Test the behavior of the getter/setter functions.
Test that psa_get_key_slot_number() reports a slot number for a key in
a secure element, and doesn't report a slot number for a key that is
not in a secure element.
Test that psa_get_key_slot_number() reports the correct slot number
for a key in a secure element.
Add tests that call psa_generate_random() (possibly via
psa_generate_key()) with a size that's larger than
MBEDTLS_CTR_DRBG_MAX_REQUEST. This causes psa_generate_random() to
fail because it calls mbedtls_ctr_drbg_random() without taking the
maximum request size of CTR_DRBG into account.
Non-regression test for #206
65528 bits is more than any reasonable key until we start supporting
post-quantum cryptography.
This limit is chosen to allow bit-sizes to be stored in 16 bits, with
65535 left to indicate an invalid value. It's a whole number of bytes,
which facilitates some calculations, in particular allowing a key of
exactly PSA_CRYPTO_MAX_STORAGE_SIZE to be created but not one bit
more.
As a resource usage limit, this is arguably too large, but that's out
of scope of the current commit.
Test that key import, generation and derivation reject overly large
sizes.
Add a few test cases to ensure that alg=0 in policy does not allow
using the key for an operation.
Add a test case to ensure that ANY_HASH does not have a wildcard
meaning for HMAC.
This change affects the psa_key_derivation_s structure. With the buffer
removed from the union, it is empty if MBEDTLS_MD_C is not defined.
We can avoid undefined behaviour by adding a new dummy field that is
always present or make the whole union conditional on MBEDTLS_MD_C.
In this latter case the initialiser macro has to depend on MBEDTLS_MD_C
as well. Furthermore the first structure would be either
psa_hkdf_key_derivation_t or psa_tls12_prf_key_derivation_t both of
which are very deep and would make the initialisation macro difficult
to maintain, therefore we go with the first option.
Part of the tests are adapted in this commit, another part is already
covered by the derive_input tests and some of them are not applicable to
the new API (the new API does not request capacity at the setup stage).
The test coverage temporarily drops with this commit, the two test cases
conserning capacity will be re-added in a later commit.
In the 1.0 API some functionality has been split from the
psa_key_derivation_setup() function and is now done with the
psa_key_derivation_input_*() functions. The new tests maintain the
existing test coverage of this functionality.
Add the compile time option PSA_PRE_1_0_KEY_DERIVATION. If this is not
turned on, then the function `psa_key_derivation()` is removed.
Most of the tests regarding key derivation haven't been adapted to the
new API yet and some of them have only been adapted partially. When this
new option is turned off, the tests using the old API and test cases
using the old API of partially adapted tests are skipped.
The sole purpose of this option is to make the transition to the new API
smoother. Once the transition is complete it can and should be removed
along with the old API and its implementation.
Add parameters to psa_copy_key tests for the enrollment algorithm (alg2).
This commit only tests with alg2=0, which is equivalent to not setting
an enrollment algorithm.
Manually cherry-picked from ca5bed742f
by taking that patch, replacing KEYPAIR by KEY_PAIR
throughout (renaming applied in this branch), and discarding parts
about import_twice in test_suite_psa_crypto (this test function was
removed from this branch).
When importing a private elliptic curve key, require the input to have
exactly the right size. RFC 5915 requires the right size (you aren't
allow to omit leading zeros). A different buffer size likely means
that something is wrong, e.g. a mismatch between the declared key type
and the actual data.
psa_set_key_lifetime and psa_set_key_id aren't pure setters: they also
set the other attribute in some conditions. Add dedicated tests for
this behavior.
Split the test function copy_key into two: one for success and one for
failure.
Add failure tests where the attributes specify an incorrect type or size.
Read extra data from the domain parameters in the attribute structure
instead of taking an argument on the function call.
Implement this for RSA key generation, where the public exponent can
be set as a domain parameter.
Add tests that generate RSA keys with various public exponents.
Instead of passing a separate parameter for the key size to
psa_generate_key and psa_generator_import_key, set it through the
attributes, like the key type and other metadata.
Update persistent_key_load_key_from_storage to the new attribute-based
key creation interface. I tweaked the code a little to make it simpler
and more robust without changing the core logic.
With the attribute-based key creation API, it is no longer possible to
have a handle to a slot that does not hold key material. Remove all
corresponding tests.
Implement attribute querying.
Test attribute getters and setters. Use psa_get_key_attributes instead
of the deprecated functions psa_get_key_policy or
psa_get_key_information in most tests.
Since the format change for EC public key import from
SubjectPublicKeyInfo to the ECPoint content, it is no longer possible
to import a key with metadata marking it as ECDH-only. This test was
converted systematically but now no longer has any purpose since the
public key is now like any other public key.
Allow either the key derivation step or the key agreement step to
fail.
These tests should be split into three groups: key derivation setup
tests with an algorithm that includes a key agreement step, and
multipart key agreement failure tests, and raw key agreement failure
tests.
Merge the Mbed Crypto development branch a little after
mbedcrypto-1.0.0 into the PSA Crypto API 1.0 beta branch a little
after beta 2.
Summary of merge conflicts:
* Some features (psa_copy_key, public key format without
SubjectPublicKeyInfo wrapping) went into both sides, but with a few
improvements on the implementation side. For those, take the
implementation side.
* The key derivation API changed considerably on the API side. This
merge commit generally goes with the updated API except in the tests
where it keeps some aspects of the implementation.
Due to the divergence between the two branches on key derivation and
key agreement, test_suite_psa_crypto does not compile. This will be
resolved in subsequent commits.
Extend hash bad order test in line with the new bad order tests for MAC
and cipher, covering more cases and making comments and test layout
consistent.
Ensure that when doing hash operations out of order, PSA_ERROR_BAD_STATE
is returned as documented in crypto.h and the PSA Crypto specification.
In multipart cipher tests, test that each step of psa_cipher_update
produces output of the expected length. The length is hard-coded in
the test data since it depends on the mode.
The length of the output of psa_cipher_finish is effectively tested
because it's the total output length minus the length produced by the
update steps.
Test data obtained with Python+PyCrypto:
AES.new(key, mode=AES.MODE_CTR, counter=Crypto.Util.Counter.new(128, initial_value=0x2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a2a)).encrypt(plaintext.decode('hex')).encode('hex')
For must-fail asymmetric decryption tests, add an output size parameter
so that tests can directly control what output buffer size they allocate
and use independently from the key size used. This enables better
testing of behavior with various output buffer sizes.
Test a few cases. The logic to combine the constraint is similar to
the logic to combine the source and target, so it's ok to have less
parameter domain coverage for constraints.
Split the testing into tests that exercise policies in
test_suite_psa_crypto and tests that exercise slot content (slot
states, key material) in test_suite_psa_crypto_slot_management.
Test various cases of source and target policies with and without
wildcards. Missing: testing of the policy constraint on psa_copy_key
itself.
Test several key types (raw data, AES, RSA). Test with the
source or target being persistent.
Add failure tests (incompatible policies, source slot empty, target
slot occupied).
Remove front matter from our EC key format, to make it just the contents
of an ECPoint as defined by SEC1 section 2.3.3.
As a consequence of the simplification, remove the restriction on not
being able to use an ECDH key with ECDSA. There is no longer any OID
specified when importing a key, so we can't reject importing of an ECDH
key for the purpose of ECDSA based on the OID.
Remove pkcs-1 and rsaEncryption front matter from RSA public keys. Move
code that was shared between RSA and other key types (like EC keys) to
be used only with non-RSA keys.
Change the key derivation API to take inputs in multiple steps,
instead of a single one-site-fits-poorly function.
Conflicts:
* include/psa/crypto.h: merge independent changes in the documentation
of psa_key_agreement (public_key from the work on public key formats
vs general description and other parameters in the work on key derivation).
* tests/suites/test_suite_psa_crypto.data: update the key agreement
tests from the work on key derivation to the format from the work on
public key formats.
* tests/suites/test_suite_psa_crypto_metadata.function: reconcile the
addition of unrelated ALG_IS_xxx macros
Get rid of "key selection" algorithms (of which there was only one:
raw key selection).
Encode key agreement by combining a raw key agreement with a KDF,
rather than passing the KDF as an argument of a key agreement macro.
Remove front matter from our EC key format, to make it just the contents
of an ECPoint as defined by SEC1 section 2.3.3.
As a consequence of the simplification, remove the restriction on not
being able to use an ECDH key with ECDSA. There is no longer any OID
specified when importing a key, so we can't reject importing of an ECDH
key for the purpose of ECDSA based on the OID.
You can use PSA_ALG_ANY_HASH to build the algorithm value for a
hash-and-sign algorithm in a policy. Then the policy allows usage with
this hash-and-sign family with any hash.
Test that PSA_ALG_ANY_HASH-based policies allow a specific hash, but
not a different hash-and-sign family. Test that PSA_ALG_ANY_HASH is
not valid for operations, only in policies.
Remove pkcs-1 and rsaEncryption front matter from RSA public keys. Move
code that was shared between RSA and other key types (like EC keys) to
be used only with non-RSA keys.
Add new initializers for cipher operation objects and use them in our
tests and library code. Prefer using the macro initializers due to their
straightforwardness.
Add new initializers for MAC operation objects and use them in our tests
and library code. Prefer using the macro initializers due to their
straightforwardness.
Add new initializers for hash operation objects and use them in our
tests and library code. Prefer using the macro initializers due to their
straightforwardness.
Add new initializers for key policies and use them in our docs, example
programs, tests, and library code. Prefer using the macro initializers
due to their straightforwardness.
This commit finishes the removal of support for direct access to key
slots in psa_crypto.c.
This marks the end of the necessary phase of the transition to key
handles. The code should subsequently be refactored to move key slot
management from psa_crypto.c to psa_crypto_slot_management.c.
Switch from the direct use of slot numbers to handles allocated by
psa_allocate_key.
This commit does not affect persistent key tests except for the one
test function in test_suite_psa_crypto that uses persistent keys
(persistent_key_load_key_from_storage).
The general principle for each function is:
* Change `psa_key_slot_t slot` to `psa_key_handle_t handle`.
* Call psa_allocate_key() before setting the policy of the slot,
or before creating key material in functions that don't set a policy.
* Some PSA_ERROR_EMPTY_SLOT errors become PSA_ERROR_INVALID_HANDLE
because there is now a distinction between not having a valid
handle, and having a valid handle to a slot that doesn't contain key
material.
* In tests that use symmetric keys, calculate the max_bits parameters
of psa_allocate_key() from the key data size. In tests where the key
may be asymmetric, call an auxiliary macro KEY_BITS_FROM_DATA which
returns an overapproximation. There's no good way to find a good
value for max_bits with the API, I think the API should be tweaked.
Implement psa_allocate_key, psa_open_key, psa_create_key,
psa_close_key.
Add support for keys designated to handles to psa_get_key_slot, and
thereby to the whole API.
Allocated and non-allocated keys can coexist. This is a temporary
stage in order to transition from the use of direct slot numbers to
allocated handles only. Once all the tests and sample programs have
been migrated to use handles, the implementation will be simplified
and made more robust with support for handles only.
