Special handling of volatile key identifiers is not
needed eventually, they can be handled just as
key identifier in the vendor range.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
In case of a volatile key identifier, no need to check first
the validity of the key identifier, a volatile key identifier
is valid.
Move to a forward search for non-volatile key identifiers as
now key slots with small index are allocated first by
psa_get_empty_key_slot().
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
For consistency across the code base, prefer
persistent over permanent to qualify a key
stored in persistent storage.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When looking for an empty key slot to store
the description of a key, if all key slots
are in use, reuse the first encountered
and unaccessed key slot containing the
description of a permanent key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
When psa_close/destroy/purge_key is called, do not
reset a key slot containing the description
of a persistent key if it is currently accessed.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add a counter of unaccessed slots and use it
in tests to check that at the end of PSA tests
all key slot are unaccessed.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add key slot access counter to be able to
state if a key slot containing the description
of a permanent key can be reset or reset
and re-used.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The lifetime of key attributes now encodes whether a key is
volatile/persistent or not AND its location.
Fix PSA code where the fact that the lifetime encodes
the key location was not taken into account properly.
Fix the impacted tests and add two non regression tests.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Volatile key identifiers in the vendor range are
reserved to volatile keys thus don't allow them
for persistent keys when creating a key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Define psa_key_handle_t to be equal to
mbedtls_svc_key_id_t. Make the handle of a persistent
key be equal to its key identifier. For volatile keys,
make the key handle equal to the volatile key
identifier of the created volatile key.
The unit tests are modified just to make them compile
not to make them run successfully. They are fixed in
the subsequent commits.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Volatile key identifiers are introduced in
PSA Crypto API v1.0.0. They are returned by the APIs
when importing or generating or deriving a volatile key.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
With key usage based on key identifiers and not
key handles (openless APIs), volatile keys will
also have a key identifier. Thus, isolate key
identifier validation from key persistence
validation to clarify that key identifiers
are not specific to persistent keys.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Now that there's a validate_key entry point for drivers, it becomes
much more important to separate the import action (where a key needs
to be validated) from the load action (where a key has been
previously validated, and thus re-validating it would be a waste of
time).
This also exposes why not storing the 'bits' attribute persistently
was a bad idea. The only reason there's a rather large function to
detect bit size is because loading from persistent storage requires
it.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
* Stores bits in psa_persistent_key_storage_format.
* psa_load_persistent_key_into_slot still imports plaintext keys which
ensures that the bits value gets set.
* Updates key specification to match new implementation.
* Expands persistent store and load tests with to check for bits
attribute.
* Removes bits storage from psa_se_key_data_storage_t.
Signed-off-by: Torstein Nesse <torstein.nesse@silabs.com>
With PSA crypto v1.0.0, a volatile key identifier may
contain a owner identifier but no file is associated
to it. Thus rename the type psa_key_file_id_t to
mbedtls_svc_key_id_t to avoid a direct link with a
file when a key identifier involves an owner
identifier.
The new type name is prefixed by mbedtls to highlight
that the type is specific to Mbed TLS implementation
and not defined in the PSA Cryptography API
specification.
The svc in the type name stands for service as this
is the key identifier type from the point of view of
the service providing the Cryptography services.
The service can be completely provided by the present
library or partially in case of a multi-client service.
As a consequence rename as well:
. MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER to
MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
. PSA_KEY_ID_INIT to MBEDTLS_SVC_KEY_ID_INIT
. PSA_KEY_FILE_GET_KEY_ID to MBEDTLS_SVC_KEY_ID_GET_KEY_ID
. psa_key_file_id_make to mbedtls_svc_key_id_make
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Define always psa_key_id_t as defined in the PSA
Cryptography API specification independently of
whether the MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER
configuration file is set or not.
As a consequence, get rid of `psa_app_key_id_t` that is
not needed anymore.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The purpose of this commit and the following is for
psa_key_id_t to always be as defined by the PSA
Cryptography API specification.
Currently psa_key_id_t departs from its specification
definition when MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER
configuration flag is set. In that configuration, it is set
to be equal to psa_key_file_id_t which in that configuration
encodes an owner identifier along the key identifier.
Type psa_key_file_id_t was meant to be the key identifier type
used throughout the library code. If
MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER is set it
includes both a key and owner identifier, otherwise it is
equal to psa_key_id_t.
It has not been the key identifier type throughout the
library so far because when the PSA Cryptography
specification was developped the library Doxygen
documentation was used to generate the PSA Cryptography API
specification thus the need to use psa_key_id_t and not
psa_key_file_id_t.
As this constraint does not hold anymore, move
to psa_key_file_id_t as the key identifier type throughout
the library code.
By the way, this commit updates the key identifier
initialization in the tests to be compatible with a
composit key identifier. A psa_key_id_make()
inline function is introduced to initialize key
identifiers (composit ot not) at runtime.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
As a result, the copyright of contributors other than Arm is now
acknowledged, and the years of publishing are no longer tracked in the
source files.
Also remove the now-redundant lines declaring that the files are part of
MbedTLS.
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find files
find '(' -path './.git' -o -path './3rdparty' ')' -prune -o -type f -print | xargs sed -bi '
# Replace copyright attribution line
s/Copyright.*Arm.*/Copyright The Mbed TLS Contributors/I
# Remove redundant declaration and the preceding line
$!N
/This file is part of Mbed TLS/Id
P
D
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
In library source files, include "common.h", which takes care of
including "mbedtls/config.h" (or the alternative MBEDTLS_CONFIG_FILE)
and other things that are used throughout the library.
FROM=$'#if !defined(MBEDTLS_CONFIG_FILE)\n#include "mbedtls/config.h"\n#else\n#include MBEDTLS_CONFIG_FILE\n#endif' perl -i -0777 -pe 's~\Q$ENV{FROM}~#include "common.h"~' library/*.c 3rdparty/*/library/*.c scripts/data_files/error.fmt scripts/data_files/version_features.fmt
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Also normalize the first line of the copyright headers.
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find scripts
find -path './.git' -prune -o '(' -name '*.c' -o -name '*.cpp' -o -name '*.fmt' -o -name '*.h' ')' -print | xargs sed -i '
# Normalize the first line of the copyright headers (no text on the first line of a block comment)
/^\/\*.*Copyright.*Arm/I {
i\
/*
s/^\// /
}
/Copyright.*Arm/I {
# Print copyright declaration
p
# Read the two lines immediately following the copyright declaration
N
N
# Insert Apache header if it is missing
/SPDX/! i\
* SPDX-License-Identifier: Apache-2.0\
*\
* Licensed under the Apache License, Version 2.0 (the "License"); you may\
* not use this file except in compliance with the License.\
* You may obtain a copy of the License at\
*\
* http://www.apache.org/licenses/LICENSE-2.0\
*\
* Unless required by applicable law or agreed to in writing, software\
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT\
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\
* See the License for the specific language governing permissions and\
* limitations under the License.
# Clear copyright declaration from buffer
D
}
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
Avoid compiler errors when MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER
is set by using the application ID type.
[Error] psa_crypto_slot_management.c@175,9: used type 'psa_key_id_t' (aka 'psa_key_file_id_t') where arithmetic or pointer type is required
This function no longer modifies anything, so it doesn't actually
allocate the slot. Now, it just returns the empty key slot, and it's
up to the caller to cause the slot to be in use (or not).
The flag to mark key slots as allocated was introduced to mark slots
that are claimed and in use, but do not have key material yet, at a
time when creating a key used several API functions: allocate a slot,
then progressively set its metadata, and finally create the key
material. Now that all of these steps are combined into a single
API function call, the notion of allocated-but-not-filled slot is no
longer relevant. So remove the corresponding flag.
A slot is occupied iff there is a key in it. (For a key in a secure
element, the key material is not present, but the slot contains the
key metadata.) This key must have a type which is nonzero, so use this
as an indicator that a slot is in use.
There is now a field for the key size in the key slot in memory. Use
it.
This makes psa_get_key_attributes() marginally faster at the expense
of memory that is available anyway in the current memory layout (16
bits for the size, 16 bits for flags). That's not the goal, though:
the goal is to simplify the code, in particular to make it more
uniform between transparent keys (whose size can be recomputed) and
keys in secure elements (whose size cannot be recomputed).
For keys in a secure element, the bit size is now saved by serializing
the type psa_key_bits_t (which is an alias for uint16_t) rather than
size_t.
Change the type of key slots in memory to use
psa_core_key_attributes_t rather than separate fields. The goal is to
simplify some parts of the code. This commit only does the mechanical
replacement, not the substitution.
The bit-field `allocate` is now a flag `PSA_KEY_SLOT_FLAG_ALLOCATED`
in the `flags` field.
Write accessor functions for flags.
Key slots now contain a bit size field which is currently unused.
Subsequent commits will make use of it.
Move the "core attributes" to a substructure of psa_key_attribute_t.
The motivation is to be able to use the new structure
psa_core_key_attributes_t internally.
For a key in a secure element, save the bit size alongside the slot
number.
This is a quick-and-dirty implementation where the storage format
depends on sizeof(size_t), which is fragile. This should be replaced
by a more robust implementation before going into production.
Pass information via a key attribute structure rather than as separate
parameters to psa_crypto_storage functions. This makes it easier to
maintain the code when the metadata of a key evolves.
This has negligible impact on code size (+4B with "gcc -Os" on x86_64).
When creating a key with a lifetime that places it in a secure
element, retrieve the appropriate driver table entry.
This commit doesn't yet achieve behavior: so far the code only
retrieves the driver, it doesn't call the driver.
Now that psa_allocate_key() is no longer a public function, expose
psa_internal_allocate_key_slot() instead, which provides a pointer to
the slot to its caller.
Remove the key creation functions from before the attribute-based API,
i.e. the key creation functions that worked by allocating a slot, then
setting metadata through the handle and finally creating key material.
“Tampering detected” was misleading because in the real world it can
also arise due to a software bug. “Corruption detected” is neutral and
more precisely reflects what can trigger the error.
perl -i -pe 's/PSA_ERROR_TAMPERING_DETECTED/PSA_ERROR_CORRUPTION_DETECTED/gi' $(git ls-files)
Only allow creating keys in the application (user) range. Allow
opening keys in the implementation (vendor) range as well.
Compared with what the implementation allowed, which was undocumented:
0 is now allowed; values from 0x40000000 to 0xfffeffff are now
forbidden.
Change the scope of key identifiers to be global, rather than
per lifetime. As a result, you now need to specify the lifetime of a
key only when creating it.
Differentiate between _key identifiers_, which are always `uint32_t`,
and _key file identifiers_, which are platform-dependent. Normally,
the two are the same.
In `psa/crypto_platform.h`, define `psa_app_key_id_t` (which is always
32 bits, the standard key identifier type) and
`psa_key_file_id_t` (which will be different in some service builds).
A subsequent commit will introduce a platform where the two are different.
It would make sense for the function declarations in `psa/crypto.h` to
use `psa_key_file_id_t`. However this file is currently part of the
PSA Crypto API specification, so it must stick to the standard type
`psa_key_id_t`. Hence, as long as the specification and Mbed Crypto
are not separate, use the implementation-specific file
`psa/crypto_platform.h` to define `psa_key_id_t` as `psa_key_file_id_t`.
In the library, systematically use `psa_key_file_id_t`.
perl -i -pe 's/psa_key_id_t/psa_key_file_id_t/g' library/*.[hc]
PSA_MAX_PERSISTENT_KEY_IDENTIFIER was actually one plus the maximum
key identifier. Change it to be the maximum value, and change the code
that uses it accordingly.
There is no semantic change here (the maximum value hasn't changed).
This commit only makes the implementation clearer.
Remove the type and bits arguments to psa_allocate_key() and
psa_create_key(). They can be useful if the implementation wants to
know exactly how much space to allocate for the slot, but many
implementations (including ours) don't care, and it's possible to work
around their lack by deferring size-dependent actions to the time when
the key material is created. They are a burden to applications and
make the API more complex, and the benefits aren't worth it.
Change the API and adapt the implementation, the units test and the
sample code accordingly.
When MBEDTLS_PSA_CRYPTO_SPM is defined, the code is being built for SPM (Secure Partition Manager)
integration which separates the code into two parts: NSPE (Non-Secure Processing Environment) and SPE
(Secure Processing Environment). When building for the SPE, an additional header file should be included.
Some of the documentation is obsolete in its reference to key slots
when it should discuss key handles. This may require a further pass,
possibly with some reorganization of error codes.
Update the documentation of functions that modify key slots (key
material creation and psa_set_key_policy()) to discuss how they affect
storage.
Move psa_load_persistent_key_into_slot,
psa_internal_make_key_persistent and psa_internal_release_key_slot to
the slot management module.
Expose psa_import_key_into_slot from the core.
After this commit, there are no longer any functions declared in
psa_crypto_slot_management.h and defined in psa_crypto.c. There are
still function calls in both directions between psa_crypto.c and
psa_crypto_slot_management.c.
Move the key slot array and its initialization and wiping to the slot
management module.
Also move the lowest-level key slot access function psa_get_key_slot
and the auxiliary function for slot allocation
psa_internal_allocate_key_slot to the slot management module.
Implement psa_allocate_key, psa_open_key, psa_create_key,
psa_close_key.
Add support for keys designated to handles to psa_get_key_slot, and
thereby to the whole API.
Allocated and non-allocated keys can coexist. This is a temporary
stage in order to transition from the use of direct slot numbers to
allocated handles only. Once all the tests and sample programs have
been migrated to use handles, the implementation will be simplified
and made more robust with support for handles only.
