The link to the DRBG paper points to the March 2007 version, the same as the
original link (rather than the latest version).
The amended Rijndael paper has a two-page "Note on naming" prefix.
Fixes#7193
Signed-off-by: Tom Cosgrove <tom.cosgrove@arm.com>
Some source files included platform.h in a nested conditional. The previous
commit "Include platform.h unconditionally: automatic part" only removed
the outer conditional. This commit removes the inner conditional.
This commit once again replaces most occurrences of conditional inclusion of
platform.h, using the following code:
```
perl -i -0777 -pe 's!#if.*\n#include "mbedtls/platform.h"\n(#else.*\n(#define (mbedtls|MBEDTLS)_.*\n|#include <(stdarg|stddef|stdio|stdlib|string|time)\.h>\n)*)?#endif.*!#include "mbedtls/platform.h"!mg' $(git grep -l '#include "mbedtls/platform.h"')
```
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We used to include platform.h only when MBEDTLS_PLATFORM_C was enabled, and
to define ad hoc replacements for mbedtls_xxx functions on a case-by-case
basis when MBEDTLS_PLATFORM_C was disabled. The only reason for this
complication was to allow building individual source modules without copying
platform.h. This is not something we support or recommend anymore, so get
rid of the complication: include platform.h unconditionally.
There should be no change in behavior since just including the header should
not change the behavior of a program.
This commit replaces most occurrences of conditional inclusion of
platform.h, using the following code:
```
perl -i -0777 -pe 's!#if.*\n#include "mbedtls/platform.h"\n(#else.*\n(#define (mbedtls|MBEDTLS)_.*\n|#include <(stdarg|stddef|stdio|stdlib|string|time)\.h>\n)*)?#endif.*!#include "mbedtls/platform.h"!mg' $(git grep -l '#include "mbedtls/platform.h"')
```
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Since 11e9310 add mbedtls_aes_init call in mbedtls_ctr_drbg_init, it
should not init aes_ctx again in mbedtls_ctr_drbg_seed.
Signed-off-by: kXuan <kxuanobj@gmail.com>
Application may enabled AES_ALT and define mbedtls_aes_context by its own.
The initial state of user-defined mbedtls_aes_context may not all byte zero.
In mbedtls_ctr_drbg_init, the code set all byte to zero, including the AES
context nested in the ctr_drbg context.
And in mbedtls_ctr_drbg_free, the code calls mbedtls_aes_free on an AES
context without calling mbedtls_aes_init.
If user-defined AES context requires an non-zero init, the mbedtls_aes_free
call in mbedtls_ctr_drbg_free is illegal.
This patch fix this issue by add mbedtls_aes_init in mbedtls_ctr_drbg_init.
So aes context will always be initialized to correct state.
Signed-off-by: kXuan <kxuanobj@gmail.com>
After opening a file containing sensitive data, call mbedtls_setbuf() to
disable buffering. This way, we don't expose sensitive data to a memory
disclosure vulnerability in a buffer outside our control.
This commit adds a call to mbedtls_setbuf() after each call to fopen(),
except:
* In ctr_drbg.c, in load_file(), because this is only used for DH parameters
and they are not confidential data.
* In psa_its_file.c, in psa_its_remove(), because the file is only opened
to check its existence, we don't read data from it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
exchange groups of the byte reading macros with MBEDTLS_PUT_UINTxyz
and then shift the pointer afterwards. Easier to read as you can
see how big the data is that you are putting in, and in the case of
UINT32 AND UINT64 it saves some vertical space.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
As per tests/scripts/check-names.sh, macros in
library/ header files should be prefixed with
MBEDTLS_
The macro functions in common.h where also indented
to comply with the same test
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
To improve readability by saving horizontal and vertical space.
Removed unecessary & 0xFF.
Byte reading macros implemented in library/common.h, All files
containing "& 0xff" were modified.
Comments/Documentation not yet added to the macro definitions.
Fixes#4274
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
mbedtls_ctr_drbg_free() left a mutex in the initialized state. This
caused a resource leak on platforms where mbedtls_mutex_init()
allocates resources.
To fix this, mbedtls_ctr_drbg_free() no longer reinitializes the
mutex. To preserve the property that mbedtls_ctr_drbg_free() leaves
the object in an initialized state, which is generally true throughout
the library except regarding mutex objects on some platforms, no
longer initialize the mutex in mbedtls_ctr_drbg_init(). Since the
mutex is only used after seeding, and seeding is only permitted once,
call mbedtls_mutex_init() as part of the seeding process.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_ctr_drbg_set_reseed_interval() and
mbedtls_hmac_drbg_set_reseed_interval() can now be called before
their seed functions and the reseed_interval value will persist.
Previously it would be overwritten with the default value.
*_drbg_reseed_interval is now set in init() and free().
mbedtls_ctr_drbg_free() and mbedtls_hmac_drbg_free() now
reset the drbg context to the state immediately after init().
Tests:
- Added test to check that DRBG reseeds when reseed_counter
reaches reseed_interval, if reseed_interval set before seed
and reseed_interval is less than MBEDTLS_CTR_DRBG_RESEED_INTERVAL.
Signed-off-by: gacquroff <gavina352@gmail.com>
As a result, the copyright of contributors other than Arm is now
acknowledged, and the years of publishing are no longer tracked in the
source files.
Also remove the now-redundant lines declaring that the files are part of
MbedTLS.
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find files
find '(' -path './.git' -o -path './3rdparty' ')' -prune -o -type f -print | xargs sed -bi '
# Replace copyright attribution line
s/Copyright.*Arm.*/Copyright The Mbed TLS Contributors/I
# Remove redundant declaration and the preceding line
$!N
/This file is part of Mbed TLS/Id
P
D
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
In library source files, include "common.h", which takes care of
including "mbedtls/config.h" (or the alternative MBEDTLS_CONFIG_FILE)
and other things that are used throughout the library.
FROM=$'#if !defined(MBEDTLS_CONFIG_FILE)\n#include "mbedtls/config.h"\n#else\n#include MBEDTLS_CONFIG_FILE\n#endif' perl -i -0777 -pe 's~\Q$ENV{FROM}~#include "common.h"~' library/*.c 3rdparty/*/library/*.c scripts/data_files/error.fmt scripts/data_files/version_features.fmt
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The functions mbedtls_ctr_drbg_random() and
mbedtls_ctr_drbg_random_with_add() could return 0 if an AES function
failed. This could only happen with alternative AES
implementations (the built-in implementation of the AES functions
involved never fail), typically due to a failure in a hardware
accelerator.
Bug reported and fix proposed by Johan Uppman Bruce and Christoffer
Lauri, Sectra.
In the CTR_DRBG module, add selftest data for when
MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is enabled.
I generated the test data by running our own code. This is ok because
we have other tests that ensure that the algorithm is implemented
correctly.
This makes programs/self/selftest pass when
MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is enabled.
Change the default entropy nonce length to be nonzero in some cases.
Specifically, the default nonce length is now set in such a way that
the entropy input during the initial seeding always contains enough
entropy to achieve the maximum possible security strength per
NIST SP 800-90A given the key size and entropy length.
If MBEDTLS_CTR_DRBG_ENTROPY_LEN is kept to its default value,
mbedtls_ctr_drbg_seed() now grabs extra entropy for a nonce if
MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is disabled and either
MBEDTLS_ENTROPY_FORCE_SHA256 is enabled or MBEDTLS_SHA512_C is
disabled. If MBEDTLS_CTR_DRBG_USE_128_BIT_KEY is enabled, or if
the entropy module uses SHA-512, then the default value of
MBEDTLS_CTR_DRBG_ENTROPY_LEN does not require a second call to the
entropy function to achieve the maximum security strength.
This choice of default nonce size guarantees NIST compliance with the
maximum security strength while keeping backward compatibility and
performance high: in configurations that do not require grabbing more
entropy, the code will not grab more entropy than before.
Add a new function mbedtls_ctr_drbg_set_nonce_len() which configures
the DRBG instance to call f_entropy a second time during the initial
seeding to grab a nonce.
The default nonce length is 0, so there is no behavior change unless
the user calls the new function.
Add a new function mbedtls_ctr_drbg_set_nonce_len() which configures
the DRBG instance to call f_entropy a second time during the initial
seeding to grab a nonce.
The default nonce length is 0, so there is no behavior change unless
the user calls the new function.
mbedtls_ctr_drbg_seed() always set the entropy length to the default,
so a call to mbedtls_ctr_drbg_set_entropy_len() before seed() had no
effect. Change this to the more intuitive behavior that
set_entropy_len() sets the entropy length and seed() respects that and
only uses the default entropy length if there was no call to
set_entropy_len().
This removes the need for the test-only function
mbedtls_ctr_drbg_seed_entropy_len(). Just call
mbedtls_ctr_drbg_set_entropy_len() followed by
mbedtls_ctr_drbg_seed(), it works now.
Move the definitions of mbedtls_ctr_drbg_seed_entropy_len() and
mbedtls_ctr_drbg_seed() to after they are used. This makes the code
easier to read and to maintain.
Refactor mbedtls_ctr_drbg_update_seed_file and
mbedtls_hmac_drbg_update_seed_file to make the error logic clearer.
The new code does not use fseek, so it works with non-seekable files.
This commit removes all the static occurrencies of the function
mbedtls_zeroize() in each of the individual .c modules. Instead the
function has been moved to utils.h that is included in each of the
modules.
