exchange groups of the byte reading macros with MBEDTLS_PUT_UINTxyz
and then shift the pointer afterwards. Easier to read as you can
see how big the data is that you are putting in, and in the case of
UINT32 AND UINT64 it saves some vertical space.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Move common encrypt / decrypt code into common function, and roll in
previously refactored setup checks function, as this is now the only
place it is called.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
minor changes, such as improving the documentation for the byte reading
macros, and using MBEDTLS_PUT_UINT16_xy in place of byte reading
macro combinations
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Replace the contents of MBEDTLS_PUT_UINTx_yz contained inconsitent
but similar/duplicate code to the MBEDTLS_BYTE_x macros. Therefore
the contents of the macros now utilise the byte reading macros.
MBEDTLS_PUT_UINT64_LE's written order was also not consitent with
the other PUT macros, so that was modified.
Documentation comment said LSB instead of MSB and that has also been
resolved.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
byte shifting opertations throughout library/ were only replaced with
the byte reading macros when an 0xff mask was being used.
The byte reading macros are now more widley used, however they have not
been used in all cases of a byte shift operation, as it detracted from
the immediate readability or otherwise did not seem appropriate.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Copy over the GET/PUT_UINT64_LE/BE macros from aes.c and sha512.c
Add the MBEDTLS_ prefix to all 4 macros.
Modify the GET_UINT64 macros to no longer take a target variable
as a parameter, so when the macro function is called it must be
assigned to a variable in the same statement.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
The CHAR macros casted to an unsigned char which in this project
is garunteed to be 8 bits - the same as uint8_t (which BYTE casts
to) therefore, instances of CHAR have been swapped with BYTE and
the number of macros have been cut down
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
aria.c has a shift by 3 bytes, but does not use the 0xff masking.
aparently this is not a problem and it is tidier to use the maco.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Imrpoved the descriptions of the macros and parameters and
changing the name of the MBEDTLS_PUT_UINT... macro parameters
to be more descriptive
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
These cast to an unsigned char rather than a uint8_t
like with MBEDTLS_BYTE_x
These save alot of space and will improve maintence by
replacing the appropriate code with MBEDTLS_CHAR_x
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
The GET macros used to write to a macro parameter, but now
they can be used to assign a value to the desired variable
rather than pass it in as an argument and have it modified
in the macro function.
Due to this MBEDTLS_BYTES_TO_U32_LE is the same as
MBEDTLS_GET_UINT32_LE and was there for replaced in the
appropriate files and removed from common.h
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Added documenttion comments to common.h and removed the changelog
as it is not really necessary for refactoring.
Also modified a comment in aria.c to be clearer
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
Although these only appear in one file: psa_crypto_storage.c
it is tidy to give it the same prefix as the UINT32 macros
and to store them in the fame file
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
As per tests/scripts/check-names.sh, macros in
library/ header files should be prefixed with
MBEDTLS_
The macro functions in common.h where also indented
to comply with the same test
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
The use of the BYTE_x macro in nist_kw did not seem appropriate
in hind sight as it is working with a character array not an int
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
missed do-while around function-like macros (UINT32_BE and
UINT_LE macros) originally present in the indivdual files,
before being moved to common.h.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
32-bit integer manipulation macros (little edian):
GET_UINT32_LE and PUT_UINT32_LE appear in several
files in library/.
Removes duplicate code and save vertical
space the macro has been moved to common.h.
Improves maintainability.
Also provided brief comment in common.h for
BYTES_TO_U32_LE. comment/documentation will
probably need to be edited further for all
recent additions to library/common.h
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
32-bit integer manipulation macros (big edian):
GET_UINT32_BE and PUT_UINT32_BE appear in several
files in library/.
Removes duplicate code and save vertical
space the macro has been moved to common.h.
Improves maintainability.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
The macro BYTES_TO_U32_LE appears in poly1305.c and
chacha20.c.
Removes duplicate code and save vertical
space the macro has been moved to common.h.
Improves maintainability.
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
To improve readability by saving horizontal and vertical space.
Removed unecessary & 0xFF.
Byte reading macros implemented in library/common.h, All files
containing "& 0xff" were modified.
Comments/Documentation not yet added to the macro definitions.
Fixes#4274
Signed-off-by: Joe Subbiani <joe.subbiani@arm.com>
To keep consistent with ssl_{clien2t,server2}.
Change-Id: I08dbe47a3d9b778ba3acad283f608fef4e63c626
CustomizedGitHooks: yes
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
The psa_open_key API depends on MBEDTLS_PSA_CRYPTO_STORAGE_C.
This is unnecessary for builtin keys and so is fixed.
Updated an open_fail test vector keeping with the same.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Add the missing nonce length checks (this function is being used by
oneshot functions as well as multipart, and thus all cipher suites are
being used) and cover the case where a NULL buffer gets passed in.
Extended the set nonce test to cover this.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Remove error clearing from ccm_starts() and ccm_set_lengths().
Add error check in ccm_update_ad(), ccm_update() and ccm_finish().
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Move logic to ccm_starts, ccm_set_lengths, ccm_update_ad,
ccm_update and ccm_finish
Use separate variable to track context state.
Encode first block only if both mbedtls_ccm_starts() and
mbedtls_ccm_set_lengths() were called.
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Base on version config, `handshack_{clinet,server}_step`
will call different step function. TLS1.3 features will
be gradully added base on it.
And a new test cases is added to make sure it reports
`feature is not available`.
Change-Id: I4f0e36cb610f5aa59f97910fb8204bfbf2825949
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
Check configuration parameter in structure setup
function to make sure the config data is available
and valid.
Current implementation checks the version config.
Available version configs are
- tls1_3 only
- tls1_2 only
issues: #4844
Change-Id: Ia762bd3d817440ae130b45f19b80a2868afae924
Signed-off-by: Jerry Yu <jerry.h.yu@arm.com>
The helper `mbedtls_ssl_write_handshake_msg` writes a handshake message
and updates the handshake transcript.
With TLS 1.3, we need finer control over the checksum: updating
at message granularity is not sufficient. To allow for manual maintenance
of the checksum in those cases, refine `mbedtls_ssl_write_handshake_msg()`
into `mbedtls_ssl_write_handshake_msg_ext()` which takes a parameter
determining whether the checksum should be updated.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
- Improves readability
- Will be useful when we introduce MPS as an alternative msg layer.
- Will be useful when we need to reset the messaging layer upon
receipt of a HelloRetryRequest in TLS 1.3.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
The AEAD additional data (AAD) is computed differently in TLS 1.3
compared to TLS 1.2, but this change hasn't yet been reflected in
the codee, rendering the current implementation of
```
mbedtls_ssl_{encrypt,decrypt}_buf()
```
not standard compliant.
This commit fixes this by adjusting the AAD extraction function
ssl_extract_add_data_from_record() and its call-sites.
Please see the documentation of the code for an explanation
of how the AAD has changed from TLS 1.2 to TLS 1.3.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
This commit adds the TLS 1.3 specific internal function
```
mbedtls_ssl_tls13_populate_transform()
```
which creates an instance of the SSL transform structure
`mbedtls_ssl_transform` representing a TLS 1.3 record protection
mechanism.
It is analogous to the existing internal helper function
```
ssl_tls12_populate_transform()
```
which creates transform structures representing record
protection mechanisms in TLS 1.2 and earlier.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
In TLS 1.2 specific code, the internal helper functions
ssl_populate_transform() builds an SSL transform structure,
representing a specific record protection mechanism.
In preparation for a subsequent commit which will introduce
a similar helper function specific to TLS 1.3, this commmit
renames ssl_populate_transform() to ssl_tls12_populate_transform().
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Instances of `mbedtls_ssl_session` represent data enabling session resumption.
With the introduction of TLS 1.3, the format of this data changes. We therefore
need TLS-version field as part of `mbedtlsl_ssl_session` which allows distinguish
1.2 and 1.3 sessions.
This commit introduces such a TLS-version field to mbedtls_ssl_session.
The change has a few ramifications:
- Session serialization/deserialization routines need to be adjusted.
This is achieved by adding the TLS-version after the header of
Mbed TLS version+config, and by having the subsequent structure
of the serialized data depend on the value of this field.
The details are described in terms of the RFC 8446 presentation language.
The 1.2 session (de)serialization are moved into static helper functions,
while the top-level session (de)serialization only parses the Mbed TLS
version+config header and the TLS-version field, and dispatches according
to the found version.
This way, it will be easy to add support for TLS 1.3 sessions in the future.
- Tests for session serialization need to be adjusted
- Once we add support for TLS 1.3, with runtime negotiation of 1.2 vs. 1.3,
we will need to have some logic comparing the TLS version of the proposed session
to the negotiated TLS version. For now, however, we only support TLS 1.2,
and no such logic is needed. Instead, we just store the TLS version in the
session structure at the same point when we populate mbedtls_ssl_context.minor_ver.
The change introduces some overlap between `mbedtls_ssl_session.minor_ver` and
`mbedtls_ssl_context.minor_ver`, which should be studied and potentially resolved.
However, with both fields being private and explicitly marked so, this can happen
in a later change.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Previous code checked that the buffer was big enough for the tag size
for the given algorithm, however chachapoly finish expects a 16 byte
buffer passed in, no matter what. If we start supporting smaller
chachapoly tags in the future, this could potentially end up in buffer
overflow, so add a safety check.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
The internal verify endpoint was only calling the finish endpoint to get
a tag to compare against the tag passed in. Moved this logic to the
driver wrapper (still allowing a driver to call verify if required) and
removed the internal implementation endpoint.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
We already did this on failure, but make sure the buffer does not leak
what was in it previously on success
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
mbedtls_ecp_read_key and mbedtls_ecp_write_key are updated to include
support for Curve448 as prescribed by RFC 7748 §5.
Test suites have been updated to validate curve448 under Montgomery
curves.
Signed-off-by: Archana <archana.madhavan@silabs.com>
Remove a check in rsa_rsassa_pkcs1_v15_encode() that
is not needed because the same check is performed
earlier. This check was added in #4707.
Signed-off-by: David Horstmann <david.horstmann@arm.com>
Fix initialization of mbedtls_psa_cipher_operation_t by not initializing the mbedtls_cipher_context_t typed field completely.
Signed-off-by: gabor-mezei-arm <gabor.mezei@arm.com>
Introduce new codes:
* MBEDTLS_ERR_SSL_UNSUPPORTED_EXTENSION
* MBEDTLS_ERR_SSL_NO_APPLICATION_PROTOCOL
These are returned when the corresponding alert is raised.
Signed-off-by: Dave Rodgman <dave.rodgman@arm.com>
New name MBEDTLS_ERR_SSL_BAD_CERTIFICATE
Also, replace some instances of MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE
by MBEDTLS_ERR_SSL_DECODE_ERROR and MBEDTLS_ERR_SSL_ILLEGAL_PARAMETER
as fit.
Signed-off-by: Hanno Becker <hanno.becker@arm.com>
Also remove preprocessor logic for MBEDTLS_CONFIG_FILE, since
build_info.h alreadyy handles it.
This commit was generated using the following script:
# ========================
#!/bin/sh
git ls-files | grep -v '^include/mbedtls/build_info\.h$' | xargs sed -b -E -i '
/^#if !?defined\(MBEDTLS_CONFIG_FILE\)/i#include "mbedtls/build_info.h"
//,/^#endif/d
'
# ========================
Signed-off-by: Bence Szépkúti <bence.szepkuti@arm.com>
These macros were moved into a header and now check-names.sh is failing.
Add an MBEDTL_ prefix to the macro names to make it pass.
Signed-off-by: Janos Follath <janos.follath@arm.com>
The error is currently never returned to any function that PSA calls,
but keep mbedtls_to_psa_error up to date in case this changes.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The functions mbedtls_pk_sign(), mbedtls_pk_sign_restartable(),
mbedtls_ecdsa_write_signature() and mbedtls_ecdsa_write_signature_restartable()
now take an extra parameter indicating the size of the output buffer for the
signature.
No change to RSA because for RSA, the output size is trivial to calculate.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
We were already rejecting them at the end, due to the fact that with the
usual (x, z) formulas they lead to the result (0, 0) so when we want to
normalize at the end, trying to compute the modular inverse of z will
give an error.
If we wanted to support those points, we'd a special case in
ecp_normalize_mxz(). But it's actually permitted by all sources (RFC
7748 say we MAY reject 0 as a result) and recommended by some to reject
those points (either to ensure contributory behaviour, or to protect
against timing attack when the underlying field arithmetic is not
constant-time).
Since our field arithmetic is indeed not constant-time, let's reject
those points before they get mixed with sensitive data (in
ecp_mul_mxz()), in order to avoid exploitable leaks caused by the
special cases they would trigger. (See the "May the Fourth" paper
https://eprint.iacr.org/2017/806.pdf)
Signed-off-by: Janos Follath <janos.follath@arm.com>
Without this parameter, it would be hard for callers to know how many bytes
of output the function wrote into the output buffer. It would be possible,
since the cumulated output must have the same length as the cumulated input,
but it would be cumbersome for the caller to keep track.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The persistence level PSA_KEY_PERSISTENCE_READ_ONLY can now only be used
as intended, for keys that cannot be modified through normal use of the API.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_psa_get_stats() was written back before lifetimes were
structured as persistence and location. Fix its classification of
volatile external keys and internal keys with a non-default
persistence.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Clang was complaining and check-names.sh too
This only duplicates macros, so no impact on code size. In 3.0 we can
probably avoid the duplication by using an internal header under
library/ but this won't work for 2.16.
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
We were already rejecting them at the end, due to the fact that with the
usual (x, z) formulas they lead to the result (0, 0) so when we want to
normalize at the end, trying to compute the modular inverse of z will
give an error.
If we wanted to support those points, we'd a special case in
ecp_normalize_mxz(). But it's actually permitted by all sources
(RFC 7748 say we MAY reject 0 as a result) and recommended by some to
reject those points (either to ensure contributory behaviour, or to
protect against timing attack when the underlying field arithmetic is
not constant-time).
Since our field arithmetic is indeed not constant-time, let's reject
those points before they get mixed with sensitive data (in
ecp_mul_mxz()), in order to avoid exploitable leaks caused by the
special cases they would trigger. (See the "May the Fourth" paper
https://eprint.iacr.org/2017/806.pdf)
Signed-off-by: Manuel Pégourié-Gonnard <manuel.pegourie-gonnard@arm.com>
* development: (66 commits)
Document the return type change in the migration guide
Fix return type of example key export callbacks
Add change log
psa: mac: Add driver dispatch tests for psa_mac_verify
psa: mac: Add driver delegation support for psa_mac_verify()
psa: mac: Introduce psa_mac_compute_internal
psa: mac: Add driver dispatch tests for psa_mac_compute
psa: mac: Improve MAC finalization code
psa: mac: Add driver delegation support for psa_mac_compute()
psa: mac: Add MAC compute builtin implementation
psa: mac: Improve implementation of psa_mac_finalize_alg_and_key_validation()
psa: mac: Split psa_mac_setup()
psa: mac: Re-organize psa_mac_setup() internal function
Move export callback and context to the end of SSL context
Improve ChangeLog wording for key export
Remove return value from key export callback
Make key export callback and context connection-specific
Remove all occurrences of TLS < 1.2 PRF identifier
Remote key export identifier used for TLS < 1.2.
Add missing documentation for key export callback parameters
...
Ensure finish only called when encrypting and verify only called for
decrypting, and add tests to ensure this.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
I wrote a function to determine the base algorithm given a variant,
however this is already implemented by
PSA_ALG_AEAD_WITH_DEFAULT_LENGTH_TAG
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Where hashlen was previously ignored when the hash length could be
inferred from an md_alg parameter, the two must now match.
Adapt the existing tests accordingly. Adapt the sample programs accordingly.
This commit does not add any negative testing.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
The loop exits early iff there is a nonzero limb, so i==0 means that
all limbs are 0, whether the number of limbs is 0 or not.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix a bug introduced in "Fix multiplication producing a negative zero" that
caused the sign to be forced to +1 when A > 0, B < 0 and B's low-order limb
is 0.
Add a non-regression test. More generally, systematically test combinations
of leading zeros, trailing zeros and signs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In mbedtls_mpi_read_string, if the string is empty, return an empty bignum
rather than a bignum with one limb with the value 0.
Both representations are correct, so this is not, in principle, a
user-visible change. The change does leak however through
mbedtls_mpi_write_string in base 16 (but not in other bases), as it writes a
bignum with 0 limbs as "" but a bignum with the value 0 and at least one
limb as "00".
This change makes it possible to construct an empty bignum through
mbedtls_mpi_read_string, which is especially useful to construct test
cases (a common use of mbedtls_mpi_read_string, as most formats use in
production encode numbers in binary, to be read with mbedtls_mpi_read_binary
or mbedtls_mpi_read_binary_le).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix mbedtls_mpi_mul_mpi() when one of the operands is zero and the
other is negative. The sign of the result must be 1, since some
library functions do not treat {-1, 0, NULL} or {-1, n, {0}} as
representing the value 0.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Shifting TA and TB before the loop is not necessary. If A != 0, it will be
done at the start of the loop iteration. If A == 0, then lz==0 and G is
correctly set to B after 0 loop iterations.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix a null pointer dereference in mbedtls_mpi_exp_mod(X, A, N, E, _RR) when
A is the value 0 represented with 0 limbs.
Make the code a little more robust against similar bugs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
* development: (236 commits)
Changing the key length to 32 bytes in one of the PSA cipher setup tests
Removal of RC4 certs and fixes to docs and tests
Fix fd range for select on Windows
Refactor file descriptor checks into a common function
Removing global variable and moving variant function comment block
Fix typo in doc'n of session resumption API
Code review fixes
Fix warning in some configurations
Fix cmake build of fuzz_privkey
Fix async support in ssl_server2
Improve ChangeLog and migration guide entries
Use a proper DRBG in programs
Use the dedicated dummy_random in fuzzing programs
Fix cmake build of programs
Add ChangeLog and migration guide entries
Simplify internal code
Remove "internal RNG" code from ECP
Remove config option MBEDTLS_ECP_NO_INTERNAL_RNG
Add RNG params to private key parsing
Add RNG parameter to check_pair functions
...
