When working with block cipher modes like GCM(PSA_ALG_IS_AEAD_ON_BLOCK_CIPHER),
aead_multipart_internal_func() should calculate the offset in output buffer
based on output_length, not using the offset of the input buffer(part_offset).
Signed-off-by: Mircea Udrea <mircea.udrea@silexinsight.com>
Move reset transcript for hrr to generic
Reset SHA256 or SHA384 other than both
Rename message layer reset
Add check log for hrr parse successfully
Signed-off-by: XiaokangQian <xiaokang.qian@arm.com>
We keep forgetting to register new test suites in tests/CMakeLists.txt. To
fix this problem once and for all, remove the need for manual registration.
The following test suites were missing:
test_suite_cipher.aria
test_suite_psa_crypto_driver_wrappers
test_suite_psa_crypto_generate_key.generated
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
If no key is loaded in a slot, say "none", not "invalid PK".
When listing two key types, use punctuation that's visibly a sequence
separator (",").
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Run some of the test configs twice, enabling MBEDTLS_USE_PSA_CRYPTO
and MBEDTLS_PSA_CRYPTO_C in one of the runs.
Add relevant comments in these configs.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
The implementation was silently overwriting the IV length to 12
even though the caller passed a different value.
Change the behavior to signal that a different length is not supported.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
The implementation was silently overwriting the IV length to 12
even though the caller passed a different value.
Change the behavior to signal that a different length is not supported.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Add a positive test case where both the client and the server require
authentication and both use a non-CA self-signed certificate.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
psa_aead_encrypt_setup() and psa_aead_decrypt_setup() were returning
PSA_ERROR_INVALID_ARGUMENT, while the same failed checks were producing
PSA_ERROR_NOT_SUPPORTED if they happened in psa_aead_encrypt() or
psa_aead_decrypt().
The PSA Crypto API 1.1 spec will specify PSA_ERROR_INVALID_ARGUMENT
in the case that the supplied algorithm is not an AEAD one.
Also move these shared checks to a helper function, to reduce code
duplication and ensure that the functions remain in sync.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
In the outcome file, report each test case in the file it's in, rather than
reporting them all from ssl-opt. This is more informative and matches what
check_test_cases.py does.
This fixes a bug whereby test cases from opt-testcases/* were not detected
as having run on the CI, because analyze_outcomes.py (which uses
check_test_cases.py) expects them in the containing file whereas they were
reported in ssl-opt.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Update the fork of the compliance test suite, and remove the multipart
AEAD tests from the expected failures list.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
Fix library references, tests and programs.
Testing is performed in the already present all.sh test.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Jinja2 rev 2.10.1 is required for the driver wrappers code gen.
The same is set up in the bionic docker file.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Pylint errors are fixed.
The Python script is improved to take default arguments when not
passed (eg invoked from root of the tree)
check-generated-files.sh and CMakeLists.sh updated.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Extend PSA AEAD testing by adding CCM and ChaChaPoly.
Add more combinations of functions to test the API.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Running `generate_ssl_debug_helpers.py` generates both
`ssl_debug_helpers_generated.c` and `ssl_debug_helpers_generated.h`.
List the `.h` file as well as the `.c` file in `check-generated-files.sh` so
that `check-generated-files.sh -u` will complain if it isn't up to date.
List it in `Makefile` and `CMakeLists.txt` so that parallel builds know when
to wait until the `.h` file is present. In `Makefile`, declare the `.c` file
as depending on the `.h` file for order. This way, a dependency for either
will wait until the `.h` file is present, and since the `.h` file is
generated after the `.c` file, this guarantees that the `.c` file is
present.
This fixes random failures of `make -j` from a fresh checkout.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Expected output generated by OpenSSL (see below) apart from the case
where both password and salt are either NULL or zero length, as OpenSSL
does not support this. For these test cases we have had to use our own
output as that which is expected. Code to generate test cases is as
follows:
#include <openssl/pkcs12.h>
#include <openssl/evp.h>
#include <string.h>
int Keygen_Uni( const char * test_name, unsigned char *pass, int
passlen, unsigned char *salt,
int saltlen, int id, int iter, int n,
unsigned char *out, const EVP_MD
*md_type )
{
size_t index;
printf( "%s\n", test_name );
int ret = PKCS12_key_gen_uni( pass, passlen, salt, saltlen, id, iter,
n, out, md_type );
if( ret != 1 )
{
printf( "Key generation returned %d\n", ret );
}
else
{
for( index = 0; index < n; ++index )
{
printf( "%02x", out[index] );
}
printf( "\n" );
}
printf( "\n" );
}
int main(void)
{
unsigned char out_buf[48];
unsigned char pass[64];
int pass_len;
unsigned char salt[64];
int salt_len;
/* If ID=1, then the pseudorandom bits being produced are to be used
as key material for performing encryption or decryption.
If ID=2, then the pseudorandom bits being produced are to be
used as an IV (Initial Value) for encryption or decryption.
If ID=3, then the pseudorandom bits being produced are
to be used as an integrity key for MACing.
*/
int id = 1;
int iter = 3;
memset( out_buf, 0, sizeof( out_buf ) );
memset( pass, 0, sizeof( pass ) );
memset( salt, 0, sizeof( salt ) );
Keygen_Uni( "Zero length pass and salt", pass, 0, salt, 0, id, iter,
sizeof(out_buf),
out_buf, EVP_md5( ) );
memset( out_buf, 0, sizeof( out_buf ) );
Keygen_Uni( "NULL pass and salt", NULL, 0, NULL, 0, id, iter,
sizeof(out_buf),
out_buf, EVP_md5( ) );
memset( out_buf, 0, sizeof( out_buf ) );
salt[0] = 0x01;
salt[1] = 0x23;
salt[2] = 0x45;
salt[3] = 0x67;
salt[4] = 0x89;
salt[5] = 0xab;
salt[6] = 0xcd;
salt[7] = 0xef;
Keygen_Uni( "Zero length pass", pass, 0, salt, 8, id, iter,
sizeof(out_buf),
out_buf, EVP_md5( ) );
memset( out_buf, 0, sizeof( out_buf ) );
Keygen_Uni( "NULL pass", NULL, 0, salt, 8, id, iter, sizeof(out_buf),
out_buf, EVP_md5( ) );
memset( out_buf, 0, sizeof( out_buf ) );
memset( salt, 0, sizeof( salt ) );
pass[0] = 0x01;
pass[1] = 0x23;
pass[2] = 0x45;
pass[3] = 0x67;
pass[4] = 0x89;
pass[5] = 0xab;
pass[6] = 0xcd;
pass[7] = 0xef;
Keygen_Uni( "Zero length salt", pass, 8, salt, 0, id, iter,
sizeof(out_buf),
out_buf, EVP_md5( ) );
memset( out_buf, 0, sizeof( out_buf ) );
Keygen_Uni( "NULL salt", pass, 8, NULL, 0, id, iter, sizeof(out_buf),
out_buf, EVP_md5( ) );
memset( out_buf, 0, sizeof( out_buf ) );
salt[0] = 0x01;
salt[1] = 0x23;
salt[2] = 0x45;
salt[3] = 0x67;
salt[4] = 0x89;
salt[5] = 0xab;
salt[6] = 0xcd;
salt[7] = 0xef;
Keygen_Uni( "Valid pass and salt", pass, 8, salt, 8, id, iter,
sizeof(out_buf),
out_buf, EVP_md5( ) );
return 0;
}
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Can't call mbedtls_cipher_free(&invalid_ctx) in cleanup if
mbedtls_cipher_init(&invalid_ctx) hasn't been called.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
As we have now a minimal viable implementation of TLS 1.3,
let's remove EXPERIMENTAL from the config option enabling
it.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Run tests with middlebox compatibility enabled but tests
dedicated to middlebox compatibility disabled.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add dependencies on built-in hash of signature/
signature verification and asymmetric
encryption/decryption tests. The dependency is
not added for tests based on SHA-256 as SHA-256
is always present when PSA is involved (necessary
to the PSA core) and that way most of PSA signature
/verification tests are still run when PSA hash
operations are accelerated.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
As PSA signatures rely on built-in hash implementations
(cannot take an advantage of an accelerator for the
time being), chose an available built-in hash for
tests exercising a signature key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add ECDSA and RSA signature acceleration testing
with signature capabilitites removed from the
Mbed TLS library.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The current testing of the PSA configuration is
based on test code located in the library itself.
Remove this code as we are moving to using a
test library instead.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This commit removes the test_psa_crypto_config_basic
all.sh component that can no longer work without
adapting it to the separately compiled test driver
library. This component is replaced by several
components in the following commits to test various
type of acceleration independently.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
PR #3959 has proven that by adding a prefix
(LIBTESTDRIVER1/libtestdriver1_ in this commit) to
all MBEDTLS/PSA_* and mbedtls/psa_* symbols of a copy
of the Mbed TLS library, we can build a library that
can be linked with the Mbed TLS library.
This commit leverages this to build a PSA test driver
library based on the Mbed TLS library code.
The cryptographic features supported by the test
library are defined by:
. a minimal configuration (in the sense of config.h),
see config_test_driver.h
. PSA_WANT_* and PSA_ACCEL_* defined macros.
The PSA_WANT_* macros have to be the same as the ones
used to build the Mbed TLS library the test driver
library is supposed to be linked to as the PSA_WANT_*
macros are used in the definition of structures and
macros that are shared by the PSA crypto core,
Mbed TLS drivers and the driver test library.
The PSA_ACCEL_* macros are intended to define the
cryptographic features that have to be removed
from the Mbed TLS library and thus supported by the
test library in test scenarios. The PSA_ACCEL_* macros
to build the test library are thus mirrored from the
ones to build the Mbed TLS library by extended the
crypto_config.h: see
crypto_config_test_driver_entension.h.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Rename test driver entry points to
libtestdriver1_<name of the Mbed TLS entry point>.
This aligns with the renaming of all Mbed TLS APIs
for the test driver library (that will be put in place
in the following commits) to avoid name conflicts
when linking it with the Mbed TLS library.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In preparation of the driver test entry points to be
provided by a test driver library, move their prototypes
to tests directory.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Define test driver entry points that provide an alternative
to Mbed TLS driver entry points only when the PSA configuration
is used. Their purpose is only to test the PSA configuration
thus there is no good reason to use them out of this scope.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
