Remaining hits seem to be hex data, certificates,
and other miscellaneous exceptions.
List generated by running codespell -w -L
keypair,Keypair,KeyPair,keyPair,ciph,nd
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Remove no_supported HMAC generate/import tests when !PSA_KEY_TYPE_HMAC as HMAC key creation works regardless of PSA_WANT_KEY_TYPE_HMAC.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
component_test_cmake_out_of_source was running the ssl-opt.sh test case
"Fallback SCSV: beginning of list", but this test case was removed in Mbed
TLS 3.0, so ssl-opt.sh was running nothing, which is not an effective test.
In 2.x, the test case was chosen because it uses an additional auxiliary
program tests/scripts/tcp_client.pl. This auxiliary program is no longer
used. So instead, run at least one test case that's sure to exist.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
`PSA_ALG_AEAD_WITH_SHORTENED_TAG(aead_alg, len) == aead_alg` when
`len == PSA_AEAD_TAG_LENGTH(aead_alg)`. So skip this case when testing
the printing of constants.
This fixes one test case due to the way arguments of
`PSA_ALG_AEAD_WITH_SHORTENED_TAG` are enumerated (all algorithms are tested
for a value of `len` which isn't problematic, and all values of `len` are
tested for one algorithm).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
There's nothing wrong with ECC keys on Brainpool curves,
but operations with them are very slow. So we only exercise them
with a single algorithm, not with all possible hashes. We do
exercise other curves with all algorithms so test coverage is
perfectly adequate like this.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
RSA-OAEP requires the key to be larger than a function of the hash size.
Ideally such combinations would be detected as a key/algorithm
incompatibility. However key/algorithm compatibility is currently tested
between the key type and the algorithm without considering the key size, and
this is inconvenient to change. So as a workaround, dispense
OAEP-with-too-small-hash from exercising, without including it in the
automatic operation-failure test generation.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In key read tests, add usage flags that are suitable for the key type and
algorithm. This way, the call to exercise_key() in the test not only checks
that exporting the key is possible, but also that operations on the key are
possible.
This triggers a number of failures in edge cases where the generator
generates combinations that are not valid, which will be fixed in subsequent
commits.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This currently makes all the descriptions unambiguous even when truncated at
66 characters, as the unit test framework does.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The output of generate_psa_tests.py is almost unchanged: the differences are
only spaces after commas (now consistently omitted).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When generating storage format tests, pass usage flags around as a list, and
format them as the last thing.
In Storagekey(), simplify the addition of implicit usage flags: this no
longer requires parsing.
The output is unchanged.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In the generated storage format test cases, cover all supported
algorithms for each key type. This is a step towards exercising
the key with all the algorithms it supports; a subsequent commit
will generate a policy that permits the specified algorithms.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Use the new generic is_public method.
Impact on generated cases: there are new HMAC test cases for SIGN_HASH. It
was a bug that these test cases were previously not generated.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
`curves.pl` (invoked by `all.sh test_depends_curves`, and
`all.sh test_depends_curves_psa`) currently runs two series of tests:
* For each curve, test with only that curve enabled.
* For each curve, test with all curves but that one.
Originally this script was introduced to validate test dependencies, and for
that all-but-one gives better results because it handles test cases that
require multiple curves. Then we extended the script to also test with a
single curve, which matches many real-world setups and catches some product
bugs. Single-curve testing also validates test dependencies in a more
limited way.
Remove all-but-one curve testing, because it doesn't add much to the test
coverage. Mainly, this means that we now won't detect if a test case
declares two curve dependencies but actually also depends on a third. This
is an acceptable loss.
The trigger for removing all-but-one curve testing is that this will make
the job take only about half as long, and the length of the job was a bit of
a problem. Resolves#5729.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
component_test_CID_no_debug was added specifically to be a non-regression
test for https://github.com/Mbed-TLS/mbedtls/issues/3998. Running compat.sh
in the newly introduced config-ccm-psk-dtls1_2.h is also a non-regression
test for that bug. Therefore component_test_CID_no_debug is redundant for
its primary purpose.
Of course every configuration is different, but the additional coverage from
component_test_CID_no_debug is minimal, unlike config-ccm-psk-dtls1_2.h
which is a plausible real-world configuration.
In mbedtls-2.28, component_test_CID_no_debug was never added, and running
the unit tests in that configuration does not trigger the #3998 bug, only
compat.sh does. So, rather than backport component_test_CID_no_debug to
2.28.2, I am removing it from 3.2.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It no longer makes sense, either in -e or -f: those ciphersuites have
been removed anyway.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
mbedtls/mbedtls_config.h (formerly mbedtls/config.h) used to be included
directly in many places, so we wanted to test that all of these places
allowed the MBEDTLS_CONFIG_FILE override. Now mbedtls/mbedtls_config.h is
only included via build_info.h, so this is not relevant anymore.
It is no longer particularly useful to test MBEDTLS_CONFIG_FILE with the
full config, but it isn't harmful either, so keep it that way.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When running check-generated-files in update mode, all generated files were
regenerated. As a consequence,
```
tests/scripts/check-generated-files.sh -u && make
```
always caused most of the code to be rebuilt. Now, if a file hasn't changed,
preserve its original modification time (and other metadata), so the command
above doesn't rebuild anything that has actually not changed.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
For TLS 1.3 tests, do not force TLS 1.3
version on client to play the negotiation
game whenever possible.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This implies that when both TLS 1.2 and TLS 1.3
are included in the build all the TLS 1.2 tests
using the default configuration now go through
a version negotiation on the client side.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rename ssl_cli.c and ssl_srv.c to reflect the fact
that they are TLS 1.2 specific now. Align there new
names with the TLS 1.3 ones.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add all of the group pairs for hrr cases
Re-order some parameters
Change-Id: Id7e131d1ed4279bbd586613800df7bd87dfa4c54
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Change run title
Remove dedicate ciphersuite and sig alg
Update test cases
Change-Id: Ic0e9adf56062e744f7bafbc6bb562baeaafd89f0
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Integrate two options into one
Use one dedicate cipher suite TLS_AES_256_GCM_SHA384
Use on dedicate signature algorithm ecdsa_secp384r1_sha384
Change-Id: Icbe39b985e1942edc4b1e37ce3352eed4f316ab7
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
Provide an additional pair of #defines, MBEDTLS_SHA512_USE_A64_CRYPTO_IF_PRESENT
and MBEDTLS_SHA512_USE_A64_CRYPTO_ONLY. At most one of them may be
specified. If used, it is necessary to compile with -march=armv8.2-a+sha3.
The MBEDTLS_SHA512_PROCESS_ALT and MBEDTLS_SHA512_ALT mechanisms
continue to work, and are mutually exclusive with SHA512_USE_A64_CRYPTO.
There should be minimal code size impact if no A64_CRYPTO option is set.
The SHA-512 implementation was originally written by Simon Tatham for PuTTY,
under the MIT licence; dual-licensed as Apache 2 with his kind permission.
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
The test suite test_suite_psa_crypto_op_fail now runs a large number
of automatically generated test cases which attempt to perform a
one-shot operation or to set up a multi-part operation with invalid
parameters. The following cases are fully covered (based on the
enumeration of valid algorithms and key types):
* An algorithm is not supported.
* The key type is not compatible with the algorithm (for operations
that use a key).
* The algorithm is not compatible for the operation.
Some test functions allow the library to return PSA_ERROR_NOT_SUPPORTED
where the test code generator expects PSA_ERROR_INVALID_ARGUMENT or vice
versa. This may be refined in the future.
Some corner cases with algorithms combining a key agreement with a key
derivation are not handled properly. This will be fixed in follow-up
commits.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test that hash operation functions fail when given a hash algorithm
that is not supported or an algorithm that is not a hash.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The new test suite psa_crypto_op_fail is intended for systematically
generated test cases that ensure that cryptographic operations with
invalid parameters fail as expected. I intend invalid parameters to
cover things like an invalid algorithm, an algorithm that is
incompatible with the operation, a key type that is incompatible with
the algorithm, etc.
This commit just creates the infrastructure. Subsequent commits will
add data generation and test code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Generate "with implication" and "without implication" usage test cases
separately.
The set of generated test cases is unchanged. The order, and the description
of "with implication" test cases, changes.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When doing builds with PSA enabled or with debug traces enabled, convey this
in $MBEDTLS_TEST_CONFIGURATION and in the terminal logs.
This fixes a bug that the outcome file did not distinguish entries from
test cases run in a reference configuration with or without PSA.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
User-visible changes:
* With no argument, configurations are now tested in a deterministic order.
* When given arguments, configurations are now tested in the order given.
* When given arguments, if the same configuration is passed multiple times,
it will now be tested multiple times.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
To be able to test utility programs for an absence of time.h, we need a
baremetal config that is not crypto only. Add one.
Signed-off-by: Daniel Axtens <dja@axtens.net>
baremetal compiles should not include time.h, as MBEDTLS_HAVE_TIME is
undefined. To test this, provide an overriding include directory that
has a time.h which throws a meaningful error if included.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Running mypy was optional for a transition period when it wasn't installed
on the CI. Now that it is, make it mandatory, to avoid silently skipping an
expected check if mypy doesn't work for some reason.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Many test cases in ssl-opt.sh need error messages (MBEDTLS_ERROR_C) or SSL
traces (MBEDTLS_DEBUG_C). Some sample configurations don't include these
options. When running ssl-opt.sh on those configurations, enable the
required options. They must be listed in the config*.h file, commented out.
Run ssl-opt in the following configurations with debug options:
ccm-psk-tls1_2, ccm-psk-dtls1_2, suite-b.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
1. Copy config-ccm-psk-tls1_2.h
2. Add DTLS support
3. Add some TLS and DTLS features that are useful in low-bandwidth,
low-reliability networks
4. Reduce the SSL buffer to a very small size
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Expand abi_check.py to look for backward incompatibilities not only in
the interface exposed to application code (and to some extent driver
code), but also to the interface exposed via the storage format, which
is relevant when upgrading Mbed TLS on a device with a PSA keystore.
Strictly speaking, the storage format checks look for regressions in
the automatically generated storage format test data. Incompatible
changes that are not covered by the generated tests will also not be
covered by the interface checker.
A known defect in this commit is that the --brief output is not brief
for storage format checks.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Provide an additional pair of #defines, MBEDTLS_SHA256_USE_A64_CRYPTO_IF_PRESENT
and MBEDTLS_SHA256_USE_A64_CRYPTO_ONLY. At most one of them may be
specified. If used, it is necessary to compile with -march=armv8-a+crypto.
The MBEDTLS_SHA256_PROCESS_ALT and MBEDTLS_SHA256_ALT mechanisms
continue to work, and are mutually exclusive with A64_CRYPTO.
There should be minimal code size impact if no A64_CRYPTO option is set.
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
The race condition mentioned in the previous commit
"Stop CMake out of source tests running on 16.04"
has also been observed with test_cmake_as_subdirectory and can presumably
happen with test_cmake_as_package and test_cmake_as_package_install as well.
So skip all of these components on Ubuntu 16.04.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Run some of the test configs twice, enabling MBEDTLS_USE_PSA_CRYPTO
and MBEDTLS_PSA_CRYPTO_C in one of the runs.
Add relevant comments in these configs.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
psa_aead_encrypt_setup() and psa_aead_decrypt_setup() were returning
PSA_ERROR_INVALID_ARGUMENT, while the same failed checks were producing
PSA_ERROR_NOT_SUPPORTED if they happened in psa_aead_encrypt() or
psa_aead_decrypt().
The PSA Crypto API 1.1 spec will specify PSA_ERROR_INVALID_ARGUMENT
in the case that the supplied algorithm is not an AEAD one.
Also move these shared checks to a helper function, to reduce code
duplication and ensure that the functions remain in sync.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
