Although SHA512 is currently required to enable SHA384, this
is expected to change in the future. This commit is an
intermediate step towards fully separating SHA384 and SHA512.
check_config is the only module which enforces that SHA512 is
enabled together with SHA384.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Made a mistake when copy-pasting and put the guard in the wrong place.
Fix that by moving the compile time guard.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
This function was introduced before ssl_test_common_source.c and so the
function is replicated in both ssl_client2.c and ssl_server2.c. Move
the function to ssl_test_common_source.c to avoid duplication.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
The new compile-time option MBEDTLS_X509_REMOVE_INFO removes various
X.509 debugging strings and functionality, including
```
mbedtls_x509_crt_verify_info()
```
which ssl_client2.c and ssl_server2.c use to print human readable
descriptions of X.509 verification failure conditions. Those
conditions are also grepped for in numerous ssl-opt.sh tests.
Instead of disabling those tests if MBEDTLS_X509_REMOVE_INFO is set,
this commit essentially moves mbedtls_x509_crt_verify_info() to
ssl_client2.c and ssl_server2.c. However, instead of just copy-pasting
the code from x509_crt.c, the following approach is used:
A macro MBEDTLS_X509_CRT_ERROR_INFO_LIST is introduced which for each
verification failure condition invokes a user-defined macro X509_CRT_ERROR_INFO
with (a) the numerical error code, (b) the string presentation of the
corresponding error macro, (c) the info string for the error condition.
This macro can thus be used to generate code which somehow iterates over
the verifiation failure conditions, but the list of error conditions and
information strings is nowhere duplicated.
This is then used to re-implement mbedtls_x509_crt_verify_info() in
x509_crt.c and to provide a functionally equivalent (yet slightly different)
version in ssl_client2.c and ssl_server2.c in case MBEDTLS_X509_REMOVE_INFO
is set.
This way, little changes to ssl-opt.sh will be necessary in case
MBEDTLS_X509_REMOVE_INFO is set because the info strings for the
verification failure conditions will be printed regardless of whether
MBEDTLS_X509_REMOVE_INFO is set or not.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The introduction of positive options to control the presence
of pre-existing functionality breaks the build for users of
handwritten configurations.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Introduce MBEDTLS_X509_INFO to indicate the availability of the
mbedtls_x509_*_info() function and closely related APIs. When this is
not defined, also omit name and description from
mbedtls_oid_descriptor_t, and omit OID arrays, macros, and types that
are entirely unused. This saves several KB of code space.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Signed-off-by: Chris Jones <christopher.jones@arm.com>
`entropy_poll.h` and `md_wrap.h` were still being used in some of the
example programs. As these headers are now internal, remove their
references and replace them with publicly available functions.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Revert changes introduced in 50518f4195
as it is now clear that these headers are internal without the
`*_internal.h` suffix.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Simple find and replace using `#include (<|")mbedtls/(.*)_internal.h(>|")`
and `#include $1$2_internal.h$3`.
Also re-generated visualc files by running
`scripts/generate_visualc_files.pl`.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
The PSA subsystem may consume global resources. It currently doesn't
consume any heap when no keys are registered, but it may do so in the
future. It does consume mutexes, which are reported as leaks when
mutex usage checking is enabled.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test hook failure checks may print information to stdout, which messes
up the usage of query_config mode. Nothing interesting happens in
query_config mode anyway, so that's no loss.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Create utility functions to set up test hooks and report errors that
the test hooks might detect. Call them in ssl_client2 and ssl_server2.
Test hooks are potentially enabled by compiling with
MBEDTLS_TEST_HOOKS.
This commit only sets up the functions. It doesn't make them do
anything yet.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The SSL test programs can now use the PSA RNG, and the PSA RNG can use
an external RNG. The build conditions hadn't been updated and didn't
cover the case when MBEDTLS_TEST_USE_PSA_CRYPTO_RNG is enabled but
MBEDTLS_USE_PSA_CRYPTO is disabled. Fix this.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move the call to destroy the PSK to before freeing the SSL session
data and calling rng_free(), which deinitializes the PSA subsystem.
This particular ordering was chosen to make the ssl_client2 more
similar to ssl_server2. This fixes the client failing on the
psa_destroy_key() call in `ssl-opt.sh -f 'opaque psk on client'`.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The SSL test programs can now use mbedtls_psa_get_random() rather than
entropy+DRBG as a random generator. This happens if
the configuration option MBEDTLS_USE_PSA_CRYPTO is enabled, or if
MBEDTLS_TEST_USE_PSA_CRYPTO_RNG is set at build time.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
With MBEDTLS_USE_PSA_CRYPTO, some of the randomness for the TLS
connection is generated inside the PSA crypto subsystem, which has no
reproducible mode. Whether there is a nonzero amount of randomness
coming from inside the PSA subsystem rather than from the random
generator set by mbedtls_ssl_conf_rng() depends on the choice of
cipher suite and other connection parameters as well as the level of
support for MBEDTLS_USE_PSA_CRYPTO. Rather than give unreliable
results, conservatively abort with a clear error message.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move the declaration of the functions needed to use the test
implementation of mbedtls_psa_external_get_random() to a new header
file. Before, they were declared in
tests/include/test/psa_crypto_helpers.h, but this header file can't be
included in sample programs because it also includes headers from the
library directory which is not on the include path for sample
programs.
This fixes the build of the sample programs when
MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG and MBEDTLS_USE_PSA_CRYPTO are
enabled.
Move the implementation of the functions to a separate .c file as
well. This isn't strictly necessary, but makes the structure of the
source code easier to understand.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Currently, MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG is tested with a dummy
insecure implementation of mbedtls_psa_external_get_random. This
function needs to be explicitly enabled at runtime. This needs to
happen when the PSA external RNG is used, which currently is the case
in SSL test programs only when MBEDTLS_USE_PSA_CRYPTO is enabled.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Support HMAC_DRBG in ssl_client2 and ssl_server2, in addition to
CTR_DRBG. CTR_DRBG is still used if present, but it's now possible to
run the SSL test programs with CTR_DRBG disabled.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In ssl_client2 and ssl_server2, to generate random data, go through a
level of indirection provided by ssl_test_lib. This way the programs
don't depend on a particular choice of RNG implementation, and only
ssl_test_lib.{h,c} explicitly reference CTR_DRBG.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit is deliberately arranged to minimize code changes.
Subsequent commits will clean up the resulting code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In preparation for unifying the common RNG-related code of ssl_client2
and ssl_server2, make it possible to copy-paste that code out of these
programs' main() functions:
* Replaces reads of the non-unifiable structure opt by reads of a
separate variable.
* Replace references to the local variable rng by a pointer.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Group the random generation context (entropy and DRBG) into a struct.
This is in preparation for unifying the common RNG-related code of
ssl_client2 and ssl_server2, then generalizing that code to support
methods other than entropy+CTR_DRBG.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Declaring query_config() belongs with the query_config program, not in
ssl_test_lib.h, so move the declaration to a new header file
query_config.h.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move from ssl_*2.c to ssl_test_lib.c:
* Functions that have exactly identical definitions in the two
programs, and that don't reference the global variable opt which
has a different type in the client and in the server. Also declare
these functions in ssl_test_lib.h.
Move from ssl_*2.c to ssl_test_common_source.c:
* Functions that have exactly identical definitions in the two
programs, but access fields of the global variable opt which
has a different structure type in the client and in the server.
* The array ssl_sig_hashes_for_test, because its type is incomplete.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Adjust whitespace and comments in code of ssl_client2.c and
ssl_server2.c that was almost identical to make these chunks exactly
identical.
Make the common functions non-static.
This is in preparation for moving the common code to ssl_test_lib.c.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move from ssl_*2.c to ssl_test_lib.h:
* Include directives for headers included by both programs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move from ssl_*2.c to ssl_test_lib.h:
* The inclusion of the config header file (identical).
* The fallback definitions of platform functions (almost identical:
server2 also had snprintf and the order and whitespace was slightly
different).
* The compilation guards checking that required options are
enabled (tweaked to make them common, with MBEDTLS_SSL_{CLI,SRV}_C
separated out).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Create a new source file for code that is shared between ssl_client2.c
and ssl_server2.c, but cannot be compiled separately and instead needs
to be #include'd in each program that uses it.
This is for code that references macros or types that are defined
differently in the two programs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Create a new source file for code that is shared between ssl_client2.c
and ssl_server2.c. This commit only creates the file; subsequent
commits will populate it.
Add it to the official build systems (make, cmake, VS).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_ssl_conf_dtls_srtp_protection_profiles stores the pointer to the
profiles in the configuration.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
In cmake version < 3.0, the SOURCES property on targets cannot be
modified after the target is defined. There are several instances in
the code that were using `target_properties()`, which is not available
in the older versions of cmake. Unfortunately, the workaround in #3801
(381c1078fc) assumes that this SOURCES property can be modified.
Work around this by building up any necessary sources before declaring
the target. This is more awkward, but needed to continue to be able to
support the old versions of cmake.
Fixes#3788.
Signed-off-by: David Brown <david.brown@linaro.org>
PSA and SSL programs are PSA clients thus should use
psa_key_id_t as the type for key identifiers, not
mbedtls_svc_key_id_t.
As a consequence, PSA, ssl_server2 and ssl_client2
programs cannot compile and must not be compiled if
MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER is defined.
Thus, add MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
compilation guard to those programs.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Define psa_key_handle_t to be equal to
mbedtls_svc_key_id_t. Make the handle of a persistent
key be equal to its key identifier. For volatile keys,
make the key handle equal to the volatile key
identifier of the created volatile key.
The unit tests are modified just to make them compile
not to make them run successfully. They are fixed in
the subsequent commits.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
CMake versions less than 3.0 do not support the `target_sources`
command. In order to be able to support v2.8.12.2 of cmake, directly
set the SOURCES property instead of using the target_sources command.
A future patch could reverse this, if the project decides to forgo
support for cmake versions less than 3.0.
Fixes#3801
Signed-off-by: David Brown <david.brown@linaro.org>
Use the export keys functionality, to call the public API
`mbedtls_ssl_tls_prf()`, and remove the function
`mbedtls_ssl_get_dtls_srtp_key_material()`.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
Fix compilation errors when `MBEDTLS_DTLS_SRTP` not set
1. Add file missed in previous commmit.
2. In sample applications, set `DFL_FORCE_SRTP_PROFILE` to 0.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
1. Set correct mki from the `use_srtp` extension.
2. Use mki value received from the client as the mki used by server.
3. Use `mbedtls_ssl_dtls_srtp_set_mki_value()` as a client API only.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
Add dtls-srtp to `ssl_client2` and `ssl_server2` examples,
for reference and for allowing in tests.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
In `read_next_b64_code()`, the result of fgetc() is stored into a char,
but later compared against EOF, which is generally -1. On platforms
where char is unsigned, this generates a compiler warning/error that the
comparison will never be true (causing a build failure). The value will
never match, with the function ultimately bailing with a "Too many bad
symbols are detected" error.
On platforms with signed char, EOF is detected, but a file containing a
0xFF character will causes a premature end of file exit of the loop.
Fix this by changing the result to an int.
Fixes#3794.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: David Brown <david.brown@linaro.org>
Allows required targets to have prefixes added to them, so that external
projects can avoid target names clashing.
Signed-off-by: Raef Coles <raef.coles@arm.com>
If MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED is defined, then the return value will be overridden by the extra code running after the removed return instruction.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
The extra code running after the removed return instruction should not generate any output. Only the read config value must be printed.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
As a result, the copyright of contributors other than Arm is now
acknowledged, and the years of publishing are no longer tracked in the
source files.
Also remove the now-redundant lines declaring that the files are part of
MbedTLS.
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find files
find '(' -path './.git' -o -path './3rdparty' ')' -prune -o -type f -print | xargs sed -bi '
# Replace copyright attribution line
s/Copyright.*Arm.*/Copyright The Mbed TLS Contributors/I
# Remove redundant declaration and the preceding line
$!N
/This file is part of Mbed TLS/Id
P
D
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
The example application programs/ssl/ssl_client2 allows the
configuration of a client CRT through the parameters
- crt_file, key_file
However, password protected key files are not supported.
This commit adds a new command line option
- key_pwd
which allow to specify a password for the key file specified
in the key_file parameter.
The example application programs/ssl/ssl_server2 allows the
configuration of up to two CRTs through the command line
parameters
- crt_file, key_file
- crt_file2, key_file2.
However, password protected key files are not supported.
This commit adds command line options
- key_pwd
- key_pwd2
which allow to specify passwords for the key files specified
in key_file and key_file2, respectively.
Use list of executables to:
- factorize the code to define executables
- highlight the similarities and differences of the executable definitions
- avoid list duplication
Use alphabetic order for executables in lists.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The path to source files were relative which triggered
warnings when generating the build system.
Move to absolute paths based on CMAKE_CURRENT_SOURCE_DIR.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
1. When `ssl_server2` export key functionality fails,
don't exit the server, but reset it, to have the
server recover for next connection.
2. Add text filters for `export keys functionality` test in ssl-opt.sh
to check for additional output, to verify if the export suceeded.
This was discovered in the `ssl-opt.sh` script, where the server exited,
before the test tried to kill the server priocess, resulting in a
`kill: No such process` message.
Fixes#2662
Signed-off-by: Ron Eldor <Ron.Eldor@arm.com>
Don't use string literals that are longer than 4095 bytes, which is
the minimum that C99 compilers are required to support. Compilers are
extremely likely to support longer literals, but `gcc -std=c99 -pedantic`
complains.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Since the server might want to have a different maximum fragment length
for the outgoing messages than the negotiated one - introduce a new way of
computing it. This commit also adds additional ssl-opt.sh tests ensuring
that the maximum fragment lengths are set as expected.
mbedtls_ssl_get_max_frag_len() is now a deprecated function,
being an alias to mbedtls_ssl_get_output_max_frag_len(). The behaviour
of this function is the same as before.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Merge the latest state of the target branch (mbedtls/development) into the
pull request to merge mbed-crypto into mbedtls.
Conflicts:
* ChangeLog: add/add conflict. Resolve by using the usual section order.
Rename identifiers containing double-underscore (`__`) to avoid `__`.
The reason to avoid double-underscore is that all identifiers
containing double-underscore are reserved in C++. Rename all such
identifiers that appear in any public header, including ssl_internal.h
which is in principle private but in practice is installed with the
public headers.
This commit makes check-names.sh pass.
```
perl -i -pe 's/\bMBEDTLS_SSL__ECP_RESTARTABLE\b/MBEDTLS_SSL_ECP_RESTARTABLE_ENABLED/g; s/\bMBEDTLS_KEY_EXCHANGE_(_\w+)_(_\w+)\b/MBEDTLS_KEY_EXCHANGE${1}${2}/g' include/mbedtls/*.h library/*.c programs/*/*.c scripts/data_files/rename-1.3-2.0.txt tests/suites/*.function
```
The ssl-opt.sh test cases using session resumption tend to fail occasionally
on the CI due to a race condition in how ssl_server2 and ssl_client2 handle
the reconnection cycle.
The server does the following in order:
- S1 send application data
- S2 send a close_notify alert
- S3 close the client socket
- S4 wait for a "new connection" (actually a new datagram)
- S5 start a handshake
The client does the following in order:
- C1 wait for and read application data from the server
- C2 send a close_notify alert
- C3 close the server socket
- C4 reset session data and re-open a server socket
- C5 start a handshake
If the client has been able to send the close_notify (C2) and if has been
delivered to the server before if closes the client socket (S3), when the
server reaches S4, the datagram that we start the new connection will be the
ClientHello and everything will be fine.
However if S3 wins the race and happens before the close_notify is delivered,
in S4 the close_notify is what will be seen as the first datagram in a new
connection, and then in S5 this will rightfully be rejected as not being a
valid ClientHello and the server will close the connection (and go wait for
another one). The client will then fail to read from the socket and exit
non-zero and the ssl-opt.sh harness will correctly report this as a failure.
In order to avoid this race condition in test using ssl_client2 and
ssl_server2, this commits introduces a new command-line option
skip_close_notify to ssl_client2 and uses it in all ssl-opt.sh tests that use
session resumption with DTLS and ssl_server2.
This works because ssl_server2 knows how many messages it expects in each
direction and in what order, and closes the connection after that rather than
relying on close_notify (which is also why there was a race in the first
place).
Tests that use another server (in practice there are two of them, using
OpenSSL as a server) wouldn't work with skip_close_notify, as the server won't
close the connection until the client sends a close_notify, but for the same
reason they don't need it (there is no race between receiving close_notify and
closing as the former is the cause of the later).
An alternative approach would be to make ssl_server2 keep the connection open
until it receives a close_notify. Unfortunately it creates problems for tests
where we simulate a lossy network, as the close_notify could be lost (and the
client can't retransmit it). We could modify udp_proxy with an option to never
drop alert messages, but when TLS 1.3 comes that would no longer work as the
type of messages will be encrypted.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
As the SSL programs, like ssl_client2 and ssl_server2, are dependent on
SSL and therefore about to be removed, the only consumer of query_config
is the query_compile_time_config test. As such, it makes sense to move
query_config to be next to what uses it.
