Some sanitizers default to displaying an error message and recovering.
This could result in a test being recorded as passing despite a
complaint from the sanitizer. Turn off sanitizer recovery to avoid
this risk.
* origin/pr/2843: (26 commits)
Make hyperlink a hyperlink in every markdown flavor
Update the crypto submodule to be the same as development
Document test case descriptions
Restore MBEDTLS_TEST_OUTCOME_FILE after test_default_out_of_box
ssl-opt.sh: Fix some test case descriptions
Reject non-ASCII characters in test case descriptions
Process input files as binary
Factor description-checking code into a common function
Fix cosmetic error in warnings
Fix regex matching run_test calls in ssl-opt.sh
all.sh: run check-test-cases.py
Better information messages for quick checks
Fix configuration short name in key-exchanges.pl
Make test case descriptions unique
New test script check-test-cases.py
Document the test outcome file
Create infrastructure for architecture documents in Markdown
all.sh --outcome-file creates an outcome file
Set meaningful test configuration names when running tests
ssl-opt: remove semicolons from test case descriptions
...
Since components run in the main process, unsetting
MBEDTLS_TEST_OUTCOME_FILE unset it in subsequent components as well.
To avoid this, save and restore the value.
(Making each component run in a subshell would be a better solution,
but it would be a much bigger change.)
Fix copypasta in some test cases with
MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_CERTIFICATES enabled.
Add unique suffix to the two
"DTLS fragmenting: proxy MTU: auto-reduction" test cases.
This is testing with $kex, not without $kex, so use $kex, not "-$kex".
In test-ref-configs.pl, use $conf rather than "$conf". This is purely
a matter of Perl coding style.
This script checks test case descriptions in test_suite_*.data and
ssl-opt.sh.
It reports the following issues:
* Error: forbidden character in a test case description.
* Error: Duplicate test description.
* Warning: Test description is too long.
* origin/pr/2765: (28 commits)
Add set+get tests
Consolidate tests for set with/without values
config.py testing: also test the get command
Compatibility redirect: add copyright notice
Compatibility redirect: if python3 is not available, try python
Fix config.py output when a symbol has acquired or lost a value
Remove redundant test case
cmake: update interpreter requirement for the test suite generator
cmake: fix Python requirement
Test script for config.py
Documentation improvements
Fix "#define ... not found" error when using the default file name
Fix "--force set" without a value sneaking a None in
Fix --force requiring an argument
Fix Config.unset() making the name known
Also search config.h near the script
Report an error if switching to Python fails
Fix 'config.py set' without --force
Fix encoding errors
Print help when invoked with no arguments
...
The tests were not covering get for a symbol with a value. No symbol
has an uncommented value in the default config.h. (Actually there's
_CRT_SECURE_NO_DEPRECATE, but that's a bit of a hack that this script
is not expected to handle, so don't use it).
Add tests of "get FOO" after "set FOO" and "set FOO value", so that we
have coverage for "get FOO" when "FOO" has a value.
We currently test setting a symbol with a value even if it didn't
originally had one and vice versa. So there's no need to have separate
lists of symbols to test with. Just test everything we want to test
with each symbol.
Set MBEDTLS_TEST_PLATFORM and MBEDTLS_TEST_CONFIGURATION to meaningful
values in all.sh. These environment variables are used when
writing an outcome file, which happens if MBEDTLS_TEST_OUTCOME_FILE is
also set.
When running one of the try-multiple-configuration scripts, set
MBEDTLS_TEST_CONFIGURATION to a value that uniquely describes the
configuration.
Don't use semicolons in test case descriptions. The test outcome file
is a semicolon-separated CSV file without quotes to keep things
simple, so fields in that file may not contain semicolons.
If the environment variable MBEDTLS_TEST_OUTCOME_FILE is set, then for
each test case, write a line to the file with the given name, of the
form
PLATFORM;CONFIGURATION;ssl-opt;TEST CASE DESCRIPTION;PASS/FAIL/SKIP;CAUSE
PLATFORM and CONFIGURATION come from the environment variables
MBEDTLS_TEST_PLATFORM and MBEDTLS_TEST_CONFIGURATION. If these
variables are unset, the script uses some easily-calculated values.
If the environment variable MBEDTLS_TEST_OUTCOME_FILE is set, then for
each test case, write a line to the file with the given name, of the
form
PLATFORM;CONFIGURATION;TEST SUITE;TEST CASE DESCRIPTION;PASS/FAIL/SKIP;CAUSE
PLATFORM and CONFIGURATION come from the environment variables
MBEDTLS_TEST_PLATFORM and MBEDTLS_TEST_CONFIGURATION.
Errors while writing the test outcome file are not considered fatal,
and are not reported except for an error initially opening the file.
This is in line with other write errors that are not checked.
Normally a valueless symbol remains valueless and a symbol with a
value keeps having one. But just in case a symbol does get changed
from valueless to having a value, make sure there's a space between
the symbol and the value. And if a symbol gets changed from having a
value to valueless, strip trailing whitespace.
Add corresponding tests.
Also fix the case of a valueless symbol added with the set method,
which would have resulted in attempting to use None as a string. This
only happened with the Python API, not with the command line API.
The test suite generator has been a Python script for a long time,
but tests/CMakeLists.txt still looked for Perl. The reference to
PYTHON_INTERP only worked due to a call to find_package(PythonInterp)
in the toplevel CMakeLists.txt, and cmake would not have printed the
expected error message if python was not available.
Run config.py with various options and store the results in files.
This script also supports the now-removed config.pl.
This is a framework to run non-regression tests on config.py: run it
with the old version, run it with the new version, and compare the
output.
This is deliberately not a functional test suite so that we don't need
to maintain a set of known outputs. When something changes in
config.py (or config.h), run the script before, run it after, and
check manually whether any differences in the output are acceptable.
git grep -Fl /config.pl | xargs sed -i -e 's!/config\.pl!/config.py!g'
Also:
* Change one comment in include/mbedtls/check_config.h.
* Change PERL to PYTHON in CMakeLists.txt.
* origin/pr/2469:
Enable MBEDTLS_MEMORY_DEBUG in memory buffer alloc test in all.sh
Remove unnecessary memory buffer alloc unsets
Disable DTLS proxy tests for MEMORY_BUFFER_ALLOC test
all.sh: restructure memory allocator tests
Add missing dependency in memory buffer alloc set in all.sh
Don't set MBEDTLS_MEMORY_DEBUG through `scripts/config.pl full`
Add cfg dep MBEDTLS_MEMORY_DEBUG->MBEDTLS_MEMORY_BUFFER_ALLOC_C
Fix memory leak in CSR test suite on failure
Fix a memory leak in x509write test suite
Add all.sh run with full config and ASan enabled
Add all.sh run with MBEDTLS_MEMORY_BUFFER_ALLOC_C enabled
Update documentation of exceptions for `config.pl full`
Adapt all.sh to removal of buffer allocator from full config
Disable memory buffer allocator in full config
Check dependencies of MBEDTLS_MEMORY_BACKTRACE in check_config.h
Tweak test data for one test case to not rely on mbedtls_asn1_get_int
lacking support for leading zeros. Instead, use a number that is
actually out of range for int.
Tweak test data for one test case to not rely on
mbedtls_asn1_get_bitstring_null rejecting bitstrings shorter than two
octets. Instead, try bit strings that are genuinely invalid, or have a
nonzero number of unused bits.
Add a test case with a correct empty signature. This is commented out
because asn1parse currently does not support this. Uncomment it when
asn1parse is updated to support this.
This leak wasn't discovered by the CI because the only test in
all.sh exercising the respective path enabled the custom memory
buffer allocator implementations of calloc() and free(), hence
bypassing ASan.
