Run tests with middlebox compatibility enabled but tests
dedicated to middlebox compatibility disabled.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add dependencies on built-in hash of signature/
signature verification and asymmetric
encryption/decryption tests. The dependency is
not added for tests based on SHA-256 as SHA-256
is always present when PSA is involved (necessary
to the PSA core) and that way most of PSA signature
/verification tests are still run when PSA hash
operations are accelerated.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
As PSA signatures rely on built-in hash implementations
(cannot take an advantage of an accelerator for the
time being), chose an available built-in hash for
tests exercising a signature key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add ECDSA and RSA signature acceleration testing
with signature capabilitites removed from the
Mbed TLS library.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The current testing of the PSA configuration is
based on test code located in the library itself.
Remove this code as we are moving to using a
test library instead.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This commit removes the test_psa_crypto_config_basic
all.sh component that can no longer work without
adapting it to the separately compiled test driver
library. This component is replaced by several
components in the following commits to test various
type of acceleration independently.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
PR #3959 has proven that by adding a prefix
(LIBTESTDRIVER1/libtestdriver1_ in this commit) to
all MBEDTLS/PSA_* and mbedtls/psa_* symbols of a copy
of the Mbed TLS library, we can build a library that
can be linked with the Mbed TLS library.
This commit leverages this to build a PSA test driver
library based on the Mbed TLS library code.
The cryptographic features supported by the test
library are defined by:
. a minimal configuration (in the sense of config.h),
see config_test_driver.h
. PSA_WANT_* and PSA_ACCEL_* defined macros.
The PSA_WANT_* macros have to be the same as the ones
used to build the Mbed TLS library the test driver
library is supposed to be linked to as the PSA_WANT_*
macros are used in the definition of structures and
macros that are shared by the PSA crypto core,
Mbed TLS drivers and the driver test library.
The PSA_ACCEL_* macros are intended to define the
cryptographic features that have to be removed
from the Mbed TLS library and thus supported by the
test library in test scenarios. The PSA_ACCEL_* macros
to build the test library are thus mirrored from the
ones to build the Mbed TLS library by extended the
crypto_config.h: see
crypto_config_test_driver_entension.h.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rename test driver entry points to
libtestdriver1_<name of the Mbed TLS entry point>.
This aligns with the renaming of all Mbed TLS APIs
for the test driver library (that will be put in place
in the following commits) to avoid name conflicts
when linking it with the Mbed TLS library.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of the driver test entry points to be
provided by a test driver library, move their prototypes
to tests directory.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Define test driver entry points that provide an alternative
to Mbed TLS driver entry points only when the PSA configuration
is used. Their purpose is only to test the PSA configuration
thus there is no good reason to use them out of this scope.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Align RSA/ECP sign/verify hash dispatch with the
corresponding code of the library. The library
code was modified recently but not the test code
one and these modifications ease the following work.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add non regression test for invalid usage of
the output buffer in psa_cipher_encrypt().
The output buffer should not be used to pass
the IV to the driver as a local attacker could
be able to control the used IV.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add non regression test for invalid usage of
the output buffer in psa_cipher_generate_iv().
The output buffer should not be used to pass
the IV to the driver as a local attacker could
be able to control the used IV.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Empty the current line if it's entirely inside a comment.
Don't incorrectly end a block comment at the second line if it doesn't
contain `*/`.
Recognize `/*` to start a multiline comment even if it isn't at the start of
the line.
When stripping off comments, consistently strip off `/*` and `*/`.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Use '|'.join([comma-separated list]) rather than r'...|' r'...|'. This way
there's less risk of forgetting a '|'. Pylint will yell if we forget a comma
between list elements.
Use match rather than search + mandatory start anchor for EXCLUSION_LINES.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Make parse_identifiers less complex. Pylint was complaining that it had too
many local variables, and it had a point.
* Lift the constants identifier_regex and exclusion_lines to class
constants (renamed to uppercase because they're constants).
* Lift the per-file loop into a new function parse_identifiers_in_file.
No intended behavior change.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix cases like
```
/*short comment*/ /*long
comment */
int mbedtls_foo;
```
where the previous code thought that the second line started outside of a
comment and ended inside of a comment.
I believe that the new code strips comments correctly. It also strips string
literals, just in case.
Fixes#5191.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Running the out of source CMake test on Ubuntu 16.04 using more than one
processor (as the CI does) can create a race condition whereby the build
fails to see a generated file, despite that file actually having been
generated. This problem appears to go away with 18.04 or newer, so make
the out of source tests not supported on Ubuntu 16.04
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Under gcc11(+) both message and received would cause errors for
potentially being used uninitialised. We fixed many of these issues in
another PR, but this one is only seen under certain configs.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Remove useless component in all.sh
Remove use server logs in ssh-opt.sh
Remove useless guards in ssl_client2.c
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Change client test code to support rsa pss signatures
Add test cases for rsa pss signature in ssl-opt.sh
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Remove client certificate verify in tests.
Change the layout of structure to fix abi_api check issues.
Add comments of Finished.
Align with the coding styles.
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Non-regression for the fix in https://github.com/ARMmbed/mbedtls/pull/5126:
libmbedtls and libmbedx509 did not declare their dependencies on libmbedx509
and libmbedcrypto when built with make.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Change debug messag for server finished.
Change name of generate_application_keys.
Remove the client vertificate tests from ssl-opt.sh.
Add test strings for server finished in ssl-opt.sh.
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
The new fork was rebased on top of the upstream master, removing the
need for most of the downstream patches we carried.
On the other hand, the new fork includes a couple of fixes to problems
that were not addressed by the original fork, or were introduced with the
new version of psa-arch-tests.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
At least twice, we added a classification flag but forgot to test it in the
relevant test functions. Add some protection so that this doesn't happen
again. In each classification category, put a macro xxx_FLAG_MASK_PLUS_ONE
at the end. In the corresponding test function, keep track of the flags that
are tested, and check that their mask is xxx_FLAG_MASK_PLUS_ONE - 1 which is
all the bits of the previous flags set.
Now, if we add a flag without testing it, the test
TEST_EQUAL( classification_flags_tested, xxx_FLAG_MASK_PLUS_ONE - 1 )
will fail. It will also fail if we make the set of flag numbers
non-consecutive, which is ok.
This reveals that three algorithm flags had been added but not tested (in
two separate occasions). Also, one key type flag that is no longer used by
the library was still defined but not tested, which is not a test gap but is
inconsistent. It's for DSA, which is relevant to the PSA encoding even if
Mbed TLS doesn't implement it, so keep the flag and do test it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The status of signature wildcards with respect to PSA_ALG_IS_HASH_AND_SIGN
is unclear in the specification. A wildcard is usually instantiated with a
specific hash, making the implementation hash-and-sign, but it could also be
instantiated with a non-hash-and-sign algorithm. For the time being, go with
what's currently implemented, which is that they are considered
hash-and-sign.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The current definition of PSA_ALG_IS_HASH_AND_SIGN includes
PSA_ALG_RSA_PKCS1V15_SIGN_RAW and PSA_ALG_ECDSA_ANY, which don't strictly
follow the hash-and-sign paradigm: the algorithm does not encode a hash
algorithm that is applied prior to the signature step. The definition in
fact encompasses what can be used with psa_sign_hash/psa_verify_hash, so
it's the correct definition for PSA_ALG_IS_SIGN_HASH. Therefore this commit
moves definition of PSA_ALG_IS_HASH_AND_SIGN to PSA_ALG_IS_SIGN_HASH, and
replace the definition of PSA_ALG_IS_HASH_AND_SIGN by a correct one (based
on PSA_ALG_IS_SIGN_HASH, excluding the algorithms where the pre-signature
step isn't to apply the hash encoded in the algorithm).
In the definition of PSA_ALG_SIGN_GET_HASH, keep the condition for a nonzero
output to be PSA_ALG_IS_HASH_AND_SIGN.
Everywhere else in the code base (definition of PSA_ALG_IS_SIGN_MESSAGE, and
every use of PSA_ALG_IS_HASH_AND_SIGN outside of crypto_values.h), we meant
PSA_ALG_IS_SIGN_HASH where we wrote PSA_ALG_IS_HASH_AND_SIGN, so do a
global replacement.
```
git grep -l IS_HASH_AND_SIGN ':!include/psa/crypto_values.h' | xargs perl -i -pe 's/ALG_IS_HASH_AND_SIGN/ALG_IS_SIGN_HASH/g'
```
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Only tested for algorithms for which we support HMAC, since that's all we
use PSA_HASH_BLOCK_LENGTH for at the moment.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It was unmaintained and untested, and the fear of breaking it was holding us
back. Resolves#4934.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
digits is also a local variable in host_test.function, leading to compilers
complaining about that shadowing the global variable in
test_suite_base64.function.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is part of the definition of the encoding, not a choice of test
parameter, so keep it with the test code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add unit tests for mask_of_range(), enc_char() and dec_value().
When constant-flow testing is enabled, verify that these functions are
constant-flow.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The Makefiles already assume that filenames don't contain
special characters anyway, so we don't need to check this
in generate_psa_tests.py.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Change one occurrence of ${PYTHON} to ${MBEDTLS_PYTHON_EXECUTABLE}
and add implied ${MBEDTLS_PYTHON_EXECUTABLE} to the start of a
different command.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Explain that the output filename is derived from the -d
argument, so that it's obvious why the CMakefile code
does what it does.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
When DEV_MODE=OFF, link_to_source() was being called with
a full path in the build directory, rather than just a base
name starting at "suites/" as was intended. Fix this by
generating a list of base names and using that for
link_to_source(), then deriving full paths afterwards.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Remove a hardcoded list of tests that use generated
".data" files, and instead derive this list from the existing
list of test files (created using generate_psa_tests.py).
This reduces the maintenance burden as only the list
in generate_psa_tests.py needs to be updated.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Use the generate_psa_tests.py script to generate the list
of test data files used as output files by cmake.
Do this by introducing a new option --list-for-cmake
that prints a semicolon-separated list of the data files
with no terminating newline (since this is how a cmake list
is represented).
Replace the hard-coded output file list with a variable
generated by the script using this option.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Unrelated to other commits in this PR, except when running manual tests
I kept noticing these files where left over.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
When the option is On, CMake will have rules to generate the generated
files using scripts etc. When the option is Off, CMake will assume the
files are available from the source tree; in that mode, it won't require
any extra tools (Perl for example) compared to when we committed the
files to git.
The intention is that users will never need to adjust this option:
- in the development branch (and features branches etc.) the option is
always On (development mode);
- in released tarballs, which include the generated files, we'll switch
the option to Off (release mode) in the same commit that re-adds the
generated files.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
