Driver developer's guide: introduction on how to write a driver.
Driver integration guide: how to build Mbed TLS with drivers.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Working draft of the PSA cryptography unified interface specification.
Eventually this document will be under Arm PSA architecture ownership,
but for the time being this draft is maintained in Mbed TLS.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The condition is a complex and repeated a few times. There were already some
inconsistencies in the repetitions as some of them forgot about DES.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The ssl_tranform structure lacks some members accessed by this function when
CBC is not enabled.
This was found by test-ref-configs.pl and all.sh
test_when_no_ciphersuites_have_mac, so no need to add a new test.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Address remaining PR comments for #2118
- Add ChangeLog.d/x509write_csr_heap_alloc.txt.
- Fix parameter alignment per Gille's recommendation.
- Update comments to more explicitly describe the manipulation of buf.
- Replace use of `MBEDTLS_MPI_MAX_SIZE` as `sig` buffer size for
call to `x509write_csr_der_internal()` with more intuitive
`MBEDTLS_PK_SIGNATURE_MAX_SIZE`.
- Update `mbedtls_x509write_csr_der()` to return
`MBEDTLS_ERR_X509_ALLOC_FAILED` on mbedtls_calloc error.
Signed-off-by: Simon Leet <simon.leet@microsoft.com>
Using a stack-buffer with a size > 2K could easily produce a stack
overflow for an embedded device which has a limited stack size.
This commit dynamically allocates the large CSR buffer.
This commit avoids using a temporary buffer for storing the OIDs.
A single buffer is used:
a) OIDs are written backwards starting with the end of the buffer;
b) OIDs are memmove'd to the beginning of the buffer;
c) signature over this OIDs is computed and written backwards from the
end of the buffer;
d) the two memory regions are compacted.
Signed-off-by: Doru Gucea <doru-cristian.gucea@nxp.com>
* development: (22 commits)
Only pass -Wformat-signedness to versions of GCC that support it.
Documentation improvements
Remove redundant assignment
Add comments explaining include paths
Library files aren't supposed to be executable
CMake: Include the library directory for the sake of 3rdparty
Factor common library properties
Fix erroneous skip of test cases for disabled ciphersuites
Include common.h instead of config.h in library source files
Include the library directory for the sake of 3rdparty
Fix copypasta in test case descriptions
Remove metadata tests for features that are not implemented
Fix dependency in PSA test cases
Fix dependency in AES GCM test case
Document the fields of TestCasesOutcomes
Check test case coverage
New script for test outcome analysis
check_test_cases: move some functions into the logical class
check_test_cases: move "walk" functions into a class
check_test_cases: parametrize iteration functions by the action
...
Started as copies of the AES block, then:
- for ARIA, just s/AES/ARIA/
- for Camellia, just s/AES/Camellia/
- for 3DES, s/AES/3DES/ then s/3DES_128_CBC/DES_EDE3_CBC/ then manually
subtract 8 to all plaintext lengths that were > 8. This accounts for the
fact that the block size of DES is 8 not 16.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
All started from a copy of the SHA256 block and modified as follows:
- for MD5, just s/SHA256/MD5/
- for SHA384, adapt the dependency line then s/SHA256/SHA384
- for SHA1, s/SHA256/SHA1/ then manually adapt the plaintext length for the
cases with "!trunc, B-1" and "!trunc, B", as the MAC length (20) is not a
multiple of the block size (16) for this hash
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
- plaintext length = 0 or 1
- plaintext length + MAC length = -1 or 0 mod block_size
(using the minimum plaintext length that works)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Compared to the previous approach of having the bad padding provided as input
to the testing function, this allows to test more kinds of incorrect data,
with less test cases in the .data file and more important no manually-generated
non-trivial data in the test case parameters, making it much easier to
complete the testing matrix.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
They did not match their description, probably due to a botched manual
endianness conversion where the nibbles also got swapped.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Changed PSA core (and PKWrite) from reaching into MPI to using the proper
ecp function to fetch a private key.
Added changelog.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Follow the PSA Crypto specification which was updated between 1.0 beta3
and 1.0.0.
Add corresponding test cases.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
mbedtls_ecp_write_key is a mirror function to mbedtls_ecp_read_key, which
writes a private key back into a byte buffer in the correct format.
This is a helpful convenience function, since the byte order is defined
differently between Montgomery and Weierstrass curves. Since this difference
is accounted for in mbedtls_ecp_read_key, it made sense to add
mbedtls_ecp_write_key for the purpose of abstracting this away such that
psa_export_key doesn't need to take byte order into account.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Rename PSA_DH_GROUP_xxx to PSA_DH_FAMILY_xxx, also rename
PSA_KEY_TYPE_GET_GROUP to PSA_KEY_TYPE_DH_GET_FAMILY and rename
psa_dh_group_t to psa_dh_family_t. Old defines are provided in
include/crypto_compat.h for backward compatibility.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Rename PSA_ECC_CURVE_xxx to PSA_ECC_FAMILY_xxx, also rename
PSA_KEY_TYPE_GET_CURVE to PSA_KEY_TYPE_ECC_GET_FAMILY and rename
psa_ecc_curve_t to psa_ecc_family_t. Old defines are provided in
include/crypto_compat.h for backward compatibility.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
"Include the library directory for the sake of 3rdparty" did the job
for Make and Visual Studio. This commit does the job for CMake.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
All libraries (should) rely on the same directory structure. Instead of
repeating the same clauses 6 times (3 libraries times 2 build modes), set
the include paths, compile definitions and install instructions with a
single piece of code.
Include the 3rdparty directory for all libraries, not just crypto. It's
currently only needed for crypto, but that's just happenstance.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
* development: (46 commits)
Update ChangeLog header.
Bump version to Mbed TLS 2.23.0
Assemble changelog
cmake: Add comment about mbedtls_test target
programs: psa: Link against mbedcrypto not mbedtls
Use mbedtls_test_unhexify in programs
Rework mbedtls_test_unhexify()
tests: Get rid of mbedtls_test_unhexify() in unit test code
tests: ccm: Prepare to char* to data_t* type change
tests: aes.ofb: Prepare to char* to data_t* type change
tests: nist_kw: Prepare to char* to data_t* type change
tests: chacha20: Prepare to char* to data_t* type change
tests: hkdf: Prepare to char* to data_t* type change
tests: aria: Prepare to char* to data_t* type change
programs: Link to tests common code
build: Add top-level mbedtls_test target
programs: cmake: Use list of executables
programs: cmake: Fix relative path warnings
programs: ssl: cmake: Add missing executables
programs: ssl: cmake: Reorder declaration of executables
...
Test cases that force a specific ciphersuites are only executed if
this ciphersuite is enabled. But there are test cases (for RC4) whose
goal is to check that the ciphersuite is not used. These test cases
must run even if (or only if) the ciphersuite is disable, so add an
exception for these test cases.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In library source files, include "common.h", which takes care of
including "mbedtls/config.h" (or the alternative MBEDTLS_CONFIG_FILE)
and other things that are used throughout the library.
FROM=$'#if !defined(MBEDTLS_CONFIG_FILE)\n#include "mbedtls/config.h"\n#else\n#include MBEDTLS_CONFIG_FILE\n#endif' perl -i -0777 -pe 's~\Q$ENV{FROM}~#include "common.h"~' library/*.c 3rdparty/*/library/*.c scripts/data_files/error.fmt scripts/data_files/version_features.fmt
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When compiling library files under `3rdparty/`, the directory containing
the `.c` file that is being compiled is not the current directory, so
headers from the `library/` directory are not found. Fix this by
adding `.` to the include path.
This was not detected until now because as of this commit, no 3rdparty
source file requires a header under `library/`.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Executed "./scripts/bump_version.sh --version 2.23.0 --so-crypto 5"
A symbol has been removed from the mbedcrypto library since the last
release:
mbedtls_ecc_group_to_psa ( enum mbedtls_ecp_group_id grpid,
size_t* bits )
This is an ABI break and we need to increase the SO version.
Signed-off-by: Janos Follath <janos.follath@arm.com>
