`aesni.h` is an internal header and is moved accordingly.
Also removes some references to internal headers in scripts with
only public headers.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Simple find and replace using `#include (<|")mbedtls/(.*)_internal.h(>|")`
and `#include $1$2_internal.h$3`.
Also re-generated visualc files by running
`scripts/generate_visualc_files.pl`.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Make sure line number reported is correct for the overly long line, and
change the message to be more readable.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
As I descovered, a changelog entry with a line length greater than 80
characters would still pass CI. This is a quick change to the script to
make it detect these descrepancies and fail.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
There are type annotations that indirectly depend on the
typing_extensions module (on Python 3.5-3.7: Protocol was added to the
core typing module in 3.8). The typing_extensions module is not
installed by default, so the code didn't run on a pristine Python
installation.
To avoid depending on a non-default module, make the dependency on
typing_extensions optional. (It's still required to run mypy, but
installing mypy takes care of providing typing_extensions.) If it
isn't available, provide a substitute definition that's just good
enough to get the scripts to run.
Move this ugly code to its own module to avoid the temptation of
spreading such ugliness all over the place. It's likely to be used in
other modules anyway.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Otherwise the generation is sensitive to trivial differences such as
running `tests/scripts/generate_psa_tests.py` vs
`./tests/scripts/generate_psa_tests.py` vs an absolute path.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
SECP192R1 is declared in the PSA API specification, but it's an old
one that Mbed TLS doesn't support and even OpenSSL doesn't support.
We don't have test vectors for it. Just skip it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Asymmetric keys can't just be arbitrary byte strings: the public key
has to match the private key and the private key usually has
nontrivial constraints.
In order to have deterministic test data and not to rely on
cryptographic dependencies in the Python script, hard-code some test
keys.
In this commit, copy some test keys from test_suite_psa_crypto.data.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
New Python module intended to gather knowledge about key types and
cryptographic mechanisms, such as the ability to create test data for
a given key type and the determination of whether an algorithm is
compatible with a key type.
This commit just creates a class for knowledge about key types.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
At the moment it makes no difference, but it could if e.g. a new
algorithm was called 'foomask'.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
By default, exclude macros whose numerical value is not a valid member
of the semantic type (e.g. PSA_ALG_xxx_BASE is not itself an
algorithm, only an intermediate value used to construct others). But
do include them with include_intermediate=True, which
generate_psa_constants.py does.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This brings them in line with PSA Crypto API 1.0.0
PSA_ALG_AEAD_WITH_DEFAULT_TAG_LENGTH -> PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG
PSA_ALG_AEAD_WITH_TAG_LENGTH -> PSA_ALG_AEAD_WITH_SHORTENED_TAG
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
Declaring query_config() belongs with the query_config program, not in
ssl_test_lib.h, so move the declaration to a new header file
query_config.h.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Create a new source file for code that is shared between ssl_client2.c
and ssl_server2.c. This commit only creates the file; subsequent
commits will populate it.
Add it to the official build systems (make, cmake, VS).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Create a directory mbedtls_dev intended to contain various Python
module for use by Python scripts located anywhere in the Mbed TLS
source tree.
Move get_c_expression_values and its auxiliary functions into a new
Python module mbedtls_dev.c_build_helper.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Create a configuration option for autonomous random drivers, i.e. PSA
crypto drivers that provide a random generator, that have their own
entropy source and do not support injecting entropy from another
source.
This commit only creates the configuration option. Subsequent commits
will add the implementation and tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Simplify the guards on MBEDTLS_ERROR_C and MBEDTLS_ERROR_STRERROR_DUMMY.
No longer include superfluous headers and definition: platform.h is
only needed for MBEDTLS_ERROR_C; time_t is not needed at all.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Code under MBEDTLS_USE_PSA_CRYPTO define is PSA client
code intended to use key identifiers of type psa_key_id_t.
Thus the MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
configuration option is incompatible with
MBEDTLS_USE_PSA_CRYPTO.
State this in config.h and check_config.h.
As a consequence:
. remove MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER from
the full configuration, as MBEDTLS_USE_PSA_CRYPTO is
part of it.
. add a new component in all.sh to keep testing the
library when MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
is set.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
<string.h> is actually needed when MBEDTLS_ERROR_C is enabled and not
when only MBEDTLS_ERROR_STRERROR_DUMMY is enabled.
Fix#3866.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Provided a clearer comment for the description for ignoring
MBEDTLS_PSA_CRYPTO_CONFIG for full build setting.
Updated message output for test_psa_crypto_config_basic and
test_psa_want_ecdsa_disabled_software so it is more clear and
concise in what the test is doing. Removed inclusion of the
MBEDTLS_PSA_ACCEL_ALG_ECDSA since it should not have been used
for that particular tests.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
With the new feature MBEDTLS_PSA_CRYPTO_CONFIG, needed to
add support that when the feature is disabled, if there
are defines like MBEDTLS_ECDSA_C defined, then the PSA_WANT_
equivalent define is also enabled. This ensures the guards in
the library psa_crypto will work properly.
Also fixed an error return code in the driver wrapper for cipher
encrypt setup so it will properly pass unit tests.
Ensured config.py full works properly with the new
MBEDTLS_PSA_CRYPTO_CONFIG, it should not be set when the full
option is used.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Python should not be required for the build when the no_test target is
used. This commit adds the generated file to the source tree and the
check-generated-files script, and removes the generation from (c)make.
Fixes#3524
Signed-off-by: Cameron Nemo <cnemo@tutanota.com>
No obvious reason to not enable owner identifier encoding
in baremetal as multi-client support is expected to be needed
for some embedded platforms. Thus enable it.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Also adjusted the different makefiles accordingly.
Note: driver lifetime is currently statically defined in the header, but
this will be replaced in the future based on autogeneration of lifetime
values by a script (TBD)
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Enable key identifiers encoding owner identifier in
the full configuration.
With this change the unit tests on the full
configuration are failing. The following commit do
the necessary changes to the PSA code and test code
for the tests to pass with this configuration
option enabled.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
With PSA crypto v1.0.0, a volatile key identifier may
contain a owner identifier but no file is associated
to it. Thus rename the type psa_key_file_id_t to
mbedtls_svc_key_id_t to avoid a direct link with a
file when a key identifier involves an owner
identifier.
The new type name is prefixed by mbedtls to highlight
that the type is specific to Mbed TLS implementation
and not defined in the PSA Cryptography API
specification.
The svc in the type name stands for service as this
is the key identifier type from the point of view of
the service providing the Cryptography services.
The service can be completely provided by the present
library or partially in case of a multi-client service.
As a consequence rename as well:
. MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER to
MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
. PSA_KEY_ID_INIT to MBEDTLS_SVC_KEY_ID_INIT
. PSA_KEY_FILE_GET_KEY_ID to MBEDTLS_SVC_KEY_ID_GET_KEY_ID
. psa_key_file_id_make to mbedtls_svc_key_id_make
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
* development:
Update copyright notices to use Linux Foundation guidance
Undef ASSERT before defining it to ensure that no previous definition has sneaked in through included files.
Add ChangeLog entry for X.509 CN-type vulnerability
Improve documentation of cn in x509_crt_verify()
Fix comparison between different name types
Add test: DNS names should not match IP addresses
Remove obsolete buildbot reference in compat.sh
Fix misuse of printf in shell script
Fix added proxy command when IPv6 is used
Simplify test syntax
Fix logic error in setting client port
ssl-opt.sh: include test name in log files
ssl-opt.sh: remove old buildbot-specific condition
ssl-opt.sh: add proxy to all DTLS tests
Signed-off-by: Dan Handley <dan.handley@arm.com>
Currently the new component in all.sh fails because
mbedtls_ssl_cf_memcpy_offset() is not actually constant flow - this is on
purpose to be able to verify that the new test works.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
As a result, the copyright of contributors other than Arm is now
acknowledged, and the years of publishing are no longer tracked in the
source files.
Also remove the now-redundant lines declaring that the files are part of
MbedTLS.
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find files
find '(' -path './.git' -o -path './3rdparty' ')' -prune -o -type f -print | xargs sed -bi '
# Replace copyright attribution line
s/Copyright.*Arm.*/Copyright The Mbed TLS Contributors/I
# Remove redundant declaration and the preceding line
$!N
/This file is part of Mbed TLS/Id
P
D
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
This option allows to test the constant-flow nature of selected code, using
MemSan and the fundamental observation behind ctgrind that the set of
operations allowed on undefined memory by dynamic analysers is the same as the
set of operations allowed on secret data to avoid leaking it to a local
attacker via side channels, namely, any operation except branching and
dereferencing.
(This isn't the full story, as on some CPUs some instructions have variable
execution depending on the inputs, most notably division and on some cores
multiplication. However, testing that no branch or memory access depends on
secret data is already a good start.)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Rename PSA_DH_GROUP_xxx to PSA_DH_FAMILY_xxx, also rename
PSA_KEY_TYPE_GET_GROUP to PSA_KEY_TYPE_DH_GET_FAMILY and rename
psa_dh_group_t to psa_dh_family_t. Old defines are provided in
include/crypto_compat.h for backward compatibility.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Rename PSA_ECC_CURVE_xxx to PSA_ECC_FAMILY_xxx, also rename
PSA_KEY_TYPE_GET_CURVE to PSA_KEY_TYPE_ECC_GET_FAMILY and rename
psa_ecc_curve_t to psa_ecc_family_t. Old defines are provided in
include/crypto_compat.h for backward compatibility.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
In library source files, include "common.h", which takes care of
including "mbedtls/config.h" (or the alternative MBEDTLS_CONFIG_FILE)
and other things that are used throughout the library.
FROM=$'#if !defined(MBEDTLS_CONFIG_FILE)\n#include "mbedtls/config.h"\n#else\n#include MBEDTLS_CONFIG_FILE\n#endif' perl -i -0777 -pe 's~\Q$ENV{FROM}~#include "common.h"~' library/*.c 3rdparty/*/library/*.c scripts/data_files/error.fmt scripts/data_files/version_features.fmt
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When compiling library files under `3rdparty/`, the directory containing
the `.c` file that is being compiled is not the current directory, so
headers from the `library/` directory are not found. Fix this by
adding `.` to the include path.
This was not detected until now because as of this commit, no 3rdparty
source file requires a header under `library/`.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find scripts
find -path './.git' -prune -o '(' -name '*.gdb' -o -name '*.pl' -o -name '*.py' -o -name '*.sh' ')' -print | xargs sed -i '
# Remove Mbed TLS declaration if it occurs before the copyright line
1,/Copyright.*Arm/I {
/This file is part of/,$ {
/Copyright.*Arm/I! d
}
}
# Convert non-standard header in scripts/abi_check.py to the format used in the other scripts
/"""/,/"""/ {
# Cut copyright declaration
/Copyright.*Arm/I {
h
N
d
}
# Paste copyright declaration
/"""/ {
x
/./ {
s/^/# / # Add #
x # Replace orignal buffer with Copyright declaration
p # Print original buffer, insert newline
i\
s/.*// # Clear original buffer
}
x
}
}
/Copyright.*Arm/I {
# Print copyright declaration
p
# Read the two lines immediately following the copyright declaration
N
N
# Insert Apache header if it is missing
/SPDX/! {
i\
# SPDX-License-Identifier: Apache-2.0\
#\
# Licensed under the Apache License, Version 2.0 (the "License"); you may\
# not use this file except in compliance with the License.\
# You may obtain a copy of the License at\
#\
# http://www.apache.org/licenses/LICENSE-2.0\
#\
# Unless required by applicable law or agreed to in writing, software\
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT\
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\
# See the License for the specific language governing permissions and\
# limitations under the License.
# Insert Mbed TLS declaration if it is missing
/This file is part of/! i\
#\
# This file is part of Mbed TLS (https://tls.mbed.org)
}
# Clear copyright declaration from buffer
D
}
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
No effect so far, except on dependency checking, as the feature it's meant to
disable isn't implemented yet (so the descriptions in config.h and the
ChangeLog entry are anticipation for now).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This commit modifies the generate_psa_constants.py script to take as
input argument the location of where to write the
psa_constant_names_generated.c file.
For make-based build system, this commit does not change anything.
For CMake build system, this commit modifies the generation location of
that file to be inside the build directory and include it from there in
psa_constant_names.c
Fix#3365
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>
Add output of python3 version to output_env.sh.
Added in addition to the version of `python` as some
project's scripts try both executable names.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When generate_errors.pl was first written, there was no asn1.h. But
now there is one and it does not need any special treatment.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Keep it simple and mostly non-parametrizable for now.
A path to Visual Studio 2017 is hard-coded.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
1. The functions mbedtls_high_level_strerr and mbedtls_low_level_strerr
accept any error code and extract the high-level and low-level parts
respectively.
2. Documentation updates.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
Use "no_deprecated" both in the name of the configuration and in the
name of all.sh components, rather than a mixture of "no_deprecated"
and "non_deprecated".
Make all.sh component names more consistent.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Every boolean (defined/undefined) symbol is a "variant toggle" in some
sense, even enabling a module with MBEDTLS_xxx_C. What matters is
whether the symbol influences some other part of the system in such a
way that we need to run tests separately with and without it being
defined.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It's deprecated, but not otherwise counter-indicated for the full
config: it doesn't conflict with anything and enabling it doesn't make
testing harder (especially since it defaults off in compat.sh).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
MBEDTLS_DEPRECATED_REMOVED is turned off in full since we don't want
to turn off deprecated features. Also turn off
MBEDTLS_DEPRECATED_WARNING since we wouldn't want expected warnings:
we're aware that we're enabling deprecated modules.
Since MBEDTLS_DEPRECATED_WARNING is excluded from full, it doesn't
need to be excluded from baremetal explicitly.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It started out as be experimental, but it is now robust enough not to
break the rest, so there's no reason to leave it out.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Enable MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 in the full config. There's
no reason to keep it out. We weren't testing it at all on the CI.
Add a missing dependency on !MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 to
some test cases that either were testing that v3 extensions are only
accepted in v3 certificates, or where parsing returns a different
error when MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 is enabled.
Add a few positive and negative test cases with
MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 enabled.
Fix one test case with MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 where the
intended output of mbedtls_x509_crt_info had changed in
890819a597 but the test case was missed
because it was never executed.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The intended logic around MBEDTLS_xxx_ALT is to exclude them from full
because they require the alternative implementation of one or more
library functions, except that MBEDTLS_PLATFORM_xxx_ALT are different:
they're alternative implementations of a platform function and they
have a built-in default, so they should be included in full. Document
this.
Fix a bug whereby MBEDTLS_PLATFORM_xxx_ALT didn't catch symbols where
xxx contains an underscore. As a consequence,
MBEDTLS_PLATFORM_GMTIME_R_ALT and MBEDTLS_PLATFORM_NV_SEED_ALT are now
enabled in the full config. Explicitly exclude
MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT because it behaves like the
non-platform ones, requiring an extra build-time dependency.
Explicitly exclude MBEDTLS_PLATFORM_NV_SEED_ALT from baremetal
because it requires MBEDTLS_ENTROPY_NV_SEED, and likewise explicitly
unset it from builds that unset MBEDTLS_ENTROPY_NV_SEED.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The presence of these markers in the original code was helpful to me in
figuring out that this portion of the code is auto-generated.
Therefore, I think those are useful and should be present.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
- Use switch case instead of loop to generate faster code
- Add #if defined to address compiler error
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
Problem
-------
mbedtls_strerror is a utility function which converts an mbedTLS error code
into a human readable string. It requires the caller to allocate a buffer every
time an error code needs to be converted to a string. It is an overkill and a
waste of RAM for resource constrained microcontrollers - where the most common
use case is to use these strings for logging.
Solution
--------
The proposed commit adds two functions:
* const char * mbedtls_high_level_strerr( int error_code );
* const char * mbedtls_low_level_strerr( int error_code );
The above two functions convert the high level and low level parts of an mbedTLS
error code to human readable strings. They return a const pointer to an
unmodifiable string which is not supposed to be modified by the caller and only
to be used for logging purposes. The caller no longer needs to allocate a
buffer.
Backward Compatibility
----------------------
The proposed change is completely backward compatible as it does not change
the existing mbedtls_strerror function and ensures that it continues to behave
the same way.
Signed-off-by: Gaurav Aggarwal <aggarg@amazon.com>
Don't mix Windows and Unix line endings, it's the worst of both worlds.
Update the Visual Studio templates and regenerate the generated files.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Use CRLF consistently instead of cobbling a \r here and a \n there.
The generated files don't change.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Instead of working with Markdown format, keep the classic Mbed TLS
ChangeLog format, with the classic category names. Keep the classic
file name as well. This way there's no risk of breaking third-party
scripts that may copy or even parse the changelog file.
Accordingly, expect ChangeLog/*.txt files instead of ChangeLog/*.md.
This commit completely rewrites the parsing and output code.
This commit systematically appends to the existing top version. A
subsequent commit will restore the capability of creating a new
version.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Document that git is needed.
Be clearer about the entry sort key being an entry sort key, not just
a merge order. Be clearer about what "merge order" means.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Changelog entry files were listed in reverse alphabetical order of the
file name, by happenstance. Now, changelog entry files are listed in
the order in which the changes were merged. More precisely: look for
the git commit where the entry file was created, and look where this
commit was merged into the current branch. List older merges first.
List never-merged commits in date order after all the merged ones.
List never-committed files in file timestamp order after all the
committed ones.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Conflicts:
* .github/issue_template.md, .github/pull_request_template.md:
The changes in Mbed Crypto are not relevant to Mbed TLS. Keep the
mbedtls versions.
Rather than sometimes returning an integer, sometimes a boolean and
sometimes implicitly returning None, always return 0 for success and 1
for failure.
No behavior change for the program as a whole, since the None/True/False
values were implicitly converted to the desired numerical value.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't use a function argument as a for loop variable. It worked (mostly) but
Pylint frowns on it (redefined-argument-from-local) and I think Pylint has a
point.
If the configuration file is not found, raise an exception mentioning the
search path rather than just its last element.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Merge the latest state of the target branch (mbedtls/development) into the
pull request to merge mbed-crypto into mbedtls.
Conflicts:
* ChangeLog: add/add conflict. Resolve by using the usual section order.
Rename identifiers containing double-underscore (`__`) to avoid `__`.
The reason to avoid double-underscore is that all identifiers
containing double-underscore are reserved in C++. Rename all such
identifiers that appear in any public header, including ssl_internal.h
which is in principle private but in practice is installed with the
public headers.
This commit makes check-names.sh pass.
```
perl -i -pe 's/\bMBEDTLS_SSL__ECP_RESTARTABLE\b/MBEDTLS_SSL_ECP_RESTARTABLE_ENABLED/g; s/\bMBEDTLS_KEY_EXCHANGE_(_\w+)_(_\w+)\b/MBEDTLS_KEY_EXCHANGE${1}${2}/g' include/mbedtls/*.h library/*.c programs/*/*.c scripts/data_files/rename-1.3-2.0.txt tests/suites/*.function
```
Merge `unremove-non-crypto` into `mbedtls/development`. The branch
`unremove-non-crypto` was obtained by starting from `mbed-crypto/development`,
then reverting many commits that removed X.509 and TLS functionality when Mbed
Crypto forked from Mbed TLS (the “unremoval”), then make a few tweaks to
facilitate the merge.
The unremoval step restored old versions of some tls files. If a file doesn't
exist in mbed-crypto, check out the mbedtls version, regardless of what
happened during the unremoval of tls files in the crypto tree. Also
unconditionally take the mbedtls version of a few files where the
modifications are completely project-specific and are not relevant in
mbed-crypto:
* `.github/issue_template.md`: completely different. We may want to reconcile
them independently as a follow-up.
* `.travis.yml`: would only be reverted to an earlier tls version.
* `README.md`: completely different. We may want to reconcile them
independently as a follow-up.
* `doxygen/input/doc_mainpage.h`: the changes in crypto were minimal and not
relevant except as a stopgap as mbed-crypto did not have its own product
versioning in the Doxygen documentation.
* `tests/.jenkins/Jenkinsfile`: completely different.
* `tests/data_files/Makefile`: there were no changes in mbed-crypto,
but the unremoval step restored an old version.
Shell script for everything to do after the merge apart from the conflict
resolution:
```
tls_files=($(comm -23 <(git ls-tree -r --name-only HEAD) <(git ls-tree -r --name-only $(git merge-base upstream-crypto/development MERGE_HEAD))))
tls_files+=($tls_files .github/issue_template.md .travis.yml README.md doxygen/input/doc_mainpage.h tests/.jenkins/Jenkinsfile tests/data_files/Makefile)
git checkout --theirs HEAD -- $tls_files
git add -- $tls_files
```
Resolve the remaining conflicts:
* `library/CMakeLists.txt`:
* Keep the TLS definition of `src_crypto`
* `USE_SHARED_MBEDTLS_LIBRARY`: keep all three libraries, with both
`include` and `crypto/include` in `target_include_directories`, all with
version `2.21.0`.
* `programs/Makefile`:
* Reconcile the APPS lists (add/add from a differently-formatted common
ancestor): insert the `psa/*` from crypto into the tls list.
* Keep the `fuzz` target defined only in tls version.
* Keep the recipe (only in tls version) cleaning `ssl_pthread_server`
stuff for the `clean` target.
* `scripts/config.py`:
* `include_in_full`: add/add conflict. Keep both.
* `tests/scripts/all.sh`:
* `component_test_no_use_psa_crypto_full_cmake_asan`: partially old
version in crypto. Take the tls version.
* `component_test_malloc_0_null` and more: take
`component_test_malloc_0_null` from crypto (with `config.py` rather than
`config.pl`, and with `$ASAN_FLAGS` rather than an explicit list), but
add the call to `ssl-opt.sh` from tls. Take the other components from
crypto.
With this commit, building and running the unit tests with both `make ` and
`cmake` work in the default configuration on Linux. Other platforms, build
systems and configurations are likely not to work, and there is some
regression in test coverage.
There is some loss of functionality because the unremoval step restored older
versions of tls content. This commit contains the latest tls version of
tls-only files, but some changes from the tls side in files that existed on
both sides have regressed. Most problematic changes are hunks that remove some
tls-specific feature and contain either a C preprocessor symbol identifying a
tls-specific module or option, or the name of a tls-specific file. Hunks
that remove a tls-specific preprocessor symbol can be identified with the
regular expression `^-.*MBEDTLS_(ERR_)?(PKCS11|X509|NET|SSL)_`.
Subsequent commits will revert a few parts of the patch from this merge commit
in order to restore the tls functionality that it removes, ensure that the
test coverage includes what was covered in either branch, and fix test
failures.
This reverts commit 9afb2e9921.
Conflicts:
* include/CMakeLists.txt
* "Make config.h available" comment: there has been a change
adjacent to where it was removed. Just re-add what was removed.
* tests/CMakeLists.txt:
* compat.sh: there has been a change immediately before where it was
removed. Just re-add what was removed.
This reverts commit 8298d70bee.
Conflicts:
* library/Makefile: removal of SOEXT_X509 and SOEXT_TLS vs change of
value of SOEXT_CRYPTO. Keep all, with the new value of SOEXT_CRYPTO.
This reverts commit 1c66e48670.
Conflicts:
* include/mbedtls/check_config.h:
* MBEDTLS_SSL_PROTO_SSL3: there has been an addition (of
MBEDTLS_SHA512_NO_SHA384) at the place where it was removed. Re-add it
after (alphabetical order).
* MBEDTLS_ENABLE_WEAK_CIPHERSUITES: there has been an addition (of
MBEDTLS_CTR_DRBG_USE_128_BIT_KEY) at the place where it was removed.
Re-add it after (alphabetical order).
* MBEDTLS_SSL_ALL_ALERT_MESSAGES: there has been an addition (of
MBEDTLS_SHA512_SMALLER) at the place where it was removed. Re-add it
after (alphabetical order).
* include/mbedtls/config.h:
* MBEDTLS_ENABLE_WEAK_CIPHERSUITES: there has been an addition (of
MBEDTLS_CTR_DRBG_USE_128_BIT_KEY) at the place where it was removed.
Re-add it after (alphabetical order).
* MBEDTLS_SSL_ALL_ALERT_MESSAGES: there has been an addition (of
MBEDTLS_SHA512_SMALLER) at the place where it was removed. Re-add it
after (alphabetical order).
* library/version_features.c: re-generate by running
scripts/generate_features.pl.
* programs/test/query_config.c: re-generate by running
scripts/generate_query_config.pl.
* scripts/config.pl: this file has been replaced by config.py. Port
the reversed changes to config.py:
* Revert removing three symbols from the list of symbols to
exclude from full.
* Revert removing one symbol (MBEDTLS_NET_C) from the list of symbols
to exclude from baremetal.
* scripts/footprint.sh:
* Re-add the line to unset MBEDTLS_NET_C, but with config.py instead of
config.pl.
* tests/scripts/all.sh:
* component_test_no_platform: re-add the line to unset MBEDTLS_NET_C, but
with config.py instead of config.pl.
* component_build_arm_none_eabi_gcc,
component_build_arm_none_eabi_gcc_no_udbl_division,
component_build_arm_none_eabi_gcc_no_64bit_multiplication,
component_build_armcc: these components now use the baremetal
configuration, so they do not need to turn off MBEDTLS_NET_C explicitly.
This reverts commit bb1f701212.
* include/mbedtls/check_config.h:
* MBEDTLS_X509_RSASSA_PSS_SUPPORT: there has been an addition (of
MBEDTLS_SHA512_NO_SHA384) at the place where it was removed.
Re-add it before MBEDTLS_SHA512_NO_SHA384 to keep it grouped
with MBEDTLS_RSA_C.
Conflicts:
* scripts/config.pl: this file has been replaced by config.py. Port
the reversed changes to config.py:
* Revert removing three symbols from the list of symbols to
exclude from full.
This reverts commit 356acc82ad.
Conflicts:
* scripts/generate_errors.pl: a line adjacent to a changed line has
independently changed in the meantime. Just revert the change done
in the commit that's being reverted.
Pylint when installed as a distro package can be installed as pylint3, whilst as
a PEP egg, it can be installed as pylint.
This commit changes the scripts to first use pylint if installed, and optionally
look for pylint3 if not installed. This is to allow a preference for the PEP
version over the distro version, assuming the PEP one is more likely to be
the correct one.
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
`pylint3 --version` will output to stderr the status of the config file it's
using. This can be "No config file found" or "Using config file" or nothing.
This means the pylint version may or may not be on the first line.
Therefore this commit changes the filters on the pylint3 version output to first
strip out the config line, and then to select only the pylint line.
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
Add the versions of Python, Perl, and Pylint to the version dump provided by
the output_env.sh script.
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
A number of clean-up improvements following review.
* removal of redundant `` quotes
* removal of non-portable echo "\n", in favour of additional echo commands
* change to use of uname to detemine if the platform is Linux or not
* revised formatting of output
* change to dpkg-query from dpkg to find installed libasan variants
Co-Authored-By: Gilles Peskine <gilles.peskine@arm.com>
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
This commit adds additional information to the output_env.sh script of:
* Linux distribution version (if available)
* GDB version (if available)
It also makes some information clearer:
* the type of OpenSSL/GNUTLS version (legacy/default/next)
* and whether certain versions are not installed, or not configured
And it simplifies the error messages for absent tools.
Signed-off-by: Simon Butcher <simon.butcher@arm.com>
generate_visualc_files.pl has a list of directories that it pulls
headers from, so it knows what directories to put on the include path.
Make it inject the include path into the output files, rather than
hard-coding the include paths in template files.
A similar change (but with different code) was made in Mbed TLS in
commit b78cf2b261
"Adjust visual studio file generation to always use the crypto submodule".
No semantic change: this commit does not change the generated files.
There's no need to keep the directory lists separated until the last
minute.
No semantic change. The generated files change slightly because there
was one directory list where slashes were not changed to backslashes
like in the other five. This does not affect their semantics.
Other third-party components can now be added by just adding lines to
the definitions of @thirdparty_header_dirs and
@thirdparty_source_dirs.
No semantic change. The output does not change at all.
As the SSL programs, like ssl_client2 and ssl_server2, are dependent on
SSL and therefore about to be removed, the only consumer of query_config
is the query_compile_time_config test. As such, it makes sense to move
query_config to be next to what uses it.
Files deleted by us: keep them deleted.
```
git rm $(git status -s | sed -n 's/^DU //p')
```
Individual files with conflicts:
* `README.md`: keep the crypto version.
* `doxygen/input/doc_mainpage.h`: keep the crypto version (with an obsolete Mbed Crypto version number).
* `include/mbedtls/error.h`:
* `ERROR`: similar additions made through parallel commits, with only whitespace differences. Align with the tls version.
* `library/CMakeLists.txt`: keep the crypto version.
* `library/Makefile`: keep the crypto version.
* `scripts/generate_errors.pl`: keep the crypto version (the relevant changes were made through parallel commits).
* `tests/scripts/check-test-cases.py`:
* `Results`: keep the crypto version, which has both the new argument to the constructor (added in crypto only) and the class docstring (added through parallel commits).
* `tests/suites/helpers.function`:
* `ARRAY_LENGTH`, `ASSERT_ALLOC`: additions in the same location. Keep both, in indifferent order.
* `tests/suites/target_test.function`:
* `receive_uint32`: keep the crypto version which has an additional bug fix. The tls changes made in tls are irrelevant after this bug fix.
* `visualc/VS2010/mbedTLS.vcxproj`: run `scripts/generate_visualc_files.pl`.
Review of non-conflicting changes:
* `all.sh`: 1 change.
* zlib test components: don't add them.
* `include/CMakeLists.txt`: 1 change.
* `target_include_directories`: doesn't work as is (different target name). Don't take the change.
* All other non-conflicting changes: take them.
All key types now have an encoding on 32 bits where the bottom 16 bits
are zero. Change to using 16 bits only.
Keep 32 bits for key types in storage, but move the significant
half-word from the top to the bottom.
Likewise, change EC curve and DH group families from 32 bits out of
which the top 8 and bottom 16 bits are zero, to 8 bits only.
Reorder psa_core_key_attributes_t to avoid padding.
Check that no line from any of the input files was lost.
This is not perfect for several reasons.
It doesn't check that the content goes to the desired location.
It doesn't check that sections are created as necessary.
It doesn't support whitespace normalization that the parsing code does.
But it's a good start.
Now that the Error module has error codes as well and is processed by
the generate_errors script like any other module, we don't need to
include the header manually.
One of the error codes was already reserved, this commit just makes it
explicit. The other one is a new error code for initializing return
values in the library: `MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED` should
not be returned by the library. If it is returned, then it is surely a
bug in the library or somebody is tampering with the device.
Filter out non-ASCII characters in automatically processed headers.
Do this in a way that minimizes the code change: keep manipulating
strings, but strip off non-ASCII characters when reading lines, which
should only remove characters in comments that we don't parse anyway.
One of the error codes was already reserved, this commit just makes it
explicit. The other one is a new error code for initializing return
values in the library: `MBEDTLS_ERR_ERROR_CORRUPTION_DETECTED` should
not be returned by the library. If it is returned, then it is surely a
bug in the library or somebody is tampering with the device.
This is a variant toggle, not an extra feature, so it should be tested
separately.
We test most of the effect of MBEDTLS_ENTROPY_FORCE_SHA256 (namely,
using SHA-256 in the entropy module) when we test the library with the
SHA512 module disabled (which we do at least via depends-hashes.pl).
This commit removes testing of the MBEDTLS_ENTROPY_FORCE_SHA256 option
itself, which should be added separately.
Enabling MBEDTLS_MEMORY_BUFFER_ALLOC_C module together with
MBEDTLS_PLATFORM_MEMORY causes the library to use its own malloc
replacement. This makes memory management analyzers such as ASan
largely ineffective. We now test MBEDTLS_MEMORY_BUFFER_ALLOC_C
separately. Disable it in the "full" config.
This mirrors a change that was made in Mbed TLS on config.pl and had
not been ported to Mbed Crypto yet.
With this commit, config.py is aligned in Mbed Crypto and Mbed TLS.
Normally a valueless symbol remains valueless and a symbol with a
value keeps having one. But just in case a symbol does get changed
from valueless to having a value, make sure there's a space between
the symbol and the value. And if a symbol gets changed from having a
value to valueless, strip trailing whitespace.
Add corresponding tests.
Also fix the case of a valueless symbol added with the set method,
which would have resulted in attempting to use None as a string. This
only happened with the Python API, not with the command line API.
By default, this script looks for include/mbedtls/config.h relative to
the current directory. This allows running config.py from outside the
build tree.
To support out-of-tree builds where config.h and config.py are in the
source tree and the current directory is in the build tree, also try
DIRECTORY_CONTAINING_SCRIPT/../include/mbedtls/config.h, and the
equivalent with symbolic links traversed.
git grep -Fl /config.pl | xargs sed -i -e 's!/config\.pl!/config.py!g'
Also:
* Change one comment in include/mbedtls/check_config.h.
* Change PERL to PYTHON in CMakeLists.txt.
They're easier to maintain that way. The old lists were partly
alphabetized, partly based on config.h order, and partly in the order
in which symbols had been added to config.pl.
Also fix 'realfull' to only affect the appropriate sections.
Tested to produce the same results as config.pl on the default
configuration. This commit deliberately contains a direct copy the
lists of symbol names from config.pl.
This is meant to be a drop-in replacement for config.pl which can
additionally be used as a library in a Python script.
So far this script supports the commands 'get', 'set' and 'realfull'
but not the other built-in configurations.
assemble_changelog.py reads changelog entries from ChangeLog.d/*.md
and merges them into ChangeLog.md.
The changelog entries are merged into the first version in
ChangeLog.md. The script does not yet support creating a new version
in ChangeLog.md.
The changelog entries are merged in alphabetical order of the file
names. Future versions of this script are likely to adopt a different
order that reflects the git history of the entries.
Normally a valueless symbol remains valueless and a symbol with a
value keeps having one. But just in case a symbol does get changed
from valueless to having a value, make sure there's a space between
the symbol and the value. And if a symbol gets changed from having a
value to valueless, strip trailing whitespace.
Add corresponding tests.
Also fix the case of a valueless symbol added with the set method,
which would have resulted in attempting to use None as a string. This
only happened with the Python API, not with the command line API.
By default, this script looks for include/mbedtls/config.h relative to
the current directory. This allows running config.py from outside the
build tree.
To support out-of-tree builds where config.h and config.py are in the
source tree and the current directory is in the build tree, also try
DIRECTORY_CONTAINING_SCRIPT/../include/mbedtls/config.h, and the
equivalent with symbolic links traversed.
git grep -Fl /config.pl | xargs sed -i -e 's!/config\.pl!/config.py!g'
Also:
* Change one comment in include/mbedtls/check_config.h.
* Change PERL to PYTHON in CMakeLists.txt.
They're easier to maintain that way. The old lists were partly
alphabetized, partly based on config.h order, and partly in the order
in which symbols had been added to config.pl.
Also fix 'realfull' to only affect the appropriate sections.
Tested to produce the same results as config.pl on the default
configuration. This commit deliberately contains a direct copy the
lists of symbol names from config.pl.
This is meant to be a drop-in replacement for config.pl which can
additionally be used as a library in a Python script.
So far this script supports the commands 'get', 'set' and 'realfull'
but not the other built-in configurations.
This being the first 3rdparty-contribution, we may want to consider the
structure of the project file generation scripts. Perhaps add small,
constribution-specific scripts to each directory in 3rdparty instead of adding
all constraints to generate_visualc_files.pl?
This being the first 3rdparty-contribution, we may want to consider the
structure of the project file generation scripts. Perhaps add small,
constribution-specific scripts to each directory in 3rdparty instead of adding
all constraints to generate_visualc_files.pl?
Conflicts and changes:
* Files that do not exist in Mbed Crypto and have changed in Mbed TLS:
These files should not exist in Mbed Crypto. Keep them deleted.
* tests/data_files/test-ca.server1.db: new file in Mbed TLS, don't create
it in Mbed Crypto.
* tests/data_files/rsa_pkcs1_1024_clear.pem: do create this file in
Mbed Crypto. I don't see why it would be kept out.
* tests/data_files/Makefile: don't take any of the changes in sections
that have been removed in Crypto. Do take in the certificate
expiration date updates and the extra .crt.der rules (even if Crypto
doesn't actually use those certificates: removing them would be out
of scope of the present merge).
* tests/suites/helpers.function: consecutive additions, take
both (order indifferent).
Conflict resolution:
* `scripts/config.pl`:
Take the exclusion of `MBEDTLS_PSA_CRYPTO_SE_C` from the API branch.
Take the removal of `MBEDTLS_PSA_CRYPTO_STORAGE_ITS_C` (obsolete) from
the development branch.
* `tests/scripts/all.sh`:
Multiple instances of factoring a sequence of `config.pl` calls into
a mere `config.pl baremetal` in the development branch, and a change in
the composition of `baremetal` in the API branch. In each case, take the
version from development.
* `tests/suites/test_suite_psa_crypto_slot_management.function`:
A function became non-static in development and disappeared in the API
branch. Keep the version from the API branch. Functions need to be
non-static if they're defined but unused in some configurations,
which is not the case for any function in this file at the moment.
* `tests/suites/test_suite_psa_crypto.function`:
Consecutive changes in the two branches, reconciled.
Resolve conflicts by performing the following operations:
- Reject changes related to building a crypto submodule, since Mbed
Crypto is the crypto submodule.
- Reject X.509, NET, and SSL changes.
- Reject changes to README, as Mbed Crypto is a different project from
Mbed TLS, with a different README.
- Avoid adding mention of ssl-opt.sh in a comment near some modified
code in include/CMakeLists.txt (around where ENABLE_TESTING as added).
- Align config.pl in Mbed TLS with config.pl in Mbed Crypto where PSA
options are concerned, to make future merging easier. There is no
reason for the two to be different in this regard, now that Mbed TLS
always depends on Mbed Crypto. Remaining differences are only the
PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER option and the absence of X.509,
NET, and SSL related options in Mbed Crypto's config.pl.
- Align config.h in Mbed Crypto with Mbed TLS's copy, with a few notable
exceptions:
- Leave CMAC on by default.
- Leave storage on by default (including ITS emulation).
- Avoid documenting the PSA Crypto API as is in beta stage in
documentation for MBEDTLS_PSA_CRYPTO_C.
The only remaining differences are a lack of X.509, NET, and SSL
options in Mbed Crypto's config.h, as well as an additional
Mbed-Crypto-specific PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER option.
Documentation for the check params feature and related macros is also
updated to match Mbed TLS's description.
- Reject tests/data_files/Makefile changes to generate DER versions of
CRTs and keys, as none of those are used by Mbed Crypto tests.
- Add the "no PEM and no filesystem" test to all.sh, without ssl-opt.sh
run, as Mbed Crypto doesn't have ssl-opt.sh. Also remove use of PSA
Crypto storage and ITS emulation, since those depend on filesystem
support.
- Reject addition of test when no ciphersuites have MAC to all.sh, as
the option being tested, MBEDTLS_SSL_SOME_MODES_USE_MAC, is not
present in Mbed Crypto.
- Use baremetal config in all.sh, as Mbed Crypto's baremetal
configuration does exclude the net module (as it doesn't exist in Mbed
Crypto)
- Reject cmake_subproject_build changes, continuing to link only
libmbedcrypto.
- Reject changes to visualc and associated templates. Mbed Crypto
doesn't need additional logic to handle submodule-sourced headers.
- Avoid adding fuzzers from Mbed TLS. The only relevant fuzzers are the
privkey and pubkey fuzzers, but non-trivial work would be required to
integrate those into Mbed Crypto (more than is comfortable in a merge
commit).
- Reject addition of Docker wrappers for compat.sh and ssl-opt.sh, as
those are not present in Mbed Crypto.
- Remove calls to SSL-related scripts from basic-in-docker.sh
Fix test errors by performing the following:
- Avoid using a link that Doxygen can't seem to resolve in Mbed Crypto,
but can resolve in Mbed TLS. In documentation for
MBEDTLS_CHECK_PARAMS, don't attempt to link to MBEDTLS_PARAM_FAILED.
* origin/development: (339 commits)
Do not build fuzz on windows
No booleans and import config
Removing space before opening parenthesis
Style corrections
Syntax fix
Fixes warnings from MSVC
Add a linker flag to enable gcov in basic-build-test.sh
Update crypto submodule to a revision with the HAVEGE header changes
Test with MBEDTLS_ECP_RESTARTABLE
Allow TODO in code
Use the docstring in the command line help
Split _abi_compliance_command into smaller functions
Record the commits that were compared
Document how to build the typical argument for -s
Allow running /somewhere/else/path/to/abi_check.py
tests: Limit each log to 10 GiB
Warn if VLAs are used
Remove redundant compiler flag
Consistently spell -Wextra
Fix parsing issue when int parameter is in base 16
...
Due to how the checking script is run in docker, worktree_rev is
ambiguous when running rev-parse. We're running it in the checked
out worktree, so we can use HEAD instead, which is unambiguous.
Secure element support is not yet usable in the real world. Only part
of the feature is implemented and the part that's implemented is not
sufficient for real-world uses. A lot of error handling is missing,
and there are no tests.
This commit should be reverted once the feature has stabilized.
Record the commit ID in addition to the symbolic name of the version
being tested. This makes it easier to figure out what has been
compared when reading logs that don't always indicate explicitly what
things like HEAD are.
This makes the title of HTML reports somewhat verbose, but I think
that's a small price to pay.
Secure element support has its own source file, and in addition
requires many hooks in other files. This is a nontrivial amount of
code, so make it optional (but default on).
* origin/pr/2711:
programs: Make `make clean` clean all programs always
ssl_tls: Enable Suite B with subset of ECP curves
windows: Fix Release x64 configuration
platform: Include stdarg.h where needed
timing: Remove redundant include file
net_sockets: Fix typo in net_would_block()
Inherit PlatformToolset from the project configuration. This allow the
project to configure PlatformToolset, and aligns the Release x64 build
with other build types.
Fixes#1430
Use PEP 257 indented docstring style, mostly: always with """, with the
terminating """ on a separate line if the docstring is more than one
line, and with all lines indented to the opening """.
This commit does not change the text to keep the first paragraph single-line.
While the abi-checking script handled comparing only the modules
that were shared between the old and new versions correctly, the
cleanup of the abi dumps only removed what was shared. Change the
cleanup logic to remove all abi dumps instead.
* Rename internal methods and fields to start with an underscore.
* Rename global constants to uppercase.
* Change methods that don't use self to be class methods or static
methods as appropriate.
No behavior change in this commit.
Conflicts:
* library/ssl_cli.c, library/ssl_tls.c:
Removed on the development branch. Keep them removed.
* include/psa/crypto_extra.h, library/psa_crypto_storage.c,
tests/suites/test_suite_psa_crypto.data,
tests/suites/test_suite_psa_crypto.function,
tests/suites/test_suite_psa_crypto_persistent_key.data,
tests/suites/test_suite_psa_crypto_slot_management.data,
tests/suites/test_suite_psa_crypto_slot_management.function:
Modified on the development branch only to implement the enrollment
algorithm, which has been reimplemented on the API branch.
Keep the API branch.
Previously it was disabled as too experimental, which no longer holds. Also,
this option introduces new APIs, so it's not only about an internal
alternative (as the comment in config.pl used to state) - people who request a
full config should get all of the available APIs.
Adapt all.sh: now all builds with full config will also test this option, and
builds with the default config will test without it. Just to be sure, let's
have a build with full config minus this option.
Update documentation of MBEDTLS_USE_PSA_CRYPTO to reflect the status of the
new APIs it enables in Mbed TLS and why they're still opt-in.
Also enable it in scripts/config.pl full, as well as two storage options that
were only blacklisted from full config because they depended on
MBEDTLS_PSA_CRYPTO_C.
Resolve conflicts by performing the following operations:
- Reject changes to files removed during the creation of Mbed Crypto
from Mbed TLS.
- Reject the addition of certificates that would not be used by any
tests, including rejecting the addition of Makefile rules to
generate these certificates.
- Reject changes to error.c referencing modules that are not part of
Mbed Crypto.
* origin/development: (80 commits)
Style fix
Fix test data
Update test data
Add some negative test cases
Fix minor issues
Add ChangeLog entry about listing all SAN
Remove unneeded whitespaces
Fix mingw CI failures
Initialize psa_crypto in ssl test
Check that SAN is not malformed when parsing
Documentation fixes
Fix ChangeLog entry
Fix missing tls version test failures
Fix typo
Fix ChangeLog entry location
Add changeLog entry
Add test for export keys functionality
Add function to retrieve the tls_prf type
Add tests for the public tls_prf API
Add public API for tls_prf
...
Parametrize finite-field Diffie-Hellman key types with a DH group
identifier, in the same way elliptic curve keys are parametrized with
an EC curve identifier.
Define the DH groups from the TLS registry (these are the groups from
RFC 7919).
Replicate the macro definitions and the metadata tests from elliptic
curve identifiers to DH group identifiers.
Define PSA_DH_GROUP_CUSTOM as an implementation-specific extension for
which domain parameters are used to specify the group.
Enabling the USE_CRYPTO_SUBMODULE option causes problems if the
crypto submodule isn't present. For example, when building
mbed-crypto as a submodule, it should use error.c from the parent
project if USE_CRYPTO_SUBMODULE is set. However if the parent
project isn't present, then the build will fail. Only enable it
if the submodule actually exists.
Resolve merge conflicts by performing the following actions:
- Reject changes to deleted files.
- Reject changes to generate_errors.pl and generate_visualc_files.pl.
Don't add an 'include-crypto' option which would attempt to use the
non-existent crypto submodule.
- list-identifiers.sh had the `--internal` option added to it, which
lists identifiers only in internal headers. Add PSA-specific internal
headers to list-identifiers.sh.
* origin/development: (40 commits)
Document the scripts behaviour further
Use check_output instead of Popen
all.sh: Require i686-w64-mingw32-gcc version >= 6
generate_visualc_files.pl: add mbedtls source shadowing by crypto
generate_errors.pl: refactor and simplify the code
Start unused variable with underscore
Correct documentation
generate_errors.pl: typo fix
revert changes to generate_features.pl and generate_query_config.pl
Check that the report directory is a directory
Use namespaces instead of full classes
Fix pylint issues
Don't put abi dumps in subfolders
Add verbose switch to silence all output except the final report
Fetch the remote crypto branch, rather than cloning it
Prefix internal functions with underscore
Add RepoVersion class to make handling of many arguments easier
Reduce indentation levels
Improve documentation
Use optional arguments for setting repositories
...
We've removed all software that depends on or uses the TLS, NET, and
X.509 modules. This means TLS, NET, and X.509 are unused and can be
removed. Remove TLS, NET, and X.509.
Remove TLS and NET options from config files and scripts.
Note that this fails check-names.sh because options that TLS and NET
files use are no longer present in config.h.
* origin/pr/2547:
generate_visualc_files.pl: add mbedtls source shadowing by crypto
generate_errors.pl: refactor and simplify the code
generate_errors.pl: typo fix
revert changes to generate_features.pl and generate_query_config.pl
generate_errors.pl: add mbedtls header shadowing by crypto headers
Add an option to use crypto source files in generated visual c project
Add description of generate_query_config.pl argument
Add crypto includes when generating features in generate_features.pl
Include crypto config when generating query config
Add crypto includes when generating errors in generate_errors.pl
Merge Mbed TLS at f790a6cbee into Mbed Crypto.
Resolve conflicts by performing the following:
- Reject changes to README.md
- Don't add crypto as a submodule
- Remove test/ssl_cert_test from programs/Makefile
- Add cipher.nist_kw test to tests/CMakeLists.txt
- Reject removal of crypto-specific all.sh tests
- Reject update to SSL-specific portion of component_test_valgrind
in all.sh
- Reject addition of ssl-opt.sh testing to component_test_m32_o1 in
all.sh
* tls/development: (87 commits)
Call mbedtls_cipher_free() to reset a cipher context
Don't call mbedtls_cipher_setkey twice
Update crypto submodule
Minor fixes in get certificate policies oid test
Add certificate policy oid x509 extension
cpp_dummy_build: Add missing header psa_util.h
Clarify comment mangled by an earlier refactoring
Add an "out-of-box" component
Run ssl-opt.sh on 32-bit runtime
Don't use debug level 1 for informational messages
Skip uncritical unsupported extensions
Give credit to OSS-Fuzz for #2404
all.sh: remove component_test_new_ecdh_context
Remove crypto-only related components from all.sh
Remove ssl_cert_test sample app
Make CRT callback tests more robust
Rename constant in client2.c
Document and test flags in x509_verify
Fix style issues and a typo
Fix a rebase error
...
Running the generation script with "include_crypto" input parameter set to 1
makes the mbedtls sources being overshadowed by crypto sources.
In case of any duplicate sources, crypto ones take precedence.
There are a number of arguments being passed around, nearly all of
which are duplicated between the old and new versions. Moving these
into a separate class should hopefully make it simpler to follow
what is being done.
As before with wanting to compare revisions across different
repositories, the ability to select the crypto submodule from a
different repository is useful.
We may wish to compare ABI/API between Mbed TLS and Mbed Crypto,
which will cause issues as not all .so files are shared. Only
compare .so files which both libraries have.
As going forward we will have Crypto in a submodule, we will need to
be able to check ABI compatibility between versions using different
submodule versions. For TLS versions that support the submodule, we
will always build using the submodule.
If the Crypto submodule is used, libmbedcrypto.so is not in the main
library folder, but in crypto/library instead. Given this, the script
searches for *.so files and notes their path, in order to create the
dumps correctly.
By default abi-compliance-checker will check the entire ABI/API.
There are internal identifiers that we do not promise compatibility
for, so we want the ability to skip them when checking the ABI/API.
* origin/pr/2464:
Allow main() to lack a docstring.
Silence pylint
check-files.py: readability improvement in permission check
check-files.py: use class fields for class-wide constants
check-files.py: clean up class structure
abi_check.py: Document more methods
check-files.py: document some classes and methods
Fix pylint errors going uncaught
Call pylint3, not pylint
New, documented pylint configuration
Update the crypto submodule to the top of the Mbed Crypto development
branch. This brings in a version of Mbed Crypto that enables building
Mbed Crypto tests that depend on private headers, like
'psa_crypto_invasive.h'.
This also requires updating our config.h to include new configuration
options added to Mbed Crypto. MBEDTLS_PSA_ITS_FILE_C replaces
MBEDTLS_PSA_CRYPTO_STORAGE_FILE_C and MBEDTLS_PSA_CRYPTO_STORAGE_ITS_C.
MBEDTLS_PSA_INJECT_ENTROPY replaces MBEDTLS_PSA_HAS_ITS_IO.
MBEDTLS_PSA_HAS_ITS_IO is not really useful since it doesn't actually
enable anything except the entropy seed file support, which only
requires the ITS interface and not a native implemetation. Remove it.
Now that we have ITS over files, we no longer need a direct backend
for key storage over files. Remove psa_crypto_storage_file and its
tests.
Switch MBEDTLS_PSA_CRYPTO_STORAGE_ITS_C and MBEDTLS_PSA_ITS_FILE_C on
by default. This preserves functionality and test coverage in the
default configuration, but forgets any key previously stored using the
file backend.
As the SSL programs, like ssl_client2 and ssl_server2, are dependent on
SSL and therefore about to be removed, the only consumer of query_config
is the query_compile_time_config test. As such, it makes sense to move
query_config to be next to what uses it.
* origin/development: (113 commits)
Update query_config.c
Fix failure in SSLv3 per-version suites test
Adjust DES exclude lists in test scripts
Clarify 3DES changes in ChangeLog
Fix documentation for 3DES removal
Exclude 3DES tests in test scripts
Fix wording of ChangeLog and 3DES_REMOVE docs
Reduce priority of 3DES ciphersuites
Fix unused variable warning in ssl_parse_certificate_coordinate()
Update the crypto submodule to a78c958
Fix ChangeLog entry to correct release version
Fix typo in x509write test data
Add ChangeLog entry for unused bits in bitstrings
Improve docs for named bitstrings and their usage
Add tests for (named) bitstring to suite_asn1write
Add new function mbedtls_asn1_write_named_bitstring()
Add missing compile time guard in ssl_client2
Update programs/ssl/query_config.c
ssl_client2: Reset peer CRT info string on reconnect
Add further debug statements on assertion failures
...
Additional work done as part of merge:
- Run ./tests/scripts/check-generated-files.sh and check in the
resulting changes to programs/ssl/query_config.c
Additional work done as part of merge:
- Run ./tests/scripts/check-generated-files.sh and check in the
resulting changes to programs/ssl/query_config.c
Declare the owner as psa_key_owner_id_t, of which an implementation
must be provided separately.
Make this a configuration option
MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER, to make the conditional
compilation flow easier to follow. Declare it in config.h to
pacify check_names.sh.
Support for a specific implementation of psa_key_owner_id_t in storage
backends will come in a subsequent commit.
Resolve conflicts by performing the following.
- Take the upstream Mbed TLS ChangeLog verbatim.
- Reject changes to Makefiles and CMake that are related to using Mbed
Crypto as a submodule. It doesn't make sense to use Mbed Crypto as a
submodule of itself.
- Reject README changes, as Mbed Crypto has its own, different README.
- Reject PSA-related changes to config.h. We don't want to disable the
availability of the PSA Crypto API by default in the Mbed Crypto
config.h.
- Don't inadvertently revert dead code removal in
mbedtls_cipher_write_tag() which was added in f2a7529403 ("Fix
double return statement in cipher.c")
- Where Mbed Crypto already had some MBEDTLS_USE_PSA_CRYPTO code (from
past companion PRs) take the latest version from Mbed TLS which
includes integration with MBEDTLS_CHECK_PARAMS.
- Update the version of the shared library files to match what's
currently present in Mbed TLS.
- Reject removal of testing with PSA from config full tests.
- Resolve conflicts in test tests/suites/helpers.function, where both
Mbed Crypto and Mbed TLS both added documentation for TEST_ASSERT.
Combine text from both documentation efforts.
- Reject adding a submodule of ourselves.
- Reject addition of submodule tests in all.sh.
- Reject addition of submodule to library path in
tests/scripts/run-test-suites.pl.
- Avoid using USE_CRYPTO_SUBMODULE=1 in
component_test_use_psa_crypto_full_cmake_asan() in all.sh.
