Legacy Bignum is excluded as it doesn't get regular extensions like new
ones.
Each slot uses comments of their respective filetype. Since .data files
don't have a syntax for comments, dummy test cases are used. (These test
cases will never be executed and no noise will be added to tests.)
Signed-off-by: Janos Follath <janos.follath@arm.com>
I ran into a sequence where the assertion `stats[8] > 0` failed for the
range 1..272 with 100 iterations.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Turn mpi_fill_random_internal() into mbedtls_mpi_core_fill_random(). It
had basically the right code except for how X is passed to the function.
Write unit tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
* component_test_tls13_with_padding: just explicitly sets some options that
are identical with full.
* component_test_tls13_with_ecp_restartable: redundant since TLS 1.3 doesn't
have any support for restartable ECC.
* component_test_tls13_with_everest: not useful since TLS 1.3 doesn't call
ECDH directly, it just relies on the PSA abstraction.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
component_build_psa_accel_alg_ecdsa is subsumed by
component_test_psa_crypto_config_accel_ecdsa, which has the same
configuration and additionally runs the unit tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
MBEDTLS_TEST_HOOKS is not supposed to change the behavior of the library, so
it's generally good to have it on in functional tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This patch updates the tests `mpi_mod_raw_cond_swap()` &
`mpi_mod_raw_cond_assign()` to use a non-zero modulus
when invoking `mbedtls_mpi_mod_modulus_setup()`
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch addresses more review comments, and fixes
a circular depedency in the `mbedtls_mpi_mod_modulus_setup()`.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch addresses review comments with regards to style of
`mbedtls_mpi_mod_modulus_setup/free()`.
It also removes a test check which was triggering a use-after-free.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch updates the `mpi_mod_setup()` test suite
to check for incosistencies in the montgomery constant
data's lifecycle.
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
Also remove compat tests from reference component as results from this run are not included in outcome file.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
Use a dictionary to specify optional parameters for each task.
If the task is not specified then all tasks are executed.
Signed-off-by: Przemek Stekiel <przemyslaw.stekiel@mobica.com>
curves.pl, depends-hashes.pl, key-exchanges.pl and depends-pkalgs.pl are now superseded by depends.py.
Update all references to them accordingly.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
It's not needed as a feature. It gets reenabled automatically in
build_info.h like pk_write and pk_parse, but that's an implementation
detail.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In the PSK exchange modes extension declare first
PSK ephemeral if we support both PSK ephemeral
and PSK. This is aligned with our implementation
giving precedence to PSK ephemeral over pure PSK
and improve compatibility with GnuTLS.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
This patch moves the following tests to test_suite_bignum_core:
* `mbedtls_mpi_core_get_mont_r2_unsafe_neg()`
* `mbedtls_mpi_core_get_mont_r2_unsafe()`
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
This patch adds the test for the method calculating the RR. The input/expected
data are generated manually using the following Python3 snippet:
~~~~~
import math
title="mpi_get_montgomery_constant_unsafe"
tt = title + " #{}"
in_data = [ "0f", ... ]
def limb_no(number, bil=64):
return int(math.ceil(int.bit_length(number)/(bil * 1.0)))
def calc_rr(number, bil=64 ):
return '{:x}'.format(pow(pow(2, limb_no(number, bil) * bil), 2, number))
def calc_rr_str(number, prefix=""):
rr64 = calc_rr(number)
rr32 = calc_rr(number, bil=32)
return '{}:"{:x}":"{}":"{}"'.format(prefix,number, rr32, rr64)
print("\n\n".join(["{}\n{}".format(tt.format(in_data.index(v)+1), calc_rr_str(int(v,base=16), title)) for v in in_data]))
~~~~~
Signed-off-by: Minos Galanakis <minos.galanakis@arm.com>
Simplify TLS 1.3 dependencies taking into
account that
MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
implies that MBEDTLS_SSL_PROTO_TLS1_3 is
defined.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Remove requires_key_exchange_with_cert_in_tls12_enabled
and use `requires_any_configs_enabled` directly instead.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Introduce and use
MBEDTLS_SSL_HANDSHAKE_WITH_PSK_ENABLED to
guard TLS code (both 1.2 and 1.3) specific
to handshakes involving PSKs.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Introduce and use
MBEDTLS_SSL_HANDSHAKE_WITH_CERT_ENABLED to
guard TLS code (both TLS 1.2 and 1.3) specific
to handshakes involving certificates.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Use MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_SOME_PSK_ENABLED
instead of MBEDTLS_KEY_EXCHANGE_SOME_PSK_ENABLED to guard
code specific to one of the TLS 1.3 key exchange mode with
PSK.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Use MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_EPHEMERAL_ENABLED
instead of MBEDTLS_KEY_EXCHANGE_WITH_CERT_ENABLED to guard
code specific to the TLS 1.3 ephemeral key exchange mode.
Use it also for the dependencies of TLS 1.3 only tests
relying on ephemeral key exchange mode, but for
tests in tls13-kex-modes.sh where the change is done
later using all
MBEDTLS_SSL_TLS1_3_KEY_EXCHANGE_MODE_.*ENABLED macros.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Add TLS 1.3 specific configuration options
to enable/disable the support for TLS 1.3
key exchange modes.
These configurations are introduced to
move away from the aforementioned
enablement/disablement based on
MBEDTLS_KEY_EXCHANGE_xxx_ENABLED options
that relate to group of TLS 1.2
ciphersuites.
Signed-off-by: Ronald Cron <ronald.cron@arm.com>
Although our build scripts support that, it's annoying, because it makes
"test_suite_XXX" ambiguous between "all the data for
test_suite_XXX.function" and "just test_suite_XXX.data".
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
It just got renamed, and it's also not the most canonical example since it's
a somewhat deprecated interface. Make a different module the example.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Align the name of the bignum test suite with the source module (which was
renamed from mpi.c to bignum.c in the PolarSSL 1.x days). This also brings
it into line with the test suites for the low-level bignum interfaces.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Many bignum tests have multiple calculated result values, so return
these as a list, rather than formatting as a string.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
Separate file is added for classes used to generate cases for tests
in bignum_core.function. Common elements of the BignumOperation class
are added to classes in a new common file, for use across files.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
Test cases for mpi_core_add_if, mpi_core_mla, mpi_core_sub,
mpi_core_montmul are not copied into new files, these are generated in
subsequent commits.
Signed-off-by: Werner Lewis <werner.lewis@arm.com>
ASSERT_ALLOC calculates the size itself, and the parameter indicates number of elements.
```
mbedtls_calloc( sizeof( *( pointer ) ), ( length ) );
```
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
When building SHA512 without SHA384,
there are some code paths that resulted
in unused variables or usage of undefined code.
This commit fixes that.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
The test coverage reduction introduced in
dc25cee lowered the coverage of hash tests
due to intertwining dependencies.
This commit introduces a new class for building
a domain using both the complementary
and exclusive classes.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Disable exclusive jobs that run with a single
config disabled. A lot more bugs should be found by running jobs with only one config
of a family enabled.
This will also lessen the burden on the CI.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Remove old and add new dependencies.
Introduce a way to handle non-trivial problems
stemming from exclusive group testing.
Exclude SHA256 and SHA512, as these are tested
in SHA224 and SHA384 jobs, respectively.
Change config.h to mbedtls_config.h).
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Most of the tests (including those using endpoint_init functions) parse
certificates that require MBEDTLS_SHA256_C to be present.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Add a domain for cipher base algorithms (block permutations and stream
ciphers), a domain for block cipher chaining modes and a domain for
block cipher padding modes.
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
Start each job from the full config minus some memory management
settings and the job-specific settings.
The original content of config.h no longer influences the
configurations used for the jobs (but it still influences what jobs
may run, in that the set of jobs is partly built by parsing #define
and //#define lines in config.h).
Signed-off-by: Andrzej Kurek <andrzej.kurek@arm.com>
