* origin/development:
Update the crypto submodule
Use multipart PSA key derivation API
platform: Include stdarg.h where needed
Update Mbed Crypto to contain mbed-crypto#152
CMake: Add a subdirectory build regression test
README: Enable builds as a CMake subproject
ChangeLog: Enable builds as a CMake subproject
Remove use of CMAKE_SOURCE_DIR
Update library version to 2.18.0
* origin/pr/2807:
platform: Include stdarg.h where needed
Update Mbed Crypto to contain mbed-crypto#152
CMake: Add a subdirectory build regression test
README: Enable builds as a CMake subproject
ChangeLog: Enable builds as a CMake subproject
Remove use of CMAKE_SOURCE_DIR
Update library version to 2.18.0
Avoid compiler errors when MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER
is set by using the application ID type.
[Error] psa_crypto_slot_management.c@175,9: used type 'psa_key_id_t' (aka 'psa_key_file_id_t') where arithmetic or pointer type is required
Bring Mbed TLS 2.18.0 and 2.18.1 release changes back into the
development branch. We had branched to release 2.18.0 and 2.18.1 in
order to allow those releases to go out without having to block work on
the `development` branch.
Manually resolve conflicts in the Changelog by moving all freshly addded
changes to a new, unreleased version entry.
Reject changes to include/mbedtls/platform.h made in the mbedtls-2.18
branch, as that file is now sourced from Mbed Crypto.
* mbedtls-2.18:
platform: Include stdarg.h where needed
Update Mbed Crypto to contain mbed-crypto#152
CMake: Add a subdirectory build regression test
README: Enable builds as a CMake subproject
ChangeLog: Enable builds as a CMake subproject
Remove use of CMAKE_SOURCE_DIR
Update library version to 2.18.0
* origin/development: (114 commits)
Don't redefine calloc and free
Add changelog entry to record checking
Fix compiler warning
Add debug messages
Remove duplicate entries from ChangeLog
Fix parameter name in doxygen
Add missing guards for mac usage
Improve reability and debugability of large if
Fix a typo in a comment
Fix MSVC warning
Fix compile error in reduced configurations
Avoid duplication of session format header
Implement config-checking header to context s11n
Provide serialisation API only if it's enabled
Fix compiler warning: comparing signed to unsigned
Actually reset the context on save as advertised
Re-use buffer allocated by handshake_init()
Enable serialisation tests in ssl-opt.sh
Change requirements for setting timer callback
Add setting of forced fields when deserializing
...
Breaking into a series of statements makes things easier when stepping through
the code in a debugger.
Previous comments we stating the opposite or what the code tested for (what we
want vs what we're erroring out on) which was confusing.
Also expand a bit on the reasons for these restrictions.
Modelled after the config-checking header from session s11n.
The list of relevant config flags was established by manually checking the
fields serialized in the format, and which config.h flags they depend on.
This probably deserves double-checking by reviewers.
Since the type of cid_len is unsigned but shorter than int, it gets
"promoted" to int (which is also the type of the result), unless we make the
other operand an unsigned int which then forces the expression to unsigned int
as well.
The number of meaning of the flags will be determined later, when handling the
relevant struct members. For now three bytes are reserved as an example, but
this number may change later.
This mainly follows the design document (saving all fields marked "saved" in
the main structure and the transform sub-structure) with two exceptions:
- things related to renegotiation are excluded here (there weren't quite in
the design document as the possibility of allowing renegotiation was still
on the table, which is no longer is) - also, ssl.secure_renegotiation (which
is not guarded by MBEDTLS_SSL_RENEGOTIATION because it's used in initial
handshakes even with renegotiation disabled) is still excluded, as we don't
need it after the handshake.
- things related to Connection ID are added, as they weren't present at the
time the design document was written.
The exact format of the header (value of the bitflag indicating compile-time
options, whether and how to merge it with the serialized session header) will
be determined later.
Enforce restrictions indicated in the documentation.
This allows to make some simplifying assumptions (no need to worry about
saving IVs for CBC in TLS < 1.1, nor about saving handshake data) and
guarantees that all values marked as "forced" in the design document have the
intended values and can be skipped when serialising.
Some of the "forced" values are not checked because their value is a
consequence of other checks (for example, session_negotiated == NULL outside
handshakes). We do however check that session and transform are not NULL (even
if that's also a consequence of the initial handshake being over) as we're
going to dereference them and static analyzers may appreciate the info.
This is enabled by default as we generally enable things by default unless
there's a reason not to (experimental, deprecated, security risk).
We need a compile-time option because, even though the functions themselves
can be easily garbage-collected by the linker, implementing them will require
saving 64 bytes of Client/ServerHello.random values after the handshake, that
would otherwise not be needed, and people who don't need this feature
shouldn't have to pay the price of increased RAM usage.
This commit introduces a new SSL error code
`MBEDTLS_ERR_SSL_VERSION_MISMATCH`
which can be used to indicate operation failure due to a
mismatch of version or configuration.
It is put to use in the implementation of `mbedtls_ssl_session_load()`
to signal the attempt to de-serialize a session which has been serialized
in a build of Mbed TLS using a different version or configuration.
This commit makes use of the added space in the session header to
encode the state of those parts of the compile-time configuration
which influence the structure of the serialized session in the
present version of Mbed TLS. Specifically, these are
- the options which influence the presence/omission of fields
from mbedtls_ssl_session (which is currently shallow-copied
into the serialized session)
- the setting of MBEDTLS_X509_CRT_PARSE_C, which determines whether
the serialized session contains a CRT-length + CRT-value pair after
the shallow-copied mbedtls_ssl_session instance.
- the setting of MBEDTLS_SSL_SESSION_TICKETS, which determines whether
the serialized session contains a session ticket.
This commit adds space for two bytes in the header of serizlied
SSL sessions which can be used to determine the structure of the
remaining serialized session in the respective version of Mbed TLS.
Specifically, if parts of the session depend on whether specific
compile-time options are set or not, the setting of these options
can be encoded in the added space.
This commit doesn't yet make use of the fields.
The format of serialized SSL sessions depends on the version and the
configuration of Mbed TLS; attempts to restore sessions established
in different versions and/or configurations lead to undefined behaviour.
This commit adds an 3-byte version header to the serialized session
generated and cleanly fails ticket parsing in case a session from a
non-matching version of Mbed TLS is presented.
This bug was present since cert digest had been introduced, which highlights
the need for testing.
While at it, fix a bug in the comment explaining the format - this was
introduced by me copy-pasting to hastily from current baremetal, that has a
different format (see next PR in the series for the same in development).
We have explicit recommendations to use US spelling for technical writing, so
let's apply this to code as well for uniformity. (My fingers tend to prefer UK
spelling, so this needs to be fixed in many places.)
sed -i 's/\([Ss]eriali\)s/\1z/g' **/*.[ch] **/*.function **/*.data ChangeLog
This uncovered a bug that led to a double-free (in practice, in general could
be free() on any invalid value): initially the session structure is loaded
with `memcpy()` which copies the previous values of pointers peer_cert and
ticket to heap-allocated buffers (or any other value if the input is
attacker-controlled). Now if we exit before we got a chance to replace those
invalid values with valid ones (for example because the input buffer is too
small, or because the second malloc() failed), then the next call to
session_free() is going to call free() on invalid pointers.
This bug is fixed in this commit by always setting the pointers to NULL right
after they've been read from the serialised state, so that the invalid values
can never be used.
(An alternative would be to NULL-ify them when writing, which was rejected
mostly because we need to do it when reading anyway (as the consequences of
free(invalid) are too severe to take any risk), so doing it when writing as
well is redundant and a waste of code size.)
Also, while thinking about what happens in case of errors, it became apparent
to me that it was bad practice to leave the session structure in an
half-initialised state and rely on the caller to call session_free(), so this
commit also ensures we always clear the structure when loading failed.
This allows callers to discover what an appropriate size is. Otherwise they'd
have to either try repeatedly, or allocate an overly large buffer (or some
combination of those).
Adapt documentation an example usage in ssl_client2.
Avoid useless copy with mbedtls_ssl_get_session() before serialising.
Used in ssl_client2 for testing and demonstrating usage, but unfortunately
that means mbedtls_ssl_get_session() is no longer tested, which will be fixed
in the next commit.
On client side, this is required for the main use case where of serialising a
session for later resumption, in case tickets are used.
On server side, this doesn't change much as ticket_len will always be 0.
This unblocks testing the functions by using them in ssl_client2, which will
be done in the next commit.
This finishes making these functions public. Next step is to get them tested,
but there's currently a blocker for that, see next commit (and the commit
after it for tests).
While 'session hash' is currently unique, so suitable to prove that the
intended code path has been taken, it's a generic enough phrase that in the
future we might add other debug messages containing it in completely unrelated
code paths. In order to future-proof the accuracy of the test, let's use a
more specific string.
The previous comment used "TLS" as a shortcut for "TLS 1.0/1.1" which was
confusing. This partially reflected the names of the calc_verify/finished that
go ssl, tls (for 1.0/1.1) tls_shaxxx (for 1.2), but still it's clearer to be
explicit in the comment - and perhaps in the long term the function names
could be clarified instead.
When using this function to deserialize, it's not a problem to have a session
structure as input as we'll have one around anyway (most probably freshly
deserialised).
However for tests it's convenient to be able to build a transform without
having a session structure around.
Also, removing this structure from parameters makes the function signature
more uniform, the only exception left being the ssl param at the end that's
hard to avoid for now.
Configs with no DEBUG_C are used for example in test-ref-configs.pl, which also
runs parts of compat.sh or ssl-opt.sh on them, so the added 'ssl = NULL'
statements will be exercised in those tests at least.
Make it more explicit what's used. Unfortunately, we still need ssl as a
parameter for debugging, and because calc_verify wants it as a parameter (for
all TLS versions except SSL3 it would actually only need handshake, but SSL3
also accesses session_negotiate).
It's also because of calc_verify that we can't make it const yet, but see next
commit.
* origin/development: (51 commits)
Fix possibly-lossy conversion warning from MSVC
Reintroduce length 0 check for records
Don't use memcpy() for 2-byte copy operation
Remove integer parsing macro
Fix alignment in record header parsing routine
Don't disallow 'record from another epoch' log msg in proxy ref test
Make sure 'record from another epoch' is displayed for next epoch
Implement record checking API
Mark ssl_parse_record_header() as `const` in SSL context
Make mbedtls_ssl_in_hdr_len() CID-unaware
Remove duplicate setting of ssl->in_msgtype and ssl->in_msglen
Move update of in_xxx fields in ssl_get_next_record()
Move update of in_xxx fields outside of ssl_prepare_record_content()
Reduce dependency of ssl_prepare_record_content() on in_xxx fields
Move ssl_update_in_pointers() to after record hdr parsing
Mark DTLS replay check as `const` on the SSL context
Move updating the internal rec ptrs to outside of rec hdr parsing
Mark ssl_decrypt_buf() as `const in the input SSL context
Adapt ssl_prepare_record_content() to use SSL record structure
Use record length from record structure when fetching content in TLS
...
* origin/pr/2790: (40 commits)
Fix possibly-lossy conversion warning from MSVC
Reintroduce length 0 check for records
Don't use memcpy() for 2-byte copy operation
Remove integer parsing macro
Fix alignment in record header parsing routine
Don't disallow 'record from another epoch' log msg in proxy ref test
Make sure 'record from another epoch' is displayed for next epoch
Implement record checking API
Mark ssl_parse_record_header() as `const` in SSL context
Make mbedtls_ssl_in_hdr_len() CID-unaware
Remove duplicate setting of ssl->in_msgtype and ssl->in_msglen
Move update of in_xxx fields in ssl_get_next_record()
Move update of in_xxx fields outside of ssl_prepare_record_content()
Reduce dependency of ssl_prepare_record_content() on in_xxx fields
Move ssl_update_in_pointers() to after record hdr parsing
Mark DTLS replay check as `const` on the SSL context
Move updating the internal rec ptrs to outside of rec hdr parsing
Mark ssl_decrypt_buf() as `const in the input SSL context
Adapt ssl_prepare_record_content() to use SSL record structure
Use record length from record structure when fetching content in TLS
...
* origin/pr/2781:
Documentation fixes according to review
Remove unused label in ssl_client2/ssl_server2
Add missing word in documentation of mbedtls_ssl_check_record()
cli/srv ex: Add dbg msg if record checking gives inconsistent result
Fix minor issues in documentation of mbedtls_ssl_check_record()
State that record checking is DTLS only and doesn't check content type
Update version_features.c
Pass dgrams to mbedtls_ssl_check_record in ssl_client2/server2
Add IO wrappers to ssl_server2 as interm's between NET and SSL layer
Add IO wrappers to ssl_client2 as interm's between NET and SSL layer
Introduce configuration option and API for SSL record checking
In psa_import_key, the key bits value was uninitialized before
calling the secure element driver import function. There is a
potential issue if the driver returns PSA_SUCCESS without setting
the key bits. This shouldn't happen, but shouldn't be discounted
either, so we initialize the key bits to an invalid issue.
* development:
Rename local variables
Update submodule
Update Visual studio project file
Move the examples to PSA 1.0
Use psa_raw_key_agreement
Remove calls to psa_allocate_key
Make variable naming consistent
Update psa_create_key to PSA 1.0
Update psa_import_key to PSA 1.0
Update psa_generator_abort to PSA 1.0
Update psa_generator_read to PSA 1.0
Update psa_crypto_generator_t to PSA 1.0
Update psa_key_agreement to PSA 1.0
Update GENERATOR_INIT macro to PSA 1.0
Update KEYPAIR macros to PSA 1.0
* crypto/pr/212: (337 commits)
Make TODO comments consistent
Fix PSA tests
Fix psa_generate_random for >1024 bytes
Add tests to generate more random than MBEDTLS_CTR_DRBG_MAX_REQUEST
Fix double free in psa_generate_key when psa_generate_random fails
Fix copypasta in test data
Avoid a lowercase letter in a macro name
Correct some comments
Fix PSA init/deinit in mbedtls_xxx tests when using PSA
Make psa_calculate_key_bits return psa_key_bits_t
Adjust secure element code to the new ITS interface
More refactoring: consolidate attribute validation
Fix policy validity check on key creation.
Add test function for import with a bad policy
Test key creation with an invalid type (0 and nonzero)
Remove "allocated" flag from key slots
Take advantage of psa_core_key_attributes_t internally #2
Store the key size in the slot in memory
Take advantage of psa_core_key_attributes_t internally: key loading
Switch storage functions over to psa_core_key_attributes_t
...
* development:
Update crypto to a repo with latest crypto
Update Mbed Crypto
tls: Remove duplicate psa_util.h include
Remove unused cryptography test files
Remove crypto C files
Remove files sourced from Mbed Crypto
config: Fix Doxygen link to MBEDTLS_PARAM_FAILED
Use mbedtls-based path for includes
check-names: Consider crypto-sourced header files
Resolve conflicts by performing the following actions:
- Reject changes to ChangeLog, as Mbed Crypto doesn't have one
- Reject changes to tests/compat.sh, as Mbed Crypto doesn't have it
- Reject changes to programs/fuzz/onefile.c, as Mbed Crypto doesn't have
it
- Resolve minor whitespace differences in library/ecdsa.c by taking the
version from Mbed TLS upstream.
* origin/development:
Honor MBEDTLS_CONFIG_FILE in fuzz tests
Test that a shared library build produces a dynamically linked executable
Test that the shared library build with CMake works
Add a test of MBEDTLS_CONFIG_FILE
Exclude DTLS 1.2 only with older OpenSSL
Document the rationale for the armel build
Switch armel build to -Os
Add a build on ARMv5TE in ARM mode
Add changelog entry for ARM assembly fix
bn_mul.h: require at least ARMv6 to enable the ARM DSP code
Adapt ChangeLog
ECP restart: Don't calculate address of sub ctx if ctx is NULL
This commit implements the record checking API
mbedtls_ssl_check_record()
on top of the restructured incoming record stack.
Specifically, it makes use of the fact that the core processing routines
ssl_parse_record_header()
mbedtls_ssl_decrypt_buf()
now operate on instances of the SSL record structure mbedtls_record
instead of the previous mbedtls_ssl_context::in_xxx fields.
ssl_get_next_record() updates the legacy in_xxx fields in two places,
once before record decryption and once after. Now that record decryption
doesn't use or affect the in_xxx fields anymore, setting up the these
legacy fields can entirely be moved to the end of ssl_get_next_record(),
which is what this comit does.
This commit solely moves existing code, but doesn't yet simplify the
now partially redundant settings of the in_xxx fields. This will be
done in a separate commit.
Multiple record attributes such as content type and payload length
may change during record decryption, and the legacy in_xxx fields
in the SSL context therefore need to be updated after the record
decryption routine ssl_decrypt_buf() has been called.
After the previous commit has made ssl_prepare_record_content()
independent of the in_xxx fields, setting them can be moved
outside of ssl_prepare_record_content(), which is what this
commit does.
Previously, ssl_update_in_pointers() ensured that the in_xxx pointers
in the SSL context are set to their default state so that the record
header parsing function ssl_parse_record_header() could make use of them.
By now, the latter is independent of these pointers, so they don't need
to be setup before calling ssl_parse_record_header() anymore.
However, other parts of the messaging stack might still depend on it
(to be studied), and hence this commit does not yet reomve
ssl_update_in_pointers() entirely.
The stack maintains pointers mbedtls_ssl_context::in_xxx pointing to
various parts of the [D]TLS record header. Originally, these fields
were determined and set in ssl_parse_record_header(). By now,
ssl_parse_record_header() has been modularized to setup an instance
of the internal SSL record structure mbedtls_record, and to derive
the old in_xxx fields from that.
This commit takes a further step towards removing the in_xxx fields
by deriving them from the established record structure _outside_ of
ssl_parse_record_header() after the latter has succeeded.
One exception is the handling of possible client reconnects,
which happens in the case then ssl_parse_record_header() returns
MBEDTLS_ERR_SSL_UNEXPECTED_RECORD; since ssl_check_client_reconnect()
so far uses the in_xxx fields, they need to be derived from the
record structure beforehand.
This commit makes a first step towards modularizing the incoming record
processing by having it operate on instances of the structure mbedtls_record
representing SSL records.
So far, only record encryption/decryption operate in terms of record
instances, but the rest of the parsing doesn't. In particular,
ssl_parse_record_header() operates directly on the fixed input buffer,
setting the various ssl->in_xxx pointers and fields, and only directly
before/after calling ssl_decrypt_buf() these fields a converted to/from
mbedtls_record instances.
This commit does not yet remove the ssl->in_xxx fields, but makes a step
towards extending the lifetime of mbedtls_record structure representing
incoming records, by modifying ssl_parse_record_header() to setup an
instance of mbedtls_record, and setting the ssl->in_xxx fields from that
instance. The instance so-constructed isn't used further so far, and in
particular it is not yet consolidated with the instance set up for use
in ssl_decrypt_record(). That's for a later commit.
Previously, ssl_parse_record_header() did not check whether the current
datagram is large enough to hold a record of the advertised size. This
could lead to records being silently skipped over or backed up on the
basis of an invalid record length. Concretely, the following would happen:
1) In the case of a record from an old epoch, the record would be
'skipped over' by setting next_record_offset according to the advertised
but non-validated length, and only in the subsequent mbedtls_ssl_fetch_input()
it would be noticed in an assertion failure if the record length is too
large for the current incoming datagram.
While not critical, this is fragile, and also contrary to the intend
that MBEDTLS_ERR_SSL_INTERNAL_ERROR should never be trigger-able by
external input.
2) In the case of a future record being buffered, it might be that we
backup a record before we have validated its length, hence copying
parts of the input buffer that don't belong to the current record.
This is a bug, and it's by luck that it doesn't seem to have critical
consequences.
This commit fixes this by modifying ssl_parse_record_header() to check that
the current incoming datagram is large enough to hold a record of the
advertised length, returning MBEDTLS_ERR_SSL_INVALID_RECORD otherwise.
We don't send alerts on other instances of ill-formed records,
so why should we do it here? If we want to keep it, the alerts
should rather be sent ssl_get_next_record().
As explained in the previous commit, if mbedtls_ssl_fetch_input()
is called multiple times, all but the first call are equivalent to
bounds checks in the incoming datagram.
In DTLS, if mbedtls_ssl_fetch_input() is called multiple times without
resetting the input buffer in between, the non-initial calls are functionally
equivalent to mere bounds checks ensuring that the incoming datagram is
large enough to hold the requested data. In the interest of code-size
and modularity (removing a call to a non-const function which is logically
const in this instance), this commit replaces such a call to
mbedtls_ssl_fetch_input() by an explicit bounds check in
ssl_parse_record_header().
Previously, `ssl_handle_possible_reconnect()` was part of
`ssl_parse_record_header()`, which was required to return a non-zero error
code to indicate a record which should not be further processed because it
was invalid, unexpected, duplicate, .... In this case, some error codes
would lead to some actions to be taken, e.g. `MBEDTLS_ERR_SSL_EARLY_MESSAGE`
to potential buffering of the record, but eventually, the record would be
dropped regardless of the precise value of the error code. The error code
`MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED` returned from
`ssl_handle_possible_reconnect()` did not receive any special treatment and
lead to silent dopping of the record - in particular, it was never returned
to the user.
In the new logic this commit introduces, `ssl_handle_possible_reconnect()` is
part of `ssl_check_client_reconnect()` which is triggered _after_
`ssl_parse_record_header()` found an unexpected record, which is already in
the code-path eventually dropping the record; we want to leave this code-path
only if a valid cookie has been found and we want to reset, but do nothing
otherwise. That's why `ssl_handle_possible_reconnect()` now returns `0` unless
a valid cookie has been found or a fatal error occurred.
Availability of sufficient incoming data should be checked when
it is needed, which is in mbedtls_ssl_fetch_input(), and this
function has the necessary bounds checks in place.
The check is in terms of the internal input buffer length and is
hence likely to be originally intended to protect against overflow
of the input buffer when fetching data from the underlying
transport in mbedtls_ssl_fetch_input(). For locality of reasoning,
it's better to perform such a check close to where it's needed,
and in fact, mbedtls_ssl_fetch_input() _does_ contain an equivalent
bounds check, too, rendering the bounds check in question redundant.
mbedtls_ssl_decrypt_buf() asserts that the passed transform is not NULL,
but the function is only invoked in a single place, and this invocation
is clearly visible to be within a branch ensuring that the incoming
transform isn't NULL. Remove the assertion for the benefit of code-size.
The previous code performed architectural maximum record length checks
both before and after record decryption. Since MBEDTLS_SSL_IN_CONTENT_LEN
bounds the maximum length of the record plaintext, it suffices to check
only once after (potential) decryption.
This must not be confused with the internal check that the record
length is small enough to make the record fit into the internal input
buffer; this is done in mbedtls_ssl_fetch_input().
Adopt a simple method for tracking whether there was a failure: each
fallible operation sets overall_status, unless overall_status is
already non-successful. Thus in case of multiple failures, the
function always reports whatever failed first. This may not always be
the right thing, but it's simple.
This revealed a bug whereby if the only failure was the call to
psa_destroy_se_key(), i.e. if the driver reported a failure or if the
driver lacked support for destroying keys, psa_destroy_key() would
ignore that failure.
For a key in a secure element, if creating a transaction file fails,
don't touch storage, but close the key in memory. This may not be
right, but it's no wronger than it was before. Tracked in
https://github.com/ARMmbed/mbed-crypto/issues/215
When a key slot is wiped, a copy of the key material may remain in
operations. This is undesirable, but does not violate the safety of
the code. Tracked in https://github.com/ARMmbed/mbed-crypto/issues/86
The methods to import and generate a key in a secure element drivers
were written for an earlier version of the application-side interface.
Now that there is a psa_key_attributes_t structure that combines all
key metadata including its lifetime (location), type, size, policy and
extra type-specific data (domain parameters), pass that to drivers
instead of separate arguments for each piece of metadata. This makes
the interface less cluttered.
Update parameter names and descriptions to follow general conventions.
Document the public-key output on key generation more precisely.
Explain that it is optional in a driver, and when a driver would
implement it. Declare that it is optional in the core, too (which
means that a crypto core might not support drivers for secure elements
that do need this feature).
Update the implementation and the tests accordingly.
Register an existing key in a secure element.
Minimal implementation that doesn't call any driver method and just
lets the application declare whatever it wants.
Pass the key creation method (import/generate/derive/copy) to the
driver methods to allocate or validate a slot number. This allows
drivers to enforce policies such as "this key slot can only be used
for keys generated inside the secure element".
Let psa_start_key_creation know what type of key creation this is. This
will be used at least for key registration in a secure element, which
is a peculiar kind of creation since it uses existing key material.
Allow the application to choose the slot number in a secure element,
rather than always letting the driver choose.
With this commit, any application may request any slot. In an
implementation with isolation, it's up to the service to filter key
creation requests and apply policies to limit which applications can
request which slot.
This function no longer modifies anything, so it doesn't actually
allocate the slot. Now, it just returns the empty key slot, and it's
up to the caller to cause the slot to be in use (or not).
Add a slot_number field to psa_key_attributes_t and getter/setter
functions. Since slot numbers can have the value 0, indicate the
presence of the field via a separate flag.
In psa_get_key_attributes(), report the slot number if the key is in a
secure element.
When creating a key, for now, applications cannot choose a slot
number. A subsequent commit will add this capability in the secure
element HAL.
Add infrastructure for internal, external and dual-use flags, with a
compile-time check (if static_assert is available) to ensure that the
same numerical value doesn't get declared for two different purposes
in crypto_struct.h (external or dual-use) and
psa_crypto_core.h (internal).
mbedtls_ctr_drbg_random can only return up to
MBEDTLS_CTR_DRBG_MAX_REQUEST (normally 1024) bytes at a time. So if
more than that is requested, call mbedtls_ctr_drbg_random in a loop.
When psa_generate_random fails, psa_generate_key_internal frees the
key buffer but a the pointer to the now-freed buffer in the slot. Then
psa_generate_key calls psa_fail_key_creation which sees the pointer
and calls free() again.
This bug was introduced by ff5f0e7221
"Implement atomic-creation psa_{generate,generator_import}_key" which
changed how psa_generate_key() cleans up on errors. I went through the
code and could not find a similar bug in cleanup on an error during
key creation.
Fix#207
Conflict resolution:
* `scripts/config.pl`:
Take the exclusion of `MBEDTLS_PSA_CRYPTO_SE_C` from the API branch.
Take the removal of `MBEDTLS_PSA_CRYPTO_STORAGE_ITS_C` (obsolete) from
the development branch.
* `tests/scripts/all.sh`:
Multiple instances of factoring a sequence of `config.pl` calls into
a mere `config.pl baremetal` in the development branch, and a change in
the composition of `baremetal` in the API branch. In each case, take the
version from development.
* `tests/suites/test_suite_psa_crypto_slot_management.function`:
A function became non-static in development and disappeared in the API
branch. Keep the version from the API branch. Functions need to be
non-static if they're defined but unused in some configurations,
which is not the case for any function in this file at the moment.
* `tests/suites/test_suite_psa_crypto.function`:
Consecutive changes in the two branches, reconciled.
The flag to mark key slots as allocated was introduced to mark slots
that are claimed and in use, but do not have key material yet, at a
time when creating a key used several API functions: allocate a slot,
then progressively set its metadata, and finally create the key
material. Now that all of these steps are combined into a single
API function call, the notion of allocated-but-not-filled slot is no
longer relevant. So remove the corresponding flag.
A slot is occupied iff there is a key in it. (For a key in a secure
element, the key material is not present, but the slot contains the
key metadata.) This key must have a type which is nonzero, so use this
as an indicator that a slot is in use.
There is now a field for the key size in the key slot in memory. Use
it.
This makes psa_get_key_attributes() marginally faster at the expense
of memory that is available anyway in the current memory layout (16
bits for the size, 16 bits for flags). That's not the goal, though:
the goal is to simplify the code, in particular to make it more
uniform between transparent keys (whose size can be recomputed) and
keys in secure elements (whose size cannot be recomputed).
For keys in a secure element, the bit size is now saved by serializing
the type psa_key_bits_t (which is an alias for uint16_t) rather than
size_t.
Change the type of key slots in memory to use
psa_core_key_attributes_t rather than separate fields. The goal is to
simplify some parts of the code. This commit only does the mechanical
replacement, not the substitution.
The bit-field `allocate` is now a flag `PSA_KEY_SLOT_FLAG_ALLOCATED`
in the `flags` field.
Write accessor functions for flags.
Key slots now contain a bit size field which is currently unused.
Subsequent commits will make use of it.
Resolve conflicts by performing the following operations:
- Reject changes related to building a crypto submodule, since Mbed
Crypto is the crypto submodule.
- Reject X.509, NET, and SSL changes.
- Reject changes to README, as Mbed Crypto is a different project from
Mbed TLS, with a different README.
- Avoid adding mention of ssl-opt.sh in a comment near some modified
code in include/CMakeLists.txt (around where ENABLE_TESTING as added).
- Align config.pl in Mbed TLS with config.pl in Mbed Crypto where PSA
options are concerned, to make future merging easier. There is no
reason for the two to be different in this regard, now that Mbed TLS
always depends on Mbed Crypto. Remaining differences are only the
PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER option and the absence of X.509,
NET, and SSL related options in Mbed Crypto's config.pl.
- Align config.h in Mbed Crypto with Mbed TLS's copy, with a few notable
exceptions:
- Leave CMAC on by default.
- Leave storage on by default (including ITS emulation).
- Avoid documenting the PSA Crypto API as is in beta stage in
documentation for MBEDTLS_PSA_CRYPTO_C.
The only remaining differences are a lack of X.509, NET, and SSL
options in Mbed Crypto's config.h, as well as an additional
Mbed-Crypto-specific PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER option.
Documentation for the check params feature and related macros is also
updated to match Mbed TLS's description.
- Reject tests/data_files/Makefile changes to generate DER versions of
CRTs and keys, as none of those are used by Mbed Crypto tests.
- Add the "no PEM and no filesystem" test to all.sh, without ssl-opt.sh
run, as Mbed Crypto doesn't have ssl-opt.sh. Also remove use of PSA
Crypto storage and ITS emulation, since those depend on filesystem
support.
- Reject addition of test when no ciphersuites have MAC to all.sh, as
the option being tested, MBEDTLS_SSL_SOME_MODES_USE_MAC, is not
present in Mbed Crypto.
- Use baremetal config in all.sh, as Mbed Crypto's baremetal
configuration does exclude the net module (as it doesn't exist in Mbed
Crypto)
- Reject cmake_subproject_build changes, continuing to link only
libmbedcrypto.
- Reject changes to visualc and associated templates. Mbed Crypto
doesn't need additional logic to handle submodule-sourced headers.
- Avoid adding fuzzers from Mbed TLS. The only relevant fuzzers are the
privkey and pubkey fuzzers, but non-trivial work would be required to
integrate those into Mbed Crypto (more than is comfortable in a merge
commit).
- Reject addition of Docker wrappers for compat.sh and ssl-opt.sh, as
those are not present in Mbed Crypto.
- Remove calls to SSL-related scripts from basic-in-docker.sh
Fix test errors by performing the following:
- Avoid using a link that Doxygen can't seem to resolve in Mbed Crypto,
but can resolve in Mbed TLS. In documentation for
MBEDTLS_CHECK_PARAMS, don't attempt to link to MBEDTLS_PARAM_FAILED.
* origin/development: (339 commits)
Do not build fuzz on windows
No booleans and import config
Removing space before opening parenthesis
Style corrections
Syntax fix
Fixes warnings from MSVC
Add a linker flag to enable gcov in basic-build-test.sh
Update crypto submodule to a revision with the HAVEGE header changes
Test with MBEDTLS_ECP_RESTARTABLE
Allow TODO in code
Use the docstring in the command line help
Split _abi_compliance_command into smaller functions
Record the commits that were compared
Document how to build the typical argument for -s
Allow running /somewhere/else/path/to/abi_check.py
tests: Limit each log to 10 GiB
Warn if VLAs are used
Remove redundant compiler flag
Consistently spell -Wextra
Fix parsing issue when int parameter is in base 16
...
65528 bits is more than any reasonable key until we start supporting
post-quantum cryptography.
This limit is chosen to allow bit-sizes to be stored in 16 bits, with
65535 left to indicate an invalid value. It's a whole number of bytes,
which facilitates some calculations, in particular allowing a key of
exactly PSA_CRYPTO_MAX_STORAGE_SIZE to be created but not one bit
more.
As a resource usage limit, this is arguably too large, but that's out
of scope of the current commit.
Test that key import, generation and derivation reject overly large
sizes.
Move the "core attributes" to a substructure of psa_key_attribute_t.
The motivation is to be able to use the new structure
psa_core_key_attributes_t internally.
For a key in a secure element, save the bit size alongside the slot
number.
This is a quick-and-dirty implementation where the storage format
depends on sizeof(size_t), which is fragile. This should be replaced
by a more robust implementation before going into production.
Add a parameter to the key import method of a secure element driver to
make it report the key size in bits. This is necessary (otherwise the
core has no idea what the bit-size is), and making import report it is
easier than adding a separate method (for other key creation methods,
this information is an input, not an output).
Nothing has been saved to disk yet, but there is stale data in
psa_crypto_transaction. This stale data should not be reused, but do
wipe it to reduce the risk of it mattering somehow in the future.
Introduce a new function psa_get_transparent_key which returns
NOT_SUPPORTED if the key is in a secure element. Use this function in
functions that don't support keys in a secure element.
After this commit, all functions that access a key slot directly via
psa_get_key_slot or psa_get_key_from_slot rather than via
psa_get_transparent_key have at least enough support for secure
elements not to crash or otherwise cause undefined behavior. Lesser
bad behavior such as wrong results or resource leakage is still
possible in error cases.
The following provides more information on this PR:
- PSA stands for Platform Security Architecture.
- Add support for use of psa_trusted_storage_api internal_trusted_storage.h v1.0.0
as the interface to the psa_trusted_storage_linux backend (i.e. for persistent
storage when MBEDTLS_PSA_ITS_FILE_C is not defined). This requires changes
to psa_crypto_its.h and psa_crypto_storage.c to migrate to the new API.
Stored keys must contain lifetime information. The lifetime used to be
implied by the location of the key, back when applications supplied
the lifetime value when opening the key. Now that all keys' metadata
are stored in a central location, this location needs to store the
lifetime explicitly.
Pass information via a key attribute structure rather than as separate
parameters to psa_crypto_storage functions. This makes it easier to
maintain the code when the metadata of a key evolves.
This has negligible impact on code size (+4B with "gcc -Os" on x86_64).
Key creation and key destruction for a key in a secure element both
require updating three pieces of data: the key data in the secure
element, the key metadata in internal storage, and the SE driver's
persistent data. Perform these actions in a transaction so that
recovery is possible if the action is interrupted midway.
Implement a transaction record that can be used for actions that
modify more than one piece of persistent data (whether in the
persistent storage or elsewhere such as in a secure element).
While performing a transaction, the transaction file is present in
storage. If the system starts with an ongoing transaction, it must
complete the transaction (not implemented yet).
In the generic message digest abstraction, instead of storing method
pointers in the per-algorithm data structure and using wrapper
functions as those methods, call the per-algorithm function directly.
This saves some code size (2336B -> 2043B for md with all algorithms
enabled on M0+ with gcc -Os). This should also make it easier to
optimize the case when a single algorithm is supported. In addition,
this is a very slight security improvement since it removes one
opportunity for a buffer overflow to directly turn into letting the
attacker overwrite a pointer to a function pointer.
This commit does not modify the documented API. However, it removes
the possibility for users to define their own hash implementations and
use them by building their own md_info.
Changing mbedtls_md_context to contain a md type identifier rather
than a pointer to an info structure would save a few more bytes and a
few more runtime memory accesses, but would be a major API break since
a lot of code uses `const mbedtls_md_info *` to keep track of which
hash is in use.
All modules using restartable ECC operations support passing `NULL`
as the restart context as a means to not use the feature.
The restart contexts for ECDSA and ECP are nested, and when calling
restartable ECP operations from restartable ECDSA operations, the
address of the ECP restart context to use is calculated by adding
the to the address of the ECDSA restart context the offset the of
the ECP restart context.
If the ECP restart context happens to not reside at offset `0`, this
leads to a non-`NULL` pointer being passed to restartable ECP
operations from restartable ECDSA-operations; those ECP operations
will hence assume that the pointer points to a valid ECP restart
address and likely run into a segmentation fault when trying to
dereference the non-NULL but close-to-NULL address.
The problem doesn't arise currently because luckily the ECP restart
context has offset 0 within the ECDSA restart context, but we should
not rely on it.
This commit fixes the passage from restartable ECDSA to restartable ECP
operations by propagating NULL as the restart context pointer.
Apart from being fragile, the previous version could also lead to
NULL pointer dereference failures in ASanDbg builds which dereferenced
the ECDSA restart context even though it's not needed to calculate the
address of the offset'ed ECP restart context.
All modules using restartable ECC operations support passing `NULL`
as the restart context as a means to not use the feature.
The restart contexts for ECDSA and ECP are nested, and when calling
restartable ECP operations from restartable ECDSA operations, the
address of the ECP restart context to use is calculated by adding
the to the address of the ECDSA restart context the offset the of
the ECP restart context.
If the ECP restart context happens to not reside at offset `0`, this
leads to a non-`NULL` pointer being passed to restartable ECP
operations from restartable ECDSA-operations; those ECP operations
will hence assume that the pointer points to a valid ECP restart
address and likely run into a segmentation fault when trying to
dereference the non-NULL but close-to-NULL address.
The problem doesn't arise currently because luckily the ECP restart
context has offset 0 within the ECDSA restart context, but we should
not rely on it.
This commit fixes the passage from restartable ECDSA to restartable ECP
operations by propagating NULL as the restart context pointer.
Apart from being fragile, the previous version could also lead to
NULL pointer dereference failures in ASanDbg builds which dereferenced
the ECDSA restart context even though it's not needed to calculate the
address of the offset'ed ECP restart context.
dummy
Replace some frequently-used macros by inline functions: instead of
calling MOD_{ADD,SUB,MUL} after the mbedtls_mpi_{add,sub,mul}_mpi,
call a function mbedtls_mpi_xxx_mod that does the same.
In the baremetal config, with "gcc -Os -mthumb -mcpu=cortex-m0plus",
ecp.o goes down from 13878 bytes to 12234.
No noticeable performance change for benchmarks on x86_64 with either
"gcc -O2" or "gcc -Os".
When creating a key with a lifetime that places it in a secure
element, retrieve the appropriate driver table entry.
This commit doesn't yet achieve behavior: so far the code only
retrieves the driver, it doesn't call the driver.
Expose the type of an entry in the SE driver table as an opaque type
to other library modules. Soon, driver table entries will have state,
and callers will need to be able to access this state through
functions using this opaque type.
Provide functions to look up a driver by its lifetime and to retrieve
the method table from an entry.
Remove use of CMAKE_SOURCE_DIR in case mbedtls is built from within
another CMake project. Define MBEDTLS_DIR to ${CMAKE_CURRENT_SOURCE_DIR}
in the main CMakeLists.txt file and refer to that when defining target
include paths to enable mbedtls to be built as a sub project.
Fixes#2609
Signed-off-by: Ashley Duncan <ashes.man@gmail.com>
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
* origin/development: (33 commits)
Test with MBEDTLS_ECP_RESTARTABLE
Allow TODO in code
Use the docstring in the command line help
Split _abi_compliance_command into smaller functions
Record the commits that were compared
Document how to build the typical argument for -s
Allow running /somewhere/else/path/to/abi_check.py
Warn if VLAs are used
Remove redundant compiler flag
Consistently spell -Wextra
Update Mbed Crypto to contain mbed-crypto#152
Improve compatibility with firewalled networks
Dockerfile: apt -> apt-get
Change Docker container to bionic
Clean up file prologue comments
Add docker-based test scripts
ChangeLog: Add ChangeLog entry for #2681
Allow declarations after statements
CMake: Add a subdirectory build regression test
README: Enable builds as a CMake subproject
...
* origin/pr/2706:
Update Mbed Crypto to contain mbed-crypto#152
CMake: Add a subdirectory build regression test
README: Enable builds as a CMake subproject
ChangeLog: Enable builds as a CMake subproject
Remove use of CMAKE_SOURCE_DIR
* origin/pr/2632:
Adapt ChangeLog
Avoid use of large stack buffers in mbedtls_x509_write_crt_pem()
Improve documentation of mbedtls_pem_write_buffer()
Perform CRT writing in-place on the output buffer
Adapt x509write_crt.c to coding style
The failure of mbedtls_md was not checked in one place. This could have led
to an incorrect computation if a hardware accelerator failed. In most cases
this would have led to the key exchange failing, so the impact would have been
a hard-to-diagnose error reported in the wrong place. If the two sides of the
key exchange failed in the same way with an output from mbedtls_md that was
independent of the input, this could have led to an apparently successful key
exchange with a predictable key, thus a glitching md accelerator could have
caused a security vulnerability.
The window size variable in ecp_pick_window_size() can take values
4, 5 or 6, but we clamp it not to exceed the value of
MBEDTLS_ECP_WINDOW_SIZE. If that is 6 (default) or higher, the
static analyzer will point out that the test:
w > MBEDTLS_ECP_WINDOW_SIZE always evaluates to false.
This commit removes the test for the cases of the window size
large enough to fit all the potential values of the variable.
The psa_tls12_prf_set_seed() and psa_tls12_prf_set_label() functions did
not work on platforms where malloc(0) returns NULL.
It does not affect the TLS use case but these PRFs are used in other
protocols as well and might not be used the same way. For example EAP
uses the TLS PRF with an empty secret. (This would not trigger the bug,
but is a strong indication that it is not safe to assume that certain
inputs to this function are not zero length.)
The conditional block includes the memcpy() call as well to avoid
passing a NULL pointer as a parameter resulting in undefined behaviour.
The current tests are already using zero length label and seed, there is
no need to add new test for this bug.
Secure element support has its own source file, and in addition
requires many hooks in other files. This is a nontrivial amount of
code, so make it optional (but default on).
Remove use of CMAKE_SOURCE_DIR in case mbedtls is built from within
another CMake project. Define MBEDTLS_DIR to ${CMAKE_CURRENT_SOURCE_DIR}
in the main CMakeLists.txt file and refer to that when defining target
include paths to enable mbedtls to be built as a sub project.
Fixes https://github.com/ARMmbed/mbedtls/issues/2609
Signed-off-by: Ashley Duncan <ashes.man@gmail.com>
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
PSA_ERROR_BAD_STATE means that the function was called on a context in a
bad state.
This error is something that can't happen while only using the PSA API and
therefore a PSA_ERROR_CORRUPTION_DETECTED is a more appropriate error
code.
The macro initialiser might leave bytes in the union unspecified.
Zeroising it in setup makes sure that the behaviour is the same
independently of the initialisation method used.
The TLS 1.2 pseudorandom function does a lot of distinct HMAC operations
with the same key. To save the battery and CPU cycles spent on
calculating the paddings and hashing the inner padding, we keep the
hash context in the status right after the inner padding having been
hashed and clone it as needed.
