Context:
The CID draft does not require that the length of CIDs used for incoming
records must not change in the course of a connection. Since the record
header does not contain a length field for the CID, this means that if
CIDs of varying lengths are used, the CID length must be inferred from
other aspects of the record header (such as the epoch) and/or by means
outside of the protocol, e.g. by coding its length in the CID itself.
Inferring the CID length from the record's epoch is theoretically possible
in DTLS 1.2, but it requires the information about the epoch to be present
even if the epoch is no longer used: That's because one should silently drop
records from old epochs, but not the entire datagrams to which they belong
(there might be entire flights in a single datagram, including a change of
epoch); however, in order to do so, one needs to parse the record's content
length, the position of which is only known once the CID length for the epoch
is known. In conclusion, it puts a significant burden on the implementation
to infer the CID length from the record epoch, which moreover mangles record
processing with the high-level logic of the protocol (determining which epochs
are in use in which flights, when they are changed, etc. -- this would normally
determine when we drop epochs).
Moreover, with DTLS 1.3, CIDs are no longer uniquely associated to epochs,
but every epoch may use a set of CIDs of varying lengths -- in that case,
it's even theoretically impossible to do record header parsing based on
the epoch configuration only.
We must therefore seek a way for standalone record header parsing, which
means that we must either (a) fix the CID lengths for incoming records,
or (b) allow the application-code to configure a callback to implement
an application-specific CID parsing which would somehow infer the length
of the CID from the CID itself.
Supporting multiple lengths for incoming CIDs significantly increases
complexity while, on the other hand, the restriction to a fixed CID length
for incoming CIDs (which the application controls - in contrast to the
lengths of the CIDs used when writing messages to the peer) doesn't
appear to severely limit the usefulness of the CID extension.
Therefore, the initial implementation of the CID feature will require
a fixed length for incoming CIDs, which is what this commit enforces,
in the following way:
In order to avoid a change of API in case support for variable lengths
CIDs shall be added at some point, we keep mbedtls_ssl_set_cid(), which
includes a CID length parameter, but add a new API mbedtls_ssl_conf_cid_len()
which applies to an SSL configuration, and which fixes the CID length that
any call to mbetls_ssl_set_cid() which applies to an SSL context that is bound
to the given SSL configuration must use.
While this creates a slight redundancy of parameters, it allows to
potentially add an API like mbedtls_ssl_conf_cid_len_cb() later which
could allow users to register a callback which dynamically infers the
length of a CID at record header parsing time, without changing the
rest of the API.
The function mbedtls_ssl_hdr_len() returns the length of the record
header (so far: always 13 Bytes for DTLS, and always 5 Bytes for TLS).
With the introduction of the CID extension, the lengths of record
headers depends on whether the records are incoming or outgoing,
and also on the current transform.
Preparing for this, this commit splits mbedtls_ssl_hdr_len() in two
-- so far unmodified -- functions mbedtls_ssl_in_hdr_len() and
mbedtls_ssl_out_hdr_len() and replaces the uses of mbedtls_ssl_hdr_len()
according to whether they are about incoming or outgoing records.
There is no need to change the signature of mbedtls_ssl_{in/out}_hdr_len()
in preparation for its dependency on the currently active transform,
since the SSL context is passed as an argument, and the currently
active transform is referenced from that.
With the introduction of the CID feature, the stack needs to be able
to handle a change of record content type during record protection,
which in particular means that the record content type check will
need to move or be duplicated.
This commit introduces a tiny static helper function which checks
the validity of record content types, which hopefully makes it
easier to subsequently move or duplicate this check.
With the introduction of the CID extension, the record content type
may change during decryption; we must therefore re-consider every
record content type check that happens before decryption, and either
move or duplicate it to ensure it also applies to records whose
real content type is only revealed during decryption.
This commit does this for the silent dropping of unexpected
ApplicationData records in DTLS. Previously, this was caught
in ssl_parse_record_header(), returning
MBEDTLS_ERR_SSL_UNEXPECTED_RECORD which in ssl_get_next_record()
would lead to silent skipping of the record.
When using CID, this check wouldn't trigger e.g. when delayed
encrypted ApplicationData records come on a CID-based connection
during a renegotiation.
This commit moves the check to mbedtls_ssl_handle_message_type()
and returns MBEDTLS_ERR_SSL_NON_FATAL if it triggers, which leads
so silent skipover in the caller mbedtls_ssl_read_record().
The SSL context structure mbedtls_ssl_context contains several pointers
ssl->in_hdr, ssl->in_len, ssl->in_iv, ssl->in_msg pointing to various
parts of the record header in an incoming record, and they are setup
in the static function ssl_update_in_pointers() based on the _expected_
transform for the next incoming record.
In particular, the pointer ssl->in_msg is set to where the record plaintext
should reside after record decryption, and an assertion double-checks this
after each call to ssl_decrypt_buf().
This commit removes the dependency of ssl_update_in_pointers() on the
expected incoming transform by setting ssl->in_msg to ssl->in_iv --
the beginning of the record content (potentially including the IV) --
and adjusting ssl->in_msg after calling ssl_decrypt_buf() on a protected
record.
Care has to be taken to not load ssl->in_msg before calling
mbedtls_ssl_read_record(), then, which was previously the
case in ssl_parse_server_hello(); the commit fixes that.
If a record exhibits an invalid feature only after successful
authenticated decryption, this is a protocol violation by the
peer and should hence lead to connection failure. The previous
code, however, would silently ignore such records. This commit
fixes this.
So far, the only case to which this applies is the non-acceptance
of empty non-AD records in TLS 1.2. With the present commit, such
records lead to connection failure, while previously, they were
silently ignored.
With the introduction of the Connection ID extension (or TLS 1.3),
this will also apply to records whose real content type -- which
is only revealed during authenticated decryption -- is invalid.
In contrast to other aspects of the Connection ID extension,
the CID-based additional data for MAC computations differs from
the non-CID case even if the CID length is 0, because it
includes the CID length.
Quoting the CID draft 04:
- Block Ciphers:
MAC(MAC_write_key, seq_num +
tls12_cid + // New input
DTLSPlaintext.version +
cid + // New input
cid_length + // New input
length_of_DTLSInnerPlaintext + // New input
DTLSInnerPlaintext.content + // New input
DTLSInnerPlaintext.real_type + // New input
DTLSInnerPlaintext.zeros // New input
)
And similar for AEAD and Encrypt-then-MAC.
This commit temporarily comments the copying of the negotiated CIDs
into the established ::mbedtls_ssl_transform in mbedtls_ssl_derive_keys()
until the CID feature has been fully implemented.
While mbedtls_ssl_decrypt_buf() and mbedtls_ssl_encrypt_buf() do
support CID-based record protection by now and can be unit tested,
the following two changes in the rest of the stack are still missing
before CID-based record protection can be integrated:
- Parsing of CIDs in incoming records.
- Allowing the new CID record content type for incoming records.
- Dealing with a change of record content type during record
decryption.
Further, since mbedtls_ssl_get_peer_cid() judges the use of CIDs by
the CID fields in the currently transforms, this change also requires
temporarily disabling some grepping for ssl_client2 / ssl_server2
debug output in ssl-opt.sh.
Part of the record encryption/decryption tests is to gradually
increase the space available at the front and/or at the back of
a record and observe when encryption starts to succeed. If exactly
one of the two parameters is varied at a time, the expectation is
that encryption will continue to succeed once it has started
succeeding (that's not true if both pre- and post-space are varied
at the same time).
Moreover, previously the test would take turns when choosing which
transform should be used for encryption, and which for decryption.
With the introduction of the CID feaature, this switching of transforms
doesn't align with the expectation of eventual success of the encryption,
since the overhead of encryption might be different for the parties,
because both parties may use different CIDs for their outgoing records.
This commit modifies the tests to not take turns between transforms,
but to always use the same transforms for encryption and decryption
during a single round of the test.
This commit modifies ssl_decrypt_buf() and ssl_encrypt_buf()
to include the CID into authentication data during record
protection.
It does not yet implement the new DTLSInnerPlaintext format
from https://tools.ietf.org/html/draft-ietf-tls-dtls-connection-id-04
This commit adds a static array `cid` to the internal structure
`mbedtls_record` representing encrypted and decrypted TLS records.
The expected evolution of state of this field is as follows:
- When handling an incoming record, the caller of `mbedtls_decrypt_buf()`
has to make sure the CID array field in `mbedtls_record` has been
properly set. Concretely, it will be copied from the CID from the record
header during record parsing.
- During decryption in `mbedtls_decrypt_buf()`, the transforms
incoming CID is compared to the CID in the `mbedtls_record`
structure representing the record to be decrypted.
- For an outgoing TLS record, the caller of `mbedtls_encrypt_buf()`
clears the CID in the `mbedtls_record` structure.
- During encryption in `mbedtls_encrypt_buf()`, the CID field in
`mbedtls_record` will be copied from the out-CID in the transform.
These will be copied from the CID fields in mbedtls_ssl_handshake_params
(outgoing CID) and mbedtls_ssl_context (incoming CID) when the transformation
is set up at the end of the handshake.
