- mbedtls_ecp_check_pub_priv() because it calls ecp_mul()
- mbedtls_pk_check_pair() because it calls the former
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Commit removes conditional compilation block
which depends on MBEDTLS_SSL_TRUNCATED_HMAC
config option.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes code dependent on
MBEDTLS_SSL_TRUNCATED_HMAC from SSL
client and sever example programs.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
The Mbed TLS code relies heavily on reading certain fields of
mbedtls_ecp_group directly. Make these fields public. Require
that MBEDTLS_ECP_ALT alternative implementations have them.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add two functions mbedtls_dhm_get_len() and mbedtls_dhm_get_bitlen() to
query the length of the modulus in bytes or bits.
Remove the len field: the cost of calling mbedtls_dhm_get_len() each time
it's needed is negligible, and this improves the abstraction of the DHM
module.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Conflicts:
include/mbedtls/ssl.h
include/psa/crypto_struct.h
Conflicts fixed by using the code from development branch
and manually re-applying the MBEDTLS_PRIVATE wrapping.
Remove padding parameters as mbedtls_rsa_init()
cannot return an error code when padding
parameters are invalid.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
mbedtls_rsa_set_padding() now returns the error
code MBEDTLS_ERR_RSA_INVALID_PADDING when
padding parameters are invalid.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This change enables automatic detection and consumption of Mbed TLS
library targets from within other CMake projects. By generating an
`MbedTLSConfig.cmake` file, consuming projects receive a more complete
view of these targets, allowing them to be used as dependencies which
properly inherit the transitive dependencies of the libraries.
This is fairly fragile, as it seems Mbed TLS's libraries do not appear
to properly model their dependencies on other targets, including
third-party dependencies. It is, however, sufficient for building and
linking the compiled Mbed TLS libraries when there are no third-party
dependencies involved. Further work is needed for more complex
use-cases, but this will likely meet the needs of most projects.
Resolves#298. Probably useful for #2857.
Signed-off-by: Chris Kay <chris.kay@arm.com>
ssl_server2 had a check that we never try to use a minor version lower
than 2 with DTLS, but that check is no longer needed, as there's no way
that would happen now that MBEDTLS_SSL_MINOR_VERSION_1 is no longer
public.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This commit removes the API
```
mbedtls_ssl_conf_ciphersuites_for_version()
```
which allows to configure lists of acceptable ciphersuites
for each supported version of SSL/TLS: SSL3, TLS 1.{0,1,2}.
With Mbed TLS 3.0, support for SSL3, TLS 1.0 and TLS 1.1
is dropped. Moreover, upcoming TLS 1.3 support has a different
notion of cipher suite and will require a different API.
This means that it's only for TLS 1.2 that we require
a ciphersuite configuration API, and
```
mbedtls_ssl_conf_ciphersuites()
```
can be used for that. The version-specific ciphersuite
configuration API `mbedtls_ssl_conf_ciphersuites_for_version()`,
in turn, is no longer needed.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
MBEDTLS_ECP_FIXED_POINT_OPTIM aims to speed up ecc multiplication performance.
We compute the comb table in runtime now. It is a costly operation.
This patch add a pre-computed table to initialize well-known curves. It speed up ECDSA signature verify process in runtime by using more ROM size.
Signed-off-by: kXuan <kxuanobj@gmail.com>
This commit makes the API
- mbedtls_ssl_get_output_max_frag_len()
- mbedtls_ssl_get_input_max_frag_len()
- mbedtls_ssl_get__max_frag_len()
for querying the state of the Maximum Fragment Length
extension internal.
Rationale: The value those APIs provide to the user is in
upper bounds for the size of incoming and outgoing records,
which can be used to size application data buffers apporpriately
before passing them to mbedtls_ssl_{read,write}(). However,
there are other factors which influence such upper bounds,
such as the MTU or other extensions (specifically, the
record_size_limit extension which is still to be implemented)
which should be taken into account.
There should be more general APIs for querying the maximum
size of incoming and outgoing records.
For the maximum size of outgoing records, we already have such,
namely mbedtls_ssl_get_max_out_record_payload().
For the maximum size of incoming records, a new API will be
added in a subsequent commit.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Conflicts:
library/version_features.c
programs/test/query_config.c
Files were removed in development branch and modified by current branch.
Conflicts fixes by removing them.
Don't run `make list` to obtain the list of programs in
generate_visualc_files.pl. This doesn't work on Windows when a `make`
command is not available. Instead, read the makefile.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't regenerate configuration-independent files when config.h or
crypto_config.h changes. These files only depend on the set of symbols
present in the headers and not on which symbols are enabled. To avoid
rebuilding the generated files whenever the configuration changes,
don't declare the configuration as a dependency.
In the rare event that a maintainer makes an edit to *config.h that
affects the generated files, they'll have to remove the generated files.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Conflicts:
* configs/config-psa-crypto.h: modified here, removed in development
* tests/suites/test_suite_x509parse.data: all conflicts are in depends_on
lines where development made a change unrelated to MBEDTLS_SHAxxx and our
branch either changed `MBEDTLS_SHA256_C` to `MBEDTLS_SHA224_C` or
`MBEDTLS_SHA512_C:!MBEDTLS_SHA512_NO_SHA384` to ``MBEDTLS_SHA384_C`, with
no change to what the test does. Pick the other branch's dependency
changes then apply our SHA dpeendency change.
Commit removes mode parameter from
mbedtls_rsa_pkcs1_verify and propagates the
change throughout the codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes p_rng from mbedtls_rsa_pkcs1_verify
since p_rng has no relevance following the removal
of f_rng from this function.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes f_rng parameter from
mbedtls_rsa_pkcs1_verify as a prerequisite
to removing the mode parameter. f_rng no
longer has relevance in this function if
mode is removed.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Commit removes the mode parameter from
mbedtls_rsa_pkcs1_sign and progagates the
change to all relevant parts of the codebase.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Run `make generated_files` to generate the automatically generated
C source files and build scripts.
Run `make neat` to remove all automatically generated files, even C
source files and build scripts.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Removal of the mode parameter from
mbedtls_rsa_pkcs1_encrypt function. This change
is propagated throughout the codebase and to
relevant tests.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
The mode parameter has been removed from the
mbedtls_rsa_pkcs1_decrypt function. The change
has been progagated to all function calls,
including in test suite .function files.
Signed-off-by: Thomas Daubney <thomas.daubney@arm.com>
Building the library without entropy sources negates any and all security
provided by the library.
This option was originally requested a relatively long time ago and it
does not provide any tangible benefit for users any more.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Rework SHA224 and SHA283 documentation.
Define MBEDTLS_SHAxxx_C options in alphabetic order.
Fix SHA224 and SHA384 dependencies in test suites.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
The sample program aescrypt2 shows bad practice: hand-rolled CBC
implementation, CBC+HMAC for AEAD, hand-rolled iterated SHA-2 for key
stretching, no algorithm agility. The new sample program pbcrypt does
the same thing, but better. So remove aescrypt2.
Fix#1906
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Although SHA512 is currently required to enable SHA384, this
is expected to change in the future. This commit is an
intermediate step towards fully separating SHA384 and SHA512.
check_config is the only module which enforces that SHA512 is
enabled together with SHA384.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Made a mistake when copy-pasting and put the guard in the wrong place.
Fix that by moving the compile time guard.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
This function was introduced before ssl_test_common_source.c and so the
function is replicated in both ssl_client2.c and ssl_server2.c. Move
the function to ssl_test_common_source.c to avoid duplication.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Remove some accidental newlines that were added previously.
Update some definition guards to make it clearer that
`MBEDTLS_X509_REMOVE_INFO` is defined and not undefined.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
The new compile-time option MBEDTLS_X509_REMOVE_INFO removes various
X.509 debugging strings and functionality, including
```
mbedtls_x509_crt_verify_info()
```
which ssl_client2.c and ssl_server2.c use to print human readable
descriptions of X.509 verification failure conditions. Those
conditions are also grepped for in numerous ssl-opt.sh tests.
Instead of disabling those tests if MBEDTLS_X509_REMOVE_INFO is set,
this commit essentially moves mbedtls_x509_crt_verify_info() to
ssl_client2.c and ssl_server2.c. However, instead of just copy-pasting
the code from x509_crt.c, the following approach is used:
A macro MBEDTLS_X509_CRT_ERROR_INFO_LIST is introduced which for each
verification failure condition invokes a user-defined macro X509_CRT_ERROR_INFO
with (a) the numerical error code, (b) the string presentation of the
corresponding error macro, (c) the info string for the error condition.
This macro can thus be used to generate code which somehow iterates over
the verifiation failure conditions, but the list of error conditions and
information strings is nowhere duplicated.
This is then used to re-implement mbedtls_x509_crt_verify_info() in
x509_crt.c and to provide a functionally equivalent (yet slightly different)
version in ssl_client2.c and ssl_server2.c in case MBEDTLS_X509_REMOVE_INFO
is set.
This way, little changes to ssl-opt.sh will be necessary in case
MBEDTLS_X509_REMOVE_INFO is set because the info strings for the
verification failure conditions will be printed regardless of whether
MBEDTLS_X509_REMOVE_INFO is set or not.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The introduction of positive options to control the presence
of pre-existing functionality breaks the build for users of
handwritten configurations.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Introduce MBEDTLS_X509_INFO to indicate the availability of the
mbedtls_x509_*_info() function and closely related APIs. When this is
not defined, also omit name and description from
mbedtls_oid_descriptor_t, and omit OID arrays, macros, and types that
are entirely unused. This saves several KB of code space.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Signed-off-by: Chris Jones <christopher.jones@arm.com>
According to the design in psa-driver-interface.md. Compiles without
issue in test_psa_crypto_drivers.
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
Call it “SHAKE256-512”, just like SHA3-512 has 512 bits of output.
SHAKE256-64 looks like it's 64 bits of output, but this is 64 bytes.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Define algorithms for PureEdDSA and for HashEdDSA, the EdDSA variants
defined by RFC 8032.
The encoding for HashEdDSA needs to encode the hash algorithm so that
the hash can be calculated by passing PSA_ALG_SIGN_GET_HASH(sig_alg)
to psa_hash_compute() or psa_hash_setup(). As a consequence,
Ed25519ph (using SHA-512) and Ed448ph (using SHAKE256) need to have
different algorithm encodings (the key is enough to tell them apart,
but it is not known while hashing). Another consequence is that the
API needs to recognize the Ed448 prehash (64 bytes of SHAKE256 output)
as a hash algorithm.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add an elliptic curve family for the twisted Edwards curves
Edwards25519 and Edwards448 ("Goldilocks"). As with Montgomery curves,
since these are the only two curves in common use, the family has a
generic name.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
`entropy_poll.h` and `md_wrap.h` were still being used in some of the
example programs. As these headers are now internal, remove their
references and replace them with publicly available functions.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
`entropy_poll.h` is not supposed to be used by application code and
is therefore being made internal.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
`aesni.h` is an internal header and is moved accordingly.
Also removes some references to internal headers in scripts with
only public headers.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Revert changes introduced in 50518f4195
as it is now clear that these headers are internal without the
`*_internal.h` suffix.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Move `include/mbedtls/bn_mul.h` to `library/bn_mul.h`.
Update includes and references to `bn_mul.h` to new location.
Also remove internal headers from `cpp_dummy_build.cpp` as it should only
test public headers in the library.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Simple find and replace using `#include (<|")mbedtls/(.*)_internal.h(>|")`
and `#include $1$2_internal.h$3`.
Also re-generated visualc files by running
`scripts/generate_visualc_files.pl`.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Only move `rsa_internal.h` for now to test dependancies. Other internal
headers will be moved in following commits.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
The PSA subsystem may consume global resources. It currently doesn't
consume any heap when no keys are registered, but it may do so in the
future. It does consume mutexes, which are reported as leaks when
mutex usage checking is enabled.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test hook failure checks may print information to stdout, which messes
up the usage of query_config mode. Nothing interesting happens in
query_config mode anyway, so that's no loss.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Create utility functions to set up test hooks and report errors that
the test hooks might detect. Call them in ssl_client2 and ssl_server2.
Test hooks are potentially enabled by compiling with
MBEDTLS_TEST_HOOKS.
This commit only sets up the functions. It doesn't make them do
anything yet.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Part of build_default_make_gcc_and_cxx compares the list of headers
included by `programs/test/cpp_dummy_build.cpp` and the actual headers
present. Add in the missing `mbedtls/psa_config.h` file to this list so
that this test passes.
Signed-off-by: David Brown <david.brown@linaro.org>
The SSL test programs can now use the PSA RNG, and the PSA RNG can use
an external RNG. The build conditions hadn't been updated and didn't
cover the case when MBEDTLS_TEST_USE_PSA_CRYPTO_RNG is enabled but
MBEDTLS_USE_PSA_CRYPTO is disabled. Fix this.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move the call to destroy the PSK to before freeing the SSL session
data and calling rng_free(), which deinitializes the PSA subsystem.
This particular ordering was chosen to make the ssl_client2 more
similar to ssl_server2. This fixes the client failing on the
psa_destroy_key() call in `ssl-opt.sh -f 'opaque psk on client'`.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The SSL test programs can now use mbedtls_psa_get_random() rather than
entropy+DRBG as a random generator. This happens if
the configuration option MBEDTLS_USE_PSA_CRYPTO is enabled, or if
MBEDTLS_TEST_USE_PSA_CRYPTO_RNG is set at build time.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This brings them in line with PSA Crypto API 1.0.0
PSA_ALG_AEAD_WITH_DEFAULT_TAG_LENGTH -> PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG
PSA_ALG_AEAD_WITH_TAG_LENGTH -> PSA_ALG_AEAD_WITH_SHORTENED_TAG
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
With MBEDTLS_USE_PSA_CRYPTO, some of the randomness for the TLS
connection is generated inside the PSA crypto subsystem, which has no
reproducible mode. Whether there is a nonzero amount of randomness
coming from inside the PSA subsystem rather than from the random
generator set by mbedtls_ssl_conf_rng() depends on the choice of
cipher suite and other connection parameters as well as the level of
support for MBEDTLS_USE_PSA_CRYPTO. Rather than give unreliable
results, conservatively abort with a clear error message.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move the declaration of the functions needed to use the test
implementation of mbedtls_psa_external_get_random() to a new header
file. Before, they were declared in
tests/include/test/psa_crypto_helpers.h, but this header file can't be
included in sample programs because it also includes headers from the
library directory which is not on the include path for sample
programs.
This fixes the build of the sample programs when
MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG and MBEDTLS_USE_PSA_CRYPTO are
enabled.
Move the implementation of the functions to a separate .c file as
well. This isn't strictly necessary, but makes the structure of the
source code easier to understand.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Currently, MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG is tested with a dummy
insecure implementation of mbedtls_psa_external_get_random. This
function needs to be explicitly enabled at runtime. This needs to
happen when the PSA external RNG is used, which currently is the case
in SSL test programs only when MBEDTLS_USE_PSA_CRYPTO is enabled.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Support HMAC_DRBG in ssl_client2 and ssl_server2, in addition to
CTR_DRBG. CTR_DRBG is still used if present, but it's now possible to
run the SSL test programs with CTR_DRBG disabled.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In ssl_client2 and ssl_server2, to generate random data, go through a
level of indirection provided by ssl_test_lib. This way the programs
don't depend on a particular choice of RNG implementation, and only
ssl_test_lib.{h,c} explicitly reference CTR_DRBG.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This commit is deliberately arranged to minimize code changes.
Subsequent commits will clean up the resulting code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In preparation for unifying the common RNG-related code of ssl_client2
and ssl_server2, make it possible to copy-paste that code out of these
programs' main() functions:
* Replaces reads of the non-unifiable structure opt by reads of a
separate variable.
* Replace references to the local variable rng by a pointer.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Group the random generation context (entropy and DRBG) into a struct.
This is in preparation for unifying the common RNG-related code of
ssl_client2 and ssl_server2, then generalizing that code to support
methods other than entropy+CTR_DRBG.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Declaring query_config() belongs with the query_config program, not in
ssl_test_lib.h, so move the declaration to a new header file
query_config.h.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move from ssl_*2.c to ssl_test_lib.c:
* Functions that have exactly identical definitions in the two
programs, and that don't reference the global variable opt which
has a different type in the client and in the server. Also declare
these functions in ssl_test_lib.h.
Move from ssl_*2.c to ssl_test_common_source.c:
* Functions that have exactly identical definitions in the two
programs, but access fields of the global variable opt which
has a different structure type in the client and in the server.
* The array ssl_sig_hashes_for_test, because its type is incomplete.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Adjust whitespace and comments in code of ssl_client2.c and
ssl_server2.c that was almost identical to make these chunks exactly
identical.
Make the common functions non-static.
This is in preparation for moving the common code to ssl_test_lib.c.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move from ssl_*2.c to ssl_test_lib.h:
* Include directives for headers included by both programs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Move from ssl_*2.c to ssl_test_lib.h:
* The inclusion of the config header file (identical).
* The fallback definitions of platform functions (almost identical:
server2 also had snprintf and the order and whitespace was slightly
different).
* The compilation guards checking that required options are
enabled (tweaked to make them common, with MBEDTLS_SSL_{CLI,SRV}_C
separated out).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Create a new source file for code that is shared between ssl_client2.c
and ssl_server2.c, but cannot be compiled separately and instead needs
to be #include'd in each program that uses it.
This is for code that references macros or types that are defined
differently in the two programs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Create a new source file for code that is shared between ssl_client2.c
and ssl_server2.c. This commit only creates the file; subsequent
commits will populate it.
Add it to the official build systems (make, cmake, VS).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
*/Makefile is ignored (because it's created by cmake in in-tree builds).
But fuzz/Makefile is checked into git, so don't ignore it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Build query_config.o then link it, instead of building query_config.c
in each of the four programs that use it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_ssl_conf_dtls_srtp_protection_profiles stores the pointer to the
profiles in the configuration.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
If you pass a curve name to the benchmark program, the ECDH and ECDSA
benchmarks will only run for that particular curve. By default, all
curves are benchmarked.
To simplify the implementation, if you pass multiple curves, only the
last one will be benchmarked.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This algorithm replaces the pre-existing stream cipher algorithms.
The underlying stream cipher is determined by the key type.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
The driver interfaces described in crypto_accel_driver.h and
crypto_entropy_driver.h are no longer being worked on. We do not
intend to finish the design of these interfaces or to implement them
in Mbed TLS. They have been superseded by the unified driver
interface (docs/proposed/psa-driver-interface.md), which is being
actively worked on both to finalize the specification and to implement
it in Mbed TLS.
The partially implemented dynamic secure element interface is staying
for now.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
GCC 11 generated the warnings because the parameter `ret_buf`
was declared as `const char[10]`, but some of the arguments
provided in `run_test_snprintf` are shorter literals, like "".
Now the type of `ret_buf` is `const char *`.
Both implementations of `test_snprintf` were fixed.
Signed-off-by: Rodrigo Dias Correa <rodrigo@correas.us>
If the file is read correctly, but it contains data that isn't valid,
the crypto storage code returns PSA_ERROR_DATA_INVALID.
The PSA_ERROR_DATA_CORRUPT and PSA_ERROR_STORAGE_FAILURE error codes are
replaced with PSA_ERROR_DATA_INVALID, except in the ITS subsystem.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Allow the user to configure PSA to use HMAC_DRBG even if CTR_DRBG is
available, or to explicitly select the hash algorithm to use for
HMAC_DRBG, by setting MBEDTLS_PSA_HMAC_DRBG_MD_TYPE in config.h.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Create a configuration option for autonomous random drivers, i.e. PSA
crypto drivers that provide a random generator, that have their own
entropy source and do not support injecting entropy from another
source.
This commit only creates the configuration option. Subsequent commits
will add the implementation and tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In cmake version < 3.0, the SOURCES property on targets cannot be
modified after the target is defined. There are several instances in
the code that were using `target_properties()`, which is not available
in the older versions of cmake. Unfortunately, the workaround in #3801
(381c1078fc) assumes that this SOURCES property can be modified.
Work around this by building up any necessary sources before declaring
the target. This is more awkward, but needed to continue to be able to
support the old versions of cmake.
Fixes#3788.
Signed-off-by: David Brown <david.brown@linaro.org>
PSA and SSL programs are PSA clients thus should use
psa_key_id_t as the type for key identifiers, not
mbedtls_svc_key_id_t.
As a consequence, PSA, ssl_server2 and ssl_client2
programs cannot compile and must not be compiled if
MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER is defined.
Thus, add MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
compilation guard to those programs.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Define psa_key_handle_t to be equal to
mbedtls_svc_key_id_t. Make the handle of a persistent
key be equal to its key identifier. For volatile keys,
make the key handle equal to the volatile key
identifier of the created volatile key.
The unit tests are modified just to make them compile
not to make them run successfully. They are fixed in
the subsequent commits.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
CMake versions less than 3.0 do not support the `target_sources`
command. In order to be able to support v2.8.12.2 of cmake, directly
set the SOURCES property instead of using the target_sources command.
A future patch could reverse this, if the project decides to forgo
support for cmake versions less than 3.0.
Fixes#3801
Signed-off-by: David Brown <david.brown@linaro.org>
Use the export keys functionality, to call the public API
`mbedtls_ssl_tls_prf()`, and remove the function
`mbedtls_ssl_get_dtls_srtp_key_material()`.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
Fix compilation errors when `MBEDTLS_DTLS_SRTP` not set
1. Add file missed in previous commmit.
2. In sample applications, set `DFL_FORCE_SRTP_PROFILE` to 0.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
1. Set correct mki from the `use_srtp` extension.
2. Use mki value received from the client as the mki used by server.
3. Use `mbedtls_ssl_dtls_srtp_set_mki_value()` as a client API only.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
Add dtls-srtp to `ssl_client2` and `ssl_server2` examples,
for reference and for allowing in tests.
Signed-off-by: Johan Pascal <johan.pascal@belledonne-communications.com>
In `read_next_b64_code()`, the result of fgetc() is stored into a char,
but later compared against EOF, which is generally -1. On platforms
where char is unsigned, this generates a compiler warning/error that the
comparison will never be true (causing a build failure). The value will
never match, with the function ultimately bailing with a "Too many bad
symbols are detected" error.
On platforms with signed char, EOF is detected, but a file containing a
0xFF character will causes a premature end of file exit of the loop.
Fix this by changing the result to an int.
Fixes#3794.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: David Brown <david.brown@linaro.org>
Allows required targets to have prefixes added to them, so that external
projects can avoid target names clashing.
Signed-off-by: Raef Coles <raef.coles@arm.com>
If MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED is defined, then the return value will be overridden by the extra code running after the removed return instruction.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
The extra code running after the removed return instruction should not generate any output. Only the read config value must be printed.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Since the recent changes required the addition of a new definition
in mbedtls/config.h, we also need to update query_config.c to account
for the new MBEDTLS_PSA_CRYPTO_CONFIG setting.
Signed-off-by: John Durkop <john.durkop@fermatsoftware.com>
Python should not be required for the build when the no_test target is
used. This commit adds the generated file to the source tree and the
check-generated-files script, and removes the generation from (c)make.
Fixes#3524
Signed-off-by: Cameron Nemo <cnemo@tutanota.com>
Also adjusted the different makefiles accordingly.
Note: driver lifetime is currently statically defined in the header, but
this will be replaced in the future based on autogeneration of lifetime
values by a script (TBD)
Signed-off-by: Steven Cooreman <steven.cooreman@silabs.com>
With PSA crypto v1.0.0, a volatile key identifier may
contain a owner identifier but no file is associated
to it. Thus rename the type psa_key_file_id_t to
mbedtls_svc_key_id_t to avoid a direct link with a
file when a key identifier involves an owner
identifier.
The new type name is prefixed by mbedtls to highlight
that the type is specific to Mbed TLS implementation
and not defined in the PSA Cryptography API
specification.
The svc in the type name stands for service as this
is the key identifier type from the point of view of
the service providing the Cryptography services.
The service can be completely provided by the present
library or partially in case of a multi-client service.
As a consequence rename as well:
. MBEDTLS_PSA_CRYPTO_KEY_FILE_ID_ENCODES_OWNER to
MBEDTLS_PSA_CRYPTO_KEY_ID_ENCODES_OWNER
. PSA_KEY_ID_INIT to MBEDTLS_SVC_KEY_ID_INIT
. PSA_KEY_FILE_GET_KEY_ID to MBEDTLS_SVC_KEY_ID_GET_KEY_ID
. psa_key_file_id_make to mbedtls_svc_key_id_make
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
I might be wrong, but lcc's optimizer is curious about this,
and I am too: shouldn't we free allocated stuff correctly
before exiting `dh_genprime` in this certain point of code?
Signed-off-by: makise-homura <akemi_homura@kurisa.ch>
Discover hash algorithms automatically rather than hard-coding a list,
as was previously done in cert_write.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
* development:
Update copyright notices to use Linux Foundation guidance
Undef ASSERT before defining it to ensure that no previous definition has sneaked in through included files.
Add ChangeLog entry for X.509 CN-type vulnerability
Improve documentation of cn in x509_crt_verify()
Fix comparison between different name types
Add test: DNS names should not match IP addresses
Remove obsolete buildbot reference in compat.sh
Fix misuse of printf in shell script
Fix added proxy command when IPv6 is used
Simplify test syntax
Fix logic error in setting client port
ssl-opt.sh: include test name in log files
ssl-opt.sh: remove old buildbot-specific condition
ssl-opt.sh: add proxy to all DTLS tests
Signed-off-by: Dan Handley <dan.handley@arm.com>
Currently the new component in all.sh fails because
mbedtls_ssl_cf_memcpy_offset() is not actually constant flow - this is on
purpose to be able to verify that the new test works.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
As a result, the copyright of contributors other than Arm is now
acknowledged, and the years of publishing are no longer tracked in the
source files.
Also remove the now-redundant lines declaring that the files are part of
MbedTLS.
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find files
find '(' -path './.git' -o -path './3rdparty' ')' -prune -o -type f -print | xargs sed -bi '
# Replace copyright attribution line
s/Copyright.*Arm.*/Copyright The Mbed TLS Contributors/I
# Remove redundant declaration and the preceding line
$!N
/This file is part of Mbed TLS/Id
P
D
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
The example application programs/ssl/ssl_client2 allows the
configuration of a client CRT through the parameters
- crt_file, key_file
However, password protected key files are not supported.
This commit adds a new command line option
- key_pwd
which allow to specify a password for the key file specified
in the key_file parameter.
The example application programs/ssl/ssl_server2 allows the
configuration of up to two CRTs through the command line
parameters
- crt_file, key_file
- crt_file2, key_file2.
However, password protected key files are not supported.
This commit adds command line options
- key_pwd
- key_pwd2
which allow to specify passwords for the key files specified
in key_file and key_file2, respectively.
This option allows to test the constant-flow nature of selected code, using
MemSan and the fundamental observation behind ctgrind that the set of
operations allowed on undefined memory by dynamic analysers is the same as the
set of operations allowed on secret data to avoid leaking it to a local
attacker via side channels, namely, any operation except branching and
dereferencing.
(This isn't the full story, as on some CPUs some instructions have variable
execution depending on the inputs, most notably division and on some cores
multiplication. However, testing that no branch or memory access depends on
secret data is already a good start.)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Rename PSA_DH_GROUP_xxx to PSA_DH_FAMILY_xxx, also rename
PSA_KEY_TYPE_GET_GROUP to PSA_KEY_TYPE_DH_GET_FAMILY and rename
psa_dh_group_t to psa_dh_family_t. Old defines are provided in
include/crypto_compat.h for backward compatibility.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Rename PSA_ECC_CURVE_xxx to PSA_ECC_FAMILY_xxx, also rename
PSA_KEY_TYPE_GET_CURVE to PSA_KEY_TYPE_ECC_GET_FAMILY and rename
psa_ecc_curve_t to psa_ecc_family_t. Old defines are provided in
include/crypto_compat.h for backward compatibility.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
This makes the implementation of mbedtls_param_failed()
for testing purpose available to programs. Thus removing
the ad-hoc implementations in programs.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Use list of executables to:
- factorize the code to define executables
- highlight the similarities and differences of the executable definitions
- avoid list duplication
Use alphabetic order for executables in lists.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
The path to source files were relative which triggered
warnings when generating the build system.
Move to absolute paths based on CMAKE_CURRENT_SOURCE_DIR.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Also normalize the first line of the copyright headers.
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find scripts
find -path './.git' -prune -o '(' -name '*.c' -o -name '*.cpp' -o -name '*.fmt' -o -name '*.h' ')' -print | xargs sed -i '
# Normalize the first line of the copyright headers (no text on the first line of a block comment)
/^\/\*.*Copyright.*Arm/I {
i\
/*
s/^\// /
}
/Copyright.*Arm/I {
# Print copyright declaration
p
# Read the two lines immediately following the copyright declaration
N
N
# Insert Apache header if it is missing
/SPDX/! i\
* SPDX-License-Identifier: Apache-2.0\
*\
* Licensed under the Apache License, Version 2.0 (the "License"); you may\
* not use this file except in compliance with the License.\
* You may obtain a copy of the License at\
*\
* http://www.apache.org/licenses/LICENSE-2.0\
*\
* Unless required by applicable law or agreed to in writing, software\
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT\
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\
* See the License for the specific language governing permissions and\
* limitations under the License.
# Clear copyright declaration from buffer
D
}
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
This commit was generated using the following script:
# ========================
#!/bin/sh
# Find scripts
find -path './.git' -prune -o '(' -name '*.gdb' -o -name '*.pl' -o -name '*.py' -o -name '*.sh' ')' -print | xargs sed -i '
# Remove Mbed TLS declaration if it occurs before the copyright line
1,/Copyright.*Arm/I {
/This file is part of/,$ {
/Copyright.*Arm/I! d
}
}
# Convert non-standard header in scripts/abi_check.py to the format used in the other scripts
/"""/,/"""/ {
# Cut copyright declaration
/Copyright.*Arm/I {
h
N
d
}
# Paste copyright declaration
/"""/ {
x
/./ {
s/^/# / # Add #
x # Replace orignal buffer with Copyright declaration
p # Print original buffer, insert newline
i\
s/.*// # Clear original buffer
}
x
}
}
/Copyright.*Arm/I {
# Print copyright declaration
p
# Read the two lines immediately following the copyright declaration
N
N
# Insert Apache header if it is missing
/SPDX/! {
i\
# SPDX-License-Identifier: Apache-2.0\
#\
# Licensed under the Apache License, Version 2.0 (the "License"); you may\
# not use this file except in compliance with the License.\
# You may obtain a copy of the License at\
#\
# http://www.apache.org/licenses/LICENSE-2.0\
#\
# Unless required by applicable law or agreed to in writing, software\
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT\
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\
# See the License for the specific language governing permissions and\
# limitations under the License.
# Insert Mbed TLS declaration if it is missing
/This file is part of/! i\
#\
# This file is part of Mbed TLS (https://tls.mbed.org)
}
# Clear copyright declaration from buffer
D
}
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
1. When `ssl_server2` export key functionality fails,
don't exit the server, but reset it, to have the
server recover for next connection.
2. Add text filters for `export keys functionality` test in ssl-opt.sh
to check for additional output, to verify if the export suceeded.
This was discovered in the `ssl-opt.sh` script, where the server exited,
before the test tried to kill the server priocess, resulting in a
`kill: No such process` message.
Fixes#2662
Signed-off-by: Ron Eldor <Ron.Eldor@arm.com>
Strict platforms cannot be expected to accept C99 code as valid
when earlier standards versions are selected.
This helps the programs build on Solaris-like platforms (e.g.
illumos).
Fixes#3420
Signed-off-by: nia <nia@netbsd.org>
Instead, we insert a comment containing GDB_BREAK_HERE in the line we
want to break at, and let the gdb script search for it.
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
No effect so far, except on dependency checking, as the feature it's meant to
disable isn't implemented yet (so the descriptions in config.h and the
ChangeLog entry are anticipation for now).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Invasive testing strategy
Create a new header `common.h`.
Introduce a configuration option `MBEDTLS_TEST_HOOKS` for test-specific code, to be used in accordance with the invasive testing strategy.
This is to avoid confusion with the class of macros
MBEDTLS_SSL_PROTO_TLS1_X
which have an underscore between major and minor version number.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
While at it, fix a few other obvious ones such as ENTROPY and TIMING_C when
applicable.
A non-regression test for CTR_DRBG will be added in a follow-up commit.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
This commit modifies the generate_psa_constants.py script to take as
input argument the location of where to write the
psa_constant_names_generated.c file.
For make-based build system, this commit does not change anything.
For CMake build system, this commit modifies the generation location of
that file to be inside the build directory and include it from there in
psa_constant_names.c
Fix#3365
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>
Convert all text files to Unix line endings unless they're Windows
stuff.
Make sure that all text files have a trailing newline.
Remove whitespace at the end of lines.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Don't use string literals that are longer than 4095 bytes, which is
the minimum that C99 compilers are required to support. Compilers are
extremely likely to support longer literals, but `gcc -std=c99 -pedantic`
complains.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It works in practice on almost every platform, given that we're only
using the wrong type in cases where the value is guaranteed to stay
within the value bits of a signed int. But even in this case it may or
may not be strictly conforming. Anyway `gcc -std=c99 -pedantic`
rejects it.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
A file generated based on the output of `make list` from programs has been
re-generated.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
Since the server might want to have a different maximum fragment length
for the outgoing messages than the negotiated one - introduce a new way of
computing it. This commit also adds additional ssl-opt.sh tests ensuring
that the maximum fragment lengths are set as expected.
mbedtls_ssl_get_max_frag_len() is now a deprecated function,
being an alias to mbedtls_ssl_get_output_max_frag_len(). The behaviour
of this function is the same as before.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
When building with MBEDTLS_MEMORY_DEBUG enabled, and running the ecdh part,
the benchmark program would start writing a very large number of space
characters on stdout, and would have to be killed because it never seemed to
terminate.
This was due to an integer overflow in computing how many space to leave after
the title in order to get memory measurements aligned, which resulted in up
to SIZE_MAX spaces being printed.
This commit just fixes the overflow, the next commit is going to fix the magic
number (12).
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
The server must check client reachability (we chose to do that by checking a
cookie) before destroying the existing association (RFC 6347 section 4.2.8).
Let's make sure we do, by having a proxy-in-the-middle inject a ClientHello -
the server should notice, but not destroy the connection.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
When this option is enabled, the product includes additional
interfaces that enable additional tests. This option should not be
enabled in production, but is included in the "full" build to enable
the extra tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Merge the latest state of the target branch (mbedtls/development) into the
pull request to merge mbed-crypto into mbedtls.
Conflicts:
* ChangeLog: add/add conflict. Resolve by using the usual section order.
In Windows cmd, `del foo` succeeds if `foo` doesn't exist, but
`del *.ext` fails if `*.ext` doesn't match any files. Therefore we use
the idiom `if exist *.ext del *.ext` to delete files matching
wildcards.
We've accidentally used `if exist $(some_list) del $(some_list)`, and
that's wrong, because it's only syntactically correct if
`$(some_list)` contains exactly one element. As long as `$(some_list)`
contains actual file names and not wildcards, just use `del $(some_list)`.
Rename identifiers containing double-underscore (`__`) to avoid `__`.
The reason to avoid double-underscore is that all identifiers
containing double-underscore are reserved in C++. Rename all such
identifiers that appear in any public header, including ssl_internal.h
which is in principle private but in practice is installed with the
public headers.
This commit makes check-names.sh pass.
```
perl -i -pe 's/\bMBEDTLS_SSL__ECP_RESTARTABLE\b/MBEDTLS_SSL_ECP_RESTARTABLE_ENABLED/g; s/\bMBEDTLS_KEY_EXCHANGE_(_\w+)_(_\w+)\b/MBEDTLS_KEY_EXCHANGE${1}${2}/g' include/mbedtls/*.h library/*.c programs/*/*.c scripts/data_files/rename-1.3-2.0.txt tests/suites/*.function
```
Merge `unremove-non-crypto` into `mbedtls/development`. The branch
`unremove-non-crypto` was obtained by starting from `mbed-crypto/development`,
then reverting many commits that removed X.509 and TLS functionality when Mbed
Crypto forked from Mbed TLS (the “unremoval”), then make a few tweaks to
facilitate the merge.
The unremoval step restored old versions of some tls files. If a file doesn't
exist in mbed-crypto, check out the mbedtls version, regardless of what
happened during the unremoval of tls files in the crypto tree. Also
unconditionally take the mbedtls version of a few files where the
modifications are completely project-specific and are not relevant in
mbed-crypto:
* `.github/issue_template.md`: completely different. We may want to reconcile
them independently as a follow-up.
* `.travis.yml`: would only be reverted to an earlier tls version.
* `README.md`: completely different. We may want to reconcile them
independently as a follow-up.
* `doxygen/input/doc_mainpage.h`: the changes in crypto were minimal and not
relevant except as a stopgap as mbed-crypto did not have its own product
versioning in the Doxygen documentation.
* `tests/.jenkins/Jenkinsfile`: completely different.
* `tests/data_files/Makefile`: there were no changes in mbed-crypto,
but the unremoval step restored an old version.
Shell script for everything to do after the merge apart from the conflict
resolution:
```
tls_files=($(comm -23 <(git ls-tree -r --name-only HEAD) <(git ls-tree -r --name-only $(git merge-base upstream-crypto/development MERGE_HEAD))))
tls_files+=($tls_files .github/issue_template.md .travis.yml README.md doxygen/input/doc_mainpage.h tests/.jenkins/Jenkinsfile tests/data_files/Makefile)
git checkout --theirs HEAD -- $tls_files
git add -- $tls_files
```
Resolve the remaining conflicts:
* `library/CMakeLists.txt`:
* Keep the TLS definition of `src_crypto`
* `USE_SHARED_MBEDTLS_LIBRARY`: keep all three libraries, with both
`include` and `crypto/include` in `target_include_directories`, all with
version `2.21.0`.
* `programs/Makefile`:
* Reconcile the APPS lists (add/add from a differently-formatted common
ancestor): insert the `psa/*` from crypto into the tls list.
* Keep the `fuzz` target defined only in tls version.
* Keep the recipe (only in tls version) cleaning `ssl_pthread_server`
stuff for the `clean` target.
* `scripts/config.py`:
* `include_in_full`: add/add conflict. Keep both.
* `tests/scripts/all.sh`:
* `component_test_no_use_psa_crypto_full_cmake_asan`: partially old
version in crypto. Take the tls version.
* `component_test_malloc_0_null` and more: take
`component_test_malloc_0_null` from crypto (with `config.py` rather than
`config.pl`, and with `$ASAN_FLAGS` rather than an explicit list), but
add the call to `ssl-opt.sh` from tls. Take the other components from
crypto.
With this commit, building and running the unit tests with both `make ` and
`cmake` work in the default configuration on Linux. Other platforms, build
systems and configurations are likely not to work, and there is some
regression in test coverage.
There is some loss of functionality because the unremoval step restored older
versions of tls content. This commit contains the latest tls version of
tls-only files, but some changes from the tls side in files that existed on
both sides have regressed. Most problematic changes are hunks that remove some
tls-specific feature and contain either a C preprocessor symbol identifying a
tls-specific module or option, or the name of a tls-specific file. Hunks
that remove a tls-specific preprocessor symbol can be identified with the
regular expression `^-.*MBEDTLS_(ERR_)?(PKCS11|X509|NET|SSL)_`.
Subsequent commits will revert a few parts of the patch from this merge commit
in order to restore the tls functionality that it removes, ensure that the
test coverage includes what was covered in either branch, and fix test
failures.
Even if other higher-level libraries were added, these programs would
only link with the crypto library, which is the one that contains
platform functions.
This reverts commit bea98b4581.
Conflicts:
* programs/Makefile:
* APPS: the layout of the definition has changed. re-add dh_client
and dh_server appropriately.
Run scripts/generate_visualc_files.pl to account for the added programs.
This reverts commit d832f187f7.
Conflicts:
* CMakeLists.txt:
* USE_PKCS11_HELPER_LIBRARY: there has been a change immediately before
where it was removed. Just re-add what was removed.
* tests/CMakeLists.txt:
* USE_PKCS11_HELPER_LIBRARY: there has been a change immediately before
where it was removed. Just re-add what was removed.
This reverts commit d874a1fd14.
Conflicts:
* CMakeLists.txt:
* ENABLE_ZLIB_SUPPORT: there has been a change immediately after
where it was removed. Just re-add what was removed.
* tests/CMakeLists.txt:
* ENABLE_ZLIB_SUPPORT: there has been a change immediately after
where it was removed. Just re-add what was removed.
This reverts commit 1c66e48670.
Conflicts:
* include/mbedtls/check_config.h:
* MBEDTLS_SSL_PROTO_SSL3: there has been an addition (of
MBEDTLS_SHA512_NO_SHA384) at the place where it was removed. Re-add it
after (alphabetical order).
* MBEDTLS_ENABLE_WEAK_CIPHERSUITES: there has been an addition (of
MBEDTLS_CTR_DRBG_USE_128_BIT_KEY) at the place where it was removed.
Re-add it after (alphabetical order).
* MBEDTLS_SSL_ALL_ALERT_MESSAGES: there has been an addition (of
MBEDTLS_SHA512_SMALLER) at the place where it was removed. Re-add it
after (alphabetical order).
* include/mbedtls/config.h:
* MBEDTLS_ENABLE_WEAK_CIPHERSUITES: there has been an addition (of
MBEDTLS_CTR_DRBG_USE_128_BIT_KEY) at the place where it was removed.
Re-add it after (alphabetical order).
* MBEDTLS_SSL_ALL_ALERT_MESSAGES: there has been an addition (of
MBEDTLS_SHA512_SMALLER) at the place where it was removed. Re-add it
after (alphabetical order).
* library/version_features.c: re-generate by running
scripts/generate_features.pl.
* programs/test/query_config.c: re-generate by running
scripts/generate_query_config.pl.
* scripts/config.pl: this file has been replaced by config.py. Port
the reversed changes to config.py:
* Revert removing three symbols from the list of symbols to
exclude from full.
* Revert removing one symbol (MBEDTLS_NET_C) from the list of symbols
to exclude from baremetal.
* scripts/footprint.sh:
* Re-add the line to unset MBEDTLS_NET_C, but with config.py instead of
config.pl.
* tests/scripts/all.sh:
* component_test_no_platform: re-add the line to unset MBEDTLS_NET_C, but
with config.py instead of config.pl.
* component_build_arm_none_eabi_gcc,
component_build_arm_none_eabi_gcc_no_udbl_division,
component_build_arm_none_eabi_gcc_no_64bit_multiplication,
component_build_armcc: these components now use the baremetal
configuration, so they do not need to turn off MBEDTLS_NET_C explicitly.
This reverts commit bb1f701212.
* include/mbedtls/check_config.h:
* MBEDTLS_X509_RSASSA_PSS_SUPPORT: there has been an addition (of
MBEDTLS_SHA512_NO_SHA384) at the place where it was removed.
Re-add it before MBEDTLS_SHA512_NO_SHA384 to keep it grouped
with MBEDTLS_RSA_C.
Conflicts:
* scripts/config.pl: this file has been replaced by config.py. Port
the reversed changes to config.py:
* Revert removing three symbols from the list of symbols to
exclude from full.
The ssl-opt.sh test cases using session resumption tend to fail occasionally
on the CI due to a race condition in how ssl_server2 and ssl_client2 handle
the reconnection cycle.
The server does the following in order:
- S1 send application data
- S2 send a close_notify alert
- S3 close the client socket
- S4 wait for a "new connection" (actually a new datagram)
- S5 start a handshake
The client does the following in order:
- C1 wait for and read application data from the server
- C2 send a close_notify alert
- C3 close the server socket
- C4 reset session data and re-open a server socket
- C5 start a handshake
If the client has been able to send the close_notify (C2) and if has been
delivered to the server before if closes the client socket (S3), when the
server reaches S4, the datagram that we start the new connection will be the
ClientHello and everything will be fine.
However if S3 wins the race and happens before the close_notify is delivered,
in S4 the close_notify is what will be seen as the first datagram in a new
connection, and then in S5 this will rightfully be rejected as not being a
valid ClientHello and the server will close the connection (and go wait for
another one). The client will then fail to read from the socket and exit
non-zero and the ssl-opt.sh harness will correctly report this as a failure.
In order to avoid this race condition in test using ssl_client2 and
ssl_server2, this commits introduces a new command-line option
skip_close_notify to ssl_client2 and uses it in all ssl-opt.sh tests that use
session resumption with DTLS and ssl_server2.
This works because ssl_server2 knows how many messages it expects in each
direction and in what order, and closes the connection after that rather than
relying on close_notify (which is also why there was a race in the first
place).
Tests that use another server (in practice there are two of them, using
OpenSSL as a server) wouldn't work with skip_close_notify, as the server won't
close the connection until the client sends a close_notify, but for the same
reason they don't need it (there is no race between receiving close_notify and
closing as the former is the cause of the later).
An alternative approach would be to make ssl_server2 keep the connection open
until it receives a close_notify. Unfortunately it creates problems for tests
where we simulate a lossy network, as the close_notify could be lost (and the
client can't retransmit it). We could modify udp_proxy with an option to never
drop alert messages, but when TLS 1.3 comes that would no longer work as the
type of messages will be encrypted.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
On a valid RSA public key, mbedtls_rsa_export should succeed if you
ask for the public fields, but fail if you ask for private fields. The
code was expecting to succeed when asking for private fields, so
failed on every valid RSA public key.
Add a very basic test of calloc to the selftest program. The selftest
program acts in its capacity as a platform compatibility checker rather
than in its capacity as a test of the library.
The main objective is to report whether calloc returns NULL for a size
of 0. Also observe whether a free/alloc sequence returns the address
that was just freed and whether a size overflow is properly detected.
You can't reuse a CTR_DRBG context without free()ing it and
re-init()ing. This generally happened to work, but was never
guaranteed. It could have failed with alternative implementations of
the AES module because mbedtls_ctr_drbg_seed() calls
mbedtls_aes_init() on a context which is already initialized if
mbedtls_ctr_drbg_seed() hasn't been called before, plausibly causing a
memory leak. Calling free() and seed() with no intervening init fails
when MBEDTLS_THREADING_C is enabled and all-bits-zero is not a valid
mutex representation. So add the missing free() and init().
When building with CMake, for sample programs that only use
functionality in libmbedcrypto and libmbedx509, link with
libmbedx509, not with libmbedtls.
cert_app makes a TLS connection, so do link it with libmbedtls.
When building with CMake, for sample programs that only use
functionality in libmbedcrypto (i.e. crypto and platform), link with
libmbedcrypto, not with libmbedtls.
This doesn't change the result, because the linker skips libraries in
which no symbol is used, but it changes the build dependencies, and it
has the advantage of bringing programs/*/CMakeLists.txt closer to the
corresponding files under crypto/.
The programs concerned are crypto sample and test programs, and
programs that only use (potential) platform functions such as
mbedtls_printf. dh_client and dh_server keep linking with mbedtls
because they use functions from the net_sockets module.
As the SSL programs, like ssl_client2 and ssl_server2, are dependent on
SSL and therefore about to be removed, the only consumer of query_config
is the query_compile_time_config test. As such, it makes sense to move
query_config to be next to what uses it.
There is some commented out X.509 certificate writing code present in
rsa_genkey. It looks like it has been commented out since the beginning
of time. Let's remove it, since commented out code is not in good style.
If `context_buf = mbedtls_calloc( 1, buf_len )` failed,
`context_buf_len` was not initialized. Noticed by
`gcc -Os -Werror=maybe-uninitialized`.
This was only a problem in ssl_server2 (a test program), only with
MBEDTLS_SSL_CONTEXT_SERIALIZATION enabled.
Files deleted by us: keep them deleted.
```
git rm $(git status -s | sed -n 's/^DU //p')
```
Individual files with conflicts:
* `README.md`: keep the crypto version.
* `doxygen/input/doc_mainpage.h`: keep the crypto version (with an obsolete Mbed Crypto version number).
* `include/mbedtls/error.h`:
* `ERROR`: similar additions made through parallel commits, with only whitespace differences. Align with the tls version.
* `library/CMakeLists.txt`: keep the crypto version.
* `library/Makefile`: keep the crypto version.
* `scripts/generate_errors.pl`: keep the crypto version (the relevant changes were made through parallel commits).
* `tests/scripts/check-test-cases.py`:
* `Results`: keep the crypto version, which has both the new argument to the constructor (added in crypto only) and the class docstring (added through parallel commits).
* `tests/suites/helpers.function`:
* `ARRAY_LENGTH`, `ASSERT_ALLOC`: additions in the same location. Keep both, in indifferent order.
* `tests/suites/target_test.function`:
* `receive_uint32`: keep the crypto version which has an additional bug fix. The tls changes made in tls are irrelevant after this bug fix.
* `visualc/VS2010/mbedTLS.vcxproj`: run `scripts/generate_visualc_files.pl`.
Review of non-conflicting changes:
* `all.sh`: 1 change.
* zlib test components: don't add them.
* `include/CMakeLists.txt`: 1 change.
* `target_include_directories`: doesn't work as is (different target name). Don't take the change.
* All other non-conflicting changes: take them.
All key types now have an encoding on 32 bits where the bottom 16 bits
are zero. Change to using 16 bits only.
Keep 32 bits for key types in storage, but move the significant
half-word from the top to the bottom.
Likewise, change EC curve and DH group families from 32 bits out of
which the top 8 and bottom 16 bits are zero, to 8 bits only.
Reorder psa_core_key_attributes_t to avoid padding.
* origin/development:
Remove unused test data file
Remove component designed to test MAX_SIGNATURE_SIZE
Use MBEDTLS_PK_SIGNATURE_MAX_SIZE in pkey sample programs
Use MBEDTLS_PK_SIGNATURE_MAX_SIZE in X.509
Update crypto submodule
x509write_csr: Reduce stack usage of mbedtls_x509write_csr_pem()
Fix mbedtls_ssl_check_record usage with ext buf
Shorter version of mbedtls_ssl_send_fatal_handshake_failure
Resolve#2801 - remove repetitive assignment to ssl->in_msg (the first value was never used)
Resolve#2800 - move declaration to avoid unused variable warning in case MBEDTLS_SSL_PROTO_DTLS was undefined
Resolve#2717 - remove erroneous sizeof (the operator was applied to constant integer number)
Fix potential resource leak in sslserver2 example
X.509: Add numerous negative parsing tests for CertificatePolicy ext
X.509: Adapt negative parsing test for no data in CrtPolicy ext
X.509: Move negative tests for CertificatePolicy parsing
X.509: Remove CRT policy parsing test 'bool len missing'
First deal with deleted files.
* Files deleted by us: keep them deleted.
* Files deleted by them, whether modified by us or not: keep our version.
```
git rm $(git status -s | sed -n 's/^DU //p')
git reset -- $(git status -s | sed -n 's/^D //p')
git checkout -- $(git status -s | sed -n 's/^ D //p')
git add -- $(git status -s | sed -n 's/^UD //p')
```
Individual files with conflicts:
* `3rdparty/everest/library/Hacl_Curve25519_joined.c`: spurious conflict because git mistakenly identified this file as a rename. Keep our version.
* `README.md`: conflict due to their change in a paragraph that doesn't exist in our version. Keep our version of this paragraph.
* `docs/architecture/Makefile`: near-identical additions. Adapt the definition of `all_markdown` and include the clean target.
* `doxygen/input/docs_mainpage.h`: conflict in the version number. Keep our version number.
* `include/mbedtls/config.h`: two delete/modify conflicts. Keep the removed chunks out.
* `library/CMakeLists.txt`: discard all their changes as they are not relevant.
* `library/Makefile`:
* Discard the added chunk about the crypto submodule starting with `INCLUDING_FROM_MBEDTLS:=1`.
* delete/modify: keep the removed chunk out.
* library build: This is almost delete/modify. Their changes are mostly not applicable. Do keep the `libmbedcrypto.$(DLEXT): | libmbedcrypto.a` order dependency.
* `.c.o`: `-o` was added on both sides but in a different place. Change to their place.
* `library/error.c`: to be regenerated.
* `library/version_features.c`: to be regenerated.
* `programs/Makefile`: Most of the changes are not relevant. The one relevant change is in the `clean` target for Windows; adapt it by removing `/S` from our version.
* `programs/test/query_config.c`: to be regenerated.
* `scripts/config.py`: added in parallel on both sides. Keep our version.
* `scripts/footprint.sh`: parallel changes. Keep our version.
* `scripts/generate_visualc_files.pl`: one delete/modify conflict. Keep the removed chunks out.
* `tests/Makefile`: discard all of their changes.
* `tests/scripts/all.sh`:
* `pre_initialize_variables` add `append_outcome`: add it.
* `pre_initialize_variables` add `ASAN_CFLAGS`: already there, keep our version.
* `pre_parse_command_line` add `--no-append-outcome`: add it.
* `pre_parse_command_line` add `--outcome-file`: add it.
* `pre_print_configuration`: add `MBEDTLS_TEST_OUTCOME_FILE`.
* Several changes in SSL-specific components: keep our version without them.
* Several changes where `config.pl` was changed to `config.py` and there was an adjacent difference: keep our version.
* Changes regarding the inclusion of `MBEDTLS_MEMORY_xxx`: ignore them here, they will be normalized in a subsequent commit.
* `component_test_full_cmake_gcc_asan`: add it without the TLS tests.
* `component_test_no_use_psa_crypto_full_cmake_asan`: keep the fixed `msg`, discard other changes.
* `component_test_memory_buffer_allocator_backtrace`, `component_test_memory_buffer_allocator`: add them without the TLS tests.
* `component_test_m32_everest`: added in parallel on both sides. Keep our version.
* `tests/scripts/check-names.sh`, `tests/scripts/list-enum-consts.pl`, `tests/scripts/list-identifiers.sh`, ``tests/scripts/list-macros.sh`: discard all of their changes.
* `tests/scripts/test-ref-configs.pl`: the change in the conflict is not relevant, so keep our version there.
* `visualc/VS2010/*.vcxproj`: to be regenerated.
Regenerate files:
```
scripts/generate_visualc_files.pl
git add visualc/VS2010/*.vcxproj
scripts/generate_errors.pl
git add library/error.c
scripts/generate_features.pl
git add library/version_features.c
scripts/generate_query_config.pl
git add programs/test/query_config.c
```
Rejected changes in non-conflicting files:
* `CMakeLists.txt`: discard their addition which has already been side-ported.
* `doxygen/mbedtls.doxyfile`: keep the version number change. Discard the changes related to `../crypto` paths.
Keep the following changes after examination:
* `.travis.yml`: all of their changes are relevant.
* `include/mbedtls/error.h`: do keep their changes. Even though Crypto doesn't use TLS errors, it must not encroach on TLS's allocated numbers.
* `tests/scripts/check-test-cases.py`: keep the code dealing with `ssl-opt.sh`. It works correctly when the file is not present.
You can't reuse a CTR_DRBG context without free()ing it and
re-init()ing. This generally happened to work, but was never
guaranteed. It could have failed with alternative implementations of
the AES module because mbedtls_ctr_drbg_seed() calls
mbedtls_aes_init() on a context which is already initialized if
mbedtls_ctr_drbg_seed() hasn't been called before, plausibly causing a
memory leak. Calling free() and seed() with no intervening init fails
when MBEDTLS_THREADING_C is enabled and all-bits-zero is not a valid
mutex representation. So add the missing free() and init().
* origin/pr/2765: (28 commits)
Add set+get tests
Consolidate tests for set with/without values
config.py testing: also test the get command
Compatibility redirect: add copyright notice
Compatibility redirect: if python3 is not available, try python
Fix config.py output when a symbol has acquired or lost a value
Remove redundant test case
cmake: update interpreter requirement for the test suite generator
cmake: fix Python requirement
Test script for config.py
Documentation improvements
Fix "#define ... not found" error when using the default file name
Fix "--force set" without a value sneaking a None in
Fix --force requiring an argument
Fix Config.unset() making the name known
Also search config.h near the script
Report an error if switching to Python fails
Fix 'config.py set' without --force
Fix encoding errors
Print help when invoked with no arguments
...
Add a very basic test of calloc to the selftest program. The selftest
program acts in its capacity as a platform compatibility checker rather
than in its capacity as a test of the library.
The main objective is to report whether calloc returns NULL for a size
of 0. Also observe whether a free/alloc sequence returns the address
that was just freed and whether a size overflow is properly detected.
git grep -Fl /config.pl | xargs sed -i -e 's!/config\.pl!/config.py!g'
Also:
* Change one comment in include/mbedtls/check_config.h.
* Change PERL to PYTHON in CMakeLists.txt.
Make client_random and server_random const in
mbedtls_ssl_export_keys_ext_t, so that the key exporter is discouraged
from modifying the client/server hello.
Update examples and tests use const for hello.random as well, to ensure
that the export callbacks are of the proper type.
Fixes#2759
This commit adds command line options
- nss_keylog=0/1
- nss_keylog_file=FILENAME
to the example programs ssl/ssl_client2 and ssl/ssl_server2 which
allow to print and export the session keys in the NSS keylog
for debugging purposes.
* origin/development:
Fix uninitialized variable in x509_crt
Add a ChangeLog entry for mbedtls_net_close()
Added mbedtls_net_close and use it in ssl_fork_server to correctly disassociate the client socket from the parent process and the server socket from the child process.
Add ChangeLog entry
fix memory leak in mpi_miller_rabin()
* origin/pr/2803:
Add a ChangeLog entry for mbedtls_net_close()
Added mbedtls_net_close and use it in ssl_fork_server to correctly disassociate the client socket from the parent process and the server socket from the child process.
* origin/development: (42 commits)
Handle deleting non-existant files on Windows
Update submodule
Use 3rdparty headers from the submodule
Add Everest components to all.sh
3rdparty: Add config checks for Everest
Fix macros in benchmark.c
Update generated files
3rdparty: Fix inclusion order of CMakeLists.txt
Fix trailing whitespace
ECDH: Fix inclusion of platform.h for proper use of MBEDTLS_ERR_PLATFORM_FEATURE_UNSUPPORTED
ECDH: Fix use of ECDH API in full handshake benchmark
ECDH: Removed unnecessary calls to mbedtls_ecp_group_load in ECDH benchmark
ECDH: Fix Everest x25519 make_public
Fix file permissions
3rdparty: Rename THIRDPARTY_OBJECTS
3rdparty: Update description of MBEDTLS_ECDH_VARIANT_EVEREST_ENABLED
3rdparty: Fix Makefile coding conventions
ECDSA: Refactor return value checks for mbedtls_ecdsa_can_do
Add a changelog entry for Everest ECDH (X25519)
Document that curve lists can include partially-supported curves
...
If we try to delete a non-existant file using del on Windows, as
can happen when running make clean, del will throw an error. Make
the Makefiles more robust by only deleting files if they exist.
* origin/development: (114 commits)
Don't redefine calloc and free
Add changelog entry to record checking
Fix compiler warning
Add debug messages
Remove duplicate entries from ChangeLog
Fix parameter name in doxygen
Add missing guards for mac usage
Improve reability and debugability of large if
Fix a typo in a comment
Fix MSVC warning
Fix compile error in reduced configurations
Avoid duplication of session format header
Implement config-checking header to context s11n
Provide serialisation API only if it's enabled
Fix compiler warning: comparing signed to unsigned
Actually reset the context on save as advertised
Re-use buffer allocated by handshake_init()
Enable serialisation tests in ssl-opt.sh
Change requirements for setting timer callback
Add setting of forced fields when deserializing
...
The code wants timer callbacks to be set (checked in fetch_input()), and can't
easily check whether we're using nbio, so it seems easier to require the
callbacks to be always set rather than only with nbio as was previously done.
context_buf was never free()d. Moreover, since we want to free it on error
paths as well, and even properly zeroize it in order to demonstrate good
memory hygiene, we need to make it and its length main()-scoped.
Previously it was missing reset in case 1, and in case 2 the code was never
executed as the option value was reset to 0.
Tighten checking of return values of save(NULL, 0) now that it works.
Also, improve the printed output as well as the comments.
I checked manually that everything now works and fail in the expected way:
save, reset-or-reinit and load all succeed, but the subsequent read or write
fails.
This is enabled by default as we generally enable things by default unless
there's a reason not to (experimental, deprecated, security risk).
We need a compile-time option because, even though the functions themselves
can be easily garbage-collected by the linker, implementing them will require
saving 64 bytes of Client/ServerHello.random values after the handshake, that
would otherwise not be needed, and people who don't need this feature
shouldn't have to pay the price of increased RAM usage.
We have explicit recommendations to use US spelling for technical writing, so
let's apply this to code as well for uniformity. (My fingers tend to prefer UK
spelling, so this needs to be fixed in many places.)
sed -i 's/\([Ss]eriali\)s/\1z/g' **/*.[ch] **/*.function **/*.data ChangeLog
This allows callers to discover what an appropriate size is. Otherwise they'd
have to either try repeatedly, or allocate an overly large buffer (or some
combination of those).
Adapt documentation an example usage in ssl_client2.
Avoid useless copy with mbedtls_ssl_get_session() before serialising.
Used in ssl_client2 for testing and demonstrating usage, but unfortunately
that means mbedtls_ssl_get_session() is no longer tested, which will be fixed
in the next commit.
This provides basic testing for the session (de)serialisation functions, as
well as an example of how to use them.
Tested locally with tests/ssl-opt.sh -f '^Session resume'.
* origin/development: (51 commits)
Fix possibly-lossy conversion warning from MSVC
Reintroduce length 0 check for records
Don't use memcpy() for 2-byte copy operation
Remove integer parsing macro
Fix alignment in record header parsing routine
Don't disallow 'record from another epoch' log msg in proxy ref test
Make sure 'record from another epoch' is displayed for next epoch
Implement record checking API
Mark ssl_parse_record_header() as `const` in SSL context
Make mbedtls_ssl_in_hdr_len() CID-unaware
Remove duplicate setting of ssl->in_msgtype and ssl->in_msglen
Move update of in_xxx fields in ssl_get_next_record()
Move update of in_xxx fields outside of ssl_prepare_record_content()
Reduce dependency of ssl_prepare_record_content() on in_xxx fields
Move ssl_update_in_pointers() to after record hdr parsing
Mark DTLS replay check as `const` on the SSL context
Move updating the internal rec ptrs to outside of rec hdr parsing
Mark ssl_decrypt_buf() as `const in the input SSL context
Adapt ssl_prepare_record_content() to use SSL record structure
Use record length from record structure when fetching content in TLS
...
* origin/pr/2781:
Documentation fixes according to review
Remove unused label in ssl_client2/ssl_server2
Add missing word in documentation of mbedtls_ssl_check_record()
cli/srv ex: Add dbg msg if record checking gives inconsistent result
Fix minor issues in documentation of mbedtls_ssl_check_record()
State that record checking is DTLS only and doesn't check content type
Update version_features.c
Pass dgrams to mbedtls_ssl_check_record in ssl_client2/server2
Add IO wrappers to ssl_server2 as interm's between NET and SSL layer
Add IO wrappers to ssl_client2 as interm's between NET and SSL layer
Introduce configuration option and API for SSL record checking
* development:
Rename local variables
Update submodule
Update Visual studio project file
Move the examples to PSA 1.0
Use psa_raw_key_agreement
Remove calls to psa_allocate_key
Make variable naming consistent
Update psa_create_key to PSA 1.0
Update psa_import_key to PSA 1.0
Update psa_generator_abort to PSA 1.0
Update psa_generator_read to PSA 1.0
Update psa_crypto_generator_t to PSA 1.0
Update psa_key_agreement to PSA 1.0
Update GENERATOR_INIT macro to PSA 1.0
Update KEYPAIR macros to PSA 1.0
All the core examples have been modified not to return from main
by the means of the return statement, but rather via exit() function,
which was done to make the examples more bare metal friendly.
This commit, for the sake of consistency, introduces the modifications
to the test and utility examples. These, while less likely to be used
in the low level environments, won't suffer from such a change.
This is done to account for platforms, for which we want custom behavior
upon the program termination, hence we call `mbedtls_exit()` instead of
returning from `main()`.
