The race condition mentioned in the previous commit
"Stop CMake out of source tests running on 16.04"
has also been observed with test_cmake_as_subdirectory and can presumably
happen with test_cmake_as_package and test_cmake_as_package_install as well.
So skip all of these components on Ubuntu 16.04.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix library references, tests and programs.
Testing is performed in the already present all.sh test.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
As we have now a minimal viable implementation of TLS 1.3,
let's remove EXPERIMENTAL from the config option enabling
it.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Run tests with middlebox compatibility enabled but tests
dedicated to middlebox compatibility disabled.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add ECDSA and RSA signature acceleration testing
with signature capabilitites removed from the
Mbed TLS library.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This commit removes the test_psa_crypto_config_basic
all.sh component that can no longer work without
adapting it to the separately compiled test driver
library. This component is replaced by several
components in the following commits to test various
type of acceleration independently.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Running the out of source CMake test on Ubuntu 16.04 using more than one
processor (as the CI does) can create a race condition whereby the build
fails to see a generated file, despite that file actually having been
generated. This problem appears to go away with 18.04 or newer, so make
the out of source tests not supported on Ubuntu 16.04
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Non-regression for the fix in https://github.com/ARMmbed/mbedtls/pull/5126:
libmbedtls and libmbedx509 did not declare their dependencies on libmbedx509
and libmbedcrypto when built with make.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Set the build type to Release (-O2) when running CPU-intensive tests (ssl-opt,
or unit tests with debug features). A build type of Check (-Os) would be best
when the main objective of the build is to check for build errors or warnings
and there aren't many tests to run; in this commit there are no such test
cases to change. Only use cmake with no build type (which results in not
passing a -O option, and thus missing some GCC warnings) when exercising cmake
features.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Use Release mode (-O2) for component_test_full_cmake_clang which runs SSL
tests.
To have some coverage with Check mode (which enables more compiler warnings
but compiles with -Os), change a few other builds that only run unit tests
at most to Check mode.
Don't add any new builds, to keep the total build volume down. We don't need
extensive coverage of all combinations, just a reasonable set.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
SSL testing benefits from faster executables, so use -O2 rather than -O1.
Some builds use -O1, but that's intended for jobs that only run unit tests,
where the build takes longer than the tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't default to unbridled -j, which causes a load spike and isn't really
faster.
"Number of CPUs" is implemented here as a reasonable compromise between
portability, correctness and simplicity. This is just a default that can be
overridden by setting MAKEFLAGS in the environment.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When not using DEBUG_C, but using the DTLS CID feature -
a null pointer was accessed in ssl_tls.c.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
To facilitate maintenance and to make it easier to reproduce all.sh builds
manually, remove the long, repeated list of -D options from
component_test_psa_crypto_config_basic and component_test_psa_crypto_drivers
and put it in a header file instead.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When building with make, `make test` runs `run-test-suites.pl` which has a
verbose mode that reports the failing test cases, but it didn't provide a
way to enable this verbose mode. With the present commit, you can run `make
test TEST_FLAGS=-v` to use verbose mode.
Base the default for verbose mode on the same environment variable that
`make test` uses when building with CMake: default off, but enabled if
`CTEST_OUTPUT_ON_FAILURE` is true. In particular, verbose mode will now be
on when building from `all.sh`.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Rather than having the tests seperated into different files, they were integrated
into translate_ciphers.py and can be run from root using:
`python -m unittest tests/scripts/translate_ciphers.py`
test_translate_ciphers_format.sh was originally made as a testing ground before
having the translation tool being implmented into compat.sh. Translating it to
python code makes it redundant and therefore it will be removed.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
To run test_translate_ciphers_names.py and _format.sh in the CI, include
it in all.sh component_check_generate_test_code.
Rename check_generate_test_code to check_test_helpers
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
In build_arm_none_eabi_gcc_m0plus, use baremetal_size instead of baremetal
as the configuration, i.e. exclude debugging features. This job is the only
one switching to baremetal_size because it's our primary point of reference
for code size evolution, and which is the only job where we display the code
size built with -Os so it's presumably the only job for which we really care
about a meaningful code size report.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is necessary to import check_names from other scripts, which
will inevitably happen in the next few commits to implement the equivalent
of `list-identifiers.sh --internal`.
Signed-off-by: Yuto Takano <yuto.takano@arm.com>
Otherwise $COMMAND_LINE_COMPONENTS would try to expand wildcard patterns
based on files in the current directory.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Was getting errors like:
In file included from /usr/include/limits.h:25:0,
from /usr/lib/gcc-cross/arm-linux-gnueabi/5/include-fixed/limits.h:168,
from /usr/lib/gcc-cross/arm-linux-gnueabi/5/include-fixed/syslimits.h:7,
from /usr/lib/gcc-cross/arm-linux-gnueabi/5/include-fixed/limits.h:34,
from ../include/mbedtls/check_config.h:30,
from ../include/mbedtls/build_info.h:81,
from common.h:26,
from asn1write.c:20:
/usr/include/features.h:367:25: fatal error: sys/cdefs.h: No such file or directory
There are two packages to choose from: armhf or armel. Since the comment
in all.sh says we're trying to be close to Debian's "armel"
architecture, choose that, and fix a comment that was mentioning
gnueabihf for no apparent reason.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Currently it can't be mandatory, since we can't install the required toolchain
on Jenkins right away.
Also, while at it, remove `SHELL='sh -x'` from the other arm5vte component; it
was a leftover from debugging.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Have simpler patterns related to 'test' (the central objective being to keep
going if 'make test' or 'tests/...' fails, but not if 'make tests' fails).
Add 'cd' as a can't-keep-going command.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Count invocations from 1 to n instead of n to 1.
Explain how changing the loop variable would cause an error if the function
was not executed in a subshell.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
all.sh restores **/Makefile from git in case the version in the worktree was
from doing a cmake in-tree build. Instead of doing this unconditionally, do
it only if the toplevel Makefile seems to have been automatically
generated (by cmake or otherwise, e.g. by mbedtls-prepare-build). This way
all.sh no longer silently wipes changes made to Makefile but not committed yet.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Back up the config files at the beginning of all.sh, rather than before each
component. In particular, create the backup before running cleanup for the
first time. This fixes#3139 (all.sh using a config.h.bak from a previous
job), and makes all.sh more robust against accidentally using a modified
config.h midway through because a component messed with the backup.
Use a different extension (*.all.bak rather than *.bak) for the backups.
This is necessary to ensure that auxiliary scripts such as depends*.pl that
make their own backup don't remove all.sh's backup, which the code from this
commit does not support.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Generate programs/test/cpp_dummy_build.cpp dynamically instead of
maintaining it manually. This removes the need to update it when the list of
headers changes.
Include all the headers unconditionally except for the ones that cannot be
included directly.
Support this dynamic generation both with make and with cmake.
Adapt all.sh accordingly. Remove the redundant C build from
component_build_default_make_gcc_and_cxx (it was also done in
component_test_default_out_of_box), leaving a component_test_make_cxx. Also
run the C++ program, because why not. Do this in the full configuration
which may catch a bit more problems in headers.
Fixes#2570 for good.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
redirect_out was no longer used and redirect_err was only used to
quiet dd. Change the dd invocation to only print diagnostics on
error (on platforms where this is possible).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is necessary to actually keep going and finish the
component-specific cleanup in component_test_cmake_out_of_source if
ssl-opt.err is non-empty.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In all.sh, when an explicit list of components is specified, error out
if one of the components is not known or not supported. Patterns that
happen to match zero components are still effectively ignored.
Fix#2783
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In the `not` function, in keep-going mode, arrange to report the
failing command (rather than `"$@"`).
Note that the `!` keyword should not be used, because failures with
`!` are not reported properly.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove the obsolete functions record_status and if_build_succeeded.
They didn't affect error detection, but they made error reporting
worse since $BASH_COMMAND would be the unexpanded "$@".
Keep the function definitions for the sake of pull requests using them
that may still be in flight.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove ssl-opt.err even if it's empty.
Call cat unconditionally: it'll have no visible effect if the file is
empty.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit completely rewrites keep-going mode. Instead of relying
solely on "set -e", which has some subtle limitations (such as being
off anywhere inside a conditional), use an ERR trap to record errors.
Run each component in a subshell. This way a component can set
environment variables, change the current directory, etc., without
affecting other components.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This will let us use bash features that are not found in some other sh
implementations, such as DEBUG and ERR traps, "set -o pipefail", etc.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It was used to remove the code used when mbedtls_ecp_mul() received a
NULL RNG parameter. This code is no longer relevant (as the RNG may no
longer be NULL) and will be unconditionally removed in the next commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
It would be possible to make SSL debugging compatible with MBEDTLS_DHM_ALT,
but too much low-priority work right now, so don't require it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
... unless the alt implementation defines a group structure that's mostly
compatible with the built-in one and supports partially filled group
structures in the same way.
It would be possible to rewrite the SpecifiedECDomain parsing code to avoid
requiring support for partially filled group structures, but that's too
complicated to do now.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Use headers defining dummy context types.
The test does not pass yet. I plan to fix this in subsequent commits.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This change enables automatic detection and consumption of Mbed TLS
library targets from within other CMake projects. By generating an
`MbedTLSConfig.cmake` file, consuming projects receive a more complete
view of these targets, allowing them to be used as dependencies which
properly inherit the transitive dependencies of the libraries.
This is fairly fragile, as it seems Mbed TLS's libraries do not appear
to properly model their dependencies on other targets, including
third-party dependencies. It is, however, sufficient for building and
linking the compiled Mbed TLS libraries when there are no third-party
dependencies involved. Further work is needed for more complex
use-cases, but this will likely meet the needs of most projects.
Resolves#298. Probably useful for #2857.
Signed-off-by: Chris Kay <chris.kay@arm.com>
Commit removes the definition of
MBEDTLS_ECDH_LEGACY_CONTEXT from config.h.
Additionally removes the unset calls to
MBEDTLS_ECDH_LEGACY_CONTEXT in all.sh.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Remove tests related to NULL pointers,
keep tests related to invalid enum values.
Remove test code related to MBEDTLS_CHECK_PARAMS.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Signed-off-by: TRodziewicz <tomasz.rodziewicz@mobica.com>
On space-constrained platforms, it is a useful configuration to be able
to import/export and perform RSA key pair operations, but to exclude RSA
key generation, potentially saving flash space. It is not possible to
express this with the PSA_WANT_ configuration system at the present
time. However, in previous versions of Mbed TLS (v2.24.0 and earlier) it
was possible to configure a software PSA implementation which was
capable of making RSA signatures but not capable of generating RSA keys.
To do this, one unset MBEDTLS_GENPRIME.
Since the addition of MBEDTLS_PSA_BUILTIN_KEY_TYPE_RSA_KEY_PAIR, this
expressivity was lost. Expressing that you wanted to work with RSA key
pairs forced you to include the ability to generate key pairs as well.
Change psa_crypto_rsa.c to only call mbedtls_rsa_gen_key() if
MBEDTLS_GENPRIME is also set. This restores the configuration behavior
present in Mbed TLS v2.24.0 and earlier versions.
It left as a future exercise to add the ability to PSA to be able to
express a desire for a software or accelerator configuration that
includes RSA key pair operations, like signature, but excludes key pair
generation.
Without this change, linker errors will occur when attempts to call,
which doesn't exist when MBEDTLS_GENPRIME is unset.
psa_crypto_rsa.c.obj: in function `rsa_generate_key':
psa_crypto_rsa.c:320: undefined reference to `mbedtls_rsa_gen_key'
Fixes#4512
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
Re-create a component check_generated_files. Unlike the old one, which checked
that the generated files were up-to-date, the job of the new one is to check
that tests/scripts/check-generated-files.sh works (at least to the extent of
not errorring out).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Now that generated source files are no longer checked in version
control, they must be generated before running any tests.
Do not check the generated files for freshness: it's no longer relevant.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Building the library without entropy sources negates any and all security
provided by the library.
This option was originally requested a relatively long time ago and it
does not provide any tangible benefit for users any more.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
According to the design in psa-driver-interface.md. Compiles without
issue in test_psa_crypto_drivers.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Add cipher accelerator compilation flags to
test_psa_crypto_drivers() all.sh component. The flags
are not necessary currently but may become.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Test cipher operations by a transparent driver in all.sh
test_psa_crypto_config_basic and
test_psa_crypto_drivers components.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Test hash algorithm functions when called through a transparent
driver in all.sh test_psa_crypto_config_basic and
test_psa_crypto_drivers components.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Test signature and signature verification by a transparent
driver in all.sh test_psa_crypto_config_basic and
test_psa_crypto_drivers components.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The point of having an external RNG is that you can disable all
built-in RNG functionality: both the entropy part and the DRBG part.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The SSL test programs can now use mbedtls_psa_get_random() rather than
entropy+DRBG as a random generator. This happens if
the configuration option MBEDTLS_USE_PSA_CRYPTO is enabled, or if
MBEDTLS_TEST_USE_PSA_CRYPTO_RNG is set at build time.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Extend import/export/generate key through a PSA
transparent driver without software fallback
testing to RSA keys.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Whether MBEDTLS_USE_PSA_CRYPTO is enabled makes a significant
difference with respect to how random generators are used (and, for
no-HMAC_DRBG, how ECDSA signature is dispatched), so test both with
and without it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The compilation guards in key_management.c are now
accelerator compilation guards (MBEDTLS_PSA_ACCEL_KEY_TYPE_xyz).
As a consequence when running the PSA driver wrapper
tests as part of test_psa_crypto_config_basic
and test_psa_crypto_drivers all.sh components all
key management cryptographic operations were handled by
the software builtin fallback, and not by the test driver
as intended in the first place.
This commits fixes this issue by:
. declaring an accelerator for ECC key pairs in
test_psa_crypto_config_basic.
. declaring an accelerator for both ECC and RSA
key pairs in test_psa_crypto_drivers.
It is possible to declare an accelerator for both
ECC and RSA key pairs in test_psa_crypto_drivers
and not in test_psa_crypto_config_basic because
in the case of test_psa_crypto_drivers the new
PSA configuration is not activated. That way,
the builtin fallback software implementation
is present to supply the transparent test driver
when some support is missing in it (mainly
RSA key generation).
Note that the declaration of accelerators does
much more than just "fixing" the execution flow of
driver wrapper tests, it makes all import and public
key export cryptographic operations in all unit
tests being handled by the transparent test driver
(provided that it supports the key type).
One test case related to key generation is
partially disabled. This will be fixed with the
rework of psa_generate_key along the lines
described in psa-crypto-implementation-structure.md.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
