This is automatic in CPython but not guaranteed by the language. Be friendly
to other Python implementations.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
MBEDTLS_HAVE_TIME is documented as: "System has time.h and time()."
If that is not defined, do not attempt to include time.h.
A particular problem is platform-time.h, which should only be included if
MBEDTLS_HAVE_TIME is defined, which makes everything messier. Maybe it
should be refactored to have the check inside the header.
Signed-off-by: Daniel Axtens <dja@axtens.net>
The storage format comparison has a dual purpose: detect format changes that
lead to a loss of backward compatibility, and detect loss of test coverage.
For loss of backward compatibility, the read tests are the relevant ones.
For loss of test coverage, all generated test cases are potentially
relevant, but this script currently focuses on storage format (where a loss
of test coverage may be a symptom of a loss of backward compatibility).
Therefore, storage format test comparison now looks at manually written
storage format tests, but only if they're read tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Expand abi_check.py to look for backward incompatibilities not only in
the interface exposed to application code (and to some extent driver
code), but also to the interface exposed via the storage format, which
is relevant when upgrading Mbed TLS on a device with a PSA keystore.
Strictly speaking, the storage format checks look for regressions in
the automatically generated storage format test data. Incompatible
changes that are not covered by the generated tests will also not be
covered by the interface checker.
A known defect in this commit is that the --brief output is not brief
for storage format checks.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This way we can add other checks and only run a subset of all the
checks. The default remains to run all the checks.
I made separate options for API and ABI, but since we use the same
tool for both and it doesn't have an obvious way to check only API or
only ABI, the two options must be both enabled or both disabled.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Provide an additional pair of #defines, MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT
and MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY. At most one of them may be
specified. If used, it is necessary to compile with -march=armv8-a+crypto.
The MBEDTLS_SHA256_PROCESS_ALT and MBEDTLS_SHA256_ALT mechanisms
continue to work, and are mutually exclusive with A64_CRYPTO.
There should be minimal code size impact if no A64_CRYPTO option is set.
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
Jinja2 <3.0 require markupsafe <2.1.0, but does not declare this
requirement. (Jinja2 2.x has not been updated since markupsafe 2.1.0 came
out). So declare this requirement ourselves.
This is not ideal, since we would want to use the latest markupsafe with the
latest Jinja2. But at least it gives us a consistent set of versions to run
the CI with.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Include more curves. For example, the Brainpool curves don't have
dedicated "mod p" reduction routines, so they have a much larger number
of allocs (comparable to the NIST curves with `MBEDTLS_ECP_NIST_OPTIM`
disabled).
On the other hand, to keep the script's running time reasonable, remove
a few things:
- curves smaller than 256 bits (out of favour these days)
- window sizes larger than the default: 6 was particularly useless as
it's never selected by the current code; 5 can only be selected with
curves >= 384 and is unlikely to be used in practice as it increases
heap usage quite a lot for very little performance gain.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Clearly the intention was to enable it, as ECDSA_C was defined, but the
benchmark also requires SHA-256 for ECDSA.
Also, specify "ecdh ecdsa" when invoking the benchmark program, in order
to avoid spurious output about SHA-256.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
* Updated the default argument to create less noise with argument
passing.
* Reworded ChangeLog to match MbedTLS documentation/ announcement
requirements
Signed-off-by: Archana <archana.madhavan@silabs.com>
Pylint errors are fixed.
The Python script is improved to take default arguments when not
passed (eg invoked from root of the tree)
check-generated-files.sh and CMakeLists.sh updated.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Moved python script generate_driver_wrappers.py under scripts and
corresponding template file under script/data_files.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Change 'tranlation' -> 'translation' in the name of a
method in `scripts/generate_ssl_debug_headers.py`.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Passing arguments on the command line apparently didn't work due to quoting
issues. Use a temporary file instead.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Wherever we have a requirement on foo>=N, install foo==N. This is for
testing, to ensure that we don't accidentally depend on features that are
not present in the minimum version we declare support for.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Driver implementers need to regenerate wrappers. This will use Jinja2 as
discussed in
https://github.com/ARMmbed/mbedtls/pull/5067#discussion_r738794607
On the development branch, driver integration is always needed to generate
the driver wrapper and thus to build the library, so this requirement
applies to everyone, not just driver implementers. In releases, we plan to
include a default driver wrapper with support for basic use cases only,
meaning that the line `-r driver.requirements.txt` should be removed from
`basic.requirements.txt` in releases.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add pip requirements files. We'll have separate requirements files for
different target audiences. Each file can use `-r` lines to include other
files.
This commit adds two requirement files: one with everything that's needed to
pass the CI, and one with additional tools that are suggested for Mbed TLS
maintainers to install locally.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add usage information to the ARGV-incorrect-length error
message in generate_query_config.pl. A plain usage message
looks a bit incongruous when raised as an error, but the
error message alone is unhelpful.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Genertae test_suite_psa_crypto_generate_key.generated.data.
Use test_suite_psa_crypto_generate_key.function as a test function.
Signed-off-by: Przemyslaw Stekiel <przemyslaw.stekiel@mobica.com>
This is a variant of PSA_ALG_RSA_PSS which currently has exactly the same
behavior, but is intended to have a different behavior when verifying
signatures.
In a subsequent commit, PSA_ALG_RSA_PSS will change to requiring the salt
length to be what it would produce when signing, as is currently documented,
whereas PSA_ALG_RSA_PSS_ANY_SALT will retain the current behavior of
allowing any salt length (including 0).
Changes in this commit:
* New algorithm constructor PSA_ALG_RSA_PSS_ANY_SALT.
* New predicates PSA_ALG_IS_RSA_PSS_STANDARD_SALT (corresponding to
PSA_ALG_RSA_PSS) and PSA_ALG_IS_RSA_PSS_ANY_SALT (corresponding to
PSA_ALG_RSA_PSS_ANY_SALT).
* Support for the new predicates in macro_collector.py (needed for
generate_psa_constant_names).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The baremetal configuration includes debugging features whose size is not
particularly interesting. Create a new preset for use when benchmarking code
size which excludes debugging features that increase the size of
non-debugging modules.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
They were recognized by a prior commit. In this commit, replace line
breaks (with optional comment continuation marker) by spaces.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Before this commit, definitions of error codes must match a strict pattern,
with a Doxygen comment following the definition on the same line and
starting with "/**<". Change how generate_errors.pl so that the Doxygen
comment can be before the definition instead of after, and doesn't have to
be on the same line.
Also allow spaces between "#" and "define", and allow Doxygen comments to
start with "/*!" rather than "/**". Starting with "///" or "//!" is not
supported.
This commit does not change the output of generate_errors.pl.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add test cases validating that if a stored key only had the hash policy,
then after loading it psa_get_key_attributes reports that it also has the
message policy, and the key can be used with message functions.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Also remove preprocessor logic for MBEDTLS_CONFIG_FILE, since
build_info.h alreadyy handles it.
This commit was generated using the following script:
# ========================
#!/bin/sh
git ls-files | grep -v '^include/mbedtls/build_info\.h$' | xargs sed -b -E -i '
/^#if !?defined\(MBEDTLS_CONFIG_FILE\)/i#include "mbedtls/build_info.h"
//,/^#endif/d
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
Test keys with various persistence levels, enumerated from the
metadata tests.
For read-only keys, do not attempt to create or destroy the key
through the API, only to read a key that has been injected into
storage directly through filesystem access.
Do not test keys with a non-default location, since they require a
driver and we do not yet have a dependency mechanism to require the
presence of a driver for a specific location value.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It was used to remove the code used when mbedtls_ecp_mul() received a
NULL RNG parameter. This code is no longer relevant (as the RNG may no
longer be NULL) and will be unconditionally removed in the next commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The new method `Config.change_matching` and the new command-line
commands `set-all` and `unset-all` change a batch of existing boolean
settings to the desired state (active or inactive).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When generating expressions to construct test case data, there can be
duplicate values, for example if a value of the form C(A) is present
as such in test_suite_psa_crypto_metadata.data and also constructed by
enumerating the argument A for the constructor C. Eliminate such
duplicates in generate_expressions.
This commit removes many test cases that were exact duplicates (and
were near-duplicates differing only in whitespace before the
whitespace normalization).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In macro_collector.py, base InputsForTest on PSAMacroEnumerator rather
than PSAMacroCollector. It didn't make much sense to use
PSAMacroCollector anymore since InputsForTest didn't use anything
other than the constructor.
psa_generate_tests now generates arguments for more macros.
In particular, it now collects macro arguments from
test_suite_psa_crypto_metadata. Algorithms with parameters are now
supported.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In generate_psa_tests, use InputsForTest rather than PSAMacroCollector
to gather values. This way, the enumeration of values to test includes
values used in metadata tests in addition to constructors parsed from
header files. This allows greater coverage of values built from
constructors with arguments. This doesn't make a difference yet, but
it will once algorithm constructors with arguments are supported in
generate_psa_tests.
Make the injection of numerical values optional. They are useful for
test_psa_constant_names, so keep them there. Don't use them for
not-supported tests: they might make sense, but the current code
wouldn't work since it doesn't know how to make up fake key material
or what dependencies to generate. Don't use them for storage tests:
they only make sense for supported values.
Don't inject 'PSA_SUCCESS': that's superfluous.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Conflicts:
library/version_features.c
programs/test/query_config.c
Files were removed in development branch and modified by current branch.
Conflicts fixes by removing them.
Changelog contents should be UTF-8 text files. So explicitly open all files as
UTF-8. This makes the script independent of the ambient locale (except with
respect to exception messages, but we can live with that).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Changelog contents should be UTF-8 text files. There's no need to be
binary-safe. So switch to using text strings in Python (str, not bytes). This
commit makes the following changes:
* Bytes literals (b'…') to string literals ('…').
* Subprocess output (which is all git information) is decoded as ascii.
* Inject text directly in exceptions rather than calling a decode method.
This is enough to make the script work as desired in a UTF-8 locale.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
"exit /b" without an explicit exit value doesn't copy the value of the
last command executed, causing issues on Jenkins.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
Accept Windows line endings in input files on any platform. This makes
the scripts work even when running a Unix perl with a source tree that
has Windows line endings, as happens for example on our Travis Windows
instances. This change is harmless in the common case where the input
has the platform's default line endings.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Instead of manipulating CR explicitly to cope with CRLF (Windows) line
endings in input and produce output with CRLF line endings, just
convert files from/to CRLF line endings when reading/writing.
The minimum required Perl version remains 5.8, since this both the
version that introduced Digest::MD5 (which was used before this patch)
and the version that introduced open "<:crlf" (which this patch
introduces).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't run `make list` to obtain the list of programs in
generate_visualc_files.pl. This doesn't work on Windows when a `make`
command is not available. Instead, read the makefile.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Conflicts:
* configs/config-psa-crypto.h: modified here, removed in development
* tests/suites/test_suite_x509parse.data: all conflicts are in depends_on
lines where development made a change unrelated to MBEDTLS_SHAxxx and our
branch either changed `MBEDTLS_SHA256_C` to `MBEDTLS_SHA224_C` or
`MBEDTLS_SHA512_C:!MBEDTLS_SHA512_NO_SHA384` to ``MBEDTLS_SHA384_C`, with
no change to what the test does. Pick the other branch's dependency
changes then apply our SHA dpeendency change.
Building the library without entropy sources negates any and all security
provided by the library.
This option was originally requested a relatively long time ago and it
does not provide any tangible benefit for users any more.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Although SHA512 is currently required to enable SHA384, this
is expected to change in the future. This commit is an
intermediate step towards fully separating SHA384 and SHA512.
check_config is the only module which enforces that SHA512 is
enabled together with SHA384.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Add a missing guard for the definition and declaration of
mbedtls_test_hook_error_add.
Also make the declaration always visible when MBEDTLS_TEST_HOOKS is
enabled. This fixes an issue when MBEDTLS_ERROR_C is not defined but
MBEDTLS_TEST_HOOKS is.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Fix unused parameter warnings when MBEDTLS_TEST_HOOKS is not enabled.
A few issues were caught by check-names.sh namely:
- mbedtls_error_add was not capitalised.
- mbedtls_test_hook_error_add was being defined multiple times as the
definition was in a header.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
The previous implementation of the error addition interface did not comply
with the invasive testing architecture guidelines. This commit fixes that
by:
- Renaming functions/macros/variables to follow the mbedtls_error_xxx or
mbedtls_test_hook_xxx convention.
- Making mbedtls_test_hook_error_add a global variable that can be set
by the testing code.
- Using a static inline function call, as opposed to macro, to keep
discrepancies between debug and production version to a minimum.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Change the signature of the `hook` parameter of `mbedtls_set_err_add_hook`
to use the actual signature of the function as opposed to `void *`. This
fixes a warning when compiling with clang `-pedantic`.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
`error.c` and error.h are the more logical place to keep this code and it
prevents issues with building `common.c` and conflicts with other projects
that use mbedtls (such as mbedOS).
`error.c` has been automatically generated by first adding the code to
`error.fmt` and then running `./scripts/generate_errors.pl`.
Also add parenthesis to the addition in `MBEDTLS_ERR_ADD`.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Fix typo.
Remove line break in string's code formatting, to enable
searching the code for particular string.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Add the test keys from RFC 8032 (§7.1 Ed25519 "TEST 1", §7.4 Ed448 "Blank").
This replaces the generic byte-sized data used for unknown key types
which no longer works now that Ed25519 is considered to have 255 bits.
Re-generate the automatically generated test data accordingly.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The coordinates are over $F_{2^{255}-19}$, so by the general
definition of the bit size associated with the curve in the
specification, the value for size attribute of keys is 255.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add an elliptic curve family for the twisted Edwards curves
Edwards25519 and Edwards448 ("Goldilocks"). As with Montgomery curves,
since these are the only two curves in common use, the family has a
generic name.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Generate test cases for all key types. These test cases cover the key
representation (checked with export) and the encoding of the key type and
the bit-size.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Construct an object given the attributes and material for a PSA crypto key
and get the Mbed TLS storage representation.
The code to generate the storage representation was written based on the
specification in docs/architecture/mbed-crypto-storage-specification.md,
without looking at the code.
The data in the unit tests is from the AES-128 format_storage_data_check
test case in test_suite_psa_crypto_persistent_key.data, tweaked manually.
This commit creates a basic framework for using symbolic values for
attributes, but does not yet implement obtaining the corresponding numerical
values from an external source.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Make it possible to enumerate the key types, algorithms, etc.
collected by PSAMacroCollector.
This commit ensures that all fields of PSAMacroEnumerator are filled
by code inspection. Testing of the result may reveal more work to be
done in later commits.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
`entropy_poll.h` is not supposed to be used by application code and
is therefore being made internal.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
`aesni.h` is an internal header and is moved accordingly.
Also removes some references to internal headers in scripts with
only public headers.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Simple find and replace using `#include (<|")mbedtls/(.*)_internal.h(>|")`
and `#include $1$2_internal.h$3`.
Also re-generated visualc files by running
`scripts/generate_visualc_files.pl`.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Make sure line number reported is correct for the overly long line, and
change the message to be more readable.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
As I descovered, a changelog entry with a line length greater than 80
characters would still pass CI. This is a quick change to the script to
make it detect these descrepancies and fail.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
There are type annotations that indirectly depend on the
typing_extensions module (on Python 3.5-3.7: Protocol was added to the
core typing module in 3.8). The typing_extensions module is not
installed by default, so the code didn't run on a pristine Python
installation.
To avoid depending on a non-default module, make the dependency on
typing_extensions optional. (It's still required to run mypy, but
installing mypy takes care of providing typing_extensions.) If it
isn't available, provide a substitute definition that's just good
enough to get the scripts to run.
Move this ugly code to its own module to avoid the temptation of
spreading such ugliness all over the place. It's likely to be used in
other modules anyway.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Otherwise the generation is sensitive to trivial differences such as
running `tests/scripts/generate_psa_tests.py` vs
`./tests/scripts/generate_psa_tests.py` vs an absolute path.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
SECP192R1 is declared in the PSA API specification, but it's an old
one that Mbed TLS doesn't support and even OpenSSL doesn't support.
We don't have test vectors for it. Just skip it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Asymmetric keys can't just be arbitrary byte strings: the public key
has to match the private key and the private key usually has
nontrivial constraints.
In order to have deterministic test data and not to rely on
cryptographic dependencies in the Python script, hard-code some test
keys.
In this commit, copy some test keys from test_suite_psa_crypto.data.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
New Python module intended to gather knowledge about key types and
cryptographic mechanisms, such as the ability to create test data for
a given key type and the determination of whether an algorithm is
compatible with a key type.
This commit just creates a class for knowledge about key types.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
At the moment it makes no difference, but it could if e.g. a new
algorithm was called 'foomask'.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
By default, exclude macros whose numerical value is not a valid member
of the semantic type (e.g. PSA_ALG_xxx_BASE is not itself an
algorithm, only an intermediate value used to construct others). But
do include them with include_intermediate=True, which
generate_psa_constants.py does.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This brings them in line with PSA Crypto API 1.0.0
PSA_ALG_AEAD_WITH_DEFAULT_TAG_LENGTH -> PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG
PSA_ALG_AEAD_WITH_TAG_LENGTH -> PSA_ALG_AEAD_WITH_SHORTENED_TAG
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
Declaring query_config() belongs with the query_config program, not in
ssl_test_lib.h, so move the declaration to a new header file
query_config.h.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Create a new source file for code that is shared between ssl_client2.c
and ssl_server2.c. This commit only creates the file; subsequent
commits will populate it.
Add it to the official build systems (make, cmake, VS).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Create a directory mbedtls_dev intended to contain various Python
module for use by Python scripts located anywhere in the Mbed TLS
source tree.
Move get_c_expression_values and its auxiliary functions into a new
Python module mbedtls_dev.c_build_helper.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Create a configuration option for autonomous random drivers, i.e. PSA
crypto drivers that provide a random generator, that have their own
entropy source and do not support injecting entropy from another
source.
This commit only creates the configuration option. Subsequent commits
will add the implementation and tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Simplify the guards on MBEDTLS_ERROR_C and MBEDTLS_ERROR_STRERROR_DUMMY.
No longer include superfluous headers and definition: platform.h is
only needed for MBEDTLS_ERROR_C; time_t is not needed at all.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Code under MBEDTLS_USE_PSA_CRYPTO define is PSA client
code intended to use key identifiers of type psa_key_id_t.
Thus the MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
configuration option is incompatible with
MBEDTLS_USE_PSA_CRYPTO.
State this in config.h and check_config.h.
As a consequence:
. remove MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER from
the full configuration, as MBEDTLS_USE_PSA_CRYPTO is
part of it.
. add a new component in all.sh to keep testing the
library when MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
is set.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
<string.h> is actually needed when MBEDTLS_ERROR_C is enabled and not
when only MBEDTLS_ERROR_STRERROR_DUMMY is enabled.
Fix#3866.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Provided a clearer comment for the description for ignoring
MBEDTLS_PSA_CRYPTO_CONFIG for full build setting.
Updated message output for test_psa_crypto_config_basic and
test_psa_want_ecdsa_disabled_software so it is more clear and
concise in what the test is doing. Removed inclusion of the
MBEDTLS_PSA_ACCEL_ALG_ECDSA since it should not have been used
for that particular tests.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
With the new feature MBEDTLS_PSA_CRYPTO_CONFIG, needed to
add support that when the feature is disabled, if there
are defines like MBEDTLS_ECDSA_C defined, then the PSA_WANT_
equivalent define is also enabled. This ensures the guards in
the library psa_crypto will work properly.
Also fixed an error return code in the driver wrapper for cipher
encrypt setup so it will properly pass unit tests.
Ensured config.py full works properly with the new
MBEDTLS_PSA_CRYPTO_CONFIG, it should not be set when the full
option is used.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Python should not be required for the build when the no_test target is
used. This commit adds the generated file to the source tree and the
check-generated-files script, and removes the generation from (c)make.
Fixes#3524
Signed-off-by: Cameron Nemo <cnemo@tutanota.com>
No obvious reason to not enable owner identifier encoding
in baremetal as multi-client support is expected to be needed
for some embedded platforms. Thus enable it.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Also adjusted the different makefiles accordingly.
Note: driver lifetime is currently statically defined in the header, but
this will be replaced in the future based on autogeneration of lifetime
values by a script (TBD)
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Enable key identifiers encoding owner identifier in
the full configuration.
With this change the unit tests on the full
configuration are failing. The following commit do
the necessary changes to the PSA code and test code
for the tests to pass with this configuration
option enabled.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
With PSA crypto v1.0.0, a volatile key identifier may
contain a owner identifier but no file is associated
to it. Thus rename the type psa_key_file_id_t to
mbedtls_svc_key_id_t to avoid a direct link with a
file when a key identifier involves an owner
identifier.
The new type name is prefixed by mbedtls to highlight
that the type is specific to Mbed TLS implementation
and not defined in the PSA Cryptography API
specification.
The svc in the type name stands for service as this
is the key identifier type from the point of view of
the service providing the Cryptography services.
The service can be completely provided by the present
library or partially in case of a multi-client service.
As a consequence rename as well:
. MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER to
MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
. PSA_KEY_ID_INIT to MBEDTLS_SVC_KEY_ID_INIT
. PSA_KEY_FILE_GET_KEY_ID to MBEDTLS_SVC_KEY_ID_GET_KEY_ID
. psa_key_file_id_make to mbedtls_svc_key_id_make
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
* development:
Update copyright notices to use Linux Foundation guidance
Undef ASSERT before defining it to ensure that no previous definition has sneaked in through included files.
Add ChangeLog entry for X.509 CN-type vulnerability
Improve documentation of cn in x509_crt_verify()
Fix comparison between different name types
Add test: DNS names should not match IP addresses
Remove obsolete buildbot reference in compat.sh
Fix misuse of printf in shell script
Fix added proxy command when IPv6 is used
Simplify test syntax
Fix logic error in setting client port
ssl-opt.sh: include test name in log files
ssl-opt.sh: remove old buildbot-specific condition
ssl-opt.sh: add proxy to all DTLS tests
Signed-off-by: Dan Handley <dan.handley@arm.com>
Currently the new component in all.sh fails because
mbedtls_ssl_cf_memcpy_offset() is not actually constant flow - this is on
purpose to be able to verify that the new test works.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
As a result, the copyright of contributors other than Arm is now
acknowledged, and the years of publishing are no longer tracked in the
source files.
Also remove the now-redundant lines declaring that the files are part of
MbedTLS.
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find files
find '(' -path './.git' -o -path './3rdparty' ')' -prune -o -type f -print | xargs sed -bi '
# Replace copyright attribution line
s/Copyright.*Arm.*/Copyright The Mbed TLS Contributors/I
# Remove redundant declaration and the preceding line
$!N
/This file is part of Mbed TLS/Id
P
D
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
This option allows to test the constant-flow nature of selected code, using
MemSan and the fundamental observation behind ctgrind that the set of
operations allowed on undefined memory by dynamic analysers is the same as the
set of operations allowed on secret data to avoid leaking it to a local
attacker via side channels, namely, any operation except branching and
dereferencing.
(This isn't the full story, as on some CPUs some instructions have variable
execution depending on the inputs, most notably division and on some cores
multiplication. However, testing that no branch or memory access depends on
secret data is already a good start.)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Rename PSA_DH_GROUP_xxx to PSA_DH_FAMILY_xxx, also rename
PSA_KEY_TYPE_GET_GROUP to PSA_KEY_TYPE_DH_GET_FAMILY and rename
psa_dh_group_t to psa_dh_family_t. Old defines are provided in
include/crypto_compat.h for backward compatibility.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Rename PSA_ECC_CURVE_xxx to PSA_ECC_FAMILY_xxx, also rename
PSA_KEY_TYPE_GET_CURVE to PSA_KEY_TYPE_ECC_GET_FAMILY and rename
psa_ecc_curve_t to psa_ecc_family_t. Old defines are provided in
include/crypto_compat.h for backward compatibility.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
In library source files, include "common.h", which takes care of
including "mbedtls/config.h" (or the alternative MBEDTLS_CONFIG_FILE)
and other things that are used throughout the library.
FROM=$'#if !defined(MBEDTLS_CONFIG_FILE)\n#include "mbedtls/config.h"\n#else\n#include MBEDTLS_CONFIG_FILE\n#endif' perl -i -0777 -pe 's~\Q$ENV{FROM}~#include "common.h"~' library/*.c 3rdparty/*/library/*.c scripts/data_files/error.fmt scripts/data_files/version_features.fmt
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When compiling library files under `3rdparty/`, the directory containing
the `.c` file that is being compiled is not the current directory, so
headers from the `library/` directory are not found. Fix this by
adding `.` to the include path.
This was not detected until now because as of this commit, no 3rdparty
source file requires a header under `library/`.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find scripts
find -path './.git' -prune -o '(' -name '*.gdb' -o -name '*.pl' -o -name '*.py' -o -name '*.sh' ')' -print | xargs sed -i '
# Remove Mbed TLS declaration if it occurs before the copyright line
1,/Copyright.*Arm/I {
/This file is part of/,$ {
/Copyright.*Arm/I! d
}
}
# Convert non-standard header in scripts/abi_check.py to the format used in the other scripts
/"""/,/"""/ {
# Cut copyright declaration
/Copyright.*Arm/I {
h
N
d
}
# Paste copyright declaration
/"""/ {
x
/./ {
s/^/# / # Add #
x # Replace orignal buffer with Copyright declaration
p # Print original buffer, insert newline
i\
s/.*// # Clear original buffer
}
x
}
}
/Copyright.*Arm/I {
# Print copyright declaration
p
# Read the two lines immediately following the copyright declaration
N
N
# Insert Apache header if it is missing
/SPDX/! {
i\
# SPDX-License-Identifier: Apache-2.0\
#\
# Licensed under the Apache License, Version 2.0 (the "License"); you may\
# not use this file except in compliance with the License.\
# You may obtain a copy of the License at\
#\
# http://www.apache.org/licenses/LICENSE-2.0\
#\
# Unless required by applicable law or agreed to in writing, software\
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT\
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\
# See the License for the specific language governing permissions and\
# limitations under the License.
# Insert Mbed TLS declaration if it is missing
/This file is part of/! i\
#\
# This file is part of Mbed TLS (https://tls.mbed.org)
}
# Clear copyright declaration from buffer
D
}
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
No effect so far, except on dependency checking, as the feature it's meant to
disable isn't implemented yet (so the descriptions in config.h and the
ChangeLog entry are anticipation for now).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This commit modifies the generate_psa_constants.py script to take as
input argument the location of where to write the
psa_constant_names_generated.c file.
For make-based build system, this commit does not change anything.
For CMake build system, this commit modifies the generation location of
that file to be inside the build directory and include it from there in
psa_constant_names.c
Fix#3365
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>
Add output of python3 version to output_env.sh.
Added in addition to the version of `python` as some
project's scripts try both executable names.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When generate_errors.pl was first written, there was no asn1.h. But
now there is one and it does not need any special treatment.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Keep it simple and mostly non-parametrizable for now.
A path to Visual Studio 2017 is hard-coded.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
1. The functions mbedtls_high_level_strerr and mbedtls_low_level_strerr
accept any error code and extract the high-level and low-level parts
respectively.
2. Documentation updates.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
Use "no_deprecated" both in the name of the configuration and in the
name of all.sh components, rather than a mixture of "no_deprecated"
and "non_deprecated".
Make all.sh component names more consistent.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Every boolean (defined/undefined) symbol is a "variant toggle" in some
sense, even enabling a module with MBEDTLS_xxx_C. What matters is
whether the symbol influences some other part of the system in such a
way that we need to run tests separately with and without it being
defined.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It's deprecated, but not otherwise counter-indicated for the full
config: it doesn't conflict with anything and enabling it doesn't make
testing harder (especially since it defaults off in compat.sh).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
MBEDTLS_DEPRECATED_REMOVED is turned off in full since we don't want
to turn off deprecated features. Also turn off
MBEDTLS_DEPRECATED_WARNING since we wouldn't want expected warnings:
we're aware that we're enabling deprecated modules.
Since MBEDTLS_DEPRECATED_WARNING is excluded from full, it doesn't
need to be excluded from baremetal explicitly.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It started out as be experimental, but it is now robust enough not to
break the rest, so there's no reason to leave it out.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Enable MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 in the full config. There's
no reason to keep it out. We weren't testing it at all on the CI.
Add a missing dependency on !MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 to
some test cases that either were testing that v3 extensions are only
accepted in v3 certificates, or where parsing returns a different
error when MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 is enabled.
Add a few positive and negative test cases with
MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 enabled.
Fix one test case with MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 where the
intended output of mbedtls_x509_crt_info had changed in
890819a597 but the test case was missed
because it was never executed.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The intended logic around MBEDTLS_xxx_ALT is to exclude them from full
because they require the alternative implementation of one or more
library functions, except that MBEDTLS_PLATFORM_xxx_ALT are different:
they're alternative implementations of a platform function and they
have a built-in default, so they should be included in full. Document
this.
Fix a bug whereby MBEDTLS_PLATFORM_xxx_ALT didn't catch symbols where
xxx contains an underscore. As a consequence,
MBEDTLS_PLATFORM_GMTIME_R_ALT and MBEDTLS_PLATFORM_NV_SEED_ALT are now
enabled in the full config. Explicitly exclude
MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT because it behaves like the
non-platform ones, requiring an extra build-time dependency.
Explicitly exclude MBEDTLS_PLATFORM_NV_SEED_ALT from baremetal
because it requires MBEDTLS_ENTROPY_NV_SEED, and likewise explicitly
unset it from builds that unset MBEDTLS_ENTROPY_NV_SEED.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The presence of these markers in the original code was helpful to me in
figuring out that this portion of the code is auto-generated.
Therefore, I think those are useful and should be present.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
- Use switch case instead of loop to generate faster code
- Add #if defined to address compiler error
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
Problem
-------
mbedtls_strerror is a utility function which converts an mbedTLS error code
into a human readable string. It requires the caller to allocate a buffer every
time an error code needs to be converted to a string. It is an overkill and a
waste of RAM for resource constrained microcontrollers - where the most common
use case is to use these strings for logging.
Solution
--------
The proposed commit adds two functions:
* const char * mbedtls_high_level_strerr( int error_code );
* const char * mbedtls_low_level_strerr( int error_code );
The above two functions convert the high level and low level parts of an mbedTLS
error code to human readable strings. They return a const pointer to an
unmodifiable string which is not supposed to be modified by the caller and only
to be used for logging purposes. The caller no longer needs to allocate a
buffer.
Backward Compatibility
----------------------
The proposed change is completely backward compatible as it does not change
the existing mbedtls_strerror function and ensures that it continues to behave
the same way.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
Don't mix Windows and Unix line endings, it's the worst of both worlds.
Update the Visual Studio templates and regenerate the generated files.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
