a compile time print was added warning in case of 128bit ctr_drbg keys.
This was don't to avoid an actual warning in these cases
(making build with warnings as errors possible).
Additional warnings on the Changelog/headers were set to use the same phrasing
phrasing was approved by Gilles and Janos.
This setting belongs to the individual connection, not to a configuration
shared by many connections. (If a default value is desired, that can be handled
by the application code that calls mbedtls_ssl_set_mtu().)
There are at least two ways in which this matters:
- per-connection settings can be adjusted if MTU estimates become available
during the lifetime of the connection
- it is at least conceivable that a server might recognize restricted clients
based on range of IPs and immediately set a lower MTU for them. This is much
easier to do with a per-connection setting than by maintaining multiple
near-duplicated ssl_config objects that differ only by the MTU setting.
The standard HKDF security guarantees only hold if `mbedtls_hkdf()` is
used or if `mbedtls_hkdf_extract()` and `mbedtls_hkdf_expand()` are
called in succession carefully and an equivalent way.
Making `mbedtls_hkdf_extract()` and `mbedtls_hkdf_expand()` static would
prevent any misuse, but doing so would require the TLS 1.3 stack to
break abstraction and bypass the module API.
To reduce the risk of misuse we add warnings to the function
descriptions.
In ecp_mul_comb(), if (!p_eq_g && grp->T == NULL) and then ecp_precompute_comb() fails (which can
happen due to OOM), then the new array of points T will be leaked (as it's newly allocated, but
hasn't been asigned to grp->T yet).
Symptom was a memory leak in ECDHE key exchange under low memory conditions.
The basis for the Lucky 13 family of attacks is for an attacker to be able to
distinguish between (long) valid TLS-CBC padding and invalid TLS-CBC padding.
Since our code sets padlen = 0 for invalid padding, the length of the input to
the HMAC function, and the location where we read the MAC, give information
about that.
A local attacker could gain information about that by observing via a
cache attack whether the bytes at the end of the record (at the location of
would-be padding) have been read during MAC verification (computation +
comparison).
Let's make sure they're always read.
The basis for the Lucky 13 family of attacks is for an attacker to be able to
distinguish between (long) valid TLS-CBC padding and invalid TLS-CBC padding.
Since our code sets padlen = 0 for invalid padding, the length of the input to
the HMAC function gives information about that.
Information about this length (modulo the MD/SHA block size) can be deduced
from how much MD/SHA padding (this is distinct from TLS-CBC padding) is used.
If MD/SHA padding is read from a (static) buffer, a local attacker could get
information about how much is used via a cache attack targeting that buffer.
Let's get rid of this buffer. Now the only buffer used is the internal MD/SHA
one, which is always read fully by the process() function.
Fix Documentation error in `mbedtls_ssl_get_session`.
This function supports deep copying of the session,
and the peer certificate is not lost anymore, Resolves#926
* development: (180 commits)
Change the library version to 2.11.0
Fix version in ChangeLog for fix for #552
Add ChangeLog entry for clang version fix. Issue #1072
Compilation warning fixes on 32b platfrom with IAR
Revert "Turn on MBEDTLS_SSL_ASYNC_PRIVATE by default"
Fix for missing len var when XTS config'd and CTR not
ssl_server2: handle mbedtls_x509_dn_gets failure
Fix harmless use of uninitialized memory in ssl_parse_encrypted_pms
SSL async tests: add a few test cases for error in decrypt
Fix memory leak in ssl_server2 with SNI + async callback
SNI + SSL async callback: make all keys async
ssl_async_resume: free the operation context on error
ssl_server2: get op_name from context in ssl_async_resume as well
Clarify "as directed here" in SSL async callback documentation
SSL async callbacks documentation: clarify resource cleanup
Async callback: use mbedtls_pk_check_pair to compare keys
Rename mbedtls_ssl_async_{get,set}_data for clarity
Fix copypasta in the async callback documentation
SSL async callback: cert is not always from mbedtls_ssl_conf_own_cert
ssl_async_set_key: detect if ctx->slots overflows
...
* development: (182 commits)
Change the library version to 2.11.0
Fix version in ChangeLog for fix for #552
Add ChangeLog entry for clang version fix. Issue #1072
Compilation warning fixes on 32b platfrom with IAR
Revert "Turn on MBEDTLS_SSL_ASYNC_PRIVATE by default"
Fix for missing len var when XTS config'd and CTR not
ssl_server2: handle mbedtls_x509_dn_gets failure
Fix harmless use of uninitialized memory in ssl_parse_encrypted_pms
SSL async tests: add a few test cases for error in decrypt
Fix memory leak in ssl_server2 with SNI + async callback
SNI + SSL async callback: make all keys async
ssl_async_resume: free the operation context on error
ssl_server2: get op_name from context in ssl_async_resume as well
Clarify "as directed here" in SSL async callback documentation
SSL async callbacks documentation: clarify resource cleanup
Async callback: use mbedtls_pk_check_pair to compare keys
Rename mbedtls_ssl_async_{get,set}_data for clarity
Fix copypasta in the async callback documentation
SSL async callback: cert is not always from mbedtls_ssl_conf_own_cert
ssl_async_set_key: detect if ctx->slots overflows
...
Fix compilation warnings with IAR toolchain, on 32 bit platform.
Reported by rahmanih in #683
This is based on work by Ron Eldor in PR #750, some of which was independently
fixed by Azim Khan and already merged in PR #1646.
Summary of merge conflicts:
include/mbedtls/ecdh.h -> documentation style
include/mbedtls/ecdsa.h -> documentation style
include/mbedtls/ecp.h -> alt style, new error codes, documentation style
include/mbedtls/error.h -> new error codes
library/error.c -> new error codes (generated anyway)
library/ecp.c:
- code of an extracted function was changed
library/ssl_cli.c:
- code addition on one side near code change on the other side
(ciphersuite validation)
library/x509_crt.c -> various things
- top fo file: helper structure added near old zeroize removed
- documentation of find_parent_in()'s signature: improved on one side,
added arguments on the other side
- documentation of find_parent()'s signature: same as above
- verify_chain(): variables initialised later to give compiler an
opportunity to warn us if not initialised on a code path
- find_parent(): funcion structure completely changed, for some reason git
tried to insert a paragraph of the old structure...
- merge_flags_with_cb(): data structure changed, one line was fixed with a
cast to keep MSVC happy, this cast is already in the new version
- in verify_restratable(): adjacent independent changes (function
signature on one line, variable type on the next)
programs/ssl/ssl_client2.c:
- testing for IN_PROGRESS return code near idle() (event-driven):
don't wait for data in the the socket if ECP_IN_PROGRESS
tests/data_files/Makefile: adjacent independent additions
tests/suites/test_suite_ecdsa.data: adjacent independent additions
tests/suites/test_suite_x509parse.data: adjacent independent additions
* development: (1059 commits)
Change symlink to hardlink to avoid permission issues
Fix out-of-tree testing symlinks on Windows
Updated version number to 2.10.0 for release
Add a disabled CMAC define in the no-entropy configuration
Adapt the ARIA test cases for new ECB function
Fix file permissions for ssl.h
Add ChangeLog entry for PR#1651
Fix MicroBlaze register typo.
Fix typo in doc and copy missing warning
Fix edit mistake in cipher_wrap.c
Update CTR doc for the 64-bit block cipher
Update CTR doc for other 128-bit block ciphers
Slightly tune ARIA CTR documentation
Remove double declaration of mbedtls_ssl_list_ciphersuites
Update CTR documentation
Use zeroize function from new platform_util
Move to new header style for ALT implementations
Add ifdef for selftest in header file
Fix typo in comments
Use more appropriate type for local variable
...
* development: (97 commits)
Updated version number to 2.10.0 for release
Add a disabled CMAC define in the no-entropy configuration
Adapt the ARIA test cases for new ECB function
Fix file permissions for ssl.h
Add ChangeLog entry for PR#1651
Fix MicroBlaze register typo.
Fix typo in doc and copy missing warning
Fix edit mistake in cipher_wrap.c
Update CTR doc for the 64-bit block cipher
Update CTR doc for other 128-bit block ciphers
Slightly tune ARIA CTR documentation
Remove double declaration of mbedtls_ssl_list_ciphersuites
Update CTR documentation
Use zeroize function from new platform_util
Move to new header style for ALT implementations
Add ifdef for selftest in header file
Fix typo in comments
Use more appropriate type for local variable
Remove useless parameter from function
Wipe sensitive info from the stack
...
- in x509_profile_check_pk_alg
- in x509_profile_check_md_alg
- in x509_profile_check_key
and in ssl_cli.c : unsigned char gets promoted to signed integer
* development: (504 commits)
Fix minor code style issues
Add the uodate to the soversion to the ChangeLog
Fix the ChangeLog for clarity, english and credit
Update version to 2.9.0
ecp: Fix binary compatibility with group ID
Changelog entry
Change accepted ciphersuite versions when parsing server hello
Remove preprocessor directives around platform_util.h include
Fix style for mbedtls_mpi_zeroize()
Improve mbedtls_platform_zeroize() docs
mbedtls_zeroize -> mbedtls_platform_zeroize in docs
Reword config.h docs for MBEDTLS_PLATFORM_ZEROIZE_ALT
Organize CMakeLists targets in alphabetical order
Organize output objs in alfabetical order in Makefile
Regenerate errors after ecp.h updates
Update ecp.h
Change variable bytes_written to header_bytes in record decompression
Update ecp.h
Update ecp.h
Update ecp.h
...
Add the `MBEDTLS_SELF_TEST` precompilation surrounding the self test functions,
which were missing this check in the header files. ( most of the header files were missing this check).
Addresses issue #971
Conflict resolution:
* ChangeLog: put the new entry from my branch in the proper place.
* include/mbedtls/error.h: counted high-level module error codes again.
* include/mbedtls/ssl.h: picked different numeric codes for the
concurrently added errors; made the new error a full sentence per
current standards.
* library/error.c: ran scripts/generate_errors.pl.
* library/ssl_srv.c:
* ssl_prepare_server_key_exchange "DHE key exchanges": the conflict
was due to style corrections in development
(4cb1f4d49c) which I merged with
my refactoring.
* ssl_prepare_server_key_exchange "For key exchanges involving the
server signing", first case, variable declarations: merged line
by line:
* dig_signed_len: added in async
* signature_len: removed in async
* hashlen: type changed to size_t in development
* hash: size changed to MBEDTLS_MD_MAX_SIZE in async
* ret: added in async
* ssl_prepare_server_key_exchange "For key exchanges involving the
server signing", first cae comment: the conflict was due to style
corrections in development (4cb1f4d49c)
which I merged with my comment changes made as part of refactoring
the function.
* ssl_prepare_server_key_exchange "Compute the hash to be signed" if
`md_alg != MBEDTLS_MD_NONE`: conflict between
ebd652fe2d
"ssl_write_server_key_exchange: calculate hashlen explicitly" and
46f5a3e9b4 "Check return codes from
MD in ssl code". I took the code from commit
ca1d742904 made on top of development
which makes mbedtls_ssl_get_key_exchange_md_ssl_tls return the
hash length.
* programs/ssl/ssl_server2.c: multiple conflicts between the introduction
of MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS and new auxiliary functions and
definitions for async support, and the introduction of idle().
* definitions before main: concurrent additions, kept both.
* main, just after `handshake:`: in the loop around
mbedtls_ssl_handshake(), merge the addition of support for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS and SSL_ASYNC_INJECT_ERROR_CANCEL
with the addition of the idle() call.
* main, if `opt.transport == MBEDTLS_SSL_TRANSPORT_STREAM`: take the
code from development and add a check for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS.
* main, loop around mbedtls_ssl_read() in the datagram case:
take the code from development and add a check for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS; revert to a do...while loop.
* main, loop around mbedtls_ssl_write() in the datagram case:
take the code from development and add a check for
MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS; revert to a do...while loop.
The cryptographic API should not be related to whether or not
there is alternative implementation. The API should be same for regular
implementation, and for alternative implementation, so it is defined
outside of the XXX_ALT precompilation check in the cryptographic API header
Conflict resolution:
* ChangeLog
* tests/data_files/Makefile: concurrent additions, order irrelevant
* tests/data_files/test-ca.opensslconf: concurrent additions, order irrelevant
* tests/scripts/all.sh: one comment change conflicted with a code
addition. In addition some of the additions in the
iotssl-1381-x509-verify-refactor-restricted branch need support for
keep-going mode, this will be added in a subsequent commit.
The relevant ASN.1 definitions for a PKCS#8 encoded Elliptic Curve key are:
PrivateKeyInfo ::= SEQUENCE {
version Version,
privateKeyAlgorithm PrivateKeyAlgorithmIdentifier,
privateKey PrivateKey,
attributes [0] IMPLICIT Attributes OPTIONAL
}
AlgorithmIdentifier ::= SEQUENCE {
algorithm OBJECT IDENTIFIER,
parameters ANY DEFINED BY algorithm OPTIONAL
}
ECParameters ::= CHOICE {
namedCurve OBJECT IDENTIFIER
-- implicitCurve NULL
-- specifiedCurve SpecifiedECDomain
}
ECPrivateKey ::= SEQUENCE {
version INTEGER { ecPrivkeyVer1(1) } (ecPrivkeyVer1),
privateKey OCTET STRING,
parameters [0] ECParameters {{ NamedCurve }} OPTIONAL,
publicKey [1] BIT STRING OPTIONAL
}
Because of the two optional fields, there are 4 possible variants that need to
be parsed: no optional fields, only parameters, only public key, and both
optional fields. Previously mbedTLS was unable to parse keys with "only
parameters". Also, only "only public key" was tested. There was a test for "no
optional fields", but it was labelled incorrectly as SEC.1 and not run because
of a great renaming mixup.
The change in the truncated HMAC extension aligns Mbed TLS with the
standard, but breaks interoperability with previous versions. Indicate
this in the ChangeLog, as well as how to restore the old behavior.
Add missing MBEDTLS_DEPRECATED_REMOVED guards around the definitions
of mbedtls_aes_decrypt and mbedtls_aes_encrypt.
This fixes the build under -Wmissing-prototypes -Werror.
Fixes#1388
Conflict: configs/config-picocoin.h was both edited and removed.
Resolution: removed, since this is the whole point of PR #1280 and the
changes in development are no longer relevant.
Currently only SHA1 is supported as PRF algorithm for PBKDF2
(PKCS#5 v2.0).
This means that keys encrypted and authenticated using
another algorithm of the SHA family cannot be decrypted.
This deficiency has become particularly incumbent now that
PKIs created with OpenSSL1.1 are encrypting keys using
hmacSHA256 by default (OpenSSL1.0 used PKCS#5 v1.0 by default
and even if v2 was forced, it would still use hmacSHA1).
Enable support for all the digest algorithms of the SHA
family for PKCS#5 v2.0.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
A new test for mbedtls_timing_alarm(0) was introduced in PR 1136, which also
fixed it on Unix. Apparently test results on MinGW were not checked at that
point, so we missed that this new test was also failing on this platform.
Add MBEDTLS_ERR_XXX_HW_ACCEL_FAILED error codes for all cryptography
modules where the software implementation can be replaced by a hardware
implementation.
This does not include the individual message digest modules since they
currently have no way to return error codes.
This does include the higher-level md, cipher and pk modules since
alternative implementations and even algorithms can be plugged in at
runtime.
This commit allows users to provide alternative implementations of the
ECJPAKE interface through the configuration option MBEDTLS_ECJPAKE_ALT.
When set, the user must add `ecjpake_alt.h` declaring the same
interface as `ecjpake.h`, as well as add some compilation unit which
implements the functionality. This is in line with the preexisting
support for alternative implementations of other modules.
The corner cases fixed include:
* Allocating a buffer of size 0. With this change, the allocator now
returns a NULL pointer in this case. Note that changes in pem.c and
x509_crl.c were required to fix tests that did not work under this
assumption.
* Initialising the allocator with less memory than required for headers.
* Fix header chain checks for uninitialised allocator.
Use the updated names for the new functions (xxx_ret instead of xxx_ext).
List the new deprecations in the appropriate sections.
Credit the independent report of the misuse of zeroizing to reset a
hash context in entropy.c.
Conflict resolution:
* ChangeLog: put the new entries in their rightful place.
* library/x509write_crt.c: the change in development was whitespace
only, so use the one from the iotssl-1251 feature branch.
Edit the CMAC_ALT ChangeLog entry to mention CCM_ALT which was added
in a sister PR and is being merged together.
Use full name rather than Github id as attribution.
Move the entry under "Features" for better consistency with historical
practice.
Conflict resolution: additions in the same places as
upstream-public/pr/865, both adding into lexicographically sorted
lists, resolved by taking the additions in lexicographic order.
* development:
Timing self test: shorten redundant tests
Timing self test: increased duration
Timing self test: increased tolerance
Timing unit tests: more protection against infinite loops
Unit test for mbedtls_timing_hardclock
New timing unit tests
selftest: allow excluding a subset of the tests
selftest: allow running a subset of the tests
selftest: refactor to separate the list of tests from the logic
Timing self test: print some diagnosis information
mbedtls_timing_get_timer: don't use uninitialized memory
timing interface documentation: minor clarifications
Timing: fix mbedtls_set_alarm(0) on Unix/POSIX
* public/pr/1136:
Timing self test: shorten redundant tests
Timing self test: increased duration
Timing self test: increased tolerance
Timing unit tests: more protection against infinite loops
Unit test for mbedtls_timing_hardclock
New timing unit tests
selftest: allow excluding a subset of the tests
selftest: allow running a subset of the tests
selftest: refactor to separate the list of tests from the logic
Timing self test: print some diagnosis information
mbedtls_timing_get_timer: don't use uninitialized memory
timing interface documentation: minor clarifications
Timing: fix mbedtls_set_alarm(0) on Unix/POSIX
* Correct order of sections in ChangeLog
* Restore unintentionally removed whitespace and
formatting improvements.
* Consistently rename MBEDTLS_ERR_RSA_EXPORT_UNSUPPORTED
to MBEDTLS_ERR_RSA_UNSUPPORTED_OPERATION in rsa.h
documentation.
1. Surround the generate keys with
`#if ! defined(MBEDTLS_CMAC_ALT) || defined(MBEDTLS_SELF_TEST)`
to resolve build issue when `MBEDTLS_SELF_TEST` is defined for
alternative CMAC as well
2. Update ChangeLog
Increase the duration of the self test, otherwise it tends to fail on
a busy machine even with the recently upped tolerance. But run the
loop only once, it's enough for a simple smoke test.
New set of unit tests for the timing module, instead of just running
the selftest function.
The selftest function sometimes fails on a heavily loaded
machine (such as a typical continuous integration system). Because of
the all-in-one nature of the test and because the exact load pattern
can be hard to reproduce, it is difficult to diagnose failures of CI
runs with selftest. The new tests are more separated and I strove to
point out potential failure modes in comments.
* mbedtls_timing_hardclock: not tested. This function gives so few
guarantees that there isn't much to test, and it is hard to test
reliably because clock cycles don't easily relate to time in any
remotely portable way. This function isn't used in the library
anyway, it's only there for benchmark programs.
* mbedtls_timing_get_timer: tested by setting a timer and verifying
that it reaches its target, and by verifying that a timer started
later than another always has a smaller elapsed time.
* mbedtls_set_alarm: tested by setting an alarm, busy-waiting for it
and measuring the elapsed time with a timer.
* mbedtls_timing_set_delay, mbedtls_timing_get_delay: tested by
setting a delay object and watching it go through its two delay
values, using a timer to check that the delays are passed at the
expected time.
The tests pass under light to moderate load, but some of them can be
defeated with sufficiently heavy load. This is unavoidable since the
test process to be effectively suspended for any length of time,
making us think that a timer has gone on for too long.
mbedtls_timing_get_timer with reset=1 is called both to initialize a
timer object and to reset an already-initialized object. In an
initial call, the content of the data structure is indeterminate, so
the code should not read from it. This could crash if signed overflows
trap, for example.
As a consequence, on reset, we can't return the previously elapsed
time as was previously done on Windows. Return 0 as was done on Unix.
The POSIX/Unix implementation of mbedtls_set_alarm did not set the
mbedtls_timing_alarmed flag when called with 0, which was inconsistent
with what the documentation implied and with the Windows behavior.
* restricted/pr/403:
Correct record header size in case of TLS
Don't allocate space for DTLS header if DTLS is disabled
Improve debugging output
Adapt ChangeLog
Add run-time check for handshake message size in ssl_write_record
Add run-time check for record content size in ssl_encrypt_buf
Add compile-time checks for size of record content and payload
* development:
Don't split error code description across multiple lines
Register new error code in error.h
Move deprecation to separate section in ChangeLog
Extend scope of ERR_RSA_UNSUPPORTED_OPERATION error code
Adapt RSA test suite
Adapt ChangeLog
Deprecate usage of RSA primitives with wrong key type
* restricted/pr/397:
Don't split error code description across multiple lines
Register new error code in error.h
Move deprecation to separate section in ChangeLog
Extend scope of ERR_RSA_UNSUPPORTED_OPERATION error code
Adapt RSA test suite
Adapt ChangeLog
Deprecate usage of RSA primitives with wrong key type
