Switch pkparse to use new mbedtls_pkcs12_pbe_ext function
and deprecate mbedtls_pkcs12_pbe function.
Signed-off-by: Waleed Elmelegy <waleed.elmelegy@arm.com>
Return back to modifying input parameters in pkcs12_parse_pbe_params
to avoid change in behaviour.
Signed-off-by: Waleed Elmelegy <waleed.elmelegy@arm.com>
Add new mbedtls_pkcs12_pbe_ext function to replace
old mbedtls_pkcs12_pbe function that have security
issues.
Signed-off-by: Waleed Elmelegy <waleed.elmelegy@arm.com>
* Prevent pkcs12_pbe encryption when PKCS7 padding has been
disabled since this not part of the specs.
* Allow decryption when PKCS7 padding is disabled for legacy
reasons, However, invalid padding is not checked.
* Document new behaviour, known limitations and possible
security concerns.
* Add tests to check these scenarios. Test data has been
generated by the below code using OpenSSL as a reference:
#include <openssl/pkcs12.h>
#include <openssl/evp.h>
#include <openssl/des.h>
#include <openssl/asn1.h>
#include "crypto/asn1.h"
#include <string.h>
int main()
{
char pass[] = "\xBB\xBB\xBB\xBB\xBB\xBB\xBB\xBB\xBB";
unsigned char salt[] = "\xCC\xCC\xCC\xCC\xCC\xCC\xCC\xCC\xCC";
unsigned char plaintext[] = "\xAA\xAA\xAA\xAA\xAA\xAA\xAA\xAA";
unsigned char *ciphertext = NULL;
int iter = 10;
X509_ALGOR *alg = X509_ALGOR_new();
int ciphertext_len = 0;
int alg_nid = NID_pbe_WithSHA1And3_Key_TripleDES_CBC;
alg->parameter = ASN1_TYPE_new();
struct asn1_object_st * aobj;
PKCS5_pbe_set0_algor(alg, alg_nid, iter,
salt, sizeof(salt)-1);
aobj = alg->algorithm;
printf("\"30%.2X", 2 + aobj->length + alg->parameter->value.asn1_string->length);
printf("06%.2X", aobj->length);
for (int i = 0; i < aobj->length; i++) {
printf("%.2X", aobj->data[i]);
}
for (int i = 0; i < alg->parameter->value.asn1_string->length; i++) {
printf("%.2X", alg->parameter->value.asn1_string->data[i]);
}
printf("\":\"");
for (int i = 0; i < sizeof(pass)-1; i++) {
printf("%.2X", pass[i] & 0xFF);
}
printf("\":\"");
for (int i = 0; i < sizeof(plaintext)-1; i++) {
printf("%.2X", plaintext[i]);
}
printf("\":");
printf("0");
printf(":\"");
unsigned char * res = PKCS12_pbe_crypt(alg, pass, sizeof(pass)-1, plaintext, sizeof(plaintext)-1, &ciphertext, &ciphertext_len, 1);
if (res == NULL)
printf("Encryption failed!\n");
for (int i = 0; i < ciphertext_len; i++) {
printf("%.2X", res[i]);
}
printf("\"\n");
return 0;
}
Signed-off-by: Waleed Elmelegy <waleed.elmelegy@arm.com>
#
As a public header, it should no longer include common.h, just use
build_info.h which is what we actually need anyway.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Initializing return status variables to CORRUPTION_DETECTED is a second line
of defense in library code in case there's a code path where we forget to
assign to the variable. This isn't useful in test code. In any case, here,
we might as well define the variable at the point of use.
This fixes a build error in configurations with MBEDTLS_ERROR_C and
MBEDTLS_PSA_CRYPTO_C both disabled, because then mbedtls/error.h isn't
included so MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED isn't defined.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Expected output generated by OpenSSL (see below) apart from the case
where both password and salt are either NULL or zero length, as OpenSSL
does not support this. For these test cases we have had to use our own
output as that which is expected. Code to generate test cases is as
follows:
#include <openssl/pkcs12.h>
#include <openssl/evp.h>
#include <string.h>
int Keygen_Uni( const char * test_name, unsigned char *pass, int
passlen, unsigned char *salt,
int saltlen, int id, int iter, int n,
unsigned char *out, const EVP_MD
*md_type )
{
size_t index;
printf( "%s\n", test_name );
int ret = PKCS12_key_gen_uni( pass, passlen, salt, saltlen, id, iter,
n, out, md_type );
if( ret != 1 )
{
printf( "Key generation returned %d\n", ret );
}
else
{
for( index = 0; index < n; ++index )
{
printf( "%02x", out[index] );
}
printf( "\n" );
}
printf( "\n" );
}
int main(void)
{
unsigned char out_buf[48];
unsigned char pass[64];
int pass_len;
unsigned char salt[64];
int salt_len;
/* If ID=1, then the pseudorandom bits being produced are to be used
as key material for performing encryption or decryption.
If ID=2, then the pseudorandom bits being produced are to be
used as an IV (Initial Value) for encryption or decryption.
If ID=3, then the pseudorandom bits being produced are
to be used as an integrity key for MACing.
*/
int id = 1;
int iter = 3;
memset( out_buf, 0, sizeof( out_buf ) );
memset( pass, 0, sizeof( pass ) );
memset( salt, 0, sizeof( salt ) );
Keygen_Uni( "Zero length pass and salt", pass, 0, salt, 0, id, iter,
sizeof(out_buf),
out_buf, EVP_md5( ) );
memset( out_buf, 0, sizeof( out_buf ) );
Keygen_Uni( "NULL pass and salt", NULL, 0, NULL, 0, id, iter,
sizeof(out_buf),
out_buf, EVP_md5( ) );
memset( out_buf, 0, sizeof( out_buf ) );
salt[0] = 0x01;
salt[1] = 0x23;
salt[2] = 0x45;
salt[3] = 0x67;
salt[4] = 0x89;
salt[5] = 0xab;
salt[6] = 0xcd;
salt[7] = 0xef;
Keygen_Uni( "Zero length pass", pass, 0, salt, 8, id, iter,
sizeof(out_buf),
out_buf, EVP_md5( ) );
memset( out_buf, 0, sizeof( out_buf ) );
Keygen_Uni( "NULL pass", NULL, 0, salt, 8, id, iter, sizeof(out_buf),
out_buf, EVP_md5( ) );
memset( out_buf, 0, sizeof( out_buf ) );
memset( salt, 0, sizeof( salt ) );
pass[0] = 0x01;
pass[1] = 0x23;
pass[2] = 0x45;
pass[3] = 0x67;
pass[4] = 0x89;
pass[5] = 0xab;
pass[6] = 0xcd;
pass[7] = 0xef;
Keygen_Uni( "Zero length salt", pass, 8, salt, 0, id, iter,
sizeof(out_buf),
out_buf, EVP_md5( ) );
memset( out_buf, 0, sizeof( out_buf ) );
Keygen_Uni( "NULL salt", pass, 8, NULL, 0, id, iter, sizeof(out_buf),
out_buf, EVP_md5( ) );
memset( out_buf, 0, sizeof( out_buf ) );
salt[0] = 0x01;
salt[1] = 0x23;
salt[2] = 0x45;
salt[3] = 0x67;
salt[4] = 0x89;
salt[5] = 0xab;
salt[6] = 0xcd;
salt[7] = 0xef;
Keygen_Uni( "Valid pass and salt", pass, 8, salt, 8, id, iter,
sizeof(out_buf),
out_buf, EVP_md5( ) );
return 0;
}
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
