcs7_test_cert_1) $(pkcs7_test_cert_2) $(pkcs7_test_cert_3) $(OPENSSL) smime -sign -binary -in pkcs7_data.bin -out $@ -md sha256 -signer pkcs7-rsa-sha256-1.pem -signer pkcs7-rsa-sha256-2.pem -signer pkcs7-rsa-sha256-3.pem -nocerts -noattr -outform DER -out $@ all_final += pkcs7_data_3_signed.der # pkcs7 signature file with multiple certificates pkcs7_data_multiple_certs_signed.der: $(pkcs7_test_file) $(pkcs7_test_cert_1) $(pkcs7_test_cert_2) $(OPENSSL) smime -sign -binary -in pkcs7_data.bin -out $@ -md sha256 -signer pkcs7-rsa-sha256-1.pem -signer pkcs7-rsa-sha256-2.pem -noattr -outform DER -out $@ all_final += pkcs7_data_multiple_certs_signed.der # pkcs7 signature file with corrupted CERT pkcs7_data_signed_badcert.der: pkcs7_data_cert_signed_sha256.der cp pkcs7_data_cert_signed_sha256.der $@ echo 'a1' | xxd -r -p | dd of=$@ bs=1 seek=547 conv=notrunc all_final += pkcs7_data_signed_badcert.der # pkcs7 signature file with corrupted signer info pkcs7_data_signed_badsigner.der: pkcs7_data_cert_signed_sha256.der cp pkcs7_data_cert_signed_sha256.der $@ echo 'a1' | xxd -r -p | dd of=$@ bs=1 seek=918 conv=notrunc all_final += pkcs7_data_signed_badsigner.der # pkcs7 signature file with invalid tag in signerInfo[1].serial after long issuer name pkcs7_signerInfo_1_serial_invalid_tag_after_long_name.der: pkcs7_data_multiple_signed.der cp $< $@ echo 'a1' | xxd -r -p | dd of=$@ bs=1 seek=498 conv=notrunc all_final += pkcs7_signerInfo_1_serial_invalid_tag_after_long_name.der # pkcs7 signature file with invalid tag in signerInfo[2] pkcs7_signerInfo_2_invalid_tag.der: pkcs7_data_3_signed.der cp $< $@ echo 'a1' | xxd -r -p | dd of=$@ bs=1 seek=810 conv=notrunc all_final += pkcs7_signerInfo_2_invalid_tag.der # pkcs7 signature file with corrupted signer info[1] pkcs7_data_signed_badsigner1_badsize.der: pkcs7_data_3_signed.der cp pkcs7_data_3_signed.der $@ echo '72' | xxd -p -r | dd of=$@ bs=1 seek=438 conv=notrunc all_final += pkcs7_data_signed_badsigner1_badsize.der pkcs7_data_signed_badsigner1_badtag.der: pkcs7_data_3_signed.der cp pkcs7_data_3_signed.der $@ echo 'a1' | xxd -p -r | dd of=$@ bs=1 seek=442 conv=notrunc all_final += pkcs7_data_signed_badsigner1_badtag.der pkcs7_data_signed_badsigner1_fuzzbad.der: pkcs7_data_3_signed.der cp pkcs7_data_3_signed.der $@ echo 'a1' | xxd -p -r | dd of=$@ bs=1 seek=550 conv=notrunc all_final += pkcs7_data_signed_badsigner1_fuzzbad.der # pkcs7 signature file with corrupted signer info[2] pkcs7_data_signed_badsigner2_badsize.der: pkcs7_data_3_signed.der cp pkcs7_data_3_signed.der $@ echo '72'| xxd -p -r | dd of=$@ bs=1 seek=813 conv=notrunc all_final += pkcs7_data_signed_badsigner2_badsize.der pkcs7_data_signed_badsigner2_badtag.der: pkcs7_data_3_signed.der cp pkcs7_data_3_signed.der $@ echo 'a1'| xxd -p -r | dd of=$@ bs=1 seek=817 conv=notrunc all_final += pkcs7_data_signed_badsigner2_badtag.der pkcs7_data_signed_badsigner2_fuzzbad.der: pkcs7_data_3_signed.der cp pkcs7_data_3_signed.der $@ echo 'a1'| xxd -p -r | dd of=$@ bs=1 seek=925 conv=notrunc all_final += pkcs7_data_signed_badsigner2_fuzzbad.der # pkcs7 file with version 2 pkcs7_data_cert_signed_v2.der: pkcs7_data_cert_signed_sha256.der cp pkcs7_data_cert_signed_sha256.der $@ echo '02' | xxd -r -p | dd of=$@ bs=1 seek=25 conv=notrunc all_final += pkcs7_data_cert_signed_v2.der pkcs7_data_cert_encrypted.der: $(pkcs7_test_file) $(pkcs7_test_cert_1) $(OPENSSL) smime -encrypt -aes256 -in pkcs7_data.bin -binary -outform DER -out $@ pkcs7-rsa-sha256-1.crt all_final += pkcs7_data_cert_encrypted.der ## Negative tests # For some interesting sizes, what happens if we make them off-by-one? pkcs7_signerInfo_issuer_invalid_size.der: pkcs7_data_cert_signed_sha256.der cp $< $@ echo '35' | xxd -r -p | dd of=$@ seek=919 bs=1 conv=notrunc all_final += pkcs7_signerInfo_issuer_invalid_size.der pkcs7_signerInfo_serial_invalid_size.der: pkcs7_data_cert_signed_sha256.der cp $< $@ echo '15' | xxd -r -p | dd of=$@ seek=973 bs=1 conv=notrunc all_final += pkcs7_signerInfo_serial_invalid_size.der # pkcs7 signature file just with signed data pkcs7_data_cert_signeddata_sha256.der: pkcs7_data_cert_signed_sha256.der dd if=pkcs7_data_cert_signed_sha256.der of=$@ skip=19 bs=1 all_final += pkcs7_data_cert_signeddata_sha256.der # - test-ca-v1.crt: v1 "CA", signs # server1-v1.crt: v1 "intermediate CA", signs # server2-v1*.crt: EE cert (without of with chain in same file) test-ca-v1.crt: $(test_ca_key_file_rsa) test-ca.req.sha256 $(MBEDTLS_CERT_WRITE) is_ca=1 serial_hex=53a2b68e05400e555c9395e5 \ request_file=test-ca.req.sha256 \ selfsign=1 issuer_name="CN=PolarSSL Test CA v1,OU=testing,O=PolarSSL,C=NL" \ issuer_key=$(test_ca_key_file_rsa) issuer_pwd=$(test_ca_pwd_rsa) \ not_before=20190210144400 not_after=20290210144400 md=SHA256 version=1 \ output_file=$@ all_final += test-ca-v1.crt server1-v1.crt: server1.key test-ca-v1.crt $(MBEDTLS_CERT_WRITE) subject_key=$< serial_hex=53a2b6c704cd4d8ebc800bc1\ subject_name="CN=server1/int-ca-v1,OU=testing,O=PolarSSL,C=NL" \ issuer_crt=test-ca-v1.crt issuer_key=$(test_ca_key_file_rsa) \ issuer_pwd=$(test_ca_pwd_rsa) \ not_before=20190210144406 not_after=20290210144406 \ md=SHA256 version=1 \ output_file=$@ all_final += server1-v1.crt server2-v1.crt: server2.key server1-v1.crt $(MBEDTLS_CERT_WRITE) subject_key=$< serial_hex=53a2b6d9235dbc4573f9b76c\ subject_name="CN=server2,OU=testing,O=PolarSSL,C=NL" \ issuer_crt=server1-v1.crt issuer_key=server1.key \ not_before=20190210144406 not_after=20290210144406 \ md=SHA256 version=1 \ output_file=$@ all_final += server2-v1.crt server2-v1-chain.crt: server2-v1.crt server1-v1.crt cat $^ > $@ ################################################################ #### Generate C format test certs header ################################################################ TEST_CERTS_H_INPUT_FILES=test-ca2.crt \ test-ca2.crt.der \ test-ca2.key.enc \ test-ca2.key.der \ test-ca-sha256.crt \ test-ca-sha256.crt.der \ test-ca-sha1.crt \ test-ca-sha1.crt.der \ test-ca.key \ test-ca.key.der \ server5.crt \ server5.crt.der \ server5.key \ server5.key.der \ server2-sha256.crt \ server2-sha256.crt.der \ server2.crt \ server2.crt.der \ server2.key \ server2.key.der \ cli2.crt \ cli2.crt.der \ cli2.key \ cli2.key.der \ cli-rsa-sha256.crt \ cli-rsa-sha256.crt.der \ cli-rsa.key \ cli-rsa.key.der ../src/test_certs.h: ../scripts/generate_test_cert_macros.py \ $(TEST_CERTS_H_INPUT_FILES) ../scripts/generate_test_cert_macros.py --output $@ \ --string TEST_CA_CRT_EC_PEM=test-ca2.crt \ --binary TEST_CA_CRT_EC_DER=test-ca2.crt.der \ --string TEST_CA_KEY_EC_PEM=test-ca2.key.enc \ --password TEST_CA_PWD_EC_PEM=PolarSSLTest \ --binary TEST_CA_KEY_EC_DER=test-ca2.key.der \ --string TEST_CA_CRT_RSA_SHA256_PEM=test-ca-sha256.crt \ --binary TEST_CA_CRT_RSA_SHA256_DER=test-ca-sha256.crt.der \ --string TEST_CA_CRT_RSA_SHA1_PEM=test-ca-sha1.crt \ --binary TEST_CA_CRT_RSA_SHA1_DER=test-ca-sha1.crt.der \ --string TEST_CA_KEY_RSA_PEM=test-ca.key \ --password TEST_CA_PWD_RSA_PEM=PolarSSLTest \ --binary TEST_CA_KEY_RSA_DER=test-ca.key.der \ --string TEST_SRV_CRT_EC_PEM=server5.crt \ --binary TEST_SRV_CRT_EC_DER=server5.crt.der \ --string TEST_SRV_KEY_EC_PEM=server5.key \ --binary TEST_SRV_KEY_EC_DER=server5.key.der \ --string TEST_SRV_CRT_RSA_SHA256_PEM=server2-sha256.crt \ --binary TEST_SRV_CRT_RSA_SHA256_DER=server2-sha256.crt.der \ --string TEST_SRV_CRT_RSA_SHA1_PEM=server2.crt \ --binary TEST_SRV_CRT_RSA_SHA1_DER=server2.crt.der \ --string TEST_SRV_KEY_RSA_PEM=server2.key \ --binary TEST_SRV_KEY_RSA_DER=server2.key.der \ --string TEST_CLI_CRT_EC_PEM=cli2.crt \ --binary TEST_CLI_CRT_EC_DER=cli2.crt.der \ --string TEST_CLI_KEY_EC_PEM=cli2.key \ --binary TEST_CLI_KEY_EC_DER=cli2.key.der \ --string TEST_CLI_CRT_RSA_PEM=cli-rsa-sha256.crt \ --binary TEST_CLI_CRT_RSA_DER=cli-rsa-sha256.crt.der \ --string TEST_CLI_KEY_RSA_PEM=cli-rsa.key \ --binary TEST_CLI_KEY_RSA_DER=cli-rsa.key.der ################################################################ #### Diffie-Hellman parameters ################################################################ dh.998.pem: $(OPENSSL) dhparam -out $@ -text 998 dh.999.pem: $(OPENSSL) dhparam -out $@ -text 999 ################################################################ #### Meta targets ################################################################ all_final: $(all_final) all: $(all_intermediate) $(all_final) .PHONY: default all_final all .PHONY: keys_rsa_all .PHONY: keys_rsa_unenc keys_rsa_enc_basic .PHONY: keys_rsa_enc_pkcs8_v1 keys_rsa_enc_pkcs8_v2 .PHONY: keys_rsa_enc_basic_1024 keys_rsa_enc_basic_2048 keys_rsa_enc_basic_4096 .PHONY: keys_rsa_enc_pkcs8_v1_1024 keys_rsa_enc_pkcs8_v2_1024 .PHONY: keys_rsa_enc_pkcs8_v1_2048 keys_rsa_enc_pkcs8_v2_2048 .PHONY: keys_rsa_enc_pkcs8_v1_4096 keys_rsa_enc_pkcs8_v2_4096 .PHONY: server1_all # These files should not be committed to the repository. list_intermediate: @printf '%s\n' $(all_intermediate) | sort # These files should be committed to the repository so that the test data is # available upon checkout without running a randomized process depending on # third-party tools. list_final: @printf '%s\n' $(all_final) | sort .PHONY: list_intermediate list_final ## Remove intermediate files clean: rm -f $(all_intermediate) ## Remove all build products, even the ones that are committed neat: clean rm -f $(all_final) .PHONY: clean neat .SECONDARY: $(all_intermediate)