Move logic to ccm_starts, ccm_set_lengths, ccm_update_ad,
ccm_update and ccm_finish
Use separate variable to track context state.
Encode first block only if both mbedtls_ccm_starts() and
mbedtls_ccm_set_lengths() were called.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Now that descriptions of error codes no longer have to be on the same line
for the sake of generate_errors.pl, move them to their own line before the
definition. This aligns them with what we do for other definitions, and
means that we no longer need to have very long lines containing both the C
definition and the comment.
```
perl -i -pe 's~^(#define +MBEDTLS_ERR_\w+ +-\w+) */\*[*!]<(.*)\*/~/**$2*/\n$1~' include/mbedtls/*.h
```
This commit does not change the output of generate_errors.pl.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Instances of `mbedtls_ssl_session` represent data enabling session resumption.
With the introduction of TLS 1.3, the format of this data changes. We therefore
need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish
1.2 and 1.3 sessions.
This commit introduces such a TLS-version field to mbedtls_ssl_session.
The change has a few ramifications:
- Session serialization/deserialization routines need to be adjusted.
This is achieved by adding the TLS-version after the header of
Mbed TLS version+config, and by having the subsequent structure
of the serialized data depend on the value of this field.
The details are described in terms of the RFC 8446 presentation language.
The 1.2 session (de)serialization are moved into static helper functions,
while the top-level session (de)serialization only parses the Mbed TLS
version+config header and the TLS-version field, and dispatches according
to the found version.
This way, it will be easy to add support for TLS 1.3 sessions in the future.
- Tests for session serialization need to be adjusted
- Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3,
we will need to have some logic comparing the TLS version of the proposed session
to the negotiated TLS version. For now, however, we only support TLS 1.2,
and no such logic is needed. Instead, we just store the TLS version in the
session structure at the same point when we populate mbedtls_ssl_context.minor_ver.
The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and
`mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved.
However, with both fields being private and explicitly marked so, this can happen
in a later change.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Although checking if the key was symmetric was correct, its easier to
read if we just check the block length is not zero before we use it in a
division.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Enable Curve448 support
Add test vectors to evaluate
* RFC 7748
* a known-answer public key export test.
* a known-answer ECDH (X448) test.
Signed-off-by: Archana <archana.madhavan@silabs.com>
If PSA_CIPHER_ENCRYPT_OUTPUT_SIZE was called on a non symmetric key,
then a divide by zero could happen, as PSA_CIPHER_BLOCK_LENGTH will
return 0 for such a key, and PSA_ROUND_UP_TO_MULTIPLE will divide by the
block length.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Fix initialization of mbedtls_psa_cipher_operation_t by not initializing the mbedtls_cipher_context_t typed field completely.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
According to the PSA specification the PSA_USAGE_SIGN_HASH has the
permission to sign a message as PSA_USAGE_SIGN_MESSAGE. Similarly the
PSA_USAGE_VERIFY_HASH has the permission to verify a message as
PSA_USAGE_VERIFY_MESSAGE. These permission will also be present when
the application queries the usage flags of the key.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Introduce new codes:
* MBEDTLS_ERR_SSL_UNSUPPORTED_EXTENSION
* MBEDTLS_ERR_SSL_NO_APPLICATION_PROTOCOL
These are returned when the corresponding alert is raised.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
This symbol is not declared in our code, so trying to explicitly
link to it causes a doxygen error.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
New name MBEDTLS_ERR_SSL_BAD_CERTIFICATE
Also, replace some instances of MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE
by MBEDTLS_ERR_SSL_DECODE_ERROR and MBEDTLS_ERR_SSL_ILLEGAL_PARAMETER
as fit.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Any config with a version older than 3.0.0 or newer than
MBETLS_VERSION_NUMBER will be rejected.
This does mean that the current development version doesn'T accept *any*
value of MBETLS_CONFIG_VERSION, but this will be fixed when we bump the
version during our normal release process.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
Also remove preprocessor logic for MBEDTLS_CONFIG_FILE, since
build_info.h alreadyy handles it.
This commit was generated using the following script:
# ========================
#!/bin/sh
git ls-files | grep -v '^include/mbedtls/build_info\.h$' | xargs sed -b -E -i '
/^#if !?defined\(MBEDTLS_CONFIG_FILE\)/i#include "mbedtls/build_info.h"
//,/^#endif/d
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
Create a separate header file (mbedtls/build_info.h) to use when
depending on the config options defined in config.h.
Also copy the handling of the MBEDTLS_CONFIG_FILE macro into the new
header, so that the next commit can remove this code from every other
place where config.h used to be included.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
The functions mbedtls_pk_sign(), mbedtls_pk_sign_restartable(),
mbedtls_ecdsa_write_signature() and mbedtls_ecdsa_write_signature_restartable()
now take an extra parameter indicating the size of the output buffer for the
signature.
No change to RSA because for RSA, the output size is trivial to calculate.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix typos in the PBKDF2 documentation
Correct the constraints on PSA_KEY_USAGE_DERIVE and PSA_KEY_USAGE_VERIFY_DERIVATION, aligning them with the note against psa_key_derivation_input_key(). All key inputs must have the required usage flag to permit output or verification.
Correct the constraints on PSA_KEY_DERIVATION_INPUT_SECRET and PSA_KEY_DERIVATION_INPUT_PASSWORD, aligning them with 4feb611. psa_key_derivation_verify_key() does not require the secret/password input to be a key.
Signed-off-by: Andrew Thoelke <andrew.thoelke@arm.com>
Without this parameter, it would be hard for callers to know how many bytes
of output the function wrote into the output buffer. It would be possible,
since the cumulated output must have the same length as the cumulated input,
but it would be cumbersome for the caller to keep track.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Hashes used in RSA-PSS encoding (EMSA-PSS-ENCODE, see §9.1.1 in RFC
8017):
- H1: Hashing the message (step 2)
- H2: Hashing in the salt (step 6)
- H3: Mask generation function (step 9)
According to the standard:
- H1 and H2 MUST be done by the same hash function
- H3 is RECOMMENDED to be the same as the hash used for H1 and H2.
According to the implementation:
- H1 happens outside of the function call. It might or might not happen
and the implementation might or might not be aware of the hash used.
- H2 happens inside the function call, consistency with H1 is not
enforced and might not even be possible to detect.
- H3 is done with the same hash as H2 (with the exception of
mbedtls_rsassa_pss_verify_ext(), which takes a dedicated parameter for
the hash used in the MGF).
Issues with the documentation:
- The comments weren't always clear about the three hashes involved and
often only mentioned two of them (which two varied from function to
function).
- The documentation was giving the impression that the standard
recommends aligning H2 and H1 (which is not a recommendation but a
must).
Signed-off-by: Janos Follath <janos.follath@arm.com>
This saves some code when compiling for Thumb, where access to
fields with offset index > 127 requires intermediate address
computations. Frequently used fields should therefore be located
at the top of the structure, while less frequently used ones --
such as the export callback -- can be moved to the back.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Reverting some deleted tests and changing the deprecated algo
Deleting deprecated headers from /alt-dummy dir
Corrections to the comments
Removal of deleted functions from compat-2.x.h
Corrections to tests/data_files/Makefile
Signed-off-by: TRodziewicz <tomasz.rodziewicz@mobica.com>
For TLS, secp256k1 is deprecated by RFC 8422 §5.1.1. For X.509,
secp256k1 is not deprecated, but it isn't used in practice, especially
in the context of TLS where there isn't much point in having an X.509
certificate which most peers do not support. So remove it from the
default profile. We can add it back later if there is demand.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
TLS used to prefer larger curves, under the idea that a larger curve has a
higher security strength and is therefore harder to attack. However, brute
force attacks are not a practical concern, so this was not particularly
meaningful. If a curve is considered secure enough to be allowed, then we
might as well use it.
So order curves by resource usage. The exact definition of what this means
is purposefully left open. It may include criteria such as performance and
memory usage. Risk of side channels could be a factor as well, although it
didn't affect the current choice.
The current list happens to exactly correspond to the numbers reported by
one run of the benchmark program for "full handshake/s" on my machine.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We stated that curves were listed "in order of preference", but we never
explained what the preference was, so this was not meaningful.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
MBEDTLS_ECP_WINDOW_SIZE is a compromise between memory usage (growing based
on the value) and performance (faster with larger values). There are
disminishing returns as the value grows larger. Based on Manuel's benchmarks
recorded in https://github.com/ARMmbed/mbedtls/issues/4127, 4 is a good
compromise point, with larger values bringing little advantage. So reduce
the default from 6 to 4.
Document the default value as in optimized for performance mostly, but don't
document the specific value, so we may change it later or make it
platform-dependent.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Upgrade the default list of hashes and curves allowed for TLS. The list is
now aligned with X.509 certificate verification: hashes and curves with at
least 255 bits (Curve25519 included), and RSA 2048 and above.
Remove MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE which would no
longer do anything.
Document more precisely what is allowed by default.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Upgrade the default X.509 certificate verification profile
mbedtls_x509_crt_profile_default to the former value of
mbedtls_x509_crt_profile_next, which is hashes and curves with at least 255
bits (Curve25519 included), and RSA 2048 and above.
Document more precisely what goes into the default profile.
Keep the "next" profile unchanged for now.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This makes it easier to ensure that crypto_spe.h is included everywhere it
needs to be, and that it's included early enough to do its job (it must be
included before any mention of psa_xxx() functions with external linkage,
because it defines macros to rename these functions).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
These fields are supposed to be manipulated directly, that's how people
create custom profiles.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
It was used to remove the code used when mbedtls_ecp_mul() received a
NULL RNG parameter. This code is no longer relevant (as the RNG may no
longer be NULL) and will be unconditionally removed in the next commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This is necessary for the case where the public part of an EC keypair
needs to be computed from the private part - either because it was not
included (it's an optional component) or because it was compressed (a
format we can't parse).
This changes the API of two public functions: mbedtls_pk_parse_key() and
mbedtls_pk_parse_keyfile().
Tests and programs have been adapted. Some programs use a non-secure RNG
(from the test library) just to get things to compile and run; in a
future commit this should be improved in order to demonstrate best
practice.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
- mbedtls_ecp_check_pub_priv() because it calls ecp_mul()
- mbedtls_pk_check_pair() because it calls the former
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Fix trivial faulty calls in ECP test suite and ECP/ECJPAKE self-tests (by
adding a dummy RNG).
Several tests suites are not passing yet, as a couple of library
function do call ecp_mul() with a NULL RNG. The complexity of the fixes
range from "simple refactoring" to "requires API changes", so these will
be addressed in separate commits.
This makes the option MBEDTLS_ECP_NO_INTERNAL_RNG, as well as the whole
"internal RNG" code, obsolete. This will be addressed in a future
commit, after getting the test suites to pass again.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
