Cases where radix was explictly declared are removed in most cases,
replaced using script. bignum arguments are represented as hexadecimal
strings. This reduces clutter in test data and makes bit patterns
clearer.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
No need to bypass the API to fill limbs. It's a better test to just
set the top bit that we want to have set, and it's one less bypass of
the API.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test both 0 represented with 0 limbs ("0 (null)") and 0 represented
with 1 limb ("0 (1 limb)"), because occasionally there are bugs with
0-limb bignums and occasionally there are bugs with removing leading
zero limbs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_mpi_exp_mod can be called in three ways regarding the speed-up
parameter _RR: null (unused), zero (will be updated), nonzero (will be
used). Systematically test all three.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove the RR parameter to the mbedtls_mpi_exp_mod test function.
It was never used in the test data, so there is no loss of functionality.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test mbedtls_mpi_safe_cond_assign() and mbedtls_mpi_safe_cond_swap()
with their "unsafe" counterparts mbedtls_mpi_copy() and
mbedtls_mpi_swap(). This way we don't need to repeat the coverage of
test cases.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Similarly to "Overhaul testing of mbedtls_mpi_copy", simplify the code
to test mbedtls_mpi_swap to have just one function for distinct MPIs
and one function for swapping an MPI with itself, covering all cases
of size (0, 1, >1) and sign (>0, <0).
The test cases are exactly the same as for mbedtls_mpi_copy with the
following replacements:
* `Copy` -> `Swap`
* ` to ` -> ` with `
* `_copy` -> `_swap`
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Replace the two test functions mbedtls_mpi_copy_sint (supporting signed
inputs but always with exactly one limb) and mbedtls_mpi_copy_binary
(supporting arbitrary-sized inputs but not negative inputs) by a single
function that supports both arbitrary-sized inputs and arbitrary-signed
inputs. This will allows testing combinations like negative source and
zero-sized destination.
Also generalize mpi_copy_self to support arbitrary inputs.
Generate a new list of test cases systematically enumerating all
possibilities among various categories: zero with 0 or 1 limb, negative or
positive with 1 limb, negative or positive with >1 limb. I used the
following Perl script:
```
sub rhs { $_ = $_[0]; s/bead/beef/; s/ca5cadedb01dfaceacc01ade/face1e55ca11ab1ecab005e5/; $_ }
%v = (
"zero (null)" => "",
"zero (1 limb)" => "0",
"small positive" => "bead",
"large positive" => "ca5cadedb01dfaceacc01ade",
"small negative" => "-bead",
"large negative" => "-ca5cadedb01dfaceacc01ade",
);
foreach $s (sort keys %v) {
foreach $d (sort keys %v) {
printf "Copy %s to %s\nmbedtls_mpi_copy:\"%s\":\"%s\"\n\n",
$s, $d, $v{$s}, rhs($v{$d});
}
}
foreach $s (sort keys %v) {
printf "Copy self: %s\nmpi_copy_self:\"%s\"\n\n", $s, $v{$s};
}
```
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is mostly to look for cases where the sign bit may have been left at 0
after zerozing memory, or a value of 0 with the sign bit set to -11. Both of
these mostly work fine, so they can go otherwise undetected by unit tests,
but they can break when certain combinations of functions are used.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Replace calls to mbedtls_mpi_read_string() with a wrapper
mbedtls_test_read_mpi() when reading test data except for the purpose
of testing mbedtls_mpi_read_string() itself. The wrapper lets the test
data control precisely how many limbs the constructed MPI has.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Slightly simplify is_significantly_above_a_power_of_2() to make it
easier to understand:
* Remove the explicit negative answer for x <= 4. The only functional
difference this makes is that is_significantly_above_a_power_of_2(3)
is now true.
* Shift the most significant bit of x to position 8 rather than 15.
This makes the final comparison easier to explain.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add unit tests for mbedtls_mpi_fill_random() and mbedtls_mpi_random()
when the resulting MPI object previously had a nonzero value. I wrote
those to catch a bug that I introduced during the development of
mbedtls_mpi_random() (but does not appear in a committed version).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_mpi_random() uses mbedtls_mpi_cmp_mpi_ct(), which requires its
two arguments to have the same storage size. This was not the case
when the upper bound passed to mbedtls_mpi_random() had leading zero
limbs.
Fix this by forcing the result MPI to the desired size. Since this is
not what mbedtls_mpi_fill_random() does, don't call it from
mbedtls_mpi_random(), but instead call a new auxiliary function.
Add tests to cover this and other conditions with varying sizes for
the two arguments.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Since mbedtls_mpi_random() is not specific to ECC code, move it from
the ECP module to the bignum module.
This increases the code size in builds without short Weierstrass
curves (including builds without ECC at all) that do not optimize out
unused functions.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove tests related to NULL pointers,
keep tests related to invalid enum values.
Remove test code related to MBEDTLS_CHECK_PARAMS.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Signed-off-by: TRodziewicz <tomasz.rodziewicz@mobica.com>
Run all the addition and subtraction tests with the result aliased to
the first operand and with the result aliased to the second operand.
Before, only some of the aliasing possibilities were tested, for only
some of the functions, with only some inputs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fixes an issue where configs that had `MBEDTLS_MPI_MAX_BITS` greater than 256
but smaller than the test that was running (792 bits) the test would fail
incorrectly.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Move dependancy on `MBEDTLS_MPI_MAX_BITS` to apply to the specific test cases
which will break when `MBEDTLS_MPI_MAX_BITS` is too small. This re-enables
previous tests that were turned off accidentally.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Previously `mbedtls_mpi_exp_mod` was tested with values that were over
`MBEDTLS_MPI_MAX_SIZE` in size. This is useful to do as some paths are only
taken when the exponent is large enough however, on builds where
`MBEDTLS_MPI_MAX_SIZE` is under the size of these test values.
This fix turns off these tests when `MBEDTLS_MPI_MAX_SIZE` is too small to
safely test (notably this is the case in config-thread.h).
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reword test cases to be easier to read and understand.
Adds comments to better explain what the test is doing.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
* development: (488 commits)
Fix removal of deprecated PSA constants
Use GitHub-compatible table formatting
Remove psa header files in uninstall part
Change function casting in `ssl_calc_finished_tls_sha384`
Fix GCC warning in `ssl_calc_finished_tls_sha384`
Add changelog entry file to `ChangeLog.d`
Fix GCC warning in `ssl_calc_finished_tls_sha384`
Fix GCC warning about `test_snprintf`
Fix mismatched function parameters (prototype/definition)
Fix build failure on gcc-11
Copyediting
Clarifications around key import
Fix copypasta
A variable is unused in some configurations
Rename test_driver_keygen to test_driver_key_management
Move "internal use" sentence attached to the wrong function
Added changelog
Plug in the entry point for public key export through driver
tests: psa: Reset key attributes where needed
Improve/fix documentation
...
Adds test cases to ensure that `mbedtls_mpi_exp_mod` will return an error with
an exponent or modulus that is greater than `MBEDTLS_MPI_MAX_SIZE` in size.
Adds test cases to ensure that Diffie-Hellman will fail to make a key pair
(using `mbedtls_dhm_make_public`) when the prime modulus is greater than
`MBEDTLS_MPI_MAX_SIZE` in size.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Positive tests: test that the RNG has the expected size, given that we
know how many leading zeros it has because we know how the function
consumes bytes and when the test RNG produces null bytes.
Negative tests: test that if the RNG is willing to emit less than the
number of wanted bytes, the function fails.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The test function mbedtls_mpi_lt_mpi_ct did not initialize ret in test
code. If there was a bug in library code whereby the library function
mbedtls_mpi_lt_mpi_ct() did not set ret when it should, we might have
missed it if ret happened to contain the expected value. So initialize
ret to a value that we never expect.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Command to find the files in which lines have gone
larger than 79 characters due to the renaming:
grep '.\{80\}' \
`git diff-tree --no-commit-id --name-only -r HEAD` \
| grep "\<mbedtls_test_rnd_"
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Command to find the files in which lines have gone
larger than 79 characters due to the renaming:
grep '.\{80\}' \
`git diff-tree --no-commit-id --name-only -r HEAD` \
| grep hexcmp
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The signature of mbedtls_mpi_cmp_mpi_ct() meant to support using it in
place of mbedtls_mpi_cmp_mpi(). This meant full comparison functionality
and a signed result.
To make the function more universal and friendly to constant time
coding, we change the result type to unsigned. Theoretically, we could
encode the comparison result in an unsigned value, but it would be less
intuitive.
Therefore we won't be able to represent the result as unsigned anymore
and the functionality will be constrained to checking if the first
operand is less than the second. This is sufficient to support the
current use case and to check any relationship between MPIs.
The only drawback is that we need to call the function twice when
checking for equality, but this can be optimised later if an when it is
needed.
The function `mbedtls_mpi_write_binary()` writes big endian byte order,
but we need to be able to write little endian in some caseses. (For
example when handling keys corresponding to Montgomery curves.)
Used `echo xx | tac -rs ..` to transform the test data to little endian.
The function `mbedtls_mpi_read_binary()` expects big endian byte order,
but we need to be able to read from little endian in some caseses. (For
example when handling keys corresponding to Montgomery curves.)
Used `echo xx | tac -rs .. | tr [a-z] [A-Z]` to transform the test data
to little endian and `echo "ibase=16;xx" | bc` to convert to decimal.
